Coefficient Values Research Articles

A novel numerical method to evaluate the heat transfer characteristics of complicated CICC structures

In this article, we propose a numerical model for calculating the external heat transfer coefficient between the bundle region and its wall for cables in conduit conductor (CICC). With the assumption of local thermal equilibrium, one macro equation describing the steady heat transfer on the cross section of the CICC can be obtained. A key parameter, the effective transverse thermal conductivity keff, which takes the contribution of both strands and flowing fluid into consideration, is introduced. To calculate the effective transverse thermal conductivity keff, we first obtain the true distribution of different phases (fluid, copper and superconducting material) on a cross section of CICC with the help of the image recognition technique. Based on this, the value of the effective transverse thermal conductivity keff can be calculated numerically. Due to the large difference among the component thermal conductivities (at 4.5 K, typical values of the thermal conductivity of liquid helium, superconducting material and copper are kHe=0.024Wm−1K−1, kNb3Sn=0.04Wm−1K−1 and kCu=708Wm−1K−1; and the maximal ratio of thermal conductivity can be as high as about 30,000), the high-performance finite analytical method (FAM) is recommended to calculate keff. After obtaining the effective transverse thermal conductivity keff of the bundle region, the heat transfer coefficient can be calculated directly by solving a simple Poisson equation under proper boundary conditions. Two case studies are performed, including the JT-60 Super Advanced (JT-60SA) CICC and the dual channel International Thermonuclear Experimental Reactor, Toroidal Field Performance Sample (ITER-TFPS). The calculated values of heat transfer coefficient are consistent with the experimental results, which verifies our proposed model.

Assessing the deposition of heavy metals in edaphotopes and synantrophy vegetation under the conditions of technological pollution of the city

The object of this study is a regional center with a developed industry and a significant traffic load. The study provides an assessment of the impact of the urbanization process on the conditions of development of urban edaphotopes and their role in the functioning of urban ecosystems. It was determined that the geochemistry of the soils of urban ecosystems is significantly different from natural landscapes, which is due to the symbiosis of natural and anthropogenic factors. The content of mobile forms of heavy metals in the soil of 14 localities of different functional zones within the city was investigated. A comparative assessment of the spatial heterogeneity of the content of heavy metals in the vegetative organs (root, shoot) of the diagnostic species Polygonum aviculare L. was performed. Based on the sources of emission of heavy metals and the formed geochemical anomalies, a direct dependence was established on their accumulation by the vegetative organs of Polygonum aviculare L. According to the calculated biological absorption coefficient (BAC), high bioavailability for the accumulation of man-made toxicants Cu, Zn, Pb, Cd by the phytomass of Polygonum aviculare L. was proven. It was determined that the content of heavy metals in different parts of the test object is due to their physiological ability to accumulate these toxicants in the root and above ground mass. Active translocation of toxicants from the soil to the roots is characteristic of localities with intense influence of man-made factors, for which the value of the bioavailability coefficient varies within 0.6>BAC<0.85. Correlation coefficients between the content of heavy metals in the atmosphere, soil, and vegetative organs of the plant were determined. The research allows us to evaluate the prospects for using Polygonum aviculare L. as a cumulative indicator of metal pollution in urban technogenic ecosystems and their high phytoremediation value under conditions of environmental pollution with heavy metals

The Influence of the Chemical Composition of Flax and Hemp Fibers on the Value of Surface Free Energy.

The article presents the exploration of flax and hemp fibers' surface free energy depending on the chemical composition of the fiber, which is closely related to the plant variety and the method of extracting the fiber. For this purpose, tests of the surface free energy (SFE), evaluation of the percentage content of individual fiber components and FTIR analyses were conducted. The research was carried out with the use of fibrous materials prepared in three different ways: 1. To analyze the effect of subsequent stages of flax fibers refining process on chemical composition and SFE, 2. to explore the dependence of fiber SFE on hemp variety, the water-retting hemp fibers were used, 3. To evaluate the influence of the retting method of hemp fibers BIAŁOBRZESKIE variety on SFE, the fibers extracted with the use of dew and water retting were used as the research material. The study confirmed that the content of individual components in the fiber influenced its sorption capacity and therefore determined its hydrophilic properties. The values of Pearson's linear correlation coefficients determined in the statistical analysis proved that the surface free energy was strongly correlated with the content of individual components in the fibers. Understanding the wettability characteristics of bast fibers will allow modeling the properties of products made of these fibers and designing surface modification processes in order to obtain specific functionality of textile products, depending on their intended utilization.

