Oil Yield Research Articles

Formulation of a High-Quality Cold-Pressed Vegetable Oil (Virgin) Based on a Blend of Four Oilseeds.

Vegetable oils are crucial for the human diet, providing energy and essential fatty acids. This study investigates the formulation of a high-quality cold-pressed vegetable oil blend from rapeseed, sunflower, sesame, and safflower, chosen for their agronomic benefits, cost-effectiveness, and reduced environmental impact. For the first time, this study is carried out in order to enhance the nutritional profile of these blend oils compared to commercial oils. The study's results showed that all formulated blend oils had higher total polyphenol and flavonoid content. Specifically, the blend of 1/2 rapeseed, 1/4 sunflower, 1/8 sesame, and 1/8 safflower had an oil yield ranging from 37 to 39% and was rich in total polyphenols (18 mg GAE/100 g), total flavonoids (2 mg/g), antioxidant activities (52%), oleic acid (46.4%), and saturated fatty acids (11%), with a balanced omega-6/omega-3 ratio (2.5). Consuming this blend oil offers a healthier choice rich in nutrients and natural antioxidants. This could open new market opportunities and cater to the growing demand for healthier oil options, especially since it is extracted without a refining process. Further research could focus on the sensory attributes and consumer acceptance of these blend oils to ensure market success, noting that sesame and sunflower involve agreeable pronounced aromas.

Enhancing oil shale pyrolysis using metal-doped carbon quantum dot catalysts: A comprehensive behavioral, kinetic, and mechanistic analysis

Current oil shale extraction technologies face significant challenges, including high heating costs, slow pyrolysis reaction rates, and low efficiency, which hinder effective resource exploitation. To address these issues, this study synthesized three types of metal-doped carbon quantum dot (M/CQD) catalysts—Co/CQDs, Ni/CQDs, and Mn/CQDs—and tested their effects on the pyrolysis of oil shale. The introduction of these catalysts resulted in a notable enhancement of the pyrolysis process, reducing the required activation energy by approximately 40 % and lowering the initiation temperatures for Co/CQDs, Ni/CQDs, and Mn/CQDs by 64 °C, 62 °C, and 94 °C, respectively. Consequently, the yield of shale oil increased significantly by 23.1 %, 13.3 %, and 19.8 % for each catalyst. Kinetic and product analyses indicate that these catalysts facilitate electron transfer from organic molecules, promoting the formation of free radicals and the cleavage of C–C bonds. This enhancement leads to an increased production of short-chain hydrocarbons and a reduction in oxygenates and esters, thereby improving the quality of the shale oil. Further insights from Density Functional Theory (DFT) calculations suggest that the catalysts enhance pyrolysis by promoting the formation of carbocations and synergizing with radicals released from the shale, intensifying the pyrolysis process. This study not only elucidates the catalytic mechanisms that enhance oil shale pyrolysis but also offers a promising approach to overcome technological challenges in shale resource recovery, such as high heating costs and low efficiency, paving the way for more efficient and cleaner shale oil production.

Application of ionic liquids as co-solvent for oil extraction from desert date

The extraction of oil from Balanites seed (desert date) using ultrasound-assisted extraction was investigated using organic solvent (ethyl acetate) and ionic liquid as co-solvent. The study found that an optimum oil yield of 28.67 % was obtained using a seed to solvent ratio of 1:6, an extraction temperature of 50 °C and an extraction time of 30 min when ethyl acetate was used as the sole solvent in the extraction system. Different types of ionic liquids as co-solvents were screened in this study and an improvement of oil yield (3–6 %) was observed using 1-butyl-3-methylimidazolium acetate. Additionally, the presence of ionic liquid as a co-solvent during the extraction process could achieve a similar oil yield at a lower extraction temperature. This indicates the potential breakdown of the lignocellulosic cell wall of the seed using 1-butyl-3-methylimidazolium acetate. The presence of 1-butyl-3-methylimidazolium acetate as co-solvent can enhance the penetration of the organic solvent into the Balanites seed matrix for oil extraction and can reduce the energy required for the extraction process.

