Wide Field Of View Research Articles

Ultra-Widefield Swept-Source Optical Coherence Tomography Angiography in the Assessment of Choroidal Changes in Young Adults With Myopia.

To evaluate choroidal changes in young adults with myopia using ultra-widefield swept-source optical coherence tomography angiography (SS-OCTA). This study enrolled 105 eyes of 105 participants who underwent SS-OCTA imaging (24 mm × 20 mm) centered on the fovea. Eyes were categorized as low myopia, moderate myopia, or high myopia. Choroidal thickness, choroidal capillary plexus (CCP) vessel density, and choroidal Sattler's and Haller's layer (CSHL) vessel density were analyzed in nine grids using built-in angiography analysis software. A significant decrease in choroidal thickness was found in most grids (P < 0.01) in high myopia. The CSHL vessel density also showed a significant decrease in most grids (P < 0.05) in high myopia. Choroidal thickness was negatively correlated with axial length in most grids (P < 0.05). Choroidal thinning was most evident in the macular grid (β = -22.55, P < 0.001). CSHL vessel density was negatively correlated with axial length in most grids (P < 0.05). Choroidal changes could be quantified using ultra-widefield SS-OCTA. Choroidal thinning with increasing axial length indicated regional differences in eyes with myopia, which were most evident in the macular area. Decreased CSHL vessel density with increasing axial length also indicated regional differences in eyes with myopia. This study explored choroidal changes with a wider field of view than has been currently available.

Design of Airborne Large Aperture Infrared Optical System Based on Monocentric Lens.

Conventional reconnaissance camera systems have been flown on manned aircraft, where the weight, size, and power requirements are not stringent. However, today, these parameters are important for unmanned aerial vehicles (UAVs). This article provides a solution to the design of airborne large aperture infrared optical systems, based on a monocentric lens that can meet the strict criteria of aerial reconnaissance UAVs for a wide field of view (FOV) and lightness of airborne electro-optical pod cameras. A monocentric lens has a curved image plane, consisting of an array of microsensors, which can provide an image with 368 megapixels over a 100° FOV. We obtained the initial structure of a five-glass (5GS) asymmetric monocentric lens with an air gap, using ray-tracing and global optimization algorithms. According to the design results, the ground sampling distance (GSD) of the system is 0.33 m at 3000 m altitude. The full-field modulation transfer function (MTF) value of the system is more than 0.4 at a Nyquist frequency of 70 lp/mm. We present a primary thermal control method, and the image quality was steady throughout the operating temperature range. This compactness and simple structure fulfill the needs of uncrewed airborne lenses. This work may facilitate the practical application of monocentric lens in UAVs.

Lateral transperitoneal laparoscopic management for paragangliomas in para-aortic position: Surgical experience from case reports of three patients

Paragangliomas are a type of neuroendocrine tumour with catecholamine secretion outside of the adrenal medulla. These tumours are frequently found in the para-aortic region, which makes them difficult to manage laparoscopically. We herein present a case report of three patients with paragangliomas in a difficult superior para-aortic position. All cases had symptoms of catecholamine release with uncontrolled episodic hypertension and had their tumours successfully removed by transperitoneal laparoscopic management. We have found this method to be a suitable approach because it reveals a wide surgical field and a view over all organs, especially blood vessels around the tumour. Although blood and urine dopamine and noradrenaline levels were not measured postoperatively, all three patients were discharged without complication and they did not display any more clinical symptoms. Lateral transperitoneal laparoscopic surgery provided a wide field of view, which clearly revealed the tumour and surrounding components indicating it is one of the safest and most effective approaches, especially for paragangliomas adjacent to large blood vessels.

Effectiveness Test of iOptron Cube-G Telescope for Hilal Observation

The use of robotic telescopes in the practice of observing the Hilal in Indonesia is quite widespread. One type of telescope that is widely used by observers is the iOptron Cube. Telescopes with an alt-azimuth mounting type with GPS features can be used easily by observers who observes Hilal on a portable basis. The effectiveness of using this telescope needs to be studied more deeply because pointing accuracy and alt-azimuth tracking mounting capabilities require good computational ability to obtain the expected results. After being tested with two configurations (narrow and wide field of view) and seeing the various supporting features embedded in this telescope, it can be concluded that the iOptron Cube is quite effective for observing Hilal.

