Unsaturated Sites Research Articles

Expanding the Scope of Aluminum Chemistry with Noninnocent Ligands.

ConspectusAluminum is the most abundant metal in the earth's crust at 8%, and it is also widely available domestically in many countries worldwide, which ensures a stable supply chain. To further the applications of aluminum (Al), such as in catalysis and electronic and energy storage materials, there has been significant interest in the synthesis and characterization of new Al coordination compounds that can support electron transfer (ET) and proton transfer (PT) chemistry. This has been achieved using redox and chemically noninnocent ligands (NILs) combined with the highly stable M(III) oxidation state of Al and in some cases the heavier group 13 ions, Ga and In.When ligands participate in redox chemistry or facilitate the breaking or making of new bonds, they are often termed redox or chemically noninnocent, respectively. Al(III) in particular supports rich ligand-based redox chemistry because it is so redox inert and will support the ligand across many charge and protonation states without entering into the reaction chemistry. To a lesser extent, we have reported on the heavier group 13 elements Ga and In, and this chemistry will also be included in this Account, where available.This Account is arranged into two technical sections, which are (1) Structures of Al-NIL complexes and (2) Reactivity of Al-NIL complexes. Highlights of the research work include reversible redox chemistry that has been enabled by ligand design to shut down radical coupling pathways and to prevent loss of H2 from unsaturated ligand sites. These reversible redox properties have in turn enabled the characterization of Class III electron delocalization through Al when two NIL are bound to the Al(III) in different charge states. Characterization of the metalloaromatic character of square planar Al and Ga complexes has been achieved, and characterization of the delocalized electronic structures has provided a model within which to understand and predict the ET and PT chemistry of the NIL group 13 compounds. The capacity of Al-NIL complexes to perform ET and PT has been employed in reactions that use ET or PT reactivity only or in reactions where coupled ET/PT affords hydride transfer chemistry. As an example, ligand-based PT reactions initiate metal-ligand cooperative bond activation pathways for catalysis: this includes acceptorless dehydrogenation of formic acid and anilines and transfer hydrogenation chemistry. In a complementary approach, ligand based ET/PT chemistry has been used in the study of dihydropyridinate (DHP-) chemistry where it was shown that N-coordination of group 13 ions lowers kinetic barriers to DHP- formation. Taken together, the discussion presented herein illustrates that the NIL chemistry of Al(III), and also of Ga(III) and In(III) holds promise for further developments in catalysis and energy storage.

Accelerated Dynamic Reconstruction in Metal-Organic Frameworks with Ligand Defects for Selective Electrooxidation of Amines to Azos Coupling with Hydrogen Production.

Electrosynthesis coupled hydrogen production (ESHP) mostly involves catalyst reconstruction in aqueous phase, but accurately identifying and controlling the process is still a challenge. Herein, we modulated the electronic structure and exposed unsaturated sites of metal-organic frameworks (MOFs) via ligand defect to promote the reconstruction of catalyst for azo electrosynthesis (ESA) coupled with hydrogen production overall reaction. The monolayer Ni-MOFs achieved 89.8 % Faraday efficiency and 90.8 % selectivity for the electrooxidation of 1-methyl-1H-pyrazol-3-amine (Pyr-NH2) to azo, and an 18.5-fold increase in H2 production compared to overall water splitting. Operando X-ray absorption fine spectroscopy (XAFS) and various in situ spectroscopy confirm that the ligand defect promotes the potential dependent dynamic reconstruction of Ni(OH)2 and NiOOH, and the reabsorption of ligand significantly lowers the energy barrier of rate-determining step (*Pyr-NH to *Pyr-N). This work provides theoretical guidance for modulation of electrocatalyst reconstruction to achieve highly selective ESHP.

