Uniform Particle Size Research Articles

Antifungal Activity of ZnO Nanoparticles Synthesized from Eichhornia crassipes Extract for Construction Applications.

Fungal growth on construction materials in tropical climates can degrade aesthetics and manifestations on modern and historical sick buildings, affecting the health of their inhabitants. This study synthesized ZnO nanoparticles with enhanced antifungal properties using a precipitation method. Different concentrations (25%, 50%, and 100%) of Eichhornia crassipes aqueous extract were used with Zn(NO3)2·6H2O as the precursor to evaluate their spectroscopic, morphological, textural, and antifungal properties. X-ray diffraction confirmed the hexagonal wurtzite phase of ZnO with crystallite sizes up to 20 nm. Fourier-transform infrared spectroscopy identified absorption bands at 426, 503, and 567 cm-1 for ZnO-100, ZnO-50, and ZnO-25, respectively. Nitrogen physisorption indicated a type II isotherm with macropores and a fractal dimension coefficient near 2 across all concentrations. Polydispersity index analysis showed that ZnO-50 had a higher PDI, indicating a broader size distribution, while ZnO-25 and ZnO-100 exhibited lower PDI values, reflecting uniform and monodisperse particle sizes. FESEM observations revealed semi-spherical ZnO morphologies prone to agglomeration, particularly in ZnO-25. Antifungal tests highlighted ZnO-25 as the most effective, especially against Phoma sp. with an MFC/MIC ratio of 78 µg/mL. Poisoned plate assays demonstrated over 50% inhibition at 312 µg/mL for all tested fungi, outperforming commercial antifungals. The results indicate that ZnO NPs synthesized using E. crassipes extract effectively inhibit fungal growth on construction materials. This procedure offers a practical approach to improving the durability of building aesthetics and may contribute to reducing the health risks associated with exposure to fungal compounds.

Study on the mechanism of controlling the morphology of basic magnesium carbonate prepared under different hydration conditions

Basic magnesium carbonate is gaining prominence in flame retardant materials due to its excellent flame-retardant properties and clean decomposition products. This study investigates a hydration-carbonation method to address challenges related to the preparation, morphology control, and stability of magnesium basic carbonate. The impact of hydration conditions on the morphology of the carbonate was analyzed using scanning electron microscopy (SEM) and X-ray diffraction (XRD). The results indicate that spherical magnesium basic carbonate with regular morphology and uniform particle size can be achieved at a hydration temperature of 50°C for 1.5 hours. However, extending the hydration time and increasing the temperature resulted in irregular morphologies. Molecular dynamics simulations using the CASTEP and Forcite modules of Materials Studio were employed to understand the influence of hydration-carbonation conditions on the carbonate's morphology. The simulations revealed that the (1 1 1) and (2 0 0) crystal faces of MgO, with higher surface energies, promote the formation of precursor magnesium hydroxide nuclei, leading to heterogeneous magnesium alkali carbonate at elevated temperatures. Prolonged hydration time resulted in fragmented carbonate structures. To control the morphology of magnesium alkali carbonate, it is essential to optimize hydration temperature and duration. The simulation results corroborate experimental findings, providing deeper insights into the liquid-gas-solid adsorption relationships during the carbonation process. This study offers valuable guidelines for the controlled synthesis of magnesium basic carbonate, enhancing its applicability in flame retardant materials.

A fibrous Ir-doped NiFeOx on two-dimensional materials for high efficiency oxygen evolution reaction (OER)

As a clean and renewable energy, hydrogen gas can be generated from water electrolysis which also involves the sluggish oxygen evolution reaction (OER). The main commercial catalysts for OER are Ir and Ru based but have the problems of high cost and poor cycling stability. Herein, we designed a new electrocatalyst based on Ni, Fe and Ir compounds loaded on a unique two-dimensional carbon material, which can efficiently catalyze OER with high stability in alkaline solution. The composite was prepared by physical vapor deposition, showing a fibrous microscopic morphology with uniform particle size distribution. The fibrous structure ensured the exposure of active sites, which further improved OER activity. The loading of metallic iridium in the material is only 0.0858 mg cm−2. The catalytic activity of OER was maintained for 54 h under alkaline conditions at a current density of 50 mA cm−2 without significant changes in current density. Characterization showed that the excellent activity and stability of the catalysts originated from the Ir insertion into the NiFe2O4 lattice.