Quantitative assessment of muscle fatigue during rowing ergometer exercise using wavelet analysis of surface electromyography (sEMG).

In this paper, we present a quantitative assessment of muscle fatigue using surface electromyography (sEMG), a widely recognized method that is conducted through various analytical approaches, including analysis of spectral and time-frequency distributions. Existing research in this field has demonstrated considerable variability in the computational methods used. Although some studies highlight the efficacy of wavelet analysis in dynamic motion, few offer a comprehensive method for determining fatigue and applying it to specific movements. Previous research has focused primarily on discerning differences based on sport type or gender, with a notable absence of studies that presented results for quantifying fatigue during exercise with rowing ergometers. Developing on our previous work, where we introduced a method for determining muscle fatigue through wavelet analysis, considering biomechanical aspects of limb position changes, this current article serves as a continuation. Our study refines the research approach for a selected group, focusing on fatigue determination using the previously established method. The results obtained confirm the effectiveness of DWT analysis in assessing muscle fatigue, as evidenced by the achievement of negative values of the regression coefficients of Median Frequency (MDF) during exercises performed to maximal fatigue. Furthermore, it has been confirmed that the homogeneity of the group and, in the case of the examined group, the results previously achieved or lower limb strength do not have an impact on the results. Finally, we discuss the main limitations of our study and outline the subsequent steps of our investigation, providing valuable information for future investigations in this field.

Analysing the suitability of CaTiO3/Ca1–xSrxTiO3/SrTiO3 perovskite for fabrication of optoelectronic devices using QuantumATK tool: a study for electronic and optical properties

Calcium Titanate (CaTiO3) as a material has been researched for various applications like those in capacitors, piezoelectric devices and ceramic applications. Same has been possible owing to the exhibition of various characteristics of this material like high melting point (1,625 °C) and dielectric properties. However, only limited studies have been conducted to understand the impact of Strontium (Sr) doping and possibility of adopting this material into any kind of optoelectronic applications. This paper carries on an in-depth analysis on CaTiO3 and study effect of Sr as a dopant on its properties. Analysis has been carried out using Quantum ATK tool based on DFT approximations. CaTiO3 perovskite properties were studied by using the GGA (Generalized Gradient Approximation) and PBE (Perdew–Burke–Ernzerhof) functionals, which are used with the LCAO calculator. As a result of the inclusion of Sr at the Ca site, the electronic band structure of CaTiO3 was changed by the introduction of a gamma point. Bandgap of CaTiO3 was analysed to be dependent on the Sr site concentration and increased from 2.3 eV (Direct bandgap) to 2.3612 eV (Indirect bandgap), when Sr and Ca site concentration were equal, but it decreased with further increase in Sr site concentration to 1.7155 eV. Pure CaTiO3’s projected density of states changed after doping, providing evidence for the effects of the dopant on the system. As a result of an examination of the optical properties of both systems, it is found that CaTiO3 at 380 nm (close to infrared) exhibits an effective extinction coefficient (k) value of 0.78, whereas at 600 nm, the attenuation of light decreases to zero. This makes Sr doping in CaTiO3 another attractive candidate for optical devices in addition to its ability to change optical properties.

