Zero-mode Waveguides Research Articles

Zero-mode waveguide device with microlens for enhancing fluorescence signal intensity

Zero-mode waveguide device with microlens for enhancing fluorescence signal intensity

Analysis and Discovery of Functional Biomolecules Using a Combination of Fluorescence Microscopy and Micro- and Nano-devices for Single-molecule Detection

The author has developed several methodological approaches that use nanophotonic and microfluidic devices to accelerate pharmaceutical research and development. Here, the author describes two of these approaches and provides practical examples. The first is a nanophotonic approach to break the concentration limit of diffusing fluorophore-labeled molecules in single-molecule imaging. Although single-molecule imaging is highly useful in characterizing the kinetics of biomolecular interactions, it requires nanomolar concentrations of labeled molecules in solution. Zero-mode waveguides are nanophotonic structures that reduce the illumination volume by more than three orders of magnitude relative to conventional fluorescence microscopy, thereby allowing single-molecule investigations at micromolar to millimolar concentrations of fluorescent molecules i.e., under near-physiological conditions. The second approach is microfluidic microdroplet-based, allowing the discovery of novel biomolecules with the desired activities. Microfluidics allows the ultrarapid production of monodisperse microdroplets such as water-in-oil microdroplets. Each microdroplet serves as a nano/picoliter-volume test tube, which increases assay sensitivity by increasing the effective concentration of molecules and decreasing the time required to reach detection thresholds. I hope you find this review helpful in your research.

Near-Field Spot for Localized Light-Excitation of a Single Fluorescent Molecule

Zero-mode waveguides have become important tools for the detection of single molecules. There are still, however, serious challenges because large molecules need to be packed into nano-holes. To circumvent this problem, we investigate and numerically simulate a novel planar sub-wavelength 3-dimension (3D) structure, which is named as near-field spot. It enables the detection of a single molecule in highly concentrated solutions. The near-field spot can produce evanescent waves at the dielectric/water interface, which exponentially decay as they travel away from the dielectric/water interface. These evanescent waves are keys for the detection of fluorescently tagged single molecules. A numerical simulation of the proposed device shows that the performance is comparable with a zero-mode waveguide. Additional degrees-of-freedom, however, can potentially supersede its performance.

Single-molecule chemistry. Part I: monitoring oxidation of G in oligonucleotides using CY3 fluorescence

Single-molecule hybridisation of CY3 dye labelled short oligonucleotides to surface immobilised probes was investigated in zero-mode waveguide nanostructures using a modified DNA sequencer. At longer measuring times, we observed changes of the initial hybridisation fluorescence pulse pattern which we attribute to products created by chemical reactions at the nucleobases. The origin is a charge separated state created by a photoinduced electron transfer from nucleobases to the dye followed by secondary reactions with oxygen and water, respectively. The positive charge can migrate through the hybrid resulting in base modifications at distant sites. Static fluorescence spectra were recorded in order to determine the properties of CY3 stacking to different base pairs, and compared to pulse intensities. A characteristic pulse pattern change was assigned to the oxidation of G to 8-oG besides the formation of a number of secondary products that are not yet identified. Further, we present a method to visualise the degree of chemical reactions to gain an overview of ongoing processes. Our study demonstrates that CY3 is able to oxidise nucleobases in ds DNA, and also in ss overhangs. An important finding is the correlation between nucleobase oxidation potential and fluorescence quenching which explains the intensity changes observed in single molecule measurements. The analysis of fluorescence traces provides the opportunity to track complete and coherent reaction sequences enabling to follow the fate of a single molecule over a long period of time, and to observe chemical reactions in real-time. This opens up the opportunity to analyse reaction pathways, to detect new products and short-lived intermediates, and to investigate rare events due to the large number of single molecules observed in parallel.

Fabrication of Zero Mode Waveguides for High Concentration Single Molecule Microscopy.