Accelerated Dynamic Reconstruction in Metal–Organic Frameworks with Ligand Defects for Selective Electrooxidation of Amines to Azos Coupling with Hydrogen Production

AbstractElectrosynthesis coupled hydrogen production (ESHP) mostly involves catalyst reconstruction in aqueous phase, but accurately identifying and controlling the process is still a challenge. Herein, we modulated the electronic structure and exposed unsaturated sites of metal–organic frameworks (MOFs) via ligand defect to promote the reconstruction of catalyst for azo electrosynthesis (ESA) coupled with hydrogen production overall reaction. The monolayer Ni‐MOFs achieved 89.8 % Faraday efficiency and 90.8 % selectivity for the electrooxidation of 1‐methyl‐1H‐pyrazol‐3‐amine (Pyr−NH2) to azo, and an 18.5‐fold increase in H2 production compared to overall water splitting. Operando X‐ray absorption fine spectroscopy (XAFS) and various in situ spectroscopy confirm that the ligand defect promotes the potential dependent dynamic reconstruction of Ni(OH)2 and NiOOH, and the reabsorption of ligand significantly lowers the energy barrier of rate‐determining step (*Pyr−NH to *Pyr−N). This work provides theoretical guidance for modulation of electrocatalyst reconstruction to achieve highly selective ESHP.

ErFeO3/α-Fe2O3 nanocomposites derived from MIL-100(Fe) for acetone sensing

Acetone, a flammable and volatile liquid, is toxic and can affect human well-being. Additionally, its presence in exhaled air can indicate the state of human respiratory health. Therefore, the investigation of an acetone gas sensor holds significant urgency in the realm of scientific research. Metal-organic frameworks (MOFs) exhibit significant promise in the field of gas detection due to their extensive surface areas, remarkable porosity, and the inclusion of unsaturated metallic sites. The study conducted the preparation of ErFeO3/α-Fe2O3 nanocomposites through impregnation and oxidation roasting methods. EF21 (MEr(NO3)3∙6H2O:MMIL-100(Fe) = 2:1) exhibited a large surface area of 43.7 m2/g and a high abundant oxygen vacancy of 12.5 %. Gas sensing experiments revealed that the EF21-based gas sensor exhibited a strong response of 55 towards 100 ppm acetone, with a low detection limit of 2 ppm (S = 3.3). Notably, the sensor demonstrated excellent selectivity towards acetone over other volatile organic compounds (e.g., ethanol, methanol, ammonia, ether, and toluene) in gas selectivity tests. Moreover, the EF21-based gas sensor maintained its responsiveness to acetone even under high relative humidity conditions (RH:90 %, S = 27) and demonstrated stability over a 15-day long-term test. The study provided a comprehensive explanation of the gas sensing mechanism responsible for the enhanced performance observed in ErFeO3/α-Fe2O3 through detailed analyses.

Amorphous metal-organic frameworks loaded on BiVO4 photoanodes with unique internal metal-like structure for promoting photoelectrochemical water splitting

Although ferrocene (Fc) based Metal-Organic Frameworks (MOFs) can act as oxygen evolution co-catalysts (OECs) for improvement of catalytic reactivity, the poor conductivity and lack of highly active metal sites limit its further application in photoelectrochemical (PEC) water splitting. Herein, the amorphous NiFc-MOF was grafted on BiVO4 photoanode (BiVO4@aNiFc-MOFs) for efficient PEC water splitting. This novel BiVO4@aNiFc-MOFs exhibits high current density of 4.34 mA cm−2 at 1.23 VRHE and relative low onset potential of 0.223 VRHE. The subsequent characterizations demonstrate that Ni species with metal-like state in bulk of aNiFc-MOFs form strong metal-support interaction with BiVO4, thereby promoting the interfacial charge transfer. Moreover, the surface of aNiFc-MOFs is short-range ordered with abundant coordinatively unsaturated Ni sites, creating a more favorable pathway for oxygen evolution reaction from thermodynamics. This work provides a simple method to design photoanodes with efficient OECs of amorphous MOFs for feasible PEC water splitting application.

