Wide pH Range Research Articles

Alkanediol–hexafluoroisopropanol amphiphilic supramolecular solvent: Fabrication, characterization, and application potential for doping control of hormones and metabolic modulators in human urine

A novel amphiphilic supramolecular solvent (SUPRAS) was developed by hexafluoroisopropanol (HFIP)-induced self-assembly of 1,2-hexanediol in an aqueous matrix. Its application potential in multiclass determination was assessed by extracting from urine 10 prohibited hormones and metabolic modulators (log P from 2.38 to 7.57) listed by the World Anti-Doping Agency (WADA). This SUPRAS is stably formed across a wide pH range (2–12) and is unaffected by salt concentrations (<10 % g mL−1 of NaCl), and it has a higher density than water. The dehydration and hydrogen bonding ability of HFIP, as well as hydrophobic interactions between alkanediols, dominates the formation of the SUPRAS. The nanostructure of the SUPRAS, composed of 1,2-hexanediol, HFIP, and a high content of water (>25 %, w/w), forms large spherical micellar aggregates (10–100 μm) that exhibit amphiphilic properties. A 1,2-hexanediol-HFIP SUPRAS-based liquid-phase microextraction (LPME) method for detection of selected prohibited drugs in urine coupled with liquid chromatography–tandem mass spectrometry (LC-MS/MS) was established, optimized, and validated. The method showed fast extraction time (30 s of vortex) and low solvent consumption (160 μL of organic solvent). Under the optimal conditions (7 % g mL−1 of 1,2-hexanediol, 10 % v/v of HFIP), the SUPRAS achieved high extraction efficiencies (>80 %) and an enrichment factor of 6.0, with minimal matrix effects for all analytes due to its high amphiphilicity and large surface area. The method demonstrated excellent linearity (R ≥ 0.9909), with method limits of detection ranging from 0.018 to 0.18 ng mL−1 and method limits of quantitation ranging from 0.060 to 0.60 ng mL−1, which are well below the minimum required performance levels set by authorities. Furthermore, the intra- and inter-day relative recoveries for spiked human urine samples varied in the ranges of 90.3 %–121 % and 88.1–119 %, respectively, with relative standard deviations less than 13 % and 19 %, respectively. This SUPRAS-based LPME method proves to be simple, highly efficient, and eco-friendly, and it has promising potential for multiclass determination in doping control.

Autochthonous bioaugmentation strategies for the successful bioremediation of high-salt petrochemical wastewater using a biosurfactant-producing Enterobacter cloacae Z11

Petrochemical wastewater contains a high concentration of refractory aliphatic and aromatic hydrocarbons. Bioremediation of these hazardous materials using autochthonous bioaugmentation (ABA) strategy is attracting increasing interest. Herein, an indigenous biosurfactant-producing bacteria Z11 was isolated and identified as Enterobacter sp. The reintroduction of Z11 into petrochemical wastewater led to a substantial reduction (P < 0.01) in TPHs, decreasing from 8099 to 1723 mg/L, as well as a significant decrease in COD, decreasing from 8064.2 to 1689.2mg/L. At a critical micelle concentration of 200mg/L, the biosurfactant synthesized by Z11 exhibited an extraordinary decrease in surface tension from 67.5 to 29 mN/m. The biosurfactant demonstrated favorable surface activity over a wide pH, temperature, and salinity range. Based on a series of chemical analyses, the biosurfactant was classified as phospholipid. The autochthonous bioaugmentation technique developed by Z11 indicated a significant increase (P < 0.05) in the degradation of n-alkanes of varying chain lengths and polycyclic aromatic hydrocarbons. The analysis of the microbial composition demonstrated that the addition of Z11 caused a rise in bacterial populations capable of hydrocarbon decomposition, such as Pseudomonas sp. and Stenotrophomonas sp. The activities of two enzymes involved in degradation, alkane hydroxylase and alcohol dehydrogenase, increased dramatically and showed a significant (P < 0.05) correlation with Enterobacter sp. Z11. The proposed mechanism could be elucidated that functional genes regulate the secretion of biodegradation enzymes and biosurfactants to promote the deep degradation of petroleum hydrocarbons. This study provides technical support for the reintroduction of autochthonous microorganisms capable of producing biosurfactants in implementing in situ ABA strategies.

