Vertical Patterns Research Articles

Vertical Distribution Characteristics and Driving Factors of Bacterioplankton and Nitrogen Phosphorus Cycle Genes in Danjiangkou Reservoir

Danjiangkou Reservoir is a critical water source for the South-to-North Water Diversion Project, which harbors a diverse bacterioplankton community with varying depths, and the understanding of its nitrogen and phosphorus cycle and associated driving factors remains limited. In this study, we selected five ecological sites within Danjiangkou Reservoir and conducted metagenomics analysis to investigate the vertical distribution of bacterioplankton communities in the surface, middle, and bottom layers. Furthermore, we analyzed and predicted the function of nitrogen and phosphorus cycles, along with their driving factors. Our findings revealed the dominance of Proteobacteria, Actinobacteria, and Planctomycetes in the Danjiangkou Reservoir. Significant differences were observed in the structure of bacterioplankton communities across different depths, with temperature （T）, oxidation-reduction potential （ORP）, dissolved oxygen （DO）, and Chla identified as primary factors influencing the bacterioplankton composition. Analysis of nitrogen cycle functional genes identified 39 genes, including gltB, glnA, gltD, gdhA, NRT, etc., which were involved in seven main pathways, encompassing nitrogen fixation, nitrification, denitrification, and dissimilatory nitrate reduction. Phosphorus cycle function gene analysis identified 54 genes, including pstS, ppx-gppA, glpQ, ppk1, etc., primarily participating in six main pathways, including organic P mineralization, inorganic P solubilization, and regulatory. Cluster analysis indicated that different depths were significant factors influencing the composition and abundance of nitrogen and phosphorus cycle functional genes. The composition and abundance of nitrogen and phosphorus cycle functional genes in the surface and bottom layers differed and were generally higher than those in the middle layer. Deinococcus, Hydrogenophaga, Limnohabitans, Clavibacter, and others were identified as key species involved in the nitrogen and phosphorus cycle. Additionally, we found significant correlations between nitrogen and phosphorus cycle functional genes and environmental factors such as DO, pH, T, total dissolved solids （TDS）, electrical conductivity （EC）, and Chla. Furthermore, the content of these environmental factors exhibited depth-related changes in the Danjiangkou Reservoir, resulting in a distinct vertical distribution pattern of bacterioplankton nitrogen and phosphorus cycle functional genes. Overall, this study sheds light on the composition, function, and influencing factors of bacterioplankton communities across different layers of Danjiangkou Reservoir, offering valuable insights for the ecological function and diversity protection of bacterioplankton in this crucial reservoir ecosystem.

Investigating the influences of the geometry and orientation of corrugation in the steel shear walls on the cyclic behavior through the use of finite element analysis

To dampen the loading sequences in the constructions, using the shear walls is recommended. Shear walls, which withstand the lateral forces (i.e., parallel to the plane of the wall) of wind and seismic activity, prevent buildings from collapsing while columns and load-bearing walls support the structure’s compression load all the way to the foundation. Besides, some new techniques are innovated for strengthening the structure like outrigger system. The steel shear walls are mostly used in the steel structures due to their high strength, ductility, and low weight. Recently, implementing Corrugated Steel Shear Walls (CSSWs) has gained more attention because they can absorb much amount of energy compared to flat steel shear walls. There are two important parameters in the CSSWs that play crucial roles in controlling their strength; corrugation geometry and orientation. Therefore, the current research paper aims to study numerically the effects of four corrugation geometries (trapezoidal, square, zigzag, and curved) with two orientations on the cyclic behavior of the CSSWs. Finite Element Analysis (FEA) is used to simulate the seismic loading conditions and finally, this procedure is validated through the comparison of the modeled flat shear wall with the experimentally published results. The difference between the peak loads of hysteresis curves obtained numerically and experimentally is about 8.5%. The stated FEA procedure in this paper can be regenerated by other researchers. The results confirmed the applicability of the CSSWs compared to the flat shear walls. Also, the vertical corrugation infill patterns result in higher strength in comparison to the horizontal ones. For instance, in the zigzag and square corrugation shapes, the plastic energy dissipation of the vertically oriented specimens (13.84 and 14.01 KJ, respectively) is higher around 7% and 29%, respectively than the horizontally oriented ones (12.9 and 10.84 KJ, respectively). Besides, the trapezoidal and curved corrugation geometries show the highest cumulated energy and plastic energy dissipation.

