Pollution Load Index Values Research Articles

Quantitative assessment of microplastic contamination in muddy shores of Gulf of Khambhat, India

Microplastics (MPs) have become a global concern due to their widespread distribution in marine ecosystems. The present study was aimed to assess MPs contamination in 21 muddy shores sites situated in the Gulf of Khambhat. From each site, five samples (1 kg each) were collected. In the laboratory, the replicates were homogenated, out of which a 100 g sample was used for analysis. The total number of MPs, shape, colour, size and polymer composition of MPs were assessed. The MPs abundance ranged from 0.32 ± 0.18 particles/g (Jampore) to 2.81 ± 0.50 particles/g (Uncha Kotda) among different study sites. Moreover, threads were recorded maximum followed by films, foams and fragments. In case of MPs colour, black and blue coloured MPs occurred dominantly, with sizes ranging from 1 mm to 5 mm. FTIR analysis identified seven different types of plastic polymers, out of which polypropylene was the dominant plastic polymer (32.46 %) followed by polyurethane (32.16 %), acrylonitrile butadiene styrene (14.93 %), polystyrene (9.62 %), polyethylene terephthalate (4.61 %), polyethylene (3.71 %) and polyvinyl chloride (2.51 %). Based on the results of the Contamination factor (CF) value, Alang, Mahua, Ghogha and Uncha Kotda were identified as very high contaminated sites (CF ≥ 6). Pollution Load Index (PLI) value of entire study area revealed the Gulf of Khambhat as a polluted area with MPs contamination (PLI > 1). While value of Hazardous Index (H) identified 12 study sites as class-V risk category (H value > 10,000). Moreover, Pollution Risk Index (PRI) value revealed fifteen sites as very high contaminated sites (PRI > 1200). Pollution indices can be useful in predicting the level of MPs contamination at the study site. Overall, the present study provides the information on MPs contamination in the coastal region of the Gulf of Khambhat that can be used as a baseline data for future studies on the ecotoxicity of MPs on marine biota.

Assessment of heavy metal pollution and quality in lake water and sediment by various index methods and GIS: A case study in Beyşehir Lake, Turkey

Beyşehir Lake, Turkey's largest freshwater lake, is also a “Drinking Water Reserve”. In the study, heavy metal (As, Cr, Cu, Ni, Zn, Pb, Cd, Hg, Fe, Al, Mn) concentrations of seasonal lake water and bottom sediment samples were determined to evaluate the heavy metal pollution. Several index methods were applied, and pollution assessments were made using the obtained analysis results of lake water and sediment samples. The average concentrations of the heavy metals in the lake waters are observed as Fe > Al > Mn > As>Zn > Ni > Pb > Cr > Cu > Hg > Cd. When the lake waters were compared with the TS 266 (2005) and WHO (2017) limit values, it was determined that lake waters are below the limit values in terms of the heavy metals. According to index results, all of the lake samples are suitable for use as drinking water in accordance with the heavy metal pollution index (HPI) value, all of the samples are in the “low pollution” class in accordance with the heavy metal evaluation index (HEI) and degree of contamination (Cd) values. In addition, the water average concentrations of the heavy metals in the lake sediments are observed as Fe > Al > Mn > Cr > Ni > Zn > Cu > As>Pb > Cd > Hg. The contamination factor (CF) and enrichment factor (EF) revealed that sediments were considerably and moderately polluted by As, Cr, Cu, Ni, Cd, Fe and Mn and low polluted and/or unpolluted by other metals. The calculated pollution load index (PLI) and Igeo values indicate that lake sediments do not carry a risk of heavy metal contamination.

