Weight Ratio Research Articles

Pipeline impact force observation-based intelligent measurement method for liquid flow

This paper proposes an innovative measurement method that uses the impact force generated when the liquid flows through the pipe as an observation indicator, and successfully establishes a non-linear mapping relationship between the impact force sequence and the weight of the flowing liquid by training and learning the collected impact force sequence through the CLCD (CNN-LSTM-CNN-Double) network architecture. In response to the challenges such as the prevalent interference factors and inconsistent flow time lengths in the collected data, this paper introduces a new weight ratio algorithm, WRP (Weight-Ratio-Process), which effectively improves the robustness and accuracy of data processing. The experimental results show that the effective detection rate of the method reaches 90 % when the weighing error is set to ±5g on the constructed fluid impact force test platform. When the error range is relaxed to ±15g, the effective detection rate is increased to 98 %. This achievement demonstrates the broad application potential and practical value of the method in the field of fluid transport measurement.

M6A methyltransferase ZC3H13 improves pulmonary fibrosis in mice through regulating Bax expression

Idiopathic pulmonary fibrosis (IPF) is a progressive and fatal lung disease. N6-methyladenosine (m6A) is a reversible RNA modification that was shown to be associated with IPF development. The present study aimed to explore the function and potential mechanism of the m6A methylation enzyme zinc finger CCCH-type containing 13 (ZC3H13) in IPF. In the study, bioinformatic screening yielded a differentially expressed m6A gene, ZC3H13, which was down-regulated in GEO microarrays, BLM-induced mouse models, and cellular models. Overexpression of ZC3H13 reduced histopathological damage of lung tissues in mice, mitigated fibrosis (including reduced α-SMA, collagen Ⅰ, and Vimentin levels, and elevated E-cadherin levels), decreased lung/body weight ratio and lung hydroxyproline levels, reduced oxidative stress (increased SOD activity and GSH-Px activity and decreased MDA levels), suppressed apoptosis within lung tissues and MLE-12 cells, promoted Bcl-2 expression, and inhibited Bax expression. Bax expression was found to be negatively correlated with ZC3H13 expression by correlation analysis. ZC3H13 could bind Bax mRNA and promote its m6A methylation through reading protein YTHDC1, thereby inhibiting its stability. Bax inhibition ameliorated BLM-induced MLE-12 cell dysfunction and partially abrogated the inhibition of MLE-12 cell function by ZC3H13 downregulation. In conclusion, m6A methyltransferase ZC3H13 impedes lung epithelial cell apoptosis and thus improves pulmonary fibrosis by promoting Bax mRNA m6A methylation and down-regulating Bax expression through reading protein YTHDC1.

Control of tungsten-epoxy composite porosity prepared using a high-energy ball milling method: An engineering aspect of backing layer fabrication

Tungsten-epoxy composite is commonly used as a backing layer substrate of piezoelectric-based ultrasonic transducers. The physical properties of this composite, such as porosity, play a significant role in controlling the behavior and specifications of transducer fabrication. Therefore, this study aimed to investigate the effects of tungsten content in epoxy to control porosity and determine the engineering aspects of ultrasonic transducer fabrication. The experiment was conducted using a shaker-type high-energy ball milling method, where non-spherical and faceted tungsten particles with a mean size of 1 μm were composited into epoxy resin as a matrix at various tungsten-epoxy weight ratios of 0:1 to 10:1. The prepared composite surface morphological and elemental, tungsten loading, particles, and epoxy bonding were examined and analyzed. Furthermore, analysis was carried out on the relationship between tungsten content and the parameters corresponding to the composite acoustic characteristics, such as sound velocity, acoustic attenuation, and acoustic impedance. The results showed that composite porosity increased in the range of 12.40–31.87%, corresponding to acoustic impedance from 3.04 to 9.37 Mrayl (below 10 Mrayl for biomedical ultrasonic transducers) when the tungsten-epoxy weight ratio varied from 0:1 to 10:1. This showed the significant influence of tungsten particle loading on controlling porosity of tungsten-epoxy composite by precisely tuning the weight ratio, contributing to engineering process in the fabrication. In conclusion, porosity was adjusted by controlling the tungsten loading content in epoxy.