A Unique Amorphous Porous BiSbOx Nanotube with Abundant Unsaturated Sb‐Stabilized BiO8−x Sites for Efficient CO2 Electroreduction in a Wide Potential Window

AbstractThe CO2 electroreduction reaction using sustainable electricity emerges as a viable strategy to produce high‐value‐added and profitable chemicals. The achievement of superior activity at a lower overpotential and higher selectivity in a wide potential window is vitally important for large‐scale industrial applications. Herein, a carbon‐composite amorphous porous BiSbOx nanotube with abundant unsaturated sites is reported to boost the conversion of CO2 to formate, exhibiting a formate selectivity of >90% in an extremely broad range of potentials from −0.5 to −1.4 V versus reversible hydrogen electrode (RHE) and a maximal energy conversion efficiency of 77.1%. Importantly, pure formic acid solution is directly obtained in a solid‐electrolyte cell for industrial‐scale applications. The porous tubular structure can expose more catalytic active sites, accelerate the mass transfer, and show fast surface charge transfer. Moreover, the unique coordination‐unsaturated Sb‐stabilized BiO8−x site can not only enhance the adsorption and activation of CO2 but also reasonably balance the stabilization and hydrogenation of *OCHO intermediate, thus leading to its obviously higher catalytic performance. As a result, a novel amorphous porous BiSbOx nanotube is successfully designed for efficient CO2 electroreduction, which may shed new light on developing many more amorphous composite metal oxide catalysts for conversion of inert small molecules.

Regulated Dual Defects of Bridging Organic and Terminal Inorganic Ligands in Iron-based Metal-Organic Framework Nodes for Efficient Photocatalytic Ammonia Synthesis.

Engineering advantageous defects to construct well-defined active sites in catalysts is promising but challenging to achieve efficient photocatalytic NH3 synthesis from N2 and H2O due to the chemical inertness of N2 molecule. Here, we report defective Fe-based metal-organic framework (MOF) photocatalysts via a non-thermal plasma-assisted synthesis strategy, where their NH3 production capability is synergistically regulated by two types of defects, namely, bridging organic ligands and terminal inorganic ligands (OH- and H2O). Specially, the optimized MIL-100(Fe) catalysts, where there are only terminal inorganic ligand defects and coexistence of dual defects, exhibit the respective 1.7- and 7.7-fold activity enhancement comparable to the pristine catalyst under visible light irradiation. As revealed by experimental and theoretical calculation results, the dual defects in the catalyst induce the formation of abundant and highly accessible coordinatively unsaturated Fe active sites and synergistically optimize their geometric and electronic structures, which favors the injection of more d-orbital electrons in Fe sites into the N2 π* antibonding orbital to achieve N2 activation and the formation of a key intermediate *NNH in the reaction. This work provides a guidance on the rational design and accurate construction of porous catalysts with precise defective structures for high-performance activation of catalytic molecules.

Regulated Dual Defects of Bridging Organic and Terminal Inorganic Ligands in Iron‐based Metal‐Organic Framework Nodes for Efficient Photocatalytic Ammonia Synthesis

AbstractEngineering advantageous defects to construct well‐defined active sites in catalysts is promising but challenging to achieve efficient photocatalytic NH3 synthesis from N2 and H2O due to the chemical inertness of N2 molecule. Here, we report defective Fe‐based metal‐organic framework (MOF) photocatalysts via a non‐thermal plasma‐assisted synthesis strategy, where their NH3 production capability is synergistically regulated by two types of defects, namely, bridging organic ligands and terminal inorganic ligands (OH− and H2O). Specially, the optimized MIL‐100(Fe) catalysts, where there are only terminal inorganic ligand defects and coexistence of dual defects, exhibit the respective 1.7‐ and 7.7‐fold activity enhancement comparable to the pristine catalyst under visible light irradiation. As revealed by experimental and theoretical calculation results, the dual defects in the catalyst induce the formation of abundant and highly accessible coordinatively unsaturated Fe active sites and synergistically optimize their geometric and electronic structures, which favors the injection of more d‐orbital electrons in Fe sites into the N2 π* antibonding orbital to achieve N2 activation and the formation of a key intermediate *NNH in the reaction. This work provides a guidance on the rational design and accurate construction of porous catalysts with precise defective structures for high‐performance activation of catalytic molecules.

