Zn Levels Research Articles

Application of Pyroligneous Acid as a Plant Growth Stimulant Can Improve the Nutritional Value of Soybean Seed

Farmers today are using biochemical treatments to improve their crop yields. Commercialized organic biostimulants exist in the form of pyroligneous acid generated by burning agricultural waste products. During the 2023 growing season, we demonstrated that soil treatment with a commercial pyroligneous acid product, Coriphol™, manufactured by Corigin Solutions, Inc., stimulated plant growth and significantly improved yield with an optimal treatment dose of 2 gal. acre−1. In the present work, we examined the effect of this treatment on soybean nutritional content using seed harvested from the 2023 season. Total mean seed protein content for untreated control plants was 32.26 ± 0.49% of dry mass and increased 10.8% to 35.64 ± 0.64% with treatment. This increase resulted in a net reduction in total free amino acid content, although levels of the essential dietary amino acid, lysine, were boosted 6-fold. Total lipid content was unaffected by treatment with mean levels of 21.61 ± 0.70% of dry mass noted. Treatment, however, reduced saturated fatty acid content by roughly 40%, and reduced the polyunsaturated content of linoleic acid in favor of the monounsaturated fatty acid, oleic acid. Finally, Coriphol™ treatment did not impact seed content of eight essential micronutrients including Na, Mg, K, Ca, Fe, Ni, Cu, and Mo, but did significantly boost Zn and Mn levels. Altogether, these results demonstrate that soil treatment with the growth stimulant Coriphol™ has the potential to improve the dietary nutritional value of soybean.

Unveiling the NLO Potential of New Zn (II) Complex of 6‐Methylpyridine‐2‐Carboxaldehyde: Experimental/DFT Study on Spectral, Static, and Frequency‐Dependent Linear/Nonlinear Optical Parameters

ABSTRACTOngoing exploration focuses on synthesizing and characterizing coordination compounds to improve the design of nonlinear optical (NLO)‐based materials. In this regard, to examine spectral and static/frequency–dependent linear/NLO parameters, the new Zn (II) complex {[Zn(6‐MePyAld)2(Cl)]; 6‐MePyAld: 6‐methylpyridine‐2‐carboxaldehyde} was synthesized and characterized by using 1H and 13C NMR, mass (LC‐HRMS), powder XRD, and FTIR spectra. The electronic features of synthesized complex were investigated by considering the TD‐CAM‐B3LYP/ and TD‐M06L/6‐311G(d,p)//LanL2DZ levels of time‐dependent density functional theory (TD‐DFT). Moreover, the theoretical linear optical (LO), second‐, and third‐order NLO susceptibility tensors/polarization (χ(1)/P(1), χ(2)/P(2), χ(3)/P(3)) parameters for the Zn (II) complex were computed using the DFT/M06L and DFT/CAM‐B3LYP levels. The external electric field (E), polarization (P), and electric displacement (D) values of the Zn (II) complex were also calculated using the same DFT levels. To investigate microscopic LO (isotropic polarizability <α(0;0)>/<α(−ω;ω)>, and anisotropic polarizability (∆α (0;0)/∆α (−ω;ω)) and second‐/third‐order NLO (<β(0;0,0)>/<β(−ω;ω,0), <β(−2ω;ω,ω)>/<γ(0;0,0,0)>/<γ(−ω;ω,0,0)> and <γ(−2ω;ω,ω,0)>) parameters for the Zn (II) complex, the DFT/M06L and DFT/CAM‐B3LYP levels in the gas phase were used. The ∆α (0;0), ∆α (−ω;ω), <β(0;0,0)>, <β(−ω;ω,0)>, and <β(−2ω;ω,ω)> for Zn (II) complex were computed at 17.288 × 10−24, 21.782 × 10−24, 14.692 × 10−30, 466.80 × 10−30, and 210.79 × 10−30 esu, respectively, by using the DFT/CAM‐B3LYP level. Moreover, the <γ(0;0,0,0)>/<γ(−ω;ω,0,0)> and <γ(−2ω;ω,ω,0)> in the gas phase computed at the DFT/CAM‐B3LYP level for Zn (II) complex were obtained at 129.74 × 10−36, 3997.6 × 10−36, and −886.60 × 10−36 esu, in turn. According to the CAM‐B3LYP level, the <γ(0;0,0,0)> value is 8.65 and 18.53 times higher than the values of para‐nitroaniline (pNA) and urea, respectively. The obtained static/dynamic β and γ values of Zn (II) complex are greater than those of urea and pNA. Zn (II) complex exhibited remarkably microscopic second‐order and particularly third‐order NLO features. It is predicted that our study will shed light on NLO materials that might be used in telecommunication and optoelectronics.

