Warmer Months Research Articles

Seasonal Dynamics in Burn Profiles: A Comprehensive Retrospective Analysis at the Burn Care Centre, PIMS, Islamabad (2016-2022).

Seasons have a major impact on the frequency and characteristics of burn injuries; in warmer months, thermal burns from outdoor activities are more common, while in cooler months, incidents involving heating sources and fires are more common. It is essential to comprehend these trends in order to customize safety precautions and awareness initiatives. Studies on the impact of seasonal variations help burn centers allocate resources more effectively in order to prepare for variations in patient volume and severity. Data from January 2016 to December 2022, with an emphasis on burn types excluding nonburn cases, were analyzed retrospectively over a 7-year period at the Burn Care Centre in Pakistan Institute of Medical Sciences, Islamabad. The research examined hospital stays, demographics, burn causes, admissions, total burned surface area, and death rates while dividing the years into winter and summer seasons for analysis. With 4014 admitted patients, the study found that winter admissions increased by 11.007%, with winter admissions accounting for 55.503% of all admissions and summer admissions for 44.496%. The gender distribution stayed the same, with 54.59% of the population being male and 45.99% being female. Hospital stays were longer for summer admissions (16.428) than for winter admissions (11.285). Summertime saw a rise in electric burn cases (307 cases), with a 43 case fatality rate. With 1699 cases, flame burns predominated in the epidemiology of burns, followed by scald burns with 1384 cases. In conclusion, seasonal differences have a substantial impact on burn profiles, with winter seeing a marked rise in occurrences. Men are also more likely to sustain electric burns, particularly in the summer. Effective management and prevention techniques depend on an understanding of these patterns.

Killer whales habitat suitability in the Iberian Peninsula and the Gulf of Biscay: Implications for conservation

This study addresses existing gaps in our understanding of the ecology of killer whales by investigating their habitat use dynamics in the Atlantic coastal waters of North Africa, the Iberian Peninsula, and the Gulf of Biscay. Despite previous research on their distribution during the Atlantic Bluefin tuna migration in the Strait of Gibraltar and adjacent waters, substantial knowledge gaps persist, particularly regarding their movement patterns beyond these regions and seasonal variations in habitat use. Utilizing killer whale occurrence records from 2020 to 2023 and considering environmental factors influencing prey presence, we employed seasonal spatial distribution models. MaxEnt models exhibited robust predictive performance, emphasizing distance to shore, depth, and sea surface temperature as key factors influencing killer whale habitat suitability. Spatial distribution patterns reveal a peak in coastal waters of the southern Iberian Peninsula and North Africa during winter and spring, with a significant shift northward and expansion during summer and autumn towards the Gulf of Biscay. This expansion suggests a broader distribution of killer whales in the Northeast Atlantic during warmer months, encompassing a diverse range of habitats. The research underscores a substantial interaction (47%) between killer whales and recreational vessels, posing concerns for both the killer whales and maritime safety. This study provides valuable insights on killer whale habitat use in the Atlantic waters from North Africa to the Gulf of Biscay, thereby supporting conservation and management efforts in the region.

Seasonal population dynamics and impact of abiotic factors on plant parasitic nematodes under temperate conditions of Kashmir, India

Plant parasitic nematodes (PPNs) pose a significant threat to the successful cultivation of grapevines globally. Abiotic parameters such as temperature, moisture and pH critically influence nematode population growth. Ecological investigation was conducted on three grapevine cultivars (Sahibi, Hussaini and Thompson) in Kashmir, India, from January 2021 to December 2022. The population dynamics of the identified PPNs around the grapevine rhizosphere were studied in relation to various factors. Nematode abundance peaked during the warm months of the summer season and dipped during winter. Soil and air temperatures positively correlated with the abundance of nematodes; however, soil moisture and rainfall showed a negative correlation. This study underscores the critical role of environmental factors on the population dynamics of plant parasitic nematodes, with temperature being an important influential factor. Effective nematode management in grapevine cultivation requires a thorough understanding of these dynamics to mitigate the impact of these parasites.

