X-ray Detector Research Articles

A Deeper Look into eFEDS AGN Candidates in Dwarf Galaxies with Chandra

The ability to accurately discern active massive black holes (BHs) in nearby dwarf galaxies is paramount to understanding the origins and processes of “seed” BHs in the early Universe. We present Chandra X-ray Observatory observations of a sample of three local dwarf galaxies (M * ≤ 3 × 109 M ⊙, z ≤ 0.15) previously identified as candidates for hosting active galactic nuclei (AGN). The galaxies were selected from the NASA-Sloan Atlas with spatially coincident X-ray detections in the eROSITA Final Equatorial Depth Survey. Our new Chandra data reveal three X-ray point sources in two of the target galaxies with luminosities between log(L 2−10 keV [erg s−1]) = 39.1 and 40.4. Our results support the presence of an AGN in these two galaxies and an ultraluminous X-ray source (ULX) in one of them. For the AGNs, we estimate BH masses of M BH ∼ 105−6 M ⊙ and Eddington ratios on the order of ∼10−3.

Improvement of X-ray response of CZT films by post-annealing

CdZnTe (CZT) epitaxial films are promising for X-ray flat panel detectors due to their ability for large area fabrication, high absorption efficiency, and excellent detective quantum efficiency (DQE). However, challenges like image lag, ghosting, and reduced DQE due to long response times and high dark currents persist. This study introduces a novel post-in-situ annealing technique to enhance CZT film sensitivity and transient response. Results show that a brief 20 s annealing treatment increased surface Zn content, raising detector resistivity from 3.5 × 109 Ω·cm to 3.3 × 1010 Ω·cm while reducing leakage current at high voltages. This treatment also significantly reduced surface defects, improving CZT film detectors’ X-ray response time. Moreover, the electrons mobility-lifetime product (μτ)e improved from 2.30 × 10−5 cm2/V to 2.17 × 10−4 cm2/V, indicating enhanced charge carrier dynamics crucial for high-speed X-ray detection. Notably, the X-ray response sensitivity achieved a commendable 126 μC G−1· cm−2 a bias of 30 V. In conclusion, in-situ annealing represents a remarkable step forward in the development of CZT technology for X-ray flat panel imaging, addressing critical issues and potentially broadening its applications in medical and industrial imaging systems.

High performance self-powered photodetection and X-ray detection realized by CH3NH3PbI3 single crystal with planar asymmetric Schottky structure

Organic-inorganic hybrid perovskite CH3NH3PbI3 (MAPbI3) single crystals (SCs) have been widely investigated in photodetection and X-ray detection. However, external electric-field-driven ion migration seriously affect the stability of MAPbI3 SCs based optoelectronic devices. Self-powered device can operate without any external power supply, which is suitable for mitigating the ion migration of MAPbI3 SCs. To realize self-powered MAPbI3 SC based photodetector and X-ray detector, an asymmetric Au/CH3NH3PbI3 SC/Au planar Schottky structure is employed in this work. At 0 V, the self-powered photodetector can achieve the responsivity of 11.1 mA/W at the wavelength of 795 nm, and the sensitivity of the self-powered X-ray detector can reach 477.1 μC Gy-1cm-2 with the detection limit of as low as 140.3 nGy s-1. Moreover, the self-powered optoelectronic device exhibits good stability in both photodetection and X-ray detection. Most importantly, high-quality near-infrared bioimaging and X-ray imaging are successfully realized by the above self-powered optoelectronic device.