Development of a 7000 series aluminium alloy suitable for laser-based Additive Manufacturing

High strength aluminium alloys are of significant interest for laser-based Additive Manufacturing as they can provide a high specific strength but have limited assembly possibilities due to poor weldability and the presence of large intermetallic particles challenging the conventional manufacturing route. Increasing the geometrical freedom by enabling their use with laser-based Additive Manufacturing would create new possibilities. This study investigates the possibilities of using an aluminium 7000 series alloy with Laser Powder Bed Fusion (L-PBF) and secondly for comparison with Direct Energy Deposition (DED). The chemical composition targets 5.1–6.1 wt% Zn and 2.1–3.9 wt% Mg. The level of Zn and Mg in the powder was increased to 10 wt% Zn and 3 wt% Mg to compensate for the expected evaporation during the laser-based AM process and guarantee a sufficient Zn and Mg content for precipitation strengthening. Solidification cracking in the initial alloy composition was resolved by the addition of 1 wt% Zr and 1 wt% V. For L-PBF, a study of the impact of the laser spot size showed a larger spot size is beneficial to improve the process stability. A study of the capability of preheating and of slowing down the process showed both further improve the process stability as well which is required to manufacture successfully larger parts to characterise the quasi-static tensile properties. For optimal process parameters for a fast process, meaning a scan speed of 700 mm/s, a yield stress of 425 ± 7 MPa and an ultimate tensile strength of 442 ± 5 MPa was obtained after a homogenisation and ageing heat treatment. In the as built state, the strength was significantly lower. For optimal process parameters for a slow process, meaning a scan speed of 250 mm/s, a yield stress of 398 ± 11 MPa and an ultimate tensile strength of 440 ± 16 MPa were obtained in as built state. For DED the mechanical properties of the alloy showed to be significantly dependent on process parameters. An excessive energy input results in more Zn and Mg evaporation and decreased cooling rates. Such parameters also impact the process stability of DED throughout the build cycle. Limiting the energy input resulted in dense samples and stable build cycles which after a heat treatment to peak ageing reached a yield stress of around 400 MPa and an ultimate tensile stress of around 440 MPa in the X- and Z-direction.

Metal variability of the shrimp Palaemon elegans across coastal zones: anthropogenic and geological impacts.

This study focused on 120 specimens of the shrimp Palaemon elegans collected in intertidal zones in eight selected areas. This study aimed to assess the suitability of P. elegans as a bioindicator of natural and anthropogenic marine pollution. Metal concentrations of aluminum (Al), cadmium (Cd), copper (Cu), iron (Fe), lead (Pb), and zinc (Zn) were measured in shrimp collected from various sites in the Canary Islands, including areas affected by volcanic activity, industrial activity, and control zones. The determination of metal concentrations was conducted using inductively coupled plasma optical emission spectrophotometry (ICP-OES). The results showed significant differences in metal concentrations across the studied sites, with the highest levels of Al, Cu, Fe, Pb, and Zn observed in areas impacted by the Tajogaite volcanic eruption and harbor activity. Sites near old landfills and sewage pipes also exhibited elevated levels of Cd, Cu, and Pb, indicating strong anthropogenic influence. Al was found in the highest concentration in Harbour, reaching 25.7 ± 6.2mg/kg, while the lowest concentration was observed in Control Lp at 11.5 ± 0.69mg/kg. Conversely, lower metal concentrations were detected in control zones and areas with high dinoflagellate presence, suggesting a potential role of bioremediation by marine phytoplankton. The ability of P. elegans to accumulate metals in its tissues, particularly in areas of high pollution, highlights its potential as a bioindicator species. This study underscores the importance of P. elegans in monitoring marine pollution and provides insights into the environmental impact of both natural and human-induced contamination on coastal ecosystems.

Leveraging machine learning for sustainable cultivation of Zn-enriched crops in Cd-contaminated karst regions

Karst soils often exhibit elevated zinc (Zn) levels, providing an opportunity to cultivate Zn-enriched crops. (meanwhile) However, these soils also frequently contain high background levels of toxic metals, particularly cadmium (Cd), posing potential health risks. Understanding the bioaccumulation of Cd and Zn and the related drivers in a high geochemical background area can provide important insights for the safe development of Zn-enriched crops. Traditional models often struggle to accurately predict metal levels in crop systems grown on soils with high geochemical background. This study employed machine learning models, including Random Forest (RF), Support Vector Machine (SVM), and Extreme Gradient Boosting (XGBoost), to explore effective strategies for sustainable cultivation of Zn-enriched crops in karst regions, focusing on bioaccumulation factors (BAF). A total of 10,986 topsoil samples and 181 paired rhizosphere soil-crop samples, including early rice, late rice, and maize, were collected from a karst region in Guangxi. The SVM and XGBoost models demonstrated superior performance, achieving R2 values of 0.84 and 0.60 for estimating the BAFs of Zn and Cd, respectively. Key determinants of the BAFs were identified, including soil iron and manganese contents, pH level, and the interaction between Zn and Cd. By integrating these soil properties with machine learning, a framework for the safe cultivation of Zn-enriched crops was developed. This research contributes to the development of strategies for mitigating Zn deficiency in crops grown on Cd-contaminated soils.

