Wide Band Research Articles

Photocatalytic Performance of the BaSn-based Nanoscale Materials for the Organic Pollutants Enhanced by Sm (Er) Doping

Background: Sm (Er) doping is an effective strategy for enhancing the photocatalytic activity of the semiconductor photocatalysts for the degradation of organic pollutants. BaSnbased nanorods possess wide band gap energy, which limits the photocatalytic application. It is important to research the feasibility of the improved photocatalytic performance of the BaSnbased nanorods by doping with Sm (Er). Objective: The aim is to synthesize Sm (Er)-doped BaSn-based nanoscale materials through a simple hydrothermal process and research the photocatalytic performance of the Sm (Er)-doped BaSn-based nanoscale materials for the gentian violet degradation. Methods: Sm (Er)-doped BaSn-based nanoscale materials with a polycrystalline structure were synthesized through a simple hydrothermal process. The Sm (Er)-doped composites were analyzed by X-ray diffraction, electron microscopy, solid diffuse reflectance spectrum, X-ray photoelectron spectroscopy, photoluminescence, and electrochemical impedance spectroscopy. Results: Sm (Er) doping induces the morphological evolution of the BaSn-based nanoscale materials from the nanorods to irregular nanoscale particles. Sm (Er) in the doped BaSn-based nanoscale materials exists in the form of the cubic Sm2Sn2O7 and orthorhombic ErF3 phases. The band gap value is decreased with increasing the Sm (Er) dopant contents. Sm (Er)-doped BnSnbased nanoscale materials with the Sm (Er) content of 8wt.% have the lowest band gap and show the strongest light absorption ability. Compared with the un-doped BaSn-based nanoscale materials, the Sm (Er)-doped BnSn-based nanoscale materials exhibit higher photocatalytic activity for the gentian violet degradation. 8wt.% Sm-doped BnSn-based nanoscale materials show the highest photocatalytic activity for the degradation of the gentian violet. 20 mL gentian violet solution (concentration of 10 mg·L-1) can be totally degraded using 20 mg 8wt.% Sm-doped BnSnbased nanoscale materials under UV light illumination for 150 min. Conclusion: The enhanced photocatalytic activity of the Sm (Er)-doped BnSn-based nanoscale materials can be attributed to the decreased band gap, enhanced light absorption ability, and decreased recombination of the photo-generated electron-hole pairs.

Advanced Imaging of Total Knee Arthroplasty.

The prevalence of total knee arthroplasty (TKA) is increasing with the aging population. Although long-term results are satisfactory, suspected postoperative complications often require imaging with the implant in place. Advancements in computed tomography (CT), such as tin prefiltration, metal artifact reduction algorithms, dual-energy CT with virtual monoenergetic imaging postprocessing, and the application of cone-beam CT and photon-counting detector CT, allow a better depiction of the tissues adjacent to the metal. For magnetic resonance imaging (MRI), high bandwidth (BW) optimization, the combination of view angle tilting and high BW, as well as multispectral imaging techniques with multiacquisition variable-resonance image combination or slice encoding metal artifact correction, have significantly improved imaging around metal implants, turning MRI into a useful clinical tool for patients with suspected TKA complications.

Research on indoor and outdoor positioning switching algorithm based on improved PSO-BP

Aiming at the problems of poor positioning accuracy in the indoor and outdoor junction areas and the loss of positioning signals and discontinuous positioning results during the transition from the indoor area to the outdoor area, this paper proposes a machine learning method to solve the positioning problem in the indoor and outdoor junction areas and the switching problem of positioning methods. An indoor and outdoor positioning switching algorithm based on Particle Swarm Optimization-Back Propagation (PSO-BP) and BP neural network is designed. Through this algorithm, the position of the positioning tag can be judged independently and the coordinates of the positioning tag in the indoor and outdoor junction area can be predicted independently. The experimental results show that the accuracy of positioning area judgment based on PSO-BP neural network can reach 99.91%. The indoor and outdoor boundary area coordinates obtained by BP neural network prediction method are lower than the root mean square error of ultra wide band indoor positioning method and BDS positioning method. The algorithm model proposed in this paper effectively improves the positioning problem of the indoor and outdoor junction area and the positioning problem of the transition from the indoor area to the outdoor area, improves the positioning accuracy and positioning stability of the indoor and outdoor junction area, reduces the positioning cost, and has strong practicability.