Research on compressive strength and thermal conductivity of lightweight phosphogypsum-based composite cementitious materials

Investigation of the mechanical and thermal properties of lightweight phosphogypsum-based cementitious materials can enhance the utilization rate of phosphogypsum-based composites and reduce building energy consumption. In this study, various amounts of hollow glass microspheres (HGMs) are incorporated into phosphogypsum-based composite cementitious materials to investigate their effects on mechanical and thermal insulation properties. Subsequently, comparisons are made between lightweight phosphogypsum-based composite cementitious materials produced by foaming and those with added HGMs. The research findings indicate that HGMs significantly mitigate the loss of compressive strength and notably reduce thermal conductivity, aligning with the development needs of lightweight and high-strength construction materials. Specifically, at a 20 % HGM dosage, the specimen exhibits a thermal conductivity of 0.2512 W·m−1·K−1, marking a 46.0 % decrease compared to specimens without HGMs. Additionally, the compressive strength measures at 25.45 MPa, reflecting a 36.4 % decline relative to specimens without HGMs. However, because of the uncontrolled pore structure and size in lightweight phosphogypsum-based composite cementitious materials produced by direct foaming, the decrease in compressive strength of foamed materials is greater than that of materials with added HGMs when the reduction in the coefficient of thermal conductivity is the same. Moreover, the compressive strength of phosphogypsum-based composite cementitious materials made with HGMs decreases more than that made with the addition of HGMs. This can be attributed to the uniform particle size of HGMs, contributing to a singular and complete pore structure within the phosphogypsum-based cementitious materials, thereby optimizing their performance.

Development and Characterization of the Shale Stratum Well Wall Stabilized with Nanosomal Sealing Agent.

The development of micro cracks in shale formations can easily lead to wellbore instability caused by liquid phase invasion. In order to effectively seal the shale micropores, the surface treatment of nano-SiO2 particles was developed using the silicane coupling agent A-1891. Then, the temperature-sensitive polypenic acrylamide polymer was modified onto the surface of the nanoprocal particle through reaction to obtain the nanosomal blocking agent ASN. The infrared spectrum shows that there are chemical bonds between the generated polymer chains, rather than simple physical composites, indicating the successful synthesis of the temperature-responsive nanosealing agent ASN. The particle size analysis showed that the synthesized nanoparticles in ASN have a uniform particle size distribution and display no agglomeration phenomenon. Applying ASN as a sealing agent in drilling fluid effectively fills the nanoscale micropores and microcracks in shale, making shale denser and significantly improving the wellbore stability of shale formations. In addition, it has good temperature resistance, can adapt to reservoirs at different temperatures, is non-toxic and environmentally friendly, and has good prospects for stable applications in shale formation wellbore.

One-Step Preparation of Magnetic Lipid Bubbles: Magnetothermal Effect Induces the Simultaneous Formation of Gas Nuclei and Self-Assembly of Phospholipids.

