Homologous Recombination In Yeast Research Articles

Efficient Assembly of DNA Using Yeast Homologous Recombination (YHR).

The assembly of multiple DNA parts into a larger DNA construct is a requirement in most synthetic biology laboratories. Here we describe a method for the efficient, high-throughput, assembly of DNA utilizing the yeast homologous recombination (YHR). The YHR method utilizes overlapping DNA parts that are assembled together by Saccharomyces cerevisiae via homologous recombination between designed overlapping regions. Using this method, we have successfully assembled up to 12 DNA parts in a single reaction.

Telomere Dysfunction Triggers Palindrome Formation Independently of Double-Strand Break Repair Mechanisms.

Inverted chromosome duplications or palindromes are linked with genetic disorders and malignant transformation. They are considered by-products of DNA double-strand break (DSB) repair: the homologous recombination (HR) and the nonhomologous end joining (NHEJ). Palindromes near chromosome ends are often triggered by telomere losses. An important question is to what extent their formation depends upon DSB repair mechanisms. Here we addressed this question using yeast genetics and comparative genomic hybridization. We induced palindrome formation by passaging cells lacking any form of telomere maintenance (telomerase and telomere recombination). Surprisingly, we found that DNA ligase 4, essential for NHEJ, did not make a significant contribution to palindrome formation induced by telomere losses. Moreover RAD51, important for certain HR-derived mechanisms, had little effect. Furthermore RAD52, which is essential for HR in yeast, appeared to decrease the number of palindromes in cells proliferating without telomeres. This study also uncovered an important role for Rev3 and Rev7 (but not for Pol32) subunits of polymerase ζ in the survival of cells undergoing telomere losses and forming palindromes. We propose a model called short-inverted repeat-induced synthesis in which DNA synthesis, rather than DSB repair, drives the inverted duplication triggered by telomere dysfunction.

Use of homologous recombination in yeast to create chimeric bovine viral diarrhea virus cDNA clones.

The open reading frame of a Brazilian bovine viral diarrhea virus (BVDV) strain, IBSP4ncp, was recombined with the untranslated regions of the reference NADL strain by homologous recombination in Saccharomyces cerevisiae, resulting in chimeric full-length cDNA clones of BVDV (chi-NADL/IBSP4ncp#2 and chi-NADL/IBSP4ncp#3). The recombinant clones were successfully recovered, resulting in viable viruses, having the kinetics of replication, focus size, and morphology similar to those of the parental virus, IBSP4ncp. In addition, the chimeric viruses remained stable for at least 10 passages in cell culture, maintaining their replication efficiency unaltered. Nucleotide sequencing revealed a few point mutations; nevertheless, the phenotype of the rescued viruses was nearly identical to that of the parental virus in all experiments. Thus, genetic stability of the chimeric clones and their phenotypic similarity to the parental virus confirm the ability of the yeast-based homologous recombination to maintain characteristics of the parental virus from which the recombinant viruses were derived. The data also support possible use of the yeast system for the manipulation of the BVDV genome.

Assembly of long DNA sequences using a new synthetic Escherichia coli-yeast shuttle vector.

Synthetic biology is a newly developed field of research focused on designing and rebuilding novel biomolecular components, circuits, and networks. Synthetic biology can also help understand biological principles and engineer complex artificial metabolic systems. DNA manipulation on a large genome-wide scale is an inevitable challenge, but a necessary tool for synthetic biology. To improve the methods used for the synthesis of long DNA fragments, here we constructed a novel shuttle vector named pGF (plasmid Genome Fast) for DNA assembly in vivo. The BAC plasmid pCC1BAC, which can accommodate large DNA molecules, was chosen as the backbone. The sequence of the yeast artificial chromosome (YAC) regulatory element CEN6-ARS4 was synthesized and inserted into the plasmid to enable it to replicate in yeast. The selection sequence HIS3, obtained by polymerase chain reaction (PCR) from the plasmid pBS313, was inserted for screening. This new synthetic shuttle vector can mediate the transformation-associated recombination (TAR) assembly of large DNA fragments in yeast, and the assembled products can be transformed into Escherichia coli for further amplification. We also conducted in vivo DNA assembly using pGF and yeast homologous recombination and constructed a 31-kb long DNA sequence from the cyanophage PP genome. Our findings show that this novel shuttle vector would be a useful tool for efficient genome-scale DNA reconstruction.