Water hyacinth biorefinery: Improved biofuel production using Trichoderma atroviride pretreatment

AbstractThe pyrolysis of water hyacinth is gaining attention and acceptance as a resource recovery technique due to its availability and economic viability. However, the presence of lignin, one of the three major biomass fractions, presents significant challenges for profitable water hyacinth processing for biofuel production. Fungal pretreatment of water hyacinth for lignin breakdown has been explored but the application of Trichoderma atroviride as a pretreatment for pyrolysis is relatively novel. The efficacy of T. atroviride pretreatment in improving water hyacinth's pyrolytic products using a fixed‐bed reactor was therefore investigated in this study. The optimization process was studied using a central composite design in response surface methodology with Design Expert 13. Delignification of the biomass was established because the elemental analysis showed a 25.42% increase in cellulose content and a 23.40% and 3.37% decrease in lignin and hemicellulose content, respectively. The biomass pretreatment applied influenced the physical and chemical characteristics of the pyrolytic products. The highest pyrolysis oil yield increased by 25.81% at 575 °C and particle size 2290 μm, and the highest char yield decreased by 4.23% at 273 °C and particle size 1500 μm. This research is crucial for policy and research conversations as it offers a scientific basis for the application of T. atroviride pretreatment in biomass pyrolysis technology and emphasizes the optimal utilization of water hyacinths to obtain socio‐environmental benefits.

Optimizing Lemon Balm (Melissa Officinalis L.) Cultivation: Effects of Different Manures on Plant Growth and Essential Oil Production During Consecutive Harvests

This study examined the impact of organic manures from different sources (poultry, sheep, and cattle) on lemon balm (Melissa officinalis L., Lamiaceae) during different harvests. Manure application increased the photosynthetic pigments levels (chlorophyll-a, 9–41%; chlorophyll-b, 24–60%), biomass (41–60%), and essential oil yield (60–71%). Sheep manure treatment exhibited the highest antioxidant capacity among all the manures tested. Through GC-MS and GC-FID analysis, 10 chemical constituents were identified in the essential oil, accounting together for 91–95% of the total composition. The primary chemical component was geranial (39–46%), followed by neral (28–35%), (E)-caryophyllene (4.7–11%), geranyl acetate (2.7–5.9%), and caryophyllene oxide (1.7–4.8%). The utilization of livestock manures significantly improved the quality of the essential oil in terms of neral and geranial percentages compared to the control. Notably, during mid-August and early October, there was a substantial rise in these valuable compounds. However, a decrease in geranyl acetate and oxygenated monoterpenes resulted in a decline of the antioxidant capacity to 3%. Consequently, it is recommended to utilize essential oils from the second and third harvests for industrial purposes. Overall, the use of livestock manures, especially sheep manure, as a nutrient source for lemon balm cultivation, proves to be a viable approach for producing high-quality essential oils.

Revealing the Potential of Star Anise Essential Oil: Comparative Analysis and Optimization of Innovative Extraction Methods for Enhanced Yield, Aroma Characteristics, Chemical Composition, and Biological Activities.

Star anise has been used for a long time in improving human health and curing diseases, owing to its unlimited components with complex chemical structures and a wide range of bioactivities. This study is aimed to investigate the influence of extraction methods (steam distillation, ethanol Soxhlet extraction, supercritical carbon dioxide extraction, subcritical n-butane extraction) on the yield, aroma properties, chemical composition, and bioactivity of star anise essential oils. Electronic nose detection revealed the essential oils from subcritical extraction exhibited the most intense aroma, while the essential oils from ethanol Soxhlet extraction had a more complex aroma profile. Fourier-transform infrared analysis showed the presence of benzene rings, carbonyl groups, C=C, and aromatic ether bonds in the essential oils extracted through different methods. The major components were heterocyclic olefins, heterocyclic oxygenates, and aromatic oxygenates, as well as certain amounts of flavonoids and polyphenols. Correlation analysis revealed the relative contents of volatile trans-anethole, wormwood, d-limonene, cineole, and trans-α-citronelene were strongly associated with the antibacterial activity of the essential oils. Similarly, the contents of volatile components (d-limonene, cineole) and non-volatile components (total flavonoids and total polyphenols) were strongly correlated with the DPPH scavenging activity of the essential oils. These results confirm the effectiveness of the ethanol Soxhlet extraction method in retaining the bioactivity of the essential oils. Finally, with a Box-Behnken central composite design of response surface and single-factor experiments, the optimal extraction conditions for the ethanol Soxhlet method were determined: ultrasonic frequency of 80 kHz, crushing particle size of 60 meshes, liquid-material ratio of 8:1 (mL:g), and ultrasonic time of 35 min. Under these conditions, the essential oil yield was 25.51% ± 0.21%. Overall, these findings highlight the significance of extraction methods in obtaining high-quality star anise essential oils with desirable aroma properties and potent bioactivities.

