Wide Detection Research Articles

Salt gradient enhanced sensitivity in nanopores for intracellular calcium ion detection

Intracellular calcium ion detection is of great significance for understanding the cell metabolism and signaling pathways. Most of the current ionic sensors either face the size issue or sensitivity limit for the intracellular solution with high background ion concentrations. In this paper, we proposed a calmodulin (CaM) functionalized nanopore for sensitive and selective Ca2+ detection inside living cells. A salt gradient was created when the nanopore sensor filled with a low concentration electrolyte was in contact with a high background concentration solution, which enhanced the surface charge-based detection sensitivity. The nanopore sensor showed a 10 × sensitivity enhancement by application of a 100-fold salt gradient, and a detection limit of sub nM. The sensor had a wide detection range from 1 nM to 1 mM, and allowed for quick calcium ion quantification in a few seconds. The sensor was demonstrated for intracellular Ca2+ detection in A549 cells in response to ionomycin.

Chitosan/polyacrylic acid film based on a tapered fiber structure for the ultrasensitive detection of Cu2+ concentration

A tapered fiber with a total length of 7.680 mm and a taper waist diameter of 11.8 μm is fabricated, and encapsulated with a V-type quartz groove to enhance the mechanical strength of the sensor. Chitosan (CS) and polyacrylic acid (PAA) solution through the layer-by-layer self-assembly are deposited on the surface of the tapered fiber to detect the concentration of copper ions (Cu2+) in deionized water (DIW). Due to diffusion and chemisorption of Cu2+ in the functional films, the optimal adsorption effect of Cu2+ is achieved when the CS and PAA film are assembled with 4 layers each. The dip wavelength of interference spectra exhibits different nonlinear responses to different ranges of Cu2+ concentration due to the coordination effect (CS/PAA)4 with Cu2+ and hydrolysis of the (CS/PAA)4. After functionalizing the surface of the fiber with (CS/PAA)4, the wavelength sensitivity and detection limit (DL) for Cu2+ concentration in the DIW are 46.87 nm/μΜ and 0.31 μM in the range of 0.16 ∼ 2.4 μM. Additionally, the sensor designed possesses the advantages of wide detection range, temperature insensitivity, and excellent stability. It indicates that the proposed sensor has a promising potential for application in Cu2+ concentration detection.

Developing a Chemiresistive Gas Sensor Array for Simultaneous Detection of Ammonia and Carbon Dioxide Gases.

Chemiresistive polymer-based sensors are promising platforms for monitoring various gases and volatile organic compounds. While they offer appealing attributes, such as ease of fabrication, flexibility, and cost-effectiveness, most of these sensors have a nearly identical response to cross-reactive gases, such as ammonia (NH3) and carbon dioxide (CO2). Aiming to address the shortcomings of chemiresistive polymer-based sensors in selectivity and simultaneous measurements of cross-reactive gases, a chemiresistive sensor array was developed consisting of components sensitive to carbon dioxide and ammonia as well as a control segment to provide the baseline. The designed system demonstrated a wide detection range for both ammonia (ranging from 0.05 to 1000 ppm) and carbon dioxide (ranging from 103 to 106 ppm) at both room and low temperatures (e.g., 4 °C). Our results also demonstrate the ability of this sensor array for the simultaneous detection of carbon dioxide and ammonia selectively in the presence of other gases and volatile organic compounds. Finally, the array was used to monitor CO2/NH3 in real food samples to demonstrate the potential for real-world applications.

Wide-range, durable, and adaptable miniature pressure sensor based on planar capacitance

Capacitive pressure sensor (CPS) is widely used in the field of industrial equipment, because of the merits of fast dynamic response and high resolution. However, the traditional laminated CPS makes it difficult to achieve a wide detection limit in a small size, and this structure is susceptible to electromagnetic interference. Here we developed a miniature planar capacitive pressure sensor (MPCPS) with high performance, which can realize the response to external touching stimuli through the deformation of the packaging material and the change of the equivalent resistance. A metal shielding layer was added under the insulating substrate to effectively isolate the external interference. The thickness of the sensor is about 200 μm, and the diameter of the core sensing area is less than 1 mm. Two types of electrodes with different shapes were designed, among which the spiral electrode MPCPS (S-MPCPS) has better performance than the linear electrode MPCPS. The S-MPCPS has a sensitivity of 99.2% MPa−1 in the low-pressure range (0–0.1 MPa), fast response (20 ms), wide detection limit (>1 MPa), and high durability (>2000 cycles). In addition, MPCPS is proven to have good resistance to high temperature and oil contamination. Finally, practical applications such as contact pressure measuring on the meshing surface of spur gears and mechanical gripper clamping force monitoring were successfully demonstrated. These results shed light on the potential application of the MPCPS in the pressure detection of industrial equipment.