Analysis of Water Temperature Variations in the Yangtze River’s Upper and Middle Reaches in the Context of Cascade Hydropower Development

The establishment and operation of cascade reservoirs in the mainstream of the upper and middle reaches of the Yangtze River have changed the river’s thermal regimes. This study analyzed the correlation between water temperature and its influencing factors and employed various evaluation indexes—including ∆T (the temperature-increasing index, °C/100 km), IEC (the extreme fluctuation index), IBD (the baseline deviation index), and IPO (the phase offset time index). The aim was to uncover the variation characteristics and influencing factors of water temperature and quantify the impact of cascade reservoir construction on annual and seasonal water temperature rhythms. Our findings show that the construction and operation of cascade reservoirs weaken the synchronization of water temperature and air temperature downstream. The construction and operation of cascade reservoirs in the middle and lower reaches of the Jinsha River led to obvious homogenization, baseline deviation, and lagging effects on water temperature downstream, which intensified with the increase in storage capacity. These effects were more pronounced in colder months compared to warmer months. Additionally, the influence of tributaries and water–air heat exchange on these effects is alleviated to different degrees. These results are significant for assessing river ecological health in the context of cascade hydropower development.

Identification and seasonal variation of specific particulate bound (halogenated) polycyclic aromatic hydrocarbons in air from different metal industrial parks in Northwest China.

During the process of industrial heating, a large amount of polycyclic aromatic hydrocarbons (PAHs) and their halogenated compounds (Cl/Br-PAHs) can be formed. However, there is still limited understanding of the chemicals from different metal smelting industrial parks. This study evaluated the seasonal variations, composition profiles, and source allocations of the atmospheric particulate-bound PAHs and Cl/Br-PAHs in different metal industrial parks in a typical industrial city in northwest China. The results showed that the main PAHs produced by metal smelting were low molecular weight isomers, and the concentrations of Cl-PAHs were lower compared to Br-PAHs. The main Br-PAHs were 1-Br-Pyr and 4-Br-Pyr, while 9-Cl-Fle, 1-Cl-Pyr, and 6-Cl-BaP were the dominated Cl-PAH isomers. No significant difference was found in the concentrations among the sites, whereas the levels of the target chemicals were higher during cold months compared to warm months. The main source of PAHs was coal combustion and gasoline vehicle emission during metal smelting, and that of Cl/Br-PAHs was also industrial coal burning. In addition to the primary source, the secondary chlorination of parent PAHs was also a significant source of Cl-PAHs in the production of high purity aluminum. This study suggests that Cl-PAHs and Br-PAHs may behave differently in the atmosphere.

Water residence time is an important predictor of dissolved organic matter composition and drinking water treatability

Freshwater ecosystems are critical resources for drinking water. In recent decades, dissolved organic matter (DOM) inputs into aquatic systems have increased significantly, particularly in central and northern Europe, due to climatic and anthropogenic drivers. The associated increase in dissolved organic carbon (DOC) concentration can change lake ecosystem services and adversely affect drinking water treatment processes. In this study, we examined spatial and temporal patterns of DOM treatability with granular activated carbon (GAC) and biological reactivity based on 14-day bacterial respiration incubations at 11 sites across Mälaren during six-time points between July 2019 and February 2021. Mälaren is the third largest lake in Sweden and provides drinking water for over 2 million people including the capital city Stockholm. In our spatio-temporal analysis, we assessed the influence of phytoplankton abundance, water chemistry, runoff, and climate on DOM composition, GAC removal efficiency, and biological reactivity. Variations in DOM composition were characterized using optical measurements and Orbitrap mass spectrometry. Multivariate statistical analyses indicated that DOM produced during warmer months was easier to remove by GAC. Removal efficiency of GAC varied from 41 to 87 %, and the best predictor of treatability using mass spectrometry was double bond equivalents (DBE), while the best optical predictors were specific UV absorbance (SUVA), and freshness index. The oxygen consumption rate (k) from the bacterial respiration incubations ranged from 0.04 to 0.71 d−1 and higher in warmer months and at deeper basins and was associated with more aliphatic and fresh DOM. The three deepest lake basins with the longest water residence time (WRT) were temporally the most stable in terms of DOM composition and had the highest DOC removal efficiency and k rates. DOM composition in these three lake basins was optically clearer than in basins located closer to terrestrial inputs and had a signature suggesting it was derived from in-lake processes including phytoplankton production and bacterial processing of terrestrial DOM. This means that with increasing WRT, DOM derived from terrestrial sources shifts to more aquatically produced DOM and becomes easier to remove with GAC. These findings indicate WRT can be highly relevant in shaping DOM composition and thereby likely to affect its ease of treatability for drinking water purposes.