In single molecule fluorescence enzymology, background fluorescence from labeled substrates in solution often limits fluorophore concentration to pico- to nanomolar ranges, several orders of magnitude less than many physiological ligand concentrations. Optical nanostructures called zero mode waveguides (ZMWs), which are 100-200 nm in diameter apertures fabricated in a thin conducting metal such as aluminum or gold, allow imaging of individual molecules at micromolar concentrations of fluorophores by confining visible light excitation to zeptoliter effective volumes. However, the need for expensive and specialized nanofabrication equipment has precluded the widespread use of ZMWs. Typically, nanostructures such as ZMWs are obtained by direct writing using electron beam lithography, which is sequential and slow. Here, colloidal, or nanosphere, lithography is used as an alternative strategy to create nanometer-scale masks for waveguide fabrication. This report describes the approach in detail, with practical considerations for each phase. The method allows thousands of aluminum or gold ZMWs to be made in parallel, with final waveguide diameters and depths of 100-200 nm. Only common lab equipment and a thermal evaporator for metal deposition are required. By making ZMWs more accessible to the biochemical community, this method can facilitate the study of molecular processes at cellular concentrations and rates.

How to build complexity

Summary The ribosome is the most complex molecular machine shared by all cellular life forms. Details of its evolution from an RNA world precursor are still encrypted in its molecular sequences, which are gradually yielding information beyond the reach of phylogenetic trees. Meanwhile, researchers can now study the assembly of the structure in real time, yielding further insights into the origins of complexity. Michael Gross reports.

Surface passivation of zero-mode waveguide nanostructures: benchmarking protocols and fluorescent labels

Zero mode waveguide (ZMW) nanoapertures efficiently confine the light down to the nanometer scale and overcome the diffraction limit in single molecule fluorescence analysis. However, unwanted adhesion of the fluorescent molecules on the ZMW surface can severely hamper the experiments. Therefore a proper surface passivation is required for ZMWs, but information is currently lacking on both the nature of the adhesion phenomenon and the optimization of the different passivation protocols. Here we monitor the influence of the fluorescent dye (Alexa Fluor 546 and 647, Atto 550 and 647N) on the non-specific adhesion of double stranded DNA molecule. We show that the nonspecific adhesion of DNA double strands onto the ZMW surface is directly mediated by the organic fluorescent dye being used, as Atto 550 and Atto 647N show a pronounced tendency to adhere to the ZMW while the Alexa Fluor 546 and 647 are remarkably free of this effect. Despite the small size of the fluorescent label, the surface charge and hydrophobicity of the dye appear to play a key role in promoting the DNA affinity for the ZMW surface. Next, different surface passivation methods (bovine serum albumin BSA, polyethylene glycol PEG, polyvinylphosphonic acid PVPA) are quantitatively benchmarked by fluorescence correlation spectroscopy to determine the most efficient approaches to prevent the adsorption of Atto 647N labeled DNA. Protocols using PVPA and PEG-silane of 1000 Da molar mass are found to drastically avoid the non-specific adsorption into ZMWs. Optimizing both the choice of the fluorescent dye and the surface passivation protocol are highly significant to expand the use of ZMWs for single molecule fluorescence applications.

Near-UV luminescence tomography with an aperture-free meta super oscillatory lens for single molecule detection.

Medical physics offers super oscillatory lenses (SOL) to attain subwavelength focusing for efficient image resolution in the detection of a single molecule. In this paper, we propose a negative-indexed permeability-controlled meta SOL, which restores the light concentration via exciting surface plasmon resonance and enhances luminescence at our region of interest, i.e., fluid sample (${S_L}$SL). The meta SOL is aperture-free in comparison with other techniques (zero-mode waveguides and nano antennas) and hence avoids the constraints, which are posed by nano apertures, to insert a small volume of $ S_L $SL into these nano apertures for detection purposes. The meta SOL is a unique combination of gold split rings mounted on silicon dioxide (${{\rm SiO}_2}$SiO2) substrate and operational in the near-ultraviolet (UV) region. We utilized the phenomena of negative index of refraction, and our simulated trails exploit the magnetic (${\mu _r}$μr) response of the meta SOL by analyzing its transmission spectra in the frequency range from 3.53 to 3.57 Peta Hz. We observe the methodical response of the meta SOL with its ample potential to surpass the resolution at a working wavelength of $\lambda ={84.173}\;{\rm nm}$λ=84.173nm, which enhances luminescence by restoring the evanescent UV magnetic field (${B_{\rm UV}}$BUV) at ${S_L}$SL. This technique will offer a new and easy approach to uplift the efficiency of super oscillatory lenses in the near-UV regime to benefit single molecule detection techniques and thus the novelty.