Overview of Post Cohen-Boyer Methods for Single Segment Cloning and for Multisegment DNA Assembly.

In 1973, Cohen and coworkers published a foundational paper describing the cloning of DNA fragments into plasmid vectors. In it, they used DNA segments made by digestion with restriction enzymes and joined these in vitro with DNA ligase. These methods established working recombinant DNA technology and enabled the immediate start of the biotechnology industry. Since then, "classical" recombinant DNA technology using restriction enzymes and DNA ligase has matured. At the same time, researchers have developed numerous ways to generate large, complex, multisegment DNA constructions that offer advantages over classical techniques. Here, we provide an overview of "post-Cohen-Boyer" techniques used for cloning single segments into vectors (T/A, Topo cloning, Gateway and Recombineering) and for multisegment DNA assembly (BioBricks, Golden Gate, Gibson, yeast homologous recombination in vivo, and ligase cycling reaction). We compare and contrast these methods and also discuss issues that researchers should consider before choosing a particular multisegment DNA assembly method. © 2016 by John Wiley & Sons, Inc.

Agrobacterium tumefaciens-mediated transformation: An efficient tool for insertional mutagenesis and targeted gene disruption in Harpophora oryzae

The endophytic filamentous fungus Harpophora oryzae is a beneficial endosymbiont isolated from the wild rice. H. oryzae could not only effectively improve growth rate and biomass yield of rice crops, but also induce systemic resistance against the rice blast fungus, Magnaporthe oryzae. In this study, Agrobacterium tumefaciens-mediated transformation (ATMT) was employed and optimized to modify the H. oryzae genes by either random DNA fragment integration or targeted gene replacement. Our results showed that co-cultivation of H. oryzae conidia with A. tumefaciens in the presence of acetosyringone for 48h at 22°C could lead to a relatively highest frequency of transformation, and 200μM acetosyringone (AS) pre-cultivation of A. tumefaciens is also suggested. ATMT-mediated knockout mutagenesis was accomplished with the gene-deletion cassettes using a yeast homologous recombination method with a yeast–Escherichia–Agrobacterium shuttle vector pKOHo. Using the ATMT-mediated knockout mutagenesis, we successfully deleted three genes of H. oryzae (HoATG5, HoATG7, and HoATG8), and then got the null mutants ΔHoatg5, ΔHoatg7, and ΔHoatg8. These results suggest that ATMT is an efficient tool for gene modification including randomly insertional mutagenesis and gene deletion mutagenesis in H. oryzae.

RFWD3-Dependent Ubiquitination of RPA Regulates Repair at Stalled Replication Forks

We have used quantitative proteomics to profile ubiquitination in the DNA damage response (DDR). We demonstrate that RPA, which functions as a protein scaffold in the replication stress response, is multiply ubiquitinated upon replication fork stalling. Ubiquitination of RPA occurs on chromatin, involves sites outside its DNA binding channel, does not cause proteasomal degradation, and increases under conditions of fork collapse, suggesting a role in repair at stalled forks. We demonstrate that the E3ligase RFWD3 mediates RPA ubiquitination. RFWD3 is necessary for replication fork restart, normal repair kinetics during replication stress, and homologous recombination (HR) at stalled replication forks. Mutational analysis suggests that multisite ubiquitination of the entire RPA complex is responsible for repair at stalled forks. Multisite protein group sumoylation is known to promote HR in yeast. Our findings reveal a similar requirement for multisite protein group ubiquitination during HR at stalled forks in mammalian cells.

Construction of Multifragment Plasmids by Homologous Recombination in Yeast.

Over the past decade, the focus of cloning has shifted from constructing plasmids that express a single gene of interest to creating multigenic constructs that contain entire pathways or even whole genomes. Traditional cloning methods that rely on restriction digestion and ligation are limited by the number and size of fragments that can efficiently be combined. Here, we focus on the use of homologous-recombination-based DNA manipulation in the yeast Saccharomyces cerevisiae for the construction of plasmids from multiple DNA fragments. Owing to its simplicity and high efficiency, cloning by homologous recombination in yeast is very accessible and can be applied to high-throughput construction procedures. Its applications extend beyond yeast-centered purposes and include the cloning of large mammalian DNA sequences and entire bacterial genomes.