Simultaneously achieving high sensitivity, low dark current and low detection limits in anti-perovskites towards X-ray detection

Simultaneously achieving high sensitivity, low dark current and low detection limits in anti-perovskites towards X-ray detection

AutoEncoder Convolutional Neural Network for Pneumonia Detection

This study presents an innovative approach utilising Autoencoder Convolutional Neural Networks (AECNNs) for pneumonia detection in paediatric chest x-rays. The research addresses the complexity of pneumonia, considering diverse causative agents, including bacteria, viruses, and aspiration. Autoencoder Convolutional Neural Networks are employed to enhance anomaly detection by revealing hidden patterns in the data. The evaluation process involves meticulous analysis of the histogram reconstruction error, leading to the establishment of a threshold for anomaly identification. The results demonstrate distinct differences in error magnitudes during testing and training periods, with a threshold providing a tangible criterion for anomaly detection. The study contributes valuable insights into the discriminative capability of Autoencoder Convolutional Neural Networks, with a threshold of 0.0127, in detecting pneumonia in paediatric chest x-rays, emphasising their potential for improving diagnostic precision.

Novel compositionally disordered (Pb,Sr)WO4 single-crystalline scintillation material for X- and gamma-ray scanners

Heavy, bright, and fast single-crystalline scintillation material (Pb,Sr)WO4 was produced and characterized for the first time. Incongruently melted material was obtained by the solution-melt method under the conditions of spontaneous crystallization. It has a density of 7.3 g/cm3 and an effective charge of Zeff = 71. The scintillation kinetics are characterized by a decay constant of 490 ns, while the light yield of scintillation is measured to be 13 500 ph/MeV, both at room temperature. A fabrication of the new low-temperature melting single crystalline tungstate family’s material opens the door for better and cheaper scintillators for X-ray and γ-ray detectors, in particular for radiographic scanners and medical imaging devices.

Enhancing the X-ray Sensitivity of Cs2AgBiBr6 Double Perovskite Single Crystals through Cation Engineering.

Owing to their outstanding optoelectronic properties, halide perovskite (HP) materials have been employed in a wide range of applications, including solar cells, light-emitting devices, and X-ray detectors. Among them, lead-free double HPs are characterized by enhanced stability and reduced toxicity compared with lead-based alternatives. Cs2AgBiBr6, in particular, has emerged as a promising candidate for direct X-ray detection. The detection sensitivity, on the other hand, cannot yet compete with that of lead-containing perovskites. Developing schemes to improve X-ray detection efficiency is critical for reducing radiation exposure in medical imaging applications. Here, we investigate the potential of controlled doping and cation substitution with either lanthanides or small organic cations to improve the X-ray detection performance of Cs2AgBiBr6. Our findings reveal that by growing the perovskite in a slightly Bi-poor and Eu-rich environment, the X-ray sensitivity significantly increases 7-fold (from 17 to 120 μC Gyair -1 cm-2) and simultaneously improves the phototo-dark current ratio (from 2.5 to 29). Additionally, Cs-site substitution with imidazolium remarkably enhances the sensitivity over 10-fold (180 μC Gyair -1 cm-2), and ammonium enhances the phototo-dark current ratio to 37. Terahertz photoconductivity measurements reveal a positive correlation between enhanced X-ray sensitivity and improved charge transport properties (e.g., increased scattering time and, thus, carrier mobility) by doping. This study outlines straightforward strategies for boosting X-ray detection and fundamental photoconductivity in lead-free double HP, with potential implications for broader optoelectronic applications.

Viologen Unlocks Photogenerated Carrier Confinement in Low-Dimensional Perovskites for High-Stability and High-Gain X-ray Detection

Viologen Unlocks Photogenerated Carrier Confinement in Low-Dimensional Perovskites for High-Stability and High-Gain X-ray Detection

Contrast and quantum noise in single-exposure dual-energy thoracic imaging with photon-counting x-ray detectors

