Whole Wheat Flour Research Articles

Use of the 1H NMR technique to describe the kneading step of wholewheat dough: The effect of kneading time and total water content

The kneading step of wholewheat flour (WWF) dough was monitored using low-resolution 1H nuclear magnetic resonance (NMR). The tested variables were kneading time and total water content. Two 1H Free induction decay (FID) (A and B) and four 1H T2 Car-Purcell-Meiboom-Gill (CPMG) (C, D, E and F) proton populations were observed and the attribution to the different proton domains was made based on the literature and data acquisition. Kneading time significantly increased the mobility and the relative abundance of popA, the relative abundance and strength of protons of popC, D and E, while significantly reducing the relative amount of popF and increasing its mobility. This evolution of the proton populations during kneading was interpreted as chemical/physical transformations of the flour constituents. The use of WWF may reveal the changes in molecular dynamics underlying the higher water requirements of unrefined doughs, often associated with improved bread quality.

Understanding whole-wheat flour and its effect in breads: A review.

Although the consumption of whole grains, including bread made with whole-wheat flour, is promoted for health benefits and reduced risk for disease and mortality, consumer acceptance, and consumption of some whole-wheat products is low compared to that of white breads. This review focuses on the understanding of whole-wheat flours, both their positive and negative aspects, and how to improve those flours for the production of whole-wheat breads. The review addresses genetic aspects, various milling systems, and pretreatment of bran and germ. The baking process and use of additives and enzymes may also improve product quality to help consumers meet dietary recommendations for daily whole-wheat consumption.

Rheological characteristics of wheat-chickpea composite flour doughs and effect of Amla powder (Phyllanthus emblica L.) addition on the functional properties of bread.

Bread is a staple food for majority of the people worldwide, but it has a high glycemic effect. Substituting wheat flour partly with chickpea flour and the presence of bran is suggested to improve the glycemic effect of bread; however, the non-gluten substances in wheat flour adversely affect dough rheology. The addition of amla powder was tested on the rheological properties of wheat-chickpea flour composite doughs; also, the physical and sensory qualities of bread made thereof. The results showed that when the level of replacement of refined white flour (WF) or whole wheat flour (WWF) with chickpea flour was increased from 0 to 40%, it significantly affected the rheological properties and functionality of dough. A decreased farinograph water absorption, higher mixing tolerance index (i.e., weakening of dough), decreased resistance to extension, and lower ratio numbers were obtained with some differences between WF and WWF at the higher level of chickpea flour substitution. The addition of amla powder to WF: chickpea flour (60:40) blends reduced the angle of ascending (from 7.0 ± 0.7 to 6.0 ± 0.7) and angel of descending (from 3.2 ± 0.21 to 2.4 ± 0.2), indicating the slight tightening of gluten leading to dough breakdown. The addition of amla powder improved the mixing characteristics of the composite flour doughs, as well as the physical and sensory qualities of the bread. In conclusion, amla powder can help overcome the deleterious impact of adding chickpea flour to WF or WWF for producing good quality pan bread for people with type-2 diabetes.

Development of multigrain chapatti with spices mix to enhance the nutritional values and their storage study.

The present investigation was carried out to study the effect of various levels of various multigrain viz., finger millet, pearl millet and fenugreek powder on chapatti (Multigrain chapatti with spices). The multigrain powders were blended in whole-wheat flour along with spices and chapatti flour mixes were prepared. Chapatti composite flour was evaluated for proximate analysis, colour, rheological (viz, amylographic and farinographic) properties and compared with control wheat flour chapatti. Farinograph properties showed that in general dough development time increased in the composite flours. The pasting temperature, peak viscosity, hot paste viscosity, cold paste viscosity, breakdown, setback values were influenced by the addition of other grain flour to wheat flour. The chapatti was evaluated for proximate composition viz. moisture, ash, alcoholic acidity, protein, fat, dietary fiber, carbohydrate, calorific values; sensory analysis, colour determination, texture and microbial analysis. Chapatti prepared with composite flour with finger millet, pearl millet and fenugreek powder were found to be superior over the control chapatti sample. Storage studies of chapatti were carried out for a period of one month at room temperature 25 ± 2°C and freezer at 4°C and were found to be suitable for consumption and palatable with desirable characteristics of sensory, texture, appearance, colour and aroma.