The five homologous CiaR-controlled Ccn sRNAs of Streptococcus pneumoniae modulate Zn-resistance.

Zinc is a vital transition metal for all bacteria; however, elevated intracellular free Zn levels can result in mis-metalation of Mn-dependent enzymes. For Mn-centric bacteria such as Streptococcus pneumoniae that primarily use Mn instead of Fe as an enzyme cofactor, Zn is particularly toxic at high concentrations. Here, we report our identification and characterization of the function of the five homologous, CiaRH-regulated Ccn sRNAs in controlling S. pneumoniae virulence and metal homeostasis. We show that deletion of all five ccn genes (ccnA, ccnB, ccnC, ccnD, and ccnE) from S. pneumoniae strains D39 (serotype 2) and TIGR4 (serotype 4) causes Zn hypersensitivity and an attenuation of virulence in a murine invasive pneumonia model. We provide evidence that bioavailable Zn disproportionately increases in S. pneumoniae strains lacking the five ccn genes. Consistent with a response to Zn intoxication or relatively high intracellular free Zn levels, expression of genes encoding the CzcD Zn exporter and the Mn-independent ribonucleotide reductase, NrdD-NrdG, were increased in the ΔccnABCDE mutant relative to its isogenic ccn+ parent strain. The growth inhibition by Zn that occurs as the result of loss of the ccn genes is rescued by supplementation with Mn or Oxyrase, a reagent that removes dissolved oxygen. Lastly, we found that the Zn-dependent growth inhibition of the ΔccnABCDE strain was not altered by deletion of sodA, whereas the ccn+ ΔsodA strain phenocopied the ΔccnABCDE strain. Overall, our results indicate that the Ccn sRNAs have a crucial role in preventing Zn intoxication in S. pneumoniae.

First report of metals and metalloids on bone and claw tissues of Humboldt penguins (Spheniscus humboldti)

Samples of bones (humerus) and claws of adult Humboldt penguins (Spheniscus humboldti) were opportunistically obtained from twenty-seven carcasses at two important nesting sites in northern Chile: Chañaral Island (CHI) and Pan de Azúcar Island (PAI). The concentrations of trace elements (Cu, Zn, Pb, Ni, Fe, Se, As, Br, Mn and Cr) were determined by X-ray fluorescence. The highest levels (mean ± standard deviation, micrograms/g dry weight) of Cu (26.57 ± 4.08), Zn (163.9 ± 42.7), Pb (1.86 ± 1.53), Ni (0.31 ± 0.03), Se (7.70 ± 4.87) and Cr (0.25 ± 0.24) were detected in bones, whereas the highest levels of Fe (3,162 ± 1,579), As (6.75 ± 4.21), Br (0.12 ± 0.06) and Mn (76.7 ± 47.9) were found in claws. In bones, Se and Ni levels were higher (P < 0.05) in CHI than in PAI. In claws, the contents of Pb, Fe, and Mn were higher at CHI than those at PAI, whereas only As exhibited higher contents at PAI than those found at CHI. The trace element content in the claws and bones found herein may be the result of either acute or chronic exposure to penguins, respectively. These findings may serve as a baseline for further studies to design adequate and opportune plans to protect this vulnerable species.

Assessment of the intake of essential elements by consumption of meat and liver from moose (Alces alces) and wild boar (Sus scrofa) inhabiting the north-west of Russia

This study aimed to analyze the concentrations of the essential elements (Co, Cu, Fe, Mg, Mn, and Zn) in the edible tissues (muscle=meat, liver) of the large game mammals (moose Alces alces L. (n=17) and wild boar Sus scrofa L. (n=46)) and to assess the nutritional values of these food products through the fulfillment of Dietary Reference Values (DRVs) for the aforementioned elements. The values of most of the elements measured in the animals' tissues were either comparable to or greater than those observed in domestic animals and the same species from other countries. No significant species-dependent differences were observed in the meat for the studied elements, but the concentrations of Co, Cu, and Mn were higher, and the levels of Fe and Zn were lower in the moose liver compared to the wild boar liver. According to DRVs for adults, the game meat and liver are poor sources of Co, Cu (except liver), Mg, and Mn. However, the consumption of liver from studied species meets the adult requirements for Cu (moose) and Fe (moose and wild boar). Both the meat and liver of game animals may be considered as good sources of Zn.