Enhanced hydrothermal liquefaction of tires using zinc and MoS2

This study introduces a novel approach for tire liquefaction employing zinc and unsupported catalyst MoS2 to mitigate oxygen, nitrogen, and sulfur content, while inhibiting poly-aromatic formation. Autoclave experiments were conducted under subcritical water conditions at 360 and 410 °C. Comprehensive characterization of char and oil was performed, encompassing elemental analysis, functional-group assessment, and composition analysis using gas chromatography-mass spectrometry (GC-MS) and Fourier-transform ion cyclotron resonance mass spectrometry (FT-ICR MS). During the liquefaction, zinc metal pellets react with water to form ZnO and hydrogen, aiding hydrogenation, and MoS2 preserves its catalytic stability. ZnO shows a catalytic effect on deoxygenation, desulfurization, and denitrification reactions. However, the reaction between ZnO and H2S is not favorable under hydrothermal conditions. Zinc and MoS2 synergistically promote cracking of heavier compounds into lighter ones, particularly evident at higher temperatures, without diminishing the overall oil yield. Incorporating zinc pellets and MoS2 slightly facilitates sulfur and oxygen migration from liquid to solid and gas phases. FT-ICR MS analysis reveals oxygen, sulfur, and nitrogen-containing compounds in heavy fraction of oils. The oxygen-containing compounds, predominantly comprised of stearic acid and its derivatives, are identified. Concurrently, the nitrogen-containing compounds manifest primarily as basic nitrogen compounds. MoS2 possesses the capability of forming more N-containing compounds, leading to the generation of a broader spectrum of N-containing compounds. This work elucidates the synergistic role of zinc-assisted catalysis and MoS2, offering insights into tire liquefaction mechanisms and product composition, vital for sustainable waste management and resource recovery.

Investigations on the effect of kaolin catalyst on the yield of various products obtained from pyrolysis of low-density polyethylene (LDPE) wastes and reaction kinetics.

The pyrolysis characteristics of low-density polyethylene (LDPE) wastes were investigated in a batch pyrolyzer in the temperature range of 550-650°C for a varying heating rate (5, 10, 15, 20, and 25°C/min) alone and using kaolin catalyst (10, 15, and 20% w/w). The yield distribution of various products under varying operating conditions was investigated, and the corresponding favourable conditions for maximum yield of pyrolytic oil (PO) were identified. The possible effect of the catalyst on pyrolysis kinetics was explored by extracting activation energies from the TGA experiments. The various model-free iso-conversion methods estimated the activation energy of 162-166kJ/mol during thermal degradation of LDPE, while it shifted to a lower range (138-145kJ/mol) on catalytic treatment. The catalytic pyrolysis with a 20% (by mass) catalyst in a batch pyrolyzer provided the maximum PO yield with the least solid residue at 600°C using a heating rate of 20°C/min, while the temperature of 600°C with 10% catalyst showed the least liquid product with more solid residue. The presence of a catalyst improved the oil quality with transparency and lower viscosity due to lighter hydrocarbons and higher aromatic content. The FTIR analysis detected various organic groups-alkanes, alkenes, cyclic, and aromatics in the oil. GC tests of gaseous products confirmed the gases like hydrogen, propane, butane, and propylene. The present study aims to provide technical know-how for the effective utilization of LDPE wastes towards clean energy sources and create a plastic-free green environment.

Biofortification of iron and zinc under late-season water deficit and iron and zinc deficiency on yield and fatty acid composition of flaxseed