Long-Range Single-Molecule Förster Resonance Energy Transfer between Alexa Dyes in Zero-Mode Waveguides.

Zero-mode waveguide (ZMW) nano-apertures milled in metal films were proposed to improve the Förster resonance energy transfer (FRET) efficiency and enable single-molecule FRET detection beyond the 10 nm barrier, overcoming the restrictions of diffraction-limited detection in a homogeneous medium. However, the earlier ZMW demonstrations were limited to the Atto 550–Atto 647N fluorophore pair, asking the question whether the FRET enhancement observation was an artifact related to this specific set of fluorescent dyes. Here, we use Alexa Fluor 546 and Alexa Fluor 647 to investigate single-molecule FRET at large donor–acceptor separations exceeding 10 nm inside ZMWs. These Alexa fluorescent dyes feature a markedly different chemical structure, surface charge, and hydrophobicity as compared to their Atto counterparts. Our single molecule data on Alexa 546–Alexa 647 demonstrate enhanced FRET efficiencies at large separations exceeding 10 nm, extending the spatial range available for FRET and confirming the earlier conclusions. By showing that the FRET enhancement inside a ZMW does not depend on the set of fluorescent dyes, this report is an important step to establish the relevance of ZMWs to extend the sensitivity and detection range of FRET, while preserving its ability to work on regular fluorescent dye pairs.

Single-Molecule Manipulation in Zero-Mode Waveguides.

The mechanobiology of receptor-ligand interactions and force-induced enzymatic turnover can be revealed by simultaneous measurements of force response and fluorescence. Investigations at physiologically relevant high labeled substrate concentrations require total internal reflection fluorescence microscopy or zero mode waveguides (ZMWs), which are difficult to combine with atomic force microscopy (AFM). A fully automatized workflow is established to manipulate single molecules inside ZMWs autonomously with noninvasive cantilever tip localization. A protein model system comprising a receptor-ligand pair of streptavidin blocked with a biotin-tagged ligand is introduced. The ligand is pulled out of streptavidin by an AFM cantilever leaving the receptor vacant for reoccupation by freely diffusing fluorescently labeled biotin, which can be detected in single-molecule fluorescence concurrently to study rebinding rates. This work illustrates the potential of the seamless fusion of these two powerful single-molecule techniques.

Electrically Actuatable Zero-Mode Waveguides for High-Throughput Sequencing

Single-molecule real-time (SMRT) sequencing technology developed by Pacific Biosciences is a robust DNA sequencing method in which DNA strand replication by an individual DNA polymerase is imaged using fluorescently labeled nucleotides. SMRT sequencing, however, suffers from inefficient loading of DNA molecules into nano-wells called zero-mode waveguides (ZMWs). In addition, ZMWs are biased towards the diffusion-based entry of short DNA templates. To overcome these challenges, our lab introduced two powerful tools, i.e., nanopore ZMWs (NZMWs) and porous ZMWs (PZMWs), to electrokinetically enhance the capture of DNA fragments inside the ZMWs.

Single Entity Electrochemistry in Nanopore Electrode Arrays: Ion Transport Meets Electron Transfer in Confined Geometries.