Natural Rubber Films Reinforced with Cellulose and Chitosan Prepared by Latex Aqueous Microdispersion.

In this paper, green composite films comprising natural rubber (NR), cellulose (CE), and chitosan (CS) were successfully fabricated through a simple, facile, cost-effective method in order to improve mechanical, chemical, and antimicrobial properties of NR composite films. Chitosan with a low molecular weight of 30,000-50,000 g/mol (CS-L) and a medium molecular weight of 300,000-500,000 g/mol (CS-M) was used for the fabrication. The composite films were prepared via a latex aqueous microdispersion method with different weight ratios of NR:CE:CS-L/CS-M. Fourier transform infrared spectroscopy (FTIR) results demonstrated strong interactions of hydrogen bonds between CE and CS-L/CS-M in the composite films. The tensile strength and the modulus of the composite films in dried form were found to significantly increase with the reinforcement of CE and CS-L/CS-M. The maximum tensile strength (13.8 MPa) and Young's modulus (12.7 MPa) were obtained from the composite films reinforced with CE at 10 wt.% and CS-L at 10 wt.%. The high elongation of 500-526% was obtained from the composite films reinforced with CE at 10 wt.% and CS (CS-L or CS-M) at 5.0 wt.%. The modification could also significantly promote antimicrobial activities and chemical resistance against non-polar solvents in the composite films. The NR composite films have potential uses as flexible films for sustainable green packaging.

Sewage sludge ash as filler in asphalt mastic: Low-temperature towards high-temperature performance

The sewage sludge ash (SSA) is characterized as a by-product used in the pavement industry to mitigate the environmental risks, enhance the landfill capacity and conserve the non-renewable resources. This research utilized SSA as a filler substitute in asphalt mastic, and its performance-based properties from low towards high temperatures were evaluated. For this goal, the physical and chemical properties of SSA and rock powder (used as base filler) were determined using BET surface area measurement, X-ray fluorescence, and scanning electron microscopy tests. The performance of base and SSA-modified asphalt mastics in four filler/bitumen weight ratios (0.6, 0.8, 1, and 1.2) was investigated using dynamic shear rheometer, multiple stress creep and recovery, linear amplitude sweep, and bending beam rheometer tests across a wide temperature range. The results indicate that SSA has a higher specific surface area, better bitumen absorption, and lower density compared to the base filler. Additionally, unlike the acidic nature of the base filler, SSA possesses strong basic properties, leading to a stronger chemical bond with bitumen and enhanced resistance to aging, particularly at high temperatures. Moreover, the lower density of SSA escalates the amount of filler per unit volume of the SSA-modified asphalt mastic, leading to the increased stiffness and elasticity. This trend improves resistance to permanent deformation and cracking at medium temperatures, although it has an adverse effect on performance of mastic at low temperatures. Moreover, due to the improved performance of SSA-modified asphalt mastic, this study can contribute to the sustainable development of the pavement industry.

CircMAPK1 induces cell pyroptosis in sepsis-induced lung injury by mediating KDM2B mRNA decay to epigenetically regulate WNK1

