Continuous multiphase Bunsen reactor of iodine-sulfur thermochemical water splitting cycles for hydrogen production: Experimental, Modelling and Design Insights

Abstract

Thermochemical water splitting cycles (TWSCs) hold promise for sustainable H2 production in future energy systems, with Iodine-Sulfur (IS) and Nickel-Iodine-Sulfur (NIS) processes standing out as efficient options. The core of both these processes lies in the Bunsen reaction, underscoring the need to identify optimal operational conditions and plant solutions for this crucial reaction section. Thus, in this study, a continuous counter-current flow Bunsen reactor fed with 5 NL h−1 of SO2 was constructed and tested. An inventive aspect was the introduction of solid I2 pellets from the top to enhance saturation at the liquid-liquid interface between sulfuric and hydriodic product phases, promoting segregation. This ingenious design achieved nearly complete SO2 conversion and optimal H2SO4 and HI concentrations in the respective product phases, while avoiding undesirable byproduct formation. The study further advanced the modelling of the experimental reactor by employing innovative kinetic and liquid-liquid equilibrium description approaches, and demonstrating exceptional validation accuracy of R2 = 0.9988. Additionally, with the aim of obtaining design charts as a potential tool for Bunsen reactor design, a microscopic model describing the gas phase trend along bubble or packed Bunsen-type reactors was developed. The model’s dimensionless analysis revealed a characteristic times ratio (Bu) comprehensively describing all the phenomena occurring to the gas phase within the Bunsen reaction section, and identified an optimal Bu value of 0.4 for pure SO2 gas inlet. Overall, the study's innovative strategies and models contribute significantly to the advancement of Bunsen reactor engineering.