Rapid and Efficient Plasmid Construction by Homologous Recombination in Yeast.

The cloning of DNA fragments is a fundamental aspect of molecular biology. Traditional DNA cloning techniques rely on the ligation of an insert and a linearized plasmid that have been digested with restriction enzymes and the subsequent introduction of the ligated DNA into Escherichia coli for propagation. However, this method is limited by the availability of restriction sites, which often becomes problematic when cloning multiple or large DNA fragments. Furthermore, using traditional methods to clone multiple DNA fragments requires experience and multiple laborious steps. In this protocol, we describe a simple and efficient cloning method that relies on homologous recombination in the yeast Saccharomyces cerevisiae to assemble multiple DNA fragments, with 30-bp homology regions between the fragments, into one sophisticated construct. This method can easily be extended to clone plasmids for other organisms, such as bacteria, plants, and mammalian cells.

Digging Designer Genomes

Techniques such as Gibson and Golden Gate assembly and homologous recombination in yeast allow researchers to assemble DNA sequences millions of base pairs in length. Sarah Webb investigates the challenges of constructing designer chromosomes and genomes, and their potential applications.

Yeast homologous recombination-based promoter engineering for the activation of silent natural product biosynthetic gene clusters

Large-scale sequencing of prokaryotic (meta)genomic DNA suggests that most bacterial natural product gene clusters are not expressed under common laboratory culture conditions. Silent gene clusters represent a promising resource for natural product discovery and the development of a new generation of therapeutics. Unfortunately, the characterization of molecules encoded by these clusters is hampered owing to our inability to express these gene clusters in the laboratory. To address this bottleneck, we have developed a promoter-engineering platform to transcriptionally activate silent gene clusters in a model heterologous host. Our approach uses yeast homologous recombination, an auxotrophy complementation-based yeast selection system and sequence orthogonal promoter cassettes to exchange all native promoters in silent gene clusters with constitutively active promoters. As part of this platform, we constructed and validated a set of bidirectional promoter cassettes consisting of orthogonal promoter sequences, Streptomyces ribosome binding sites, and yeast selectable marker genes. Using these tools we demonstrate the ability to simultaneously insert multiple promoter cassettes into a gene cluster, thereby expediting the reengineering process. We apply this method to model active and silent gene clusters (rebeccamycin and tetarimycin) and to the silent, cryptic pseudogene-containing, environmental DNA-derived Lzr gene cluster. Complete promoter refactoring and targeted gene exchange in this "dead" cluster led to the discovery of potent indolotryptoline antiproliferative agents, lazarimides A and B. This potentially scalable and cost-effective promoter reengineering platform should streamline the discovery of natural products from silent natural product biosynthetic gene clusters.

A reliable in vitro fruiting system for Armillaria mellea for evaluation of Agrobacterium tumefaciens transformation vectors

Armillaria mellea is a serious pathogen of horticultural and agricultural systems in Europe and North America. The lack of a reliable in vitro fruiting system for heterothallic A. mellea has hindered research and required dependence on intermittently available wild-collected basidiospores of endemic genotypes, necessitating the use of variable genetic material in transformation studies. Here we describe a reliable, reproducible in vitro fruiting method for heterothallic A. mellea from the western US. Isolates and growth conditions were evaluated to determine effective fruiting conditions. Following medium colonisation for 4 weeks, cultures were incubated under warm/bright conditions for 4–6 weeks before incubation in dim/cool conditions. Primordia emerged within 3–4 weeks following a temperature decrease and this was most efficient when coupled with a light reduction. Basidiocarps matured within 3–4 weeks and produced viable basidiospores. Agrobacterium tumefaciens and vectors were evaluated by transformation of in vitro-produced basidiospores and a versatile transformation vector was constructed to simplify promoter and marker gene exchange using homologous recombination in yeast. Fruiting bodies and viable basidiospores of A. mellea have been reliably produced in vitro which, coupled with the enhanced knowledge of suitable A. tumefaciens strains and vectors for transformation, will assist future genetic research into this important pathogen.