In recent years, enveloped micro-nanobubbles have garnered significant attention in research due to their commendable stability, biocompatibility, and other notable properties. Currently, the preparation methods of enveloped micro-nanobubbles have limitations such as complicated preparation process, large bubble size, wide distribution range, low yield, etc. There exists an urgent demand to devise a simple and efficient method for the preparation of enveloped micro-nanobubbles, ensuring both high concentration and a uniform particle size distribution. Magnetic lipid bubbles (MLBs) are a multifunctional type of enveloped micro-nanobubble combining magnetic nanoparticles with lipid-coated bubbles. In this study, MLBs are prepared simply and efficiently by a magneto internal heat bubble generation process based on the interfacial self-assembly of iron oxide nanoparticles induced by the thermogenic effect in an alternating magnetic field. The mean hydrodynamic diameter of the MLBs obtained was 384.9 ± 8.5 nm, with a polydispersity index (PDI) of 0.248 ± 0.021, a zeta potential of -30.5 ± 1.0 mV, and a concentration of (7.92 ± 0.46) × 109 bubbles/mL. Electron microscopy results show that the MLBs have a regular spherical stable core-shell structure. The superparamagnetic iron oxide nanoparticles (SPIONs) and phospholipid layers adsorbed around the spherical gas nuclei of the MLBs, leading the particles to demonstrate commendable superparamagnetic and magnetic properties. In addition, the effects of process parameters on the morphology of MLBs, including phospholipid concentration, phospholipid proportiona, current intensity, magnetothermal time, and SPION concentration, were investigated and discussed to achieve controlled preparation of MLBs. In vitro imaging results reveal that the higher the concentration of MLBs loaded with iron oxide nanoparticles, the better the in vitro ultrasound (US) imaging and magnetic resonance imaging (MRI) results. This study proves that the magneto internal heat bubble generation process is a simple and efficient technique for preparing MLBs with high concentration, regular structure, and commendable properties. These findings lay a robust foundation for the mass production and application of enveloped micro-nanobubbles, particularly in biomedical fields and other related domains.

Radiation synthesis and characterization of pH-Responsive sodium Alginate/Poly(acrylic acid) nanogel loaded with ferulic acid for anticancer drug delivery

This study focuses on the synthesis and characterization of a pH-responsive nanogel system composed of sodium alginate (NaAlg) and poly(acrylic acid) loaded with ferulic acid. The mechanism of nanogel formation by gamma irradiation was elucidated, highlighting the role of polymer interactions and crosslinking agents. The pHdependent release of ferulic acid from the nanogel carrier was investigated, revealing a controlled release behavior in response to pH variations. The zeta potential values remained slightly negative across the pH range, indicating the presence of surface functional groups. Transmission electron microscopy confirmed the nanogel's formation and uniform particle size at pH 1. This nanogel was considered for controlled drug delivery applications, exhibiting high physical and chemical stability of ferulic acid. Our nanogel compound 5 decreased IC50 against HepG2, A549, MCF-7 and HCT-116 by 58.22 %, 78.35 %, 45.81 %, and 47.94 % respectively. Additionally, it decreased IC50 against VEGFR2 and EGFRT790 M by 41.94 %, and 70.59 % respectively.

Insights into the roles of heat‐stable protein derived from egg white in vitamin A stabilisation

SummaryVitamin A (VA) is a fat‐soluble compound that is essential for physiological functions including vision, fetal growth, immune response, cell differentiation and proliferation. However, its susceptibility to environmental conditions leading to poor stability limits its application in food. This study investigated the interaction between egg white protein (EWP) and VA by spectroscopy and molecular docking. The results indicated one EWP could bind 16.00 ± 0.89 VA molecules and the binding constant is (2.59 ± 0.71) × 105 m−1. What's more, there was a fluorescence resonance energy transfer between EWP and VA, and the Förster radius is 5.28 nm. In addition, VA enhanced the hydrophobic interactions with the EWP, resulting in protein aggregation, larger average particle size and more uniform particle size distribution. Finally, the combination of VA with EWP could significantly improve the photothermal stability and storage stability of VA. These studies indicate that EWP nanocomplexes can be used as ideal delivery carriers for bioactive substances.

