Combined X-ray Absorption Spectroscopy Research Articles

Cuboidal molybdenum sulfur cluster as a platform to construct novel catalyst for propane dehydrogenation

Growing demand of short chain olefins such as propylene for plastic production drives the development of high performing catalysts for propane dehydrogenation (PDH). Here, a confinement strategy originating from metal-sulfur clusters was employed to fabricate defective MoPtSx phase via anchoring by coordinatively unsaturated Al sites present on alumina, followed by reduction under H2 flow at high temperature. This catalyst with a low Pt content exhibits great ability for C–H activation with high intrinsic activity and facile propylene desorption in PDH reaction. More importantly, this catalyst shows excellent stability during long-term tests with both stable conversion and selectivity. Through combined X-ray absorption spectroscopy, electron microscopy and electron paramagnetic resonance measurements it could be affirmed that the isolated and electron-enriched Pt sites as well as their proximity to adjacent sulfur vacancies is vital for the first and second C–H bond activation, and suppressing of C–C cleavage which otherwise lead to coking.

Local Symmetry Deviation from the Average Structure of MnAs Revealed by Pair Distribution Function.

MnAs is an interesting material due to its magnetocaloric properties, which can be utilized in magnetic refrigeration. However, despite major efforts, its magnetic refrigeration performances in the substituted forms could not be improved compared to the parent MnAs phase. Both small and big box modeling of the pair distribution function of MnAs for the local structure description and powder X-ray diffraction for the average structure reveal an inherent local orthorhombic distortion in the hexagonal structure of MnAs. As a result of this distortion, any modification to the hexagonal structure results in an orthorhombic structure and a weaker magnetocaloric performance. This study highlights the importance of studying local distortion in magnetic materials. This is achieved by combining X-ray absorption spectroscopy with total scattering X-ray diffraction.

Dual-Atom P-Co-Dy Charge-Transfer Bridge on Black Phosphorus for Enhanced Photocatalytic CO2 Reduction.

The synergistic effect of rare earth single-atoms and transition metal single-atoms may enable us to achieve some unprecedented performance and characteristics. Here, Co-Dy dual-atoms on black phosphorus with a P-Co-Dy charge-transfer bridge are designed and fabricated as the active center for the CO2 photoreduction reaction. The synergistic effect of Co-Dy on the performance of black phosphorus is studied by combining X-ray absorption spectroscopy, ultrafast spectral analysis, and in situ technology with DFT calculations. The results show that the Co and Dy bimetallic active site can promote charge transfer by the charge transfer bridge from P to Dy, and then to Co, thereby improving the photocatalytic activity of black phosphorus. The performance of catalysts excited at different wavelength light indicates that the 4G11/2/2I15/2/4F9/2→6H15/2 and 4F9/2→6H13/2 emissions of Dy can be absorbed by black phosphorus to improve the utilization of sunlight. The in situ DRIFTS and density functional theory (DFT) calculations are used to investigate the CO2 photoreduction pathway. This work provides an depth insight into the mechanism of dual-atom catalysts with enhanced photocatalytic performance, which helps to design novel atomic photocatalysts with excellent activity for CO2 reduction reactions.

Copper single-site engineering in MOF-808 membranes for improved water treatment.

MOF-808, a metal-organic framework containing Zr6O8 clusters, can serve as a secure anchoring point for stabilizing copper single-sites with redox activity, thus making it a promising candidate for catalytic applications. In this study, we target the incorporation of Cu-MOF-808 into a mixed-matrix membrane for the degradation of tyrosol, an emerging endocrine-disrupting compound commonly found in water sources, through Fenton reactions, developing innovative technologies for water treatment. We successfully demonstrate the effectiveness of this approach by preparing catalytic membranes with minimal metal leaching, which is one of the primary challenges in developing copper-based Fenton heterogeneous catalysts. Furthermore, we utilized advanced synchrotron characterization techniques, combining X-ray absorption spectroscopy and pair distribution function analysis of X-ray total scattering, to provide evidence of the atomic structure of the catalytic copper sites within the membranes. Additionally, we observed the presence of weak interactions between the MOF-808 and the organic polymer, potentially explaining their enhanced stability.