BackgroundMacrophage pyroptosis is a pivotal inflammatory mechanism in sepsis-induced lung injury, however, the underlying mechanisms remain inadequately elucidated.MethodsLipopolysaccharides (LPS)/adenosine triphosphate (ATP)-stimulated macrophages and cecal ligation and puncture (CLP)-induced mouse model for sepsis were established. The levels of key molecules were examined by qRT-PCR, Western blotting, immunohistochemistry (IHC) and ELISA assay. The subcellular localization of circMAPK1 was detected by RNA fluorescence in situ hybridization (FISH). Cell viability, LDH release and caspase-1 activity were monitored by CCK-8, LDH assays, and flow cytometry. The bindings between KDM2B/H3K36me2 and WNK1 promoter was detected by chromatin immunoprecipitation (ChIP) assay and luciferase assay, and associations among circMAPK1, UPF1 and KDM2B mRNA were assessed by RNA pull-down or RNA immunoprecipitation (RIP) assays. The pathological injury of lung tissues was evaluated by lung wet/dry weight ratio and hematoxylin and eosin (H&E) staining.ResultsCircMAPK1 was elevated in patients with septic lung injury. Knockdown of circMAPK1 protected against LPS/ATP-impaired cell viability and macrophage pyroptosis via WNK1/NLRP3 axis. Mechanistically, loss of circMAPK1 enhanced the association between KDM2B and WNK1 promoter to promote the demethylation of WNK1 and increase its expression. CircMAPK1 facilitated KDM2B mRNA decay by recruiting UPF1. Functional experiments showed that silencing of KDM2B or WNK1 counteracted circMAPK1 knockdown-suppressed macrophage pyroptosis. In addition, silencing of circMAPK1 alleviated CLP-induced lung injury in mice via KDM2B/WNK1/NLRP3 axis.ConclusionCircMAPK1 exacerbates sepsis-induced lung injury by destabilizing KDM2B mRNA to suppress WNK1 expression, thus facilitating NLRP3-driven macrophage pyroptosis.

Assessing the electromagnetic shielding effectiveness of coconut coir composites with varying iron particle concentrations

This study investigates the electromagnetic shielding effectiveness of Coconut Coir-based Porous Carbon (CCPC) composites with varying iron (Fe) particle concentrations, specifically focusing on four different weight ratios of CCPC/Fe-80, CCPC/Fe-60, CCPC/Fe-40, and CCPC/Fe-20. The novelty of this work lies in the use of sustainable coconut coir as a base material, emphasizing its eco-friendly and cost-effective attributes for Electromagnetic interference (EMI) shielding applications. The significance of varying iron particle concentrations is highlighted to optimize electromagnetic shielding effectiveness. Comprehensive analyses were conducted on these composites. X-Ray Diffraction (XRD) analysis confirmed the presence of crystalline Fe particles and amorphous carbon, with crystalline sizes determined via Williamson-Hall (W-H) plot, Scherrer Equation, and Strain Size Plot (SSP) ranging from 17.33 nm to 18.01 nm for the former. Raman spectroscopy revealed distinctive D and G bands, with intensity ratios indicating a slight increase in structural disorder with higher Fe content. UV-Visualization spectroscopy demonstrated distinct absorption peaks, with higher Fe content resulting in more pronounced absorbance and lower band gap energies. Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectroscopy (EDS) analyses provided detailed insights into the material's microstructure and elemental composition, confirming the successful integration of Fe particles within the porous carbon matrix. Vector Network Analyzer (VNA) testing measured the reflection loss (RL), showing values in the range of −26.4 dB to −20.2 dB, for 2 mm thick samples, corresponding to electromagnetic wave attenuation of over 99%. These results underscore the potential of CCPC/Fe composites, particularly in applications requiring effective Electromagnetic (EM) wave attenuation. This research offers a sustainable and cost-effective solution, contributing significantly to the field of materials science by enhancing electromagnetic compatibility in various technological applications.

Seedling Growth and Nutritional Status of Elaeagnus angustifolia and Robinia pseudoacacia as Response to Arbuscular Mycorrhizal Fungi and K-Humate