The chemical compositions of multiple stellar populations in the globular cluster NGC 2808

ABSTRACT Pseudo two-colour diagrams or Chromosome maps (ChM) indicate that NGC 2808 host five different stellar populations. The existing ChMs have been derived by the Hubble Space Telescope photometry, and comprise of stars in a small field of view around the cluster centre. To overcome these limitations, we built a ChM with U, B, I photometry from ground-based facilities that disentangle the multiple stellar populations of NGC 2808 over a wider field of view. We used spectra collected by GIRAFFE@VLT in a sample of 70 red giant branch and seven asymptotic giant branch (AGB) stars to infer the abundances of C, N, O, Al, Fe, and Ni, which combined with literature data for other elements (Li, Na, Mg, Si, Ca, Sc, Ti, Cr, and Mn), and together with both the classical and the new ground-based ChMs, provide the most complete chemical characterization of the stellar populations in NGC 2808 available to date. As typical of the multiple population phenomenon in globular clusters, the light elements vary from one stellar population to another; whereas the iron peak elements show negligible variation between the different populations (at a level of ≲0.10 dex). Our AGB stars are also characterized by the chemical variations associated with the presence of multiple populations, confirming that this phase of stellar evolution is affected by the phenomenon as well. Intriguingly, we detected one extreme O-poor AGB star (consistent with a high He abundance), challenging stellar evolution models that suggest that highly He-enriched stars should avoid the AGB phase and evolve as AGB-manqué star.

A Dynamic Dual Reflector Antenna for 4-D Synthetic Aperture Radar Imaging Achieving a 0.4° Pencil Beam at 77 GHz

All existing state-of-the-art high-resolution millimeter-wave imaging systems experience a tradeoff between image acquisition time and transceiver array complexity. The proposed dual-reflector antenna breaks this tradeoff by drastically reducing the array formation time while maintaining the relative simplicity that comes with using a single transceiver element. It consists of a dual-mode horn feed, a rotating ellipsoidal subreflector, and a conic main reflector. The rotating subreflector creates a virtual phase center that rotates about an axis to produce a synthetic circular array with a diameter of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$120\lambda $ </tex-math></inline-formula> . The main reflector redirects the beams from each of these virtual phase centers to overlap and illuminate the scene over a wide field of view (FOV). Two cases are simulated, one with a 14° FOV and another with 25° FOV in both azimuth and elevation. The former case is experimentally verified and achieves a measured half-power beamwidth of 0.4° over the entire scan range. The proposed system can reduce the image acquisition time to the order of milliseconds/seconds, which makes real-time SAR imaging a practical alternative to multiple-input–multiple-output (MIMO) and phased arrays at millimeter-wave and sub-millimeter-wave frequencies.

Development of 150 Mpixel lens-coupled X-ray imaging detectors equipped with diffusion-free transparent scintillators based on an analytical optimization approach

X-ray microscopy experiments at synchrotron radiation facilities generally require X-ray imaging detectors with high spatial resolution and a wide field of view. For such purposes, lens-coupled X-ray imaging detectors are widely used. The SPring-8 X-ray microscopy beamlines require detectors that satisfy a 200 nm spatial resolution and over 50 mm field of view. We have carried out a systematic optical design based on an analytical optimization approach and elucidated that a set of five detector systems is able to meet these requirements. Their objective lenses have magnifications of 20x, 7x, 5.2x, 3.5x, and 1x. All the systems are designed to be equipped with 150 Mpixel CMOS image sensors. To verify our optimization approach, we have built a detector system with a magnification of 3.5x. The detector has successfully resolved 1.2 µm line-and-space patterns for the entire field of view, which is close to the optical diffraction-limited resolving power of 1.0 µm line-and-space patterns.

Cross-Modal 360° Depth Completion and Reconstruction for Large-Scale Indoor Environment

In a large-scale epidemic, reducing direct contact among medical personnel, attendants and patients has become a necessary means of epidemic prevention and control. Intelligent vehicles and mobile robots in the hospital environment, such as disinfection vehicles, logistics vehicles, nursing robots, and guiding robots, play an important role in improving the operational efficiency of the medical system and promoting epidemic prevention and governance. Powerful capabilities of environmental spatial perception and reconstruction are the keys to accurate localization, navigation, and obstacle avoidance for intelligent vehicles and autonomous robots in such operations. Omnidirectional perception is becoming increasingly important and proliferative in autonomous vehicles and robots since its wide field of view significantly enhances the perception ability. However, the lack of dense and accurate 360° depth datasets has brought the challenge to the omnidirectional perception. In this paper, we propose a depth-sensing and reconstruction system to address this challenge in the large-scale indoor environment. First, we design an omnidirectional depth completion convolutional neural network model, in which a spherical normalized convolutional and the unit sphere area-based loss are introduced to extract features from cross-modal omnidirectional input with unequal sparsity and deal with the imbalanced data distribution and distortion in the panoramic input. In addition, we present a 3D reconstruction system by integrating our depth completion into omnidirectional localization and dense mapping. We evaluate our method on 360D large-scale indoor datasets and real-world sequences of a challenging hospital scene. Extensive experiments show that the proposed method outperforms the other state-of-the-art (SoTA) approaches in terms of depth completion and 3D reconstruction.

