Wheat Straw Research Articles

Co-composting a grape marc: An influence of grape stalks and different biowastes presence on the physical - chemical parameters of the mixture

Grape pomace (GP) represents a solid residue generated after the wine-making process and includes grape marc (GM) and it contains skins, seeds, pulp and grape stalks (GS). In this work, eight different mixtures of GM and organic wastes, was observed with an aim to investigate the effect of co-supstrate and GS presence. In the first experiment, GM and co-substrates was co-composted together, in mixture M1, GM was mixed with food waste (FW), in mixture M2, GM mixed with poultry manure (PM), in M3, GM mixed with wheat straw (WS) and GM mixed with FW, PM and WS in M4. In the second experiment, in M5, GM, FW mixed with GS, in M6, GM, PM mixed with GS, in M7, GM, WS mixed with GS, and GM, FW, PM, WS mixed with GS in M8. During the co-composting, the all mixtures achieved two temperature peaks and the acidic phase lasted 10–23 days in first experiment and 6–16 days in second experiment. The loss of total OM and total C was recorded, and a total N increased from 0.58 % to 91.5 % in both experiments. The four mixtures from the both experiments showed the bigger change, reaching the C/N ratio around 15 which is characteristic of the end of process, while in the other mixtures, the C/N was higher than 20. The analyses of biodegradability showed that the six mixtures has a higher biodegradability rate (from 15.03 % to 25 %). A slight decrease in the biodegradability when is WS co-substrate (5.66 % and 5.23 %) was found. Thus, co-composting process might be suitable treatment for GM, especially when the co-subtracts are PM and FW, and GS as the bulking agent. In this way, the recycling and velarization of those wastes can be achieved, with positive environmental effects.

Anaerobic Digestion of Dye Wastewater and Agricultural Waste with Bio-Energy and Biochar Recovery: A Techno-Economic and Sustainable Approach

While several researchers have investigated the anaerobic digestion (AD) of textile wastewater for dye degradation, their studies suffer from lower biogas productivity due to substrate inhibition and the occurrence of secondary pollution from digestate disposal. Hence, this study focuses on using the extract of wheat straw (WS) as a co-substrate to facilitate the dye AD process, followed by recycling the digestate sludge for biochar production. In the first study, the batch digesters were operated at different dye wastewater (DW)/WS ratios (0–50% v/v), substrate-to-inoculum ratio of 0.28–0.50 g/g, pH 7.0 ± 0.2, and 37 °C. The digester operated at a DW/WS fraction of 65/35% (v/v) showed the best chemical oxygen demand (COD) removal efficiency of 68.52 ± 3.40% with bio-CH4 of 270.52 ± 19.14 mL/g CODremoved. About 52.96 ± 3.61% of the initial COD mass was converted to CH4, avoiding inhibition caused by volatile fatty acid (VFA) accumulation. In the second experiment, the dry digestate was thermally treated at 550 °C for 2 h under an oxygen-deprived condition, yielding 0.613 ± 0.031 g biochar/g. This biochar exhibited multiple functional groups, mineral contents, and high stability (O/C = 0.193). The combined digestion/pyrolysis scenario treating 35 m3/d (106.75 kg COD/d) could maintain profits from pollution reduction, biogas, biochar, and carbon trading, obtaining a 6.5-year payback period.