Anaerobic Digestion of Mycotoxin-Contaminated Wheat: Effects on Methane Yield and Contamination Level

In this study, biogas and biomethane production during mesophilic anaerobic digestion of wheat substrates coming from national crops and naturally contaminated with deoxynivalenol (DON) and/or T-2/HT-2 toxins was investigated. Biochemical methane potential (BMP) tests of both wholewheat flour and of the main milling fractions were carried out to assess the effect on the concentration of mycotoxins on the anaerobic biological process and their residual presence in the final digestate. The good methane average production achieved (337.0 ± 24.5 NL CH4/kg VS) was substantially comparable with the yields gained from similar biomasses at mesophilic conditions. Moreover, an effective reduction (60.7–100%) of DON concentration was obtained in all the tested substrates (range of contamination in the samples, 368–12,916 μg/kg) whereas the sum of T-2 and HT-2 toxin levels in digestates was always <LOQ in all substrates analyzed (range of contamination in the samples, 5–65 μg/kg). The results supported an alternative exploitation of “non-compliant” lots of cereals destined for human consumption and/or animal feed which could represent a concrete benefit for agricultural producers. Anaerobic digestion could be employed as an effective tool to recover large amounts of trichothecene-contaminated cereals in an environmentally and economically sustainable way.

Extending the Shelf-life of Whole-wheat Flour by Gamma Irradiation and Organoleptic Characteristics of Cakes Made with Irradiated Flour

Background: Extending the shelf-life of food products is very important for food producers, and one of its most significant methods is gamma irradiation. Objective: The aim of this study is to evaluate extending the shelf-life of whole-wheat flour using gamma irradiation and to study the organoleptic and physical characteristics of the cakes made with irradiated flour. Methods: 900 g packed flour samples were irradiated with different doses of 0.2, 0.5, 2 and 5 kGy of gamma irradiation using Caesium-137 source. Results: Based on the results, insect growth was not observed in any of the irradiated flour samples up to 180 days after production. The total number of bacteria and the number of mold and yeast significantly reduced during 180 days of storage. With increasing the irradiation dose, the height of the baked cakes was significantly reduced, the size of the air bubbles inside the cake decreased, and the color of the cakes became darker so that a dark and different color was observed at a dose of 5 kGy. Conclusion: By applying a dose of 5 kGy irradiation, the shelf-life of flour can be longer, with inconsiderable organoleptic changes of baked cakes.

Characterization of Whole Wheat Bread Reformulated with Pea and Soy Protein Isolates

Aims: At present, there is an increasing demand for plant-based proteins due to their nutritional values and beneficial effect to the environment. Improving the availability of plant protein enriched foods would be highly beneficial for the consumers to follow a healthy diet. Reformulating a commonly consumed product, such as bread, with plant-based protein will be a convenient option for the people to improve their protein intake. Therefore, the objective of this study was to determine the effect of protein isolate (pea and soy) on color, microscopic structure, sensory properties, and protein content in whole wheat bread. Methods: The experiments were conducted at the University of Guelph, ON, Canada. Seven whole wheat bread samples (control, P20, P30, P40, S20, S30 and S40) were prepared (n = 3 loaves for each treatment). Results: The RGB and L*a*b*values of loaf (crust) and slice (crumb) of the control bread was higher than that of all protein enriched bread samples. The control bread had larger pores than the protein enriched samples. The pores in the pea protein isolate enriched bread were tightly packed while compared to soy protein. There was no difference in most of the sensory attributes between control and S20 breads. In terms of softness, all protein blended breads scored lower than the control. Fifty percentage of the panelists chose S20 as their first choice, whereas only thirty percent selected control as their first choice. The protein content of the bread samples was 8.9, 15.4, 18.1, 20.7, 15.9, 18.6 and 20.9%, for control, P20, P30, P40, S20, S30 and S40, respectively. Conclusion: Soy protein isolate has more opportunities than pea protein isolate to incorporate with whole wheat flour, and produce acceptable bread.