Analysis, spatial distribution and ecological risk assessment of heavy metals in surface soils, the case of Khorramabad, Iran

ABSTRACT In this study, the contents of potentially toxic elements (Cd, Cr, Pb, Cu, Zn, Ni and Mn) in urban surface soils collected from city of Khorramabad were determined to assess the soil contamination rates, potential ecological risks and also spatial distribution of the analyzed elements. In so doing, a total of 55 surface soil samples were collected from 11 sampling sites. After acid digestion of samples, the contents of the elements were determined using flame atomic absorption spectrometer. Then, the pollution rates and potential ecological risks of the soil samples were assessed using various models including geo-accumulation index (I-geo), potential ecological risk index (RI), enrichment factor (EF) and pollution load index (PLI). The spatial distribution of the analyzed elements was estimated using the kriging interpolation technique. Based on the results, the observed mean I-geo values could be classified as “unpolluted” for all heavy metals in the study area. Besides, the EF values of Fe (1), Zn (340), Cr (445), Cd (1000), Ni (605), Cu (874), Pb (316) and Mn (900) indicated that all the elements had extremely severe enrichment. Moreover, the RI values indicated that the whole study area could be categorized as 'moderate'. The values of PLI indicated that the study area could be considered as 'non-polluted'. The calculated values of the studied indices and their spatial distribution showed that the elements concentration in E (G3T4S1) and I (G6T2S2) sampling sites were more than those in the other sites and that, for managing and controlling the anthropogenic activities in those sites, special care and appropriate interventions are needed. In conclusion, while an increase in soil contamination in the study area is expected in the future, the use of bioaccumulator species for biomonitoring and bioremediation of the contaminated areas with potentially toxic elements (PTEs) is recommended.

Abundance, distribution and composition of microplastics in sediment and fish species from an Urban River of Bangladesh

Microplastics (MPs) are a growing concern due to its ubiquitous presence and exceptional stability. We examined the abundance, dispersion, and attributes of MPs in the sediment and fish species of the Turag River in Bangladesh, which separated the industrial city Gazipur from the Mega-city Dhaka. Collected samples were digested and the chemical structure was identified using ATR-FTIR spectroscopy. The concentration of MPs in the sediment ranged from 10 to 35 particles kg−1, with a mean abundance of 19.2 ± 2.44 particles kg−1and MPs of the fragment type account for 34 % of all. The majority of MPs were discovered in the 3-5 mm size range. MPs concentrations in freshwater fish gut from the Turag River ranged from 0.63 ± 0.18 to 7.0 ± 1.1 microplastics individual−1. Fiber was found to be the most commonly ingested MPs type (43 %), followed by fragments (41 %), film (12 %), and foam (4 %). The most common type of MPs was transparent (34 %) followed by red (28 %), white (20 %), green (9 %) and black (8 %). The results showed that demersal (1.87 ± 0.39 items individual−1) and benthopelagic (1.5 ± 0.26 items individual−1) fish species had more MPs than pelagic fish (0.63 ± 0.18 items individual−1) species. Polypropylene (PP) was found to be the most dominant polymer type in the sediment sample, and PS (39 %) in the fish sample. Polyethylene (PE) was discovered to be 30 % and PP 25 % in sediment and fish samples, respectively. Other commonly detected polymer types include polyamide (PA), polystyrene (PS), cellulose acetate (CA), and polyethylene terephthalate (PET). In different sampling sites along the Turag River, the pollution load index (PLI) of MPs contamination was found to be in the risk level category I. The PLI values reflected the city's anthropogenic influence. The findings of the study could be used to establish a baseline for MPs pollution in Bangladesh's vast freshwater ecosystem.

X-ray fluorescence analysis of coastal sediments of Tamil Nadu with a statistical approach

X-ray fluorescence spectroscopy is applied to determine the concentration of essential and toxic heavy metals such as silicon (Si), potassium (K), calcium (Ca), titanium (Ti), iron (Fe), copper (Cu), zinc (Zn), nickel (Ni), and lead (Pb) in the sediments of Kovalam coastal area, Tamil Nadu, India. Fe (599280 ppm), an essential heavy metal/mineral shows the highest average concentration, followed by Si (181593 ppm), Ca (130913 ppm), K (99673 ppm), Ti (77620 ppm), Cu (64 ppm), Ni (43 ppm), Pb (20 ppm), and Zn (8 ppm). Heavy metal contamination was assessed using various pollution indicators such as the geo-accumulation index (Igeo), contamination factor (CF), pollution load index (PLI), and enrichment factor (EF). Si, K, Ca, Ti, Fe, Cu, Ni, Pb, and Zn had mean Igeo values of −1.29, 1.54, 1.07, 3.59, 3.19, 0.64, −1.14, −0.22, and −3.70, respectively. Except for Ti (19.36) and Fe (13.87), the average CF value for determined heavy metals was significantly low. The PLI value ranges from 1.47 to 2.46. Heavy metal EF values are greater than 1 in all sampling locations. Multivariate statistical analyses such as Pearson correlation analysis, cluster analysis, and principal component analysis are performed to identify the sources of heavy metals in the studied sediment samples. The findings indicate that anthropogenic sources such as boating and tourism activities have a probable contribution on the enrichment of K, Ca, Ti, Fe, Cu, and Pb in sediments, necessitating more attention in monitoring of toxic heavy metals (such as Pb) contamination in the coastal environment.

