Rayleigh Dissipation Function Research Articles

Theoretical and Numerical Modeling of Optical Switching of Epitaxial Nanostructures Based on Iron-Garnet Films

The paper presents a theoretical analysis of magnetization switching in a gadolinium ferrite garnet film due to the demagnetizing effect of a femtosecond laser pulse. Using the Lagrange formalism for a two-sublattice ferrimagnet, the effective Lagrangian, thermodynamic potential, and Rayleigh dissipative function are obtained. The phase diagram of the ferrite film is analyzed, and the main states of the system are identified. Magnetization switching diagrams and trajectories of the order parameter dynamics of the magnet are constructed. The ranges of magnetic fields, temperatures, and demagnetization values for the most efficient magnetization switching are analyzed.

Geometrical description and Faddeev-Jackiw quantization of electrical networks

In lumped-element electrical circuit theory, the problem of solving Maxwell's equations in the presence of media is reduced to two sets of equations, the constitutive equations encapsulating local geometry and dynamics of a confined energy density, and the Kirchhoff equations enforcing conservation of charge and energy in a larger, topological, scale. We develop a new geometric and systematic description of the dynamics of general lumped-element electrical circuits as first order differential equations, derivable from a Lagrangian and a Rayleigh dissipation function. Through the Faddeev-Jackiw method we identify and classify the singularities that arise in the search for Hamiltonian descriptions of general networks. The core of our solution relies on the correct identification of the reduced manifold in which the circuit state is expressible, e.g., a mix of flux and charge degrees of freedom, including the presence of compact ones. We apply our fully programmable method to obtain (canonically quantizable) Hamiltonian descriptions of nonlinear and nonreciprocal circuits which would be cumbersome/singular if pure node-flux or loop-charge variables were used as a starting configuration space. We also propose a specific assignment of topology for the branch variables of energetic elements, that when used as input to the procedure gives results consistent with classical descriptions as well as with spectra of more involved quantum circuits. This work unifies diverse existent geometrical pictures of electrical network theory, and will prove useful, for instance, to automatize the computation of exact Hamiltonian descriptions of superconducting quantum chips.

Dynamic modeling and analysis of viscoelastic hard-magnetic soft actuators with thermal effects

Hard-magnetic soft materials (HMSMs) are a class of magnetoactive smart polymers capable of sustaining a high residual magnetic flux density and can undergo large actuation strains under an external magnetic excitation. Due to these exceptional characteristics, soft actuators based on HMSMs hold enormous potential for remote-controlled applications. The temperature and viscoelasticity considerably influence the performance of these materials during the operation. This work aims to develop an analytical framework for modeling the dynamic behavior of a planar hard-magnetic soft actuators (HMSA) considering temperature and viscoelastic effects. The constitutive behavior of the viscoelastic HMSA is described by employing an incompressible neo-Hookean model in conjunction with a Zener rheological model and the Rayleigh dissipation function. The dynamic governing differential equations of motion are derived by utilizing the non-conservative form of the Euler–Lagrange equation. This study delves into the collective influence of temperature and viscoelastic properties on the stability, periodicity, and resonance characteristics of nonlinear vibrations exhibited by HMSM-based planar actuator subjected to dynamic magnetic loading, presenting the findings through time-history responses, Poincaré maps, and phase-plane plots. The presented results can help in the efficient and robust design of HMSM-based actuators and can also serve as an initial step toward the development of advanced actuators exposed to dynamic loading under variable temperatures for diverse applications in the fields of engineering and medicine.

A variational formulation for three-dimensional linear thermoelasticity with ‘thermal inertia’

AbstractA variational model has been developed to investigate the coupled thermo-mechanical response of a three-dimensional continuum. The linear Partial Differential Equations (PDEs) of this problem are already well-known in the literature. However, in this paper, we avoid the use of the second principle of thermodynamics, basing the formulation only on a proper definition (i) of kinematic descriptors (the displacement and the entropic displacement), (ii) of the action functional (with kinetic, internal and external energy functions) and (iii) of the Rayleigh dissipation function. Thus, a Hamilton–Rayleigh variational principle is formulated, and the cited PDEs have been derived with a set of proper Boundary Conditions (BCs). Besides, the Lagrangian variational perspective has been expanded to analyze linear irreversible processes by generalizing Biot’s formulation, namely, including thermal inertia in the kinetic energy definition. Specifically, this implies Cattaneo’s law for heat conduction, and the well-known Lord–Shulman model for thermo-elastic anisotropic bodies is then deduced. The developed variational framework is ideal for the perspective of analyzing the thermo-mechanical problems with micromorphic and/or higher-order gradient continuum models, where the deduction of a coherent system of PDEs and BCs is, on the one hand, not straightforward and, on the other hand, natural within the presented variational deduction.