Chirped Integrated Bragg Grating Design

We analyze the two classic methods for chirped Integrated Bragg Gratings (IBGs) in Silicon-on-Insulator technology using the transfer matrix method based on the effective refractive index (neff) technique, which translates the geometry of an IBG into a matrix of neff depending on the wavelength. We also implement a procedure that allows engineering of the chirped IBG parameters, given a required bandwidth (BW) and group delay (GD). Finally, a complementary method for designing chirped IBG is proposed, showing a significant improvement in the bandwidth of the device or a moderation in the variation of the geometrical parameters of the grating.

Low profile wide band high gain transmitarray antenna for Ku band applications

A wideband transmissive surface with identical slots on 15 × 15 unit cells proposes in this article. The high gain transmitarray antenna presents using Huygens' principle at 15 GHz. The transmitarray surface consists of trilayer H-shaped slots on the middle of four symmetric slots on the edges of the unit cells. The placed slots induce Huygens’ resonances at three frequencies, 13.5 GHz, 15 GHz and 16.7 GHz which is caused by electric and magnetic surface currents on the transmitarray surface. This makes a wide bandwidth for the antenna performance. 360° phase distribution is obtained by increasing the H-shaped slots legs. Since no dielectric substrate used between layers, the transmission coefficient is near 1 (0 dB) through the whole range. For experimental results, the trilayer artificial metallic surfaces with substrateless conductive slotted unit cells is fabricated. The test results presented the transmitarray antenna peak gain is measured 28.6 dB at operating frequency, 15 GHz. Ultra wide band antenna with 3 dB gain bandwidth of 30% and high aperture efficiency of 42.66%.

Density functional theory study of the electronic and optical properties of pentagraphyne nanotubes.

Pentagraphyne (PG-yne), a recently predicted two-dimensional (2D) carbon allotrope with appealing properties, has opened up possibilities for a wide range of applications. In this study, we investigate the structural, electronic, optical, and electrical transport properties of a novel one-dimensional (1D) system called pentagraphyne nanotubes (PG-yneNTs), formed by rolling a PG-yne sheet, using density functional theory (DFT) calculations. We design PG-yneNTs with diameters ranging from 6.94 Å to 13.62 Å and employ state-of-the-art theoretical calculations to confirm their energetic, dynamic, and thermodynamic stability. Our electronic band structure calculations reveal that all these nanotubes are wide indirect band gap semiconductors. Remarkably, PG-yneNTs exhibit superior optical properties, including high absorption coefficients and absorption spectra covering the visible regime of the electromagnetic spectrum, making them potential candidates for visible-light-driven photocatalysis and solar cells. Interestingly, both the electronic and optical band gaps increase with the diameter of the nanotubes. Additionally, the observation of negative differential resistance (NDR) phenomena in (4, 0) PG-yneNT suggests their potential applications in NDR devices such as fast switches, frequency multipliers, and memory devices.

Frequency-extended inverse design of transmission-type linear-to-circular polarization control metasurface based on deep learning

Due to the parameter range limitations of the training dataset, traditional inverse prediction network models can only predict structure parameters of the metasurface within a limited frequency range. When the given design targets exceed the prediction range of network models, the predicted results will not match the actual results. This paper proposes a frequency-extended inverse design method (FEIDM) based on deep learning to address the problem. The method can automatically collect the required data and train the network model based on the center working frequency of the design targets, thereby achieving accurate prediction of metasurface structural parameters and effectively reducing labor and computational costs. Taking the transmission-type linear-to-circular polarization control metasurface as an example, the unit cell of the metasurface is first established in the paper. The structural parameters and corresponding electromagnetic parameters are collected without changing the unit size of the metasurface, and an initial inverse prediction network model (IIPNM) is constructed. The research results indicate that its predictable center working frequency range is 3–5.5 GHz. Using the design concept proposed in this paper, a program is constructed, it can automatically achieve data collection, target extraction, network model training, and prediction. Four given design targets are predicted. Among them, the center working frequencies of the three design targets are outside the initial predictable range. The predicted results meet the requirements of the given target, verifying the effectiveness of the proposed scheme. Finally, a set of parameters is selected to fabricate, and the experimental results are consistent with the simulation results. The research results can provide a reference for the efficient prediction of metasurface structural parameters over a wide frequency band.

