Zwitterionic Polymer Research Articles

Aerosolization of poly(sulfobetaine) microparticles that encapsulate therapeutic antibodies

Pulmonary delivery of protein therapeutics poses significant challenges that have not been well addressed in the research literature or practice. In fact, there is currently only one commercial protein therapeutic that is delivered through aerosolization and inhalation. In this study, we propose a drug delivery strategy that enables a high-concentration dosage for the pulmonary delivery of antibodies as an aerosolizable solid powder with desired stability. We utilized zwitterionic polymers for their promising properties as drug delivery vehicles and synthesized swellable, biodegradable poly(sulfo-betaine) (pSB) microparticles. The microparticles were loaded with Immunoglobulin G (IgG) as a model antibody. We quantified the microparticle size and morphology, and the particles were found to have an average diameter of 1.6 μm, falling within the optimal range (~1–5 μm) for pulmonary drug delivery. In addition, we quantified the impact of the crosslinker to monomer ratio on particle morphology and drug loading capacity. The results showed that there is a trade-off between desired morphology and drug loading capacity as the crosslinker density increases. In addition, the particles were aerosolized, and our data indicated that the particles remained intact and retained their initial morphology and size after aerosolization. The combination of morphology, particle size, antibody loading capacity, low cytotoxicity, and ease of aerosolization support the potential use of these particles for pulmonary delivery of protein therapeutics.

Biodegradable zwitterionic polymer-cloaked defective metal–organic frameworks for ferroptosis-inducing cancer therapy

Ferroptosis inhibits tumor growth by iron-dependently accumulating lipid peroxides (LPO) to a lethal extent, which can result from iron overload and glutathione peroxidase 4 (GPX4) inactivation. In this study, we developed biodegradable zwitterionic polymer-cloaked atorvastatin (ATV)-loaded ferric metal–organic frameworks (Fe-MOFs) for cancer treatment. Fe-MOFs served as nanoplatforms to co-deliver ferrous ions and ATV to cancer cells; the zwitterionic polymer membrane extended the circulation time of the nanoparticles and increased their accumulation at tumor sites. In cancer cells, the structure of the Fe-MOFs collapsed in the presence of glutathione (GSH), leading to the depletion of GSH and the release of ATV and Fe2+. The released ATV decreased mevalonate biosynthesis and GSH, resulting in GPX4 attenuation. A large number of reactive oxygen species were generated by the Fe2+-triggered Fenton reaction. This synergistic effect ultimately contributed to a lethal accumulation of LPO, causing cancer cell death. The findings both in vitro and in vivo suggested that this ferroptosis-inducing nanoplatform exhibited enhanced anticancer efficacy and preferable biocompatibility, which could provide a feasible strategy for anticancer therapy.

Design of anti-fouling membranes via prebiotic chemistry-inspired aminomalononitrile (AMN) coating strategy: Aldehyde-mediated chemical immobilization of pseudo-zwitterionic compounds

Although zwitterionic polymers were extensively explored for anti-fouling surface modification, the resulting significant loss in membrane permeability is undesirable. Assisted by co-deposition of aminomalononitrile (AMN) and terephthalaldehyde (TA), in this study a high-performance membrane with low fouling propensity was designed via chemical immobilization of a novel pseudo-zwitterionic compound, namely 3-(dimethyl(3-((3-sulfonatopropyl)ammonio)propyl)ammonio)propane-1-sulfonate (DMPDA-QS), onto the polyethersulfone (PES) substrate. The optimal membrane showed high water permeance (∼366 L m−2 h−1 bar−1) and high rejection (>98.0 %) to model proteins. The immobilization of this pseudo-zwitterionic compound led to a nearly neutral surface and enhanced hydrophilicity, and the dynamic fouling experiments proved its excellent antifouling performance against both negatively (i.e., bovine serum albumin, BSA) and positively (i.e., lysozyme, LYZ) charged foulants with flux recovery of >93% and >88% after 3-cycle filtration, respectively. A mathematical model was used to quantify the contribution of mass transfer resistance caused by reversible and irreversible fouling, showing nearly unchanged resistance of the modified membranes in contrast with 260% increase of the pristine PES after 3 filtration cycles. The developed fabrication strategy provided a viable and versatile route for designing high-performance antifouling membranes.