Synthesis and morphology of Ag nanowires by fiber template method

The synthesis of traditional silver nanowires often uses a polyol method. There are many factors that affect the structure of silver nanowires, such as silver ion concentration, type and amount of reducing agent, oxygen concentration, stirring speed, temperature, and time. The synthesis conditions are harsh and difficult to replicate. In this paper, natural fibers and synthetic fibers were used as templates to assist the polyol reduction method to obtain silver nanowires with uniform structure. The effect of fiber types on the structure of silver nanowires were studied, including hemp fibers, wheat straw fibers, tobacco stem fibers, and polycarbonate fibers. Polycarbonate fibers induced the synthesis of silver nanowires with the highest aspect ratio, highest yield, and most uniform diameter distribution. The effect of polycarbonate fibers concentrations on the morphology and conductivity of silver nanowires were also studied. When the polycarbonate mass concentration was 8.5 × 10−4 g/mL, the aspect ratio of silver nanowires was the highest. The effect of polycarbonate fibers length (2 mm\\5 mm\\7 mm) on the morphology of silver nanowires were also studied. When the length of the template polycarbonate fibers was 7 mm, the length to diameter ratio and conductivity of the nanowires obtained are the best. Furthermore, the reaction kinetics of the reaction were studied via multiple sampling of silver nanowire reaction solutions and characterized by using UV–visible spectroscopy and scanning electron microscopy. The synthesis method of silver nanowires using fiber template is simple and fast, and can be used to synthesize silver nanowires with uniform diameter distribution on a large scale, thus solving the bottleneck problem of harsh synthesis conditions for silver nanowires. The resulting silver nanowires were blended with carboxymethyl cellulose to prepare conductive inks, which were coated on paper and cured at 180 °C for 30 min to achieve good conductivity.

Cellobionate production from sodium hydroxide pretreated wheat straw by engineered Neurospora crassa HL10

This study investigated cellobionate production from a lignocellulosic substrate using Neurospora crassa HL10. Utilizing NaOH-pretreated wheat straw as the substrate obviated the need for an exogenous redox mediator addition, as lignin contained in the pretreated wheat served as a natural mediator. The low laccase production by N. crassa HL10 on pretreated wheat straw caused slow cellobionate production, and exogenous laccase addition accelerated the process. Cycloheximide induced substantial laccase production in N. crassa HL10, enabling the strain to yield approximately 57 mM cellobionate from pretreated wheat straw (equivalent to 20 g/L cellulose), shortening the conversion time from 8 to 6 days. About 92% of the cellulose contained in the pretreated wheat straw is converted to cellobionate. In contrast to existing methods requiring pure cellobiose or cellulase enzymes, this process efficiently converts a low-cost feedstock into cellobionate at a high yield without enzyme or redox mediator supplementation.

Investigation of Physiomorphological Characteristics of Sirvan Wheat Cultivar Using Amendment Materials

In order to investigate the effect of some amendment materials on physiomorphological characteristics of the Sirvan wheat cultivar, a randomized complete block design experiment and replicated three times, was carried out in the years 2018-2019 on a farm in Dasht-e Armou, Dareshahr Ilam Province, Iran. The aim of this study was to investigate and compare the effects of two factors, namely the type of amendment materials and the number of insoluble matters (alfalfa residues at 5, 10, and 15 t/ha, straw and wheat straw at 5, 10 and 15 t/ha, poultry manure at 2, 4 and 6 t/ha and the required 100-percent mineral fertilizer) on the plant. The results showed that the use of amendment materials significantly increased the number of spikes (15 to 143 percent), chlorophyll index (18 to 122 percent), number of leaves (8 to 51 percent), relative water content (6 to 21 percent), plant height (5 to 16 percent) and leaf area index (5 to 33 percent) of wheat. The highest number of leaves (19), plant height (115 cm), leaf area index (5.76), and relative water content (70 percent) were observed in 15 t/ha of alfalfa residues while the highest number of spikes (5.67) and chlorophyll index leaf (18.6) was obtained in 6 t/ha of poultry manure. Based on findings, it can be stated that the use of amendment materials, especially in raw form and poultry manure, will have beneficial effects on the growth and yield of wheat.