Validation of body surface colonic mapping (BSCM) against high resolution colonic manometry for evaluation of colonic motility

Abnormal cyclic motor pattern (CMP) activity is implicated in colonic dysfunction, but the only tool to evaluate CMP activity, high-resolution colonic manometry (HRCM), remains expensive and not widely accessible. This study aimed to validate body surface colonic mapping (BSCM) through direct correlation with HRCM. Synchronous meal-test recordings were performed in asymptomatic participants with intact colons. A signal processing method for BSCM was developed to detect CMPs. Quantitative temporal analysis was performed comparing the meal responses and motility indices (MI). Spatial heat maps were also compared. Post-study questionnaires evaluated participants’ preference and comfort/distress experienced from either test. 11 participants were recruited and 7 had successful synchronous recordings (5 females/2 males; median age: 50 years [range 38–63]). The best-correlating MI temporal analyses achieved a high degree of agreement (median Pearson correlation coefficient (Rp) value: 0.69; range 0.47–0.77). HRCM and BSCM meal response start and end times (Rp = 0.998 and 0.83; both p < 0.05) and durations (Rp = 0.85; p = 0.03) were similar. Heat maps demonstrated good spatial agreement. BSCM is the first non-invasive method to be validated by demonstrating a direct spatio-temporal correlation to manometry in evaluating colonic motility.

Nanoscale Ni/Mo/MoO3/Ni memristor for synaptic applications

AbstractFor the first time, a physics‐based modelling of a nanoscale Ni/Mo/MoO3/Ni memristor is presented in this letter by inserting a ‘Mo:Capping layer’ between the top electrode (Ni) and the insulating layer (MoO3). The proposed memristor has stable hysteresis I–V characteristics as well as a significant reduction in ‘Forming voltage’ (VFORM) to 0.75 V. The simulated resistive switching responses using the COMSOL Multiphysics package demonstrate consistently low values of coefficient of variability (CV) with 14.31% and 14.85% for the SET and RESET modules, respectively, during cycle‐to‐cycle variations along with a low compliance current (ICC) of 193 µA. In addition to observing synaptic plasticity behaviour, it also examines how ramp‐rates impact ‘Potentiation’ and ‘Depression’ as memristor conductance (G) is closely related to synaptic weights.

Effect of hydrological variability on suspended sediment load at a river junction: a case study

Abstract Confluences act as crucial intersection in a fluvial system as they regulate the flow, sediment, and geomorphological stability. Two of the natural occurrences that have an effect on hydro-morphological processes that characterize the channel are sediment movement and stream discharge. However, assessments of suspended sediment distribution patterns across channel confluences and functions of tributaries on sediment transfer in downstream streams are still inadequately explored. To fulfil this, a year-long field investigation was conducted around river confluence at various time scales during the hydrological season. The bathymetry of the confluence was performed using digital echo-sounding equipment, electro-magnetic current meter, and differential global positioning equipment. This study uses in situ measurement and empirical techniques to quantify the spatiotemporal distribution of suspended sediment particles. Furthermore, Yang's formula was used to analyze the sediment concentration, and several statistical standards were employed to establish a differentiation between predicted and observed data. The results illustrated that a good agreement has been achieved among the calculated and measured statistics based on the correlation coefficient value. According to the findings, 8% fewer errors in the quantification of suspended sediment were induced in the tributary than in the main river because of the very low flow of the tributary. The present ramifications can help increase our database and understanding of the dynamics of major river confluences.

Barcode-style lateral flow immunochromatographic strip for the semi-quantitative detection of ochratoxin A in coffee samples

Ochratoxin A (OTA) is a mycotoxin contaminating agricultural products produced by fungi, associated with important toxic effects. Thus, the development of fast, sensitive, and economical approaches for OTA detection is crucial. In this study, a barcode-style lateral flow assay for the semi-quantitative detection of OTA in coffee samples was developed. To achieve this goal, a BSA-OTA complex was immobilized in three test zones to compete with OTA molecules in the sample for binding with anti-OTA antibodies labeled with gold nanoparticles. Different concentrations of OTA in the sample produced distinct colour patterns, allowing semi-quantification of the analyte. The assay exhibited high sensitivity, with a limit of detection of 2.5 µg.L−1, and high reproducibility, with variation coefficient values between 2% and 13%. Moreover, the colour patterns obtained in the analysis with coffee samples were similar to the results obtained with standard OTA solutions, demonstrating a reliable applicability in real samples.