Strain- and humidity-insensitive, stretchable hydrogel-based oxygen sensor with corrosion-free electrodes for wireless oxygen detection

As the public puts higher and higher demands on wearing comfort, wearable gas sensors rapidly advance toward intrinsic flexibility and stretchability. However, many challenges arise during the development of intrinsically stretchable sensors. The deformation of the sensor following the movement of the wearer and uncertain changes in environmental humidity can cause additional interference signals. In addition, severe electrode corrosion also challenges the long-term continuous monitoring of sensors. Here, a stretchable strain- and humidity-insensitive O2 sensor is proposed by adopting a serpentine hydrogel fiber structure and hydrophobic elastomer encapsulation strategy. Besides, the introduction of the Pt/C electrode and salt immersion strategy effectively eliminate electrode corrosion and electrolyte consumption, significantly prolonging hydrogel sensor's lifespan. Importantly, we propose, for the first time, an oxygen pump mechanism to elucidate positive current transferring and electrode corrosion-free in hydrogel oxygen sensors, which is further validated through well-designed experiments. Optimized sensor exhibits a wide detection range (30 ppm-100%), linear sensitivity (0.03%/ppm), exceptional repeatability and remarkable tolerance towards environmental variations. Integrating oxygen sensor with Bluetooth circuit further enables wireless monitoring of oxygen while confirming its practicality. This research provides insights into improving the interference immunity and longevity of flexible oxygen sensors while showcasing their potential in wearable applications.

Tunable porous fiber-shaped strain sensor with synergistic conductive network for human motion recognition and tactile sensing

With the rapid development of portable electronic products, smart wearable devices show great application potential in personalized motion monitoring, health monitoring and even in human-machine interaction. In particular, high-performance flexible fiber-shaped strain sensors are receiving more and more attention because they can be well integrated with clothes or human skin for real-time human activities monitoring. However, achieving improved sensitivity, wide detection range, diverse applications and easy operation of them remains a challenge. Here, we adopt a simple wet-spinning technique to prepare a porous fiber-shaped carbon nanotubes (CNTs)/silver nanoparticles (AgNPs)/thermoplastic polyurethane (TPU) fiber (CATF) for high-performance strain sensor, of which the synergistic conductive network of CNTs and AgNPs enables a wide detection range (∼248 %), high sensitivity (GF > 4295), fast response/recovery time (120 ms/140 ms) and excellent stability. Interestingly, strain sensing range and sensitivity of the sensor can be tuned by changing the AgNPs loading to make it suitable for different application scenarios. All the merits of the sensor make it capable for diverse human movements monitoring, pronunciation recognition, and gesture recognition. More importantly, our prepared CATF strain sensor can be easily weaved into wearable smart textiles, showing great potential for tactile sensing to realize multi-touch and pressure tracking. Finally, the CATF also displays efficient photothermal conversion capability even under different tensile strains up to 150 %, showing great potential in human body thermal management to improve the wearing comfort of wearable electronic fabric.

High-performance and frost-resistance MXene co-ionic liquid conductive hydrogel printed by electrohydrodynamic for flexible strain sensor