Achromatic and wide field of view metalens based on the harmonic diffraction and a quadratic phase.

Although metalens has made breakthroughs in various imaging applications due to its ultrathin, lightweight, and multi-functionality, simultaneously achieving wide field of view (WFOV) and achromatic imaging remains a challenge. Here, we demonstrate a harmonic metalens with a quadratic phase profile that enables WFOV imaging and achromatic imaging at certain discrete wavelengths. First, we quantitatively explain why the quadratic phase enables WFOV imaging using its Fourier Transform (FT). Second, we derive the complex-amplitude transmittance formula of a harmonic metalens. The derived formula integrating with the Angular Spectrum theory can calculate the transmitted field distributions of a harmonic metalens. Third, we propose an achromatic WFOV metalens based on the harmonic diffraction and quadratic phase at a large numerical aperture (NA=0.76), which enables achromatic imaging at wavelengths λ = 600 nm, 1200 nm with a wide field of view (FOV) of 100°. The proposed scheme will undoubtedly expand the applications of metalens in the imaging area.

Correction performance uniformity on ground-layer adaptive optics

ABSTRACTGround-layer adaptive optics (GLAO) is generally used to improve the seeing for large-aperture ground-based optical telescopes across a wide field of view with uniform imaging quality. In this paper, a new criterion, which is defined as the weighted sum of the mean and mean-square-error values of the full width at half-maximum of the field-dependent point spread function of the image over the whole field of view, is proposed to evaluate GLAO performance uniformity. An analytic model of the GLAO-corrected point spread function based on spatial filtering methods is used to investigate the uniformity and image quality over the whole field of view for different guide-star layouts, telescope apertures, numbers of actuators for the deformable mirror, and turbulence profiles. Simulations are performed on the GLAO configurations for the 1-m New Vacuum Solar Telescope at Fuxian Solar Observatory. The results show that, compared with that of the classical evaluation, the correction uniformity improves by 63 per cent, with the resolution sacrificing only 5 per cent for a measured turbulence profile at Fuxian Solar Observatory. Furthermore, this criterion is applied to various requirements, and some critical system parameters are suggested for the wide field-of-view GLAO.

High resolution, wide field optical imaging of macaque visual cortex with a curved detector

Objective. Cortical activity can be recorded using a variety of tools, ranging in scale from the single neuron (microscopic) to the whole brain (macroscopic). There is usually a trade-off between scale and resolution; optical imaging techniques, with their high spatio-temporal resolution and wide field of view, are best suited to study brain activity at the mesoscale. Optical imaging of cortical areas is however in practice limited by the curvature of the brain, which causes the image quality to deteriorate significantly away from the center of the image. Approach. To address this issue and harness the full potential of optical cortical imaging techniques, we developed a new wide-field optical imaging system adapted to the macaque brain. Our system is composed of a curved detector, an aspherical lens and a ring composed of light emitting diodes providing uniform illumination at wavelengths relevant for the different optical imaging methods, including intrinsic and fluorescence imaging. Main results. The system was characterized and compared with the standard macroscope used for cortical imaging, and a three-fold increase of the area in focus was measured as well as a four-fold increase in the evenness of the optical quality in vivo. Significance. This new instrument, which is to the best of our knowledge the first use of a curved detector for cortical imaging, should facilitate the observation of wide mesoscale phenomena such as dynamic propagating waves within and between cortical maps, which are otherwise difficult to observe due to technical limitations of the currently available recording tools.

Pupil-Aware Holography

Holographic displays promise to deliver unprecedented display capabilities in augmented reality applications, featuring a wide field of view, wide color gamut, spatial resolution, and depth cues all in a compact form factor. While emerging holographic display approaches have been successful in achieving large étendue and high image quality as seen by a camera, the large étendue also reveals a problem that makes existing displays impractical: the sampling of the holographic field by the eye pupil. Existing methods have not investigated this issue due to the lack of displays with large enough étendue, and, as such, they suffer from severe artifacts with varying eye pupil size and location. We show that the holographic field as sampled by the eye pupil is highly varying for existing display setups, and we propose pupil-aware holography that maximizes the perceptual image quality irrespective of the size, location, and orientation of the eye pupil in a near-eye holographic display. We validate the proposed approach both in simulations and on a prototype holographic display and show that our method eliminates severe artifacts and significantly outperforms existing approaches.