Interaction Effects of Phosphorus and Zinc Application on Their Availability and Growth of Rice (<em>Oryza sativa</em>) in an Alfisol of Sri Lanka

This study investigated the interactive effects of phosphorus (P) and zinc (Zn) application on P and Zn availability, and growth of rice (Oryza sativa) in an Alfisol. In a laboratory incubation experiment, soil samples were supersaturated with treatment solutions with all possible combinations of four P levels (0, 6, 12, and 24 mg kg-1 equivalent to 0, 10, 20, and 40 kg ha-1, respectively) and three Zn levels (0, 1.2, and 2.4 mg kg-1 equivalent to 0, 2, and 4 kg ha-1, respectively), and then allowed to air-dry. Available P and Zn contents in soil increased as the application rates were increased but P×Zn rate interaction effect was not significant. In a pot experiment, rice (var Bg 358) was grown for 10 weeks with all possible combinations of three P levels (0, 5.5, and 16.5 mg kg-1) and three Zn levels (0, 1, and 2 mg kg-1). Initial soil P was higher than the critical level (12 mg kg-1), but available Zn was below the critical level (1.5 mg kg-1). The main effect of P rate did not significantly affect the number of tillers and shoot dry matter content while Zn application decreased them. Root dry matter, and root and shoot P concentrations were significantly (P<0.05) influenced by P×Zn rate interaction effect. While, plant P uptake was significantly decreased due to P and Zn application, plant Zn uptake was not affected. Therefore, for a better growth of rice plant, the soils with high available P and low Zn contents should be carefully fertilized with P and Zn fertilizers.

Genesis of the Kateba’asu gold deposit, Western Tianshan, China: Constraints from pyrite trace element, sulfur isotope, and quartz H-O isotopes

The Kateba’asu gold deposit, situated in the Western Tianshan of China, is one of the most significant discoveries in the world-class Tianshan gold belt. The deposit features two distinct mineralization styles. The early, subordinate skarn-type copper–gold mineralization occurs in the contact zone between monzogranite, diorite, and Silurian limestone, composed of garnet, diopside, epidote, chalcopyrite, pyrite, and gold. The later, primary lode-gold mineralization is hosted in the altered monzogranite characterized by pervasive quartz-pyrite-sericite-chlorite-K-feldspar alteration and a well-develped veining systems.Pyrite is the dominant sulfide mineral related to gold mineralization in the Kateba’asu gold deposit, with four types identified: Py0 from the early skarn copper–gold mineralization, and Py1 to Py3 from the later lode-gold mineralization. All types of pyrite are homogeneous and contain very low levels of lattice-bound gold. Py0 is euhedral and fine-grained, with relatively high Cu, Au, Co, and Ni contents, and displays a magmatic sulfur isotopic signature with δ34S ranging from 0.8 to 4.3 ‰. Py1 occurs as euhedral to subhedral, coarse-grained crystals within pyrite-quartz veins with higher concentrations of Co and Ni. Py2, which develops in the quartz-pyrite veins, is medium to coarse-grained and contains elevated levels of As, Cu, Zn, and Bi relative to Py1. Py3, found in polymetallic sulfide veins of the main lode-gold stage, is anhedral and medium to fine-grained with higher contents of As, Ag, Cu, Zn, Se, Te and lowest Co and Ni concentrations compared to Py1 and Py2. The positive correlations between Au-Te, Au-Bi, Au-Cu, and Pb-Bi across all pyrite types, along with the presence of visible gold in Py3, indicate that most gold occurs as micro-/nano-sized inclusions and as fissure gold. The δ34S values of Py1, Py2, and Py3 (7.6 to 11.8 ‰, 10.1 to 12.6 ‰, and 9.8 to 12.4 ‰, respectively) were attributed to an initial magmatic source and mixed with external sulfur subsequently from the wall rocks. The H and O isotopic compositions (δDH2O = −84.1 to −93.5 ‰; δ18OH2O = 1.8 to 6.6 ‰) of quartz from the lode-gold mineralization imply that ore-forming fluids were predominantly of magmatic origin, with a additional contribution from meteoric water. Taken together, a two-episode mineralization model was proposed for the formation of the Kateba’asu gold deposit. The early skarn mineralization stage is associated with the emplacement of diorite during the Early Carboniferous. In contrast, the subsequent lode-gold mineralization, occurring between the Late Carboniferous and Permian periods, represents a overprinted magmatic-hydrothermal gold system potentially linked to a deep-seated magmatic intrusion.

