Z-type Ligands Research Articles

Bismuth as a Z-Type Ligand: an Unsupported Pt-Bi Donor-Acceptor Interaction and its Umpolung by Reaction with H2.

Establishing unprecedented types of bonding interactions is one of the fundamental challenges in synthetic chemistry, paving the way to new (electronic) structures, physicochemical properties, and reactivity. In this context, unsupported element-element interactions are particularly noteworthy since they offer pristine scientific information about the newly identified structural motif. Here we report the synthesis, isolation, and full characterization of the heterobimetallic Bi/Pt compound [Pt(PCy3)2(BiMe2)(SbF6)] (1), bearing the first unsupported transition metal→bismuth donor/acceptor interaction as its key structural motif. 1 is surprisingly robust, its electronic spectra are interpreted in a fully relativistic approach, and it reveals an unprecedented reactivity towards H2.

Coloring Tetrahedral Semiconductors: Synthesis and Photoluminescence Enhancement of Ternary II-III2-VI4 Colloidal Nanocrystals.

Ternary tetrahedral II-III2-VI4 semiconductors, where II is Zn or Cd, III In or Ga, and VI S, Se, or Te, are of interest in UV radiation detectors in medicine and space physics as well as CO2 photoreduction under visible light. We synthesize colloidal II-III2-VI4 semiconductor nanocrystals from readily available precursors and ascertain their ternary nature by structural and spectroscopic methods, including 77Se solid-state NMR spectroscopy. The pyramidally shaped nanocrystals range between 2 and 12 nm and exhibit optical gaps of 2-3.9 eV. In the presence of excess anions on the particle surface, treatment with Lewis acidic, Z-type ligands results in better passivation and enhanced photoluminescence. Electronic structure calculations reveal the most stable, lowest energy polymorphs and coloring patterns. This work will pave the way toward more environmentally friendly, ternary semiconductors for optoelectronics and electrocatalysis.

Synthesis of Chiral L2/Z-Type Ligands Featuring a Bisoxazoline Framework and Their Application to Palladium-Catalyzed Asymmetric Allylic Alkylation

AbstractChiral L2/Z*-type ligands featuring a bisoxazoline framework have been successfully synthesized and applied in asymmetric allylic alkylation. These ligands, designed based on an oxazoline skeleton and derived from chiral amino acid derivatives, incorporate antimony and bismuth as Z-type ligands. Ligands with bulky, electron-withdrawing groups on antimony and bismuth showed enhanced catalytic performance. This research highlights the potential of these novel chiral L2/Z*-type ligands to improve asymmetric catalysis.

Reduction reactions at the interface between CdS quantum dot and Z-type ligands driven by electron injection in the electroluminescent processes.

The efficient and stable electroluminescence of quantum dots (QDs) is of great importance in their applications in new display technologies. The short service life of blue QDs, however, hinders their development and commercialization. Different mechanisms have been proposed for the destabilization of QDs in electroluminescent processes. Based on real-time time-dependent density functional theory studies on the QD models covered by Z-type ligands (XAc2, X = Cd, Zn, Mg), the structural evolution is simulated to reveal the mechanism of the reduction reactions induced by electron injection. Our simulations reproduce the experimental observations that the reduction reactions occur at the QD-ligand interface, and the reduced Cd atom is almost in a zero valence state. However, different sites are predicted for the reactions in which the surface metal atom of the QD instead of the metal atom in the ligands is reduced. As a result, one of the arms of the chelate ligand leaves the QD, which tends to cause damage to its electroluminescent performance. Our findings contribute to a mechanistic understanding of the reduction reactions that occurred at the QD-ligand interface.

Z-Type Ligand Enables Efficient and Stable Deep-Blue Perovskite Light-Emitting Diodes.