Gibson assembly: an easy way to clone potyviral full-length infectious cDNA clones expressing an ectopic VPg.

BackgroundApproaches to simplify and accelerate the construction of full-length infectious cDNA clones for plant potyviruses have been described, based on cloning strategies involving in vitro ligation or homologous recombination in yeast. In the present study, we developed a faster and more efficient in vitro recombination system using Gibson assembly (GA), to engineer a Lettuce mosaic virus (LMV) infectious clone expressing an ectopic mcherry-tagged VPg (Viral protein genome-linked) for in planta subcellular localization of the viral protein in an infection context.MethodsThree overlapping long distance PCR fragments were amplified and assembled in a single-step process based on in vitro recombination (Gibson assembly). The resulting 17.5 kbp recombinant plasmids (LMVmchVPg_Ec) were inoculated by biolistic on lettuce plants and then propagated mechanically on Nicotiana benthamiana. Confocal microscopy was used to analyze the subcellular localization of the ectopically expressed mcherry-VPg fusion protein.ResultsThe Gibson assembly allowed the cloning of the expected plasmids without any deletion. All the inoculated plants displayed symptoms characteristic of LMV infection. The majority of the mcherry fluorescent signal observed using confocal microscopy was located in the nucleus and nucleolus as expected for a potyviral VPg.ConclusionsThis is the first report of the use of the Gibson assembly method to construct full-length infectious cDNA clones of a potyvirus genome. This is also the first description of the ectopic expression of a tagged version of a potyviral VPg without affecting the viability of the recombinant potyvirus.Electronic supplementary materialThe online version of this article (doi:10.1186/s12985-015-0315-3) contains supplementary material, which is available to authorized users.

High-throughput plasmid construction using homologous recombination in yeast: its mechanisms and application to protein production for X-ray crystallography.

Homologous recombination is a system for repairing the broken genomes of living organisms by connecting two DNA strands at their homologous sequences. Today, homologous recombination in yeast is used for plasmid construction as a substitute for traditional methods using restriction enzymes and ligases. This method has various advantages over the traditional method, including flexibility in the position of DNA insertion and ease of manipulation. Recently, the author of this review reported the construction of plasmids by homologous recombination in the methanol-utilizing yeast Pichia pastoris, which is known to be an excellent expression host for secretory proteins and membrane proteins. The method enabled high-throughput construction of expression systems of proteins using P. pastoris; the constructed expression systems were used to investigate the expression conditions of membrane proteins and to perform X-ray crystallography of secretory proteins. This review discusses the mechanisms and applications of homologous recombination, including the production of proteins for X-ray crystallography.

Efficient assembly of full-length infectious clone of Brazilian IBDV isolate by homologous recombination in yeast.

The Infectious Bursal Disease Virus (IBDV) causes immunosuppression in young chickens. Advances in molecular virology and vaccines for IBDV have been achieved by viral reverse genetics (VRG). VRG for IBDV has undergone changes over time, however all strategies used to generate particles of IBDV involves multiple rounds of amplification and need of in vitro ligation and restriction sites. The aim of this research was to build the world's first VRG for IBDV by yeast-based homologous recombination; a more efficient, robust and simple process than cloning by in vitro ligation. The wild type IBDV (Wt-IBDV-Br) was isolated in Brazil and had its genome cloned in pJG-CMV-HDR vector by yeast-based homologous recombination. The clones were transfected into chicken embryo fibroblasts and the recovered virus (IC-IBDV-Br) showed genetic stability and similar phenotype to Wt-IBDV-Br, which were observed by nucleotide sequence, focus size/morphology and replication kinetics, respectively. Thus, IBDV reverse genetics by yeast-based homologous recombination provides tools to IBDV understanding and vaccines/viral vectors development.

Efficient simultaneous excision of multiple selectable marker cassettes using I-SceI-induced double-strand DNA breaks in Saccharomyces cerevisiae.