Finger flow modeling in snow porous media based on lagrangian mechanics

Practical formulation for finger flow is lacking even though such a non-Darcy flow is commonly observed in homogeneous snow porous media. This study generalized physics for porous media flow based on the Lagrangian Mechanics; for instance, Darcy formula was theoretically derived minimizing the energy loss by solving the Euler-Lagrange Equation with Rayleigh dissipation function. This least energy loss (LEL) principle was then used to elucidate the finger flow formation in homogenous media. It was found that the inactive saturation (non-contributing void fraction) plays an important role in finger flow formation. This new theory also linked Darcy-Richards capillary flow and Newtonian viscous flow theories. Predicted flow area fractions by the LEL model were verified by the cold room laboratory experiment using well-controlled, homogeneous snow sample, as performed and documented by Katsushima et al. (2013).

Nonlinear Vibration and Dynamic Buckling of Complex Curved Functionally Graded Graphene Panels Reinforced with Inclined Stiffeners

This paper presents a new semi-analytical approach for the nonlinear vibration and dynamic responses of functionally graded graphene platelet-reinforced composite (FG-GPLRC) panels with complex curvature reinforced by orthogonal and/or inclined stiffeners in the thermal environment resting on the nonlinear viscoelastic foundation with the nonlinearities of von Kármán in the framework of the higher-order shear deformation theory (HSDT). The three curvature types of complexly curved panels are considered to be cylindrical, sinusoid, and parabola panels. Orthogonal and/or inclined stiffeners are modeled utilizing an improved smeared stiffener technique. The stress function form is estimated by applying the like-Galerkin method for complexly curved panels. By applying the Lagrange function and Euler–Lagrange equation, the nonlinear equations of motion of the panels are obtained. The viscous damping effects of the viscoelastic foundation are considered by utilizing the Rayleigh dissipation function. Numerical results are examined utilizing the Runge–Kutta method to acquire the time-deflection curves, and by utilizing the Budiansky–Roth criterion, the critical dynamic buckling loads are determined. From the investigated results, it is possible to evaluate the nonlinear vibration and buckling dynamic responses of three forms of panels with stiffeners.

Nonlinear vibration and dynamic buckling responses of stiffened functionally graded graphene‐reinforced cylindrical, parabolic, and sinusoid panels using the higher‐order shear deformation theory

AbstractThe nonlinear vibration and dynamic responses of functionally graded graphene‐reinforced composite (FG‐GRC) laminated cylindrical, parabolic, and sinusoid panels stiffened by FG‐GRC stiffeners in the uniformly distributed temperature variation are presented in this paper. An improved smeared stiffener technique is used to model the added stiffnesses of stiffeners to the total stiffnesses of panels. The higher‐order shear deformation shell theory (HSDT) with the geometrical nonlinearities of von Kármán is applied to establish the governing formulations. The stress function form is estimated using the approximated technique for complex curvature panels. Lagrange function and Euler‐Lagrange equations are applied, and the Rayleigh dissipation function is taken into account to obtain the nonlinear equation of motion. Numerical examples are investigated using the Runge‐Kutta method to obtain the dynamic responses of panels, and the critical dynamic buckling loads of panels are considered using the Budiansky‐Roth criterion. Some significant remarks on the nonlinear vibration and dynamic buckling responses of three types of stiffened panels can be recognized from the numerical examples.

Dual Quaternions Representation of Lagrange's Dynamic Equations

Abstract This paper introduces for the first time, the Lagrange's dynamic equations in dual number quaternion form. Additionally, Rayleigh's dissipation function in dual quaternion form is introduced here allowing for the accounting of dissipative (non-conservative) forces such as motion through a viscous fluid, friction, and spring damping force. As an example, dual quaternions are used here to derive the Lagrange dynamic equations of a robot manipulator.

Novel Aspects of Cilia-Driven Flow of Viscoelastic Fluid through a Non-Darcy Medium under the Influence of an Induced Magnetic Field and Heat Transfer

The spontaneous movement of natural motile cilia in the form of metachronal waves is responsible for fluid transport. These cilia, in particular, play important roles in locomotion, feeding, liquid pumping, and cell delivery. On the other hand, artificial cilia can be useful in lab-on-a-chip devices for manipulation processes. In this study, a novel model for the ciliated tapered channel in Sutterby fluid flow under the impact of an induced magnetic field and heat transport is proposed. The Darcy–Brinkman–Forchheimer law for porous media with a viscous dissipation function is considered. With the help of lubrication theory, the simplified non-linear form of the leading equation with cilia-oriented boundary conditions is achieved. The analytical results of differential equations are based on the topological perturbation approach. The numerical simulation is performed to elaborate on the physical interpretations of emerging parameters through computer software.