During the synthesis of deep-blue perovskite quantum dots (PQDs), they generally emerge as a two-dimensional byproduct with poor yield and low photoluminescence quantum yield (PLQY) due to amine ligand enrichment-induced abundant surface defects. Herein, we provide a colloidal synthesis method to prepare deep-blue CsPbBr3 PQDs in a green nontoxic solvent via strategic Z-type ligand engineering. Z-type ligands of zinc octanoate enable the formation of robust coordination bonds with surface bromide ions of PQDs, maintaining acid-base equilibrium and reducing excess amine enrichment on the PQDs surface. Consequently, homogeneous and monodispersed PQDs with improved PLQY of 73% are successfully synthesized, achieving efficient deep-blue LEDs with a peak EQE of 5.46%, a maximum luminance of 847.6 cd/m2, and an operational half-lifetime of 14 min. The devices exhibit color coordinates of (0.137, 0.049), closely approximating the Rec. 2020 blue standard. Our work offers a potentially eco-friendly and viable route for realizing high-performance LEDs in the deep-blue region.

Metal-Dictated Reactivity of Z-Type Ligands to Passivate Surface Defects on CdSe Nanocrystals.

Accessing semiconductor nanocrystals free from surface defects is an outstanding challenge in the design of materials with targeted properties. Despite the established importance of Z-type ligand surface passivation to eliminate defects, the optical and electronic properties of nanocrystals vary depending on the nanocrystal composition and Z-type ligand identity. In this work, a series of Cd-, Zn-, and Pb-based non-native Z-type ligands with the formula MX2 (X = undecylenate or chloride) were employed to elucidate Z-type ligand characteristics that result in surface passivation of undercoordinated surface ions to eliminate trap states from CdSe nanocrystals. First, CdSe nanocrystals were reacted with N,N,N',N'-tetramethylethylene-1,2-diamine (TMEDA) to remove native Cd(oleate)2 Z-type ligands from the surface, resulting in undercoordinated surface chalcogen ions. After subsequent reaction with M(UDA)2, ligands bound to the surface were quantified by NMR spectroscopy, and in parallel, the impact of Z-type ligands on the nanocrystal optical properties was monitored using photoluminescence spectroscopy. We find that Cd- and Zn-based Z-type ligands exhibit similar reactivity with the nanocrystal surface via NMR spectroscopy, yet Cd(UDA)2 passivation results in an 800% PL increase while Zn(UDA)2 passivation yields a 13% increase in photoluminescence intensity. Nanocrystals reacted with Pb-based Z-type ligands have lower surface coverage, as quantified by NMR spectroscopy, and lead to only a marginal increase of nanocrystal photoluminescence intensity (60%). These data indicate that the metal identity of the Z-type ligand has a profound impact on the reactivity and resulting electronic structure of the postsynthetically modified nanocrystal. This work provides a framework for achieving defect-free CdSe nanocrystals.

Surface Reconstructions in II-VI Quantum Dots.

Although density functional theory (DFT) calculations have been crucial in our understanding of colloidal quantum dots (QDs), simulations are commonly carried out on QD models that are significantly smaller than those generally found experimentally. While smaller models allow for efficient study of local surface configurations, increasing the size of the QD model will increase the size or number of facets, which can in turn influence the energetics and characteristics of trap formation. Moreover, core-shell structures can only be studied with QD models that are large enough to accommodate the different layers with the correct thickness. Here, we use DFT calculations to study the electronic properties of QDs as a function of size, up to a diameter of ∼4.5 nm. We show that increasing the size of QD models traditionally used in DFT studies leads to a disappearance of the band gap and localization of the HOMO and LUMO levels on facet-specific regions of the QD surface. We attribute this to the lateral coupling of surface orbitals and the formation of surface bands. The introduction of surface vacancies and their a posteriori refilling with Z-type ligands leads to surface reconstructions that widen the band gap and delocalize both the HOMO and LUMO. These results show that the surface geometry of the facets plays a pivotal role in defining the electronic properties of the QD.