Fabrication of microfluidic pH sensing chip based on sputtered Sb2O3/Sb thin film working electrode and AgIO3/Ag thin film reference electrode for detection of A549 cells

In this study, we present the fabrication and characterization of a microfluidic pH sensing chip designed to detect human lung cancer (A549) cells. The chip utilizes a Sb2O3/Sb thin film as the working electrode and an AgIO3/Ag thin film as the reference electrode, both deposited using the radio frequency (RF) sputtering technique. The PDMS microfluidic channel was prepared using a 3D-printed mold, followed by curing of PDMS within the mold. The fabricated sensing chip demonstrated excellent linear response (R2 ∼ 0.99) and appreciable Nernstian sensitivity (average = -57.02 ± 1.23 mV/pH, n = 4) in a wide pH range of 1.68–10.01. It exhibited good stability over a 48-hour duration with acceptable drift voltage and negligible temperature impact on the sensing performance. Further, in-vitro pH testing of human lung cancer (A549) cells was performed to investigate the real-time pH measurement ability of the developed microfluidic pH sensing chip.

Transparent, flexible, and eco-friendly starch-based films for reversible optoelectronic noses for food spoilage monitoring in smart packaging.

Areversible optoelectronic nose is presentedconsisting of ten acid-base indicators incorporated into a starch-based film, covering a wide pHrange. The starch substrate is odorless, biocompatible, flexible, and exhibits high tensile resistance. This optical artificial olfaction system was used to detect the early stages of food decomposition by exposing it to the volatile compounds produced during the spoialge process of three food products (beef, chicken, and pork).A smartphone was used to capture the color changes caused by intermolecular interactions between each dye and the emitted volatiles over time. Digital images were processed to generate a differential color map, which uses the observed color shifts to create a unique signature for each food product. To effectively discriminate among different samples and exposure times, we employed chemometric tools, including hierarchical cluster analysis (HCA) and principal component analysis (PCA). This approach detects food deterioration in a practical, cost-effective, and user-friendly manner, making it suitable for smart packaging. Additionally, the use of starch-based films in the food industry is preferable due to their biocompatibility and biodegradability characteristics.

Standard operating procedure for the analysis of major ions in hydrothermal fluids by ion chromatography

This standard operating procedure (SOP) describes an ion chromatography (IC) procedure for the major cations and anions in hydrothermal fluids. Hydrothermal fluids are aqueous solutions with a wide range of temperature, salinity, pH and ion species that can be used by microbial metabolism as electron donors and electron acceptors. Due to the high variability of the environmental physical-chemical parameters in these samples, we have developed this protocol taking into account the special features of the matrices analyzed. An Eco IC Metrohm system equipped with a conductivity detector was used. Calibration curves are linear in the 0.1 to 10 mg/L concentration range for cations Ca2+, Na+, K+, Mg2+, NH4 + and anions Cl-, Br-, NO3 -, NO2 -, SO4 2- , HPO4 2-.

Effectively adsorb Au(S2O3)23- using aminoguanidine as trapping group from thiosulfate solutions.

Thiosulfate gold leaching is one of the most promising green cyanide-free gold extraction processes; however, the difficulty of recovering Au(I) from the leaching system hinders its further development. This study prepared aminoguanidine-functionalized microspheres (AGMs) via a one-step reaction involving nucleophilic substitution between aminoguanidine hydrochloride and chloromethylated polystyrene microspheres and used AGMs to adsorb Au(I) from thiosulfate solutions. Scanning electron microscopy, Brunauer-Emmett-Teller analysis, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy were used to analyze the structure and properties of AGMs. Experiments were designed to investigate the effects of pH, temperature, initial Au(I), and thiosulfate concentrations on the gold adsorption performance of AGMs. Results demonstrated that AGMs can efficiently adsorb Au(I) from thiosulfate solutions in a wide pH range. The adsorption process conforms to the pseudo-second-order kinetic model and Langmuir isotherm model, with a maximum capacity of 22.03kg/t. Acidic thiourea is an effective desorbent, and after four adsorption-desorption cycles, the adsorption rate of Au(I) by AGMs is 78.63%, which shows AGMs have good cyclic application potential. Based on the results of characterization, experiments, and density functional theory calculations, the mechanism for the adsorption of [Au(S2O3)2]3- on AGMs involves anion exchange. Importantly, AGMs exhibited satisfactory adsorption property for Au(I) in practical Cu2+-NH3(en)-S2O32- systems. This study provided experimental reference for the recovery of Au(I) from thiosulfate solution.