Controlled architecture of multi-defense anti-fouling forward osmosis membrane for efficient shale gas wastewater treatment

Forward osmosis (FO) membrane process facilitates effective treatment of shale gas wastewater (SGW) due to its tolerance to high salinity and exceptional separation performance. However, serious membrane fouling remains a challenge regarding the complexity of realistic SGW. To address the fouling issues, controlled block copolymer architecture was constructed on the FO membrane surface to achieve combined effect of oil-resistance, self-regenerating, and fouling mitigation. In the modification process, zwitterionic polymer with strong hydrophilicity and fluoropolymers with low surface energy were successively grafted to the membrane active layer by atom transfer radical polymerization. The outermost fluoropolymer layer with low surface energy imparts the membrane with anti-oil and self-regenerating capabilities. Meanwhile, the strong hydration effect of the zwitterionic polymer ensures that nonspecific foulants breaking through the outermost defense are kept away from the membrane surface. According to the Extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory, the modified FO membrane exhibited a significantly higher total interaction energy (ΔGTOT) compared to the pristine membrane when exposed to various types of model foulants (bovine serum albumin, humic acid, sodium alginate, mineral oil). Furthermore, the advantage of having multiple defense mechanisms was further substantiated through dynamic filtration tests with realistic SGW. In comparison to the pristine TFC membrane, the modified membrane not only experienced a much smaller decrease in water flux (reduced by 52%) during fouling but also an exceptional flux recovery after cleaning (∼97%). These findings underscore that the modified FO membranes greatly mitigated membrane fouling associated with SGW through the synergistic interplay between a zwitterionic polymer and a low surface energy material, highlighting its promising potential in SGW treatment via membrane technology.

Investigating cationic and zwitterionic successive multiple ionic-polymer layer coatings for protein separation by capillary electrophoresis

Successive multiple ionic-polymer layers (SMILs) have long since proved their worth in capillary electrophoresis as they ensure stable electroosmotic flow (EOF) and relatively high separation efficiency. Recently, we demonstrated that plotting the plate height (H) against the solute migration velocity (u) enabled a reliable quantitative evaluation of the coating performances in terms of separation efficiency. In this work, various physicochemical and chemical parameters of the SMIL coating were studied and optimized in order to decrease the slope of the ascending part of the H vs u curve, which is known to be controlled by the homogeneity in charge of the coating surface and by the possible residual solute adsorption onto the coating surface. SMILs based on poly(diallyldimethylammonium chloride) (PDADMAC) and poly(sodium styrene sulfonate) (PSS) were formed and the effect of each polyelectrolyte molar mass and of the number of polyelectrolyte layers (up to 21 layers) was studied. The use of polyethylene imine as an anchoring first layer was considered. More polyelectrolyte couples based on PDADMAC, polybrene, PSS, poly(vinyl sulfate), and poly(acrylic acid) were tested. Finally, zwitterionic polymers based on the poly(α-l-lysine) scaffold were synthesized and used as the last layer of SMILs, illustrating their ability to finetune the EOF, while maintaining good separation efficiency.

Efficient and Stable Organic Solar Cells Enabled by Backbone Engineering of Nonconjugated Polymer Zwitterion Interlayers

Efficient and Stable Organic Solar Cells Enabled by Backbone Engineering of Nonconjugated Polymer Zwitterion Interlayers

Biodegradable Zwitterionic Polymers as PEG Alternatives for Drug Delivery.

Poly(ethylene glycol) (PEG) is a highly biocompatible and water-soluble polymer that is widely utilized for biomedical applications. Unfortunately, the immunogenicity and antigenicity of PEG severely restrict the biomedical efficacy of pegylated therapeutics. As emerging PEG alternatives, biodegradable zwitterionic polymers (ZPs) have attracted significant interest in recent years. Biodegradable ZPs generally are not only water-soluble and immunologically inert, but also possess a range of favorable biomedically relevant properties, without causing long-term side effects for in vivo biomedical applications. This review presents a systematic overview of recent studies on biodegradable ZPs. Their structural designs and synthetic strategies by integrating biodegradable base polymers with zwitterions are addressed. Their applications in the delivery of small molecule drugs (as mono-drugs or multi-drugs) and proteins are highlighted.