Lead-free Zr-doped ceria ceramics with low permittivity displaying giant electrostriction

Electrostrictors, materials developing mechanical strain proportional to the square of the applied electric field, present many advantages for mechanical actuation as they convert electrical energy into mechanical, but not vice versa. Both high relative permittivity and reliance on Pb as the key component in commercial electrostrictors pose serious practical and health problems. Here we describe a low relative permittivity (<250) ceramic, ZrxCe1-xO2 (x < 0.2), that displays electromechanical properties rivaling those of the best performing electrostrictors: longitudinal electrostriction strain coefficient ~10−16 m2/V2; relaxation frequency ≈ a few kHz; and strain ≥0.02%. Combining X-ray absorption spectroscopy, atomic-level modeling and electromechanical measurements, here we show that electrostriction in ZrxCe1-xO2 is enabled by elastic dipoles produced by anharmonic motion of the smaller isovalent dopant (Zr). Unlike the elastic dipoles in aliovalent doped ceria, which are present even in the absence of an applied elastic or electric field, the elastic dipoles in ZrxCe1-xO2 are formed only under applied anisotropic field. The local descriptors of electrostrictive strain, namely, the cation size mismatch and dynamic anharmonicity, are sufficiently versatile to guide future searches in other polycrystalline solids.

Electronic and Geometric Effects Endow PtRh Jagged Nanowires with Superior Ethanol Oxidation Catalysis.

Complete ethanol oxidation reaction (EOR) in C1 pathway with 12 transferred electrons is highly desirable yet challenging in direct ethanol fuel cells. Herein, PtRh jagged nanowires synthesized via a simple wet-chemical approach exhibit exceptional EOR mass activity of 1.63 A mgPt-1 and specific activity of 4.07mA cm-2 , 3.62-fold and 4.28-folds increments relative to Pt/C, respectively. High proportions of 69.33% and 73.42% of initial activity are also retained after chronoamperometric test (80000 s) and 1500 consecutive potential cycles, respectively. More importantly, it is found that PtRh jagged nanowires possess superb anti-CO poisoning capability. Combining X-ray absorption spectroscopy, X-ray photoelectron spectroscopy as well as density functional theory calculations unveil that the remarkable catalytic activity and CO tolerance stem from both the Rh-induced electronic effect and geometric effect (manifested by shortened Pt─Pt bond length and shrinkage of lattice constants), which facilitates EOR catalysis in C1 pathway and improves reaction kinetics by reducing energy barriers of rate-determining steps (such as *CO → *COOH). The C1 pathway efficiency of PtRh jagged nanowires is further verified by the high intensity of CO2 relative to CH3 COOH/CH3 CHO in infrared reflection absorption spectroscopy.

Methyl radical chemistry in non-oxidative methane activation over metal single sites

Molybdenum supported on zeolites has been extensively studied as a catalyst for methane dehydroaromatization. Despite significant progress, the actual intermediates and particularly the first C-C bond formation have not yet been elucidated. Herein we report evolution of methyl radicals during non-oxidative methane activation over molybdenum single sites, which leads selectively to value-added chemicals. Operando X-ray absorption spectroscopy and online synchrotron vacuum ultraviolet photoionization mass spectroscopy in combination with electron microscopy and density functional theory calculations reveal the essential role of molybdenum single sites in the generation of methyl radicals and that the formation rate of methyl radicals is linearly correlated with the number of molybdenum single sites. Methyl radicals transform to ethane in the gas phase, which readily dehydrogenates to ethylene in the absence of zeolites. This is essentially similar to the reaction pathway over the previously reported SiO2 lattice-confined single site iron catalyst. However, the availability of a zeolite, either in a physical mixture or as a support, directs the subsequent reaction pathway towards aromatization within the zeolite confined pores, resulting in benzene as the dominant hydrocarbon product. The findings reveal that methyl radical chemistry could be a general feature for metal single site catalysis regardless of the support (either zeolites MCM-22 and ZSM-5 or SiO2) whereas the reaction over aggregated molybdenum carbide nanoparticles likely facilitates carbon deposition through surface C-C coupling. These findings allow furthering the fundamental insights into non-oxidative methane conversion to value-added chemicals.

Cu4S Cluster in "0-Hole" and "1-Hole" States: Geometric and Electronic Structure Variations for the Active CuZ* Site of N2O Reductase.