Method validation of an inductively coupled plasma mass spectrometry (ICP-MS) assay for the analysis of magnesium, copper and zinc in red blood cells

BackgroundLaboratory measurements of trace elements such as magnesium (Mg), copper (Cu), and zinc (Zn) in red blood cells (RBCs) are essential for assessing nutritional status and diagnosing metal toxicity. The purpose of this study was to develop and validate an ICP-MS method for quantifying these elements in RBCs. MethodsPacked RBCs were aliquoted and diluted in an alkaline diluent solution containing internal standards, 0.1 % Triton X-100, 0.1 % EDTA, and 1 % ammonium hydroxide. The resulting diluted specimen was analyzed using inductively coupled plasma mass spectrometry (ICP-MS) to quantitatively determine the levels of Mg, Cu, and Zn. The method underwent validation for accuracy, precision, method comparison, linearity, analytical sensitivity, and carryover. Additionally, retrospective data were analyzed, and non-parametric reference intervals were calculated. ResultsAccuracy and linearity fell within the expected range of ≤±15 % for all analytes. Within-run, between-run, and total imprecision were ≤15 % coefficient of variation. All other validation experiments met the established acceptance criteria. Retrospective data analysis was conducted on patient samples using the method. The application of Tukey’s HSD test for multiple comparisons revealed statistically significant mean differences (p < 0.05) in Mg, Cu, and Zn concentrations between all pairwise groups of age and sex, except for the mean Cu concentration in adult males versus females and the mean Mg concentrations in adult versus minor males. ConclusionsThe presented method was successfully validated and met the criteria for clinical use. Retrospective data analysis of patient results demonstrated the method’s suitability for assessing nutritional deficiency and toxicity.

Evaluation of Oxidative Stress, Anti-Oxidant, Vitamins and Co-Factor Elements in The Sera of Gastric Cancer in Iraqi Patients.

The objective of this study is to analyze oxidative stress markers Total Oxidant Status (TOS) and total Antioxidant Status (TAS), assess antioxidant levels (vitamin C, E), and evaluate co-factor element profiles zinc (Zn), copper (Cu), iron (Fe) in the serum of Iraqi gastric cancer patients. By elucidating these relationships, the research aims to enhance knowledge on oxidative stress, dietary factors, and potential therapeutic approaches for managing nutritional imbalances in this cohort. The study included 60 gastric cancer patients and 60 matched controls. Blood samples were collected and serum was extracted for analysis of TOS, TAS, Vitamin C, Vitamin E, copper, zinc, and iron levels. Measurements were conducted using spectrophotometry and ELISA kits from various companies. Statistical analysis was performed with IBM SPSS 25.0, presenting results as means ± SD, and differences between groups were assessed via independent samples t-test at p < 0.05 and p ≤ 0.01. The study results indicated statistically significant differences between gastric cancer patients and controls in various biomarkers, with all comparisons showing p-values less than 0.001. This suggests strong evidence for the observed differences between the two groups in (TOS), (TAS), vitamins C and E, Cu, Zn, and Fe levels. These relationships underscore the intricate connections among biomarkers in gastric cancer pathophysiology. The study underscores the intricate relationship between oxidative stress, antioxidant depletion, and micronutrient imbalances in gastric cancer. These findings offer valuable insights into the disease's pathophysiology, indicating potential diagnostic biomarkers. Further research is warranted to unravel underlying mechanisms and explore clinical applications for early gastric cancer diagnosis.

Comprehensive analysis of nutritive and toxic metal contents in canned tuna: Implications for safety and consumer health

Ca, Mg, K, Na, Fe, Cu, Mn, Zn, Ni, Cr, As, Cd, Pb and Hg levels of canned tuna fish marketed in Turkey were determined by inductively coupled plasma mass spectrometry. Ca content ranged from 80 to 2930 mg/kg, Mg from 900 to 1910 mg/kg, Na from 5930 to 12130 mg/kg, and K from 6930 to 44340 mg/kg. Fe (4.73–27.34 mg/kg), Cu (0.21 and 0.98 mg/kg), Mn (0.12–0.44 mg/kg), Zn (32–45 mg/kg), Ni (0.88–2.06 mg/kg) and Cr (0.03–0.11 mg/kg) contents of the canned foods did not exceed the provisional tolerable weekly intake limit. Cd was detected in two groups (C4=0.02 mg/kg, C18=0.15 mg/kg), while Pb was found in one group (C10=0.48 mg/kg). As content ranged from 0.27 to 1.75 mg/kg in all groups. Most of the tuna cans contained Hg between 0.046 and 0.099 mg/kg, but the highest concentration was found in sample C4 (0.81 mg/kg). Based on the increased lifetime cancer risk findings, the consumption limits of Group 4 and Group 14 should be limited to around 60 g/week (less for children). As a result of the findings that were obtained from this study careful observations should be followed up for the safer consumption of canned tuna.