Adhesive Sulfabetaine Polymer Hydrogels for the Sandwich Cell Culture.

Sandwich culture systems are techniques that cultivate cells by sandwiching them between the top and bottom substrates. Since the substrates can be separated, the system is expected to be applied to the construct layering of patterned cells and to the isolation of stacked cells. In this study, we prepared hydrogels composed of zwitterionic sulfabetaine polymers, poly[2-(2-(methacryloyloxyethyl)dimethylammonio)ethyl-1-sulfate] (PZBMA). The ZBMA homopolymers have been shown to form aggregates in aqueous solutions due to their intermolecular interactions. The water content of the PZBMA hydrogels in water was ∼70% regardless of N,N'-methylenebis(acrylamide), BIS, content as the cross-linker. The results indicated that the intermolecular interaction contributed more to the swelling behaviors than the chemical cross-linker. However, PZBMA hydrogels with 0.1 mol % BIS showed not only high elongation (∼850%) properties but also high adhesiveness and self-healing properties. When this PZBMA hydrogel was impregnated with collagen and subjected to sandwich culture using Madin-Darby canine kidney (MDCK) cells, a three-dimensional morphology of MDCK cell aggregates was constructed. Such a sulfabetaine hydrogel is expected to be developed for regenerative medicine.

High-density zwitterionic polymer brushes exhibit robust lubrication properties and high antithrombotic efficacy in blood-contacting medical devices

High-performance catheters are essential for interventional surgeries, requiring reliable anti-adhesive and lubricated surfaces. This article develops a strategy for constructing high-density sulfobetaine zwitterionic polymer brushes on the surface of catheters, utilizing dopamine and sodium alginate as the primary intermediate layers, where dopamine provides mussel-protein-like adhesion to anchor the polymer brushes to the catheter surface. Hydroxyl-rich sodium alginate increases the number of grafting sites and improves the grafting mass by more than 4 times. The developed high-density zwitterionic polymer brushes achieve long-lasting and effective lubricity (μ<0.0078) and are implanted in rabbits for four hours without bio-adhesion and thrombosis in the absence of anticoagulants such as heparin. Experiments and molecular dynamics simulations demonstrate that graft mass plays a decisive role in the lubricity and anti-adhesion of polymer brushes, and it is proposed to predict the anti-adhesion of polymer brushes by their lubricity to avoid costly and time-consuming bioassays during the development of amphoteric polymer brushes. A quantitative influence of hydration in the anti-adhesion properties of amphiphilic polymer brushes is also revealed. Thus, this study provides a new approach to safe, long-lasting lubrication and anticoagulant surface modification for medical devices in contact with blood. Statement of significanceHigh friction and bioadhesion on medical device surfaces can pose a significant risk to patients. In response, we have developed a safer, simpler, and more application-specific surface modification strategy that addresses both the lubrication and anti-bioadhesion needs of medical device surfaces. We used dopamine and sodium alginate as intermediate layers to drastically increase the grafting density of the zwitterionic brushes and enabled the modified surfaces to have an extremely low coefficient of friction (μ = 0.0078) and to remain non-bioadhesive for 4 hours in vivo. Furthermore, we used molecular dynamics simulations to gain insight into the mechanisms behind the superior anti-adhesion properties of the high-density polymer brushes. Our work contributes to the development and application of surface-modified coatings.

Surface Charge-Switchable Antifouling Block Copolymer with Bacteriostatic Properties.