ABSTRACT This study aimed to reveal the effects of arbuscular mycorrhizae and K-humate on some of the morphological characteristics and growth of Russian olive (RO; Elaeagnus angustifolia L.) and black locust (BL; Robinia pseudoacacia L.). The indigenous mycorrhizal spores (Claroideoglomus claroideum, Claroideoglomus etunicatum, Claroideoglomus luteum, and Funneliformis mosseae) collected from rhizospheres of RO and BL trees in afforestation sites located in Central Anatolia. In addition, commercial mycorrhizal mixture and K-humate were used as treatments. Five treatments (1—indigenous mycorrhizal fungi, 2—K-humate, 3—indigenous mycorrhizal fungi + K-humate, 4—commercial mycorrhizal fungi, and 5—control) were assigned in a completely randomized design for both tree species. Four months after the treatments, inoculation rate, above-ground seedling height, fresh and dry weight, root collar diameter, length, fresh, and dry weight, leaf area index, shot-to-root dry weight ratio, seedling height to root collar diameter ratio, and Dickson quality index were determined. Plant and soil analyses were carried out to determine the effects of treatments on plant and soil nutrition. Indigenous arbuscular mycorrhizal fungi and K-humate combinations had positive effects on the morphological characteristics and nutritional status of the seedlings. The indigenous mycorrhizal and K-humate interaction showed the most pronounced effects on RO growth and nutrition.

Effect of sintering behavior and phase evolution on glass-ceramics entirely derived from ferrochrome slag and fluorite tailings

The recycling of solid waste is widely regarded as the one of the most crucial issues of sustainability. This is particularly evident in the industrial sector, where the production of slags is huge and their handling presents a significant challenge. In this study, solid wastes from the industrial sector, namely ferrochrome slag (Fs) and fluorite tailings (Ft), were employed for the preparation of glass-ceramics by the sintering method. Three glasses were prepared by using the melt-quenching method, with a weight ratio of 60∼70 % Fs and 40∼30 % Ft (designated S30, S35, and S40, where the higher number indicates a greater Fs content). The sintering and crystallization behaviors of these glasses were characterized by hot-stage microscopy (HSM) and differential thermal analysis (DTA). It was observed that S40 glass exhibited a weak sintering capacity in comparison to that of S30 and S35 glass, which can be attributed to the robust crystallization propensity of S40 glass. The coarser glass frits were subjected to sintering experiments at varying temperatures, which demonstrates that the predominant crystalline phase is augite and that Cr2O3 remains present in all sintered samples. Besides, a transition of the Cr2O3 crystal into uvarovite was observed in S40 glass sintered at 1050 °C. The sintering time controlling experiment demonstrated that both wollastonite and the Ca-rich flow formed during sintering are vital for the formation of uvarovite. The formation of uvarovite can enhance the hardness of GCs. All GCs samples sintered at 1050 °C and 1120 °C exhibit comparable mechanical performance.

Modern Insulation Materials for Sustainability Based on Natural Fibers: Experimental Characterization of Thermal Properties

The recycling of materials is in line with the policy of a closed-loop economy and is currently an option for managing waste in order to reuse it to create new products. To this end, 3D printing is being used to produce materials not only from pure polymers but also from their composites. Further development in this field seems interesting and necessary, and the use of recycled materials will help to reduce waste and energy consumption. This article deals with the use of degradable waste materials for the production of insulating materials by 3D printing. For the study, samples with different numbers of layers (one and five), composite thickness (20, 40, 60, 80, and 100 mm) and composition (including colored resins that were transparent, black, gray, and metallized, as well as resins that were colored gray using soybean oil and gray using natural fibers) were made. The role of natural fillers was played by glycerin and biomass ash with a weight ratio of 5%. The finished materials were tested, and the values of the coefficient of thermal resistance and heat transfer were determined. The best thermal properties among the tested materials were distinguished by a five-layer sample made of soybean-oil-based resin with a thickness of 100 mm. This sample’s heat transfer coefficient was: 0.16 W/m2K. As a material for thermal insulation in 3D printing technology, biodegradable components have great potential.