Viscoelastic Effects on the Nonlinear Oscillations of Hard-Magnetic Soft Actuators

AbstractThe hard-magnetic soft materials (HMSMs) belong to the magnetoactive category of smart polymers that undergo large actuation strain under an externally applied magnetic field and can sustain a high residual magnetic flux density. Because of these remarkable characteristics, HMSMs are promising candidates for the remotely controlled actuators. The magnetic actuation behavior of the hard-magnetic soft actuators (HMSAs) is considerably affected by the viscoelastic material behavior of HMSMs. In this article, we aim at developing an analytical dynamic model of a typical planar model of HMSAs concerning the viscoelasticity of HMSMs. A Zener rheological model in conjunction with an incompressible neo-Hookean model of hyperelasticity and Rayleigh dissipation function is employed for defining the constitutive behavior of the viscoelastic HMSA. The governing equations of dynamic motion are deduced by implementing the nonconservative form of the Euler–Lagrange equation. The established dynamic model is utilized for providing preliminary insights pertaining to the effect of the viscoelasticity on the nonlinear oscillations of the actuator. The phase–plane portraits, Poincaré maps, and the time–history response are plotted to investigate the stability, resonant behavior, and periodicity of the actuator. The results and inferences reported here should provide the initial step toward the design and the development of modern actuators for diverse futuristic applications in the medical and engineering fields.

Vortex Dynamics in a Hybrid Aligned Nematic Microvolume with an Orientational Defect

The aim of this theoretical paper is to investigate the physical mechanism responsible for the appearance of vortex flow in a hybrid aligned nematic (HAN) microvolume with an orientational defect, excited by a temperature gradient ∇T. This was done in the framework of the classical Ericksen-Leslie theory, supplemented by thermomechanical correction of the shear stress and Rayleigh dissipation function, as well as taking into account the entropy balance equation. We have carried out a numerical study of the system of hydrodynamic equations including director reorientation, fluid flow v, and the temperature redistribution across the HAN microvolume under the influence of ∇T, when the HAN microvolume is heated from above. Calculations show that, due to the interaction between the gradient of the director field ∇n^ and ∇T, the HAN microvolume settles down to a stationary complex vortex flow regime.

Energy Consumption Analysis of a Rolling Mechanism Based on a Five-Bow-Shaped-Bar Linkage

To reveal the relationship between the center of mass (CoM) trajectory of a closed five-bow-shaped-bar linkage and its energy consumption, this paper presents a trajectory planning method based on the workspace of the CoM. Using different height points located on the symmetric centerline of the workspace of the CoM as via points, the CoM trajectory is planned by combining cubic polynomials with Bézier curves based on quadratic Bernstein polynomials. Herein, the system energy consumption is obtained by integrating the product of generalized velocity and generalized force versus time, where the generalized force is calculated by Lagrange’s equation including the Rayleigh dissipation function. Then, two schemes of dynamic rolling are proposed to compare, and the theoretical results show that the system consumes less energy under the sinusoid scheme when the via point height is lower and the via point of higher height is more suitable under the modified trapezoidal curve scheme. Furthermore, this paper combines the locomotion simulation software to design the locomotion of the mechanism’s CoM trajectory under two schemes in detail and verifies the correctness of the theoretical results.

Magnetic Nanoparticles for Drug Delivery through Tapered Stenosed Artery with Blood Based Non-Newtonian Fluid