Evaluation of Buccolingual Inclinations of First Molars Among Different Vertical Facial Patterns in Class II Division I Subjects.

Background Knowing the characteristics of vertical patterns is crucial to provide the best orthodontic treatment. Cone beam computed tomography (CBCT) offers a valuable tool for evaluating true buccolingual inclinations. The current study investigates the buccolingual inclination of first molars in adult subjects with different vertical facial patterns. Methods CBCT scans of 66 adult patients (31 males, 35 females) with a mean age of 31.6 years (SD: 6.4 years) exhibiting skeletal class II division I maxillomandibular relationships were employed. Participants were categorized into three groups based on linear and angular measurements: normodivergent group (n=22), hypodivergent group (n=22), and hyperdivergent group (n=22). The independent samples t-test and Mann-Whitney U-test were conducted to investigate statistical differences in terms of buccolingual inclination between the three vertical patterns. Results Statistically significant differences were observed in the buccolingual inclinations of both maxillary and mandibular first molars in the hypodivergent group compared to the other groups (p<0.05). Conclusions In patients with class II division I sagittal relationships, the buccolingual inclinations of the first molars exhibit similarities between normodivergent and hyperdivergent groups. However, these inclinations differ significantly in hypodivergent adult subjects.

Assessment of hard and soft tissue thickness at mandibular symphysis in skeletal Class III patients with different vertical patterns.

This study aimed to assess the bony and soft tissue parameters at mandibular symphysis among skeletal Class III patients with different vertical growth patterns, using cone-beam computed tomography (CBCT). CBCT images of 60 skeletal Class III non-growing patients were evaluated (mean age 24.9 ± 8.4 years). Study samples were classified into three facial types based on the mandibular plane angle (SN-MP angle): low, normal, and high angle. The bony and soft tissue parameters at the mandibular symphysis were evaluated. Among hard tissue variables, symphysis and pogonion width were significantly narrower in the high-angle group (P < .05). The thickness of the buccal cortex at pogonion was also significantly thinner in subjects with high angles (P < .01). Symphysis height showed an increasing tendency from the low-angle to the high-angle group. However, no significant differences were found in chin width and height according to vertical patterns. Across all soft tissue measurements, the low-angle group exhibited the highest thickness, which gradually decreased in the high-angle group. Statistically significant differences in soft tissue thickness were observed at Menton (Me) and Gnathion (Gn) (P < .05). A significant negative correlation was observed between the SN-MP angle and the thickness of both hard and soft tissues. In skeletal Class III subjects, significant differences existed in both hard and soft tissues at the mandibular symphysis, depending on the vertical patterns. These results provide a comprehensive evaluation of symphyseal area, which can aid clinicians in identifying appropriate treatment approaches, especially for combined orthognathic and orthodontic treatment.

Comparison of Collum Angle in Different Skeletal Growth Pattern using Cephalometric Radiographs among Orthodontic Patients in Tertiary Dental Care Center of Kathmandu

Collum angle has been previously studied in different types of sagittal malocclusion but very few studies have focused on vertical malocclusion in our population. Since collum angle is responsible for variation in torque expression, root resorption, fenestration and dehiscence, with prior knowledge of collum angle in high angle and low angle cases, operator can prevent above deleterious effects and accompanied better bracket positioning in future orthodontic treatment. Lateral cephalograms of all the patients of age group 13-30 years attending Department of Orthodontics in Nepal Medical College from October 2023 to March 2024, having clinically harmonious and symmetrical face, full complement of dentition except third molar, minimum crowding were taken. Based on the value of SNMP (Sella-Nasion and Mandipular plane), and Jarabak ratio, the samples were divided into high angle and low angle. Collum angle was drawn and measured in terms of degrees. The data were transferred to SPSS-17 for further analysis. A total of 60 study participants were included in the study with an equal number of male and females. (30 each with age ranging from 13 to 30 years with mean age 19.18±3.89 years) There was an equal distribution of study participants in horizontal and vertical growth patterns (30 each). There was no statistically significant difference in mean collum angle between study participants in horizontal and vertical growth patterns (p = 0.09). No statistically significant difference in mean collum angle between study participants in horizontal and vertical growth patterns in relation to gender was found (Male p = 0.08 and female - p-value 0.55).

Use of Orthodontic Mini-Implants in Conjunction with Elastics for Extrusion of Impacted Canines and Correction of Bimaxillary Protrusion.