PH-Universal Electrocatalytic CO2 Reduction with Ampere-level Current Density on Doping-engineered Bismuth Sulfide.

The practical application of the electrocatalytic CO2 reduction reaction (CO2RR) to form formic acid fuel is hindered by the limited activation of CO2 molecules and the lack of universal feasibility across different pH levels. Herein, we report a doping-engineered bismuth sulfide pre-catalyst (BiS-1) that S is partially retained after electrochemical reconstruction into metallic Bi for CO2RR to formate/formic acid with ultrahigh performance across a wide pH range. The best BiS-1 maintains a Faraday efficiency (FE) of ~95% at 2000 mA cm-2 in a flow cell under neutral and alkaline solutions. Furthermore, the BiS-1 catalyst shows unprecedentedly high FE (~95%) with current densities from 100 to 1300 mA cm-2 under acidic solutions. Notably, the current density can reach 700 mA cm-2 while maintaining a FE of above 90% in a membrane electrode assembly electrolyzer and operate stably for 150 h at 200 mA cm-2. In-situspectra and density functional theory calculations reveals that the S doping modulates the electronic structure of Bi and effectively promotes the formation of the HCOO* intermediate for formate/formic acid generation. This work develops the efficient and stable electrocatalysts for sustainable formate/formic acid production.

Efficient removal of cadmium from aqueous solution by chitosan grafted pillared bentonite

Developing an environmentally friendly adsorbent with high adsorption capacity and economic advantages is crucial for the treatment of cadmium (Cd)-contaminated wastewater. In this study, Bentonite (Bt), which is widely distributed in nature, was used to prepare a new type of chitosan (CS)-grafted polymerized aluminum-pillared bentonite (i.e., Al@Bt): CS@Al@Bt. This new material effectively addresses the issues of chitosan’s poor mechanical strength, limited load capacity, and the weak adsorption properties of raw bentonite for Cd. The effects of synthesis conditions on Cd adsorption by modified bentonite were investigated through batch experiments. The adsorption mechanism was revealed by characterization tests such as X-ray diffraction (XRD), N2 adsorption-desorption experiments, Scanning and Transmission electron microscopy (SEM-TEM), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS). The results showed that compared to raw Bt, when the ratio of Al in polymerized aluminum to the cation exchange capacity (CEC) of Bt was increased to 5 (i.e., Al/CEC=5), the specific surface area (SSA) of Bt increased from 78.46 m²/g to 195.99 m²/g. Additionally, the interlayer spacing and total pore volume increased by 1.22 and 1.13 times, respectively. After grafting chitosan onto Al@Bt, CS@Al@Bt reached adsorption equilibrium rapidly within 15 min, achieving a removal rate of up to 99.82% (initial concentration of Cd(II) was 20 mg/L, and the solid-liquid ratio was 1 g/L). Additionally, CS@Al@Bt showed good adsorption performance over a wide pH range. The rich pore structure of CS@Al@Bt and the complexation between amino (-NH2) and hydroxyl (-OH) groups with Cd(II) were the main mechanisms for the removal of Cd(II) from the solution. The application showed that CS@Al@Bt effectively reduced Cd-containing mining wastewater from class V to class II quality, underscoring its significant potential for treating Cd(II)-contaminated wastewater.

Prominent Intrinsic Proton Conduction in Two Robust Zr/Hf Metal-Organic Frameworks Assembled by Bithiophene Dicarboxylate.