Operation of colpitts oscillator based on wide band gap operational amplifiers

Operation of colpitts oscillator based on wide band gap operational amplifiers

Application of three-dimensional ultrasound technique in repairing dorsal foot wounds with medial sural artery perforator flaps

To investigate the accuracy of positioning perforator of medial sural artery with three-dimensional ultrasound technique guided by a wide band linear matrix array volume transducer probe before operation, and the effectiveness of the flap design based on this in repairing the dorsal foot wounds. Between January 2019 and December 2022, 30 patients with skin and soft tissue defects of the dorsal foot were treated. There were 19 males and 11 females, with an average age of 43.9 years (range, 22-63 years). There were 12 cases of traffic accident injury, 15 cases of heavy crushing injury, and 3 cases of machine injury. The time from injury to hospitalization was 1-8 hours (mean, 3.5 hours). The wounds in size of 5 cm×3 cm to 17 cm×5 cm were thorough debrided and covered with vacuum sealing drainage dressing. Then the wounds were repaired with the medial sural artery perforator flaps after no obvious infection observed. To obtain the complete three-dimensional image, the number and position of the medial sural artery perforator branches and the position of the main blood vessels in the muscle were detected and recorded by wide band linear matrix array volume transducer probe before operation. Suitable perforating branches were selected to design the flap and guide the flap incision on this basis. The size of the perforating flap ranged from 6 cm×4 cm to 18 cm×6 cm. The sensitivity and positive predictive value were calculated by comparing preoperative exploration with intraoperative observation of perforating branches, so as to evaluate the positioning accuracy of three-dimensional ultrasound technique. The donor sites were sutured directly in 25 cases and repaired with free skin grafting in 5 cases. The 60 perforating branches of medial sural artery were found before operation and 58 during operation in 30 patients. Among them, pre- and intra-operative perforations were consistent with 56. The sensitivity was 93.3% and positive predictive value was 96.6%. The intramuscular position and route of the main blood vessels were basically consistent with the pre- and intra-operative observation. All flaps survived and wounds healed by first intention. All incisions at the donor sites healed by first intention, and all skin grafts survived. All patients were follow up 9-24 months (mean, 14.7 months). The appearance, color, and texture of the flaps were good, and no obvious effect on wearing shoes and walking. At last follow-up, the American Orthopaedic Foot and Ankle Society (AOFAS) ankle-hind score ranged from 80 to 92, with an average of 87.5. The patient satisfaction was excellent in 29 cases and good in 1 case. The three-dimensional ultrasound technique guided by the wide band linear matrix array volume transducer probe can accurately locate the perforating branch of the medial sural artery, and the three-dimensional imaging is more intuitive, which can be used to guide the design and incision of the medial sural artery perforator flap.

Two Mixed Alkali Metal Isocyanurates with Wide Band Gap and Giant Birefringence

Two Mixed Alkali Metal Isocyanurates with Wide Band Gap and Giant Birefringence

Design and simulation of a compact plasmonic photonic crystal fiber filter with wide band and high extinction ratio