Orthodontic extrusion of canines, although challenging, can yield excellent results without tooth extraction. Temporary anchorage devices (TADs), involving mini-implants in the alveolar bone, offer stable anchorage via biomechanics. This case report details orthodontic extrusion of bilaterally impacted maxillary canines using TAD mini-implants and elastics. The patient had bimaxillary protrusion, moderate crowding, deep bite, and vertical growth pattern, necessitating careful treatment planning. The combination of TAD mini-implants with Class-II elastics simplified biomechanics. The treatment achieved efficient results, maintained adjacent teeth positioning, and improved patient compliance.

The joint effects of local, climatic, and spatial variables determine soil oribatid mite community assembly along a temperate forest elevational gradient.

Numerous factors influence mountain biodiversity variation across elevational gradients and recognizing the relative importance is vital for understanding species distribution mechanisms. We examined oribatid mites at nine elevations (from 600 to 2200 m a.s.l) and four vegetation types from mixed coniferous and broad-leaved forests to alpine tundra on Changbai Mountain. We assessed the contribution of environmental factors (climatic and local factors) and spatial processes (geographic or elevation distances) to oribatid mite community assembly and identified 59 oribatid mite species from 38 families and 51 genera. With increasing elevation, species richness and the Shannon index declined significantly, whereas abundance followed a hump-shaped trend. Soil TP, NH4 +-N, MAT, MAP, and elevation were the critical variables shaping oribatid mite communities based on random forest analysis. Moreover, environmental and spatial factors, and oribatid mite communities were significantly correlated based on Mantel and partial Mantel tests. Local characteristics (3.9%), climatic factors (1.9%), and spatial filtering (8.8%) played crucial roles in determining oribatid mite communities across nine elevational bands (based on variation partitioning analyses of abundance data). Within the same vegetation types, spatial processes had relatively little effects, with local characteristics the dominant drivers of oribatid mite community variation. Environmental and spatial filters together shape oribatid mite community assembly and their relative roles varied with elevation and vegetation type. These findings are crucial for the conservation, restoration, and management of Changbai mountain ecosystems in the context of climate change, along with the prediction of future vertical biotic gradient pattern evolution.

Correlation between the three-dimensional hyoid bone parameters and pharyngeal airway dimensions in different sagittal and vertical malocclusions

ObjectiveThis study aimed to explore the relationship between three-dimensional (3D) measurements of the hyoid bone (HB) and pharyngeal airway space (PAS) in relation to sagittal and vertical malocclusion. MethodsA total of 368 cone-beam computed tomography (CBCT) scans were classified into three skeletal groups (Class I, II, and III) and subdivided by vertical growth patterns (hypodivergent, normodivergent, and hyperdivergent). PAS dimensions, including nasopharyngeal, oropharyngeal, hypopharyngeal, and total airway spaces, were measured in surface area, volume, minimum constricted area (MCA), length, and width, HB position and dimension were analyzed in 3D using InVivo 6.0.3 and Dolphin 11.8 software. Data were analyzed using two-way ANOVA, and Bonferroni post-hoc tests, with P ≤ 0.05 considered significant. ResultsThe study found that patients with skeletal Class III and hypodivergent growth pattern had the highest sagittal position of the hyoid bone, while those with skeletal Class II and hyperdivergent pattern had the lowest hyoid length. Nasopharyngeal airway space width was significantly lower in skeletal Class III patients, while volume and area were lower in hyperdivergent patients. Oropharyngeal and hypopharyngeal dimensions were also affected by skeletal class and growth pattern, with hyperdivergent patients having the lowest values. Total pharyngeal volume, area, and minimum constricted area were also affected, with hyperdivergent patients having the lowest values and skeletal Class II patients having the lowest minimum constricted area. ConclusionPharyngeal airway dimensions and hyoid bone parameters vary with malocclusions. The hyoid bone's position influences the airway, identifying patients at risk for airway obstruction and sleep-disordered breathing.

Within-canopy variation in chlorophyll fluorescence parameters can be well captured by vertical patterns of leaf biophysical and chemical traits.