Neutral and Anionic Square Planar Palladium(0) Complexes Stabilized by a Silicon Z-Type Ligand.

Anionic [Pd(0)-X]- ate complex were proposed as key intermediates in Pd-catalyzed cross-coupling for decades, but their isolation remained elusive. Herein, a chelating Lewis acidic bis(amidophenolato)silane is introduced as a strong Z-type ligand which enables the characterization of the first anionic [Pd(0)-X]- ate complex. Intriguingly, these compounds and the neutral L-Pd(0) analogs exhibit a square planar coordination that is highly unusual for a d10 metal. Theoretical methods scrutinize the interaction between the Lewis acidic Si(IV) center and the late transition metal, while reactivity studies shed light on the potential role of anionic additives in oxidative addition reactions.

Reactivity of ruthenium complexes towards organogallium reagents: Gallium as a Z-type ligand or as a gallate counterion

The reaction of RuHCl(PPh3)3 with GaMe3 gives rise to the arene complex [(η6-C6H6)Ru(PPh3)(PPh2-o-C6H4-GaClMe], 1, with the Ga atom making part of an in situ generated ambiphilic phosphinogallyl ligand in a five-membered ruthenagallacycle ring with a tetracoordinate gallium. In the presence of excess GaMe3, 1 forms complex [(η6-C6H6)Ru(PPh3)(PPh2-o-C6H4-GaMe][GaMe3Cl], 2 also bearing a phosphinogallyl ligand. Crystals suitable for single-crystal X-ray diffraction were obtained of complex 2′, [(η6-C6H6)Ru(PPh3)(PPh2-o-C6H4-GaMe][GaMe2Cl2], showing an ion pair with two Ga atoms in different coordination environments: the first with a coordination number of three makes part of a five-membered ruthenagallacyle ring, while the second Ga atom is a gallate anion. In both complexes 1 and 2, the Ga atom binds to Ru as a σ-acceptor Z-type ligand. DFT calculations are in good agreement with the experimental single crystal X-ray diffraction data and provide Ru-Ga Wiberg bond indexes of 0.38 and 0.50, for 1 and 2 respectively. In contrast, treatment of RuHCl(PPh3)3 with GaMeCl2 and of RuCl2(PPh3)3 with GaMe3 gives rise to gallate species [(η6-C6H6)Ru(PPh3)2H][GaMeCl3], 3, and [(η6-C6H6)Ru(PPh3)2Me][GaMe2Cl2], 4, respectively.

Synthesis and Some Coordination Chemistry of Phosphane-Difunctionalized Bis(amidinato)-Heavier Tetrylenes: A Previously Unknown Class of PEP Tetrylenes (E = Ge and Sn).

The bis(amidinato)-heavier tetrylenes E(bzamP)2 (E = Ge (2a) and Sn (2b); bzamP = N-isopropyl-N'-(diphenylphosphanylethyl)benzamidinate), which are equipped with one heavier tetrylene (germylene or stannylene) and two phosphane fragments (one on each amidinate moiety) as coordinable groups, have been synthesized from the benzamidinum salt [H2bzamP]Cl and GeCl2(dioxane) or SnCl2 in 2:1 mol ratio. A preliminary inspection of their coordination chemistry has shown that their amidinate group can also be involved in the bonding with the metal atoms as tridentate ENP and tetradentate PENP' coordination modes have been observed for the ECl(bzamP)2 ligand of [Ir{κ3E,N,P-ECl(bzamP)2}(cod)] (E = Ge (3a) and Sn (3b); cod = η4-1,5-cyclooctadiene) and the E(bzamP)2 ligand of [Ni{κ4E,N,P,P'-E(bzamP)2}] (E = Ge (4a) and Sn (4b)), which are products of reactions of 2a and 2b with [IrCl(cod)]2 (1:0.5 mol ratio) and [Ni(cod)2] (1:1 mol ratio), respectively. These products contain a 5-membered NCNEM ring that results from the insertion of the metal M atom into an E-N bond of 2a and 2b. Additionally, while iridium(I) complexes 3a and 3b are chloridotetryl derivatives (insertion of the tetrylene E atom into the Ir-Cl bond has also occurred) that have an uncoordinated phosphane group, nickel(0) complexes 4a and 4b contain a tetrylene fragment that, maintaining the lone pair, behaves as a σ-acceptor (Z-type) ligand.