The Relationship between Resilience and Overthinking in Adolescents

The aim of this research is to 1) Find out whether there is a relationship between resilience and overthinking in adolescents. 2) See how high the level of resilience is in adolescents. 3) See how high the level of overthinking is in adolescents. 4) Find out which resilience level scale items are identified as not optimal or low; which can be proposed as guidance topics. 5) Find out which overthinking scale items are identified as not optimal or high; which can be proposed as a guidance topic. This research method is quantitative correlational research. This research was aimed at adolescents at Charitas Jakarta High School. The respondents in this study were 218 adolescents. The measuring instruments used are surveys and data collection instruments for two variables, namely the resilience and overthinking. Items are declared valid with the validity coefficient value, namely r ≥ 0.30 and p value 0.05, and the item is declared reliable when the reliability coefficient is greater than 0.70 (r1 0.70). The results of this study prove that: 1) There is a negative relationship with a high level of significance because the Pearson's r value is -0.688 and p .001. 2) The level of resilience possessed by young students at Charitas Jakarta High School is classified as moderate and tends to be high. This is shown by a total of 218 respondents or adolescents who answered the questionnaire. It shows that there are 134 adolescents indicated to be at a moderate level of resilience, 49 others are at a high level of resilience and 6 adolescents are indicated to have very high resilience. 3) The level of overthinking among adolescents is in the medium position. This is proven by a total of 218 adolescents or 48.17% of respondents who are at the level of medium overthinking tends to be low. 4) The items from the resilience variable that were indicated to be low were found and 4 guidance themes were proposed. 5) The items from the overthinking variables that were indicated as high were obtained and 3 guidance topics were proposed.

Validity and reliability of Korean version of the nursing staff preparedness for palliative and end-of-life care in long-term care homes: A methodological study

Purpose: Globally, the issue of palliative and end-of-life care (PEOLC) in nursing homes is a common concern, and the need to measure the preparedness of nursing staff for end-of-life care is increasing. This study aimed to verify the validity and reliability of the Korean version of the self-reported scale for the Staff Preparedness for PEOLC in long-term care homes. Methods: A total of 161 staff took part in the study; among them were nine nurses, 19 nursing assistants, 133 care workers at four nursing homes located in Wonju and Suncheon cities, South Korea. The scale was translated according to the guidelines of World Health Organization guidelines and Consensus-Based Standards for the Selection of Health Measurement Instruments, and its reliability and validity were evaluated through assessing its internal consistency, stability, and construct validity (confirmatory factor analysis, CFA). Results: CFA confirmed that the measurement tool had a good fit (comparative fit index=.96, Turker-Lewis index=.95, root mean-squared error of approximation=.07). The items’ internal consistencies of the items were found to be reliable with Cronbach’s alpha=.94; the Pearson’s correlation coefficient between test and retest of the tool was .86 (p&lt;.001); and the intraclass correlation coefficient value was .91 (95% confidence interval: .85~.96). Conclusion: The Korean version of the Staff Preparedness for PEOLC in long-term care homes was confirmed to be a useful and reliable scale for measuring the preparedness of nursing staff in Korean long-term care facilities in Korea for PEOLC.

Fuzzy Divergence Measure Based on Technique for Order of Preference by Similarity to Ideal Solution Method for Staff Performance Appraisal

Fuzzy set theory has extensively employed various divergence measure methods to quantify distinctions between two elements. The primary objective of this study is to introduce a generalized divergence measure integrated into the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) approach. Given the inherent uncertainty and ambiguity in multi-criteria decision-making (MCDM) scenarios, the concept of the fuzzy α-cut is leveraged. This allows experts to establish a broader spectrum of rankings, accommodating fluctuations in their confidence levels. To produce consistent criteria weights with the existence of outliers, the fuzzy Method based on the Removal Effects of Criteria (MEREC) is employed. To showcase the viability and effectiveness of the proposed approach, a quantitative illustration is provided through a staff performance review. In this context, the findings are compared with other MCDM methodologies, considering correlation coefficients and CPU time. The results demonstrate that the proposed technique aligns with current distance measure approaches, with all correlation coefficient values exceeding 0.9. Notably, the proposed method also boasts the shortest CPU time when compared to alternative divergence measure methodologies. As a result, it becomes evident that the proposed technique yields more sensible and practical results compared to its counterparts in this category.