Insight into the correlation between total ginkgotoxin and tree ages, geographical locations, and climatic factors

Ginkgo biloba L. seeds are used for food and medicinal purposes in China, but excessive consumption of them can cause acute toxicity. Ginkgotoxin (MPN) and its-5’-glucoside (MPNG) are the main toxic substances in ginkgo seeds. Ginkgo biloba L. trees are widely cultivated in China, and there are fewer studies on total ginkgotoxin (TMPN, MPN and MPNG) in ginkgo from different regions, which is the main motivation for this work. We determined the levels of TMPN in ginkgo seed samples from different regions of China (24.44–41.19 °N, 98.68–124.43 °E), which ranged from 140.96 ± 4.19 μg/g to 537.14 ± 10.78 μg/g. We found that all 131 ginkgo seed samples contained TMPN. Pearson's correlation was performed to analyze the correlation between the TMPN, tree age, geographical location, and climatic factors. The study showed that for geographical factors, longitude was significantly positively correlated with TMPN, and altitude was significantly negatively correlated with TMPN. Regarding climatic factors, mean annual temperature (MAT) and mean warmest month temperature (MWMT) were significantly and positively correlated with TMPN. Our results contribute to a better understanding of the distribution of TMPN in ginkgo seeds in China and lay a scientific foundation for improving low toxicity and safe ginkgo food ingredients.

Air quality challenges in Central Asian urban areas: a PM2.5 source apportionment analysis in Dushanbe, Tajikistan.

This work presents the first comprehensive assessment of PM pollution sources in Dushanbe, Tajikistan. A total of 138 PM2.5 samples were collected during 2015-2016 and 2018-2019 and were analyzed through gravimetric, ED-XRF, and multi-wavelength absorption techniques. The results show that PM2.5 concentrations were substantially higher than the European annual limit value and WHO Air Quality Guidelines annual average value, with an average of 90.9 ± 68.5μgm-3. The PMF application identified eight sources of pollution that influenced PM2.5 concentration levels in the area. Coal burning (21.3%) and biomass burning (22.3%) were the dominant sources during the winter, while vehicular traffic (7.7%) contributed more during the warm season. Power plant emissions (17.5%) showed enhanced contributions during the warm months, likely due to high energy demand. Cement industry emissions (6.9%) exhibited significant contribution during the cold period of 2018-2019, while soil dust (11.3%) and secondary sulphates (11.5%) displayed increased contribution during the warm and cold months, respectively. Finally, waste burning (1.5%) displayed the lowest contribution, with no significant temporal variation. Our results highlight the significant impact of anthropogenic activities, and especially the use of coal burning for energy production (both in power plants and for residential heating), and the significant contribution of biomass burning during both warm and cold seasons.

Lake depth, a key parameter regulating evaporation in semi‐arid regions: A case study from Dali Lake, China

AbstractAs climate change intensifies, understanding the dynamics of lake evaporation is imperative, especially in semi‐arid regions where water resources are already scarce. This study examines the regulatory role of lake depth on evaporation rates, focusing on a terminal lake in a semi‐arid region: Dali Lake in China. Using the Complementary Relationship Lake Evaporation model, we simulated the heat and temperature lag time of Dali Lake, an 8 m deep lake, due to its heat storage capacity. This approach was validated through moderate‐resolution imaging spectroradiometer (MODIS)‐based surface temperatures of Dali Lake and adjacent Ganggenor Lake. Dali Lake, by storing heat during the warmer months, maintains lower surface temperatures compared with the shallower Ganggenor Lake. Under the same climatic conditions, Dali Lake has an annual evaporation of 980 mm, which is 45 mm less than that of Ganggenor Lake, which has an annual evaporation of 1024 mm. To further study the impact of lake depth, we simulated the heat storage and evaporation of Dali Lake during the Holocene, when the lake reached up to 34 m average depth, representative of the maximum depth reached by Dali Lake. During the Holocene, under constant climate conditions, the annual evaporation would be 44 mm/year less than the average evaporation from 1984 to 2016. Average annual evaporation decreased with increasing depth, showing a significant reduction during warmer months, while the release of heat during the ice‐cover period did not result in additional evaporation. Our results highlight the important relationship between lake depth and evaporation under climate change, emphasizing the necessity for depth‐specific water management strategies in semi‐arid regions.