T-shaped Ni0 Systems Featuring Cationic Tetrylenes: Direct Observation of L/Z-type Ligand Duality, and Alkene Hydrogenation Catalysis.

We report a facile synthetic method for accessing rare T-shaped Ni0 species, stabilised by low-coordinate cationic germylene and stannylene ligands which behave as Z-type ligands toward Ni0 . An in-depth computational analysis indicates significant Nid →Ep donation (E=Ge, Sn), with essentially no E→Ni donation. The tetrylene ligand's Lewis acidity can be modulated in situ through the addition of a donor ligand, which selectively binds at the Lewis acidic tetrylene site. This switches this binding centre from a Z-type to a classical L-type ligand, with a concomitant geometry switch at Ni0 from T-shaped to trigonal planar. Exploring the effects of this geometry switch in catalysis, isolated T-shaped complexes 3 a-c and 4 a-c are capable of the hydrogenation of alkenes under mild conditions, whilst the closely related trigonal planar and tetrahedral Ni0 complexes 5, D, and E, which feature L-type chloro- or cationic-tetrylene ligands, are inactive under these conditions. Further, addition of small amounts of N-bases to the catalytic systems involving T-shaped complexes significantly reduces turnover rates, giving evidence for the in situ modulation of ligand electronics for catalytic switching.

Catalytic stannane–fluorine activation triggered by Pd → Sn–F interaction

The chemistry of σ-acceptor (Z-type) ligands has been attracting significant interest for some time, and the geometric and electronic structures featuring Z-type ligands have provided a profound understanding of their distinctive chemical bonds, chemical properties, and reactivities. We herein report that the coordination of Lewis acidic fluorostannane as Z-type ligands enhances their nucleophilicities, opening new opportunities for the development of Pd-catalyzed cross-coupling reaction of fluorostannanes as coupling reagents. Thanks to phosphine chelation, fluorostannane serves as a Lewis acid (Z-type ligand) toward Pd atom and withdraws electron density from the Pd center via the σ*(Sn–F) orbital. Thus, the strong and polar Sn–F bond is efficiently weakened via σ-donation from the Pd center. Accordingly, the F atom in fluorostannane was readily abstracted by even moderate Lewis acidic boranes, leading to the conversion of Z-type stannane to X-stannyl complexes. This key conversion enabled the catalytic arylation of fluorostannane for the first time.

Characterizing the Semiconductor Nanocrystal Surface through Chemical Reactivity.