Zwitterionic polymers are an emerging family of effective, low-fouling materials that can withstand unintended interactions with biological systems while exhibiting enhanced activity in bacterial matrix deterioration and biofilm eradication. Herein, we modularly synthesized an amphiphilic block copolymer, ZABCP, featuring potential bacteriostatic properties composed of a charge-switchable polyzwitterionic segment and a redox-sensitive pendant disulfide-labeled polymethacrylate block. The leucine-appended polyzwitterionic segment with alternatively positioned cationic amine and anionic carboxylate functionalities undergoes charge alterations (+ve → 0 → -ve) on pH variation. By introducing appropriate amphiphilicity, ZABCP forms distinct vesicles with redox-sensitive bilayer membranes and zwitterionic shielding coronas, enabling switching of surface charge. ZABCP vesicles exhibit 180 ± 20 nm hydrodynamic diameter, and its charge switching behavior in response to pH was confirmed by the change of zeta potential value from -23 to +36 mV. The binding interaction between ZABCP vesicles with lysozyme and pepsin proteins strengthens when the surface charge shifts from neutral (pH 7.4) to either anionic or cationic. This surface-charge-switchable phenomenon paves the way for implementing cationic ZABCP vesicles for bacterial cell growth inhibition, which is shown by the pronounced transition of cellular morphology, including clustering, aggregation, or elongation as well as membrane disruption for both Bacillus subtilis (Gram-positive) and Escherichia coli (Gram-negative). Such enhanced bacteriostatic activity could be ascribed to a strong electrostatic interaction between cationic vesicles and negatively charged bacterial membranes, leading to cell membrane disruption. Overall, this study provides a tailor-made approach to adopt low-fouling properties and potential bacteriostatic activity using zwitterionic polymers through precise control of pH.

Surface Modification of Nanopores in an Anodic Aluminum Oxide Membrane through Dopamine-Assisted Codeposition with a Zwitterionic Polymer.

Surface modification through dopamine-assisted codeposition with functional zwitterionic polymers can provide a simple and one-step functionalization under ambient conditions with robust and stable dopamine-surface interactions to improve the hydrophilicity of nanoporous membranes, thereby expanding their applicability to nanofiltration, ion transport, and blood purification. However, a significant knowledge gap remains in our comprehension of the mechanisms underlying the formation and deposition of dopamine/polymer aggregated coatings within nanoscale confinement. This study explores a feasible method for membrane modification through the codeposition of dopamine hydrochloride (DA) and poly(sulfobetaine methacrylate) (PSBMA) on nanopores of anodic aluminum oxide (AAO) membranes. Our findings demonstrate that the aggregated coatings of DA and PSBMA nanocomposites can effectively deposit on the surfaces within cylindrical AAO nanopores, significantly enhancing the hydrophilicity of the nanoporous membranes. The morphology and homogeneity of the nanocomposite coatings within the nanopores are further investigated by varying PSBMA molecular weights and AAO pore sizes, revealing that higher molecular weights result in more uniform deposition. This work sheds light on understanding the codeposition of DA and zwitterionic polymers in nanoscale environments, highlighting a straightforward and stable surface modification process of nanoporous membranes involving functional polymers.

Zwitterionic Tröger's Base Microfiltration Membrane Prepared via Vapor-Induced Phase Separation with Improved Demulsification and Antifouling Performance.

The fouling of separation membranes has consistently been a primary factor contributing to the decline in membrane performance. Enhancing the surface hydrophilicity of the membrane proves to be an effective strategy in mitigating membrane fouling in water treatment processes. Zwitterionic polymers (containing an equimolar number of homogeneously distributed anionic and cationic groups on the polymer chains) have been used extensively as one of the best antifouling materials for surface modification. The conventional application of zwitterionic compounds as surface modifiers is intricate and inefficient, adding complexity and length to the membrane preparation process, particularly on an industrial scale. To overcome these limitations, zwitterionic polymer, directly used as a main material, is an effective method. In this work, a novel zwitterionic polymer (TB)-zwitterionic Tröger's base (ZTB)-was synthesized by quaternizing Tröger's base (TB) with 1,3-propane sultone. The obtained ZTB is blended with TB to fabricate microfiltration (MF) membranes via the vapor-induced phase separation (VIPS) process, offering a strategic solution for separating emulsified oily wastewater. Atomic force microscopy (AFM), scanning electron microscopy (SEM), water contact angle, and zeta potential measurements were employed to characterize the surface of ZTB/TB blended membranes, assessing surface morphology, charge, and hydrophilic/hydrophobic properties. The impact of varying ZTB levels on membrane surface morphology, hydrophilicity, water flux, and rejection were investigated. The results showed that an increase in ZTB content improved hydrophilicity and surface roughness, consequently enhancing water permeability. Due to the attraction of water vapor, the enrichment of zwitterionic segments was enriched, and a stable hydration layer was formed on the membrane surface. The hydration layer formed by zwitterions endowed the membrane with good antifouling properties. The proposed mechanism elucidates the membrane's proficiency in demulsification and the reduction in irreversible fouling through the synergistic regulation of surface charge and hydrophilicity, facilitated by electrostatic repulsion and the formation of a hydration layer. The ZTB/TB blended membranes demonstrated superior efficiency in oil-water separation, achieving a maximum flux of 1897.63 LMH bar-1 and an oil rejection rate as high as 99% in the oil-water emulsion separation process. This study reveals the migration behavior of the zwitterionic polymer in the membrane during the VIPS process. It enhances our comprehension of the antifouling mechanism of zwitterionic membranes and provides guidance for designing novel materials for antifouling membranes.