The active site of nitrous oxide reductase (N2OR), a key enzyme in denitrification, features a unique μ4-sulfido-bridged tetranuclear Cu cluster (the so-called CuZ or CuZ* site). Details of the catalytic mechanism have remained under debate and, to date, synthetic model complexes of the CuZ*/CuZ sites are extremely rare due to the difficulty in building the unique {Cu4(μ4-S)} core structure. Herein, we report the synthesis and characterization of [Cu4(μ4-S)]n+ (n = 2, 2; n = 3, 3) clusters, supported by a macrocyclic {py2NHC4} ligand (py = pyridine, NHC = N-heterocyclic carbene), in both their 0-hole (2) and 1-hole (3) states, thus mimicking the two active states of the CuZ* site during enzymatic N2O reduction. Structural and electronic properties of these {Cu4(μ4-S)} clusters are elucidated by employing multiple methods, including X-ray diffraction (XRD), nuclear magnetic resonance (NMR), UV/vis, electron paramagnetic resonance (EPR), Cu/S K-edge X-ray emission spectroscopy (XES), and Cu K-edge X-ray absorption spectroscopy (XAS) in combination with time-dependent density functional theory (TD-DFT) calculations. A significant geometry change of the {Cu4(μ4-S)} core occurs upon oxidation from 2 (τ4(S) = 0.46, seesaw) to 3 (τ4(S) = 0.03, square planar), which has not been observed so far for the biological CuZ(*) site and is unprecedented for known model complexes. The single electron of the 1-hole species 3 is predominantly delocalized over two opposite Cu ions via the central S atom, mediated by a π/π superexchange pathway. Cu K-edge XAS and Cu/S K-edge XES corroborate a mixed Cu/S-based oxidation event in which the lowest unoccupied molecular orbital (LUMO) has a significant S-character. Furthermore, preliminary reactivity studies evidence a nucleophilic character of the central μ4-S in the fully reduced 0-hole state.

Unraveling the interlayer and intralayer coupling in two-dimensional layered MoS[formula omitted] by X-ray absorption spectroscopy and ab initio molecular dynamics simulations

Understanding interlayer and intralayer coupling in two-dimensional layered materials (2DLMs) has fundamental and technological importance for their large-scale production, engineering heterostructures, and development of flexible and transparent electronics. At the same time, the quantification of weak interlayer interactions in 2DMLs is a challenging task, especially, from the experimental point of view. Herein, we demonstrate that the use of X-ray absorption spectroscopy in combination with reverse Monte Carlo (RMC) and ab initio molecular dynamics (AIMD) simulations can provide useful information on both interlayer and intralayer coupling in 2DLM 2Hc-MoS2. The analysis of the low-temperature (10–300 K) Mo K-edge extended X-ray absorption fine structure (EXAFS) using RMC simulations allows for obtaining information on the means-squared relative displacements σ2 for nearest and distant Mo–S and Mo–Mo atom pairs. This information allowed us further to determine the strength of the interlayer and intralayer interactions in terms of the characteristic Einstein frequencies ωE and the effective force constants κ for the nearest ten coordination shells around molybdenum. The studied temperature range was extended up to 1200 K employing AIMD simulations which were validated at 300 K using the EXAFS data. Both RMC and AIMD results provide evidence of the reduction of correlation in thermal motion between distant atoms and suggest strong anisotropy of atom thermal vibrations within the plane of the layers and in the orthogonal direction.

Orbital selective coupling in CeRh3B2 : Coexistence of high Curie and high Kondo temperatures

We investigated the electronic structure of the enigmatic CeRh$_3$B$_2$ using resonant inelastic scattering and x-ray absorption spectroscopy in combination with $ab$ $initio$ density functional calculations. We find that the Rh 4$d$ states are irrelevant for the high-temperature ferromagnetism and the Kondo effect. We also find that the Ce 4$f$ crystal-field strength is too small to explain the strong reduction of the Ce magnetic moment. The data reveal instead the presence of two different active Ce 4$f$ orbitals, with each coupling selectively to different bands in CeRh$_3$B$_2$. The inter-site hybridization of the |J=5/2,Jz=+/-1/2> crystal-field state and Ce 5$d$ band combined with the intra-site Ce 4$f$-5$d$ exchange creates the strong ferromagnetism, while hybridization between the |J=5/2,Jz=+/-5/2> and the B $sp$ in the $ab$-plane contributes to the Kondo interaction which causes the moment reduction. This orbital selective coupling explains the unique and seemingly contradictory properties of CeRh$_3$B$_2$.