A Retrospective Audit of Placental Weight and Fetal Outcome at the Lagos University Teaching Hospital, Southwest Nigeria

Abstract Background: The placenta is an organ unique to mammals that connects the developing fetus to the uterine wall. The placenta supplies the fetus with oxygen and nutrients and allows fetal waste to be disposed of effectively via maternal circulation. Objective: The objective of this study is to determine the relationship between placenta weight at delivery and fetal outcomes. Materials and Methods: This was a retrospective study carried out between January 2022 and December 2023 at the labor ward of the Lagos University Teaching Hospital, Idi-Araba, Lagos, Nigeria. Results: The mean age of the women was 32.5 (3.4) years. The majority of the women were between 20 and 34 years of age. The mean placental weight was 657.5 (221.5) g. Maternal obesity and increasing parity were significantly associated with larger placenta weight (P = 0.04 and 0.01, respectively). Heavier placentas were also associated with fetal macrosomia and poor Appearance, Pulse, Grimace, Activity, and Respiration (APGAR) scores at 5 min (P < 0.05). Conclusion: This study concludes that a heavier placenta is associated with increasing parity, more operative delivery, bigger newborns, and a higher placenta-birth weight ratio.

Polycaprolactone Hybrid Scaffold Loaded With N,O-Carboxymethyl Chitosan/Aldehyde Hyaluronic Acid/Hydroxyapatite Hydrogel for Bone Regeneration.

Hydrogels have emerged as potential materials for bone grafting, thanks to their biocompatibility, biodegradation, and flexibility in filling irregular bone defects. In this study, we fabricated a novel NAH hydrogel system, composed of N,O-carboxymethyl chitosan (NOCC), aldehyde hyaluronic acid (AHA), and hydroxyapatite (HAp). To improve the mechanical strength of the fabricated hydrogel, a porous polycaprolactone (PCL) matrix was synthesized and used as a three-dimensional (3D) support template for NAH hydrogel loading, forming a novel PCL/NAH hybrid scaffold. A mixture of monosodium glutamate (M) and sucrose (S) at varied weight ratios (5M:5S, 7M:3S, and 9M:1S) was used for the fabrication of 3D PCL matrices. The morphology, interconnectivity, and water resistance of the porous PCL scaffolds were investigated for optimal hydrogel loading efficiency. The results demonstrated that PCL scaffolds with porogen ratios of 7M:3S and 9M:1S possessed better interconnectivity than 5M:5S ratio. The compressive strength of the PCL/NAH hybrid scaffolds with 9M:1S (561.6 ± 6.1 kPa) and 7M:3S (623.8 ± 6.8 kPa) ratios are similar to cancellous bone and all hybrid scaffolds were biocompatible. Rabbit models with tibial defects were implanted with the PCL/NAH scaffolds to assess the wound healing capability. The results suggest that the PCL/NAH hybrid scaffolds, specifically those with porogen ratio of 7M:3S, exhibit promising bone healing effects.

Active Disturbance Rejection Control of Hydraulic Quadruped Robots Rotary Joints for Improved Impact Resistance

Hydraulic actuated quadruped robots have bright application prospects and significant research values in unmanned area investigation, disaster rescue and other scenarios, due to the advantages of high payload and high power to weight ratio. Among these fields, inevitable collision of robots may occur when contact with unknown objects, step on empty objects, or collapse, all of which have an impact on the working hydraulic system. To overcome the unknown external disturbances, this paper proposes an active disturbance rejection control (ADRC) strategy of double vane hydraulic rotary actuators for the hip joints of the quadruped robots. Considering the order of the valve-controlled actuator model, a three-stage tracking differentiator, a four-stage extended state observer, and a state error feedback controller are designed relatively, and the extended state observer is adopted to observe and compensate the uncertainty of external load torque of the system. The effectiveness of the ADRC method is verified in simulation environment and a single joint experimental platform. Moreover, the impact experiments of the limb leg unit are carried out after introducing the proposed ADRC strategy into hip joint, the limb leg unit of quadruped robots presents better impact resistance ability.

