Wave Form Research Articles

ECG Biometric Verification Incorporating Different Physiological Conditions

The liveness detection criteria of biological signals have become one of the reasons it has been introduced as an ideal biometric recognition system. Electrocardiogram (ECG) is one of the biological signals that records the rhythms of human’s heart in the form of PQRST waves proves the uniqueness of the ECG itself making it suitable to be applied as biometric mechanisms. Previous research had shown the success of proving ECG as a biometric modality however most experimentations were done in normal conditions. Thus, to improve the current research, this work proposed a robust biometric identification by introducing ECG signals incorporating various physiological conditions. After the data collection of cycling, walking, climbing stairs, and jogging, the signals are pre-processed by using MODWT to remove unwanted noises produced during data collection process. Then, Pan Tompkins algorithm is used to segment the QRS complexes. The segmented signals are overlapped and align with each other to observe its pattern. Next, the QRS waveform is classified by using various class of SVM by considering two factors which are same physiological conditions and different physiological conditions. The subjects are compared between same and different physiological condition to validate the proposed method. The results show that the precision achieved up to 100%. In average, Gaussian SVM gives highest precision when compared to other type of SVM classifiers suggesting that Gaussian SVM is the most appropriate to be applied for person identification. Thus, the proposed method proves that biometric recognition can be performed regardless of different physiological conditions and can be applied in real life scenarios.

2D Computational Fluid Dynamics Simulation Analysis of the Assembly of Low‐Temperature Cofired Ceramics/Low‐Temperature Cofired Ceramics and Si/Si Sandwiches by Reactive Bonding

Numerical computational fluid dynamics simulations have been performed on 2D sandwich models to compare the performance of low‐temperature cofired ceramics (LTCC)/LTCC and Si/Si sandwiches used in reactive bonding. In the sandwich model layers of solder, silver and a reactive multilayer used to bond the substrates are modeled. Additional to this, the surrounding air environment is also modeled. For simulating the heat released by the multilayer system, a user‐defined function in the form of a square wave is written for the heat source with a defined width, corresponding to the reaction width, and this propagates at a fixed speed. Two sandwiches, one with LTCC/LTCC, and the other with Si/Si, are simulated and their response analyzed in terms of the solidification/melting of the solder and their respective time–temperature histories.

A new non‐equilibrium modification of the k−ω$$ k-\omega $$ turbulence model for supersonic turbulent flows with transverse jet

AbstractThe goal of this research is to propose a new modification of a non‐equilibrium effect in the turbulence model to better predict high‐speed turbulent flows. For that, the two local compressibility coefficients are included in the balance production/dissipation terms in a specific dissipation rate equation. The specific dissipation rate reacts to changes in the local Mach number and density through these local coefficients. The developed model is applied to the numerical simulation of the spatial supersonic turbulent airflow with round hydrogen injection. In that, the effects of the proposed turbulence model on the flow field behavior (shock wave and vortex formations, shock wave/boundary layer interaction, and mixture layer) are studied via the solution of three‐dimensional Favre‐averaged Navier–Stokes equations with a third‐order Essentially Non‐Oscillatory scheme. A series of numerical experiments are performed, in which an allowable range of local constants by comparing results with experimental data is obtained. The non‐equilibrium modification by simultaneous decrease of the turbulence kinetic energy and increase of the specific dissipation rate gives a good agreement of the hydrogen depth penetration with experimental data. Also, the numerical experiment of the supersonic airflow with a nitrogen jet shows wall pressure distribution is consistent well with experimental data.

Role of Cairns–Gurevich ion distribution on nonlinear wave propagation in negatively charged dusty plasma