Nutritional Value Research of Spelt Pasta with Vegetable Additives

Health indicators of the population depend significantly on the food quality and nutritional value. Simple carbohydrates excess of and lack of protein, dietary fiber, vitamins, minerals, antioxidants and other physiologically active substances increase the risk of socially significant disease progress. The development and production of mass-consumed products with high nutritional and biological value, including affordable non-traditional raw materials use, are promising areas of the food industry development aimed at improving the nutritional status of the population. The article presents the research results on the developed Noodle products recipes from non-traditional raw materials that meet modern healthy nutrition requirements, intended for dietary treatment and dietary prevention of people with overweight / obesity. The research aimed at expanding the range of macaroni products with these characteristics. As the main raw material, a man selected whole-wheat flour – new spelt flour, and as additional raw materials – buckwheat flour, broccoli and celery powders. The researchers found that the introduction of macaroni products from buckwheat spelt, broccoli and celery powders into the recipe had a multidirectional effect, reducing or increasing various indicators of its nutritional value. The changes range did not affect the overall characteristics. The satisfaction degree of the average daily need for food substances and energy when consuming a portion of 100 g for each sample of developed Noodle products allows them to be classified as functional products that are protein and dietary fiber sources, according to the requirements of the TR CU 022/2011.

QUALITY CHARACTERISTICS OF TARHANA PRODUCED WITH DIFFERENT RATIOS OF WHOLE WHEAT AND BUCKWHEAT FLOUR

This study aimed to investigate physical, chemical and sensory properties of tarhana, produced by adding buckwheat flour with different ratios. Lightness (L*) value increased in wet samples according to the ratio of buckwheat flour increased, whereas it decreased in dry samples (P&amp;lt;0.05). Redness (a*) values decreased in wet samples whereas increased in dry samples. Yellowness (b*) values were higher in wet samples however it decreased with drying process (P&amp;lt;0.05). Buckwheat addition decreased viscosity values whereas protein and ash values increased significantly (P&amp;lt;0.05). The highest viscosity value was determined in dried control sample with 935cP, while the highest protein, ash, DPPH free radical scavenging activity and total phenolic content values were 15.83%, 3.56%, 161.82 (mg Teq/g) and 14.00 (mg GAE/g) respectively, detected in samples containing 100% buckwheat flour. The highest overall sensory evaluation scores were 5.00 and 7.55 determined in samples containing 25% whole wheat and 75% buckwheat flour (P&amp;lt;0.05), respectively.

Value addition and storage study of khakhra fortification with garden cress seed (Lepidium sativum)

Khakhra is a popular vegetarian roasted ‘Gujarati’ Indian thin cracker bread or snack item made from whole-wheat flour and oil. In present investigation efforts were made to prepare khakhra by using different proportions and variety of flours i.e. S0, S1, S2, S3, and S4. The study was carried out to find out the development of value added khakhra by using different levels of flours whole-wheat flour, garden cress seed and buckwheat flour. The khakhra was prepared by wheat flour with substituting garden cress seed and buckwheat flour by increasing proportional 10%, 20%,30% and 40%. The nutritional value like fat, protein and iron content increases with increase the proportion of composite flour. In conclusion substitution of whole-wheat flour with garden cress seed flour and buckwheat flour will be the good nutritional food for iron deficiency people. The storage studies was carried out by three month and chemical composition checked by 30 days time of interval in that 30, 60,90 days.

Functional Properties, Antioxidant Activity, and Organoleptic Quality of Novel Biscuit Produced by Moroccan Cladode Flour “Opuntia ficus-indica”

This study aimed to develop a novel biscuit by supplementing cladode flour (CF) into whole-wheat flour (WWF) at different proportions 0, 25, 50, 75, and 100%. Proximate analysis revealed that CF had a high amount of ash (11.9%) and dietary fiber (41.04%). Major minerals determined by ICP-MS were calcium (4.47 g/100 g); potassium (1.25 g/100 g); magnesium (1.46 g/100 g); and trace elements such as zinc (1.77 mg/100 g), copper (0.95 mg/100 g), and selenium (148.5 μg/100 g). The analysis of total phenolics, total flavonoids, and antioxidant activity showed high values (649.88 mg gallic acid equivalents (GAE)/100 g; 399.16 mg catechin equivalent (CE)/100 g; and 72.37%, respectively). HPLC was used to identify four phenolic acids (gallic, ferulic, syringic, and caffeic acids) and only one flavonoid (rutin) in cladode flour. Biscuit hardness, L∗, and a∗ color values decreased corresponding to the incorporation level of CF. Sensory evaluation showed that the substitution level (up to 25%) is ideal to prepare an acceptable bio-biscuit. Cladode flour could be very useful for the food industry as a source of bioactive compounds with technological potential and nutritional and antioxidant properties.