Impact of the Controlled Dump of Fez City (Morocco): Evaluation of Metallic Trace Elements Contamination in the Sediments

In order to qualify and quantify the impact of sediment contamination in hydric settings by metallic trace elements (MTE) emanating from the controlled dump of Fez city (northern Morocco), leachate and sediment sample analyses were carried out. The leachates collected from the 24 sites are characterised by a pH between 6.91 and 8, a COD varying between 430.7 and 7962 mg/L, an NTK content up to 1955 mg/L, with an average of 1514 mg/L, and a nitrate concentration reaching 46 mg/L in some samples, which exceeds the standards for discharges into the natural environment. The chromium content emanating mainly from household waste varies between 1.69 and 4.90 mg/L. The MTE content (As, Cd, Co, Cr, Cu, Ni, Pb, Zn and Fe) of the different leachates varies from one basin to another. The sediments downstream of the dump along the sampling profile show pH values between 7.34 and 8.21 (compared to 7.96–8.82 for the reference samples), and electrical conductivity values fluctuate between 1.21 ms/cm and 5.37 ms/cm for the contaminated sediments (compared to 0.8 ms/cm for the reference sediment). The analysis of metallic trace elements in the sediments by ICP-AES shows that their content varies slightly from one sampling point to another. Furthermore, they do not vary considerably from the surface (0 cm) to the depth (20 cm). The average values of metallic element concentrations are 45.83 ± 2.14 mg/Kg for Cu, 4.40 ± 0.07 mg/Kg for Cd, 43.76 ± 3.40 mg/Kg for Cr, 72.99 ± 1.85 mg/Kg for Ni, 21.71 ± 6.55 mg/Kg for Pb and 102.02 ± 7.28 mg/kg for Zn. In effect, the negative environmental impact of Fez controlled dumping site is ostensibly underlined both by (i) the pollution load index values, which indicate a strong and progressive deterioration along the thalweg, and (ii) the statistical analysis (PCA), which reveals a common origin of the deduced pollutants through the strong correlation between the majority of the analysed elements.

Abundance, characteristics, and ecological risks of microplastics in the riverbed sediments around Dhaka city

Microplastic (MP) pollution has become an escalating problem in Bangladesh due to its rapid urbanization, economic growth, and excessive use of plastics; however, data on MP pollution from fresh water resources in this country are limited. This study investigated microplastics pollution in riverbed sediments in the peripheral rivers of Dhaka, the capital of Bangladesh. Twenty-eight sediment samples were collected from the selected stations of the Buriganga, Turag, and Balu Rivers. Density separation and wet-peroxidation methods were employed to extract MP particles. Attenuated total reflectance-Fourier transform infrared spectroscopy was used to identify the polymers. The results indicated a medium-level abundance of MPs in riverbed sediment in comparison with the findings of other studies in freshwater sediments worldwide. Film shape, white and transparent color, and large-size (1–5 mm) MPs were dominant in the riverbed sediment. The most abundant polymers were polyethylene (PE), polypropylene (PP), and polyethylene terephthalate (PET). Pollution load index (PLI) values greater than 1 were observed, indicating that all sampling sites were polluted with MPs. An assessment of ecological risks, using the abundance, polymer types, and toxicity of MPs in the sediment samples, suggested a medium to very high ecological risk of MP pollution of the rivers. The increased abundance of MPs and the presence of highly hazardous polymers, namely; polyurethane, acrylonitrile butadiene styrene, polyvinyl chloride, epoxy resin, and polyphenylene sulfide, were associated with higher ecological risks. Scanning electron microscopy (SEM) analysis indicated that the MPs were subjected to weathering actions, reducing the size of MPs, which caused additional potential ecological hazards in these river ecosystems. This investigation provides baseline information on MP pollution in riverine freshwater ecosystems for further in-depth studies of risk assessment and developing strategies for controlling MP pollution in Bangladesh.