The strong correlation between chlorophyll fluorescence (ChlF) parameters and photosynthesis highlights the need for a comprehensive spatial representation of ChlF parameters within the canopy. Such an approach is essential to advance our understanding and to improve the representation and modeling of water and carbon fluxes at scales ranging from the leaf to the canopy level. However, the challenge remains in determining how to effectively describe and track the variability of ChlF parameters within the canopy. In this study, we determined the variation in leaf biophysical and chemical traits and ChlF parameters along the vertical height of the canopy for several species in a temperate deciduous forest. We observed general associations of height with leaf biophysical and chemical traits and ChlF parameters, although these relationships were species-dependent. In addition, leaf biophysical and chemical traits, particularly light-harvesting pigments, showed significant effects on ChlF parameters. To effectively track variation in ChlF parameters within the canopy, we used gradient-boosted regression (GBR) models driven by leaf traits and species, which explained more than 80% of the variation in all ChlF parameters. Our study demonstrates the feasibility of utilizing leaf biophysical and chemical traits to predict vertical variation in ChlF parameters and provide supportive data for modeling canopy photosynthesis.

Evaluation of Vertical Patterns in Chlorophyll‐A Derived From a Data Assimilating Model of Satellite‐Based Ocean Color

AbstractSatellite‐based sensors of ocean color have become the primary tool to infer changes in surface chlorophyll, while BGC‐Argo floats are now filling the information gap at depth. Here we use BGC‐Argo data to assess depth‐resolved information on chlorophyll‐a derived from an ocean biogeochemical model constrained by the assimilation of surface ocean color remote sensing. The data‐assimilating model replicates well the general seasonality and meridional gradients in surface and depth‐resolved chlorophyll‐a inferred from the float array in the Southern Ocean. On average, the model tends to overestimate float‐based chlorophyll, particularly at times and locations of high productivity such as the beginning of the spring bloom, subtropical deep chlorophyll maxima, and non‐iron limited regions of the Southern Ocean. The highest model RMSE in the upper 50 m with respect to the float array is of 0.6 mg Chl m−3, which should allow the detection of seasonal changes in float‐based biomass (varying between 0.01 and &gt;1 mg Chl m−3) but might hinder the identification of subtle changes in chlorophyll at narrow local scales. Both model and float profiling data show good agreement with in situ data from station ALOHA, with model estimates showing a slight accuracy edge in inferring depth‐resolved observations. Uncertainties in float bio‐optical estimates impede their use as a reliable benchmark for validation, but the general qualitative agreement between model and float data provides confidence in the ability of model to replicate biogeochemical features below the surface, where data is not directly constrained by the assimilation of satellite ocean color.

Cephalometric Evaluation of Children with Short Stature of Genetic Etiology: A Review.

Introduction: A plethora of biological molecules regulate chondrogenesis in the epiphyseal growth plate. Disruptions of the quantity and function of these molecules can manifest clinically as stature abnormalities of various etiologies. Traditionally, the growth hormone/insulin-like growth factor 1 (IGF1) axis represents the etiological centre of final stature attainment. Of note, little is known about the molecular events that dominate the growth of the craniofacial complex and its correlation with somatic stature. Aim: Given the paucity of relevant data, this review discusses available information regarding potential applications of lateral cephalometric radiography as a potential clinical indicator of genetic short stature in children. Materials and Methods: A literature search was conducted in the PubMed electronic database using the keywords: cephalometric analysis and short stature; cephalometric analysis and achondroplasia; cephalometric analysis and hypochondroplasia; cephalometric analysis and skeletal abnormalities; cephalometr* and SHOX; cephalometr* and CNP; cephalometr* and ACAN; cephalometr* and CNVs; cephalometr* and IHH; cephalometr* and FGFR3; cephalometr* and Noonan syndrome; cephalometr* and "Turner syndrome"; cephalometr* and achondroplasia. Results: In individuals with genetic syndromes causing short stature, linear growth of the craniofacial complex is confined, following the pattern of somatic short stature regardless of its aetiology. The angular and linear cephalometric measurements differ from the measurements of the average normal individuals and are suggestive of a posterior placement of the jaws and a vertical growth pattern of the face. Conclusions: The greater part of the existing literature regarding cephalometric measurements in short-statured children with genetic syndromes provides qualitative data. Furthermore, cephalometric data for individuals affected with specific rare genetic conditions causing short stature should be the focus of future studies. These quantitative data are required to potentially establish cut-off values for reference for genetic testing based on craniofacial phenotypes.

