Vector Modulation Direct Torque Control Research Articles

Design and Xilinx Virtex-field-programmable gate array for hardware in the loop of sensorless second-order sliding mode control and model reference adaptive system–sliding mode observer for direct torque control of induction motor drive

This article aims first to propose an improved space vector modulation–direct torque control in order to enhance the induction motor performance using: (1) a super-twisting controller and (2) a novel model reference adaptive system based on a sliding mode observer. Second, due to the complexity of the suggested control algorithm, this article deals also with a hardware implementation on a field-programmable gate array board. Indeed, the field-programmable gate array is mainly chosen to reduce the execution time, thanks to its parallel processing which significantly improves the quality of the control system by reducing the sampling period, and consequently the delays in the control loop. Besides, the super-twisting controller is proposed to enhance the speed regulation loop which is a second-order sliding mode control technique that uses a continuous control law to prevent the chattering phenomenon induced by the first-order sliding mode control technique. Moreover, the high performance control requires information about the rotor speed which can be obtained by a sensor. Generally, the use of the speed sensor increases the system cost and size, and reduces its system reliability. Therefore, a combination between a model reference adaptive system observer and a sliding mode observer is suggested for speed estimation and overcoming the sensitivity of the classical model reference adaptive system observer against uncertainties and stator resistance variations. The performance of the proposed space vector modulation--direct torque control--super-twisting controller with the model reference adaptive system--sliding mode observer algorithm of an induction motor is verified through simulation, hardware co-simulation and experimental validation utilizing a field-programmable gate array Virtex-5-ML507 board. The performance of the suggested sensorless control method is compared also with other recent published schemes.

A Low Torque Ripple Direct Torque Control Method for Interior Permanent Magnet Motor

This paper proposes a simple method to generate stable voltage commands for permanent magnet synchronous motors to achieve low torque ripple based on space vector modulation direct torque control (SVM-DTC). The relationship between applied voltage and electromagnetic torque is first analyzed and the effect of the voltage and flux linkage on torque ripple is discussed. Then, the new method is developed to reduce torque ripple by giving low-fluctuation voltage commands to the voltage source inverter. The magnitude of the voltage command is calculated by avoiding the effect of flux linkage angle that can be estimated inaccurately during motor operation. Therefore, the fluctuation of the voltage command can be significantly reduced. In order to validate the proposed method, Simulink is first used for simulation and the performance of the proposed method is evaluated. It is found that the torque ripple can be substantially reduced while keeping a low switching frequency and improving system response. Then, a hardware-in-the-loop (HIL) technique is applied to test the developed algorithm that is written into a Texas Instruments microcontroller. This validates the simulation results and the proposed method.

High Performance of Space Vector Modulation Direct Torque Control SVM-DTC Based on Amplitude Voltage and Stator Flux Angle

Various aspects related to controlling induction motor are investigated. Direct torque control is an original high performance control strategy in the field of AC drive. In this proposed method, the control system is based on Space Vector Modulation (SVM), amplitude of voltage in direct- quadrature reference frame (d-q reference) and angle of stator flux. Amplitude of stator voltage is controlled by PI torque and PI flux controller. The stator flux angle is adjusted by rotor angular frequency and slip angular frequency. Then, the reference torque and the estimated torque is applied to the input of PI torque controller and the control quadrature axis voltage is determined. The control d-axis voltage is determined from the flux calculator. These q and d axis voltage are converted into amplitude voltage. By applying polar to Cartesian on amplitude voltage and stator flux angle, direct voltage and quadratures voltage are generated. The reference stator voltages in d-q are calculated based on forcing the stator voltage error to zero at next sampling period. By applying inverse park transformation on d-q voltages, the stator voltages in α and β frame are generated and apply to SVM. From the output of SVM, the motor control signal is generated and the speed of the induction motor regulated toward the rated speed. The simulation Results have demonstrated exceptional performance in steady and transient states and shows that decrease of torque and flux ripples is achieved in a complete speed range.