Internally-crosslinked alginate dialdehyde/alginate/gelatin-based hydrogels as bioprinting inks for prospective cardiac tissue engineering applications

Cardiovascular diseases represent a worldwide social and economic challenge, due to heart tissue limited regenerative capabilities. 3D bioprinted cell-laden constructs are a promising approach to develop patches for cardiac regeneration or in vitro models for new drug preclinical discovery and validation. However, the development of bioinks with optimal mechanical, rheological, and biological properties is still a challenge. Although alginate (Alg)-based bioinks have been extensively explored, such hydrogels lack cell adhesion properties and degradability. Additionally, 3D Alg structures are usually obtained by micro-extrusion bioprinting exploiting conventional external cross-linking methods, which introduce inhomogeneities and unpredictability in construct formation. This work exploits Alg internal ionic gelation mechanism to obtain homogeneous self-standing multilayered 3D printed constructs without employing support baths or post-printing crosslinking treatments, combining an insoluble calcium salt (calcium carbonate, CaCO3) with an acidifying agent (D-(+)-Glucono-1,5-lactone, GDL) to promote controlled release of calcium ions. Alg was blended with oxidized alginate (ADA) and gelatin (Gel) to achieve degradable and cell adhesive hydrogels for cardiac tissue engineering. Firstly, ADA/Alg bioink composition was tailored by varying polymer weight ratio (keeping ADA as the main component) and calcium ions concentration to achieve cardiac tissue-like viscoelastic properties. Then, the amount of Gel in ADA/Alg hydrogels was optimized to support adult human cardiac fibroblasts (AHCFs) adhesion, producing shear thinning inks with tunable viscoelastic properties (G’ 650-1300 Pa) and degradation profile (40-80% weight loss after 21 days in phosphate buffered saline, PBS) by varying Gel concentration. ADA/Alg/Gel hydrogels showed a shear thinning behavior suitable for 3D bioprinting and dependent on ink stabilization time, due to the gradual pH-triggered release of calcium ions over time. AHCFs-laden ADA/Alg/Gel bioinks could be successfully printed producing scaffolds with high shape fidelity and good cell viability post-printing. Finally, 3D AHCF-laden and H9C2-laden ADA/Alg/Gel bioinks with the highest gelatin content (25% w/w) allowed cell adhesion after 24 hours of incubation, showing potential application for cardiac tissue modelling. This research presented a comprehensive framework for advancing the design of bioink formulations enabling the printing of cell-adhesive and self-supporting constructs.

Feasibility study of carbon-fiber reinforced polymer linerless pressure vessel tank

Composite pressure vessels are used in aerospace engineering for storing fluids such as propellants, nitrogen, and oxygen. They are also used in life-support systems, High-performance pressure suits for astronauts, Helium Tanks for Balloons and Airships. Among many types of composites, Carbon fiber composites uses have been increasing due to its high strength to weight ratio, high thermal expansion, corrosion, fatigue and impact resistance and design flexibility. In order to improve the volume of the pressure vessel, the liner-less concept is tried. This increased volume efficiency is crucial in aerospace applications where space is at a premium and maximizing storage capacity within limited dimensions is important. Not only the volume efficiency, but also the Reduced Permeability Concerns, Enhanced Durability and Longevity, better thermal continuity and simplified manufacturing process make this research significant in the area of pressure vessel. This research paper deals with the fabrication and development of a cylinder without a lining. The test sample was subjected to several tests: tensile test, impact, shear test (3P Bending), leak test and Pressure test. The test sample was capable of withstanding 20 Bars without failure. The numerical results were also performed and compared with the experimental results. The difference was only 3%. Unsymmetrical dimethyl hydrazine (UDMH) AND red-fuming nitric acid can both be stored in this cylinder (RFNA). Unlike traditional composite overwrapped pressure vessels, the liner-less composite tanks rely completely on the composite shell to act as a permeation barrier as well as handling all pressure and environmental loads. The absence of a liner eliminates the potential for delamination or failure at the interface between the liner and the composite material.