Contamination assessment and spatial distribution of heavy metals in the Sefidrud Delta coastal lagoons, Caspian Sea, N Iran.

Three coastal lagoons on the Sefidrud Delta, Caspian Sea, were investigated to evaluate heavy metal pollution in sediments. Amirkola Lagoon is located in the eastern part of the delta (abandoned delta lobe) and is aged more than 500 years, whereas Kiashahr and Zibakenar lagoons are in the western or active part delta lobe and formed in the last decades. One hundred six sediment samples and three sediment cores were taken from studied lagoons. The samples were analyzed by ICP-OES. Geo-accumulation index (Igeo), contamination factor (CF), degree of contamination (Cdeg), pollution load index (PLI), and Potential ecological risk index (RI) were employed to determine heavy metal pollution for Co, Cr, Cu, Ni, Pb, V and Zn. Nonparametric statistical analysis (Two-step cluster analysis, analysis of variance, and T-test technique) was used to discriminate the pollution sources. Based on contamination indices, the Kiashahr and Zibakenar lagoons show significant to moderate contamination with Co, Cu, Pb, Zn, and V, whereas the Amirkola Lagoon samples show the lowest metal contamination. PLI values demonstrated metal contamination in the Kiashahr and Zibakenar lagoons but no contamination in the Amirkola Lagoon. Although there was a notable rise in RI values from Amirkola to two other lagoons, all indicated low ecological risk. Statistical methods designated the unique interpretation of contaminant sources. Although the same geogenic origin of sediments in the Sefidrud Delta and lagoons deposits, Co, Zn, and Pb show anthropogenic sources in the newly-formed Kiashahr and Zibakenar lagoons.

Ecological risk assessment of heavy metals in the Sidi Boughaba Lake, Morocco

The goal of the research was to evaluate the heavy metal detection and potential ecological risks in lake’s water. Geological formations consisting essentially of sandstone and quaternary marine or dune sands characterize the study area. With a climate of the Mediterranean type winters are mild and humid, whereas summers hot and dry. At the analysis center of the Faculty of Sciences, the monitoring of ETMs is carried out by ICP-MS, the processing of data and the validation of the analysis method have been drafted according to the NF T 90-120 standard applicable to the analysis in a laboratory. The analysis covers concentrations of heavy metals, which include Cu, Zn, Mn, Fe, Pb and As, in the water. Pollution load index ( PLI) values were above one (>1) which indicates progressive deterioration of the water quality. However, contamination factor ( CF) values of Pb and Cu, ranging from 8.31 to 15.68 and from 5.5 to 28.05 respectively, show that the studied water remains under a strong impact by Pb and Cu. Considering the severity of the ecological risk ( Er) for a single metal, the descending order of contaminants is Cu > Pb > Mn > Fe > Zn. In relation to the total ecological risk index ( RI), water from the lake shows low to considerable ecological risk.

Radiological and environmental hazards of granitic rocks in Wadi Faliq El Sahl and El Waar area, North Eastern Desert, Egypt

Chronologically, the main exposures in the study area include; tonalite, granodiorite, adamellite, Hammamat Sediments, monzogranite, syenogranite, rapakivi syenogranite, alkali feldspar granite and dykes. This work aims to determine the suitability of the granitic rocks for using as ornamental stones through detecting their radiological and ecological impacts. The studied samples were measured radiometrically by using Na-I detector for determination of 226Ra, 232Th and 40K concentrations. External hazard indices (Hex) in some samples are more than unity, also, the (Raeq) are higher than the exemption limits (370 Bq.kg−1) exceeds the upper limit of exposure. The hierarchical cluster analysis (HCA) was applied to investigate the correlation between the radionuclides and the corresponding radiological hazard variables. Based on the statistical analysis, 232Th and 226Ra mainly contribute to the radioactive risk of the studied rocks. Regarding ecological indices, 42.1% of younger granite samples have Pollution load index values greater than 1, indicating deterioration, while the majority of older granite samples are lower than 1 suggesting perfection samples. Where, some sample from the older granitoids and younger granites have many radiological and ecological parameters greater than the recommended international limits, so, these samples should not be used in construction for safety reasons.