Numerical Simulation Study of a Pusher Feed Classifier Based on RNG-DPM Method

The classifier is an essential tool for the development of contemporary engineering technology. The application of classifiers is to categorize mixed-sized particles into multi-stage uniform particle sizes. In current studies, the particles in the classifier obtain their initial velocity when feeding. The classification effect is impacted by the inability to precisely control the initial state of the particles. To solve this problem, a pusher feed classifier was designed in this study, and a numerical simulation was performed to investigate its flow field characteristics and classification performance using the RNG-DPM method. A pusher is utilized to achieve particle feeding without initial velocity and to precisely control the initial state of the particles in the classification flow field. A newly developed two-way air inlet structure is designed to provide a superimposed flow field and enable the five-stage classification. Our results show that this pusher feed classifier has the best classification effect when the vertical airflow velocity is 10 m/s and the horizontal airflow velocity is 3 m/s. Meanwhile, the classification size ratio (CSR) from outlet 1 to outlet 5 was 1.24, 0.55, 0.45, 0.39, and 0.15, respectively.

Experimental study of synthesis of N-2-Hydroxypropyltrimethylammonium chloride chitosan and carboxymethyl chitosan nanoparticles by ultrasonic microreactor

Abstract To overcome the technical limitations of current batch reactors for synthesizing N-2-HACC/CMCS NPs, an ultrasonic microreactor was designed and fabricated to continuously prepare N-2-HACC/CMCS NPs, which were characterized by SEM, laser particle sizing instrument, and FTIR. The findings indicate that the granular size of the NPs can be precisely regulated by changing the conditions of reaction temperature, ultrasonic power, reactant flux ratio, and reactant concentration. Compared with the batch reactor, ultrasonic microreactors can continuously prepare NPs with smaller and more uniform particle sizes.

Synthesis of nano-calcium carbonate from waste cement and techno-economic and environmental evaluation

Mineral carbonation stands out not only as an effective method for reducing CO2 emissions but also as a strategic approach to upcycling industrial waste. This study introduces a novel procedure for generating high-purity nano-calcium carbonate (nCaCO3) from waste cement powder, deploying hydrochloric acid (HCl), and sodium hydroxide (NaOH), both obtained through the electrolysis of sodium chloride (NaCl). Our approach, aimed at both environmental preservation and techno-economic feasibility, encompasses optimizing calcium extraction conditions through rigorous analysis of variables such as HCl concentration, solid-to-liquid ratio, and reaction temperature, subsequently proposing a rate law for the extraction process. Furthermore, the method emphasizes the production of high-purity CaCO3 by meticulously removing metallic impurities from the extracted solution with 1.0 M NaOH, culminating in pure calcium hydroxide and the generation of nCaCO3 particles with superior purity (>99 %) and a uniform particle size (80–140 nm). An exhaustive environmental and economic assessment indicates that our process, while consuming varying energy levels based on operational potentials, anticipates a significant reduction in CO2 emissions by 46.1 %, alongside a competitive production cost (335 USD/ton of nCaCO3), thereby demonstrating substantial advantages over traditional methods in terms of sustainability, efficiency, and cost-effectiveness.

Modeling on rapid prediction and cause diagnosis of boiler combustion efficiency

Presently, a method for determining pulverized coal burnout rate (PCBR) was developed on kinetics combustion model. Proposed method can promptly track influence of air coal ratio (ACR), boiler load, uniformity index (UI), coal powder fineness (CPF), particle size, and air powder mixing uniformity (PMUC) on PCBR. Moreover, developed method with fewer computations, time-saving, simplicity and low-cost can be exploited to diagnose decreasing causation of combustion efficiency.Results indicate, for anthracite and lean coal, ACR should be maintained near optimal value with 9.39–11.59 kg/kg to achieve consummate combustion efficiency. Correspondingly, higher and appropriate ACR with 10.87–12.0 kg/kg and 7.18–7.94 kg/kg should be maintained for bituminous coal and lignite. 0.1 UI improving achieves 0.18 % upgrading in PCBR. PCBR is more sensitive to UI variation above 75 % BMCR. More significant effect is presented for lean coal and lignite with changing PMUC especially below 50 % BMCR. Basically 0.1 PMUC improving achieves 0.55 enhancement in PCBR below 50 % BMCR. Concurrently 0.7 increment is delivered for anthracite and lean coal. Coal with high volatile content causes larger particle sizes of coal powder to burn out at furnace outlet. Investigation result can predict potential financial savings from unburnt carbon (UC) reduction.