Morphological, thermal and mechanical properties of wheat‐straw reinforced copper nanocomposite

AbstractThe work summarizes an innovative nanocomposite including synthesized copper nanoparticle (CuNP) impregnated wheat straw (WS) (the agronomic waste from an wheat plant) reinforced unsaturated polyester resin has been established. The addition of nanoparticles (NPs) increased the antifungal properties (~11%), durability (~9%), and strength (~39%) of the composites. Therefore, these nanoparticles have been synthesized from a copper chloride dihydrate precursor and they have been impregnated into wheat straw via cationization. This copper‐impregnated wheat straw (CuIWS) was formulated and employed to create a strong and long‐lasting nanocomposite with unsaturated polyester resin. Their morphological, mechanical, chemical, biodegradability (BD), and thermal properties were estimated and relationships were explicated systematically. Particularly, the tensile strength of polyester resin, crude and treated WS (cationized and copper‐impregnated) composites were 11.70, 14.20, 20.92, and 22.34 N/mm2 respectively. Therefore the reinforcement capability for crude, cationized and copper‐impregnated WS composites increased by ~22%, 75%, and 92% respectively. The residual ash was just about 16.23%, 12.04% and 6.56% for copper impregnated wheat straw composite (CuIWSC), Cationized wheat straw composite (CWSC) and untreated wheat straw composite (UTWSC) respectively point to the existence of ~4.1% Cu incorporated into the wheat straw which holds up the energy dispersive x‐ray (EDX) spectra of ~4.2% copper content. Thermogravimetric analysis (TGA) indicates that the nanocomposites are stable up to 325°C. These nanocomposites also show superlative crystallinity compared to other ones. Water uptake capacity followed typical Fickian diffusion law. The developed nanocomposites might be suitable for automobile and aircraft parts, furniture, and other indoor to outdoor applications.Highlights TS of the composites increased by increasing the WS filling up to 15%. The crystallinity increased after the addition of nanoparticles. The typical water uptake properties followed the Fickian diffusion rule. Incorporation of nanoparticles increased 11% antifungal properties. The developed nanocomposites are used for inside and outside applications.

Properties of biochars derived from different straw at 500℃ pyrolytic temperature: Implications for their use to improving acidic soil water retention

Climate change cause extreme weather effects with temperature increases and drops in humidity, such as drought and heatwaves, which will lead to more evaporation in arid and semi-arid lands. The application of biochar made from crop straw without burning to farmland can effectively improve the water retention capacity of soil. A testing program has been carried out in a climate simulation laboratory to study the effects of different straw biochars on the cracking and evaporation of soils due to drying. Biochar from wheat straw (WS), corn straw (CS) and rice straw (RS) is produced at a pyrolysis temperature of 500℃. Thermogravimetric analysis and elemental analysis are carried out to obtain the properties of the biochar. Five percent of WS, CS and RS biochar by weight is added to acidic soil. Digital camera and digital image processing technology are used to analyze the crack morphology of the samples during evaporation. The results indicate that the RS biochar has the highest ash content (32.5 %), CS biochar has the highest content of volatile solid (25.36 %) and WS biochar has the highest content of fixed carbon (55.38 %). Biochar can effectively improve the water retention capacity of soil. The final water contents of the WS, CS and RS biochar soil samples are 132.3 %, 101.0 %, and 20.7 % respectively higher than that of the soil without biochar. Moreover, biochar can effectively reduce the degree of soil cracking. The addition of WS, CS and RS biochar can reduce soil cracking by 9.21 %, 16.57 %, and 7.46 %, respectively. WS contains more total cellulose than CS and RS, so WS biochar is the best choice to improve soil water retention ability. Therefore, biochar technology helps to optimize soil water retention while avoiding environmental pollution from straw burning.

Extraction and Depolymerization of Lignin from Different Agricultural and Forestry Wastes to Obtain Building Blocks in a Circular Economy Framework.