Understanding the Relationship between Mental Workload and Stress in Special Education Teachers

Children with Special Needs (CSN) have the right to receive inclusive education with teachers as an important factor and the center of the entire education structure. The results of data collection through Focused Group Discussion with Special Education Teachers (SET) in Pangandaran Regency on 27th October 2022, showed that SET sometimes feel anxious about the behaviors shown by CSN at school, such as eating and drinking indiscriminately from items around them that can threaten children's health. And also feel burdened by the hopes of parents who want their child to recover completely after attending special school. Objective: The purpose of this study is to identify the relationship between mental workload and the level of stress of SLTs in Pangandaran Regency. Method: The method in this study is descriptive correlational with a cross-sectional approach. Primary data were collected using the NASA-TLX questionnaire and the SET Stress Level Questionnaire. There were 82 teachers as respondents using a total sampling technique. Result: Data was collected online through a questionnaire distributed to all special education teachers in Pangandaran Regency. The data was processed statistically using the Spearman Rank test which showed a significance of 0.011 (P value &lt;0.05) with a correlation coefficient value of 0.280 which indicated that the strength of the correlation was sufficient (moderate) with a positive correlation direction. Conclusion: It can be concluded that there is a significant relationship between mental workload and the stress level of special school teachers in Pangandaran Regency.

Fabrication of chitosan nanoparticles for the determination of phenylisatin and its analytical application in biological sample

The synthesis of 1Phenylisatin (Ph) incorporated chitosan nanoparticles (Ph CSNPs) was done utilizing the conventional sol–gel method. For the characterization of CSNPs and Ph CSNPs, different techniques like FTIR, SEM, XRD and TEM were utilized. The Ph CSNPs and the pure Ph were interacted with bovine serum albumin (BSA). The results of fluorescence quenching confirm that both the systems are static in nature. The decreased Ksv value for the nanoparticles confirms the increased remedial efficiency of the Ph CSNPs and therefore the synthesized CSNPs can be used as a drug delivery system. The developed fluorescence-based method also reports the quantification and detection limit values for the Ph molecule. The linear dynamic range after the optimization of experimental conditions was found to be 2.91–6.54 µg mL−1. The values of limit of detection (LOD) and quantification (LOQ) for pure Ph system are 0.462 µg mL−1 and 1.54 µg mL−1 respectively, while for the Ph CSNPs system the values are 0.560 µg mL−1 (LOD) and 1.86 µg mL−1 (LOQ). These values were reported with high correlation coefficient values.

PENGARUH KECERDASAN EMOSI TERHADAP KECEMASAN MENGHADAPI ULANGAN AKHIR SEMESTER PADA SISWA KELAS X SMK NEGERI 3 YOGYAKARTA [CORRELATION BETWEEN EMOTIONAL INTELLIGENCE WITH ANXIETY ON PREPARING FINAL SEMESTER EXAM FOR TENTH GRADE STUDENTS OF VOCATIONAL HIGH SCHOOL 3 YOGYAKARTA

This research aims to examine the influence of emotional intelligence on anxiety facing the Final Semester Examination in Class X students at SMK Negeri 3 Yogyakarta. This research is correlational research using a quantitative approach. The research sampling technique used random sampling technique. Data collection instruments used an emotional intelligence level scale and an anxiety scale for facing end-of-semester exams. This research concludes that there is a significant relationship between the level of emotional intelligence and the level of anxiety facing the final semester exams in class X students at SMK Negeri 3 Yogyakarta. The correlation coefficient value is -0.447 and the determination coefficient is 0.200.