Bio-synthesis, purification and structural analysis of Cyclosporine-A produced by Tolypocladium inflatum with valorization of agro-industrial wastes

Cyclosporine A (CyA) holds significant importance as a strategic immunosuppressive drug for organ transplant patients. In this study, we aimed to produce pure and cost-effective Cyclosporine A (CyA) by fermenting a culture medium containing dairy sludge, using Tolypocladium inflatum PTCC 5253. Following the fermentation stage, ethyl acetate extraction and fast protein liquid chromatography were employed for sample purification. The initial evaluation of the effectiveness of CyA obtained from these processes was performed through bioassay, wherein the antimicrobial clear zone diameter was found to be larger compared to the sample obtained from the fermentation culture. The concentration of CyA was determined using high-performance liquid chromatography, yielding values of 334 mg/L, 456 mg/L, and 578 mg/L for the fermented, extracted, and purified samples, respectively. Further analysis utilizing liquid chromatography tandem mass spectrometry (LC/MS/MS) confirmed a purity of 91.9% and proper agreement with the standard sample based on the ion intensity of Z/m 1205. To validate the structure of CyA, nuclear magnetic resonance spectroscopy, Fourier-transform infrared (FT-IR), and Raman spectroscopy were employed. X-ray diffraction and differential scanning calorimetry analyses demonstrated that the purified CyA exhibited a crystal structure similar to the standard sample, characterized by two broad peaks at 2θ = 9° and 20°, and comparable glass transition temperatures (57–68 °C for the purified sample; 53–64 °C for the standard sample). Dynamic light scattering analysis confirmed a uniform particle size distribution in both the purified and standard samples. The zeta potentials of the purified and standard samples were determined to be − 25.8 ± 0.16 and − 23.63 ± 0.12 mV, respectively. Our results demonstrate that dairy sludge can serve as a suitable culture medium for the production of (CyA).

Chiral resolution of ketoprofen by modified polymethyl methacrylate microspheres

AbstractDue to unique structural characteristics and chiral environment, β‐cyclodextrin (β‐CD) has a strong chiral separation ability. 4‐Chlorophenyl isocyanate (4CPI) also plays an important role in separating chiral drugs. In this paper, a chiral stationary phase: 4‐CPI‐β‐CD stationary phase (4CPI‐β‐CD@PMMA) was designed and prepared. Polymethyl methacrylate (PMMA) microspheres with uniform particle size and good monodispersity were prepared by modified seed polymerization and seed expansion methods. Using diazo resin as a coupling agent, PMMA microspheres were connected with 4CPI‐β‐CD to prepare a stationary phase with chiral recognition ability. PMMA microspheres and 4CPI‐β‐CD were also characterized. Compared with the traditional silica gel column, PMMA microspheres have higher preparation efficiency, better monodispersity, and better mechanical properties as chromatographic fillers. Finally, the chiral separation of ketoprofen was carried out by reversed‐phase high‐performance liquid chromatography, and the separation conditions were optimized. This paper is a good idea for the preparation of the chiral stationary phase.

A SU6668 pure nanoparticle-based eyedrops: toward its high drug Accumulation and Long-time treatment for corneal neovascularization.

