The minimum detectable difference (MDD) at various beats/min (BPM) of CT angiography (CTA) was evaluated using an oblique V-shape line gauge and poly methyl methacrylate (PMMA) phantom in this study. The customized phantom with the size of [Formula: see text][Formula: see text]cm3 was made from a 1[Formula: see text]cm-thick PMMA. The reciprocating mechanism in the phantom was run by a step motor with an eccentric gear connected to a crank rod to provide a stable harmonic motion, simulating the cardiac beats. The MDD has a unique feature in defining the quality characteristic of CT-scanned images and provides more information than simple line pair/cm in the previous studies. The derived MDD was quantified according to various BPM, and the CTA factor combination was preset following either the conventional recommendation or the optimal one. In doing so, the performance was substantiated by the Taguchi-based signal-to-noise ratio and integrated by another index, namely, figure of merit (FOM). The MDD and corresponding [Formula: see text] (dB) changed from [Formula: see text][Formula: see text]mm to [Formula: see text][Formula: see text]mm and from 16.7[Formula: see text]dB to 14.2[Formula: see text]dB, respectively, for conventional settings; while those obtained for the optimal preset changed from [Formula: see text][Formula: see text]mm to [Formula: see text][Formula: see text]mm and from 12.2 dB to 16.4 dB, respectively of CTA at 0–90 BPM. The integrated FOM values for conventional or optimal cases were 1240 and 1337, respectively. The MDD proved to be a useful technique in justifying the CTA-scanned images. For compliance with previous studies, MDD results can be converted to the line pair/cm results, but it is more informative than the quantized number of line pairs.