A study on physicochemical, antioxidant and microbial properties of germinated wheat flour and its utilization in breads.

Wheat is consumed worldwide because of its high nutritional content and convenience to form different products. Whole wheat is an important source of dietary fiber and its consumption is known to lower the risk of colon cancer, diabetes mellitus and cardiovascular disease. Germination of wheat results in better availability of nutrients and offers many health benefits. In this study, germinated wheat flour (GWF) was prepared and analyzed for its proximate composition, functional properties, antioxidant activity and microbial count along with whole wheat flour (WWF). The GWF was having 9.2% higher protein content than that of WWF. No significant change was observed in the ash, fat and crude fiber content after germination. GWF showed higher oil absorption capacity and water solubility index. Falling number of GWF was found to be lower. The total phenolic content increased more than two folds after germination and antioxidant activity increased from an initial of 12.35% in WWF to 33.28% in GWF. The microbial counts of GWF were within acceptable range for processing. Breads were prepared by replacing WWF with GWF at 0-100% levels and were analyzed for their proximate composition and acceptance on Hedonic Scale. The 100% GWF bread was having 8.7% higher protein content than 100% WWF bread. The overall acceptability score for all breads were high (> 7.3) whereas the bread prepared with 50% GWF got the highest overall acceptability score of 8.4. The results of this study indicate that bread with improved nutrition and acceptable quality can be prepared from GWF.

Formulation, development and evaluation of high fibre-high protein chapati (Indian flat bread) from composite flour using common industrial by-products.

Triple ground whole-wheat flour with 18.45% damaged starch was partially substituted by double sifted full-fat stabilised rice bran (SRB) and undamaged-stabilised-debitterised-wheat germ (USDWG) flour to produce high TDF (total dietary fibre), high protein flour for chapati. Five formulations, F1-5 with up to 15% SRB and 20% USDWG incorporations on weight basis were used for baking chapatis. The most sensorially and functionally acceptable formulation (F4), had 10% SRB and 15% USDWG, showed significant (P < 0.05) improvement in desired parameters viz. TDF increased 16.83 ± 0.06% to 18.59 ± 0.03%, crude protein from 14.43 ± 0.06 to 19.52 ± 0.10% and in vitro starch digestibility decreased 8.30 ± 0.10% to 7.55 ± 0.01% when compared to control chapati. Texture profiling and sensory analysis indicated F4 formulation had overall acceptable qualities than chapati made from control, commercial and target flours. Water was completely replaced by liquid whey during chapati making, which showed promising results; Formulation F5 (15% SRB and 20% USDWG) scored 20.2% TDF and 22.7% protein. The above findings are useful for developing TDF and protein dense, low GI functional food, utilizing common industrial by-products at 20% lesser cost.

Development of innovative technologies for whole-wheat flour products of different classes

Various ways of innovative technologies applying for the development of bread using whole-wheat flour of different wheat grades were investigated in this article. Cavitation and ion-ozone technologies were used as innovative technologies. Wheat grades III, IV and V, as well as off-grade wheat were used during the study. When determining the quality of wheat grains, the amino acid composition of proteins is of great importance. Therefore, the total amino acid composition of wheat samples was determined. Bread baking using innovative technologies was carried out on the basis of the Almaty Technological University. The photos of the obtained bread products using innovative methods from whole-wheat of different grades were given in the article. The resulting bread products were investigated by organoleptic, physico-chemical and some rheological indicators. According to the results obtained, the use of cavitation and ion-ozone processing plays a decisive role in assessing the quality of bakery products, and the wheat grade from which the bread was baked has also a significant effect. The obtained bread products in comparison with the control sample had higher organoleptic characteristics; for a number of physicochemical and organoleptic indicators, a sample of bread from whole-ground wheat of grade III appeared to have more favorable characteristics. According to the results of the research, it can be stated that the use of cavitation and ion-ozon processing, together with the targeted use of a certain wheat grade, can give more attractive results of the obtained bread products in comparison with the control sample.