ConspectusMany desirable and undesirable properties of semiconductor nanocrystals (NCs) can be traced to the NC surface due to the large surface-to-volume ratio. Therefore, precise control of the NC surface is imperative to achieve NCs with the desired qualities. Ligand-specific reactivity and surface heterogeneity make it difficult to accurately control and tune the NC surface. Without a molecular-level appreciation of the NC surface chemistry, modulating the NC surface is impossible and the risk of introducing deleterious surface defects is imminent. To gain a more comprehensive understanding of the surface reactivity, we have utilized a variety of spectroscopic techniques and analytical methods in concert.This Account describes our use of robust characterization techniques and ligand exchange reactions in effort to establish a molecular-level understanding of NC surface reactivity. The utility of NCs in target applications such as catalysis and charge transfer hangs on precise tunability of NC ligands. Modulating the NC surface requires the necessary tools to monitor chemical reactions. One commonly utilized analytical method to achieve targeted surface compositions is 1H nuclear magnetic resonance (NMR) spectroscopy. Here we describe our use of 1H NMR spectroscopy to monitor chemical reactions at CdSe and PbS NC surfaces to identify ligand specific reactivity. However, seemingly straightforward ligand exchange reactions can vary widely depending on the NC materials and anchoring group. Some non-native X-type ligands will irreversibly displace native ligands. Other ligands exist in equilibrium with native ligands. Depending on the application, it is important to understand the nature of exchange reactions. This level of understanding can be obtained by extracting exchange ratios, exchange equilibrium, and reaction mechanism information from 1H NMR spectroscopy to establish precise NC reactivity.Reactivity that occurs through multiple, parallel ligand exchange mechanisms can involve both the liberation of metal-based Z-type ligands in addition to reactivity of X-type ligands. In these reactions, 1H NMR spectroscopy fails to discern between an X-type oleate or a Z-type Pb(oleate)2 because only the alkene resonance of the organic constituent is probed by this method. Multiple, parallel reaction pathways occur when thiol ligands are introduced to oleate-capped PbS NCs. This necessitated the use of synergistic characterization methods including 1H NMR spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, and inductively coupled plasma mass spectrometry (ICP-MS) to characterize both surface-bound and liberated ligands.Similar analytical methods have been employed to probe the NC topology, which is an important, but often overlooked, component to NC reactivity given the facet-specific reactivity of PbS NCs. Through the tandem use of NMR spectroscopy and ICP-MS, we have monitored the liberation of Pb(oleate)2 as an L-type ligand is titrated to the NC to determine the quantity and equilibrium of Z-type ligands. By studying a variety of NC sizes, we correlated the number of liberated ligands with the size-dependent topology of PbS NCs.Lastly, we incorporate redox-active chemical probes into our toolbox to study NC surface defects. We describe how the site-specific reactivity and relative energetics of redox-active surface-based defects are elucidated using redox probes and show that this reactivity is highly dependent on the surface composition. This Account is designed to encourage readers to consider the necessary characterization techniques needed establish a molecular-level understanding of NC surfaces in their own work.

Sequential Co-Passivation in InAs Colloidal Quantum Dot Solids Enables Efficient Near-Infrared Photodetectors.

III-V colloidal quantum dots (CQDs) are promising materials for optoelectronic applications, for they avoid heavy metals while achieving absorption spanning the visible to the infrared (IR). However, the covalent nature of III-V CQDs requires the development of new passivation strategies to fabricate conductive CQD solids for optoelectronics: this work shows herein that ligand exchanges, previously developed in II-VI and IV-VI quantum dots and employing a single ligand, do not fully passivate CQDs, and that this curtails device efficiency. Guided by density functional theory (DFT) simulations, this work develops a co-passivation strategy to fabricate indium arsenide CQD photodetectors, an approach that employs the combination of X-type methyl ammonium acetate (MaAc) and Z-type ligands InBr3 . This approach maintains charge carrier mobility and improves passivation, seen in a 25% decrease in Stokes shift, a fourfold reduction in the rate of first-exciton absorption linewidth broadening over time-under-stress, and leads to a doubling in photoluminescence (PL) lifetime. The resulting devices show 37% external quantum efficiency (EQE) at 950nm, the highest value reported for InAs CQD photodetectors.

Ligand and solvent effects on the absorption spectra of CdS magic-sized clusters.

The absorption spectra of congenetic wurtzite (WZ) and zincblende (ZB) CdS magic-sized clusters are investigated. We demonstrate that the exciton peak positions can be tuned by up to 500meV by varying the strong coupling between X-type ligands and the semiconductor cores, while the addition of L-type ligands primarily affects cluster midgap states. When Z-type ligands are displaced by L-type ligands, red shifts in the absorption spectra are observed, despite the fact there is a small decrease in cluster size. Density functional theory calculations are used to explain these findings and they reveal the importance of Cd and S dangling bonds on the midgap states during the Z- to L-type ligand exchange process. Overall, ZB CdS clusters show higher chemical stability than WZ clusters but their optical properties exhibit greater sensitivity to the solvent. Conversely, WZ CdS clusters are not stable in a Lewis base-rich environment, resulting in various changes in their spectra. Our findings enable researchers to select capping ligands that modulate the optical properties of semiconductor clusters while maintaining precise control over their solvent interactions.