Electrochemical measurements conducted in confined volumes provide a powerful and direct means to address scientific questions at the nexus of nanoscience, biotechnology, and chemical analysis. How are electron transfer and ion transport coupled in confined volumes and how does understanding them require moving beyond macroscopic theories? Also, how do these coupled processes impact electrochemical detection and processing? We address these questions by studying a special type of confined-volume architecture, the nanopore electrode array, or NEA, which is designed to be commensurate in size with physical scaling lengths, such as the Debye length, a concordance that offers performance characteristics not available in larger scale structures.The experiments described here depend critically on carefully constructed nanoscale architectures that can usefully control molecular transport and electrochemical reactivity. We begin by considering the experimental constraints that guide the design and fabrication of zero-dimensional nanopore arrays with multiple embedded electrodes. These zero-dimensional structures are nearly ideal for exploring how permselectivity and unscreened ion migration can be combined to amplify signals and improve selectivity by enabling highly efficient redox cycling. Our studies also highlight the benefits of arrays, in that molecules escaping from a single nanopore are efficiently captured by neighboring pores and returned to the population of active redox species being measured, benefits that arise from coupling ion accumulation and migration. These tools for manipulating redox species are well-positioned to explore single molecule and single particle electron transfer events through spectroelectrochemistry, studies which are enabled by the electrochemical zero-mode waveguide (ZMW), a special hybrid nanophotonic/nanoelectronic architecture in which the lower ring electrode of an NEA nanopore functions both as a working electrode to initiate electron transfer reactions and as the optical cladding layer of a ZMW. While the work described here is largely exploratory and fundamental, we believe that the development of NEAs will enable important applications that emerge directly from the unique coupled transport and electron-transfer capabilities of NEAs, including in situ molecular separation and detection with external stimuli, redox-based electrochemical rectification in individually encapsulated nanopores, and coupled sorters and analyzers for nanoparticles.

Mixed metal zero-mode guides (ZMWs) for tunable fluorescence enhancement.

Zero-mode waveguides (ZMWs) are capable of modifying fluorescence emission through interactions with surface plasmon modes leading to either plasmon-enhanced fluorescence or quenching. Enhancement requires spectral overlap of the plasmon modes with the absorption or emission of the fluorophore. Thus, enhancement is limited to fluorophores in resonance with metals (e.g. Al, Au, Ag) used for ZMWs. The ability to tune interactions to match a wider range of fluorophores across the visible spectra would significantly extend the utility of ZMWs. We fabricated ZMWs composed of aluminum and gold individually and also in mixtures of three different ratios, (Al : Au; 75 : 25, 50 : 50, 25 : 75). We characterized the effect of mixed-metal ZMWs on single-molecule emission for a range fluorophores across the visible spectrum. Mixed metal ZMWs exhibited a shift in the spectral range where they exhibited the maximum fluorescence enhancement allowing us to match the emission of fluorophores that were nonresonant with single metal ZMWs. We also compared the effect of mixed-metal ZMWs on the photophysical properties of fluorescent molecules due to metal–molecule interactions. We quantified changes in fluorescence lifetimes and photostability that were dependent on the ratio of Au and Al. Tuning the enhancement properties of ZMWs by changing the ratio of Au and Al allowed us to match the fluorescence of fluorophores that emit in different regions of the visible spectrum.

Zero-mode waveguides can be made better: fluorescence enhancement with rectangular aluminum nanoapertures from the visible to the deep ultraviolet.

Nanoapertures milled in metallic films called zero-mode waveguides (ZMWs) overcome the limitations of classical confocal microscopes by enabling single molecule analysis at micromolar concentrations with improved fluorescence brightness. While the ZMWs have found many applications in single molecule fluorescence studies, their shape has been mainly limited to be circular. Owing to the large parameter space to explore and the lack of guidelines, earlier attempts using more elaborate shapes have led to unclear conclusions whether or not the performance was improved as compared to a circular ZMW. Here, we comparatively analyze the performance of rectangular-shaped nanoapertures milled in aluminum to enhance the fluorescence emission rate of single molecules from the near infrared to the deep ultraviolet. Our new design is based on rational principles taking maximum advantage of the laser linear polarization. While the long edge of the nanorectangle is set to meet the cut-off size for the propagation of light into the nanoaperture, the short edge is reduced to 30 nm to accelerate the photodynamics while maintaining bright fluorescence rates. Our results show that both in the red and in the ultraviolet, the nanorectangles provide 50% brighter photon count rates as compared to the best performing circular ZMWs and achieve fluorescence lifetimes shorter than 300 ps. These findings can be readily used to improve the performance of ZMWs, especially for fast biomolecular dynamics, bright single-photon sources, and ultraviolet plasmonics.