Objective.Photon-counting x-ray detectors (PCDs) can produce dual-energy (DE) x-ray images of lung cancer in a single x-ray exposure. It is important to understand the factors that affect contrast, noise and the contrast-to-noise ratio (CNR). This study quantifies the dependence of CNR on tube voltage, energy threshold and patient thickness in single exposure, DE, bone-suppressed thoracic imaging with PCDs, and elucidates how the fundamental processes inherent in x-ray detection by PCDs contribute to CNR degradation.Approach.We modeled the DE CNR for five theoretical PCDs, ranging from an ideal PCD that detects every primary photon in the correct energy bin while rejecting all scattered radiation to a non-ideal PCD that suffers from charge-sharing and electronic noise, and detects scatter. CNR was computed as a function of tube voltage and high energy threshold for average and larger-than-average patients. Model predictions were compared with experimental data extracted from images acquired using a cadmium telluride (CdTe) PCD with two energy bins and analog charge summing for charge-sharing suppression. The imaging phantom simulated attenuation, scatter and contrast in lung nodule imaging. We quantified CNR improvements achievable with anti-correlated noise reduction (ACNR) and measured the range of exposure rates over which pulse pile-up is negligible.Main Results.The realistic model predicted overall trends observed in the experimental data. CNR improvements with ACNR were approximately five-fold, and modeled CNR-enhancements were on average within 10% of experiment. CNR increased modestly (i.e.<20%) when increasing the tube voltage from 90 kV to 130 kV. Optimal energy thresholds ranged from 50 keV to 70 keV across all tube voltages and patient thicknesses with and without ACNR. Quantum efficiency, electronic noise, charge sharing and scatter degraded CNR by ~50%. Charge sharing and scatter had the largest effect on CNR, degrading it by ~30% and ~15% respectively. Dead-time losses were less than 5% for patient exposure rates within the range of clinical exposure rates.Significance.In this study, we (1) employed analytical and computational models to assess the impact of different factors on CNR in single-exposure DE imaging with PCDs, (2) evaluated the accuracy of these models in predicting experimental trends, (3) quantified improvements in CNR achievable through ACNR and (4) determined the range of patient exposure rates at which pulse pile-up can be considered negligible. To the best of our knowledge, this study represents the first systematic investigation of single-exposure DE imaging of lung nodules with PCDs.

Summary Analysis of National Surveillance on Kashin-Beck Disease from 1990 to 2023

ObjectiveTo analyze the epidemiological characteristics and epidemic situation of children with Kashin-Beck disease (KBD) in China, and provide the basis for formulating prevention and control measures. MethodsFixed-point monitoring, moving-point monitoring, and full coverage of monitoring were promoted successively from 1990 to 2023. Some children (7–12 years old) underwent clinical and righthand X-ray examinations every year. According to the KBD diagnosis criteria, clinical and X-ray assessments were used to confirm the diagnosis. ResultsIn 1990, the national KBD detectable rate was 21.01%. X-ray detection decreased to below 10% in 2003 and below 5% in 2007. Between 2010 and 2018, the prevalence of KBD in children was less than 0.4%, which fluctuated at a low level, and has decreased to 0% since 2019. Spatial epidemiological analysis indicated a spatial clustering of adult patients prevalence rate in the KBD areas. ConclusionThe evaluation results of the elimination of KBD in China over the last 5 years showed that all villages in the monitored areas have reached the elimination standard. While the adult KBD patients still need for policy consideration and care.

Ion Leakage Current Control for Polycrystalline Metal Halide Perovskite Direct X-ray Detectors.

Metal halide perovskites have emerged as promising materials for X-ray detection due to their high X-ray attenuation coefficients, defect tolerance, and suitability for large-area, low-temperature fabrication. However, the intrinsic high ion conductivity of these materials presents challenges, such as high dark current density and current drift, which impair the stability and sensitivity of perovskite X-ray detectors. This study introduces an approach to mitigating these issues by incorporating 2,2,3,3,3-pentafluoropropylamine hydrochloride (PFH) into polycrystalline MAPbI3-xClx films using a one-step blade-coating method. PFH aggregates at grain boundaries, raising local vacuum energy levels and passivating surface defects, thereby reducing ion conductivity without affecting electron conductivity. As a result, this approach significantly reduces the dark current and enhances sensitivity, achieving a low detection limit of 14.7 nGyair/s. Additionally, it improves signal stability, consistency, and response speed of the detector. These findings suggest that PFH is a promising additive for advancing the performance and practical application of polycrystalline metal halide perovskite-based X-ray detectors.