Transport of carboxylate salts of varying chain lengths in crosslinked polyether membranes

Carboxylate anions of various chain lengths are important molecules for many applications such as CO2 reduction, membrane-based bioreactors, etc. Also, carboxylate anions are ubiquitous in biological molecules such as amino acids, fatty acids, etc. Therefore, understanding the transport behavior of carboxylates of different chain lengths in polymer materials is important both as a fundamental phenomenon but also for designing materials for applications. Here, we characterized transport behavior by measuring the permeability (P), and total partition coefficient (K) for a series of polymer membranes for four model carboxylate salts—sodium salts of formate (NaOFm), acetate (NaOAc), propionate (NaOPr), and butanoate (NaOBu)—at varied upstream salt concentrations (0.1–1 M) or a series of polyethylene glycol diacrylate (PEGDA)-based membranes with 1) varying pre-polymerization water content; 2) varying uncharged side chain comonomer (polyethylene glycol methacrylate, PEGMA), and 3) varying charged comonomer)2-acrylamido-2-methyl-1-propanesulfonic acid, AMPS). Also, diffusivity values of the four salts through the membranes have been calculated based on the solution diffusion model equation (PK × D), experimentally obtained permeability, and total partition coefficients. For a majority of these membranes, NaOFm's permeability is much higher than the other three carboxylate salts (NaOAc, NaOPr, and NaOBu) seemingly due to the lower chain length and thereby smaller hydrated diameter. In terms of total partition coefficient, a size-based trend is not observed. For example, NaOBu's total partition coefficient (K) is generally the largest among the four, and at higher upstream salt concentrations (1 M), the values of the total partition coefficients of the four salts converge. From this we conclude that the carboxylate salt transport through these PEGDA-based non-porous dense membranes to be primarily driven by kinetics and not sorption.

Kinetic Studies of Effects of Heat on PET Plastics: TGA, DTA, XRD and DSC Analysis

In this work, the effects of heat on plastic waste (PET plastic bottles) were investigated. During thermogravimetric analysis, the kinetics of the PET pyrolysis was studied using a combination of model-fitting and model-free methods. About 12mg of the grinded PET sample was weighed into the ceramic crucible and then heated from temperature of 30 °C to 950 °C at two heating rates of 10°C/min and 20°C /min. Thermogravimetric analysis indicated that the decomposition of plastic waste in a Nitrogen atmosphere can be divided into three stages: the minor loss stage (100°C), the major loss stage (450–520°C) and the stable loss stage (500–900°C). The corresponding weight loss at two different heating rates of 10°C/min and 20°C /min were determined to of 70% and 77.7% respectively. Based on R2 (regression coefficient) values, heating rate of 20oC/min gave the values (0.9279) for the model free method employed (KAS model). When compared to the model fitting, 0.75th order of reaction gave the closest R2 value (0.9643) which also translated to a very close Activation energies of 264 KJ/mol and 255 KJ/mol respectively. All in all, it can be deduced that the activation energy of PET pyrolysis falls within 250 – 280 KJ/mol based on this study. Also, X-Ray Diffraction and Differential Scanning Calorimetry analysis were carried out. The narrow and high nature of the XRD peaks depicted that the sample is crystalline. And lastly, DSC analysis investigated the heat flowing in and out of the PET sample. The exodermal (where cold re-crystallization occurred) and endothermal (where melting occur) peaks were recorded as 165oC and 138oC respectively. It is recommended that other model-free and model-fitting methods should be invested in further research in order to generate a wide range of data for kinetics of PET.

Influence of donor age on liver transplantation outcomes: A multivariate analysis and comparative study.