Cobalt-induced localized electronic reconstruction and global band structure adjustment enhance photo-Fenton-like activity in iron-based metal–organic frameworks

Modulations in interatomic localized electron density and occupation states are vital for facilitating efficient Photo-Fenton-like reactions in iron-based metal–organic frameworks (Fe-MOFs). Here, Co-doped Fe-MOFs (FeCox-MOFs) were synthesized through a one-step hydrothermal method, introducing Co(II) with a distinct Jahn-Teller effect and electronegativity. This led to local ligand deficiency, forming exposed Fe-O-Co clusters. This integration facilitated Co coordinatively unsaturated sites (CUSs) to partially acquire electrons from adjacent Fe CUSs, further optimizing the d-band center. As a result, the d-band centers of both Fe (-1.32 eV) and Co (-1.52 eV) CUSs in FeCo2/1-MOFs were higher than that of Fe sites (-1.87 eV) in Fe-MOFs, resulting in enhanced adsorption capability of persulfate (PMS). Notably, Co(II) underwent ligand-driven electron redistribution, populating antibonding orbitals (eg*) and increasing their energy, thereby elevating the conduction band. Concurrently, Co 3d orbitals served as donor energy levels, narrowing the band gap. With the tuned band structure, the eg* of Fe(III) sites experienced rapid electron population upon photoexcitation, expediting Co(III) reduction and enhancing PMS activation. This study provides a unique perspective on the catalytic application of FeCox-MOFs in photo-Fenton-like reactions.

Insights into sulfur and hydrogen sulfide induced corrosion of sintered nanocopper paste: A combined experimental and ab initio study

The power semiconductor joining technology through sintering of copper nanoparticles is well-suited for die attachment in wide bandgap (WBG) semiconductors, offering high electrical, thermal, and mechanical performances. However, sintered nanocopper will be prone to degradation resulting from corrosion in sulfur-containing corrosive environments such as offshore areas. In this study, experiments, including aging test and corrosion characterization, and simulations based on density functional theory (DFT) studies were conducted to explore the corrosion behavior and mechanism of elemental sulfur (S8) and hydrogen sulfide (H2S) on sintered nanocopper. The experimental results indicated that loose corrosion products were observed on the sintered nanocopper during the ageing process involving S8, and compact layered corrosion products formed during the ageing process involving H2S. Furthermore, similar corrosion product compositions (Cu2O, Cu2S, CuO, CuS, and potentially Cu2SO4 or CuSO4) were observed in both the S8- and H2S-ageing processes. However, the S8-ageing process exhibited more noticeable corrosion penetration. This was explained in simulations results: the unsaturated Cu sites on the oxide layer [Cu2O(111)] of the sintered nanocopper could adsorb both H2S and S8, while the saturated Cu sites only exhibited the potential to adsorb S8.

Fe doping strategy induces peroxymonosulfate activation by ZIF-67 through a non-radical reaction pathway with dominant 1O2 generation

Zeolitic Imidazole Framework-67 (ZIF-67), which can be large-scale synthesized under mild conditions, has been widely reported as a promising and efficient catalyst in peroxymonosulfate (PMS)-based advanced oxidation process. However, ZIF-67 typically activates PMS through a monotonous free radical reaction pathway, which limits its reusability, resistance to environmental interference, and degradation selectivity. In this study, controlled doping of Fe atoms into the lattice structure of ZIF-67 (FexCo1-x-ZIF) was employed, resulting in the nearly complete conversion of PMS to 1O2 through a unique non-radical pathway. Series of experiments, characterizations, and theoretical calculations were employed to elucidate the micro-level mechanism of PMS activation. The results indicate that the tetrahedral coordinated Co-N4 sites in ZIF-67 are transformed into unsaturated Co-N2 sites due to the competitive coordination effect upon the introduction of Fe. PMS adsorption is enhanced as both oxygen atoms bind simultaneously to the Co-N2 site, inducing the removal of a hydrogen atom from PMS and electron transfer from PMS to the Co-N2 site, thus facilitating the generation of 1O2. The 1O2-dominated non-radical degradation reaction enhances the excellent degradation performance, reusability, and environmental tolerance of the FexCo1-x-ZIF/PMS system under diverse natural water conditions, presenting significant prospects for practical applications.