Combining XAS with XRD for elucidating the complex structural behavior of pre-lithiated SnO anode materials for Lithium-ion batteries

Tin-based oxides anode materials have been widely studied to aim at higher performance for next-generation lithium-ion batteries (LIBs) due to the high theoretical specific capacity of Sn (reaching 994 mAh.g−1). However, the volume variation of Sn/LixSn transformation changes during the lithiation prevents a common application of these materials in nowadays used batteries. To understand the lithiation pathways, in this work, the degree of pre-lithiation of tin-base anode materials was investigated via combined X-ray diffraction (XRD) and X-ray absorption spectroscopy (XAS) techniques. The experimental results confirm the formation of LiSn, Li7Sn3, Li5Sn2, Li13Sn5, Li7Sn2, and Li22Sn5 phases. The degree of pre-lithiation plays a critical role in determining the electrochemical characteristics of LixSn alloy. This work provided useful and new insights in the future development of advanced anode materials for LIBs.

Extracting structural insights from soft X-ray scattering of biological assemblies.

Resonant soft X-ray scattering (RSoXS), a technique that combines X-ray absorption spectroscopy and X-ray scattering, can probe the nano- and meso-scale structure of biological assemblies with chemical specificity. RSoXS experiments yield scattering data collected at several photon energies, for example across an elemental absorption edge of interest. Collecting a near-edge X-ray absorption fine structure (NEXAFS) spectrum complements RSoXS experiments and determines X-ray energies that are best suited for RSoXS measurements. The analysis of RSoXS data is similar in many ways to analysis of small angle X-ray scattering using hard X-rays, with an added dimension that includes an X-ray energy dependence. This chapter discusses procedures for predicting scattering contrast and thereby identifying energies suitable for RSoXS measurements using NEXAFS spectra, analyses of 2D RSoXS images through integration into 1D profiles, and strategies for elucidating the origin of RSoXS scattering features. It also discusses existing and potential methods for interpretation of RSoXS data to gain detailed structural insights into biological systems.

Transition from monolayer-thick 2D to 3D nano-clusters on α-Al2O3(0001).

This paper reports on the long-standing puzzle of the atomic structure of the Ag/α-Al2O3(0001) interface by combining X-ray absorption spectroscopy, to determine Ag local environment [i.e. average Ag-Ag (dAg-Ag) and Ag-O (dAg-O) interatomic distances and Ag coordination numbers (CN)], and numerical simulations on nanometric-sized particles. The experimental key was the capability of a structural study of clusters involving only a few atoms. The concomitant decrease of dAg-Ag and CN with decreasing cluster size provides unambiguous fingerprints for the dimensionality of the Ag clusters in the subnanometric regime leading to a series of unexpected results regarding the size-dependent interface structures. At low coverage, Ag atoms sit on surface Al sites to form buckled monolayer-thick islands associated with a Ag-Ag distance (2.75 Å) which fits the alumina lattice. Upon increasing Ag coverage, as 3D clusters appear, the Ag interface atoms tend to leave Al sites to sit atop O atoms as dAg-Ag increases. The then highlighted size-dependent evolution, is built on structural models which seemed so far contradictory in a static vision of the interface. Theory generalizes the case as it predicts the existence of alumina-supported 2D clusters of Pd and Pt at small coverage and a similar 2D-3D transition upon increasing the size. The structural transformation from 2D Ag clusters to macroscopic 3D islands is accompanied by a noticeable reduction of adhesion energy at the Ag/α-Al2O3(0001) interface.

Identification of carbon location in p-type GaN: Synchrotron x-ray absorption spectroscopy and theory

Identifying atomic configurations of impurities in semiconductors is of fundamental interest and practical importance in designing electronic and optoelectronic devices. C impurity acting as one of the most common impurities in GaN, it is believed for a long time that it substitutes at Ga site forming CGa with +1 charge-state in p-type GaN, while it substitutes at N site forming CN with -1 charge-state in n-type GaN. However, by combining x-ray absorption spectroscopy and first-principles simulations, we observed that C is mainly occupying the N site rather than the Ga one in p-GaN. We further reveal that this is due to an H-induced EF-tuning effect. During growth, the existing H can passivate Mg dopants and upshifts the EF to the upper region of bandgap, leading to the CN formation. After the p-type activation by annealing out H, although the EF is pushed back close to the valence band maximum, whereas the extremely large kinetic barrier can prevent the migration of C from the metastable CN site to ground-state CGa site, hence stabilizing the CN configuration. Additionally, the CN with neutral charge-state (CN0) in the p-GaN is further observed. Therefore, the real C-related hole-killer in p-type GaN could be CN rather than the commonly expected CGa. Our work not only offers the unambiguous evidence for the C defect formation in p-GaN but also contributes significantly to an in-depth understanding of the C-related hole-killers and their critical role on electrical and optoelectrical properties of p-GaN and even p-AlGaN.