Estuarine residency and habitat preferences of Atlantic Tripletail in the northwestern Gulf of Mexico

AbstractObjectiveThe Atlantic Tripletail Lobotes surinamensis is a globally distributed subtropical and tropical fish species that inhabits estuaries throughout the northern Gulf of Mexico (GOM), particularly during warm months. Little is known about distribution and residency patterns within estuaries, as the species is rarely caught in the recreational fishery, and virtually no commercial fishery exists for the species in the GOM.MethodsWe used data from a long‐term fishery‐independent gill‐net survey to model estuarine distribution throughout Texas and to relate environmental variables to the Atlantic Tripletail catch.ResultAlthough there were no observable temporal trends in catch over the time series (1990–2022), the most recent 6 years included record catch in six of the 10 major Texas estuaries, possibly indicating a recent pulse in abundance. Catch throughout the time series was spatially aggregated in a small number of “hot spots” observed coastwide. Latitude was the best predictor of catch, although wind fetch and wind aspect (wind direction in relation to shoreline direction) were important predictors, and catch was highest near GOM inlets. The Texas Parks and Wildlife Department gill‐net sampling program caught a range of Atlantic Tripletail between 171 and 880 mm total length, indicating a potential gear bias against juveniles.ConclusionDespite this gear bias, these data shed light on the factors that drive Atlantic Tripletail estuarine distribution and abundance in the northwestern GOM. Wind‐driven passive movements in the estuary, combined with active selection of polyhaline habitats near GOM inlets, might be primary drivers of Atlantic Tripletail catch, thus supporting findings from previous studies.

Bumble bee responses to climate and landscapes: Investigating habitat associations and species assemblages across geographic regions in the United States of America.

Bumble bees are integral pollinators of native and cultivated plant communities, but species are undergoing significant changes in range and abundance on a global scale. Climate change and land cover alteration are key drivers in pollinator declines; however, limited research has evaluated the cumulative effects of these factors on bumble bee assemblages. This study tests bumble bee assemblage (calculated as richness and abundance) responses to climate and land use by modeling species-specific habitat requirements, and assemblage-level responses across geographic regions. We integrated species richness, abundance, and distribution data for 18 bumble bee species with site-specific bioclimatic, landscape composition, and landscape configuration data to evaluate the effects of multiple environmental stressors on bumble bee assemblages throughout 433 agricultural fields in Florida, Indiana, Kansas, Kentucky, Maryland, South Carolina, Utah, Virginia, and West Virginia from 2018 to 2020. Distinct east versus west groupings emerged when evaluating species-specific habitat associations, prompting a detailed evaluation of bumble bee assemblages by geographic region. Maximum temperature of warmest month and precipitation of driest month had a positive impact on bumble bee assemblages in the Corn Belt/Appalachian/northeast, southeast, and northern plains regions, but a negative impact on the mountain region. Further, forest land cover surrounding agricultural fields was highlighted as supporting more rich and abundant bumble bee assemblages. Overall, climate and land use combine to drive bumble bee assemblages, but how those processes operate is idiosyncratic and spatially contingent across regions. From these findings, we suggested regionally specific management practices to best support rich and abundant bumble bee assemblages in agroecosystems. Results from this study contribute to a better understanding of climate and landscape factors affecting bumble bees and their habitats throughout the United States.

From current to potential distribution: the case of Taxus baccata(Taxaceae, Pinales) on the island of Sardinia (Italy)

Taxus baccata is a relic-declining species, especially at the southern edge of its natural distribution. On the Island of Sardinia, we found 237 locations where yews grow, being indifferent to substrates, preferring moist sites with northern aspects and with an elevation range of 695–1,225 m a.s.l. We applied the Maximum Entropy algorithm (MaxEnt), using 202 field-based sites and 19 bioclimatic variables, to model the present potential distribution. Our model showed high levels of predictive performances with significant values of AUC (training, 0.962; test, 0.963). Annual precipitation, mean temperature of the warmest month and isothermality were the key drivers for the distribution of yew in Sardinia. The response curves showed that T. baccata prefers annual mean temperatures ranging from 8.65 to 12.55 °C and annual mean precipitation from 770 to 1,085 mm. Most potential suitable conditions were found in northern and central Sardinia. We also modelled future habitat suitability for T. baccata under two different scenarios (ssp245 and ssp585), highlighting a predicted drastic reduction, up to >95% in the worst scenario, of the habitat suitability for yews by the end of this century. This is related to climate change and poses increasing concerns about the future of yews in Sardinia.