The study of dust-acoustic (DA) nonlinear electrostatic waves in dusty plasma is crucial for understanding plasma behavior in both astrophysical and laboratory environments. Dusty plasmas, characterized by the presence of negatively charged dust particles, exhibit complex dynamics influenced by various factors, including nonthermal electron and ion populations following Cairns–Gurevich distributions. This study addresses the problem of understanding wave propagation under these specific conditions by employing a set of fluid hydrodynamic equations for dust fluid, alongside appropriate electron and Cairns–Gurevich ion distributions, to model the dynamics and propagation of DA nonlinear electrostatic waves under specific plasma conditions with negatively charged dust particles. We derived a nonlinear Zakharov–Kuznetsov (ZK) equation to model the evolution of these waves and further transformed it into the nonlinear Schrödinger (NLS) equation to analyze rogue wave formation and identify unstable and stable zones within the plasma. We focused our analysis on the effects of key parameters, such as the nonthermal index, magnetic field strength, negative dust temperature ratio, polarization force, and density ratio, on the behavior of dust-acoustic waves (DAWs). The results demonstrated that soliton waves, explosive waves, and kink waves exhibit distinct behaviors depending on these parameters and the spatial context of Earth's magnetosphere. These findings provide new insights compared to previous studies into the conditions under which these waveforms emerge and evolve, especially in magnetized environments where earlier models were less effective at accurately characterizing or predicting wave behavior. By applying two different analytical methods, a direct integration approach and a generalized Kudryashov method, we expanded our understanding of nonlinear wave phenomena in dusty plasmas. Our results not only advance theoretical knowledge but also have practical implications for interpreting space plasma observations and guiding experimental design in plasma physics research. This study thus contributes to a more comprehensive understanding of plasma dynamics, with potential applications to astrophysical observation and laboratory plasma experimentation.

PIP5K-Ras bistability initiates plasma membrane symmetry breaking to regulate cell polarity and migration.

Symmetry breaking, polarity establishment, and spontaneous cell protrusion formation are fundamental but poorly explained cell behaviors. Here, we demonstrate that a biochemical network, where the mutually inhibitory localization of PIP5K and Ras activities plays a central role, governs these processes. First, in resting cells devoid of cytoskeletal activity, PIP5K is uniformly elevated on the plasma membrane, while Ras activity remains minimal. Symmetry is broken by spontaneous local displacements of PIP5K, coupled with simultaneous activations of Ras and downstream signaling events, including PI3K activation. Second, knockout of PIP5K dramatically increases both the incidence and size of Ras-PI3K activation patches, accompanied by branched F-actin assembly. This leads to enhanced cortical wave formation, increased protrusive activity, and a shift in migration mode. Third, high inducible overexpression of PIP5K virtually eliminates Ras-PI3K signaling, cytoskeletal activity, and cell migration, while acute recruitment of cytosolic PIP5K to the membrane induces contraction and blebs in cancer cells. These arrested phenotypes are reversed by reducing myosin II activity, indicating myosin's involvement in the PIP5K-Ras-centered regulatory network. Remarkably, low inducible overexpression of PIP5K unexpectedly facilitates polarity establishment, highlighting PIP5K as a highly sensitive master regulator of these processes. Simulations of a computational model combining an excitable system, cytoskeletal loops, and dynamic partitioning of PIP5K recreates the experimental observations. Taken together, our results reveal that a bistable, mutually exclusive localization of PIP5K and active Ras on the plasma membrane triggers the initial symmetry breaking. Coupled actomyosin reduction and increased actin polymerization lead to intermittently extended protrusions and, with feedback from the cytoskeleton, self-organizing, complementary gradients of PIP5K versus Ras steepen, raising the threshold of the networks at the rear and lowering it at the front to generate polarity for cell migration.

Surface wave phenomenon and microstructure evolution mechanism of electromagnetically levitated ternary Ti-Al-Fe alloy

Electromagnetic levitation technique was performed to investigate the surface wave phenomenon and microstructure evolution mechanism of undercooled ternary Ti50Al30Fe20 alloy. Under the condition of high undercooling, the formation process of surface waves on the levitated alloy surface were directly detected by high-speed camera. The cooling gas provided the external perturbation that promoted surface nucleation, providing the suitable site for surface wave generation. On the rotating semisolid alloy surface, the competition between centrifugal force and surface tension caused the surface wrinkling, leading to the formation of surface waves. The residual liquid phase was solidified in the vortex circulation flow, and the vortex-shape pattern was preserved during rapid solidification. With the increases of undercooling, the microstructure evolved from dendrites and interdendritic lamellar eutectics into uniform anomalous eutectics because of the independent nucleation and competitive growth of (βTi) and TiFe phase. The surface wave was formed only at high undercoolings, indicating this phenomenon was related to the fluidity in eutectic growth. In this case, the uniform microstructure was closer to satisfying the continuum medium hypothesis, and the homogeneous medium reduced the energy damage during wave propagation. In addition, the micromechanical properties were remarkably increased as undercooling rose owing to the microstructural morphology and solute trapping effect.