Corneal neovascularization (CNV) is one of the common blinding factors worldwide, leading to reduced vision or even blindness. However, current treatments such as surgical intervention and anti-VEGF agent therapy still have some shortcomings or evoke some adverse effects. Recently, SU6668, an inhibitor targeting angiogenic tyrosine kinases, has demonstrated growth inhibition of neovascularization. But the hydrophobicity and low ocular bioavailability limit its application in cornea. Hereby, we proposed the preparation of SU6668 pure nanoparticles (NanoSU6668; size ~135nm) using a super-stable pure-nanomedicine formulation technology (SPFT), which possessed uniform particle size and excellent aqueous dispersion at 1mg/mL. Furthermore, mesenchymal stem cell membrane vesicle (MSCm) was coated on the surface of NanoSU6668, and then conjugated with TAT cell penetrating peptide, preparing multifunctional TAT-MSCm@NanoSU6668 (T-MNS). The T-MNS at a concentration of 200µg/mL was treated for CNV via eye drops, and accumulated in blood vessels with a high targeting performance, resulting in elimination of blood vessels and recovery of cornea transparency after 4 days of treatment. Meanwhile, drug safety test confirmed that T-MNS did not cause any damage to cornea, retina and other eye tissues. In conclusion, the T-MNS eye drop had the potential to treat CNV effectively and safely in a low dosing frequency, which broke new ground for CNV theranostics.

Structural, physicochemical and digestive properties of non-covalent and covalent complexes of ultrasound treated soybean protein isolate with soybean isoflavone

The non-covalent and covalent complexes of ultrasound treated soybean protein isolate (SPI) and soybean isoflavone (SI) were prepared, and the structure, physicochemical properties and in vitro digestion characteristics of SPI-SI complexes were investigated. Ultrasonic treatment increased the non-covalent and covalent binding degree of SPI with SI, and the 240 W ultrasonic covalent complexes had higher binding efficiency. Appropriate ultrasonic treatment caused more uniform particle size distribution, lower average particle size and higher surface charge, which enhanced the free sulfhydryl groups and surface hydrophobicity, thus improving the stability, solubility and emulsifying properties of complexes. Ultrasonic treatment resulted in more disordered secondary structure, tighter tertiary conformation, higher thermal stability and stronger SPI-SI covalent interactions of complexes. These structural modifications of particles had important effects on the chemical stability and gastrointestinal digestion fate of SI. The ultrasonic covalent complexation had a greater resistance to heat-induced chemical degradation of SI and improved its chemical stability. Furthermore, the 240 W ultrasonic covalent complexes showed lower protein digestibility during digestion, and provided stronger protection for SI, which improved the digestion stability and antioxidant activity. Therefore, appropriate ultrasound promoted SPI-SI interactions to improve the stability and functional properties of complexes, which provided a theoretical basis for the development of new complexes and their applications in functional foods.

Co-delivery of doxorubicin-dihydroartemisinin prodrug/TEPP-46 nano-liposomes for improving antitumor and decreasing cardiotoxicity in B16-F10 tumor-bearing mice

In order to reduce the cardiotoxicity of doxorubicin (DOX) and improve its antitumor effect, dihydroartemisinin (DHA) and DOX prodrug (DOX-S-DHA) synthesized via a single sulfur bond was used with TEPP-46 to prepare nano-liposomes (DOX-S-DHA@TEPP-46 Lips). In which, TEPP-46 was expected to exert p53 bidirectional regulation to promote the synergistic antitumor effect of DOX and DHA while reducing cardiotoxicity. DOX-S-DHA@TEPP-46 Lips exhibited uniform particle size, good stability, and excellent redox-responsive activity. DOX-S-DHA@TEPP-46 Lips could significantly inhibit the proliferation of tumor cells, but had less cytotoxicity on normal cells. The presence of TEPP-46 increased the content of p53 protein, which further induced tumor cell apoptosis. DOX-S-DHA@TEPP-46 Lips had satisfactory long circulation to enhance the antitumor efficacy and reversed the cardiotoxicity of DOX in B16-F10 tumor-bearing mice. In conclusion, DOX-S-DHA@TEPP-46 Lips provides a new insight on creating sophisticated redox-sensitive nano-liposomes for cancer therapy as well as the decreased cardiotoxicity of DOX.