The growing disparity between the rising demand for liver transplantation (LT) and the limited availability of donor organs has prompted a greater reliance on older liver grafts. Traditionally, utilizing livers from elderly donors has been associated with outcomes inferior to those achieved with grafts from younger donors. By accounting for additional risk factors, we hypothesize that the utilization of older liver grafts has a relatively minor impact on both patient survival and graft viability. To evaluate the impact of donor age on LT outcomes using multivariate analysis and comparing young and elderly donor groups. In the period from April 2013 to December 2018, 656 adult liver transplants were performed at the University Hospital Merkur. Several multivariate Cox proportional hazards models were developed to independently assess the significance of donor age. Donor age was treated as a continuous variable. The approach involved univariate and multivariate analysis, including variable selection and assessment of interactions and transformations. Additionally, to exemplify the similarity of using young and old donor liver grafts, the group of 87 recipients of elderly donor liver grafts (≥ 75 years) was compared to a group of 124 recipients of young liver grafts (≤ 45 years) from the dataset. Survival rates of the two groups were estimated using the Kaplan-Meier method and the log-rank test was used to test the differences between groups. Using multivariate Cox analysis, we found no statistical significance in the role of donor age within the constructed models. Even when retained during the entire model development, the donor age's impact on survival remained insignificant and transformations and interactions yielded no substantial effects on survival. Consistent insignificance and low coefficient values suggest that donor age does not impact patient survival in our dataset. Notably, there was no statistical evidence that the five developed models did not adhere to the proportional hazards assumption. When comparing donor age groups, transplantation using elderly grafts showed similar early graft function, similar graft (P = 0.92), and patient survival rates (P = 0.86), and no significant difference in the incidence of postoperative complications. Our center's experience indicates that donor age does not play a significant role in patient survival, with elderly livers performing comparably to younger grafts when accounting for other risk factors.

In Search of the Proper Dimensions of the Optimum In-Wheel Permanent Magnet Synchronous Motor Design

In this paper, a new approach to the optimized design of outer rotor Permanent Magnet Synchronous Motors (PMSMs) for in-wheel light electric vehicle (LEV) applications is presented. The optimized design study is based on various dimensions such as back iron depth, permanent magnet depth and air gap length. The novel method is developed to reveal the quality factor of design (QFD), which implies the maximum possible performance results, and determine the best possible design for in-wheel PMSMs for direct-drive LEV applications. Therefore, the thickness of the back iron, permanent magnet and air gap dimensions are altered accordingly to obtain an optimized design. This design study is conducted for an in-wheel PMSM that has rated values of 2.5 kW, 150 V, 900 min−1, and 24-slot/20-pole configuration intended for LEV propulsion. These designs are simulated in order to obtain the maximized combination of efficiency, shaft power, shaft torque and a minimized combination of total weight, iron losses, copper losses, input current and cogging torque. The measure of the optimized parameters is named QFD, which indicates the goodness of the design through the use of radar charts. The values of the essential coefficients of QFD may vary for different applications, e.g., the design of PMSMs used in traction applications has some certain criteria that imply high-performance operation. Additionally, the QFD can guide motor manufacturers as a starting point for a design study.

Evaluation of cranial nerve involvement in chordomas and chondrosarcomas: a retrospective imaging study.

Cranial nerve involvement (CNI) influences the treatment strategies and prognosis of head and neck tumors. However, its incidence in skull base chordomas and chondrosarcomas remains to be investigated. This study evaluated the imaging features of chordoma and chondrosarcoma, with a focus on the differences in CNI. Forty-two patients (26 and 16 patients with chordomas and chondrosarcomas, respectively) treated at our institution between January 2007 and January 2023 were included in this retrospective study. Imaging features, such as the maximum diameter, tumor location (midline or off-midline), calcification, signal intensity on T2-weighted image, mean apparent diffusion coefficient (ADC) values, contrast enhancement, and CNI, were evaluated and compared using Fisher's exact test or the Mann-Whitney U-test. The odds ratio (OR) was calculated to evaluate the association between the histological type and imaging features. The incidence of CNI in chondrosarcomas was significantly higher than that in chordomas (63% vs. 8%, P < 0.001). An off-midline location was more common in chondrosarcomas than in chordomas (86% vs. 13%; P < 0.001). The mean ADC values of chondrosarcomas were significantly higher than those of chordomas (P < 0.001). Significant associations were identified between chondrosarcomas and CNI (OR = 20.00; P < 0.001), location (OR = 53.70; P < 0.001), and mean ADC values (OR = 1.01; P = 0.002). The incidence of CNI and off-midline location in chondrosarcomas was significantly higher than that in chordomas. CNI, tumor location, and the mean ADC can help distinguish between these entities.