Iron and zinc are essential for plant and human health. Biofortification is crucial for improving crop performance. We studied how biofortification of iron and zinc to flaxseed affected its yield, fatty acid composition, and antioxidant capacity in soil water and nutrient deficiency conditions. We tested nutritional impacts of iron and zinc (0, 4, and 8 g l−1) during the onset of stem elongation (VS) and flowering (RS) within two distinct environments (well-watered (WW) and after-anthesis water deficit (WD), and their interactions, on yield and fatty acid composition of flaxseed in 2018 and 2019 in Kermanshah, Iran. Based on the results in WW, seed, oil, protein, and mucilage yield were 1756, 646, 285, and 131 kg ha−1, and WD reduced seed and oil yield by 24, 33, and significantly increased saturated fatty acids, total phenol, and zinc in the seeds. In WW and WD, iron and zinc fortification significantly increased seed, oil, and protein yield, total phenol, unsaturated fatty acids and iron and zinc in the seeds. Path analysis showed that the number of seed capsule−1 and capsule plant−1 in the WW and WD, respectively, had the most direct and positive impact on seed, oil, mucilage, and protein yield. These findings suggest that oil yield was more sensitive to WD compared to seed, mucilage, and protein yield, and application of iron and zinc can boost the oil quantity and quality, iron, zinc content, and antioxidant capacity by minimizing the harmful impacts of WD.

Proteomic Analysis of the Major Alkali-Soluble Inca Peanut (Plukenetia volubilis) Proteins.

Sacha Inchi (Plukenetia volubilis) oil press-cake (SIPC) represents a new source of proteins of high biological value, with promissory food applications. However, knowledge of these proteins remains limited. In this study, a Sacha Inchi protein concentrate (SPC) was extracted from the SIPC, and proteomic analysis was performed to identify the major alkaline-soluble proteins. The electrophoretic profile highlighted the efficacy of alkaline pH and moderate temperature to extract the major proteins, from which a group of proteins, not previously reported, were registered. LC-MS/MS analyses produced abundant high-quality fragmentation spectra. Utilizing the Euphorbiaceae database (DB), 226 proteins were identified, with numerous well-assigned spectra remaining unidentified. PEAKS Studio v11.5 software generated 1819 high-quality de novo peptides. Data are available via ProteomeXchange with identifier PXD052665. Gene ontology (GO) classification allowed the identification of sequenced proteins associated with biological processes, molecular functions, and cellular components in the seed. Consequently, the principal alkali-soluble proteins from SPC were characterized through derived functional analysis, covering 24 seed-storage-, 27 defense-, and 12 carbohydrate- and lipid-metabolism-related proteins, crucial for human nutrition due to their sulfur-containing amino acids, antioxidant properties, and oil yields, respectively. This research makes a significant contribution to the current understanding of the Sacha Inchi proteome and offers valuable insights for its potential applications in the food industry.

Determination of global yield isotherms of macaúba (Acrocomia aculeata) extract using supercritical CO2 and its biological potential

This study investigates the effectiveness of macaúba oil extraction using supercritical carbon dioxide, focusing on determining operational parameters such as temperature and pressure that maximize the quality and yield of the extract obtained. The extraction was carried out using freeze-dried macaúba pulp, under varying conditions of pressure and temperature. The overall yield isotherms of macaúba oil obtained, the solubility of the solute, composition of fatty acids, triglycerides, phenolic compounds, in addition to the antioxidant capacity and antimicrobial activity, were evaluated, before and after extraction. The results demonstrated that, under the conditions evaluated, the extraction process achieved maximum oil yields of 24.4 %, with a predominance of unsaturated acids rich in antioxidants and high concentrations of oleic acid (64.12 %), β-carotene (80.06 mg/kg) and α-tocopherol (114.66 mg/100 g of oil). This promising method offers a sustainable alternative for the production of compounds with high nutritional value, highlighting its potential for industrial applications.

Research Progress on the Quality, Extraction Technology, Food Application, and Physiological Function of Rice Bran Oil.

Rice bran oil is recommended by the World Health Organization as one of the three major healthy edible oils (along with corn and sesame oils), owing to its unique fatty acid composition and functional components. This study screened, organized, and analyzed a large number of studies retrieved through keyword searches, and investigated the nutritional value and safety of rice bran oil. It reviews the stability of raw rice bran materials and the extraction and refining process of rice bran oil and discusses food applications and sub-health regulations. Research has found that a delayed stabilization treatment of rice bran seriously affects the overall quality of rice bran oil. Compared with traditional solvent extraction, the new extraction technologies have improved the yield and nutritional value of rice bran oil, but most of them are still in the research stage. Owing to the lack of economical and applicable supporting production equipment, extraction is difficult to industrialize, which is a challenging research area for the future. Rice bran oil has stronger antioxidant stability than other edible oils and is more beneficial to human health; however, its application scope and consumption are limited owing to the product price and lack of understanding. Rice bran oil has significant antioxidant, anti-inflammatory, anti-cancer, hypoglycemic, lipid-lowering, and neuroprotective effects. Further exploratory research on other unknown functions is required to lay a scientific basis for the application and development of rice bran oil.