Alkali-assisted extraction, characterization and encapsulation functionality of enzymatic hydrolysis-resistant prolamin from distilled spirit spent grain

Curcumin is a natural lipophilic polyphenol that exhibits significant various biological properties such as antioxidant and anti-inflammatory properties following oral administration. However, its uses have shown limitations concerning aqueous solubility, bioavailability and biodegradability that could be improved by prolamin-based nanoparticle. In this study, curcumin was encapsulated into prolamin from sorghum (SOP) and wheat (WHP) and distilled spirit spent grain (DSSGP), which was obtained after microbial proteolysis of the former two cereal grains. All the three prolamins showed clear variation of protein profiles and microstructure as confirmed by electrophoresis analysis, disulfide bond determination and Fourier-transform infrared spectroscopy (FTIR). For curcumin-loaded nanospheres (NPs) fabrication, three prolamin-based NPs shared features of spherical shape, uniform particle size, and smooth surface. The average size ranged from 122 to 193 nm depending on the prolamin variety and curcumin loading. In the experiments in vitro, curcumin showed significantly improved UV/thermal stability. Furthermore, DSSGP was more resistant to enzymatic digestion in vitro, hence achieving the controlled release of curcumin in gastrointestinal tract. Collectively, the results indicated the improved bioavailability and biodegradability of curcumin encapsulated by DSSGP, which would be an innovative potential encapsulant for effective protection and targeted delivery of hydrophobic compounds.

Defect Engineering for SnO2 Improves NO2 Gas Sensitivity by Plasma Spraying.

Large emissions of nitrogen dioxide (NO2) pose a significant threat to human health, Monitoring its content and implementing timely measures are crucial. Utilizing oxide semiconductors, such as tin dioxide (SnO2), has proven to be an effective way to detect and analyze NO2. The design and preparation of sensing materials with high sensitivity and excellent selectivity is the key to improve the detection efficiency. SnO2 nanopowders with small and uniform particle size, large specific surface area, adjustable defect content, and no impurities were prepared by a new plasma spraying method. The SnO2 nanopowders exhibit outstanding performance in detecting NO2 at a low temperature of 100 °C, the response to 5 ppm of NO2 reaches 48, and the material demonstrates rapid response and recovery times, coupled with excellent selectivity. The exceptional gas-sensitive properties can be attributed to the superior morphology and structure of SnO2. It provides more reaction sites for gas sensitive reactions, fast electron transport, a large number of charge carriers, and improved adsorption of the material to the target gas. This study provides valuable insights into nanomaterial preparation and the enhancement of gas-sensitive properties for SnO2.

Composite Hydrogel with Oleic Acid-Grafted Mesoporous Silica Nanoparticles for Enhanced Topical Delivery of Doxorubicin.

Mesoporous silica nanoparticles (MSNs) are inorganic nanocarriers presenting versatile properties and the possibility to deliver drug molecules via different routes of application. Their modification with lipids could diminish the burst release profile for water-soluble molecules. In the case of oleic acid (OA) as a lipid component, an improvement in skin penetration can be expected. Therefore, in the present study, aminopropyl-functionalized MSNs were modified with oleic acid through carbodiimide chemistry and were subsequently incorporated into a semisolid hydrogel for dermal delivery. Doxorubicin served as a model drug. The FT-IR and XRD analysis as well as the ninhydrin reaction showed the successful preparation of the proposed nanocarrier with a uniform particle size (352-449 nm) and negative zeta potential. Transmission electron microscopy was applied to evaluate any possible changes in morphology. High encapsulation efficiency (97.6 ± 1.8%) was achieved together with a sustained release profile over 48 h. The composite hydrogels containing the OA-modified nanoparticles were characterized by excellent physiochemical properties (pH of 6.9; occlusion factor of 53.9; spreadability of factor 2.87 and viscosity of 1486 Pa·s) for dermal application. The in vitro permeation study showed 2.35 fold improvement compared with the hydrogel containing free drug. In vitro cell studies showed that loading in OA-modified nanoparticles significantly improved doxorubicin's cytotoxic effects toward epidermoid carcinoma cells (A431). All of the results suggest that the prepared composite hydrogel has potential for dermal delivery of doxorubicin in the treatment of skin cancer.