Abstract
Graphite materials are widely used as moderators, reflectors, and core structural materials in high-temperature gas-cooled reactors. During operation, graphite materials in nuclear reactors may be subjected to dynamic loads caused by earthquakes or other factors. Therefore, the dynamic fracture properties of graphite materials need to be investigated. In this study, dynamic three-point bending drop hammer impact experiments were conducted on IG-11 graphite specimens with precracks to measure their dynamic fracture toughness under medium- and low-speed impacts using a digital image correlation method. Traditional methods for measuring fracture toughness based on ASTM standards do not consider the influence of the inertial effect, leading to unreasonably large measurement results. To address this disadvantage, the dynamic fracture toughness of IG-11 graphite was evaluated using a spring–mass model that considers the inertial effects of materials. Results indicated that the measured fracture toughness was significantly lower than that obtained based on the ASTM standard and increased almost linearly with increasing impact velocity. The toughening mechanism was analysed by observing the fracture morphology of the samples using a scanning electron microscope. The results showed that as the impact velocity increased, the fracture mode of the graphite samples gradually changed from intergranular to transgranular fracture, and the samples absorbed sufficient energy, resulting in a noticeable toughening phenomenon.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