Generation of arbitrary vector orbital angular momentum beams on higher-order Poincaré spheres based on an all-dielectric metasurface with complex amplitude modulation

Vector orbital angular momentum (OAM) beams, described by higher-order Poincaré (HOP) sphere, are generalized forms of waves carrying OAM with an inhomogeneous polarization of wavefronts. We construct all-dielectric metasurfaces with adjustable amplitude, polarization, and phase to generate arbitrary vector OAM beams. The metasurface is composed of two pairs of silicon nanopillars arranged alternately. Using the interference effect of the four meta-atoms related to the circular polarization, combined with the propagation and geometric phases, two OAM beams with controlled amplitude, phase, and equal topological charge but opposite signs can be obtained under the incidence of orthogonally circularly polarized lights. For the x linearly polarized light, arbitrary vector OAM beams on the HOP sphere are generated via the superposition of the above OAM beams. Additionally, the evolution process of the beam on the longitude and latitude of the Poincaré sphere is revealed by changing the amplitude and phase of the two OAM beams. This work provides a simple, effective, and flexible method for realizing vector OAM beams while having potential implications for the generation and manipulation of vectorial light fields at the micro-nano scale.

The Relationship between Cardiomyocyte Action Potentials and Ion Concentrations: Machine Learning Prediction Modeling and Analysis of Spontaneous Spiral Wave Generation Mechanisms

The changes in cardiomyocyte action potentials are related to variations in intra- and extracellular ion concentrations. Abnormal ion concentrations can lead to irregular action potentials, subsequently affecting wave propagation in myocardial tissue and potentially resulting in the formation of spiral waves. Therefore, timely monitoring of ion concentration changes is essential. This study presents a novel machine learning classification model that predicts ion concentration changes based on action potential variation data. We conducted simulations using a single-cell model, generating a dataset of 850 action potential variations corresponding to different ion concentration changes. The model demonstrated excellent predictive performance, achieving an accuracy of 0.988 on the test set. Additionally, the causes of spontaneous spiral wave generation in the heart are insufficiently studied. This study presents a new mechanism whereby changes in extracellular potassium ion concentration leads to the spontaneous generation of spiral waves. By constructing composite myocardial tissue containing both myocardial and fibroblast cells, we observed that variations in extracellular potassium ion concentration can either trigger or inhibit cardiomyocyte excitation. We developed three tissue structures, and by appropriately adjusting the extracellular potassium ion concentration, we observed the spontaneous generation of single spiral waves, symmetrical spiral wave pairs, and asymmetrical double spiral waves.

Numerical studies on the radiation of micro-pressure wave noise at the tunnel exits

To effectively control the micro-pressure wave noise radiating from tunnel exits, numerical simulations were conducted to investigate the generation and propagation of such noise at the exits of high-speed metro tunnels. Large-eddy simulation was employed to obtain the near-field unsteady flow field data at the tunnel exit. The Ffowcs Williams–Hawkings (FW–H) acoustic analogy was used to predict the types of sound sources for micro-pressure wave noise. The unsteady flow field data were also utilized for finite element method acoustic analysis to calculate the far-field radiation of micro-pressure wave noise. The accuracy of the numerical methods was verified through moving model tests. The results indicate that dipole noise dominates within the micro-pressure wave noise. The tunnel's inner wall contributes most to the dipole sound sources. Dipole noise radiates outward in the form of semi-ellipsoidal waves, with energy mainly concentrated below 20 Hz and a peak frequency of 4 Hz. Furthermore, the decay of dipole noise in the direction of the tunnel exit follows a similar exponential decay pattern to that of an explosion shock wave. When the train speed exceeds 400 km/h, the human ear can distinctly perceive the sonic booms at the tunnel exit.