In order to realize the performance optimization and function expansion of modern all-optical systems, this work presents a compact plasmonic photonic crystal fiber (PCF) filter, using finite element tool. The deposited gold and graphene layers within the elliptical pores interact with the transmitted light, creating surface plasmon resonance (SPR) effect that amplifies the energy difference between x- and y-polarized light greatly. The simulation results indicate that the structural parameters are configured with the cladding holes' diameter of 0.6 μm, the large-holes’ diameter of 1.2 μm, the inner small-holes’ diameter of 0.2 μm, the lattice constant of 2.0 μm, the elliptical holes' minor axis length of 0.45 μm, the elliptical holes' major axis length of 1.30 μm, the gold layer thickness of 50 nm, and the graphene layer thickness of 20 nm, the central wavelength of the proposed PCF filter is 1.56 μm. When the length of this PCF filter is 1 mm, a maximum extinction ratio (ER) of 133 dB, an operating bandwidth exceeding 800 nm, covering two common communication windows of 1.31 μm and 1.55 μm, as well as a low insertion loss (IL) of 0.59 dB can be achieved. What's more, the feasibility of fabricating the device is also examined. This filter with compactness, broadband and high-extinction demonstrates promising applications in optical communication, optical sensing, optical computing, and various other fields.

Triple band diamond-shaped polarization insensitive plasmonic nano emitter for thermal camouflage and radiative cooling

This study proposes the design of a novel Metal-Insulator-Metal (MIM) nano-infrared emitter that uses a unique diamond-shaped grating to achieve selective infrared absorption. Diamond-shaped nano emitter (DNE) structure exhibits four narrow resonant peaks within key absorption windows such as short-wave infrared (SWIR) mid-wave infrared (MWIR), alongside with a wide absorption band in the Non-Transmissive Infrared Range (NTIR) for thermal camouflage applications compatible with radiative cooling. Moreover, the proposed DNE is polarization insensitive as it has an in-plane symmetric design. Using the 3D Finite-Difference Time-Domain (FDTD) simulations, we demonstrate the nanoantenna’s superior performance characterized by its high absorption rates and tuned effective impedance matching. As of our knowledge, the findings suggest that this is the first time that a MIM structure achieved multiple narrow resonance peaks, located in SWIR and MWIR simultaneously, with a wide absorption range in NTIR. Represented DNE stands as a significant innovation in the field of stealth technology, providing a tunable, high-efficiency solution for managing and controlling thermal emissions across diverse applications.

Investigation of crystalline and band alignment properties of NiO/GaN and Ni0.5Co0.5O/GaN heterojunctions using synchrotron radiation based techniques

Epitaxial layers of NiO and Ni0.5Co0.5O have been deposited on GaN templates using RF magnetron sputtering deposition technique. The epitaxial relationship in out-of-plane and in-plane directions for NiO and Ni0.5Co0.5O layers with respect to GaN is [111]NiO(Ni0.5Co0.5O)∥[0001]GaN and [1̅10]NiO(Ni0.5Co0.5O)∥[1̅21̅0]GaN, respectively. The epi-layers are found to have two triangular domain structures oriented along [111] direction with an in-plane rotation of 60° with respect to each other. Photoelectron spectroscopy (PES) has been used to determine the valence band offset (∆EV) and the band alignment at the heterojunctions (HJs). The ∆EV at NiO/GaN and Ni0.5Co0.5O/GaN HJs are 1.2 ± 0.2 eV and 1.8 ± 0.2 eV, respectively. The conduction band offsets (∆EC) have also been estimated using the determined values of optical band gap (NiO: Eg = ∼ 3.5 eV; Ni0.5Co0.5O: Eg = ∼ 3.3 eV) from optical transmission measurements. The values of ∆EC are found to be 1.5 ± 0.2 eV and 1.9 ± 0.2 eV at NiO/GaN and Ni0.5Co0.5O/GaN HJs, respectively. A type-II band alignment is observed at both the HJs. Higher values of valence band and conduction band offsets are observed at Ni0.5Co0.5O/GaN HJ in comparison to NiO/GaN. These experimentally determined values of band offsets can be used to design wide band gap HJ based devices like photodetectors, where higher values of band off-set at the Ni0.5Co0.5O/GaN HJ can be utilized to confine the carriers.

Laser speckle rheological microscopy reveals wideband viscoelastic spectra of biological tissues.