To date, developing crystalline proton-conductive metal-organic frameworks (MOFs) with an inherent excellent proton-conducting ability and structural stability has been a critical priority in addressing the technologies required for sustainable development and energy storage. Bearing this in mind, a multifunctional organic ligand, 3,4-dimethylthiophene[2,3-b]thiophene-2,5-dicarboxylic acid (H2DTD), was employed to generate two exceptionally stable three-dimensional porous Zr/Hf MOFs, [Zr6O4(OH)4(DTD)6]·5DMF·H2O (Zr-DTD) and [Hf6O4(OH)4(DTD)6]·4DMF·H2O (Hf-DTD), using solvothermal means. The presence of Zr6 or Hf6 nodes, strong Zr/Hf-O bonds, the electrical influence of the methyl group, and the steric effect of the thiophene unit all contribute to their structural stability throughout a wide pH range as well as in water. Their proton conductivity was fully examined at various relative humidities (RHs) and temperatures. Creating intricate and rich H-bonded networks between the guest water molecules, coordination solvent molecules, thiophene-S, -COOH, and -OH units within the framework assisted proton transfer. As a result, both MOFs manifest the maximum proton conductivity of 0.67 × 10-2 and 4.85 × 10-3 S·cm-1 under 98% RH/100 °C, making them the top-performing proton-conductive Zr/Hf-MOFs. Finally, by combining structural characteristics and activation energies, potential proton conduction pathways for the two MOFs were identified.

Schottky junction-mediated carrier separation in BiOBr/Ti3C2Tx van der Waals heterojunction photocatalyst for increased removal of Cr(VI) under visible-light

The photocatalytic removal of pollutants can integrate efficient solar energy utilization with wastewater treatment. Herein, we report a simple strategy to construct BiOBr/Ti3C2Tx composite photocatalysts consisting of self-assembled van der Waals (vdw) heterojunction structures containing Schottky junctions. The vdW interaction between BiOBr and Ti3C2Tx and the structural stability of the catalysts were validated by density functional theory (DFT) calculations and an ab initio molecular dynamic simulation (AIMD). Compared to BiOBr, the BiOBr/Ti3C2Tx composites exhibited an enhanced light absorption capability and photocurrent response, along with a lower carrier recombination rate and charge-transfer resistance. The BiOBr/Ti3C2Tx activity for the photoreduction of hexavalent chromium (Cr(VI)) under visible-light irradiation considerably surpassed that of the original BiOBr (53.9%). Using the BTC-0.8 catalyst (with a Ti3C2Tx: BiOBr mass ratio of 0.8%) optimal reduction efficiency (94.0%) for Cr(VI) with a reaction rate approximately 3.5 times that of pure BiOBr. The BTC-0.8 catalyst was viable over a wide pH range and maintained an 83.9% photoreduction rate after four cycling experiments. The exceptional photocatalytic ability of BiOBr/Ti3C2Tx was achieved because Ti3C2Tx served as an electron injection layer that separated photogenerated carriers. The Schottky junction constructed within the BiOBr/Ti3C2Tx vdW heterojunctions suppressed electron backflow, promoting carrier separation. The excellent photocatalytic performance and strong cyclic stability of BiOBr/Ti3C2Tx demonstrated the considerable application potential of this photocatalyst.

Alkaliphilic and thermostable lipase production by leaf litter fungus Leptosphaerulina trifolii A SMR-2011.

Fungi that inhabit fire-prone forests have to be adapted to harsh conditions and fungi affiliated to Ascomycota recovered from foliar litter samples were used for bioprospecting of molecules such as enzymes. Agni's fungi isolated from leaf litter, whose spores are capable of tolerating 110 oC were screened for thermostable lipases. One of the isolates, Leptosphaerulina trifolii A SMR-2011exhibited high positive lipase activity than other isolates while screening through agar plate assay using Tween 20 in the medium. Maximum lipase activity (173.2 U/mg) of L. trifolii was observed at six days of inoculation and decreased thereafter. Among different oils used, the maximum lipase activity was attained by soybean oil (940.1 U/mg) followed by sunflower oil (917.1 U/mg), and then by mustard oil (884.8 U/mg), showing its specificity towards unsaturated fatty acids. Among the various organic nitrogen sources tested, soybean meal showed maximum lipase activity (985.4 U/mg). The partially purified enzyme was active over a wide range of pH from 8 to 12 with a pH optimum of 11.0 (728.1 U/mg) and a temperature range of 60-80 oC with an optimal temperature of 70 oC (779.1 U/mg). The results showed that lipase produced by L. trifolii is alkali stable and retained 85% of its activity at pH 11.0. This enzyme also showed high thermal stability retaining more than 50% of activity when incubated at 60 oC to 90°C for 2h. The ions Ca2+ and Mn2+ induced the lipase activity, while Cu2+ and Zn2+ ions lowered the activity compared to control. These results suggests that the leaf litter fungus L. trifolii serves as a potential source for the production of alkali-tolerant and thermostable lipase.