A Method of Spatial Processing for a Railway Crossing Control Radar System

Introduction. Railway crossing is a source of increased danger for vehicles and pedestrians. To increase the safety of traffic at railway crossings, radar systems based on antenna arrays (AA) can be used. The important requirements for radar at a railway crossing are a wide field of view (up to 90 degrees) and, at the same time, a high accuracy in determining coordinates. Therefore, an analysis of methods for constructing AAs and spatial processing for an automatic traffic control system at a railway crossing seems to be a relevant research task. Aim. Design of a method for constructing the topology of an AA and spatial processing of a radar system for monitoring traffic at a railway crossing, providing a wide field of view with a high accuracy in determining the coordinates of targets. Materials and methods. The considered method was developed based on the theory of space-time signal processing. The design of the analyzed AA topologies was carried out by the finite element method (FEM) and the finite differ-ence time domain method (FDTD) based on segments of a microstrip transmission line. Results. A method for constructing a filled transceiver antenna array and a beamforming algorithm, which provide high angular resolution and unambiguous measurement of the target's angular coordinates in a wide field of view with relatively low computational complexity, was developed. Mathematical and electrodynamic modeling of the designed AA topologies was performed. Adjusted values of the radiation patterns (RP) of the transmitting and receiving AA were obtained, which showed good agreement with the calculated values. The main design solutions regarding the construction of AA radar for a railway crossing control system are presented to provide a wide field of view when determining the coordinates of targets. Conclusion. It was shown that the width of the resulting RP can be reduced by several times compared to the width of the receiving RP when using two transmitting antennas located at the edges of the aperture. This approach is similar to that used in the MIMO technology, although requiring no coherence of transmission channels and use of a system of orthogonal signals. The findings determine the prospects of using the developed method.

Wide field of view chiral imaging with a liquid crystal planar lens enabled by digitalized nanogratings.

To compensate for the inability for polarization imaging by conventional methods, metasurface optics with compactness and multi-function emerge as an approach to provide images with different linear and circular polarizations. Here, we propose a liquid crystal (LC) geometric phase-based chiral imaging lens (CIL) that simultaneously forms images of objects with opposite helicity. The CIL (Diameter 2.3 cm) was optimized by a spatial multiplexing algorithm and realized using the digital holography technique, where the LC domains were regulated by pixelated nanogratings with varied orientation. We investigated the potential of the patterning technique toward high order LC alignment by balancing the periodicity and depth of the nanogratings. The CIL exhibited a wide field of view of ±20°, which is attributed to the self- assembling effects of LC molecules. The compactness, lightness, and ability to produce chiral images of the LC CIL even at large angles have significant potential for practical polarization imaging.

Noninvasive Imaging of a Liquid Jet

Abstract Liquid jets are found in many applications, from printing to manufacturing to entertainment. This study uses three different noninvasive imaging modalities to compare resulting images of a liquid jet operating at three Reynolds numbers that cover laminar, transitional, and turbulent flow. Selected measurement quantities from each image type are also compared. High-speed backlit (BL) imaging is a simple imaging technique found in many laboratories, and this is compared to two high-speed X-ray imaging techniques, white beam (WB) imaging and focused beam (FB) radiography. BL imaging can provide a wide field of view and is easy to implement, but it only shows the presence or absence of liquid. WB imaging can show detailed contours on the surface of the liquid jet, but the imaging region is much smaller. FB radiography produces a point-source measurement and can provide the quantitative, instantaneous local liquid path length, termed the equivalent path length (EPL). All three techniques provide similar measures of jet thickness, with the FB measurements having less variation. FB measurements can also provide detailed cross sections of the average liquid jet thickness at high spatial resolutions.

Perceptual Visibility Model for Temporal Contrast Changes in Periphery

Modeling perception is critical for many applications and developments in computer graphics to optimize and evaluate content generation techniques. Most of the work to date has focused on central (foveal) vision. However, this is insufficient for novel wide-field-of-view display devices, such as virtual and augmented reality headsets. Furthermore, the perceptual models proposed for the fovea do not readily extend to the off-center, peripheral visual field, where human perception is drastically different. In this article, we focus on modeling the temporal aspect of visual perception in the periphery. We present new psychophysical experiments that measure the sensitivity of human observers to different spatio-temporal stimuli across a wide field of view. We use the collected data to build a perceptual model for the visibility of temporal changes at different eccentricities in complex video content. Finally, we discuss, demonstrate, and evaluate several problems that can be addressed using our technique. First, we show how our model enables injecting new content into the periphery without distracting the viewer, and we discuss the link between the model and human attention. Second, we demonstrate how foveated rendering methods can be evaluated and optimized to limit the visibility of temporal aliasing.