Experiments on critical behavior of oblique detonation wave in stratified mixtures

Two-stage gas-gun ballistic experiments are performed to investigate the feasibility of stratified mixtures with variable global equivalence ratios Φglobal for the formation of sphere-induced oblique detonation wave (ODW) and quantify their critical behaviors, which include local quenching and transitional structure to ODW, by testing conventional detonation criteria for uniform mixtures. 2 Φglobal H2 + O2 + 3Ar mixtures are tested with different concentration gradients for each fuel-lean/fuel-rich global composition. Opposite responses are observed depending on the global equivalence ratio: the lean mixture of Φglobal = 0.7, which forms ODW in the uniform mixture, fails partly in the strongest stratification, whereas the richest mixture of Φglobal = 2.0 turns to ODW in the strongly stratified conditions. As elucidated in the authors' previous work, Chapman–Jouguet (C–J) theory, including the curvature effects, reproduces the wave angles of the stable ODWs, as well as provides a good prediction on the local quenching of ODW occurring in the area with less reactive composition. Comparison of different wave regimes observed in the explored conditions reveals that wave curvature governs the critical behaviors of ODW far away from the projectile, whereas the initiation structure around the projectile is also influenced by the non-dimensional diameter. Surface energy theory is proven to quantify well the initiation structure on the projectile using a local equivalence ratio. These results indicate a new possibility of controlling the methodology of ignition and stabilization of detonation in aerospace engines, in which perfect mixing is difficult and non-stoichiometric and non-uniform mixtures are expected.

Space–time adaptive ADER-DG finite element method with LST-DG predictor and a posteriori sub-cell ADER-WENO finite-volume limiting for multidimensional detonation waves simulation

The space–time adaptive ADER–DG finite element method with LST–DG predictor and a posteriori sub–cell ADER–WENO finite–volume limiting was used for simulation of multidimensional reacting flows with detonation waves. The presented numerical method does not use any ideas of splitting or fractional time steps methods. The modification of the LST–DG predictor has been developed, based on a local partition of the time step in cells in which strong reactivity of the medium is observed. This approach made it possible to obtain solutions to classical problems of flows with detonation waves and strong stiffness, without significantly decreasing the time step. The results obtained show the very high applicability and efficiency of using the ADER–DG–PN method with a posteriori sub–cell limiting for simulating reactive flows with detonation waves. The numerical solution shows the correct formation and propagation of ZND detonation waves. The structure of detonation waves is resolved by this numerical method with subcell resolution even on coarse spatial meshes. The smooth components of the numerical solution are correctly and very accurately reproduced by the numerical method. Non–physical artifacts of the numerical solution, typical for problems with detonation waves, such as the propagation of non–physical shock waves and weak detonation fronts ahead of the main detonation front, did not arise in the results obtained. The results of simulating rather complex problems associated with the propagation of detonation waves in significantly inhomogeneous domains are presented, which show that all the main features of detonation flows are correctly reproduced by this numerical method. It can be concluded that the space–time adaptive ADER–DG–PN method with LST–DG predictor and a posteriori sub–cell ADER–WENO finite–volume limiting is perfectly applicable to simulating fairly complex reacting flows with detonation waves.

Numerical study on the polarity change process during internal wave shoaling

Polarity change is an important mechanism for internal waves shoaling. In this study, a numerical model for simulating the real-scale internal wave passing over slope-shelf topography is established based on the Fourier pseudo-spectral method and weakly nonlinear theory. By numerical simulation, the effects of shelf height, initial wave amplitude, and inclination angle on the waveform characteristics and energy properties of the internal wave during its shoaling are investigated. In the polarity change process, the initial internal wave converts into a depression wave and a generated elevation wave behind it. The distance between the peak of the elevation wave and the trough of the depression wave is a key feature to describe the polarity change. In terms of energy properties, the energy ratio of depression and generated elevation waves compared with the initial wave as well as their relative magnitude is mainly determined by the shelf height. In addition, the initial wave amplitude also affects the generation of the elevation wave and the attenuation of the depression wave to a certain extent. The increase in the inclination angle hinders the formation of the elevation wave but has little effect on the depression wave energy.

Capillary wave-assisted collapse of non-Newtonian droplets

Understanding the peripheral capillary wave propagation during droplet impact is crucial for comprehending the physics of wetting onset and droplet fragmentation. Although Newtonian droplets have been extensively studied, we show how capillary waves deform non-Newtonian droplets in such a way that rheological features, such as the critical concentrations for the overlap (c*) and entangled polymer molecules (c**), may be directly obtained from the deformation history. Determining these critical concentrations is essential as they mark transitions in the rheological behavior of aqueous polymeric solutions, influencing viscosity, elasticity, and associated fluid dynamics. We have also compared capillary waves among Newtonian, shear-thinning, and Boger fluid droplets and found that although the fluid kinematics appear to be purely biaxial extensional flow, the infinite-shear properties of the droplets dominate the physics of capillary wave formation and propagation.