Synthesis and application of a novel fluorescent probe based on benzothiazole for detection of hydrazine in real samples

ABSTRACT A novel fluorescence enhancement type probe 2-(1, 3-benzothiazol-2-yl)-5-(diethylamino)phenyl thiophene-2-carboxylate (PTN) for the detection of hydrazine (N2H4) was designed and synthesised. The fluorescence of the probe PTN solution increased dramatically upon the addition of N2H4 and its appearance changed from nearly colourless to dazzling blue. The simple structure and readily available fluorescent probe provide a novel approach for the quantitative detection of N2H4 in the linear range from 0 to 37.5 μM, with a detection limit down to 56 nM, fast response (within 5 min), strong anti-interference ability, easy operation (test paper), and a wide range of pH from 6 to 10. Furthermore, the probe PTN was able to detect N2H4 in actual water samples and image the exogenous N2H4 signal in colorimetric test strips and living zebrafish.

Degradation of tetracycline under a wide pH range in a heterogeneous photo bio-electro-fenton system using FeMn-LDH/g-C3N4 cathode: Performance and mechanism

The widespread use of antibiotics and the inefficiency of traditional degradation treatments pose threats to the environment and human health. Previous studies have reported the potential of bio-electro-Fenton (BEF) processes for antibiotic removal. However, some drawbacks, such as a strict pH range of 2–3 and iron sludge generation, limit their large-scale application. Thus, to overcome the narrow pH range of traditional BEF processes, a photo-BEF (PBEF) system was established using a novel FeMn-layered double hydroxide (LDH)/graphitic carbon nitride (g-C3N4) (FM/CN) composite cathode. The performance of the PBEF system was investigated by degrading tetracycline (TC) under low-power LED lamp irradiation. The results indicated that the pH range of the PBEF system could be expanded to 3–11 using an FM/CN cathode, which exhibited a TC removal efficiency of 63.0%–75.9%. The highest TC removal efficiency was achieved at pH 7. The efficient mineralization of TC by the PBEF system can be high, up to 67.6%. In addition, the TC removal mechanism was discussed in terms of reactive oxygen species, TC degradation intermediate analyses, and density functional theory (DFT) calculations. Strong oxidative hydroxyl radicals (·OH) were the dominant reactive oxidizing species in the PBEF system, followed by ·O2− and h+. Three pathways of TC degradation were proposed based on the analysis of intermediates, and the reactive sites attacked by electrophilic reagents were explored using DFT modeling. In addition, the overall toxicity of TC degradation intermediates effectively decreased in the PBEF system. This work offers deep insights into the TC removal mechanisms and performance of the PBEF system over a wide pH range of 3–11.

Heteroxylan hydrolysis by a recombinant cellulase-free GH10 xylanase from the alkaliphilic bacterium Halalkalibacterium halodurans C-125.

The search for affordable enzymes with exceptional characteristics is fundamental to overcoming industrial and environmental constraints. In this study, a recombinant GH10 xylanase (Xyn10-HB) from the extremelyalkaliphilic bacterium Halalkalibacteriumhalodurans C-125 cultivated at pH 10 was cloned and expressed in E. coli BL21(DE3). Removal of the signal peptide improved the expression, and an overall activity of 8 U/mL was obtained in the cell-free supernatant. The molecular weight of purified Xyn10-HB was estimated to be 42.6 kDa by SDS-PAGE. The enzyme was active across a wide pH range (5-10) with optimal activity recorded at pH 8.5 and 60°C. It also presented good stability with a half-life of 3h under these conditions. Substrate specificity studies showed that Xyn10-HB is a cellulase-free enzyme that conventionally hydrolyse birchwood and oat spelts xylans (Apparent Km of 0.46mg/mL and 0.54mg/mL, respectively). HPLC analysis showed that both xylans hydrolysis produced xylooligosaccharides (XOS) with a degree of polymerization (DP) ranging from 2 to 9. The conversion yield was 77% after 24h with xylobiose and xylotriose as the main end-reaction products. When assayed on alkali-extracted wheat straw heteroxylan, the Xyn10-HB produced active XOS with antioxidant activity determined by the DPPH radical scavenging method (IC50 of 0.54mg/mL after 4h). Owing to its various characteristics, Xyn10-HB xylanase is a promising candidate for multiple biotechnological applications.