Large amounts of agri-food waste are generated and discarded annually, but they have the potential to become highly profitable sources of value-added compounds. Many of these are lignin-rich residues. Lignin, one of the most abundant biopolymers in nature, offers numerous possibilities as a raw material or renewable resource for the production of chemical products. This study aims to explore the potential revalorization of agricultural by-products through the extraction of lignin and subsequent depolymerization. Different residues were studied; river cane, rice husks, broccoli stems, wheat straw, and olive stone are investigated (all local wastes that are typically incinerated). Traditional soda extraction, enhanced by ultrasound, is applied, comparing two different sonication methods. The extraction yields from different residues were as follows: river cane (28.21%), rice husks (24.27%), broccoli (6.48%), wheat straw (17.66%), and olive stones (24.29%). Once lignin is extracted, depolymerization is performed by three different methods: high-pressure reactor, ultrasound-assisted solvent depolymerization, and microwave solvolysis. As a result, a new microwave depolymerization method has been developed and patented, using for the first time graphene nanoplatelets (GNPs) as new promising carbonaceous catalyst, achieving a 90.89% depolymerization rate of river cane lignin and yielding several building blocks, including guaiacol, vanillin, ferulic acid, or acetovanillone.

Experimental analysis of the effects of feedstock composition on the plastic and biomass Co-gasification process

Co-gasification is a feasible approach to manage fast-growing plastic and biomass waste issues. The current work examines air gasification of plastic waste blending with biomass. The influence of plastic-type and biomass characteristics on product distribution under the same operating condition was studied. Ethylene-vinyl acetate, high-density polyethylene, and polypropylene were the investigated plastics while the biomass materials considered were pine sawdust (PS), used ground coffee (UGC), and wheat straw (WS) are compared. Additionally, co-gasification and thermogravimetric analyses (TGA) of plastic and individual biomass components, namely, cellulose, hemicellulose, and lignin, were conducted to identify the nature of the synergy arising from plastic and biomass integration. Similarities in the chemical structure and composition of the investigated plastics resulted in the type of plastic marginally influencing product distribution. The gas composition included 4.6 vol% CH4, 37.5 % CO2, 5.3 % CnHm, 42 % CO, and 10.8 % H2, with yields of 5.9 wt% char, 39.5 wt% gas, and 54.8 wt% tar. Conversely, the type of biomass had a substantial effect on both gas composition and product yields. WS and UGC, characterized by higher hemicellulose and lignin content, generated more hydrogen with 14.4 and 13.3 vol%, respectively, and exhibited lower tar content (45.7 and 47.8 wt%) compared to PS, which has a higher cellulose content and yielded 54.8 wt% tar. During EVA/cellulose co-gasification, the predominant gases produced are CO and CO2, with H2 concentration of 7.2 vol%. In contrast, co-gasification of EVA/xylan and EVA/lignin yields 13.5 and 19.9 vol% hydrogen, respectively. Interactions and synergism between the plastic and biomass were found to be more intensified when the biomass contained greater proportions of cellulose and lignin. Co-gasification and TGA analyses indicated that plastic/cellulose and plastic/lignin interactions in the gas and solid phases (volatile-volatile and volatile-char interactions) and plastic/xylan interactions in the gas phase (volatile-volatile interactions) were significant. Modeling the predictability of the output data revealed that if interactions between the plastic and biomass components are accounted for, the co-gasification results are predictable with a credible accuracy for all biomass types. The predictability model offers a practical approach for selecting an appropriate co-gasification feedstock combination to give a targeted process performance.

Unveiling the Impact of Soil Prebiotics on Rhizospheric Microbial Functionality in Zea mays L.

Prebiotics, a subset of biostimulants, have garnered attention for their potential to enhance soil conditions and promote plant growth, offering a promising alternative to conventional agricultural inputs. This study explores how two commercial prebiotics, K1® and NUTRIGEO L® (SPK and SPN), impact soil functions compared to a control (SP). The experiment involved agricultural soil amended with organic wheat straws and cultivated with Zea mays L. Previous research demonstrated substantial effects of these prebiotics on plant biomass, soil parameters, and microbial community ten weeks after application. The present study delves deeper, focusing on soil microbial abundance, enzyme activities, and metabolic diversity. Analysis revealed that SPN notably increased the fungi-to-bacteria ratio, and both prebiotics elevated the activity of several key enzymes. SPN enhanced α-glucosidase and β-galactosidase activities, while SPK increased arylsulfatase, phosphatase, alkaline phosphatase, and urease activities. Enzymatic indexes confirmed the positive impact on soil functional diversity and fertility. Additionally, prebiotic treatments showed distinct metabolic profiles, with SPK degrading eleven carbon sources more rapidly across five groups and SPN accelerating the decomposition rate of four carbon sources from three groups. These findings highlight the ability of prebiotics to shape microbial communities and enhance soil fertility by modulating their functional activity and diversity.