Comparison of Faster R-CNN, YOLO, and SSD for Third Molar Angle Detection in Dental Panoramic X-rays.

The use of artificial intelligence algorithms (AI) has gained importance for dental applications in recent years. Analyzing AI information from different sensor data such as images or panoramic radiographs (panoramic X-rays) can help to improve medical decisions and achieve early diagnosis of different dental pathologies. In particular, the use of deep learning (DL) techniques based on convolutional neural networks (CNNs) has obtained promising results in dental applications based on images, in which approaches based on classification, detection, and segmentation are being studied with growing interest. However, there are still several challenges to be tackled, such as the data quality and quantity, the variability among categories, and the analysis of the possible bias and variance associated with each dataset distribution. This study aims to compare the performance of three deep learning object detection models-Faster R-CNN, YOLO V2, and SSD-using different ResNet architectures (ResNet-18, ResNet-50, and ResNet-101) as feature extractors for detecting and classifying third molar angles in panoramic X-rays according to Winter's classification criterion. Each object detection architecture was trained, calibrated, validated, and tested with three different feature extraction CNNs which are ResNet-18, ResNet-50, and ResNet-101, which were the networks that best fit our dataset distribution. Based on such detection networks, we detect four different categories of angles in third molars using panoramic X-rays by using Winter's classification criterion. This criterion characterizes the third molar's position relative to the second molar's longitudinal axis. The detected categories for the third molars are distoangular, vertical, mesioangular, and horizontal. For training, we used a total of 644 panoramic X-rays. The results obtained in the testing dataset reached up to 99% mean average accuracy performance, demonstrating the YOLOV2 obtained higher effectiveness in solving the third molar angle detection problem. These results demonstrate that the use of CNNs for object detection in panoramic radiographs represents a promising solution in dental applications.

Enhancing Optical Properties of Zn-Mn Solid Solution Hybrid Halides for Wide Color Gamut Backlight Displays.

Hybrid metal halides display a range of optical properties and hold promise for various applications such as solid-state lighting, anti-counterfeiting measures, backlight displays, and X-ray detection. The incorporation of zinc into (C13H26N)2MnBr4 aims to enhance its structural rigidity and improve its narrow band green light emission properties. The resulting (C13H26N)2ZnBr4 compound exhibits an identical crystal structure to (C13H26N)2MnBr4, indicating the potential for a solid solution of varying Zn and Mn ratios within this structural framework. (C13H26N)2Zn0.2Mn0.8Br4 exhibits significantly enhanced properties, including a photoluminescence quantum yield of 92%, a minimum full width at half maximum of 43nm, and 85% retention of room temperature emission at 420K. Additionally, crystals of (C13H26N)2ZnCl4 and (C7H18N)2ZnX4 (X = Br, I) are synthesized, with (C7H18N)2ZnBr4 displaying luminescent color changes dependent on excitation. (C7H18N)2Zn0.2Mn0.8Br4 demonstrates reversible phase transitions and alterations in optical properties. A white light-emitting diode utilizing (C13H26N)2Zn0.2Mn0.8Br4 and commercial phosphors exhibited a color gamut of 112.2% of the National Television Standards Committee 1931 Standard. This investigation introduces a stable and highly efficient narrow-band green phosphor suitable for displays.