New Nano-Crystalline Hydroxyapatite-Polycarboxy/Sulfo Betaine Hybrid Materials: Synthesis and Characterization.

Hybrid materials based on calcium phosphates and synthetic polymers can potentially be used for caries protection due to their similarity to hard tissues in terms of composition, structure and a number of properties. This study is focused on the biomimetic synthesis of hybrid materials consisting of hydroxiapatite and the zwitterionic polymers polysulfobetaine (PSB) and polycarboxybetaine (PCB) using controlled media conditions with a constant pH of 8.0-8.2 and Ca/P = 1.67. The results show that pH control is a dominant factor in the crystal phase formation, so nano-crystalline hydroxyapatite with a Ca/P ratio of 1.63-1.71 was observed as the mineral phase in all the materials prepared. The final polymer content measured for the synthesized hybrid materials was 48-52%. The polymer type affects the final microstructure, and the mineral particle size is thinner and smaller in the synthesis performed using PCB than using PSB. The final intermolecular interaction of the nano-crystallized hydroxyapatite was demonstrated to be stronger with PCB than with PSB as shown by our IR and Raman spectroscopy analyses. The higher remineralization potential of the PCB-containing synthesized material was demonstrated by in vitro testing using artificial saliva.

A Versatile Approach for the Synthesis of Antimicrobial Polymer Brushes on Natural Rubber/Graphene Oxide Composite Films via Surface-Initiated Atom-Transfer Radical Polymerization.

A simple strategy was adopted for the preparation of an antimicrobial natural rubber/graphene oxide (NR/GO) composite film modified through the use of zwitterionic polymer brushes. An NR/GO composite film with antibacterial properties was prepared using a water-based solution-casting method. The composited GO was dispersed uniformly in the NR matrix and compensated for mechanical loss in the process of modification. Based on the high bromination activity of α-H in the structure of cis-polyisoprene, the composite films were brominated on the surface through the use of N-bromosuccinimide (NBS) under the irradiation of a 40 W tungsten lamp. Polymerization was carried out on the brominated films using sulfobetaine methacrylate (SBMA) as a monomer via surface-initiated atom transfer radical polymerization (SI-ATRP). The NR/GO composite films modified using polymer brushes (PSBMAs) exhibited 99.99% antimicrobial activity for resistance to Escherichia coli and Staphylococcus aureus. A novel polymer modification strategy for NR composite materials was established effectively, and the enhanced antimicrobial properties expand the application prospects in the medical field.

Antifouling strategies for electrochemical sensing in complex biological media.