Nanoparticles play an essential role in biomedical applications. A most promising area in nanomedicine is drug targeting which is done with the aid of magnetized nanoparticles. In this study, the hemodynamics of hybrid nanofluid flow with gold and copper nanoparticles suspended in it is investigated. This research primarily focuses on magnetic drug delivery which is propagated through a tapered stenosed artery under three situations, including converging, diverging, and non-tapering arteries. To explore the rheological characteristics of blood, a Sutterby fluid, which is a non-Newtonian fluid, is postulated. The energy equation also incorporates the effects of the magnetic field and joule heating, as well as the viscous dissipation function. Lubrication theory provides a mathematical framework for model formulation. The hypothesized modeling is simplified to a set of nonlinear differential equations that are then solved using a perturbation method up to the second order of approximation. Graphs are used to describe the outcomes of different evolving parameters. The Sutterby fluid parameter opposes the flow negligibly, whereas the Hartmann number and thermal Grashof number strengthen the flow field. Copper nanoparticles (in the absence of gold nanoparticles) are observed to deplete the thermal profile substantially more than gold nanoparticles. Nevertheless, the thermal profile is enhanced by the presence of both nanoparticles (hybrid nanofluids). For greater values of the Sutterby fluid parameter, the wall shear stress has been observed to rise considerably, whereas the inverse is true for the Hartmann number and the thermal Grashof number. The present results have been improved to give significant information for biomedical scientists who are striving to study blood flow in stenosis situations, as well as for those who will find the knowledge valuable in the treatment of different diseases.

A continuum model based on Rayleigh dissipation functions to describe a Coulomb-type constitutive law for internal friction in woven fabrics

A continuum model intended to provide predictions for the response of a woven fabric that includes the effects of friction between fibers is proposed. Specifically, we consider a macroscopic formulation in which the fabric weave is composed of two orthogonal families of continuously distributed yarns. The elastic behavior of the planar fabric is characterized by a second-gradient formulation, incorporating the capacity of the fibers to resist a bending deformation. Particular care is devoted to modeling the action of preventing fiber overlapping through a potential energy barrier. The frictional sliding effect of warp threads interwoven with the weft yarns is introduced through a Rayleigh dissipative function that can be appropriately shaped to consider a Coulomb-type law. Spinning friction of yarns belonging to different families also is conceived when a relative rotation between fibers is present to generalize the dissipation phenomenon involved in the considered sheet. Numerical simulations of the proposed model are provided and discussed.

Thermal efficiency in hybrid (Al2O3-CuO/H2O) and tri-hybrid (Al2O3-CuO-Cu/H2O) nanofluids between converging/diverging channel with viscous dissipation function: Numerical analysis.

Heat transfer and energy storage remain a core problem for industrialists and engineers. So, the concept of new heat transfer fluids, namely, nanofluids and hybrid nanofluids, has been introduced so far. Recently, a new third generation of heat transfer fluids has been developed known as modified hybrid nanofluids (MHNs), synthesized by ternary nanomaterials and the host fluid. Therefore, the study was conducted to investigate the energy storage efficiency between (Al2O3-CuO-Cu/H2O)mhnf and (Al2O3-CuO/H2O)hnf in the presence of novel viscous dissipation effects. The problem is developed for a channel with stretchable walls via thermophysical attributes of binary and ternary guest nanomaterials and the host liquid. The model is tackled numerically and furnished results for the dynamics, most specifically energy storage efficiency in (Al2O3-CuO-Cu/H2O)mhnf. It is examined that the third generation of heat transfer fluids (Al2O3-CuO-Cu/H2O)mhnf has high thermal energy storage efficiency than traditional nano and hybrid nanofluids. Therefore, these new insights in heat transfer would be beneficial and cope with the problems of energy storage in the modern technological world.

High-Precision Angular Speed Tracking Control of Gimbal System With Harmonic Reducer

In this article, a composite controller based on an extended state observer (ESO) and sliding-mode control (SMC) is presented in order to deal with the angular speed fluctuation caused by the kinematic error of a harmonic reducer in the gimbal system of a control moment gyro. First, based on the analysis of the kinematic error derived from the relationship between the angular speed of the motor and that of the load, a second-order gimbal system model is established based on the Lagrange function and the Rayleigh dissipation function. Second, a three-order linear ESO is designed to observe the uncertain disturbances of the gimbal system, and the disturbances are rejected via the proposed composite controller combining the ESO with SMC. Third, we prove the overall system stability by using the Lyapunov approach and the final value theorem. Finally, both simulation and experimental results verify the effectiveness of the proposed method in attenuating gimbal system disturbances.