Open-Framework Vanadate as Efficient Ion Exchanger for Uranyl Removal.

The elimination of uranium from radioactive wastewater is crucial for the safe management and operation of environmental remediation. Here, we present a layered vanadate with high acid/base stability, [Me2NH2]V3O7, as an excellent ion exchanger capturing uranyl from highly complex aqueous solutions. The material possesses an indirect band gap, ferromagnetic characteristic and a flower-like morphology comprising parallel nanosheets. The layered structure of [Me2NH2]V3O7 is predominantly upheld by the H-bond interaction between anionic framework [V3O7]nn- and intercalated [Me2NH2]+. The [Me2NH2]+ within [Me2NH2]V3O7 can be readily exchanged with UO22+. [Me2NH2]V3O7 exhibits high exchange capacity (qm = 176.19 mg/g), fast kinetics (within 15 min), high removal efficiencies (>99%), and good selectivity against an excess of interfering ions. It also displays activity for UO22+ ion exchange over a wide pH range (2.00-7.12). More importantly, [Me2NH2]V3O7 has the capability to effectively remove low-concentration uranium, yielding a residual U concentration of 13 ppb, which falls below the EPA-defined acceptable limit of 30 ppb in typical drinking water. [Me2NH2]V3O7 can also efficiently separate UO22+ from Cs+ or Sr2+ achieving the highest separation factors (SFU/Cs of 589 and SFU/Sr of 227) to date. The BOMD and DFT calculations reveal that the driving force of ion exchange is dominated by the interaction between UO22+ and [V3O7]nn-, whereas the ion exchange rate is influenced by the mobility of UO22+ and [Me2NH2]+. Our experimental findings indicate that [Me2NH2]V3O7 can be considered as a promising uranium scavenger for environmental remediation. Additionally, the simulation results provide valuable mechanistic interpretations for ion exchange and serve as a reference for designing novel ion exchangers.

Inducing α-Helicity in Peptides by Silver Coordination to Cysteine.

Short peptide sequences consisting of two cysteine residues separated by three other amino acids display complete change from random coil to α-helical secondary structure in response to addition of Ag+ ions. The folded CXXXC/Ag+ complex involves formation of multinuclear Ag+ species and is stable in a wide pH range from below 3 to above 8. The complex is stable through reversed-phase HPLC separation as well as towards a physiological level of chloride ions, based on far-UV circular dichroism spectroscopy. In electrospray MS under acidic conditions a peptide dimer with four Ag+ ions bound was observed, and modelling based on potentiometric experiments supported this to be the dominating complex at neutral pH together with a peptide dimer with 3 Ag+ and one proton at lower pH. The complex was demonstrated to work as a N-terminal nucleation site for inducing α-helicity into longer peptides. This type of silver-mediated peptide assembly and folding may be of more general use for stabilizing not only peptide folding but also for controlling oligomerization even under acidic conditions.

Energetics of the H-Bond Network in Exiguobacterium sibiricum Rhodopsin.

Exiguobacterium sibiricum rhodopsin (ESR) functions as a light-driven proton pump utilizing Lys96 for proton uptake and maintaining its activity over a wide pH range. Using a combination of methodologies including the linear Poisson-Boltzmann equation and a quantum mechanical/molecular mechanical approach with a polarizable continuum model, we explore the microscopic mechanisms underlying its pumping activity. Lys96, the primary proton uptake site, remains deprotonated owing to the loss of solvation in the ESR protein environment. Asp85, serving as a proton acceptor group for Lys96, does not form a low-barrier H-bond with His57. Instead, deprotonated Asp85 forms a salt-bridge with protonated His57, and the proton is predominantly located at the His57 moiety. Glu214, the only acidic residue at the end of the H-bond network exhibits a pKa value of ∼6, slightly elevated due to solvation loss. It seems likely that the H-bond network [Asp85···His57···H2O···Glu214] serves as a proton-conducting pathway toward the protein bulk surface.