Response of Species to the Impact of Climate Change in the Gum Arabic Belt, Sudan: A Case Study in Acacia senegal

Sustainable management strategies of trees are important for indigenous agroforestry plant species, such as Acacia. Senegal (A. Senegal), due to the impacts of rapid population growth, land use and climate change. The objective of this investigation was to predict the spatio-temporal distribution of A.senegal in the Gum Arabic belt in Sudan in current (1985–2000) and future climate scenarios (2021–2100). Bioclimatic data was used for modeling purposes utilizing Maxent, with the assessment of model precision conducted through the utilization of the Area Under the Curve (AUC) and shown a high goodness-of-it (AUC=0.905±0.003 ). Significant differences were shown in species distribution between current and future periods under selected Shared Socioeconomic Pathways (SSPs) of SSP2-4.5 and SSP5-8.5, climate scenario. Our findings indicated that the main predictors influence the distribution of the species were precipitation of wettest quarter and maximum temperature of warmest month. Under the current potential distribution (25.4%), it is projected that Acacia Senegal would expand 36.2%-87.7% (SSP2-4.5) and 38.9-42.5% (SSP5-8.5). It is expected that A.cacia Senegal will create new environments suitable for it due to expected climate changes. Hence, the research necessitates the formulation of a strategic plan aimed to rehabilitation plantations of Acacia senegal and cultivation these species within existing and prospective habitats conducive to their existence.

Does Engine Oil Type Affect Fuel Consumption in Passenger Vehicles? A Two-Year Investigation

Reducing fuel consumption to decrease CO2 emissions has become a key development factor in the automotive industry. An effective way to decrease fuel consumption is to reduce the influence of various sources of energy loss. One way to increase engine efficiency is to use low-viscosity engine oils to reduce friction losses in the engine’s tribological systems. The aim of the article was to analyze the relationship between the type of engine oil and fuel consumption in a group of 12 passenger cars. This was a homogenous group of identical cars, equipped with the same engine, operated under very similar conditions. Three groups of engine oils (Revline, Total, Orlen) were tested in vehicles and stressed with comparable workloads. The experiment was conducted over two years (two stages of research). The collected results were presented using graphs and compared using statistical tests, split into two stages of research, with four seasonal temperature groups. The study provides a detailed description of fuel consumption differences taking into account variations in ambient temperature. The analyses were focused on finding answers to two research questions: does the type of engine oil affect the variation in combustion levels, and what is the variability of fuel consumption in different seasons due to the ambient temperature variability? Briefly, in both stages of the study, vehicles using Revline oil attained the highest average fuel consumption throughout the study period. Vehicles using Total oil showed similar results to those using Revline oil, with the difference in fuel consumption not as noticeable during warmer months. Conversely, vehicles using Orlen oil demonstrated the lowest fuel consumption values during colder months, but higher levels during warmer months.

Nocturnal heat exposure and stroke risk.

In recent decades, nighttime temperatures have increased faster than daytime temperatures. The increasing prevalence of nocturnal heat exposure may pose a significant risk to cardiovascular health. This study investigated the association between nighttime heat exposure and stroke risk in the region of Augsburg, Germany, and examined its temporal variations over 15 years. Hourly meteorological parameters, including mean temperature, relative humidity, and barometric pressure, were acquired from a local meteorological station. A data set was obtained consisting of 11 037 clinical stroke cases diagnosed during warmer months (May to October) between the years 2006 and 2020. The average age of cases was 71.3 years. Among these cases, 642 were identified as haemorrhagic strokes, 7430 were classified as ischaemic strokes, and 2947 were transient ischaemic attacks. A time-stratified case-crossover analysis with a distributed lag non-linear model was used to estimate the stroke risk associated with extreme nighttime heat, as measured by the hot night excess (HNE) index after controlling for the potential confounding effects of daily maximum temperature and other climatic variables. Subgroup analyses by age group, sex, stroke subtype, and stroke severity were performed to identify variations in susceptibility to nighttime heat. Results suggested a significant increase in stroke risk on days with extreme nighttime heat (97.5% percentile of HNE) (odds ratio 1.07, 95% confidence interval 1.01-1.15) during the full study period. When comparing the results for 2013-20 with the results for 2006-12, there was a significant increase (P < .05) in HNE-related risk for all strokes and specifically for ischaemic strokes during the more recent period. Furthermore, older individuals, females, and patients with mild stroke symptoms exhibited a significantly increased vulnerability to nighttime heat. This study found nocturnal heat exposure to be related to elevated stroke risk after controlling for maximum daytime temperature, with increasing susceptibility between 2006 and 2020. These results underscore the importance of considering nocturnal heat as a critical trigger of stroke events in a warming climate.