Influence of habitat utilization strategies on trace element signatures in egg contents of green turtles nesting on Xisha Islands, South China Sea

Habitat utilization significantly influences the accumulation of chemical pollutants, including trace elements (TEs), in the tissues of large marine organisms. Previous research has demonstrated that sea turtles nesting in the same location may employ distinct foraging strategies. This study investigated the influence of habitat use strategies on the concentrations of 16 TEs in the eggs of green turtles (Chelonia mydas) nesting on the Xisha Islands. The analysis incorporated stable carbon (δ13C) and nitrogen (δ15N) isotopes, as well as characteristic elements. Additionally, inter-relationships between TEs were examined. The nesting female green turtles were categorized into two foraging groups based on isotopic signatures, namely oceanic (δ13C values: −21.5 to −17.0 ‰; δ15N values: 7.10 to 12.5 ‰) and neritic (δ13C values: −14.4 to −9.95 ‰ and δ15N values: 5.10 to 10.0 ‰). Different TE patterns were observed in the egg contents of these two groups. The neritic group exhibited elevated levels of V and Cu, which positively corrected with δ13C values. Conversely, the oceanic group displayed higher levels of Zn, Cd, Se, Sn, As and Hg, which positively associated with δ15N values. This distribution pattern is attributed to variations in background TE concentrations in the respective foraging habitats. Additionally, prey items and trophic levels of green turtles may contribute to the observed inter-group differences in TE concentrations (e.g. Zn, As, Se, Sn) found in their eggs, warranting further research. This study provides valuable information about habitat utilization patterns and TE distribution in green turtles nesting on the Xisha Islands. The findings enhance our understanding of TE accumulation mechanisms in turtle tissues and eggs, which is significant for the conservation of this endangered species, the green sea turtle.

Assessing the sources and spatiotemporal variability of dissolved trace elements in the upper Nakdong River based on multivariate analysis

Various sources associated with mining activities adversely affect water quality in aquatic ecosystems. This study aimed to estimate the sources of dissolved trace elements (DTEs: Al, As, B, Ba, Cd, Co, Cr, Cs, Cu, Fe, Li, Mn, Mo, Ni, Pb, Rb, Sb, U, and Zn) affecting water chemistry in the upper Nakdong River (UNR) catchment and determine the hydrological processes associated with the inflow from anthropogenic sources. Hierarchical cluster analysis (HCA) and principal component analysis (PCA) were employed to estimate main sources affecting water chemistry and its spatiotemporal variability in the four tributaries and main channel of the UNR. Water samples were classified into four groups based on their chemistry. The spatiotemporal variations of DTEs were driven by the presence of anthropogenic sources (including smelters, AMD, mining-related sources), while running toward downstream. The correlations among PCA (and HCA), Zn as smelter impact, and deuterium excess (d-excess = δ2H – 8 × δ18O) indicated that smelters had a strong influence on water chemistry in the main channel after passing through the smelter. In the dry season, d-excess < ~12 ‰ was observed with increasing Zn levels and factor score for PC2, especially samples influenced by DTEs from smelter, indicating that groundwater affected by the smelters recharged mainly by summer rainwater impacted the spatiotemporal variability of DTEs. This multivariate study suggests that the spatiotemporal variation in DTEs is associated with the complex contributions of natural and anthropogenic sources to water chemistry, which are strongly influenced by hydrological processes and seasonality.

Unlocking vitiligo’s metal code: an analytical cross-sectional study of serum levels of trace elements in vitiligo patients