Pyrolysis of wheat straw pellets in a pilot‐scale reactor: Effect of temperature and residence time

AbstractPyrolysis of two types of pellets (T1: 100% wheat straw, and T2: 70% wheat straw; 10% sawdust, 10% biochar, and 10% bentonite clay) was performed in a pilot‐scale reactor under a nitrogen environment at 20°C to 700°C. This was to investigate slow pyrolysis yields and gas composition as a function of temperature and residence time. The experimental data were obtained between 300°C and 600°C, with a residence time of 90 min, a nitrogen flow rate of 50 cm3/min, and a heating rate of 20°C/min. The results indicated that the maximum pyrolysis temperature is 605°C with a residence time of 55 min. The product analysis showed that the proportion of gas was higher than that of biochar and bio‐oil. The conversion efficiency increased with higher temperatures and varied between 66% and 76%. The results showed that carbon dioxide was the main component in the produced gas, and the maximum gas concentration was 63.6% at 300°C for T1. The higher temperature and longer residence time increased the syngas (CO + H2) composition for both T1 and T2 treatments. Nevertheless, the produced biochar had a high carbon content and retained a high calorific value, indicating slow pyrolysis is the ideal utilization route of wheat straw pellet biomass for biochar.

The Synergetic Reduction of the Condensation Degree of Dissolved Lignin (DL) during the Refining Process of Wheat Straw Biomass Based on the MA/O3 System.

Lignin, a natural pol2ymer with a complex structure that is difficult to separate, is prone to C-C bond condensation during the separation process. To reduce the condensation of lignin, here, a novel method is proposed for separating the components by using a combination of maleic acid (MA)/ozone (O3) to co-treat wheat straw. The removal of lignin, glucan, and xylan was 38.07 ± 0.2%, 31.44 ± 0.1%, and 71.98 ± 0.1%, respectively, under the conditions of ball-milling of wheat straw for 6 h, reaction temperature of 60 °C, and O3 holding time of 9 min. Lignin-rich solutions were collected to extract the dissolved lignin (DL) after washing the treated samples. The DL obtained under MA/O3 conditions had a carboxyl group (-COOH) content of 2.96 mmol/g. The carboxyl group of MA underwent esterification with the hydroxyl group (-OH) at the γ position of lignin and O3 reacted on the positions of the lignin side chain or the phenolic ring, resulting in a break in the side chain and the opening of the phenolic ring to introduce the carboxyl group. The 2D-HSQC-NMR results revealed that the phenolic ring-opening reaction of lignin in the presence of O3 was essentially free of β-β and β-5 condensation bonds.

Interaction of ilmenite oxygen carrier with wheat straw ash during chemical looping combustion: Mechanisms and performance variation