Computational investigation of both geometric and fluidic compressible turbulent thrust vectoring, using a Coanda based nozzle

This study addresses the challenge of enhancing aircraft maneuverability, particularly for vertical landing and takeoff, focusing on the fluidic aerial Coanda high efficiency orienting jet nozzle that employs the Coanda effect to achieve thrust vectoring. This research advances understanding of the interplay between geometric and fluidic factors in thrust vectoring. Stationary, turbulent, and compressible flow conditions are assumed, employing Favre-averaged Reynolds-averaged Navier–Stokes approach with the standard k-ε model. Computational solutions were obtained using a pressure-based finite volume method and a structured computational grid. The key findings include thrust vectoring enhancement due to an increase in the total mass flow rate, septum position (at no shock wave-related issues), and Reynolds number. In addition, shock wave formation (at specific mass flow rates and septum positions) considerably affects thrust vectoring. These insights are crucial for optimizing Coanda-based nozzle design in advanced propulsion systems, including in unmanned aircraft vehicles.

Sliding Dynamics of Current-Driven Skyrmion Crystal and Helix in Chiral Magnets.

The skyrmion crystal (SkX) and helix (HL) phases, present in typical chiral magnets, can each be considered as forms of density waves but with distinct topologies. The SkX exhibits gyrodynamics analogous to electrons under a magnetic field, while the HL state resembles topological trivial spin density waves. However, unlike the charge density waves, the theoretical analysis of the sliding motion of SkX and HL remains unclear, especially regarding the similarities and differences in sliding dynamics between these two spin density waves. In this Letter, we systematically explore the sliding dynamics of SkX and HL in chiral magnets in the limit of large current density. We demonstrate that the sliding dynamics of both SkX and HL can be unified within the same theoretical framework as density waves, despite their distinct microscopic orders. Furthermore, we highlight the significant role of gyrotropic sliding induced by impurity effects in the SkX state, underscoring the impact of nontrivial topology on the sliding motion of density waves. Our theoretical analysis shows that the effect of impurity pinning is much stronger in HL compared with SkX, i.e., χ^{SkX}/χ^{HL}∼α^{2} (χ^{SkX}, χ^{HL}: susceptibility to the impurity potential, α (≪1) is the Gilbert damping). Moreover, the velocity correction is mostly in the transverse direction to the current in SkX. These results are further substantiated by realistic Landau-Lifshitz-Gilbert simulations.

Fallopian tube rheology regulates epithelial cell differentiation and function to enhance cilia formation and coordination

The rheological properties of the extracellular fluid in the female reproductive tract vary spatiotemporally, however, the effect on the behaviour of epithelial cells that line the tract is unexplored. Here, we reveal that epithelial cells respond to the elevated viscosity of culture media by modulating their development and functionality to enhance cilia formation and coordination. Specifically, ciliation increases by 4-fold and cilia beating frequency decreases by 30% when cells are cultured at 100 mPa·s. Further, cilia manifest a coordinated beating pattern that can facilitate the formation of metachronal waves. At the cellular level, viscous loading activates the TRPV4 channel in the epithelial cells to increase intracellular Ca2+, subsequently decreasing the mitochondrial membrane potential level for ATP production to maintain cell viability and function. Our findings provide additional insights into the role of elevated tubal fluid viscosity in promoting ciliation and coordinating their beating—a potential mechanism to facilitate the transport of egg and embryo, suggesting possible therapeutic opportunities for infertility treatment.

Method for profile reconstruction of the workpiece surface during groove micromilling

A leading trend in modern industry is hybrid manufacturing methods. The intention is to integrate additive and subtractive methods into a single machine. In such a process, it is difficult to evaluate the quality of the manufactured component between successive processes. A solution that would make it possible to determine the quality of a component produced by incremental technologies on the basis of forces recorded in a machining process is not yet available. In the present study, an attempt was made to reconstruct the surface of the machined workpiece solely on the basis of recorded forces during the groove micromilling process. A workpiece with a known surface geometry in the form of a sinuous wave was machined. The geometry of the workpiece corresponded to a structure typical of the selective laser sintering method for metallic powders. A process conducted with two different axial cutting depths was considered. The reconstructed surface profiles were evaluated by comparative analysis with the real machined surface.