Assessment of potentially toxic metal(loid)s contamination in soil near the industrial landfill and impact on human health: an evaluation of risk.

The generation of solid waste is increasing with each passing day due to rapid urbanization and industrialization and has become a matter of concern for the international community. Leachate leakages from landfills pollute the soil and can potentially harm the human health. In this paper, inductively coupled plasma-optical emission spectrometric studies were employed to assess and analyze the composition of metals (Ba, Cd, Pb, Hg, Cu, Cr and Mn) and metalloid (As) in soil samples. Results of Cr, Mn, Cu, As, Ba, Cd, Pb and Hg from CRM (certified reference material, SRM 2709a) of San Joaquin soil were evaluated and reported in terms of percent recoveries which were in the range of 97.6-102.9% and show outstanding extraction efficiency. Other than copper, where the permitted limit set by the EU is specified as 50-140mg/kg in soil, the average amount of all the metals in soil was found within the permissible limits provided by WHO, the European Community (EU) and US EPA. Soil contaminated with Hg (PERI = 100) and Cd (PERI = 145.50) posed an ecological risk significantly. Pollution load index (PLI) value is greater than 1, while degree of contamination (Cdeg) value is less than 32 which indicated that the soil is polluted and considerably contaminated with metals and metalloid, respectively. In terms of the average daily dosage (ADD) of soil, children received the highest doses of all metals (ADDing = 1.315 × 10-7 - 2.470 × 10-3 and ADDderm = 9.939 × 10-7 - 5.292 × 10-11), whereas ADDing (1.409 × 10-8 - 2.646 × 10-4) was found greater in adults. For all metals except for Ba, the hazard quotient (HQ) trend in both children and adults was observed to be HQing > HQderm > HQinh of soil. Children who are at the lower edge of cancer risk had a lifetime cancer risk (LCR) of 2.039 × 10-4 for Cr from various paths of soil exposure.

Comprehensive assessment of seldom monitored trace elements contamination and its anthropogenic impact record in a sediment core from the North Yellow Sea

The environmental status of seldom monitored trace elements (SMTEs) has rarely been reported in the North Yellow Sea (NYS). This study investigated the levels, sources and ecological risks of 18 SMTEs in a 209-cm-long sediment core from NYS. The concentrations of SMTEs exhibited a gradual increasing trend in the upper 70 cm. Based on the assessment results of enrichment factor (EF), geo-accumulation index (Igeo) and contamination factor (CF), obvious enrichment of Cs, Li, and U was observed for the NYS sediments, indicating possible anthropogenic sources, which are consistent with the geochemical background normalized patterns. Moreover, the pollution load index (PLI) values ranged from 0.93 to 1.24 and showed a steadily increasing trend in the upper 70 cm part, indicating gradual deterioration of environment in NYS. Combined with the multivariate statistical analysis results and PLI variations, the first principal component (PC1) with high positive loading on Be, Cs, Ga, Hf, In, Li, Nb, Rb, Sc, Ta and Tl was very likely an “anthropogenic factor”. Therefore, the historical anthropogenic impact record in the NYS was reconstructed based on the PC1 scores, which indicated significant anthropogenic influence over the past 300 years. This study provides valuable information for understanding the pollution history of SMTEs and historical record of anthropogenic impact in the NYS.