Effects of Different Weeding Methods on Soil Physicochemical Properties, Root Morphology, and Fruit Economic Traits in Camellia oleifera Abel. Plantations

Soil physicochemical properties, root characteristics, and fruit economic traits were determined in Camellia oleifera plantations under spontaneous vegetation + mowing (W1), spontaneous vegetation + glyphosate (W2), and no weeding (CK) treatments. Compared with CK, W1 reduced soil bulk density and increased total nitrogen, total phosphorus, ammonium nitrogen, nitrate nitrogen, and effective potassium content. W2 treatment resulted in higher bulk density than W1 and lower water-holding capacity, total nitrogen, total phosphorus, total potassium, ammonium nitrogen, nitrate nitrogen, and available potassium of the soil. Generally, both W1 and W2 inhibited weed morphological traits while favoring the C. oleifera root system, with the W1 treatment resulting in the greatest increase. Fruit transverse diameter, longitudinal diameter, yield, and oil yield were higher in W1 than in CK and W2 treatments. Weed root systems and C. oleifera root systems ultimately affect oil production and yield by affecting bulk density, ammonium nitrogen, nitrate nitrogen, fruit transverse diameter, seed yield, and seed kernel oil content. In summary, W1 treatment improved the physicochemical properties, root growth, fruit growth, and soil quality in C. oleifera plantations.

REMOVING RESIDUAL OIL BY INJECTING A SOLUTION-AIR COMPOSITION THROUGH A NEW INJECTOR INTO THE WETTED FORM

In the literature, the physical mechanism of the method of increasing the oil yield of the formation by means of elastic waves is indicated by various terms: vibrating, acoustic, elastic, pulsed, seismoacoustic, etc. We will talk about a general term that illuminates them in their physical essence - the method of wave action. Until now, some industrial-experimental application of the wavy impact method has been carried out in the fields of the former USSR and foreign countries. The wave field is divided into two parts according to the value of the generation frequency - the low-frequency effect of the method (up to 1 kHz) and the high-frequency effect of the method (higher than 1 kHz). The conversion of the first generated energy, the vibrating wave, into elastic energy is divided into mechanical, hydraulic, gas-pneumatic, electromechanical, etc. The use of this and other modifiers is chosen depending on the type of determined method of influence (increasing oil yield, intensification of filtration and reception), the geological and technical condition of the field and individual wells, and most importantly, the expected technical and economic effect. The wave effect is carried out near the selected area of the formation from the ground surface and the wellhead, using special vibration and impulse sources. The main issue of the acceptance of the wave effect method is the understanding of the physical process of elastic wave radiation in a porous medium saturated with formation fluids. Abasov MT, Hadiyev SM, Mirzajanzade AX, Krylov AP, Khavkin AY, etc., are the main works of this issue. carried out by the authors, it was possible to reveal the physical meaning of the processes taking place in the layer. Many modern oil recovery methods, such as the wave effect method, help to reduce the influence of some factors that make oil extraction difficult. However, they do not take into account the fact that they are not applied in time and that natural hydrocarbon fluids move under the influence of gravitational effects and capillary forces, which leads to a decrease in technical and economic indicators. Keywords: injector, diffuser, elastic waves, generation, frequency effect.

Diversity analysis and evaluation of lemongrass (Cymbopogon flexuosus) accessions for morphological, oil yield and oil composition traits under different fertility levels for Uttarakhand region

Lemongrass (Cymbopogon flexuosus) is a highly valuable aromatic and therapeutic herb, well known for its essential oil content. The present study was carried out during 2021–2023 at Centre for Aromatic Plants, Selaqui, Dehradun, Uttarakhand to analyse the diversity of various lemongrass accessions collected from Uttarakhand for their morphological traits, oil yield, and oil composition traits. These various lemongrass accessions were further evaluated in a randomized complete block design (RCBD) with three replications under different fertility levels for their agro- morphological performance. Yield components such as herb yield and essential oil yield, including oil composition, were also determined. Statistical analysis and genetic parameters indicated significant variations among lemongrass accessions for the majority of morphological and yield traits. Accessions AC-16 and AC-37 performed superiorly for traits such as plant height, leaf length, and width, whereas accessions AC-51 and AC-37 showed higher herb and oil yields under an increased dose of fertilizer. The accessions showed wide variability with respect to oil composition; from our study, we identified each of the three citral-rich (AC-16, AC-37, and AC-51) and geraniol-rich (AC-20, AC- 71, and AC-65) accessions. The better-performing accessions for morphological, yield and oil composition related traits may also be used in breeding programmes as potential genetic stock.