Vertical Distribution Patterns of Nitrogen and Phosphorus in Soil Solution: Insights from a Wetland Trial Site in the Li River Basin

Vertical Distribution Patterns of Nitrogen and Phosphorus in Soil Solution: Insights from a Wetland Trial Site in the Li River Basin

Influence of the Rater's Gender on Assessing Facial Beauty in Adult Patients With Vertical and Horizontal Growth Patterns.

Background The evaluation of attractiveness varies from one civilization, culture, and environment to another and between individuals. Gender can also play a role in determining the standards of attractiveness. The purpose of this study was to evaluate the effect of the rater's gender on the assessment of adult facial attractiveness with a vertical and horizontal growth pattern in patients with skeletal Class I malocclusion. Methodology The study sample comprised extraoral photos taken before the treatment of 120 patients (30 males and 30 females in each group) with skeletal Class I malocclusion and vertical and horizontal growth patterns according to the Bjork sum aged between 18 and 25 years. A panel of 30 laypersons (aged 19-25 years with an average age of 23 ± 0.53 years), including raters from both genders, were selected equally using a disproportionate stratified sampling method through a computer-generated list. The raters used the visual analog scale (VAS) to provide a score for each photograph's aesthetic quality. The most attractive group, which received the greatest aesthetic score, and the least attractive group, which received the lowest aesthetic score, were the two groups formed based on each photograph's mean aesthetic scores. Overall, 13 patients were chosen for each group. Subsequently, the average assessment score for every patient photo set was determined. Independent-sample t-tests were employed to ascertain if the raters' gender made a statistically significant difference in assessing patients with vertical and horizontal growth patterns. Results There were statistically significant differences between the gender of raters in evaluating female patients with vertical growth patterns (p < 0.001), where the average rating of the female raters was significantly greater than that of the male raters in evaluating female patients. In addition, there were statistically significant differences between the gender of raters in evaluating female patients with horizontal growth patterns (p = 0.009), where the average rating of the male raters was significantly greater than that of the female raters in evaluating female patients. Conclusions There is a limited effect of the rater's gender in evaluating facial aesthetics. However, the facial features of female patients with long faces are preferred by females more than males, and males are more critical in evaluating these patients. On the other hand, males favor the facial features of female patients with short faces more than females, and females are more critical in evaluating these patients. These results suggest considering patients' personal characteristics with vertical and horizontal growth patterns during diagnosis and treatment planning.

Comparative analysis of microbiome inhabiting oxygenated and deoxygenated habitats using V3 and V6 metabarcoding of 16S rRNA gene

We examine how oxygen levels and the choice of 16S ribosomal RNA (rRNA) tags impact marine bacterial communities using Next-Generation amplicon sequencing. Analyzing V3 and V6 regions, we assess microbial composition in both Oxygen minimum zones (OMZ) and non-OMZ (NOMZ) areas in the Arabian Sea (AS) and the Central Indian Ocean basin (CIOB) respectively. Operational taxonomic units (OTUs) at 97% similarity showed slightly higher richness and diversity with V6 compared to V3. Vertical diversity patterns were consistent across both regions. NOMZ showed greater richness and diversity than OMZ. AS and CIOB exhibited significant differences in bacterial community, diversity, and relative abundance at the order and family levels. Alteromonadaceae dominated the OMZ, while Pelagibacteraceae dominated the NOMZ. Synechococcaceae were found exclusively at 250 m in OMZ. Bacteria putatively involved in nitrification, denitrification, and sulfurylation were detected at both sites. Dissolved oxygen significantly influenced microbial diversity at both sites, while seasonal environmental parameters affected diversity consistently, with no observed temporal variation.

Bacterial Diversity and Vertical Distribution Patterns in Sandy Sediments: A Study on the Bacterial Community Structure Based on Environmental Factors in Tributaries of the Yangtze River.

Bacterial diversity and its distribution characteristics in sediments are critical to understanding and revealing biogeochemical cycles in sediments. However, little is known about the relationship between biogeochemistry processes and vertical spatial distribution of bacterial communities in sandy sediments. In this study, we used fluorescence quantitative PCR, high-throughput sequencing technology and statistical analysis to explore the vertical distribution pattern of bacterial community diversity and its influencing factors in sandy sediments of the Yangtze River Basin. The aim is to enrich the understanding of the ecological characteristics and functions of bacteria in river ecosystems. The results showed that both sediment bacterial abundance and diversity showed a gradual decrease from surface to bottom in the vertical distribution. The main environmental factors that influenced the bacterial distribution pattern were pore water dissolved oxygen (DO), total nitrogen (TN) concentration and sediment nitrogen (N) content. The dominant bacterial species, Massilia and Flavobacterium, are suitable for growth and reproduction in high oxygen and nutrient-richer environments, while Limnobacter prefers low oxygen or anaerobic conditions. The vertical distribution pattern of bacteria and its influencing factors in river sandy sediment found in this study differ from the results in mud sediment, which may be related to the larger granular gap between sandy sediment and the lower content of organic matter. The findings of this study further our understanding of the distribution patterns and ecological preferences of microbial communities in river sediments, providing insights into how these communities may adapt to varying environmental conditions.