Surface fouling poses a significant challenge that restricts the analytical performance of electrochemical sensors in both in vitro and in vivo applications. Biofouling resistance is paramount to guarantee the reliable operation of electrochemical sensors in complex biofluids (e.g., blood, serum, and urine). Seeking efficient strategies for surface fouling and establishing highly sensitive sensing platforms for applications in complex media have received increasing attention in the past. In this review, we provide a comprehensive overview of recent research efforts focused on antifouling electrochemical sensors. Initially, we present a detailed illustration of the concept about biofouling along with an exploration of four key antifouling mechanisms. Subsequently, we delve into the commonly employed antifouling strategies in the fabrication of electrochemical sensors. These encompass physical surface topography (micro/nanostructure coatings and filtration membranes) and chemical surface modifications (PEG and its derivatives, zwitterionic polymers, peptides, proteins, and various other antifouling materials). The progress in antifouling electrochemical sensors is proposed concerning the antifouling mechanisms as well as sensing capability assessments (e.g., sensitivity, stability, and practical application ability). Finally, we summarize the evolving trends in the field and highlight some key remaining limitations.

A Sweat Absorbing Skin Electrode for Electrophysiology During Exercise

AbstractElectrophysiological signals are commonly used to assess health performance, providing valuable information on body status. However, stable signal acquisition by commercial Ag/AgCl gel or metal electrodes is susceptible to electrode/skin interface interferences due to perspiration and motion during exercise. To address this challenge, herein a sweat absorbing skin electrode (SAE) is designed, which can not only become softer and more adhesive but also enhance conductivity after sweat during exercise. The resulting stable interface between SAE/skin after sweat enables accurate and continuous electrophysiological measurement during exercise. SAE is demonstrated by assembly of MXene (Ti3C2TX) aerogel and zwitterionic polymer, where Ti3C2TX aerogel works as conductive skeleton and zwitterionic polymer endows skin conformability as well as expediting interfacial charge transfer by the inherent ions. SAE can monitor a variety of electrophysiological signals during exercise. As an example, electromyogram (EMG) signals are acquired to assess muscle fatigue, which is impossible by commercial gel electrodes. Via machine learning, the correlation between EMG and physiological markers (body fat percentage (BF) and body mass index (BMI)) are constructed. The research shows that sweat‐absorbing SAEs can reliably monitor electrophysiological signals during exercise, such as muscle status, leading to evidence‐based scientific guidelines for sports and rehabilitation training.

Formation of Amphiphilic Zwitterionic Thin Poly(SBMA-co-TFEMA) Brushes on Solid Surfaces for Marine Antifouling Applications.

Water molecules can bind to zwitterionic polymers, such as carboxybetaine and sulfobetaine, forming strong hydration layers along the polymer chains. Such hydration layers act as a barrier to impede the attachment of marine fouling organisms; therefore, zwitterionic polymer coatings have been of considerable interest as marine antifouling coatings. However, recent studies have shown that severe adsorption of marine sediments occurs on zwitterionic-polymer-coated surfaces, resulting in the degradation of their marine antifouling performance. Therefore, a novel approach for forming amphiphilic zwitterionic polymers using zwitterionic and hydrophobic monomers is being investigated to simultaneously inhibit both sediment adsorption and marine fouling. In this study, amphiphilic zwitterionic thin polymer brushes composed of sulfobetaine methacrylate (SBMA) and trifluoroethyl methacrylate (TFEMA) were synthesized on Si/SiO2 surfaces via surface-initiated atom transfer radical polymerization. For this, a facile metal-ion-mediated method was developed for immobilizing polymerization initiators on solid substrates to subsequently form poly(SBMA-co-TFEMA) brushes on the initiator-coated substrate surface. Poly(SBMA-co-TFEMA) brushes with various SBMA/TFEMA ratios were prepared to determine the composition at which both marine diatom adhesion and sediment adsorption can be prevented effectively. The results indicate that poly(SBMA-co-TFEMA) brushes prepared with an SBMA/TFEMA ratio of 3:7 effectively inhibit both sediment adsorption and marine diatom adhesion, thereby exhibiting balanced marine antifouling properties. Thus, the findings of this study provide important insights into the design of amphiphilic marine antifouling materials.