Tb3+-doped a zero-dimensional all-inorganic metal halide perovskite scintillator Cs2ScCl5·H2O for X-ray imaging

All-inorganic zero-dimensional (0D) metal halide perovskite materials have been widely studied in solid-state lighting due to their unique optical properties. However, there are few researchs on their potential applications in X-ray imaging. Herein, we synthesized an all-inorganic 0D metal halide perovskite scintillator, Cs2ScCl5·H2O:Tb3+, was prepared by using a hydrothermal method. Upon 240 nm excitation, the emission spectrum of Cs2ScCl5·H2O:Tb3+ is primarily composed of characteristic emissions from Tb3+, with the strongest emission peak at 548 nm. Additionally, under X-ray excitation, it exhibits blue light showing an intense emission band centered at 425 nm due to self-trapped (STE) emission, and a rather weaker green emission caused by energy transfer from STE emission to Tb3+ ions. Based on this, a flexible film prepared by using the as-obtained scintillator Cs2ScCl5·H2O:Tb3+ demonstrates real-time X-ray imaging with a resolution of 9.5 lp mm−1. These results suggest the potential application prospect of Cs2ScCl5·H2O:Tb3+ in X-ray detection and imaging.

Enhancement of Electron Transport Characteristics Using MXene-MnFeO3 Nanocomposite Integration with Fullerene Derivatives for the Perovskite-Based Solar Cells and Detectors.

In this study, we prepared a hybrid film incorporating the MnFeO3-decorated conducting two-dimensional (2D) MXene sheet-suspended [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) electron transfer layer (ETL) for the perovskite solar cells (PSCs) and detectors. The incorporation of MXene-MnFeO3 with the PCBM ETL could drive exceptional conducting features for the PSCs. Moreover, the presence of MXene-MnFeO3 facilitated superior charge transfer pathways, thereby enhancing the electron extraction and collection processes. This enhancement was directed to improve the electron mobility within the device, resulting in high photocurrents. The designed interface engineering with the MXene-MnFeO3 nanocomposite-tuned PCBM ETL has produced a remarkable power conversion efficiency of 17.79% ± 0.27. Moreover, X-ray detectors employing PCBM modulated with the MXene-MnFeO3 ETL achieved notable performance metrics including 18.47 μA/cm2 CCD-DCD, 5.53 mA/Gy·cm2 sensitivity, 7.64 × 10-4 cm2/V·s electron mobility, and 1.51 × 1015 cm2/V·s trap density.

Water-Stable and Sensitive X-ray Detectors by Supramolecular Interaction-Enhanced Polyoxometalates.

Polyoxometalates (POMs) have shown prominence in the field of semiconductive materials in recent years. However, electronic applications based on these emerging materials are still in their early stages. Here, a sensitive and water-stable F-PEA-ZnW12 X-ray detector has been designed and constructed for hard X-ray detection and imaging. Supramolecular interactions of H···O bonding, electrostatic, and anion-π interactions not only enable FPEA-ZnW12 excellent water stability but also shorten the distance between [ZnW12O40]6- clusters, which reduces ion migration and dark current simultaneously, resulting in the conductivity of 3.2 × 10-11 S cm-1. Furthermore, the heteropoly blue formed on the surface of the O-FPEA-ZnW12 wafer device promotes the effective separation and extraction of X-ray-induced carriers, enhancing the sensitivity for X-ray detection. The R/O-FEPA-ZnW12 wafer device yields a high sensitivity of 3.1 × 104 μC Gyair-1 cm-2 with the lowest detectable dose rate of 69 nGyair s-1 under 120 kV hard X-ray irradiation. In addition, the O-FPEA-ZnW12 wafer detector exhibits the potential for X-ray detection in water with a sensitivity of 1.0 × 104 μC Gyair-1 cm-2. Moreover, the fabricated POM X-ray detector shows excellent X-ray imaging capability and long-term operational stability without any attenuation of 1 year exposure to air without any encapsulation.

High Sensitivity X-Ray Detectors with Low Degradation Based on Deuterated Halide Perovskite Single Crystals.