Vertical niche and trait associations in Central African amphibians

AbstractTropical forests are vertically complex and offer unique niche opportunities in the form of resources, climate, and habitat gradients from the forest floor to the canopy. Rainforest amphibians have diversified within this vertical space, resulting in partitioned niches and corresponding morphological, behavioral, and reproductive traits. However, a lack of data regarding the vertical niche space used by amphibian species has prevented a nuanced analysis of the form‐function relationship between traits and vertical height. We performed 74 ground‐to‐canopy surveys for amphibians in the tropical rainforest of Gabon and described the vertical stratification patterns of the assemblage in terms of richness, abundance, and species‐specific vertical niches. We determined that the community shift in richness and abundance between the ground and understory was pronounced, while the community change from understory to canopy was gradual. We analyzed the relationships between amphibian traits with vertical height using linear mixed effects models, finding strong support (&gt;60% variance explained) that frogs with bigger toes in relation to their length access greater height in the canopy. This relationship provides support for the form‐function hypothesis: that morphology changes predictably to meet the functional demands of species along niche gradients. Furthermore, we documented differences in the vertical heights of species according to their reproductive modes, highlighting the potential impact of reproductive mode diversity on the vertical stratification patterns of amphibian assemblages.

Two-Dimensional Amphibian Diversity along a 3500 m Elevational Gradient at the Eastern Edge of the Qinghai-Xizang Plateau.

Amphibians serve as reliable indicators of ecosystem health and are the most threatened group of vertebrates. Studies on their spatial distribution pattern and threats are crucial to formulate conservation strategies. Gongga Mountains, with a peak at 7509 m a.s.l. and running latitudinally, are in the center of the Hengduan Mountains Range and at the eastern steep edge of the Qinghai-Xizang Plateau, providing heterogeneous habitats and varied niches for amphibians. In this study, we combined 83 days of field work with information from 3894 museum specimens that were collected over the past 80 years, and identified twenty amphibian species belonging to seven families and twelve genera by morphology. Of these species, seven were listed in the threatened categories of the Red List of China's Biodiversity and thirteen were endemic to China. Ten species were found on the plateau side (western slope) and eleven species were found on the other side close to the Sichuan Basin (eastern slope). Only one species was found on both sides, indicating different community structures horizontally. The species richness was unimodal vertically and peaking at mid elevation on both sides, with the maximum number (ten vs. nine) of species occurring at 3300-3700 vs. 1700-1900 m a.s.l. and in different types of vegetation. The elevation span and body length of species distributed on both slopes did not show significant differences. These findings help to understand the horizontal and vertical distribution pattern of amphibian diversity, laying a foundation for future biogeographical and conservation research in this area.

Relation between orthodontic malocculusion and maxillary sinus volume.