Intrinsically Antifouling, soft and conformal bioelectronic from scalable fabrication of Thin-Film OECT arrays by zwitterionic polymers

Thin-film bioelectronic arrays, emerging as a new medical tool, offers significant opportunities for health monitoring, medical diagnosis, medical treatment, life science studies, etc. Thin film devices face several challenges, including biofouling which hinders targeted electrocoupling in complex biological environments, high surface Young's modulus that causes mechanical mismatches with biological matter, and poor surface adhesion that makes it difficult to conform to undeveloped biosurfaces. Here, we developed a universal lithography fabrication platform with high yield, uniformity, and precision to prepare a biomimetic thin-film organic electrochemical transistor (OECT) array featuring intrinsic biofouling resistance, tissue-like surface softness, and strong adhesion to undeveloped surfaces. This fabrication platform is based on the photolithography fabrication of zwitterionic-polymer-based conducting channels and hermetic encapsulation systems without compromising their electrical properties and low permeability. The all-zwitterionic feature softens the surface and helps prevent proteins and cells from approaching the encapsulation and channel surface, thus protecting the OECT array from interference from nonspecific protein and cell interactions. The strong capillary force from the hydrated zwitterions drives the thin-film device to conform well on nonplanar surfaces. Utilizing this biomimetic device, we successfully demonstrated cell-selective electrocoupling in the presence of white blood cells (WBCs) and simultaneously realized close and stable on-skin electrocardiogram (ECG) monitoring via good skin contact and robust epidermal surface lipid resistance. We envision that our process would provide a versatile platform for producing antifouling and flexible bioelectronic devices that seamlessly integrate with biological systems, and promote the practical application of thin-film bioelectronic arrays in real-life scenarios.

Embedding Thiols into Choline Phosphate Polymer Zwitterions.

The compositional scope of polymer zwitterions has grown significantly in recent years and now offers designer synthetic materials that are broadly applicable across numerous areas, including supracolloidal structures, electronic materials interfaces, and macromolecular therapeutics. Among recent developments in polymer zwitterion syntheses are those that allow insertion of reactive functionality directly into the zwitterionic moiety, yielding new monomer and polymer structures that hold potential for maximizing the impact of zwitterions on the macromolecular materials chemistry field. This manuscript describes the preparation of zwitterionic choline phosphate (CP) methacrylates containing either aromatic or aliphatic thiols embedded directly into the zwitterionic moiety. The polymerization of these functional CP methacrylates by reversible addition-fragmentation chain-transfer methodology yields polymeric zwitterionic thiols containing protected thiol functionality in the zwitterionic units. After polymerization, the protected thiols are liberated to yield thiol-rich polymer zwitterions which serve as precursors to subsequent reactions that produce polymer networks as well as polymer-protein bioconjugates.

Fine Tuning Water States in Hydrogels for High Voltage Aqueous Batteries.

Hydrogels are widely used as quasi-solid-state electrolytes in aqueous batteries. However, they are not applicable in high-voltage batteries because the hydrogen evolution reaction cannot be effectively suppressed even when water is incorporated into the polymer network. Herein, by profoundly investigating the states of water molecules in hydrogels, we designed supramolecular hydrogel electrolytes featuring much more nonfreezable bound water and much less free water than that found in conventional hydrogels. Specifically, two strategies are developed to achieve this goal. One strategy is adopting monomers with a variety of hydrophilic groups to enhance the hydrophilicity of polymer chains. The other strategy is incorporating zwitterionic polymers or polymers with counterions as superhydrophilic units. In particular, the nonfreezable bound water content increased from 0.129 in the conventional hydrogel to >0.4 mg mg-1 in the fabricated hydrogels, while the free water content decreased from 1.232 to ∼0.15 mg mg-1. As a result, a wide electrochemical stability window of up to 3.25 V was obtained with the fabricated hydrogels with low concentrations of incorporated salts and enhanced hydrophilic groups or superhydrophilic groups. The ionic conductivities achieved with our developed hydrogel electrolytes were much higher than those in the conventional highly concentrated salt electrolytes, and their cost is also much lower. The designed supramolecular hydrogel electrolytes endowed an aqueous K-ion battery (AKIB) system with a high voltage plateau of 1.9 V and contributed to steady cycling of the AKIB for over 3000 cycles. The developed supramolecular hydrogel electrolytes are also applicable to other batteries, such as aqueous lithium-ion batteries, hybrid sodium-ion batteries, and multivalent-ion aqueous batteries, and can achieve high voltage output.