Qualitative Assessment of Soil and Sediment Pollution with Some Heavy Metals: A Case Study of Duhok Valley in The Kurdistan Region of Iraq

The current study was conducted on the valley of Duhok and the agricultural lands irrigated from it, where three sites were identified for collecting samples quarterly from soil and sediment using clean plastic bags for the purpose of measuring lead, nickel, cobalt and copper. Pollution load index (PLI), Nemerow pollution index (PIN), Potential Ecological Risk (PER) and Geo-accumulation Index (Igeo) were also calculated according to the internationally approved methods. The results indicated that most of lead, nickel and copper concentrations in soils and sediments exceeded the limits allowed by WHO, reaching annual rates (96.758, 168.746 and 29.88) , (111.25, 219.65 and 48.162) mg.kg-1, respectively. This fluctuation in concentrations was reflected in the values of the studied indicators for both soil and sediment, where 50% and 58% of the studied specimen are of the polluted grade and the remnant are of the non-polluted grade according to the PLI values. So is the case with PIN where 58% of the soil specimen and 41.6% of the sediment samples were of the severe pollution grade, while 25% and 33.3% of the specimen were of the heavy pollution grade and the remnant were slightly pollution grade. The same applies to the results of the PER index values, where 50% and 41.67% of the specimen were from the Medium ecological risk category, and the rest were from the low ecological risk category, likewise for the (Igeo) values, 100% and 96% of the soil and sediment samples were from the Weakly polluted category.

Membrane lipid peroxidation in lichens determined by the TBARS assay as a suitable biomarker for the prediction of elevated level of potentially toxic trace elements in soil

The use of biomarkers defined as measurable biological parameters at the sub-organism level in which structural or functional changes indicate the presence of pollutants is a promising approach to identify affected sites. The aim of the study was to test the suitability of the level of membrane lipid peroxidation in the widespread epigeic lichen Cladonia rei for the assessment of soil pollution and to develop an effective method to recognise elevated concentrations of potentially toxic trace elements in soil. We collected lichen and soil substrate samples from variously polluted sites and determined the level of membrane lipid peroxidation in the thalli using the thiobarbituric acid-reactive substances (TBARS) assay. Based on the concentrations of Zn, Pb, Cd and As in the soil samples, we calculated the Pollution Load Index (PLI) for particular sampling sites to consider the combined effect of several toxic elements. The model of relationships between TBARS concentrations and PLI revealed that membrane lipid peroxidation does not increase linearly with PLI value, which suggests that above a certain threshold, oxidative stress induced activation of defence aimed at counteracting deleterious effects. We observed that if PLI exceeded the value of 100, the concentrations of TBARS were markedly increased and did not drop below 30 nmol g−1 DW. On the other hand, in lichen samples collected at sites with PLI < 10, TBARS concentrations were lower and as a rule did not exceed 25 nmol g−1 DW. Therefore, we concluded that the effect of soil pollution on membrane lipid peroxidation in the thalli of C. rei can be used in passive soil quality biomonitoring, according to the principle that an increased level of membrane lipid peroxidation is predictive for increased concentrations of elements in the host substrate. Given that this species has not been analysed in detail for the use of biomarkers, this study establishes a baseline and supports practicable use of TBARS concentrations in lichens as biomarkers.

Cobalt availability in the soil plant and animal food chain: a study under a peri-urban environment.

Cobalt metal is considered as an essential trace element for the animals. Present investigation was undertaken in the peri-urban area to analyze the cobalt availability in animal food chain by using different indices. Cow, buffalo and sheep samples along with forage and soil samples were collected from the three different sites of District Jhang and analyzed through atomic absorption spectrophotometer. Cobalt values differed in soil samples as 0.315-0.535 mg/kg, forages as 0.127-0.333 mg/kg and animal samples as 0.364-0.504 mg/kg. Analyzed cobalt concentration in soil, forage and animal samples was found to be deficient in concentration with respect to standard limits. Soil showed the minimum cobalt level in Z. mays while maximum concentration was examined in the forage C. decidua samples. All indices examined in this study has values lesser than 1, representing the safer limits of the cobalt concentration in these samples. Enrichment factor (0.071-0.161 mg/kg) showed the highly deficient amount of cobalt enrichment in this area. Bio-concentration factor (0.392-0.883) and pollution load index (0.035-0.059 mg/kg) values were also lesser than 1 explains that plant and soil samples are not contaminated with cobalt metal. The daily intake and health risk index ranged from 0.00019-0.00064 mg/kg/day and 0.0044-0.0150 mg/kg/day respectively. Among the animals, cobalt availability was maximum (0.0150 mg/kg/day) in the buffaloes that grazed on the C. decidua fodder. Results of this study concluded that cobalt containing fertilizers must be applied on the soil and forages. Animal feed derived from the cobalt containing supplements are supplied to the animals, to fulfill the nutritional requirements of livestock.