Modelling the rate-dependency of the mechanical behaviour of the aortic heart valve: An experimentally guided theoretical framework

A theoretical framework, based on extant experimental findings, is presented to devise a novel viscous dissipation function Wv in order to model the rate-dependent mechanical behaviour of the aortic heart valve. The experimental data encompasses Cauchy stress-stretch (σ−λ) curves obtained across a 10,000-fold range of stretch rates (λ˙), from quasi-static (λ˙= 0.001 s−1) to upper-range of physiological (λ˙= 12.4 s−1) deformation rates. The analysis of the data elicits two important trends: (i) the mechanical behaviour of the aortic valve across the tested rates is rate-dependent, with specimens becoming stiffer by increasing rate; and (ii) there appears to be a plateau in the rate-effects on the σ−λ curves; i.e. the rate-effects approach an asymptote with increase in the stretch rate λ˙. Guided by these empirical observations, we devise our new Wv function and demonstrate that the well-known form of the dissipation function commonly used in the literature is a special case of our proposed Wv. The ensuing model is then compared against the experimental σ−λ curves and is shown to provide favourable predictions. An important advantage of the employed modelling framework is that it allows the incorporation of the rate of deformation, which is a direct experimental control parameter, as an explicit modelling variable. The application of the proposed model is thereby recommended for heart valves and other soft tissues that exhibit similar rate-dependent features.

Insight into the investigation of diamond (C) and Silica (SiO2) nanoparticles suspended in water-based hybrid nanofluid with application in solar collector

Solar energy conversion systems have encountered numerous issues in recent years due to their poor thermal and optical performance. The fundamental reason for this is that the optical coating of the solar collector is inefficient, and the heat transfer fluid has poor thermal conductivity. As a result, improving the optical thermal performance of energy conversion systems is essential. Therefore in the present article, we discuss in detail about the behavior of diamond (C) and Silica (SiO2) nanoparticles suspended in the water-based hybrid nanofluid floating over an exponentially elastic surface. We have considered the permeable medium to analyze the flow characteristics. Water is incompressible and electrically conductive under the influence of an externally imposed magnetic field. In addition, the viscous dissipation function is taken into account in the energy equation. To carry out the mathematical formulation, an appropriate similarity transformation is used, and the governing equations are transmogrified into nonlinear differential equations. These nonlinear differential equations have been numerically solved using the Successive Linearization method, and the graphical results were presented in relation to the velocity profile, skin friction coefficient, temperature profile, and Nusselt number. A numerical comparison with previously reported results is addressed to analyze the validity of the results and convergence of the proposed methodology. In addition, a comparison is presented between current findings acquired by using the Successive Linearization method and those acquired by using the bvp4c (Matlab built-in command).

Dynamic analysis of flexible-link manipulator in underwater applications using Gibbs-Appell formulations

The dynamic model of a flexible robotic chain by considering its motion in a fluid medium is developed in this study. The use of flexible manipulators in fluid applications offers several advantages, but the fluid-manipulator interaction forces, as well as the elasticity of each link, complicates the modeling process. To tackle this issue, the dynamic effects of the fluid on the performance of flexible arms are identified and expressed mathematically so that the resulting interaction during the robot motion can be modeled simultaneously. In this regard, the dynamic interaction between the links and the fluid as a result of link flexibility is modeled as a distributed load along the arm length. In addition to the structural damping of the links, the effect of fluid damping along with its added mass affects the performance of the considered robotic system. Thus, compared to a flexible robotic arm in the air or a rigid robotic arm in the fluid, the flexible deformation of the robot links during motion is affected by the fluid flow. The recursive Gibbs-Apple formulation is used to derive the equations of motion of an N-link robotic chain. Not only does this formulation reduce the computational complexity compared to similar algorithms, but it also allows us to consider the effect of forces exerted on the joints and robot links in the form of the Rayleigh dissipation function. The final equations of motion are simulated using MATLAB for a two-link flexible arm. Simulations of robot links are conducted for different elasticities, different initial conditions, and different media with different viscosities. According to the obtained results, the deformation of flexible manipulators decreases from 5 mm (in the air) to 3 mm (in the fluid), while the displacement in water is 10% of that in the air under similar conditions.

Nanofluidics of nematic liquid crystals in hollow capillaries.

The aim of this paper is to investigate the response of a homogeneously aligned nematic nanosized hollow cavity (HANNHC) confined between two charged horizontal coaxial cylinders and subjected to both a radially applied electrostatic field E, arising from the surface charge density κ and the temperature gradient ∇T set between these cylinders. This was done within the framework of an extension of the classical Ericksen-Leslie theory, supplemented by thermomechanical correction of the shear stress and Rayleigh dissipation function, as well as taking into account the entropy balance equation. The physical mechanism responsible for the excitation of the hydrodynamic flow in the HANNHC is based on the interaction of the director and temperature gradients and the static electric field. Calculations show that under the influence of both the ∇T and E, a stationary flow u^{st} is excited in the HANNHC in the horizontal direction. It is shown that the electric force enforced by the flexoelectric polarization plays a crucial role in the excitation of u^{st} between these cylinders.