Acid-base chemistry at the single ion limit.

We present the results of acid–base experiments performed at the single ion (H+ or OH−) limit in ∼6 aL volume nanopores incorporating electrochemical zero-mode waveguides (E-ZMWs). At pH 3 each E-ZMW nanopore contains ca. 3600H+ ions, and application of a negative electrochemical potential to the gold working electrode/optical cladding layer reduces H+ to H2, thereby depleting H+ and increasing the local pH within the nanopore. The change in pH was quantified by tracking the intensity of fluorescein, a pH-responsive fluorophore whose intensity increases with pH. This behavior was translated to the single ion limit by changing the initial pH of the electrolyte solution to pH 6, at which the average pore occupancy 〈n〉pore ∼3.6H+/nanopore. Application of an electrochemical potential sufficiently negative to change the local pH to pH 7 reduces the proton nanopore occupancy to 〈n〉pore ∼0.36H+/nanopore, demonstrating that the approach is sensitive to single H+ manipulations, as evidenced by clear potential-dependent changes in fluorescein emission intensity. In addition, at high overpotential, the observed fluorescence intensity exceeded the value predicted from the fluorescence intensity-pH calibration, an observation attributed to the nucleation of H2 nanobubbles as confirmed both by calculations and the behavior of non-pH responsive Alexa 488 fluorophore. Apart from enhancing fundamental understanding, the approach described here opens the door to applications requiring ultrasensitive ion sensing, based on the optical detection of H+ population at the single ion limit.

Nanoaperture fabrication via colloidal lithography for single molecule fluorescence analysis.

In single molecule fluorescence studies, background emission from labeled substrates often restricts their concentrations to non-physiological nanomolar values. One approach to address this challenge is the use of zero-mode waveguides (ZMWs), nanoscale holes in a thin metal film that physically and optically confine the observation volume allowing much higher concentrations of fluorescent substrates. Standard fabrication of ZMWs utilizes slow and costly E-beam nano-lithography. Herein, ZMWs are made using a self-assembled mask of polystyrene microspheres, enabling fabrication of thousands of ZMWs in parallel without sophisticated equipment. Polystyrene 1 μm dia. microbeads self-assemble on a glass slide into a hexagonal array, forming a mask for the deposition of metallic posts in the inter-bead interstices. The width of those interstices (and subsequent posts) is adjusted within 100–300 nm by partially fusing the beads at the polystyrene glass transition temperature. The beads are dissolved in toluene, aluminum or gold cladding is deposited around the posts, and those are dissolved, leaving behind an array ZMWs. Parameter optimization and the performance of the ZMWs are presented. By using colloidal self-assembly, typical laboratories can make use of sub-wavelength ZMW technology avoiding the availability and expense of sophisticated clean-room environments and equipment.

Deep Ultraviolet Plasmonic Enhancement of Single Protein Autofluorescence in Zero-Mode Waveguides.

Single molecule detection provides detailed information about molecular structures and functions but it generally requires the presence of a fluorescent marker which can interfere with the activity of the target molecule or complicate the sample production. Detecting a single protein with its natural UV autofluorescence is an attractive approach to avoid all the issues related to fluorescence labeling. However, the UV autofluorescence signal from a single protein is generally extremely weak. Here, we use aluminum plasmonics to enhance the tryptophan autofluorescence emission of single proteins in the UV range. Zero-mode waveguide nanoapertures enable the observation of the UV fluorescence of single label-free β-galactosidase proteins with increased brightness, microsecond transit times, and operation at micromolar concentrations. We demonstrate quantitative measurements of the local concentration, diffusion coefficient, and hydrodynamic radius of the label-free protein over a broad range of zero-mode waveguide diameters. Although the plasmonic fluorescence enhancement has generated a tremendous interest in the visible and near-infrared parts of the spectrum, this work pushes further the limits of plasmonic-enhanced single molecule detection into the UV range and constitutes a major step forward in our ability to interrogate single proteins in their native state at physiological concentrations.