Viscoelastic transformation of tissue drives aberrant cellular functions and is an early biomarker of disease pathogenesis. Tissues scale a range of viscoelastic moduli, from biofluids to bone. Moreover, viscoelastic behavior is governed by the frequency at which tissue is probed, yielding distinct viscous and elastic responses modulated over a wide frequency band. Existing tools do not quantify wideband viscoelastic spectra in tissues, leaving a vast knowledge gap. We present wideband laser speckle rheological microscopy (WB-SHEAR) that reveals elastic and viscous response over sub-megahertz frequencies previously not investigated in tissue. WB-SHEAR uses an optical, noncontact approach to quantify wideband viscoelastic spectra in specimens spanning a range of moduli from low-viscosity fibrin to highly elastic bone. Via laser scanning, micromechanical imaging is enabled to access wideband viscoelastic spectra in heterogeneous tumor specimens with high spatial resolution (25 micrometers). The ability to interrogate the viscoelastic landscape of diverse biospecimens could transform our understanding of mechanobiological processes in various diseases.

Greatly Enhanced Radiative Transfer Enabled by Hyperbolic Phonon Polaritons in α‐MoO3

AbstractOrthorhombic molybdenum trioxide (α‐MoO3) is a highly anisotropic hyperbolic material in nature. Within its wide Reststrahlen bands, α‐MoO3 has hyperboloidal dispersion that supports bulk propagation of high‐k phonon polariton modes. These modes can serve as energy transport channels to greatly enhance radiative heat transfer inside the material. In this work, large radiative transfer enabled by phonon polaritons in α‐MoO3 is demonstrated. The study first determines the temperature‐dependent permittivity of α‐MoO3 from polarized Fourier‐Transform Infrared (FTIR) spectroscopy measurements and then uses a many‐body radiative heat transfer model to predict the equivalent radiative thermal conductivity of hyperbolic phonon polariton. Contribution of radiative transfer to the total thermal transport is experimentally determined from the Time‐Domain Thermoreflectance (TDTR) measurements in a temperature range from −100 to 300 °C. It is found that radiative transfer can account for ≈60% of the total thermal transport at a temperature of 300 °C. That is, conductive thermal transport is enhanced by >100% by radiative transfer, or radiation inside α‐MoO3 is greater than that of conduction. These additional energy pathways will have important implications in thermal management in new materials and devices.

Feasibility studies in applying cork to pile-type two-layered seismic metamaterials

Seismic metamaterials, a novel seismic engineering technology composed of multiple layers of materials, can form barriers by being periodically arranged to protect properties in a region from earthquake disasters. Parametric analysis of pile-type two-layered seismic metamaterials reveals that the outer layer material with low Poisson's ratio, low Young's modulus, and low density can achieve low and wide frequency band gap, aligning with the design objectives of seismic metamaterials. Since cork, a readily available material, meets the above characteristics, this study aims to investigate its feasibility in being applied to pile-type two-layered seismic metamaterials. Furthermore, the effect of hollows within pile-type seismic metamaterials on lowering the bound frequency of the band gaps is explored. Through laboratory-scale tests at one-fifth scale and numerical simulation, it is demonstrated that cork pile-type seismic metamaterials without hollows can generate a low and wide frequency band gap and effectively attenuate waves at frequencies ranging from 5.6 Hz to 10 Hz. In addition, employing hollows in the cork outer layer can further decrease the lower bound frequency of the band gap by 25 % and result in an effective attenuation range of 4.6 Hz–9.8 Hz while slightly reducing the width of the band gap.

Ultrathin Bi‐Switchable Vanadium Dioxide‐Based Multifunctional Metamaterial for Terahertz Polarization Modulation

AbstractA broadband multi‐functional bi‐switchable ultrathin optical metamaterial design is investigated, which can achieve a high polarization conversion efficiency over a wide band of frequencies in the terahertz (THz) regime. The proposed design switches from a linear and circular polarization converter (LPC/CPC) to an efficient absorber by using the phase change property of a functional material, vanadium dioxide (VO2). The proposed design shows switching from an absorber to a reflector using the mechanical configuration of the functional material, and therefore the design can be used as a bi‐switchable device. The first type of switching is accomplished by changing the conductivity of the functional material, while the second type of switching is achieved with the help of the mechanical configuration of the functional material. Moreover, the structure is responsive to wide incident angles. The proposed switchable design has the potential to contribute to the development of tunable polarization rotating devices and on/off switching LPC devices, which have wide applications in detection, sensing, and communications.

