Abstract
This study aims to determine the effect of mold temperature and melt temperature on fill time and quality prediction of tablespoon products. This product is made of plastic with Polystyrene (PS) product material and is produced by the injection molding method. This research was conducted using Autodesk Moldflow Advisor software. From the results of this study, it is known that the best parameter setting among the twelve data obtained is at a mold temperature of 55°C and melt temperature of 220°C with a fill time of 0.2169 s and a high quality prediction of 13.80%, a medium value of 86, 20%, and a low value of 0.00%, because the quality of the resulting product is better and the production time is smaller. So that it can make the production process more effective and efficient
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Berkala Penelitian Teknologi Kulit, Sepatu, dan Produk Kulit
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.