Solvation structure of the Hg(NO3)2 and Hg(TfO)2 salts in dilute aqueous and methanol solutions: An insight into the Hg2+ coordination chemistry

A synergic approach combining X-ray absorption spectroscopy (XAS) and Molecular Dynamics (MD) has been used to investigate the solvation properties of dilute aqueous and methanol solutions of the Hg(NO3)2 and Hg(TfO)2 (where TfO−=trifluoromethanesulfonate or triflate) salts. A new Lennard-Jones potential has been developed to be used in classical MD simulations of Hg2+-containing systems by refining the force-field parameters to reproduce the Hg2+ ion coordination in water in agreement with the XAS data. A different behavior of the Hg2+ ion in water and methanol has been highlighted by the analysis of the MD simulations carried out with the newly developed interaction potential: in aqueous solutions of the Hg(NO3)2 and Hg(TfO)2 salts, the Hg2+ first coordination shell is composed only of water molecules, while in methanol solutions of the same salts the Hg2+ cation coordinates both counterions and methanol molecules in its first solvation sphere. The MD results have been confirmed by comparison with the Hg L3-edge XAS experimental data. Independently of the formation of ion pairs with the counterions, the Hg2+ ion in solution tends to form heptacoordinated first shell complexes, with an arrangement of the ligands depending on the nature of the solvent: in water a 7-fold cluster of water molecules in a C2 symmetry is found, while in methanol the Hg2+ solvation shell is composed of both counterions and methanol molecules, with oxygen atoms coordinating Hg2+ arranged in a distorted pentagonal bipyramid geometry. These findings represent a significant step forward in the understanding of the solvation chemistry of the Hg2+ ion, which is fundamental to improve the efficiency of mercury removal procedures that are crucial to the safety of water resources.

Interplay between structural, magnetic, and electronic states in the pyrochlore iridate Eu2Ir2O7

We address the concomitant metal-insulator transition (MIT) and antiferromagnetic ordering in the novel pyrochlore iridate Eu2Ir2O7 by combining x-ray absorption spectroscopy, x-ray and neutron diffractions and density functional theory (DFT) based calculations. The temperature dependent powder x-ray diffraction clearly rules out any change in the lattice symmetry below the MIT, nevertheless a clear anomaly in the Ir-O-Ir bond angle and Ir-O bond length is evident at the onset of MIT. From the x-ray absorption near edge structure (XANES) spectroscopic study of Ir-L3 and L2 edges, the effective spin-orbit coupling is found to be intermediate, at least quite far from the strong atomic spin-orbit coupling limit. Powder neutron diffraction measurement is in line with an all-in-all-out magnetic structure of the Ir-tetrahedra in this compound, which is quite common among rare-earth pyrochlore iridates. The sharp change in the Ir-O-Ir bond angle around the MIT possibly arises from the exchange striction mechanism, which favors an enhanced electron correlation via weakening of Ir-Ir orbital overlap and an insulating phase below TMI . The theoretical calculations indicate an insulating state for shorter bond angle validating the experimental observation. Our DFT calculations show a possibility of intriguing topological phase below a critical value of the Ir-O distance, which is shorter than the experimentally observed bond length. Therefore, a topological state may be realized in bulk Eu2Ir2O7 sample if the Ir-O bond length can be reduced by the application of sufficient external pressure.

Role of the Metal Atom in a Carbon-Based Single-Atom Electrocatalyst for LiS Redox Reactions.

Carbon-based single metal atom catalysts (SACs) are being extensively investigated to improve the kinetics of the Li-S redox reaction, which is greatly important for batteries with cell-level energy densities >500Whkg-1 .However, there are contradictory reports regarding the electrocatalytic activities of the different metal atoms and the role of the metal atom in LiS chemistry still remains unclear. This is due to the complex relationship between the catalytic behavior and the structure of carbon-based SACs. Here, the catalytic behavior and active-site geometry, oxidation state, and the electronic structure of different metal centers (Fe/Co/Ni) embedded in nitrogen-doped graphene, and having similar physicochemical characteristics, are studied. Combining X-ray absorption spectroscopy, density functional theory calculations, and electrochemical analysis, it is revealed that the coordination-geometry and oxidation state of the metal atoms are modified when interacting with sulfur species. This interaction is strongly dependent on the hybridization of metal 3d and S p-orbitals. A moderate hybridization with the Fermi level crossing the metal 3d band is more favorable for LiS redox reactions. This study thus provides a fundamental understanding of how metal atoms in SACs impact LiS redox behavior and offers new guidelines to develop highly active catalytic materials for high-performance LiS batteries.