Analysis and design of a wide-field and large-numerical-aperture compact imaging spectrometer with a freeform surface.

Wide-field-of-view (FoV) Offner imaging spectrometers with freeform surfaces have been studied extensively in recent years. However, a design result with a large numerical aperture (NA) cannot be simultaneously obtained with this layout. We present the concept of a limited system in the tangential direction. Based on this insight, we present a new design method, to the best of our knowledge, based on the decenter anamorphic stop, which can achieve large NA in compact wide-FoV Offner imaging spectrometers with freeform surfaces. Compared to conventional imaging spectrometers with the same parameters, the light-gathering capacity of the decenter anamorphic stop-based imaging spectrometer is increased by more than 40%. In addition, based on the presented method, we design a compact imaging spectrometer with a wide FoV and large NA. The designed imaging spectrometer with a freeform surface has excellent performance. Finally, we fabricate and measure the freeform mirror. The surface irregularity of the freeform mirror is better than 1/30λ (λ=632.8n m). The result shows that the Offner imaging spectrometer with a freeform surface can be fabricated and will play a significant role in the fields of aeronautical and astronautical remote sensing.

Intra-annual fluctuation in morphology and microfibril angle of tracheids revealed by novel microscopy-based imaging.

Woody cells, such as tracheids, fibers, vessels, rays etc., have unique structural characteristics such as nano-scale ultrastructure represented by multilayers, microfibril angle (MFA), micro-scale anatomical properties and spatial arrangement. Simultaneous evaluation of the above indices is very important for their adequate quantification and extracting the effects of external stimuli from them. However, it is difficult in general to achieve the above only by traditional methodologies. To overcome the above point, a new methodological framework combining polarization optical microscopy, fluorescence microscopy, and image segmentation is proposed. The framework was tested to a model softwood species, Chamaecyparis obtusa for characterizing intra-annual transition of MFA and tracheid morphology in a radial file unit. According our result, this framework successfully traced the both characteristics tracheid by tracheid and revealed the high correlation (|r| > 0.5) between S2 microfibril angles and tracheidal morphology (lumen radial diameter, tangential wall thickness and cell wall occupancy). In addition, radial file based evaluation firstly revealed their complex transitional behavior in transition and latewood. The proposed framework has great potential as one of the unique tools to provide detailed insights into heterogeneity of intra and inter-cells in the wide field of view through the simultaneous evaluation of cells' ultrastructure and morphological properties.

Target discrimination in the extended shortwave infrared band (2 to 2.5μm) compared with visible, near-infrared, and SWIR in degraded visual environments

Long-range target identification is well studied in the visible (Vis) and near-infrared (NIR) bands and more recently in the shortwave infrared (SWIR). The longer wavelength of SWIR (1 to 1.7 μm) improves target detection for both long ranges and under challenging atmospheric conditions because it is less limited by scattering and absorption in the atmosphere. For these reasons, SWIR sensors are proliferating on military platforms. The extended shortwave infrared (eSWIR) band spanning from 2 to 2.5 μm is not typically limited by diffraction, and as a result, the band benefits target acquisition both at long ranges and for degraded visual environments (DVEs). Theoretical and experimental data compare eSWIR with Vis, NIR, and SWIR for atmospheric transmission, reflectivity, illumination, and sensor resolution and sensitivity. The experimental setup includes two testbeds, each with four cameras. The first is a wide field of view (FOV) testbed matching FOV at 20 deg for each camera. The second is a narrow FOV telescope testbed to match instantaneous FOV for consistent resolution across all four bands at long ranges. Both the theory and experiment demonstrate advantages of using eSWIR for long-range target identification under DVEs.

Neural compression for hologram images and videos.

Holographic near-eye displays can deliver high-quality three-dimensional (3D) imagery with focus cues. However, the content resolution required to simultaneously support a wide field of view and a sufficiently large eyebox is enormous. The consequent data storage and streaming overheads pose a big challenge for practical virtual and augmented reality (VR/AR) applications. We present a deep-learning-based method for efficiently compressing complex-valued hologram images and videos. We demonstrate superior performance over the conventional image and video codecs.