Effect of Wholewheat Flour Particle Shape Obtained by Different Milling Processes on Physicochemical Characteristics and Quality of Bread

SUMMARYResearch backgroundWholewheat flour is a very good source of nutritional compounds and functional ingredients for human diet. However, it causes negative effect on bread quality. Different milling techniques can be used to obtain wholewheat flour, minimizing the negative effect of both bran and germ on bread quality. The aim of this work is to study the effect of particle size and shape of wholegrain flour on the interaction among the different components, water distribution, dough rheology and bread volume.Experimental approachWholewheat flour of three varieties (Klein Rayo, Fuste and INTA 815) was obtained in cyclonic, hammer and roller mills. The characteristics of wholewheat flour were explored, and the water distribution and rheological properties of dough were determined by thermogravimetric analysis and Mixolab test, respectively. Finally, microscale bread was prepared.Results and conclusionsThe amount of water-soluble pentosans, damaged starch and wet gluten was affected by the milling procedure. Regarding dough rheological properties, wholewheat flour obtained in hammer mill had the lowest water absorption capacity and the highest developing time. This result could be mainly attributed to particle shape in these samples with large amount of endosperm attached to the bran, hindering protein unfolding. Thermogravimetric analysis showed that both fine and large bran particle size seem to have the same effect on water properties in wholewheat dough during heating. Bread made with Klein Rayo variety had the highest specific volume, indicating that wheat with high protein content and breadmaking quality is needed to make wholewheat bread. The results of this work showed that particle shape, rather than particle size, affected the quality of wholewheat flour for breadmaking.Novelty and scientific contributionThe effect of milling type and particle shape of the wholewheat flour had a greater effect than the wheat variety. Thus, the wholegrain milling process should be carefully selected taking to account the shape of the produced particle. This may open new opportunities for developing wholewheat bread with better acceptance by consumers.

Deoxynivalenol content, phenolic compounds, and antioxidant activity of wheat flour after debranning process

Abstract: The objective of this work was to evaluate the effect of the debranning process on the deoxynivalenol (DON) content, phenolic compounds, and antioxidant activity of wheat flours, in order to determine which milling technology provides the safest and most nutritional wheat products. Grain samples from the BRS Marcante, BRS Reponte, and BRS 374 wheat (Triticum aestivum) cultivars were used to obtain both whole-wheat and white flours. For whole-wheat, grains were debranned at different times (20 and 40 s). The debranning process significantly reduced the DON content in the whole-wheat flours from all cultivars. The DON concentration decreased 22 and 28% in the 20 and 40 s debranning treatments, respectively, when compared with the treatment without debranning. In addition, phenolic compound content and antioxidant capacity are significantly higher in the whole-wheat flours. The debranning process contributes to the production of safer and healthier foods, by reducing DON content and retaining phenolic compounds and antioxidant activity in whole-wheat flours.

Whole-wheat flour particle size influences dough properties, bread structure and in vitro starch digestibility.

Whole-wheat flour (WWF) is increasingly popular because of the health benefits of whole grains. This study investigated the effect of WWF particle size on dough properties, bread quality and in vitro starch digestibility. WWF was made from intact whole grain directly. Three WWF particle sizes were examined, including coarse, medium and fine with a mean size of 1315, 450 and 199 μm, respectively. The dough made from WWF of a larger particle size exhibited lower extensibility and stability, and subsequently the bread had a more compact structure (i.e. lower open porosity and thicker cell thickness), smaller specific volume and harder texture, which were regarded as poor quality attributes. On the other hand, the bread made from the fine WWF exhibited a higher amount of released glucose than those made from the coarse and medium WWFs. Moreover, the particle size of bread bolus showed no significant effect on in vitro starch digestion. The whole study demonstrated that the particle size of WWF plays a critical role in determining both bread quality and digestibility.