Optimizing heterostructure parameters towards enhanced toughening in micro/nano-reinforced bimodal-grained Al alloy composites

We manipulated soft coarse-grained (CG) domains to design optimized and toughened B4Cp/6061Al composites, featuring bimodal domains with in-situ MgO nanoparticles (n-MgO) and ex-situ carbon nanotubes (CNTs). Manipulating CG fractions influenced heterostructure parameters such as CG band width and domain distribution. A systematic optimization strategy integrating intrinsic/extrinsic toughening and strengthening mechanisms identified optimal conditions for maximizing strength-ductility-toughness. The optimal 20:80 CG-to-ultrafine-grain (UFG) weight ratio offered an ultimate strength of 550 MPa and ∼7 % elongation. Intrinsic toughening mechanisms enhanced UFG domain dislocation storage capacity. Multiscale analysis of crack behavior revealed pronounced crack-blunting in well-dispersed CG domains. Extrinsic toughening mechanisms included nanobridge formation, crack-deflection, micro-crack proliferation, and crack-branching. Micromechanical behavior was examined using the strain gradient model. Designing strong and ductile micro/nano-reinforced bimodal grained composites requires selecting a smaller amount of CG domains, a CG band width larger than double the interface affected zone (IAZ), and larger grain sizes in the CG domains.

Nitrogen-doped carbon quantum dots (NCQDs) detected to mercury ions in food monitoring

Using 2,3-diaminopyridine and citric acid as precursors, blue fluorescent nitrogen-doped carbon quantum dots (NCQDs) with a narrow size distribution (∼7.2 nm) were prepared and applied in the following assay for mercury ion detection at a weight ratio of 2,3-diaminopyridine:citric acid = 1:1 (0.2 g: 0.2 g, 20 mL for H2O), 220 °C, and 10 h. NCQDs was characterized by TEM, FT-IR, XPS, UV–Vis and EDS, and the prepared NCQDs display excitation-independent behavior due to less surface defects and uniform size. The optimal excitation and emission wavelengths of the NCQDs were 380 nm and 430 nm, respectively. Interestingly, the fluorescence of the NCQDs could be rapidly and selectively quenched by Hg2+ within 9 min at room temperature without further modification. Under optimal conditions, the limit of detection (LOD) was measured to be at the nanomolar level (42.4 nmol/L) with a linear range of 0–5.0 μmol/L, and fluorescence analysis of NCQDs was successfully used for the qualitative and quantitative analysis of mercury ions in food samples. Furthermore, our results revealed that fluorescence quenching occurred under the common fluences of the inner filter effect, and the static quenching effect was authenticated in the process in which Hg2+ coordinates with the NCQDs to form nonfluorescent complexes.

Variables Affecting the Preparation and Characterization of Axitinib as Oral Niosmoes

Axitinib is anticancer drug act on different solid tumors by inhibtion protein kinase enzyme which is responsible for support the tumors with blood demand. Due to its low solubility, it has low bioavailability when given orally also it is affected by liver metabolism. Axitinib formulated as non-ionic vesicles (niosomes) for the first time to study the effect of different variables on the in vitro behaviour of vesicles in a hope to improve drug oral bioavailability. Niosomal dispersion formulas were formulated by diverse techniques via multiple kinds of surface-active agent (tween also span), cholesterol and dicetyl phosphate then evaluated for visual appearance, efficiency of drug entrapment (EE%), size of the vesicles, poly dispersity index, zetapotential, viscosity, invitro drug release and study the vesicles morphology by FE-SEM. Many variables effect on EE% were studied such as effect of surfactant amount and type, effect of surfactant combination, impact of various ratios of cholesterol, impact of DCP in various amount , effect of preparation method and effect of sonication time. The results showed that the EE% between (50.97%-98.24%), the particle size was found within the range (64.5 nm - 530.79 nm), zeta potential which was between ( -16.6 to -31 mV), polydispersity index (PDI) <1 and viscosity between (584 – 889.6) centipoise. The niosomal dispersion F1 which contained 1:1 weight ratio (span60: cholesterol) was found with high EE% (96.5±0.16%), smallest particle size (64.5±0.5 nm), highest drug release (100%) of drug released at the end of 4 hours and FE-SEM photograph showed that niosomes were spherical with no aggregation and had a smooth surface. The results showed that thin film hydration method with sonication for four minutes was the best method for preparation of axitinib niosomes, the type and amount of surfactants used, cholesterol ratio, stabilizer and the time of sonication had a substantial effect on EE%, the size of the vesicles as well as drug release; which were investigated so as to optimize the niosomal dispersion of anti-tumour drug reaching to an optimum formula that may improve drug bioavailability. Key words: Axitinib, Anticancer, Vesicles, Surfactants, Invitro behaviour, Entrapment efficiency.