Power Augmentation of Gas Turbine Using Exhaust Flue Gas Operated Vapor Absorption Machine

Industrial gas turbines (GT) that operate at constant speed are constant-volume-flow combustion machines. As the specific volume of air is directly proportional to the temperature, an increase in air density results in a higher air mass flow rate at low air ambient temperatures. This results more mass of air is now passes through same volume gas turbine space. Consequently, the gas turbine power output increases proportionally with the increase in air mass flow rate. For geographic regions where warm and humid months are predominant throughout the year, significant power loss occurs during these months, and a higher rate of expensive fuel is fired at reduced power output. A gas turbine inlet air cooling technique is a useful option to enhance GT output. One of the innovative options for power augmentation of gas turbine is inlet air conditioning using a vapor absorption machine (VAM). Using VAM for GT intake air conditioning has the advantage over other systems in that it can be operated from waste heat. Many gas turbine machines, particularly natural gas pumping stations, are operated without heat recovery steam generator (HRSG) or heat recovery option. Valuable heat energy is escaped with exhaust flue gas in these systems. This paper demonstrates how GT exhaust waste heat can be utilized for its own power generation enhancement. In this study, a flue gas-based vapor absorption machine is selected for cooling the inlet air of a 26 MW gas turbine, which is used to drive the booster compressor of a natural gas pumping station. The capacity of the VAM for the required cooling effect has been calculated. The expected GT power enhancement from intake air gas conditioning has also been estimated in this paper.

Geospatial forest fire risk assessment and zoning by integrating MaxEnt in Gorkha District, Nepal

Forest fires are an imminent danger to natural forest ecosystems, and carrying out zoning studies and forest fire risk assessments are of great practical significance in steering fire prevention, minimizing fire incidents, and limiting the environmental consequences of fire. Using the Gorkha district of Nepal as a case study, this study used remotely sensed high-temperature fire data as the forest fire sample. Nine parameters related to topography, climatic conditions, vegetation, and human intervention were used as environmental variables affecting fire occurrence. Next, a MaxEnt forest fire risk assessment model was generated with GIS and R, which analysed the contribution, significance, and responses of environmental variables to the forest fire in Gorkha District. The findings demonstrate that (1) following a test of sample locations for forest fires, the MaxEnt model has excellent relevance and practicality when applied to fire risk assessment; (2) Out of 2747 fire points in the forest, only 110 Spatio-temporally independent fire points were used for the model building having high and normal confidence level. Regarding Area Under Curve (AUC) values, the training data yielded results of 0.875, while the test data produced acceptable results of 0.861 with a standard deviation of 0.0322; (3) the importance of climatic and Land Use Land Cover (LULC) variables to forest fire are 56.2 % and 32.9 %, respectively, and their contribution to forest fire are 32 % and 47.6 %, respectively. (4) There are numerous and intricate ways that environmental factors influence forest fires. The forest fire response curves to the nine chosen environmental variables are complex and nonlinear rather than linear; Maximum temperature of the warmest month (bio_5), Isothermality (bio_3), Precipitation of Driest Quarter (bio_17) and mean Diurnal Range (bio_2) bear a nonlinear positive link with the possibility of forest fires. In contrast, elevation, slope, temperature seasonality (bio_4), distance from the settlement, and LULC have a favorable stimulating response to the possibility of forest fires within an appropriate interval. (5) In Gorkha, there are geographical differences in the risk of forest fires. Only 12.83 % of the whole area is made up of areas at significantly high risk or above, compared to 87.17 % for high-risk and below.