This study aimed to determine maxillary sinus volume (MSV) in different skeletal malocclusion classes and the correlation between MSV and craniofacial morphology on Cone Beam Computed Tomography (CBCT). The study was performed retrospectively on CBCT images of individuals aged 12-24 years. A total of 129 patients (70 females, 59 males) with a normal vertical growth pattern (27° ≤ SNGoMe ≤ 38°) were divided into three groups according to malocclusion. Group 1 consisted of Class I (1 ≤ ANB ≤ 4) (n = 46) patients, Group 2 consisted of Class II (ANB > 4) (n = 47) patients, and Group 3 consisted of Class III (ANB < 1) (n = 36) patients. Four angular (SNA, SNB, ANB, SNGoMe) and linear (S-N, ANS-PNS, S-Ar, N-ANS) parameters were measured to evaluate craniofacial morphology. Right and left MSV were measured using Dolphin 11.0 (Dolphin Imaging, Chatsworth, CA, USA) Imaging software. Pearson's correlation analysis was performed to assess statistical correlation. MSV was larger in males than females (male AMSV = 14244.1 ± 4735.8, female AMSV = 12778.2 ± 4606.9 p = 0.011) in the general population, but just the Class II group showed this (male AMSV = 16089.6 ± 4330.4, female AMSV= 12705.9 ± 3210.2, p = 0.008). RMSV and LMSV were similar (female p = 0.181 male p = 0.097), and MSV showed no significant differences between the different malocclusion classes in both sex (female p = 0.315, male p = 0.118). In the Class III group, SNB was positively correlated with RMSV (r = 416, p = 0.012). MSV showed significant positive correlation with N-ANS in all groups (Class I r = 0.359, p = 0.014, Class II r = 0.336, p = 0.021, Cl III r = 0.387, p = 0.02). In the Class II and Cl III groups, there is a statistically significant correlation between MSV and the S-N parameter (Class II r = 0.304, p = 0.038, Class III r = 0.412, p = 0.013). ANS-PNS parameter was measured at the lowest statistically significant level (female 43.1 ± 3.9a, p < 0.001, male 43.1 ± 4.3a, p < 0.001) in the Class III group but no correlation was found with MSV. Only Class II group showed a weak positive correlation between MSV and ANS-PNS (r = 0.314, p = 0.032). There was no difference regarding MSV between malocclusion classes. Class II males exhibit significantly larger MSV compared to females. There is a correlation between MSV and SNB, S-N, N-ANS and ANS-PNS parameters for various orthodontic skeletal patterns. Further studies are needed to understand the relationship between MSV and different skeletal structures.

Latitudinal variations of iron chemical speciation in the euphotic zone of the central Pacific Ocean

The concentrations of dissolved iron (DFe), iron-binding ligands (LFe), and electroactive humic-like substances (eHS) were revealed in the upper 200 m along the 170°W latitudinal transect of the central Pacific Ocean in summer, which was weakly influenced by terrestrial input. DFe was largely depleted throughout the transect, except in the Bering Sea, and below 100 m in the North Pacific Subarctic Gyre. The concentration of LFe was lowest within the subtropical gyres and was lower in the Southern Hemisphere, which is consistent with the results from the Atlantic Ocean. The vertical distribution of LFe was relatively constant in the subtropical regions, whereas in the subarctic regions the subsurface maximum appeared around or over the subsurface chlorophyll maximum at some stations. The higher concentration of LFe in the subarctic regions coincides with a lower stability constant, which suggests a higher contribution of weaker ligands, including humic and exopolymeric substances. The horizontal and vertical distribution patterns of eHS were largely similar to those of LFe, supporting their significant contribution to iron-binding capacity in the upper 200 m, particularly in the subarctic regions. However, the eHS concentration was only weakly correlated with that of the fluorescently determined humic-like substances, demonstrating the substantially different chemical properties of the two humic-like substances. The strong positive correlation between the concentrations of eHS and chlorophyll a and Synechococcus strongly suggests their biological origins. However, further research is required to examine whether eHS are directly produced by phytoplankton or released via relevant biological processes, such as grazing, bacterial composition, and viral lysis.

Quantitative Evaluation and Evolution Characteristics of Consistency Level of Black Soil Conservation Policy, Taking China’s Black Soil Protection Policy as an Example

Scientifically evaluating China’s black soil protection policy and exploring its evolution characteristics are crucial for promoting high-quality and efficient black soil protection projects worldwide. Utilizing the Policy Modeling Consistency (PMC) index model, the effectiveness of China’s black soil protection policy system is assessed. Building upon this evaluation, the research delves into the evolution process of the black soil protection policy system, examining its dynamic characteristics across different government levels. Through the application of text mining technology and visual analysis techniques, the study explores four dimensions: keyword co-occurrence, vertical synergy calculation, policy theme identification, and policy tool analysis. The results show the following: (1) The PMC index showed a phased growth trend, and various indicators gradually improved and tended to be stable. (2) Government policies at the same level exhibit progressive evolution patterns in terms of policy keywords and themes. (3) Across different levels of government, there are hierarchical lag evolution rules observed in policy keywords and provincial policy tools. Additionally, policy keywords display vertical synergy evolution patterns. In conclusion, future black soil conservation policies need to reduce hierarchical delays, enhance the coverage and comprehensiveness of policy content, and establish a sound policy feedback mechanism. The conclusions of the study are significant for improving management approaches throughout the black soil zones of the world.