Background: Vitiligo is an acquired depigmenting skin disorder often associated with social stigma and having a significant psychological impact on patients. The study aimed to determine the correlation between serum levels of copper (Cu), zinc (Zn), selenium (Se), lead (Pb), mercury (Hg), cadmium (Cd), and Cu/Pb, Cu/Hg, Cu/Cd, Se/Hg, Se/Pb, Se/Cd, Zn/Hg, Zn/Pb, and Zn/Cd ratios in vitiligo patients. Materials and methods: In this analytical cross-sectional study, we enrolled 110 vitiligo patients as cases and 110 normal adults as controls. VIDA (Vitiligo Disease Activity Score) and VASI (Vitiligo Area Severity Index) were used to assess the activity and severity of vitiligo in patients. Venous blood samples of all study participants (aged &gt;12 years) were examined for serum levels of Zn, Cu, Se, Pb, Hg, and Cd using inductively coupled plasma mass spectrometry. SPSS.21 version software was used for the analysis of the data. Results: We noted a statistically significant (p-value &lt; 0.05, student’s t-test) difference in mean serum levels of Cu, Zn, and Se (microgram/liter) between cases and controls, denoted as 1370.67 ± 484.36 versus 2887.30 ± 3744.15, 1324.50 ± 555.02 versus 1603.81 ± 551.03, 248.95 ± 120.06 versus 287.15 ± 117.37, respectively. A significantly low serum level of Se was observed in female vitiligo patients, unlike controls. Vegetarian patients had low levels of Pb (p-value &lt;0.05) in comparison to non-vegetarian patients. Significantly low Zn/Hg and Cu/Hg ratios were observed in cases compared to controls. Limitations: Our study was limited by a small sample size. Being an observational study done from a single center, chances of inclusion of patients from a limited geographical area cannot be ruled out. Conclusion: Low levels of Zn, Cu, and Se could play a crucial role in the etiopathogenesis of vitiligo, which can vary based on the gender and diet pattern of the patient.

Determination of the Iron and Zinc Contents for Teff Types in The NorthWestern Part of Ethiopia

A simple and efficient method was used to determine the levels of iron and zinc in the teff flour samples. The aim of this study was to determine the concentration levels of iron and zinc in teff samples across different locations and to compare with other reported values due to different agricultural applications. The levels of Fe and Zn in the three types of teff samples collected from the three sampling areas were determined by using Micro-plasma atomic emission spectroscopy. The iron mean concentration of white teff was highest in the Bure site followed by Bahir Dar and Debre Markos sampling sites. The level of iron in the red teff was highest in the Debre Markos site followed by Bure and Bahir Dar sampling sites respectively. Similarly, the iron content of the mixed teff was highest in Bahir Dar site followed by Debre Markos and Bure sampling sites. However, the amounts of Zn determined in the three types of teff samples collected from the three different locations were almost similar. The overall mean concentrations determined (mg/kg, air dry weight) for the teff samples collected from the Bure, Debre Markos and Bahir Dar sites were in the ranges of Fe (719) &gt; Zn (86) &gt;, Fe (728) &gt; Zn (87) and Fe (668) &gt; Zn (73), respectively. The one way ANOVA indicated the mean concentrations of the two studied metals found in the three types of teff samples within and between the sampling sites was not significant at 95% confidence level.

Correlation of serum zinc and magnesium with reduced heart rate variability in male Parkinson’s disease patients

Background: Parkinson’s disease (PD) is a neurological disorder associated with altered cardiac autonomic function. Heart rate variability (HRV) analysis is a tool to assess the cardiac autonomic status. Altered serum zinc (Zn) and magnesium (Mg) levels are observed in PD. The serum Zn and Mg alteration is associated with nerve function impairment. Objective: To evaluate the relationship between serum zinc, magnesium, and time domain measures of HRV in male patients with PD. Methods: This observational analytical cross-sectional study was conducted in 2023on 30 newly diagnosed male PD patients aged 50-60 years. In this study, 30 healthy volunteers were the control. The 30 patients were divided into different categories based on serum mineral levels. The HRV was recorded by Power Lab 8/35, AD Instruments, Australia and the time domain measures of HRV were used in data analysis. The serum Zn and Mg levels were measured by atomic absorption spectrophotometry. Independent sample ‘t’ test and Pearson’s correlation coefficient test were used for statistical analysis and p&lt;0.05 was considered statistical significance. Results: Significantly higher mean HR (Heart rate) (p&lt;0.01) and significantly lower mean RR (Normal to normal QRS complex) interval,CVRR (Coefficient variation of RR interval) (p&lt;0.01), SDRR (Standard deviation of the RR intervals), SDSD (Standard deviation of the difference between successive RR intervals), RMSSD (Square root of mean squared differences of successive RR intervals), pRR50% (Proportion of RR interval with duration &gt;50 ms) (p&lt;0.001)were observed in PD patients compared to control. In PD patients, significantly lower (p&lt;0.001) serum Zn and significantly higher (p&lt;0.01) serum Mg were observed compared to control. In addition,significant decrement was observed in SDRR, CVRR (p&lt;0.05), SDSD, RMSSD, and pRR50% (p&lt;0.01) in hypozincemic PD patients compared to normozincemic patients. On correlation analysis, significant positive correlations of serum Zn were observed with SDRR (p&lt;0.05),SDSD (p&lt;0.001), RMSSD (p&lt;0.001) and pRR50% (p&lt;0.01). Moreover,serum Mg was positively correlated with SDRR (p&lt;0.05) in PD patients. Conclusion: Hypozincemia and magnesium were directly related to reduced HRV in male PD patients. J Bangladesh Soc Physiol 2023;18(2): 63-71