Conductive hydrogels with high performance and frost resistance are essential for flexible electronics, electronic skin, and soft robots. Nonetheless, the preparation of hydrogel-based flexible strain sensors with rapid response, wide strain detection range, and high sensitivity remains a considerable challenge. Furthermore, the inevitable freezing and evaporation of water in sub-zero temperatures and dry environments lead to the loss of flexibility and conductivity in hydrogels, which seriously limits their practical application. In this work, ionic liquids (ILs) and MXene are introduced into gelatin/polyacrylamide (PAM) precursor solution, and a PAM/gelatin/ILs/MXene/glycerol (PGIMG) hydrogel-based flexible strain sensor with MXene co-ILs ion–electron composite conductive network is prepared by combining the electrohydrodynamic (EHD) printing method and in-situ photopolymerization. The introduction of ILs provides an ionic conductive channel for the hydrogel. The introduction of MXene nanosheets forms an interpenetrating network with gelatin and PAM, which not only provides a conductive channel, but also improves the mechanical and sensing properties of the hydrogel-based flexible strain sensor. The prepared PGIMG hydrogel with the MXene co-ILs ion–electron composite conductive network demonstrates a tensile strength of 0.21 MPa at 602.82 % strain, the conductivity of 1.636 × 10−3 S/cm, high sensitivity (Gauge Factor, GF = 4.17), a wide strain detection range (1–600 %), and the response/recovery times (73 ms and 74 ms). In addition, glycerol endows the hydrogel with excellent freezing (−60 °C) and water retention properties. The application of the hydrogel-based flexible strain sensor in the field of human motion detection and information transmission shows the great potential of wearable devices, electronic skin, and information encryption transmission.

An Electrochemical Sensor Based on Au/rGO/GaN Porous Layer for Dopamine Determination

Dopamine (DA) is a biomarker that plays an important regulatory role in human body. In this paper, a Au/rGO/PGaN electrochemical sensor was fabricated by electrodeposition of reduced graphene oxide (rGO)and gold nanoparticles on GaN porous layer（PGaN）, which was grown by metal organic chemical vapor deposition (MOCVD). The composition and structure of the Au/rGO/PGaN electrode was characterized by scanning electron microscopy (SEM)．The sensing performance of the Au/rGO/PGaN electrode on DA was investigated using cyclic voltammetry and chronoamperometry. The sensor can detect dopamine in the range of 0.5-400μmol/L, and the detection limit of DA is 0.15μmol/L. In addition, the Au/rGO/PGaN electrode has good stability and repeatability, high sensitivity and wide detection range.

An ultrasensitive photoelectrochemical biosensor based on AgBiS2/CdS photoanode and multiple signal amplification strategy for the detection of dibutyl phthalate plasticizer

Herein, a novel AgBiS2/CdS heterojunction was developed for the construction of sensitive biosensor for dibutyl phthalate (DBP) detection. Compared with the pristine CdS, the AgBiS2/CdS heterojunction exhibited enhanced photocurrent because of the promoted photo-carriers transfer due to the matched energy band arrangement between AgBiS2 and CdS. Based on this AgBiS2/CdS photoanode and a signal amplification strategy integrates DNAzyme-assisted walker reaction and hybridization chain reaction, a sensitive PEC sensing platform was designed for the detection of DBP. A wide detection ranges from 1 fM to 10 nM and a low detection limit of 0.3 fM were achieved. The proposed PEC biosensor with satisfactory sensitivity, selectivity, and stability shows potential application in environmental monitoring.

A sensitive NH3 chemiresistive sensor with wide detection range: Employing a MOF-derived mesoporous carbon composite with polyaniline

Designing sensing materials with effective porous structure and compositions is a crucial strategy for constructing high-performance gas-sensitive devices. Herein, a dodecahedral mesoporous carbon derived from metal-organic frameworks (CMOF), e.g. Zeolitic Imidazolate Framework-8 (ZIF-8) derived porous carbon (ZIF-8-C) was prepared, and subsequently, three-dimensional (3D) hollow dodecahedral ZIF-derived carbon-polyaniline (PANI) based (ZCPx, x representing the mass fraction of ZIF-derived carbon) hierarchical hybrid materials were constructed by introducing protonated polyaniline on the surface of MOF carbon via in-situ oxidative polymerization. The MOF-derived structure provides a substantial interface surface area for the hybrid material, enabling rapid adsorption and charge transfer, along with essential structural stability. The 3D hollow ZCP50 hybrid material prepared exhibits a wide detection range (0.1–500 ppm), repeatability, acceptable long-term stability, and an 8.3 times response enhancement versus PANI. The above performance is attributed to the significant synergistic effect between ZIF-8-C and PANI. The unique design of this 3D framework holds promising potential for the commercial application of room-temperature gas sensors.