Unconfined gravity current interactions with orthogonal topography: Implications for combined‐flow processes and the depositional record

ABSTRACTTurbidity current behaviour is affected by interactions with seafloor topography. Changes in flow dynamics will depend on the orientation and gradient of the topography, and the magnitude and rheology of the incoming flow. A better understanding of how unconfined turbidity currents interact with topography will improve interpretations of the stratigraphic record, and is addressed herein using three‐dimensional flume tank experiments with unconfined saline density currents that enter a horizontal basin before interacting with a ramp orientated perpendicular to flow direction. The incoming flow parameters remained constant, whilst the slope angle was independently varied. On a 20° slope, superelevation of the flow and flow stripping of the upper, dilute region of the flow occurred high on the slope surface. This resulted in a strongly divergent flow and the generation of complex multidirectional flows (i.e. combined flows). The superelevation and extent of flow stripping decreased as the slope angle increased. At 30° and 40°, flow reflection and deflection, respectively, are the dominant flow process at the base of slope, with the reflected or deflected flow interacting with the parental flow, and generating combined flows. Thus, complicated patterns of flow direction and behaviour are documented even on encountering simple, planar topographies orientated perpendicular to flow direction. Combined flows in deep‐water settings have been linked to the interaction of turbidity currents with topography and the formation of internal waves with a dominant oscillatory flow component. Here, combined flow occurs in the absence of an oscillatory component. A new process model for the formation and distribution of hummock‐like bedforms in deep‐marine systems is introduced. This bedform model is coupled to a new understanding of the mechanics of onlap styles (draping versus abrupt pinchout) to produce a spatial model of gravity‐current interaction, and deposition, on slopes to support palaeogeographical reconstructions.

Computational study on complex wave hydrodynamics of multidirectional extreme waves at fringing reef

Due to the special topography of coral reefs, most of the energy of incoming waves can be reduced through the wave breakings at the reef edge, thus playing a vital role in protecting the coastal regions behind coral reefs. In severe weather conditions, wind-generated waves tend to propagate in multiple directions in real ocean environment. The abrupt multidirectional wave-focusing mechanisms may result in the formation of huge waves in both deep and shallow waters, threatening the safety of coastal infrastructures and well-being of coastal communities at the reef islands. Therefore, it is crucial to thoroughly examine the complex hydrodynamics of multidirectional extreme waves at the fringing reefs. Previous studies on reef wave hydrodynamics predominantly focus on unidirectional waves. Only a small number of studies have considered the wave hydrodynamics of fringing reefs under multidirectional waves, let alone multidirectional extreme waves. To address the knowledge gap in previous studies, this study analyzes the complex hydrodynamic processes of multidirectional extreme waves at the fringing reef by applying a nonhydrostatic numerical wave model (NHWAVE). Influences of several key factors are analyzed, such as significant wave height, peak wave period, water depth, incident wave angle, and reef topography. It is expected that the research findings of this study will contribute to a deeper understanding of the hydrodynamics of multidirectional extreme waves at the fringing reef.

Research on the sub-millisecond underwater electrical wire explosion process

Abstract Underwater electric wire explosion (UEWE) has great potential as a shockwave source for medical and industrial applications. This paper focuses on the process of the sub-millisecond underwater electrical wire explosion (smUEWE). The study compared the smUEWE and the microsecond underwater electrical wire explosion, which revealed the occurrence of partial vaporization under smUEWE, leading to the formation of bamboo-shaped cavities and frontal shock waves. The experiments of smUEWE were carried out under different stored energy, the results indicated the plasma shrinkage and cavity separation during the overall ionization process. Additionally, the study observed secondary breakdown caused by the uneven distribution of ionization products. An analysis was conducted on smUEWE considering partial vaporization, which divided the electrical explosion into a positive feedback process which promoted the axial instability and a negative feedback process which formed the uniform plasma channel. The analysis results was consistent with the experimental results.