Chemical looping combustion (CLC) offers a promising approach for biomass utilization. The utilization of biomass as the primary fuel in CLC (bio-CLC) is a way to generate negative CO2 emissions and thus interesting for climate change mitigation. However, the presence of ash in biomass raises concerns about the performance variation of the oxygen carrier during CLC. This study investigated the impact of adding wheat straw ash (WSA) to the ilmenite oxygen carrier throughout the CLC process. The effects of WSA addition ratio (0–15 %) and cycle number on the performance of oxygen carrier were evaluated. The results showed a progressive enhancement followed by a subsequent reduction in the performance of ilmenite with the increase of WSA addition ratio, and the peak reactivity of ilmenite was attained with 10 % WSA addition. Addition of 15 % WSA resulted in severe particle sintering, causing a slight diminishment in ilmenite reactivity. Furthermore, the mechanisms of the performance variation of ilmenite with WSA addition were explored. The superior redox reactivity and oxygen release capability of the ilmenite with 10 % WSA addition were evidenced by X-ray photoelectron spectroscopy and hydrogen temperature-programmed reduction analysis, respectively. Notably, X-ray diffraction and thermodynamic calculation confirmed the formation of KFeO2, which significantly enhanced the reactivity of ilmenite. The specific surface area of the ilmenite was greatly enlarged with 10 % WSA addition, and a porous structure was evidenced by scanning electron microscope. The findings suggest the interaction between the WAS and ilmenite enhances the reactivity of the ilmenite with an optimal WAS addition ratio of 10 %, providing a guidance for the long-term operation of CLC.

Joint effect of black carbon deriving from wheat straw burning and plastic mulch film debris on the soil biochemical properties, bacterial and fungal communities

Black carbon (BC) formed after straw burning remains in farmland soil and coexists with plastic mulch film (PMF) debris. It is unclear how BC influences soil multifunctionality in the presence of PMF debris. In this study, we determined the joint effects of BC and PMF debris on soil biochemical properties and microbial communities. We conducted a soil microcosm experiment by adding BC formed by direct burning of wheat straw and PMF debris (polyethylene (PE) and biodegradable PMF (BP)) into soil at the dosages of 1 %, and soils were sampled on the 15th, 30th, and 100th day of soil incubation for high-throughput sequencing. The results showed that the degradation of PMF debris was accompanied by the release of microplastics (MPs). BC decreased NH4+-N (PE: 68.63 %; BP: 58.97 %) and NO3−-N (PE: 12.83 %; BP: 51.37 %) and increased available phosphorus (AP) (PE: 79.12 %; BP: 26.09 %) in soil containing PMF debris. There were significant differences in enzyme activity among all the treatments. High-throughput sequencing indicated that BC reduced bacterial and fungal richness and fungal diversity in PMF debris-exposed soil, whereas PMF debris and BC resulted in significant changes in the proportion of dominant phyla and genera of bacteria and fungi, which were affected by incubation time. Furthermore, BC affected microorganisms by influencing soil properties, and pH and N content were the main influencing factors. In addition, FAPRPTAX analysis indicated that BC and PMF debris affected soil C and N cycling. These findings provide new insights into the response of soil multifunctionality to BC and PMF debris.

An eco-friendly wheat straw adsorbent functionalized with mercaptopropionyl for the removal of Cu(II) from aqueous solution

A novel absorbent called mercaptopropionyl wheat straw (MPWS) was prepared through alkali pretreatment and mercaptopropionyl modification for efficient removal of Cu(II) from aqueous solutions. Single factor experiments were conducted to investigate various parameters affecting the adsorption of Cu(II) with MPWS. Adsorption experiments including kinetics, isotherms, thermodynamics, as well as various characterization methods were employed to discuss the mechanism of Cu(II) uptake by MPWS in this study. The results showed that MPWS exhibited high removal capacity for Cu(II), achieving a maximum removal efficiency of 97.28 % under optimal conditions: oscillation rate at 150 rpm, temperature at 303 K, duration at 2 h, pH value at 6.0, and initial concentration of Cu(II) at 100 mg/L. The fitting results indicated that pseudo-second-order kinetic model better described the experimental data while Freundlich model provided a better fit for isothermal data. Thermodynamic calculations confirmed that the adsorptive process was spontaneous and endothermic. Characterization techniques such as FTIR spectroscopy SEM imaging, and EDS analysis confirmed chemisorption between Cu(II) ions and functional groups present on MPWS including sulfhydryl groups, amine groups, hydroxyl groups, and carboxyl groups. Overall, the main mechanisms governing Cu(II) uptake onto MPWS included coordination, ion exchange, electrostatic adsorption, and physical adsorption.