Microfluidic Immunosensor Platform for Sensitive Detection of Human Epidermal Growth Factor Receptor-2 Based on Enhanced Cathode Electrochemiluminescence of Bimetallic Nanoclusters.

In this work, a microfluidic immunosensor chip was developed by incorporating microfluidic technology with electrochemiluminescence (ECL) for sensitive detection of human epidermal growth factor receptor-2 (HER2). The immunosensor chip can achieve robust reproducibility in mass production by integrating multiple detection units in a series. Notably, nanoscale materials can be better adapted to microfluidic systems, greatly enhancing the accuracy of the immunosensor chip. Ag@Au NCs closed by glutathione (GSH) were introduced in the ECL microfluidic immunosensor system with excellent and stable ECL performance. The synthesized CeO2-Au was applied as a coreaction promoter in the ECL signal amplification system, which made the result of HER2 detection more reliable. In addition, the designed microfluidic immunosensor chip integrated the biosensing system into a microchip, realizing rapid and accurate detection of HER2 by its high throughput and low usage. The developed short peptide ligand NARKFKG (NRK) achieved an effective connection between the antibody and nanocarrier for improving the detection efficiency of the sensor. The immunosensor chip had better storage stability and sensitivity than traditional detection methods, with a wide detection range from 10 fg·mL-1 to 100 ng·mL-1 and a low detection limit (LOD) of 3.29 fg·mL-1. In general, a microfluidic immunosensor platform was successfully constructed, providing a new idea for breast cancer (BC) clinical detection.

Synthesis of AgInS2 quantum dots for metronidazole detection in eggs using a fluorescence-quenched probe

Metronidazole (MNZ) is a type of nitroimidazole antibiotic widely used in livestock feed. The extensive use, overuse, and misuse of MNZ have resulted in high levels of MNZ residues in animal products, posing serious health risks to people. Based on the effective fluorescence quenching capability of MNZ, a highly precise technique characterized by low-cost materials, low detection limit, and simple operational procedure was established to detect MNZ in eggs by modulating the fluorescence produced by AgInS2 quantum dots (AIS QDs). The performance of the prepared sample was outstanding as the linear range was 0.25–80.00 μg/mL with a detection limit (LOD) of 0.166 μg/mL and R2 = 0.9996, having an average recovery of MNZ in egg white ranged from 94.88 % to 102.39 %. This detection method has the advantages of a wide detection range, high sensitivity, high accuracy, excellent selectivity, and simple operability, and it can be used to detect MNZ in eggs after further study. The fluorescence quenching mechanism of AIS QDs by MNZ is speculated as a dynamic quenching mechanism of light-induced electron transfer.

Electrochemical Immunoassay for Capturing Capsular Polysaccharide of Burkholderia pseudomallei: Early Onsite Detection of Melioidosis.

This study presented the detection and quantification of capsular polysaccharide (CPS) as a biomarker for the diagnosis of melioidosis. After successfully screening four monoclonal antibodies (mAbs) previously determined to bind CPS molecules, the team developed a portable electrochemical immunosensor based on antibody-antigen interactions. The biosensor was able to detect CPS with a wide detection range from 0.1pg/mL to 1 μg/mL. The developed biosensor achieved high sensitivity for the detection of CPS spiked into both urine and serum. The developed assay platform was successfully programmed into a Windows app, and the sensor performance was evaluated with different spiked concentrations. The rapid electro-analytical device (READ) sensor showed great unprecedented sensitivity for the detection of CPS molecules in both serum and urine, and results were cross-validated with ELISA methods.

Ultrasensitive detection of chlortetracycline in animal-origin food using molecularly imprinted electrochemical sensor based on SnS2/ZnCo-MOF and AuNPs

The chlortetracycline (CTC) residue in food poses a threat to human health. Therefore, developing sensitive, convenient and selective analytical methods for CTC detection is crucial. This study innovatively uses tin disulfide/bimetallic organic framework (SnS2/ZnCo-MOF) nanocomposites in conjunction with gold nanoparticles (AuNPs) to co-modify a glassy carbon electrode (GCE). Further, a molecularly imprinted polymer (MIP)-based electrochemical sensing platform Au-MIP/SnS2/ZnCo-MOF/Au/GCE (AZG) was fabricated for selective CTC detection. SnS2/ZnCo-MOF enhanced the stability and surface area of the AZG sensor. The presence of AuNPs facilitated electron transport between the probe and the electrode across the insulating MIP layer. The fixation of AuNPs and MIP via electropolymerization enhanced the selective recognition of this sensor and amplified its output signal. The AZG sensor demonstrated a wide linear detection range (0.1–100 μM), low detection limit (0.072 nM), and high sensitivity (0.830 μA μM−1). It has been used for detecting CTC in animal-origin food with good recovery (96.08%–104.60%).