Methylammonium lead single crystal (MAPbI3 SC) possesses superior optoelectronic properties and low manufacturing cost, making it an ideal candidate for X-ray detection. However, the ionic migration of the perovskites usually leads to instability, dark current drift, and hysteresis of the detector, limiting their applications in well-established technologies. Here, a series of X-ray detectors of MAPbI3 SCs are reported with different degrees of deuteration (DxMAPbI3, x = 0, 0.15, 0.75, 0.99). By controlling the content of deuterium (D) in organic cations, the sensitivity, detection limits, ion migration, and resistivity of the detector can be controlled, thereby improving its performance. Due to stronger hydrogen bonds (N─D···I), the ion activation energy significantly increases to 886 meV. Consequently, the D0.99MAPbI3 SC detector shows more than five-fold enhancement, achieving a record-high mobility-lifetime (µτ) product of 5.39 × 10-2cm2V-1, with an ultrahigh sensitivity of 2.18 × 106 µC Gy-1 cm-2 under 120keV hard X-ray and a low detection limit of 4.8 nGyair s-1, as well as long-term stability. The study provides a straightforward strategy for constructing ultrasensitive X-ray detection and imaging systems based on perovskite SCs.

Time-dependent instrumental effects in IXPE: Pressure variation and GEM charging inside GPDs

We present the results of two studies conducted on long-term effects of a Gas Pixel Detector (GPD), central point of the X-ray detection of the Imaging X-ray Polarimetry Explorer (IXPE) mission: the pressure variation inside the sealed gas cells of the instrument and the charge build-up in the dielectric layer of the Gas Electron Multiplier (GEM), used as the amplification stage of the detector.

PEAI Surface Treatment for Low Ion Migration and High-Performance FAPbBr3 Single-Crystal X-ray Detectors.

Organometal halide perovskite single crystals (SCs) are the most promising candidates for the next generation of radiation detection materials. However, surface defects severely affect their detection performance and limit further applications. Here, we identified the surface defect types of FAPbBr3 SCs and employed phenethylammonium iodide (PEAI) solution to treat the crystal surface and to investigate their effects on ion migration, photoelectric performance, and X-ray detection performance. Our experimental results demonstrated that the surface defects, such as the metallic Pb and Br vacancies, can be effectively passivated by both the PEAI and the two-dimensional (2D) PEA2PbI4 layers. The PEAI layer can elongate the carrier lifetime, lower the trap density, and suppress ion migration in FAPbBr3 SCs. The 2D PEA2PbI4 layer can form a dense and full surface coverage, suppress ion migration, and lower the dark current of the SCs. The X-ray sensitivity of the PEAI-passivated FAPbBr3 SC detectors is 227.93 μCGyair-1 cm-2, which is an order of magnitude higher than that of the pristine FAPbBr3 SC detectors. This work demonstrates that surface treatment plays a critical role in the crystal quality and the X-ray detection performance of SCs.

Research on picosecond synchronization control between synchrotron radiation X-ray pulse and femtosecond laser pulse on SSRF

The laser-pumped X-ray detection method is a crucial tool for investigating molecular dynamics, allowing researchers to study ultrafast structural changes within materials. This method demands extremely high precision in the synchronization and delay timing between the pump pulse and the probe pulse. In this study, we explored picosecond (ps)-level clock synchronization control between synchrotron radiation X-ray pulses and femtosecond (fs) laser pulses at the BL05U (d-Line) of the Shanghai Synchrotron Radiation Facility (SSRF). Utilizing the X-ray pulses generated by the 40 ps/0.3 mA electron beam bunch from the SSRF and femtosecond laser pulses with high repetition rates and high emission power, we conducted synchronization experiments. A custom-developed picosecond time synchronization control system and a high dynamic range X-ray streak camera with picosecond time resolution were used as detectors, enabling ultra-precise time synchronization monitoring of X-ray and laser pulses. This setup achieves higher time resolution without the need for photodiodes and oscilloscopes. Using the X-ray pulses as a stationary reference frame, we adjusted the clock synchronization control system to delay the laser pulses and measured their relative timing changes with the X-ray streak camera. The experiments demonstrated a time resolution better than 10 ps, providing a foundation for achieving 60 ps time resolution in laser-pumped X-ray detection experiments at the SSRF.