Square-Planar Anionic Pt0 Complexes.

A T-shaped Pt0 complex with a diphosphine-borane (DPB) ligand was prepared. The Pt→B interaction enhances the electrophilicity of the metal and triggers the addition of Lewis bases to give the corresponding tetracoordinate complexes. For the first time, anionic Pt0 complexes are isolated and structurally authenticated. X-ray diffraction analyses show the anionic complexes [(DPB)PtX]- (X=CN, Cl, Br, I) to be square-planar. The d10 configuration and Pt0 oxidation state of the metal were unambiguously established by X-ray photoelectron spectroscopy and DFT calculations. The coordination of Lewis acids as Z-type ligands is a powerful mean to stabilize elusive electron-rich metal complexes and achieve uncommon geometry.

Bright InP Quantum Dots by Mid-Synthetic Modification with Zinc Halides

InP quantum dots (QDs) attract growing interest in recent years, owing to their environmental advantages upon applications in display and lighting. However, compared to Cd-based QDs and Pb-based perovskites, the synthesis of InP QDs with high optical quality is relatively more difficult. Here, we established a mid-synthetic modification approach to improve the optical properties of InP-based QDs. Tris(dimethylamino)phosphine ((DMA)3P) and indium iodide were used to prepare InP QDs with a green emission (∼527 nm). By introducing zinc halides (ZnX2) during the mid-synthetic process, the photoluminescence quantum yield (PLQY) of the resulting InP/ZnSeS/ZnS core/shell/shell QDs was increased to >70%, and the full-width-at-half-maximum (FWHM) could be narrowed to ∼40 nm. Transmission electron microscopy clearly showed the improvement of the QDs particle size distribution after introducing ZnX2. It was speculated that ZnX2 was bound to the surface of QDs as a Z-type ligand, which not only passivated surface defects and suppressed the emission of defect states but also prevented Ostwald ripening. The InP cores were also activated by ZnX2, which made the growth of the ZnSeS shell more favorable. The photoluminescence properties started to be improved significantly only when the amount of ZnX2 exceeded 0.5 mmol. As the amount increased, more ZnX2 was distributed around the QDs to form a ligand layer, which prevented the shell precursor from crossing the ligand layer to the surface of the InP core, thus reducing the size of the InP/ZnSeS/ZnS QDs. This work revealed a new role of ZnX2 and found a method for InP QDs with high brightness and low FWHM by the mid-synthetic modification, which would inspire the synthesis of even better InP QDs.

Revised Mechanism of C(sp3)-C(sp3) Reductive Elimination from Ni(II) with the Assistance of a Z-Type Metalloligand.

Reductive elimination is a key step in Ni-catalyzed cross-couplings. Compared with processes that proceed from Ni(III) or Ni(IV) intermediates, C(sp3)-C(sp3) reductive eliminations from Ni(II) centers are challenging due to the weak oxidizing ability of Ni(II) species. In this report, we present computational evidence that supports a mechanism in which Zn coordination to the nickel center as a Z-type ligand accelerates reductive elimination. This Zn-assisted pathway is found to be lower in energy compared with direct reductive elimination from a σ-coordinated Ni(II) intermediate, providing new insights into the mechanism of Ni-catalyzed cross-coupling with organozinc nucleophiles. Mayer bond order, Hirshfield charge, Laplacian of the electron density, orbital, and interaction region indicator analyses were conducted to elucidate details of the reductive elimination process and characterize the key intermediates. Theoretical calculations indicate a significant Z-type Ni-Zn interaction that reduces the electron density around the Ni center and accelerates reductive elimination. This mechanistic study of reductive elimination in Ni(0)-catalyzed conjunctive cross-couplings of aryl iodides, organozinc reagents, and alkenes is an important case study of the involvement of Zn-assisted reductive elimination in Ni catalysis. We anticipate that the novel Zn-assisted reductive elimination mode may extend to other cross-coupling processes and explain the unique effectiveness of organozinc nucleophiles in many instances.