Mechanical and vibrational behaviors of bilayer hexagonal boron nitride in different stacking modes

Hexagonal boron nitride (h-BN) is a semiconductor material with a wide band gap, which has great potential to serve as a nanoresonators in microelectronics and mass and force sensing fields. This paper investigates the mechanical properties and natural frequencies of bilayer h-BN nanosheets under five different stacking modes, which have been rarely studied, using molecular dynamics simulations. The mechanical properties, including Young’s modulus, the ultimate stress, ultimate strain, Poisson’s ratio and shear modulus, are studied for all five stacking modes. And the effects of strain rate, crystal orientation and temperature to bilayer h-BN nanosheets’ tensile properties have also been studied. Our findings suggest that bilayer h-BN nanosheets are basically an anisotropic material whose tensile properties vary substantially with stacking modes and temperature. Moreover, the natural frequencies are proposed in an explicit form based on the nonlocal theory. The differences of the fundamental natural frequencies among different stacking modes are affected by the constraint condition of bilayer h-BN sheet. The theory results match well with the simulation results. These findings establish elementary understandings of the mechanical behavior and vibration character of bilayer h-BN nanosheets under five different stacking modes, which could benefit its application in advanced nanodevices.

PMRNA: Parameter matching of realtime and non‐realtime applications for resource provisioning in fog‐integrated cloud

SummaryFog computing, an emerging technology, extends Cloud computing services to the network's edge in the proximity of the application request. This extension yields improvement in Bandwidth (BW) utilization, faster responses to Real‐Time (RT) and Internet of Things (IoT) requests, and the provision of the heterogeneous resource services. While extensive work has been conducted on resource allocation for RT and Non‐Real‐Time (NRT) requests separately in Fog as well as Cloud computing, there is limited focus on resource provisioning for mixed RT and NRT requests in the Fog‐integrated Cloud (FiC) environment. Moreover, the majority of the existing provisioning methods primarily consider parameters from the system's perspective, overlooking crucial user aspects such as deadline and request size. To address the gap, this work introduces a resource provisioning method named “Parameter Matching of Realtime and Non‐Realtime Applications (PMRNA),” which considers user parameters and resource information, gathered by the broker. The performance evaluation of the proposed model is done in CloudSim, using various combinations of RT and NRT requests along with diverse Fog and Cloud resource configurations. Evaluation metric includes average Execution Time (ET), average Waiting Time (WT), average Turn Around Time (TAT), and resource utilization. The experimental results demonstrate a significant reduction in both average WT and average TAT for the diverse pool of RT and NRT requests in the FiC compared to the Cloud‐only environment.

An analytical model of P+ SiC core-shell JLFETs to analyze the performance for higher breakdown voltages applications

In this article, we proposed a core-shell (CS) architecture that uses the silicon carbide (SiC) as a nanowire for higher breakdown voltages in a Junctionless field effect transistor (JLFET). The P+ core-shell improves the electrostatic integrity and reduces lateral band-to-band tunneling in SiC JLFET. Furthermore, the SiC is wide band gap material which helps to achieve the full volume depletion in JLFET at such short channel lengths. Thus, the OFF-state current in P+ SiC CS JLFET has reduced to 10−16 μA even at temperature 600 K and VDS = 2.0 V. The P+ SiC CS JLFET shows significant performance even at higher drain voltages. Hence, we investigate the P+ SiC CS JLFET for higher breakdown voltages with the impact of higher temperatures. In addition, the impact of higher drain voltages with higher temperatures is also examined. This paper presents an analytical model for P+ SiC CS JLFETs which considers Poisson's equation for nanowires as well as the surface potential at the threshold voltage (Vth) and electric field at the zero point (Ez). The model shows that the surface potential and the electric fields in nanowires are essential for an accurate estimation of the drain current. In addition to the numerical modeling results provided by SILVACO TCAD, the performance of the proposed analytical model was compared with simulation results. The results showed good agreement between the simulations and the proposed compact model. This indicates that the proposed model can be used to provide accurate drain current predictions in nanoscale transistors.