The fabrication of Mn single atoms/clusters on Al2O3 for enhanced catalytic NO oxidation

The exploitation of transitional metal catalysts for high-efficient conversion of NO to NO2 still persists as an imperative issue due to the high cost of currently used Pt–based catalysts. Herein, we report a TEA-modification strategy to anchor Mn single atoms/clusters on Al2O3 (Mn/Al2O3-T) for NO oxidation. Activity tests show that Mn/Al2O3-T (T83 = 275 °C) displays a superior NO-to-NO2 capacity compared with the unmodified Mn nanoparticle on Al2O3 (Mn/Al2O3-B, T66 = 300 °C) and Pt/Al2O3 (T43 = 350 °C) counterparts. Comprehensive characterization and DFT calculations discover that the effective adjustment of TEA can promote the generation of coordination unsaturated Mn sites with elongated Mn-O bonds, which can improve the mobility of surface lattice oxygen and facilitate the activation of molecular oxygen. Additionally, reducing Mn size from nanoparticles to single atoms/clusters favors the formation of labile nitrate species and facile desorption of NO2, thereby regenerating active sites and accelerating overall NO oxidation reaction.

Optimizing the intermediates adsorbability and revealing the dynamic reconstruction of Co6Fe3S8 solid solution for bifunctional water splitting

Co9S8 has been extensively studied as a promising catalyst for water electrolysis. Doping Co9S8 with Fe improves its oxygen evolution reaction (OER) performance by regulating the catalyst self-reconfigurability and enhancing the absorption capacity of OER intermediates. However, the poor alkaline hydrogen evolution reaction (HER) properties of Co9S8 limit its application in bifunctional water splitting. Herein, we combined Fe doping and sulfur vacancy engineering to synergistically enhance the bifunctional water-splitting performance of Co9S8. The as-synthesized Co6Fe3S8 catalyst exhibited excellent OER and HER characteristics with low overpotentials of 250 and 84 mV, respectively. It also resulted in the low Tafel slopes of 135 mV dec−1 for the OER and 114 mV dec−1 for the HER. A two-electrode electrolytic cell with Co6Fe3S8 used as both the cathode and anode produced a current density of 10 mA cm−2 at a low voltage of only 1.48 V, maintaining high stability for 100 h. The results of in/ex-situ experiments indicated that the OER process induced electrochemical reconfiguration, forming CoOOH/FeOOH active species on the catalyst surface to enhance its OER performance. Density functional theory (DFT) simulations revealed that Fe doping and the presence of unsaturated coordination metal sites in Co6Fe3S8 promoted H2O and H* adsorption for the HER. The findings of this study can help develop a strategy for designing highly efficient bifunctional water splitting electrocatalysts.

Selective Phosphate Adsorption Using Topologically Regulated Binary-Defect Metal-Organic Frameworks: Essential Role of Interfacial Electron Mobility.

Metal-organic framework (MOF)-modified biochars (BC) have gained recognition as potent adsorbents for phosphate. However, essential insights into the electronic interfacial state of the MOFs remain lacking. In this study, we propose a novel topological transformation strategy to directionally regulate the interfacial electronic states of BC/MOFs composites. The optimized BC/MOFs exhibited an excellent selective phosphate adsorption capacity of 188.68 mg·g-1, coupled with rapid sorption kinetics of 6.81 mg·(g·min0.5)-1 in simulated P-laden wastewater. When challenged with real bioeffluent, such efficacy was still maintained (5 mg·L-1, 25.92 mg·g-1). This superior performance was due to the Fe(III) → Fe(II) transition, promoting electron mobility and leading to the anchoring of Mg(II) to form specific coordination unsaturated sites (Mg-CUS) for phosphate adsorption. Importantly, the simultaneous regulation of binary defects further enhances electron mobility, resulting in the formation of sp3 unequal hybrid orbitals with a stronger internal coupling capability between Mg 3s in Mg-CUS and O 2p in phosphate. Furthermore, the high electron affinity of Mg effectively promotes electron cycling, endowing BC/MOFs with a distinct self-healing capability to facilitate phosphate desorption. The outcomes of this study provide novel perspectives for electronic regulated phosphate adsorption.