Enzyme-free and label-free detection of HER2 in human serum based on Ag+-released hybridization chain reaction signal amplification

The overexpression of human epidermal growth factor receptor 2 (HER2) has been linked to aggressive breast cancer and worse clinical outcomes. However, accurately measuring HER2 remains challenging, due to its low serum content. Herein, we developed a novel method for HER2 detection in serum by the combination of aptamer with C-Ag+-C structure, Ag+-released hybridization chain reaction (Ag+-HCR) and coprecipitation of Ag+ and gold nanoparticles (AuNPs) in the solution including Eosin Y (EY) and AgI colloids. Following the aptamer bound to HER2, signal amplification occurred through the release of numerous Ag+ by Ag+-HCR. This process subsequently induced AuNPs aggregation on the surface of AgI colloids, resulting in reduced fluorescence intensity of EY in the supernatant. The reduced value of EY fluorescence intensity in the supernatant was proportional to the level of HER2. Under optimized reaction conditions, a wide detection range was obtained between 0.09 and 9000 pg/mL with a limit of detection of 11.7 fg/mL in diluted human serum, and 96 serum samples in a 96-well plate could be measured simultaneously by a microtiter plate reader within 2 h. Moreover, the quantitative results of HER2 were consistent with those obtained using the enzyme-linked immunosorbent assay kit (r = 0.9995). Therefore, leveraging the delicate design of Ag+-HCR signal amplification, this enzyme-free, label-free, and effective method has demonstrated to be capable of detecting HER2 in serum due to its high sensitivity. Remarkably, this method may be extended to detect other cancer-related proteins and genes by replacing the corresponding target sequences.

MOF-derived yolk-shell CoN/Co-NC@SiO2 nanozyme with oxidase mimetic activities for colorimetric detection of glutathione

The development of nanozymes has garnered significant attention in biosensing applications owing to their exceptional catalytic properties and structural tunability. Herein, we present a yolk-shell nanozyme derived from metal-organic frameworks (MOFs) featuring CoN/Co-NC@SiO2 architecture, exhibiting remarkable oxidase mimetic activities for colorimetric glutathione (GSH) detection. The synthesis involves a facile pyrolysis process of cobalt-based MOFs encapsulated within a silica shell, resulting in a unique yolk-shell nanostructure with CoN/Co-NC active sites. Yolk-shell CoN/Co-NC@SiO2 has been studied in detail as an oxidase and catalase-like nanozyme. In consideration of structural and composition modulation, including hydrophilic SiO2 shell, the unique cavity, a high specific surface area and dispersed active sites, the CoN/Co-NC@SiO2 was proposed for colorimetric detection of glutathione with its oxidase-like activities. Based on the oxidation of 3,3′,5,5′-tetramethylbenzidine (TMB) by CoN/Co-NC@SiO2, a wide linear detection range of 0.5–60 μM as well as a lower detection limit of 0.054 μM were obtained. Our research shows that optimizing structure and composition plays an important role in the construction of multiple-enzyme activity and offers bright potential applications of MOF-derived yolk-shell nanozymes in biosensing and medical diagnostics.