Large strain construction programs and functional analysis studies are becoming commonplace in Saccharomyces cerevisiae and involve construction of strains that carry multiple selectable marker genes. Extensive strain engineering is, however, severely hampered by the limited number of recyclable marker genes and by the reduced genome stability that occurs upon repeated use of heterologous recombinase-based marker removal methods. The present study proposes an efficient method to recycle multiple markers in S.cerevisiae simultaneously, thereby circumventing shortcomings of existing techniques and substantially accelerating the process of selection-excision. This method relies on artificial generation of double-strand breaks around the selection marker cassette by the meganuclease I-SceI and the subsequent repair of these breaks by the yeast homologous recombination machinery, guided by direct repeats. Simultaneous removal of up to three marker cassettes was achieved with high efficiencies (up to 56%), suggesting that I-SceI-based marker removal has the potential to co-excise an even larger number of markers. This locus- and marker-independent method can be used for both dominant and auxotrophy-complementing marker genes. Seven pDS plasmids carrying various selectable markers, which can be used for PCR-based generation of deletion cassettes suited for I-SceI marker recycling, are described and made available to the scientific community.

Yeast homologous recombination cloning leading to the novel peptides ambactin and xenolindicin.

Heterologous production of GameXPeptide A (1), as well as of the novel peptide natural products ambactin (2) and xenolindicins A-C (3 a-c), was achieved by using the "overlap extension PCR-yeast homologous recombination" (ExRec) method. ExRec cloning is based on the ability of yeast to assemble overlapping DNA fragments into functional plasmids. Here we used this technique to clone a total of 15 biosynthesis gene clusters from Photorhabdus and Xenorhabdus with sizes of up to 45 kb. The structures of the novel compounds 2 and 3 a, which were produced in Escherichia coli, were elucidated by detailed MS and bioinformatics analysis, and additionally confirmed by their chemical synthesis.

A versatile bacterial expression vector designed for single-step cloning of multiple DNA fragments using homologous recombination

Production of recombinant proteins is the starting point for biochemical and biophysical analyses and requires methodology to efficiently proceed from gene sequence to purified protein. While optimized strategies for the efficient cloning of single-gene fragments for bacterial expression is available, efficient multiple DNA fragment cloning still presents a challenge. To facilitate this step, we have developed an efficient cloning strategy based on yeast homologous recombination cloning (YHRC) into the new pET-based bacterial expression vector pSUMO-YHRC. The vector supports cloning for untagged expression as well as fusions to His6-SUMO or His6 tags. We demonstrate that YHRC from single PCR products of 6 independent genes into the vector results in virtually no background. Importantly, in a quantitative assay for functional expression we find that single-step YHRC of 7 DNA fragments can be performed with very high cloning efficiencies. The method and reagents described in this paper significantly simplifies the construction of expression plasmids from multiple DNA fragments, including complex gene fusions, chimeric genes and polycistronic constructs.

An Improved Technique for the Rapid Chemical Characterisation of Bacterial Terpene Cyclases

A derivative of the pET28c(+) expression vector was constructed. It contains a yeast replication system (2μ origin of replication) and a yeast selectable marker (URA3), and can be used for gene cloning in yeast by efficient homologous recombination, and for heterologous expression in E. coli. The vector was used for the expression and chemical characterisation of three bacterial terpene cyclases.

A universal cloning method based on yeast homologous recombination that is simple, efficient, and versatile

Cloning by homologous recombination (HR) in Saccharomyces cerevisiae is an extremely efficient and cost-effective alternative to other methods of recombinant DNA technologies. Unfortunately, it is incompatible with all the various specialized plasmids currently used in microbiology and biomedical research laboratories, and is therefore, not widely adopted. In an effort to dramatically improve the versatility of yeast gap-repair cloning and make it compatible with any DNA plasmid, we demonstrate that by simply including a yeast-cloning cassette (YCC) that contains the 2-micron origin of replication (2μm ori) and the ura3 gene for selection, multiple DNA fragments can be assembled into any DNA vector. We show this has almost unlimited potential by building a variety of plasmid for different uses including: recombinant protein production, epitope tagging, site-directed mutagenesis, and expression of fluorescent fusion proteins. We demonstrate the use in a variety of plasmids for use in microbial systems and even demonstrate it can be used in a vertebrate model. This method is remarkably simple and extremely efficient, plus it provides a significant cost saving over commercially available kits.