Elucidating synergistic effects and environmental value enhancement in infrared-Assisted Co-Pyrolysis of coal and polyvinyl chloride

Co-pyrolysis of high-alkali coal and polyvinyl chloride (PVC) through infrared heating is a promising approach for managing escalating PVC waste and converting low-grade coal resources efficiently. The synergistic effects during co-pyrolysis and thermal degradation of PVC were studied through thermogravimetric analysis (TG-FTIR) and spectral analysis. Furthermore, chlorine migration and chemical transformation integral to the process, along with catalytic interactions, were explored through chlorine mass balance assessment, employing X-ray photoelectron spectroscopy and ion chromatography to establish a groundbreaking understanding of these phenomena. The results of products exhibited a trend of initially increasing and then decreasing with increasing temperatures and mixing ratios. The maximum oil yield was 14.62 %, achieving at 600 °C and 20 %. Meanwhile, the content of aromatic hydrocarbons remained high level through the synergistic interaction of Lewis and Brønsted acid sites, nearly exceeding 60 %. The results showed that the Artificial Neural Network model had a high prediction accuracy with an R2 value of 0.99, while the decarboxylation effect dissociated the metal, resulting in an increase in the fixation of inorganic chlorine from 1 % to 66 % and a decrease in the chlorine content in the liquid phase. Innovatively, the study employs an ANN model for predicting the behavior of co-pyrolysis, exemplifying high accuracy in understanding complex thermal conversions of PVC and coal. Notably, the work challenges existing constraints by applying sophisticated analytical methods to elucidate the thermodynamics and kinetics of the co-pyrolysis processes, thereby enhancing the energetic and environmental value of the products.

Artificial neural network models for forecasting the extracted yield of essential oils from Curcuma longa L. by hydro-distillation

Abstract Turmeric is commonly acknowledged in traditional medical practices for its strong healing properties. In the present work, hydro-distillation was employed to extract essential oils from turmeric powder. The response surface methodology (RSM) was applied to investigate the effects of various parameters, including evaporation rate (0.23, 0.5, 0.8, 0.97, 1.36, 2 ml/min), solid/liquid ratio (4:100, 6:100, 8:100, 1:10, 11:100 g/ml), and extraction duration (13–250 min) on the yield of essential oils. The central composite design (CCD) proved to be an effective tool for evaluating the extraction yield of essential oils. A three-layer artificial neural network (ANN) was utilized to develop the extraction model, employing the Levenberg–Marquardt (LM) optimization algorithm. The neural network’s input layer comprised the solid/liquid ratio, evaporation rate, and extraction time, while the output layer indicated the yield of essential oil extraction. The most appropriate model included a hidden layer with 16 neurons, achieving R 2 and MSE values of 0.9989 and 0.0013, respectively. This investigation indicates that an artificial neural network prediction model serves as an effective method for estimating essential oil yield.

Effect of Kappaphyscus alvarezii seaweed liquid extract on growth, yield and chemical constituents of Geranium (Pelargonium graveolens l’ Herit. ex Aiton)

The application of seaweed-based fertilizers is an important renewable resource and gaining considerable attention in the present scenario of agriculture and horticulture as organic nutrient input and growth promoters. The present study was conducted to examine the effect of seaweed liquid extract on growth, yield, and chemical constituents of the important aromatic plant geranium. The experiments were conducted in the CSIR-CIMAP, Research Center, Bengaluru (Karnataka, India) during the Rabi season of 2018–2019 and 2019–2020. The results of pooled data over two years revealed that application of Kappaphycus alvarezii seaweed liquid extract (KSWE) along with RDF at a concentration of 15% significantly improved the plant height (71.37 ± 0.69 cm), plant canopy (68.24 ± 1.60 cm), herb yield (42.71 ± 2.45 t ha−1year−1) and oil recovery (0.36 ± 0.02%) as compared over RDF. An account of 23.14% and 23.87% increase in herbage and essential oil yield was recorded over RDF. The functional relationship between herb and oil yield of geranium with different concentrations of seaweed extract applied at different crop stages was strongly correlated (r 2=0.97 and r 2=0.91, respectively). The chemical profile of essential oil reveals that higher amounts of linalool (7.5%) isomenthone (6.65%), geranial (1.29%), geranyl formate (3.81%), and the highest citronellol to geraniol (C:G ratio) ratio of 2.14 was noticed in the treatment which receives 15% KSWE along with RDF. The study clearly exhibits the notable benefits in the performance of geranium with the application of 15% of aqueous seaweed extract from Kappaphyscus alvarezii both in quantitative and qualitative terms.