Receptor model-based sources and risks appraisal of potentially toxic elements in the urban soils of Bangladesh.

Rapid urbanization and industrial development have prompted potentially toxic elements (PTEs) in urban soil in Bangladesh, which is a great concern for ecological and public health matters. The present study explored the receptor-based sources, probable human health and ecological risks of PTEs (As, Cd, Pb, Cr, Ni, and Cu) in the urban soil of the Jashore district, Bangladesh. The USEPA modified method 3050B and atomic absorption spectrophotometers were used to digest and evaluate the PTEs concentration in 71 soil samples collected from eleven different land use areas, respectively. The concentration ranges of As, Cd, Pb, Cr, Ni, and Cu in the studied soils were 1.8-18.09, 0.1-3.58, 0.4-113.26, 0.9-72.09, 2.1-68.23, and 3.82-212.57mg/kg, respectively. The contamination factor (CF), pollution load index (PLI), and enrichment factor (EF) were applied to evaluate the ecological risk posed by PTEs in soils. Soil quality evaluation indices showed that Cd was a great contributor to soil pollution. The PLI values range was 0.48-2.82, indicating base levels to continuous soil degradation. The positive matrix factorization (PMF) model showed that As (50.3 %), Cd (38.8 %), Cu (64.7 %), Pb (81.8 %) and Ni (47.2 %) were derived from industrial sources and mixed anthropogenic sources, while Cr (78.1 %) from natural sources. The highest contamination was found in the metal workshop, followed by the industrial area, and brick filed site. Soil from all land use types revealed moderate to high ecological risk after evaluating probable ecological risks, and the descending order of single metal potential ecological risk was Cd >As >Pb >Cu >Ni >Cr. Ingestion was the primary route of exposure to potentially toxic elements for both adults and children from the study area soil. The overall non-cancer risk to human health is caused by PTEs for children (HI=0.65±0.1) and adults (HI=0.09±0.03) under USEPA safe limit (HI>1), while the cancer risks from exclusively ingesting As through soil were 2.10E-03 and 2.74E-04 for children and adults, respectively, exceeding the USEPA acceptable standard (>1E-04).

Investigation of ecological risk of microplastics in peatland areas: A case study in Vietnam

This study aims to investigate the distribution and ecological risk assessment of microplastics (MPs) in peatland areas located in Long An province, Vietnam's Mekong Delta. In general, polyvinyl chloride (60.7%), polyethylene (25.8%), and polypropylene (11.9%) were the most abundant polymers determined in the thirty sediment samples. The hazard index (HI) remarked a level of III for MPs contamination in Tan Thanh and Thanh Hoa districts. The pollution load index (PLI) and potential ecological risk index (RI) indicated that the contamination risk of MPs polymer types in the studied sites is relatively high. According to PLI values, MPs levels of peatlands in Tan Thanh and Thanh Hoa are high and moderate, respectively, while the peatland sediments in Duc Hue district are less contaminated. Furthermore, ecological risk indexes in the peatland areas were relatively high, with PLIoverall (level III); HIoverall (level V), and RIoverall (extreme danger). Hence, this study proposed a SWOT framework for challenges of MPs pollution in order to manage peatlands appropriately and minimize ecological risks. As a result, several practical strategies and appropriate approaches have been recommended to reduce microplastics towards a circular economy. These findings provide the initial quantitative assessment insights into hazard levels and ecological impacts of MPs in Vietnam's Mekong Delta peatlands.

Ecological and Health Risk Assessments of Heavy Metals Contained in Sediments of Polish Dam Reservoirs.