In Situ XAS Investigation of K4Fe(CN)6·xH2O and K3Fe(CN)6 Redox Activity in Solid-State Supercapacitors

We examined the redox activity of commercially obtained K4Fe(CN)6·xH2O and K3Fe(CN)6 incorporated in an asymmetric solid-state supercapacitors (SCs) using combined cyclic voltammetry and X-ray absorption spectroscopy (XAS) under in situ conditions. The cyclic voltammetry measurements were done at 10 mV s−1 between −2 and + 2 V while the XAS measurements were conducted in transmission mode at the Advanced Photon Source. The asymmetric SCs were constructed with one electrode containing activated carbon (AC) and another electrode containing a mixture of AC and K4Fe(CN)6·xH2O or K3Fe(CN)6 sandwiched between a PVDF/LiTFS membrane. We show that K4Fe(CN)6·xH2O is stable while Fe(III) in K3Fe(CN)6 is reduced to Fe(II) as a result of the electrode synthesis procedures. The complete reduction of Fe(III) to Fe(II) in K3Fe(CN)6 during the synthesis procedures is believed to be due to the interaction with lithium from the LiTFS salt and the formation of LiK3Fe(CN)6. Based on the energy shifts in the XANES data, about 50% of the Fe in both K4Fe(CN)6·xH2O and the reduced form of K3Fe(CN)6 is oxidized and reduced between Fe(III) and Fe(II) during electrochemical cycling between −2 and +2 V. The associated changes in the coordination distances and disorders of the first (Fe-C) and second (Fe-N) shells were also quantified and discussed.

Fundamental electronic changes upon intersystem crossing in large aromatic photosensitizers: free base 5,10,15,20-tetrakis(4-carboxylatophenyl)porphyrin.

Free base 5,10,15,20-tetrakis(4-carboxylatophenyl)porphyrin stands for the class of powerful porphyrin photosensitizers for singlet oxygen generation and light-harvesting. The atomic level selectivity of dynamic UV pump – N K-edge probe X-ray absorption spectroscopy in combination with time-dependent density functional theory (TD-DFT) gives direct access to the crucial excited molecular states within the unusual relaxation pathway. The efficient intersystem crossing, that is El-Sayed forbidden and not facilitated by a heavy atom is confirmed to be the result of the long singlet excited state lifetime (Qx 4.9 ns) and thermal effects. Overall, the interplay of stabilization by conservation of angular momenta and vibronic relaxation drive the de-excitation in these chromophores.

Covalency between the uranyl ion and dithiophosphinate by sulfur K-edge X-ray absorption spectroscopy and density functional theory.

The dithiophosphinic acids (HS2PR2) have been used for the selective separation of trivalent actinides (AnIII) from lanthanides (LnIII) over the past decades. The substituents on the dithiophosphinic acids dramatically impact the separation performance, but the mechanism is still open for debate. In this work, two dithiophosphinic acids with significantly different AnIII/LnIII separation performance, i.e. diphenyl dithiophosphinic acid (HS2PPh2) and bis(ortho-trifluoromethylphenyl) dithiophosphinic acid [HS2P(o-CF3C6H4)2], are employed to understand the substituent effect on the bonding covalency between the S2PR2- anions (R = Ph and o-CF3C6H4) and the uranyl ion by sulfur K-edge X-ray absorption spectroscopy (XAS) in combination with density functional theory calculations. The two UO2(S2PR2)(EtOH) complexes display similar XAS spectra, in which the first pre-edge feature with an intensity of 0.16 is entirely attributed to the transitions from S 1s orbitals to the unoccupied molecular orbitals due to the mixing between U 5f and S 3p orbitals. The Mulliken population analysis indicates that the amount of \% S 3p character inthese orbitals is essentially identical for the UO2(S2PPh2)2(EtOH) and UO2[S2P(o-CF3C6H4)2]2(EtOH) complexes, which is lower than that in the U 6d-based orbitals. The essentially identical covalency in U-S bonds for the two UO2(S2PR2)2(EtOH) complexes are contradictory to the significantly different AnIII/LnIII separation performance of the two dithiophosphinic acids, thus the covalency seems to be unable to account for substituent effects in the AnIII/LnIII separation by the dithiophosphinic acids. The results in this work provide valuable insight into the understanding of the mechanism in the AnIII/LnIII separation by the dithiophosphinic acids.