Влияние средств огнезащиты на интенсивность прогрева и особенности обугливания деревянных конструкций

Abstract

Introduction. Over the past decades, the sphere of wooden house construction has been undergoing revolutionary changes in relation to the development of large-scale construction using wood-based structures. In this regard, one of the first places is the direction associated with ensuring the fire-safe use of such structures in the construction of buildings and structures of various functional purposes. An important sector of this direction is various types and methods of fire protection for wood, materials and structures based on it. The lack of systematic research on these issues hinders the development of effective technical solutions for fire protection of wooden structures. Goals and objectives. Identification of priority areas for research in the field of fire protection of wood, materials and structures based on it. Development of effective flame retardants that can have an impact on reducing fire danger and increasing the fire resistance of wooden structures. Determination of the influence of various flame retardants on the intensity of the process of heating and charring of elements of wooden structures in conditions of fire exposure (fire). Methods. A standard muffle furnace of the SNOL type was used as a test installation with the possibility of one-sided radiation thermal effect on the sample surface and a uniform temperature increase in the furnace up to 1200 С. The muffle furnace was upgraded taking into account the horizontal fixing of the sample on the outer panel of the furnace. To measure the temperature by the thickness of the sample, a set of thermoelectric converters of type K (chromel-kopel) with a junction diameter of 0,8 mm was used. Results and their discussion. Based on the results of theoretical and experimental studies, the main directions of research on the possibility of using various methods and types of fire protection to achieve the required fire hazard characteristics and fire resistance of wooden structures were determined. During the study, the analysis of such characteristics of charring as the rate of charring, the thickness of the charred layer was carried out. Conclusion. The research results show the possibility of certain classes of flame retardants, intumescent and heat-protective materials not only to influence the intensity of the process of charring wood, but also to affect the properties and structure of the charred layer, as well as the intensity of heating of the inner layers of wooden structures. Key words: fire resistance, fire resistance limit, fire hazard, charring, heating intensity, flame retardant efficiency, wood, wooden structures, flame retardant coatings, flame retardants.