Synthesis and structural characterization of new chitosan-thiamine hydrochloride molecular complexes

Chitosan is one of the natural cationic polymers used for drug delivery due to its unique properties as an antimicrobial and antioxidant agent. In this work, three new molecular complexes were obtained by mechanically grinding a mixture of chitosan and thiamine hydrochloride in weight ratios of 4:1, 3:2, and 1:1, with a few drops of acetic acid and sodium citrate solutions. Complementary analyses, including X-ray powder diffraction, differential thermal analyses, thermogravimetric analyses, Fourier transform infrared spectroscopy, and CP/MAS 13C NMR, were performed to characterize the new molecular complexes. X-ray diffraction revealed the transformation of chitosan from a semi-crystalline to an amorphous state after mechanochemical grinding. Infrared spectroscopy showed changes in the vibrations of the functional groups CO, OH, and NH in the structure of the developed compounds, indicating the interconnection of the components. Solid-state nuclear magnetic resonance spectroscopy recorded shifts of the resonance lines present in the ball-milled samples, compared to the initial compounds, along with the appearance of new lines, supporting the formation of chitosan-thiamine hydrochloride complexes. Thermal analyses confirmed the successful development of new molecular complexes by the appearance of two new exothermic signals at lower temperatures than those observed for chitosan.

Amine functionalized maleimide grafted MWCNT–CFRP hybrid composites interfacial/matrix healing and mechanical performance through thermally reversible cycloaddition

AbstractRestoration of the structural integrity of damaged CFRP composite through thermally reversible Diels–Alder bonds with the exact interfacial healing between matrix/fiber is extremely desirable for manufacturing of high‐performance self‐healing laminates. This article demonstrates the fabrication of amine‐functionalized maleimide‐grafted MWCNT (with different weight ratios 0.5 wt%, 1.0 wt%, and 1.5 wt%) reinforced thermally reversible self‐healing CFRP composite. The morphological changes, functional elements, elemental groups, and thermal degradation of functionalized‐MWCNTs were characterized by FESEM/HR‐TEM, FTIR, XRD, and TG‐DTA analysis. The results demonstrated that CFRP reinforced with silane/maleimide grafted MWCNT enhanced the dispersion, exhibited 82% healing efficiency and improvement in flexural strength‐67.11%, tensile strength‐64.75% concerning pure‐CFRP. FE‐SEM fractography of composites indicated that nanotube pullout was predominant failure‐criteria in CFRP‐pristine‐MWCNTs whereas strong interfacial adhesion dominated in CFRP‐maleimide‐MWCNTs. The purpose of this article is to investigate matrix/fiber/nanofillers interface healing properties of CFRP‐composite before and after damage. Furthermore, it is intended to reform structural integrity and examines average healing efficiency.Highlights Amine‐functionalized maleimide‐grafted MWCNT, CFRP composite fabrication. Characterized, morphological changes functional elements thermal degradation. Improvement in healing efficiency (82%), flexural strength‐(67.11%). The enthalpy of 0.5 wt% MWCNTBm enhanced to 10.91 J/g. Fractographic examinations show extensive intralaminar/interlaminar deformation.