Surface Chemistry of InP Quantum Dots, Amine–Halide Co-Passivation, and Binding of Z-Type Ligands

Understanding and controlling the surface chemistry of colloidal quantum dots (QDs) are essential steps toward improving their opto-electronic properties and tailoring the material for specific applications. For oleylamine–chloride co-passivated InP QDs synthesized using di-ethylaminophosphine (DEAP), knowledge of possible exchange reactions and their effect on the QD properties is still very limited. In this work, we address this issue by a combination of experimental and computational studies. First, we prove that InP QDs are passivated by a combination of oleylamine (OlNH2) and chloride, bound as L-type and X-type ligands, respectively. By exposure to organic acids such as carboxylic acids or thiols, this L–X combination can be replaced with oleylammonium chloride in an acid–base-mediated ligand exchange reaction that results in the binding of carboxylates or thiolates as X-type ligands. The latter tend to quench the band-edge emission by forming strongly localized mid-gap states on the sulfur atoms of the thiolates. Furthermore, we observe that the binding of ZnCl2 to the InP QD surface, a process enabled by the prior complexation of this Z-type ligand with OlNH2, considerably increases the band-edge emission. However, as the resulting photoluminescence efficiency remains modest, we conclude that InP QDs synthesized using DEAP feature a diverse set of surface states, for which passivation depends at least on the elimination of undercoordinated surface phosphorous and the choice of the X-type ligand.

Computational Study on the Role of Zn(II) Z-Type Ligands in Facilitating Diaryl Reductive Elimination from Pt(II)

Electron-accepting, or Z-type, ligands offer new potential for affecting the reactivity of transition-metal complexes. A better understanding of the precise mechanisms by which Z-type ligands affect reactivity will aid in taking advantage of their unique properties. It was previously shown that a ZnArF2 additive (where ArF = C6F5) can bind to phenPt(II)Ar2 (where phen = phenanthroline and Ar = p-C6H4tBu) as a Z-type ligand and enable quantitative reductive elimination at 60°C [Liberman-Martin, A. L. Chem. Commun. 2016, 52(43), 7039−7042]. In the present study, density functional theory (DFT) calculations were used to gain insight into the role of the ZnArF2 Z-type ligand in facilitating reductive elimination. The computed Gibbs activation energies with and without ZnArF2 are 41.4 and 44.5 kcal mol–1, respectively. Therefore, simply the presence of the Z-type ligand lowers the barrier by 3.1 kcal mol–1, which is insufficient to account for the experimentally observed effect of ZnArF2. An alternative mechanism is therefore identified. First, the phenanthroline is sequestered by excess ZnArF2 followed by the transfer of one of the ArF groups to the Pt(II) center to form a zwitterionic [ZnArF]+[ArFPtAr2]− complex. An estimate of the overall Gibbs activation energy for this process is 25.1 kcal mol–1, and subsequent reductive elimination occurs with a Gibbs activation energy of 10.1 kcal mol–1. These values are consistent with experimental observations of the reaction. An analysis of the interaction energies of each of the ligands in the reductive elimination model systems generated by the mechanistic study suggests that the effective charge transfer to the Z-type ligand in the zwitterionic complex helps lower the reductive elimination barrier, but the ability to obtain a three-coordinate complex (e.g., in the absence of phenanthroline) is more important.