Rheological and Sensory Attributes of Wheat, Quinoa and Buckwheat Composite Flour and their Use in Bakery Products

Pseudo cereals like Quinoa and Buckwheat are not true cereals because they have only structural and compositional resemblances with true cereals. These cereals are largely grown in all over the world. They are very important due to their excellent nutritional contents especially protein and bioactive components. Cookies were prepared by making composite flour of quinoa, buckwheat and wheat. Six treatments were prepared by adding 10%, 20% and 30% of quinoa flour with whole-wheat flour and buckwheat flour with whole-wheat flour along with controlled treatment To (100% wheat flour). Composite flours were analyzed for proximate, chemical and rheological properties. Cookies were subjected to sensory evaluation, chemical analysis, physical and textural analysis. Treatments such as 90% wheat flour + 10% buckwheat flour (T1 ), and 90% wheat flour + 10% quinoa flour (T4), showed best results in comparison with all other treatments. The cookies of treatment T1 and T4 for texture and color analysis showed best results as compared to other treatments. The proximate results of cookies showed that T1 and T4 contain 13.27%, 13.32% moisture content, 13.43%, 13.38% protein content, 22.12%, 30.08% fat content, 1.7%, 1.87% crude fiber and 1.01%, 1.19% ash content respectively. Sensory results of cookies evaluated that T1 of buckwheat and T4 of quinoa showed the best results. Furthermore, a bitter taste of cookies was developed in 80% wheat flour + 20% buckwheat flour (T2), 70% wheat flour + 30% buckwheat flour (T3) of buckwheat and 80% wheat flour + 20% quinoa flour (T5), 70% wheat flour + 30% quinoa flour (T6) of quinoa treatments. The collected data was subjected to statistical analysis to check the significance of the results in hot water extract.

Breadmaking with an old wholewheat flour: Optimization of ingredients to improve bread quality

Processing strategies are necessary to improve the quality of baked old wholewheat flour products, since they are required by consumers but have poor technological properties. The present study tested the addition of common improvers on an old wholewheat flour performance to optimize bread quality. At first, the effect of seven improvers on dough rheology and bread specific volume was evaluated using a screening design method. All of the improvers affected the farinographic parameters; the most promising effects were shown by sucrose, salt and guar gum. Bread specific volume was significantly improved by sucrose, extra virgin olive oil and ice; hence, the effects of these variables on dough rheology and bread quality were evaluated in-depth in a full factorial trial. Dough stability and dough weakening were significantly improved by sucrose and extra virgin olive oil. Sucrose and extra virgin olive oil interaction optimized bread specific volume, crumb specific volume and hardness. The addition of 2% sucrose and 3% extra virgin olive oil resulted in optimized bread, on which a qualitative sensory evaluation was performed. This optimization approach could be applied to other wholewheat flours to improve product quality, hence promoting the consumption of high nutritional value breads.

Consumer Response to Tomato Pomace Powder as an Ingredient in Bread: Impact of Sensory Liking and Benefit Information on Purchase Intent.

This study evaluated consumer acceptance and purchase intent (PI) for bread formulated with dried tomato pomace powder (DTPP). DTPP was used to substitute 5 or 10% by weight for a 50/50 mix of white and whole-wheat flour used in a control bread. Consumers (n=231) evaluated sensory attributes and PI on the breads, which were produced and presented as slices from a typical commercial sandwich loaf. Before answering PI questions, panelists were presented with information regarding the DTPP ingredient. Some received information on nutritional quality, some on sustainability impact, some both, some neither. This approach allowed the impacts of those messages on PI to be tested, along with impact of liking, price, and other factors. PI was analyzed using a fractional logistic model. Statistically significant differences were observed in several sensory attributes, some favoring the DTPP ingredient with overall liking very similar for the 5% DTPP and control bread samples. Price and overall liking were highly significant variables effecting PI. DTPP proved to be an excellent ingredient to replace a portion of wheat flours to improve nutritional value of bread products. PRACTICAL APPLICATION: This study shows that dried tomato pomace powder (DTPP) has potential application as an ingredient, since it improved nutritional content, appearance, and color appeal of wheat bread. Furthermore, food producers who are considering the use of byproducts in their product formulations should be encouraged by the finding that informed consumers were as willing to purchase the bread with the ingredient, as they were to purchase a typical comparable sandwich bread without it. Furthermore, both a nutrition message and a sustainability message can increase PI for the bread containing the byproduct relative to their PI toward the control bread.