Peroxydisulfate activation and versatility of defective Fe3O4@MOF-808 for enhanced carbon and phosphorus recovery from sludge anaerobic fermentation

Although being viewed as a promising technology for reclamation of carbon and phosphorus from excess sludge, anaerobic fermentation (AF) grapples with issues such as a low yield of volatile fatty acids (VFAs) and high phosphorus recovery costs. In this study, we synthesized Fe3O4@MOF-808 (FeM) with abundant defects and employed it to simultaneously enhance VFAs and phosphorus recovery during sludge anaerobic fermentation. Through pre-oxidization of sludge catalyzed by FeM-induced peroxydisulfate, the soluble organic matter increased by 2.54 times, thus providing ample substrate for VFAs production. Subsequent AF revealed a remarkable 732.73 % increase in VFAs and a 1592.95 % increase in phosphate. Factors contributing to the high VFAs yield include the non-biological catalysis of unsaturated Zr active sites in defective FeM, enhancing protein hydrolysis, and the inhibition of methanogenesis due to electron competition arising from the transformation between Fe(III) and Fe(II) under Zr influence. Remarkably, FeM exhibited an adsorption capacity of up to 92.64 % for dissolved phosphate through ligand exchange and electrostatic attractions. Furthermore, FeM demonstrated magnetic separation capability from the fermentation broth, coupled with excellent stability and reusability in both catalysis and adsorption processes.

Reaction-Driven Dynamic and Reversible Transformations of Au Single Atoms and Au-Zr Alloys on Zirconia for Efficient Acetylene Hydrochlorination.

Catalysis involving gold supported on metal oxides has undergone extensive examination. However, the nature of the catalytic site under actual reaction conditions and the role of the support continue to be vigorously debated. This study addresses these issues through experimental investigations and theoretical simulations. We explore a novel catalytic mechanism that employs dynamic single-atom catalysis for the hydrochlorination of acetylene. This catalytic mechanism occurs in defective ZrO2-supported Au-Zr single-atom alloys. Specifically, the dynamic single-atom catalysis is a result of the mobility of the gold cation, which is accelerated by Cl radicals and strongly couples with the abundant unsaturated surface sites of ZrO2 in a synergistic manner. As a result, the Au electronic structure dynamically evolves, leading to a decrease in the addition reaction energy barrier. Notably, the Au cation can detach from the Au-Zr alloy structure to catalyze the hydrochlorination of acetylene near the Zr-Ov-Zr sites and then reintegrate back into the Au-Zr alloy structure upon completion of the reaction. This study underscores the significance of dynamic active sites under reaction conditions and their pivotal role in catalysis.

Metal-Organic Frameworks Based Sensor Platforms for Rapid Detection of Contaminants in Wastewater.

Metal-organic frameworks (MOFs) are a type of multifunctional material with organic-inorganic doped metal complexes that have a lot of unsaturated metal sites and a consistent network structure. MOFs work has great performance for enhancing the mass transfer, signal, and sensitivity as well as analyte enrichment. This study highlights the recent advancements of MOFs-based sensors for pollutant detection in a water environment and summarizes the effect of various synthetic materials on the performance of MOFs-based sensors. The related challenges and optimization techniques have been discussed. Then the research results of various MOFs sensors in the detection of wastewater pollutants are analyzed. Finally, the challenges facing MOFs-based water sensor development and the outlook for future research are discussed.