Urban air PCDD/Fs: Atmospheric concentrations, temporal changes, gas/particle partitioning, possible sources and cancer risks

Polychlorinated dibenzo-p-dioxins/furans (PCDD/Fs) are pollutants of concern due to their toxic effects. No active sampling study on PCDD/Fs has been conducted in Bursa. This study aimed to fill this gap by measuring PCDD/F levels in the region. Accordingly, the samples were collected from an urban area in Bursa, covering four seasons between June 2022 and April 2023. The total (gas+particulate) ambient air concentrations were between 312.23 and 829.80 fg/m3 (mean: 555.05 ± 173.62 fg/m3). In terms of toxic equivalents (TEQ), the average concentration was 43.29 ± 9.18 fg WHOTEQ/m3. Based on the concentration values obtained, cancer and non-carcinogenic risk values of PCDD/Fs were calculated for three different age groups. The results indicated negligible health risks for all age groups. In addition, a seasonal assessment was also made and it was observed that PCDD/F concentration values varied with the ambient air temperatures. In general, higher values were measured in colder months compared to warmer months. This was probably due to the additional sources and adverse meteorological conditions. Moreover, the gas/particle partitioning of PCDD/Fs was investigated in detail. The average gas and particulate phase concentrations for PCDD/Fs were 101.81 ± 20.77 and 453.24 ± 172.50, respectively. It was found that an equilibrium state was not reached in the gas/particle partitioning. Two different gas/particle partition models based on adsorption and absorption mechanisms were compared, and the absorption model gave more consistent predictions. The Principal Component Analysis (PCA) was employed to identify the possible PCDD/F sources. The results indicated that the region was influenced by vehicle emissions, residential heating, organized industrial zones and metal recycling facilities. In addition, 72-hour backward air mass trajectory analyses were performed to understand the long-range transported air masses. However, it was found that the transported air masses did not significantly affect the concentration values measured in the sampling site.

Population structure and genetic diversity of false killer whales (Pseudorca crassidens) in New Zealand waters: preliminary results

ABSTRACT False killer whales (Pseudorca crassidens) are globally distributed cetaceans, often found in deep oceanic waters but occasionally near coastlines. Despite their broad distribution, information on their abundance, genetics, and ecology remains limited. In New Zealand waters, these whales occur year-round, with increased sightings during the warmer months due to the East Auckland Current. This study investigates the genetic diversity and population structure of New Zealand false killer whales using 17 samples collected from 2005 to 2018 in four locations, comparing them to global studies. New Zealand samples revealed four unique haplotypes with low genetic diversity (h = 0.42 ± 0.141; π = 0.29%± 0.002). No genetic differentiation was observed between South Pacific and New Zealand populations (FST = 0.05 p = 0.1602 Φ ST = 0.058 p = 0.145). These findings suggest low genetic diversity for New Zealand false killer whales, but within values expected for other cetaceans with matrilineal social structures. The presence of shared haplotypes suggests potential historical or ongoing connections with wider Pacific populations. However, further research is needed due to the short mtDNA-CR fragment analysed and small sample size, which may have resulted in an inability to capture the full extent of the genetic variation. This study contributes to our understanding of this species and its conservation within New Zealand.

Stratospheric influence on surface ozone pollution in China

Events of stratospheric intrusions to the surface (SITS) can lead to severe ozone (O3) pollution. Still, to what extent SITS events impact surface O3 on a national scale over years remains a long-lasting question, mainly due to difficulty of resolving three key SITS metrics: frequency, duration and intensity. Here, we identify 27,616 SITS events over China during 2015-2022 based on spatiotemporally dense surface measurements of O3 and carbon monoxide, two effective indicators of SITS. An overview of the three metrics is presented, illustrating large influences of SITS on surface O3 in China. We find that SITS events occur preferentially in high-elevation regions, while those in plain regions are more intense. SITS enhances surface O3 by 20 ppbv on average, contributing to 30-45% of O3 during SITS periods. Nationally, SITS-induced O3 peaks in spring and autumn, while over 70% of SITS events during the warm months exacerbate O3 pollution. Over 2015-2022, SITS-induced O3 shows a declining trend. Our observation-based results can have implications for O3 mitigation policies in short and long terms.