Accelerated Charge Transfer through Interface Chemical Bonds in MoS2/TiO2 for Photocatalytic Conversion of Lignocellulosic Biomass to H2.

Solar photocatalytic H2 production from lignocellulosic biomass has attracted great interest, but it suffers from low photocatalytic efficiency owing to the absence of highly efficient photocatalysts. Herein, we designed and constructed ultrathin MoS2-modified porous TiO2 microspheres (MT) with abundant interface Ti-S bonds as photocatalysts for photocatalytic H2 generation from lignocellulosic biomass. Owing to the accelerated charge transfer related to Ti-S bonds, as well as the abundant active sites for both H2 and ●OH generation, respectively, related to the high exposed edge of MoS2 and the large specific surface area of TiO2, MT photocatalysts demonstrate good performance in the photocatalytic conversion of α-cellulose and lignocellulosic biomass to H2. The highest H2 generation rate of 849 μmol·g-1·h-1 and apparent quantum yield of 4.45% at 380 nm was achieved in α-cellulose aqueous solution for the optimized MT photocatalyst. More importantly, lignocellulosic biomass of corncob, rice hull, bamboo, polar wood chip, and wheat straw were successfully converted to H2 over MT photocatalysts with H2 generation rate of 10, 19, 36, 29, and 8 μmol·g-1·h-1, respectively. This work provides a guiding design approach to develop highly active photocatalysts via interface engineering for solar H2 production from lignocellulosic biomass.

High surface area biochar for the removal of naphthenic acids from environmental water and industrial wastewater.

This study reports the production of biochar adsorbents from two major crop residues (i.e., rice and wheat straw) to remove naphthenic acids from water. The alkali treatment approach was used for biochar activation that resulted in a tremendous increase in their surface area, i.e., up to 2252 and 2314 m2/g, respectively, for rice and wheat straw biochars. Benzoic acid was used as a model compound to optimize critical adsorption parameters. Its maximum monolayer adsorption capacity of 459.55 and 357.64mg/g was achieved for activated rice and wheat straw biochars. The adsorption of benzoic acid was exothermic (∆H° = - 7.06 and - 3.89kJ/mol) and identified possibly as physisorption (Gibbs free energy ranges 3.5-4.0kJ/mol). The kinetic study suggested that adsorption follows pseudo-second-order kinetics with qe2 for rice straw and wheat straw-derived adsorbents at 200 and 194mg/g, respectively. As adsorbent, the recyclability of activated biochars was noticed with no significant loss in their efficiency for up to ten successive regeneration cycles. The adsorption results were validated using a commercial naphthenic acid mixture-spiked river water and paper/pulp industrial effluent. The activated rice and wheat straw biochars exhibited excellent adsorption efficiency of 130.3 and 74.6mg/g, respectively. The naphthenic acid adsorption on biochar surface was due to various interactions, i.e., weak van der Waal's, pore filling, π-π stacking, and ionic interactions. This study offers a cost-effective and eco-friendly approach to valorizing agricultural residues for pollutant removal from industrial wastewater, including petroleum refineries.

Effects of Applying Biochar on Soil Cadmium Immobilisation and Cadmium Pollution Control in Lettuce (Lactuca sativa L.)