Association of cardiac autonomic nerve function with serum zinc, calcium and magnesium in female hypothyroid patients

Background: Hypothyroidism is related to impaired cardiac autonomic nerve activity with altered levels of serum Zinc (Zn), Calcium (Ca) ‍and Magnesium (Mg).Altered Serum Zn,Caand Mg levels are also associated with autonomic imbalance and may raise cardiovascular risk.Heart rate variability (HRV) is an important marker for assessing cardiac autonomic nerve function(CANF). Objectives: To evaluate the association of serum Zn, Cal and Mglevels withCANF in female hypothyroid patients. Methods: This analytical cross-sectional study was conducted on 40 female hypothyroid patients aged 18-45 years. Thirty apparently healthy women were control. Serum Zn, Ca and Mg levels were estimated by autoanalyzer and CANF was assessed by time domain analysis of HRV recorded by Power Lab 8/35 AD Instruments, Australia. Statistical analysis was done by Independent sample‘t’ test, One way ANOVA followed by post-hoc Bonferroni test and Pearson’s correlation coefficient test. Results: Among time domain parameters of HRV, standard deviation of the RR intervals (SDRR), coefficient variation of RR interval (CVRR), SD rate, standard deviation of the difference between successive RR intervals (SDSD), square root of mean squared differences of successive RR intervals (RMSSD), proportion of RR interval with duration &gt;50 ms (pRR50%) were significantly lower (p&lt;0.05) in all hypothyroid patients as compared to control. On correlation analysis, serum Zn, Ca and Mg were significantly positively correlated with SDSD(p&lt;0.01, p&lt;0.001,p&lt;0.01) RMSSD(p&lt;0.01, p&lt;0.001, p&lt;0.01), pRR50%(p&lt;0.01, p&lt;0.01, p&lt;0.05)and serum Ca was also positively correlated with SDRR(p&lt;0.05) in hypothyroid patients. Conclusion:Serum ZnCa and Mg were associated with cardiac autonomic dysfunction. in female hypothyroid patients. J Bangladesh Soc Physiol 2023;18(1): 27-34

Association of multiple urinary metals/metalloids with obesity defined by body fat percentage: A cross-sectional study among Guangxi Zhuang ethnic in China

BackgroundPrevious studies confirmed a link between urinary metals/metalloids and obesity; however, the majority of these studies defined obesity using body mass index (BMI) or waist circumference (WC), and their results were not constantly consistent. Studies defining obesity based on body fat percentage (BFP) is less reported. MethodsA total of 5405 participants aged 35–74 from Guangxi Zhuang ethnic group in China were included in the analysis. Inductively coupled plasma mass spectrometry (ICP-MS) was used to detect the concentrations of 22 metals/metalloids in urine. Using a binary logistic regression model, the impact of individual metal/metalloid on the risk of BFP/obesity was analyzed, and the LASSO regression model was employed to choose metals/metalloids independently related with BFP/obesity to construct a multiple-metal models. The quantile g-computation model was used to evaluate the combined impacts of metals/metalloids on BFP/obesity. ResultsIn multiple-metal models, compared with the lowest quartile, the highest quartile of urinary concentrations of Mg, Cd, and Ti was significantly associated with a reduced risk of BFP/obesity (Mg: OR=0.66, 95 %CI: 0.51, 0.85; Cd: OR=0.63, 95 %CI: 0.49, 0.82; Ti: OR=0.73, 95 %CI: 0.57, 0.93). Conversely, the highest quartiles of urinary concentrations of Zn, V, and Sb was significantly associated with an increased risk of BFP/obesity (Zn: OR=1.75, 95 %CI: 1.39, 2.22; V: OR=1.63, 95 %CI: 1.25, 2.14; Sb: OR=1.38, 95 %CI: 1.06, 1.79). In quantile g-computation analysis, Mg, Cd, and Sn were the main contributors to negative effects, while Zn, V, and Sb were the main contributors to positive effect, although no significant relationship was observed between the multiple metal/metalloid mixtures and BFP/obesity. ConclusionsAccording to our study, urinary Mg, Cd, and Ti levels were negatively associated with BFP/obesity risk, and Zn, V, and Sb levels were positively associated with BFP/obesity risk. However, these associations need to be further verified by longitudinal studies, and the molecular mechanisms need to be further explored by animal and cell experiments.