Extending Single-Molecule Förster Resonance Energy Transfer (FRET) Range beyond 10 Nanometers in Zero-Mode Waveguides.

Single-molecule Förster resonance energy transfer (smFRET) is widely used to monitor conformations and interaction dynamics at the molecular level. However, conventional smFRET measurements are ineffective at donor-acceptor distances exceeding 10 nm, impeding the studies on biomolecules of larger size. Here, we show that zero-mode waveguide (ZMW) apertures can be used to overcome the 10 nm barrier in smFRET. Using an optimized ZMW structure, we demonstrate smFRET between standard commercial fluorophores up to 13.6 nm distance with a significantly improved FRET efficiency. To further break into the classical FRET range limit, ZMWs are combined with molecular constructs featuring multiple acceptor dyes to achieve high FRET efficiencies together with high fluorescence count rates. As we discuss general guidelines for quantitative smFRET measurements inside ZMWs, the technique can be readily applied for monitoring conformations and interactions on large molecular complexes with enhanced brightness.

Fluorescence enhancement in an over-etched gold zero-mode waveguide.

The fluorescence enhancement in an over-etched gold zero-mode waveguide (ZMW) was investigated through both numerical simulation and experiments. Using Cy3 and Cy5 as the fluorescent probes, the simulation showed that the undercut not only enhances the fluorescence signals of both fluorophores, but also greatly improves the radial uniformity of the excitation fields in the ZMW. Furthermore, using a focused-ion-beam tool, we fabricated Au-ZMW arrays with different radius and undercut. The fluorescence enhancement per molecule and the effective excitation volume of the Au-ZMW were then measured as functions of its radial size and over-etching depth by using fluorescence correlation spectroscopy. It was found that the undercut can significantly enhance the fluorescence signal per molecule in the ZMW, but it also slightly increased the excitation volume. Decreasing the radial size of the ZMW can efficiently reduce the excitation volume and also further enhance the fluorescence per molecule. These results together indicate that combining the undercut and reduction of radius of the ZMW can serve as a simple and effective way to essentially improve the performance of an Au-ZMW for single molecule fluorescence detection.

Nanopore-Templated Silver Nanoparticle Arrays Photopolymerized in Zero-Mode Waveguides.

In situ fabrication of nanostructures within a solid-polymer electrolyte confined to subwavelength-diameter nanoapertures is a promising approach for producing nanomaterials for nanophotonic and chemical sensing applications. The solid-polymer electrolyte can be patterned by lithographic photopolymerization of poly(ethylene glycol) diacrylate (PEGDA)-based silver cation (Ag+)-containing polyelectrolyte. Here, we present a new method for fabricating nanopore-templated Ag nanoparticle (AgNP) arrays by in situ photopolymerization using a zero-mode waveguide (ZMW) array to simultaneously template embedded AgNPs and control the spatial distribution of the optical field used for photopolymerization. The approach starts with an array of nanopores fabricated by sequential layer-by-layer deposition and focused ion beam milling. These structures have an optically transparent bottom, allowing access of the optical radiation to the attoliter-volume ZMW region to photopolymerize a PEGDA monomer solution containing AgNPs and Ag+. The electric field intensity distribution is calculated for various ZMW optical cladding layer thicknesses using finite-element simulations, closely following the light-blocking efficiency of the optical cladding layer. The fidelity of the polyelectrolyte nanopillar pattern was optimized with respect to experimental conditions, including the presence or absence of Ag+ and AgNPs and the concentrations of PEGDA and Ag+. The self-templated approach for photopatterning high-resolution photolabile polyelectrolyte nanostructures directly within a ZMW array could lead to a new class of metamaterials formed by embedding metal nanoparticles within a dielectric in a well-defined spatial array.