Application of Fe2O3 nanoparticles improves the growth, antioxidant power, flavonoid content, and essential oil yield and composition of Dracocephalum kotschyi Boiss.

Dracocephalum kotschyi Boiss., an endemic and endangered medicinal and aromatic plant in Iran, showcases distinct botanical characteristics and therapeutic promise. According to the IUCN grouping criteria, this plant is facing challenges due to overcollection from its natural habitats. To address this issue, there is an increasing inclination towards cultivating this species within agricultural systems. This study aimed to evaluate the impact of applying Fe2O3 nanoparticles (NPs) at varying concentrations (50, 100, and 200 mg L-1), as well as bulk Fe2O3 at the same concentrations, on the growth, essential oil production, antioxidant capacity, total phenol, and flavonoid content of D. kotschyi. The foliar application of 100 and/or 200 mg L-1 of Fe2O3 NPs resulted in the greatest leaf length and dry weight, while Fe2O3 NPs at the level of 100 mg L-1 led to the highest leaf/stem ratio. Additionally, spraying 200 mg L-1 of Fe2O3 NPs and all concentrations of bulk Fe2O3 positively impacted chlorophyll and carotenoid levels. Both nano and bulk Fe2O3 supplements stimulated H2O2 production and subsequently enhanced enzymatic antioxidant activity. The use of 50 mg L-1 of Fe2O3 NPs resulted in the highest flavonoid content and non-enzymatic antioxidant activity. Meanwhile, the highest essential oil content and yield was achieved by the application of 50 and/or 100 mg L-1 Fe2O3 NPs. The addition of low concentration of Fe2O3 NPs (50 mg L-1) resulted in a significant increase in the concentration of geranial, while a higher supply of Fe2O3 NPs (200 mg L-1) significantly decreased the percentage of neral in the essential oil. Overall, the application of Fe2O3 NPs demonstrated significant potential for increased biomass, enhanced yield, essential oil production, and phytochemical attributes. The findings highlight the versatility of Fe2O3 NPs at optimal concentrations, acting as both a nano-fertilizer and a nano-inducer, promoting the production and accumulation of valuable secondary metabolites in plants.

Seaweed extract and fulvic acid application affect the biomass performance, the essential oil yield and composition of Sicilian oregano grown in an organic agricultural system

Origanum vulgare ssp. hirtum is one of the taxa used as ‘oregano’ and is medicinal and aromatic plant (MAP) utilized worldwide in various sectors. Nowadays, agricultural systems are moving towards sustainable, organic, and environmentally friendly agricultural production and biostimulants have been used in recent years as a potential strategy. The objective of this research was to investigate the influence of seaweed extract based on Aschophyllum nodosum (AN) and fulvic acid (FA), applied with two different doses, on morphological parameters, fresh and dry yield, essential oil (EO) traits, total phenolic content (TPC), antioxidant activity (AA) and rosmarinic acid content (RAC) of organic oregano. Two-year experiment was conducted using a randomized complete block design with one main factor (foliar biostimulant) and 3 replicates. In AN- and FA-treated plants, increases in fresh biomass between 0.3 and 8.4 t ha−1 and in dry biomass between 0.5 and 3.0 t ha−1 were observed. The application of the lowest doses of fulvic acid (FA4) produced the highest EO contents (3.49 % and 3.46 %) and EO yields (73.3 and 97.4 kg ha−1) in both years. The application of the lowest doses of FA produced an increase (on average 4 %) in thymol content. Biostimulant application generated contrasting response, and, in some cases, a reduction in some chemical parameters compared with control plants. The findings of this study contribute to add novelty in cultivation of oregano. The application of low doses of AN and FA allows to increase yields and improve some qualities of the secondary metabolites from organic oregano.