Construction of 3D-graphene/NH2-MIL-125 nanohybrids via amino-ionic liquid dual-mode bonding for advanced acetaldehyde photodegradation under high humidity

The development of metal organic framework (MOF)-based π-π conjugated structures capable of effectively transforming H2O from humid air to •OH radicals for VOCs photodegradation is a significant but difficult task. Herein, an amino-ionic liquid (NH2-IL) based dual-mode bridging strategy was proposed to connect 3D-graphene with NH2-MIL-125 forming IL-3DGr/NM(Ti) nanohybrids for advanced acetaldehyde photodegradation. The rational integration of these components was responsible for: (1) maintaining π-π conjugated electron transport system; (2) generating abundant coordinatively unsaturated sites and oxygen vacancies; (3) increasing surface area of the nanohybrids. With these attributes, IL-3DGr/NM(Ti) demonstrated enhanced charge separation and transportation electrochemical impedance spectroscopy (EIS): 7-times), acetaldehyde adsorption (22 %), light absorption (bandgap: 1.51 eV). The rapid H2O adsorption and photoconversion to •OH radicals by IL-3DGr/NM(Ti) enabled it to demonstrate superior CH3CHO photodegradation rate under high humidity, surpassing many state-of-the-art photocatalysts by 9 to 187 times under static air conditions and with nearly similar catalyst dosages* (photocatalyst weight and initial acetaldehyde concentration (mg ppm−1) ratio). Interestingly, the IL-3DGr/NM(Ti) photocatalytic activity was enhanced by increasing RH% up-to 80 %. Besides, the nanohybrids demonstrated tremendous stability, with only a 3.9 % decline observed after 5 consecutive-cycles. This strategy provides new prospects to improve the compatibility of graphene/MOF materials for futuristic photoelectrical applications under high humidity.

Microstructural analysis of the cast and melt-spun high entropy noble alloy Ag20Pd20Pt20Cu20Ni20

Abstract High entropy alloys (HEA) represent a relatively new class of materials with promising properties for various applications. In recent years, these alloys have received considerable attention as potential heterogeneous catalysts in chemical and electrochemical reactions. Their enhanced catalytic activity is controlled by chemical composition, surface atomic coordination, electronic configuration and degree of microstructural metastability. Single-phase HEAs are of particular importance, because they possess a uniform microstructure that is useful for designing and prediction of mechanical and potential functional properties. The cooling rate has a significant impact on the formation of the microstructure, affecting the size of grains, as well as distribution and composition of precipitates and phases that are being formed during solidification. The influence of different cooling rates on the microstructure of the alloy Ag20Pd20Pt20Cu20Ni20 was studied in our research work. The microstructure and phase constituents were characterised by Scanning Electron Microscopy and X-ray Diffraction. Liquid phase separation with a consequential monotectic reaction resulted in an anomalous multiphase cast microstructure. With an increase in the cooling rate using the melt spinning technique, the number of formed phases and the size of the grains decreased and the high entropy supersaturated solid solution was attained, as the atoms in the alloy did not have enough time to diffuse and to rearrange themselves into a stable, ordered structure. It was also confirmed that higher cooling rates cause severe lattice distortion and create coordinatively unsaturated sites at the surface which are essential for the bonding and activation of the reactants and therefore improve the potential catalytic properties of the Ag20Pd20Pt20Cu20Ni20 alloy significantly.

Synergistic effect between CoSx and MoS2 at the micrometer scale: Considerable promotion of the hydrodesulfurization of DBT

The future implementation of ultralow sulfur fuel regulations requires researchers to have an excellent understanding of the mechanism of the synergistic effect between the Co(Ni) and (Mo)W sulfides in supported Co(Ni)Mo(W)S hydrodesulfurization (HDS) catalysts. This synergistic effect occurs when the distance between two metals is on the mm or nm scale. To investigate the promotion of HDS on the µm scale, a series of Co and Mo multilayer flake catalysts with a thickness of 1 mm were prepared by laminate molding. The distance between CoSx and MoS2 in these specially structured catalysts was adjustable on the µm scale by controlling the order and quality of the catalyst powder. The results for the HDS of dibenzothiophene (DBT) demonstrate that there is an obvious synergistic effect between CoSx and MoS2 on the µm scale. The results of pyridine IR spectroscopy indicate that this synergy is due to CoSx and MoS2 synergistically generating more coordinatively unsaturated sites (CUSs) and -SH active sites at the μm scale, thus increasing the HDS activity. Moreover, the catalyst activity increases as the distance between CoSx and MoS2 decreases, and the fact that the feed comes into contact with CoSx first greatly improves the activity.