In order to analyse the impact of biochar in terms of reducing the bioavailability of cadmium (Cd) in soil, a study was conducted on the solidification effect of biochar on soil cadmium and its resistance to cadmium contamination in lettuce. In this study, soil which was contaminated with 10 mg/kg cadmium was used as the substrate; corn, rice, and wheat straw biochar were used as solidification and amendment materials; and lettuce (Lactuca sativa L. cv. Grand Rapids) was used as the test plant. The morphological characteristics of the biochar, soil pH, electrical conductivity, cation exchange capacity, and soil-available Cd, as well as lettuce plant height, fresh weight, and leaf Cd content, were measured and analysed. The results showed that all three types of biochar possessed distinct porous structures and functional groups such as hydroxyl, ether, and carbonyl groups. Increases in soil pH, electrical conductivity (EC), cation exchange capacity (CEC), lettuce plant height, and fresh weight were effectively promoted. Additionally, a significant reduction in the available Cd content in the soil and Cd content in lettuce leaves was observed, with the inhibitory effect becoming more pronounced as the biochar application rate increased. When 5% corn straw biochar was added (1 kg of substrate with 50 g of biochar), the best inhibitory effect on Cd contamination was observed, with a cadmium content of 4.63 mg/kg in lettuce leaves. The available Cd in the soil and the Cd content in lettuce leaves decreased by 32.00% and 49.78%, respectively, compared to the CK group (without biochar treatment). Additionally, the plant height and fresh weight of lettuce increased by 25.56% and 31.31%, respectively, compared to the CK group. This indicated that the application of straw biochar can stabilise soil Cd, reduce the availability of Cd in the soil, inhibit the transfer of Cd into lettuce, promote the growth of lettuce, and lower the ecological environmental risk of Cd. These research results can provide a theoretical basis and scientific guidance for the remediation of soil Cd contamination and the safe production of lettuce.

Functionality of wheat straw-derived biochar enhanced its efficiency for actively capping Cd and Pb in contaminated water and soil matrices: Insights through batch adsorption and flow-through experiments

The impact of functionality of biochar on pressing environmental issue of cadmium (Cd) and lead (Pb) co-contamination in simultaneous soil and water systems has not sufficiently reported. This study investigated the impact of Fe- and Mg-functionalized wheat straw biochar (Fe-WSBC and Mg-WSBC) on Cd and Pb adsorption/immobilization through batch sorption and column leaching trials. Importantly, Fe-WSBC was more effective in adsorbing Cd and Pb (82.84 and 111.24 mg g−1), regeneration ability (removal efficiency 94.32 and 92.365), and competitive ability under competing cations (83.15 and 84.36%) compared to other materials (WSBC and Mg-WSBC). The practical feasibility of Fe-WSBC for spiked river water verified the 92.57% removal of Cd and 85.73% for Pb in 50 mg L−1 and 100 mg L−1 contamination, respectively. Besides, the leaching of Cd and Pb with Fe-WSBC under flow-through conditions was lowered to (0.326 and 17.62 mg L−1), respectively as compared to control (CK) (0.836 and 40.40 mg L−1). In short, this study presents the applicable approach for simultaneous remediation of contaminated water and soil matrices, offering insights into environmentally friendly green remediation strategies for heavy metals co-contaminated matrices.

Biochar enhanced anaerobic co-digestion of poultry litter and wheat straw: Performance, microbial analysis, and multiple factors’ interaction

Amendment of anaerobic co-digestion (Co-AD) of poultry litter (PL) and agricultural straw using biochar has rarely been practiced. This study conducted two sequential experiments to evaluate the effect of adding alkaline biochar on improving the batch Co-AD of PL and wheat straw. The feasibility experiment identified the advantages of adding biochar by the improved observed cumulative methane yield (CMYo, mL CH4/g VSsubstrate) of 9.7%; the increased removal rates of the substrate total solids (TSsubstrate) and volatile solids (VSsubstrate) of 15.2% and 14.2%, respectively; the enhanced abundance of both hydrolytic bacteria and methanogens, including hydrogegenotrophic Methanobacterium and, especially, the acetolactic Methanosaeta; and the 37.3% higher abundance of the methanogenic pathways, compared to the control. The interaction experiment showed that biochar dosage (BD) interacted with the initial substrate carbon-to-nitrogen ratio (C/N) and total solids level (TS). The developed mathematical models for CMYo and VSsubstrate removal by response surface methodology were significant, which predicted the optimal conditions being initial substrate C/N ratio 29.93 and TS 6.98%, and BD 9.98% substrate. The optimized CMYo and VSsubstrate removal were 17.7% and 22.1% higher, respectively, than those of the Control. These results support the utilization of biochar in improving the Co-AD of agricultural wastes.