Rapid, on-site quantitative determination of mycotoxins in grains using a multiple time-resolved fluorescent microsphere immunochromatographic test strip

The label probe plays a crucial role in enhancing the sensitivity of lateral flow immunoassays. However, conventional fluorescent microspheres (FMs) have limitations due to their short fluorescence lifetime, susceptibility to background fluorescence interference, and inability to facilitate multi-component detection. In this study, carboxylate-modified Eu(III)-chelate-doped polystyrene nanobeads were employed as label probes to construct a multiple time-resolved fluorescent microsphere-based immunochromatographic test strip (TRFM-ICTS). This novel TRFM-ICTS facilitated rapid on-site quantitative detection of three mycotoxins in grains: Aflatoxin B1 (AFB1), Zearalenone (ZEN), and Deoxynivalenol (DON). The limit of detection (LOD) for AFB1, ZEN, and DON were found to be 0.03 ng/g, 0.11 ng/g, and 0.81 ng/g, respectively. Furthermore, the TRFM-ICTS demonstrated a wide detection range for AFB1 (0.05–8.1 ng/g), ZEN (0.125–25 ng/g), and DON (1.0–234 ng/g), while maintaining excellent selectivity. Notably, the test strip exhibited remarkable stability, retaining its detection capability even after storage at 4 °C for over one year. Importantly, the detection of these mycotoxins relied solely on simple manual operations, and with a portable reader, on-site detection could be accomplished within 20 min. This TRFM-ICTS presents a promising solution for sensitive on-site mycotoxin detection, suitable for practical application in various settings due to its sensitivity, accuracy, simplicity, and portability.

Integrated Firefighting Textile with Temperature and Pressure Monitoring for Personal Defense.

Although electronic textiles that can detect external stimuli show great promise for fire rescue, existing firefighting clothing is still scarce for simultaneously integrating reliable early fire warning and real-time motion sensing, hardly providing intelligent personal protection under complex high-temperature conditions. Herein, we introduce an "all-in-one" hierarchically sandwiched fabric (HSF) sensor with a simultaneous temperature and pressure stimulus response for developing intelligent personal protection. A cross-arranged structure design has been proposed to tackle the serious mutual interference challenge during multimode sensing using two separate sets of core-sheath composite yarns and arrayed graphene-coated aerogels. The functional design of the HSF sensor not only possesses wide-range temperature sensing from 25 to 400 °C without pressure disturbance but also enables highly sensitive pressure response with good thermal adaptability (up to 400 °C) and wide pressure detection range (up to 120 kPa). As a proof of concept, we integrate large-scalable HSF sensors onto conventional firefighting clothing for passive/active fire warning and also detecting spatial pressure and temperature distribution when a firefighter is exposed to high-temperature flames, which may provide a useful design strategy for the application of intelligent firefighting protective clothing.

Tube-Like Copper Cobalt Oxide Anchored with Multiwalled Carbon Nanotube Nanocomposite Modified Glassy Carbon Electrode for the Electrochemical Detection of Nilutamide

Developing a precise and effective method to detect Nilutamide (NIL) is essential due to its contamination of the environment, which poses significant risks to human health and the biosphere. In this study, we employed a simple hydrothermal technique to create a nanocomposite of CuCo2O4 (copper cobalt oxide) and multi-walled carbon nanotube (MWCNT), which was then anchored onto a glassy carbon electrode for NIL detection. Various spectroscopic techniques were employed to confirm the structure of the nanomaterial, and its electrochemical properties were examined using cyclic voltammetry, differential pulse voltammetry, and electrochemical impedance spectroscopy. The CuCo2O4/MWCNT nanocomposite-modified electrode exhibited a wide linear detection range from 0.01 to 170 μM, a high sensitivity of 1.50 μA μM−1 cm−2, a low detection limit of 0.01 μM, outstanding stability, repeatability, and practical applicability for NIL detection.

Resistive flexible strain sensor based on AgNWs-Gr-PDMS for wearable electronics

In order to obtain a flexible strain sensor with higher sensitivity, a resistive flexible strain sensor based on the AgNWs-graphene-PDMS sensitive layer is prepared in this paper. This paper presents the preparation of a flexible sensitive layer, the preparation and encapsulation of the flexible strain sensor, and the performance tests of the sensor prepared with AgNWs-graphene (AgNWs-Gr) mixtures at different concentrations. The test results indicate that the prepared sensor has a wide detection range with a maximum stretchable length of 118%. The flexible strain sensor prepared with the AgNWs-Gr mixture at a concentration of 5% has the highest sensitivity and the maximum strain sensitivity of up to 236. It also has good repeatability, stability, and rapid response, and it has been tested for practical applications. The results show that the flexible strain sensor has a broad application prospect in fields such as wearable devices and intelligent robots.