This study aimed at investigating the distribution of heavy metals (HMs: Zn, Pb, Cd, Ni, Cr, and Cu) in the bottom sediments of 28 reservoirs covered area of Poland. The paper evaluates the pollution of sediments with HMs and their potential toxic effects on aquatic organisms and human health on the basis of results provided by the Chief Inspectorate of Environmental Protection in Poland. The average concentrations of HMs in the bottom sediments of the reservoirs were as follows: Cd &lt; Ni &lt; Cr &lt; Cu &lt; Pb &lt; Zn. (0.187, 7.30, 7.74, 10.62, 12.47, and 52.67 mg∙dm-3). The pollution load index values were from 0.05 to 2.45. They indicate contamination of the bottom sediments in seven reservoirs. The contamination-factor values suggest pollution with individual HMs in 19 reservoirs, primarily Cr, Ni, Cu, and Pb. The analysis showed that only two reservoirs had the potential for toxic effects on aquatic organisms due to high concentrations of Cd and Pb. The hazard index values for all the analyzed HMs were less than one. Therefore, there was no non-carcinogenic risk for dredging workers. The reservoirs were divided into two groups in terms of composition and concentration values. Reservoirs with higher concentrations of HMs in bottom sediments are dispersed, suggesting local pollution sources. For the second group of reservoirs, HMs' concentrations may be determined by regional pollution sources. The analysis showed that Pb, Zn, and Cd concentrations are higher in older reservoirs and those with higher proportions of artificial areas in their catchments. Concentrations of Ni, Cu, and Cr are higher in reservoirs in south Poland and those with higher Schindler's ratios.

Comprehensive assessment of pollution indices, sources apportionment and ecological risk mapping of heavy metals in agricultural soils of Raebareli District, Uttar Pradesh, India, employing a GIS approach

AbstractIn the environment, heavy metal contamination is a well known problem due to its persistence and toxicity. Heavy metal pollution has significantly affected soil properties and functions, resulting in significantly increased land degradation as a result of anthropogenic interventions that include mining and various industrial and agriculture activities. While heavy metals pollution in soil have been studied very rarely in this District, this paper explores the current status of agricultural soil pollution by heavy metals in Raebareli. This study identifies heavy metals as well as their quantities in the soil and their spatial distribution; our study employed various pollutant indices and geographical information system (GIS) techniques. This research work evaluated the physiochemical properties, the pollution load index (PLI), contamination factor (CF) and the degree of contamination and geoaccumulation (Igeo) in sodic soils of the Raebareli District, Uttar Pradesh, India. Uchahaar site (US) has the most polluted soil, while the Bacharawa site (BS) has the least contaminated soil. The soil quality has degraded due to anthropogenic interventions at most sites. There is slight to moderate contamination by heavy metals at all sites. The Igeo values in subSites US1, US2 and US3 included high levels of Cu, Zn, Pb, Mn and Sr. SubSites BS2 and BS3 have high Sr levels and US1 has a high As level all these Subsites have high anthropogenic influences. The PLI values indicate that most of the study subSites come under a slightly polluted class, except US1 where the PLl was &gt; 3 indicating severe heavy metal pollution at this site. All the pollution indices have then been utilized for building maps using the IDW method of interpolation. The spatial projection of PLI and ecological risk index (Er) values suggest that the northern part of Raebareli has a high pollution load and ecological risk in terms of heavy metal pollution. This study provide valuable information that policymakers could use to develop an appropriate plan to control pollution within the agricultural sector.

A baseline study of microplastic pollution in a Southern Indian Estuary

Knowledge on the processes controlling the vertical distribution of microplastics (MPs) in estuaries is less. This research was carried out to determine the MP distribution in the surface, middle, and bottom layers of the Udyavara River Estuary in southwest India. The mean (± standard deviation) concentrations were 320.83 (± 98.30), 514.55 (± 352.16), and 755.03 (± 400.96) particles/m3, respectively. Fibres, films, and fragments dominated, and 57 % of the MPs had a size range of 0.3–1 mm, while 43 % had a size of 1–5 mm. The main polymers were high-density polyethylene and polyethylene terephthalate. A positive correlation (r = 0.421, p = 0.0205, n = 30) exists between the MPs and salinity, suggesting that the MPs are held by dense saline waters. The mean pollution load index value was 2.25 indicating severe pollution. Microplastic pollution is due to harbour, fishing, industrial activities, the effects of southwest monsoon rain, and tidal currents.