Cu/Co Bimetallic Carbon Catalyst as a Highly Efficient Promoter for Reactive Dyes Degradation with PMS.

The synergistic effect between bimetallic catalysts has been confirmed as an effective method for activating persulfate (PMS). Therefore, we immobilized copper-cobalt on chitosan to prepare bimetallic carbon catalysts for PMS activation and degradation of reactive dyes. Experimental results demonstrate that the CuCo-CTs/PMS catalytic degradation system exhibits excellent degradation performance toward various types of reactive dyes (e.g., Ethyl violet, Chlortalidone, and Di chlorotriazine), with degradation rates reaching 90% within 30 min. CuCo-CTs exhibit high catalytic activity over a wide pH range of 3-11 at room temperature and under static conditions, degrading over 92% of RV5 within 60 min. ultraviolet-visible (UV-vis) spectroscopy and color changes in the dye solution confirm the effective degradation of RV5, with a degradation rate of 97.2% within 10 min. Additionally, CuCo-CTs demonstrate good stability and reusability, maintaining a degradation rate of 92.8% after eight cycles. Kinetic studies indicate that the degradation follows pseudo-first-order kinetics. Furthermore, based on the results of radical scavenging experiments, the catalytic degradation mechanism of the dye involves both radical and nonradical pathways, with 1O2 identified as the primary active species. This study provides insights and experimental evidence for the application of persulfate oxidation in the treatment of dyeing wastewater.

Thiourea Functionalised Receptor for Selective Detection of Mercury Ions and its Application in Serum Sample.

A thiourea functionalised fluorescent probe 1-phenyl-3-(pyridin-4-yl)thiourea was synthesized and utilised as a fluorescent turn-on chemosensor for the selective recognition of Hg2+ ion over competitive metal ions including Na+, Mn2+, Li+, Cr2+, Ni2+, Ca2+, Cd2+, Mg2+, K+, Co2+, Cu2+, Zn2+, Al3+ and Fe2+ ions based on the inter-molecular charge transfer (ICT). Intriguingly, the receptor demonstrated unique sensing capabilities for Hg2+ in DMSO: H2O (10:90, v/v). The addition of Hg2+ ions to the sensor resulted in a blue shift in the absorption intensity and also enhancement in fluorescence intensity at 435nm. Fluorescence emission intensity increased linearly with Hg2+ concentration ranging from 0 to 80 µL. The detection limit and binding constant were determined as 0.134 × 10-6M and 1.733 × 107M-1, respectively. The sensing behavior of Hg2+ was further examined using DLS, SEM and FTIR. The probe could detect Hg2+ ions across a wide pH range. Furthermore, the receptor L demonstrated good sensing performance for Hg2+ in bovine serum albumin and actual water samples.

Lipazy roślinne – struktura molekularna, rola w ontogenezie oraz potencjał biotechnologiczny

Lipases are enzymes commonly found in microorganisms, fungi, plants and animals. Their main function in cell metabolism is the hydrolysis (lipolysis) of ester bonds between fatty acids and glycerol in mono-, di- and triacylglycerols. In plants, lipases play an important role in ontogeny, participating in both vegetative development and generative stages. These enzymes may also be a component of plant responses to biotic and abiotic stresses. Based on the similarity of the amino acid sequence and vacuolar localization of some plant lipases to yeast Atg15, we present a hypothesis about the participation of lipases in autophagy (precisely, in the degradation of the autophagic body) in plants. Despite the narrow substrate specificity and the type of reactions catalysed in cells, lipases find numerous biotechnological applications. The physicochemical features of lipases, which determine, for example, wide substrate specificity in vitro or high stability in a wide range of pH and temperature, make these enzymes the subject of applied research, and plant lipases show an increasing potential in this area of science and industry.