Undesired Isomer Research Articles

Propranolol chiral analysis using voltammetric sensor based on triterpenoid-graphene oxide hybrid material

Enantioselective sensors are potentially in demand at all stages of the production, storage and use of drugs, including identifying impurities of undesirable isomers and improving stereoselective synthesis methods. A key aspect for enantioselective sensors design is the development of appropriate molecular architectures that make it possible to create recognition sites with different affinities for enantiomers. This experimental work proposes a new chiral sensor based on glassy carbon electrode (GCE) modified by graphene oxide (GO) covalent functionalized with pentacyclic triterpenoid betulonic acid (BetA) for voltammetric recognition and determination of propranolol (Prop) enantiomers. Characterization of the materials was carried out using FTIR spectroscopy, scanning electron microscopy and cyclic voltammetry. Differential pulse voltammetry was used for Prop enantiomers recognition and quantification. The potential difference reached 30 mV along with enanitoselectivity coefficient ipS/ipR equal to 1.30. The calculated binding energy for S-Prop/GO-BetA complex is higher by 4.801 kcal moll−1 compared to R-Prop/GO-BetA indicating a more favorable mutual arrangement of molecules. The linear determination range was established as 5.0 × 10-6 ∼ 1.0 × 10-4 mol·L-1 and 1.0 × 10-4 ∼ 4.0 × 10-4 mol·L-1 for both enantiomers. The detection limits were determined to be 3.9⋅10-7 mol·L-1 and 5.0⋅10-7 mol·L-1 for S-Prop and R-Prop, respectively. The standard spike-recovery tests were carried out in human biological fluids with recoveries 97.3 % − 106.9 % for both enantiomers. The proposed sensor was used to determine the ratio of Prop enantiomers in mixture by regression analysis with projection to latent structures (PLS). The purpose was to build a PLS-model based on a calibration set containing a known number of Prop enantiomers and recognize a test set prepared independently. All samples of test set are correctly identified and the RSD did not exceed 8.7 %. GCE modified by covalent functionalized GO with BetA showed better stability compared with noncovalent functionalization in terms of electrode degradation.

Improved synthesis of 6-bromo-7-[11C]methylpurine for clinical use

BackgroundMultidrug resistance-associated protein 1 (MRP1), an energy-dependent efflux pump, is expressed widely in various tissues and contributes to many physiological and pathophysiological processes. 6-Bromo-7-[11C]methylpurine ([11C]7m6BP) is expected to be useful for the assessment of MRP1 activity in the human brain and lungs. However, the radiochemical yield (RCY) in the synthesis of [11C]7m6BP was low, limiting its clinical application, because the methylation of the precursor with [11C]CH3I provided primarily the undesired isomer, 6-bromo-9-[11C]methylpurine ([11C]9m6BP). To increase the RCY of [11C]7m6BP, we investigated conditions for improving the [11C]7m6BP/[11C]9m6BP selectivity of the methylation reaction.Results[11C]7m6BP was manually synthesized via the methylation of 6-bromopurine with [11C]CH3I in various solvents and at different temperatures in the presence of potassium carbonate for 5 min. Several less polar solvents, including tetrahydrofuran (THF), 2-methyltetrahydrofuran (2-MeTHF), and ethyl acetate (AcOEt) improved the [11C]7m6BP/[11C]9m6BP selectivity from 1:1 to 2:1, compared with the conventionally used solvents for the alkylation of 6-halopurines, acetone, acetonitrile, and N,N-dimethylformamide. However, a higher temperature (140 °C or 180 °C) was needed to progress the 11C-methylation in the less polar solvents, and the manual conditions could not be directly translated to an automated synthesis. [11C]Methyl triflate ([11C]CH3OTf) was thus used as a methylating agent to increase the conversion at a lower temperature. The 11C-methylation using [11C]CH3OTf at 100 °C proceeded efficiently in THF, 2-MeTHF, and AcOEt with maintenance of the improved selectivity. Starting from 28 to 34 GBq [11C]CO2, [11C]7m6BP was produced with 2.3–2.6 GBq for THF, 2.7–3.3 GBq for AcOEt, and 2.8–3.9 GBq for 2-MeTHF at approximately 30 min after the end of bombardment (n = 3 per solvent). The isolated RCYs (decay corrected) for THF, 2-MeTHF, and AcOEt were 24–28%, 29–35%, and 22–31% (n = 3), respectively.ConclusionsThe use of THF, 2-MeTHF, and AcOEt improved the [11C]7m6BP/[11C]9m6BP selectivity in the methylation reaction, and the improved method provided [11C]7m6BP with sufficient radioactivity for clinical use.

Hierarchical LTL Zeolite as an Efficient and Sustainable Solid Acid Catalyst for Replacing HCl in the Production of Polyurethane Intermediates.

In many industrially important reactions, caustic mineral acid catalysts have been successfully replaced with green solid acids such as zeolites. In this context, extensive efforts have been devoted to replacing HCl to produce methylenedianiline (MDA), a key intermediate in polyurethane production. Unfortunately, limited success has been achieved thus far due to low activity, selectivity towards the desired 4,4'-MDA, and rapid catalyst deactivation. Here we report that meso-/microporous hierarchical LTL zeolite exhibits unprecedentedly high activity, selectivity, and stability. The one-dimensional cage-like micropores of LTL promote the bimolecular reaction between two para-aminobenzylaniline intermediates to selectively produce 4,4'-MDA and inhibit the formation of undesired isomers and heavy oligomers. Meanwhile, the secondary mesopores alleviate mass transfer limitations, resulting in a 7.8-fold higher MDA formation rate compared to solely microporous LTL zeolite. Due to suppressed oligomer formation and fast mass transfer, the catalyst exhibits inappreciable deactivation in an industrially relevant continuous flow reactor.

Hierarchical LTL Zeolite as an Efficient and Sustainable Solid Acid Catalyst for Replacing HCl in the Production of Polyurethane Intermediates

AbstractIn many industrially important reactions, caustic mineral acid catalysts have been successfully replaced with green solid acids such as zeolites. In this context, extensive efforts have been devoted to replacing HCl to produce methylenedianiline (MDA), a key intermediate in polyurethane production. Unfortunately, limited success has been achieved thus far due to low activity, selectivity towards the desired 4,4′‐MDA, and rapid catalyst deactivation. Here we report that meso‐/microporous hierarchical LTL zeolite exhibits unprecedentedly high activity, selectivity, and stability. The one‐dimensional cage‐like micropores of LTL promote the bimolecular reaction between two para‐aminobenzylaniline intermediates to selectively produce 4,4′‐MDA and inhibit the formation of undesired isomers and heavy oligomers. Meanwhile, the secondary mesopores alleviate mass transfer limitations, resulting in a 7.8‐fold higher MDA formation rate compared to solely microporous LTL zeolite. Due to suppressed oligomer formation and fast mass transfer, the catalyst exhibits inappreciable deactivation in an industrially relevant continuous flow reactor.

Chiral separation and molecular modeling study of decursinol and its derivatives using polysaccharide-based chiral stationary phases

Plant-based bioactive substances have long been used to treat inflammatory ailments, owing to their low toxicity and cost-effectiveness. To enhance plant treatment by eliminating undesirable isomers, optimizing the chiral separation techniques in pharmaceutical and clinical studies is important. This study reported a simple and effective method for chiral separation of decursinol and its derivatives, which are pyranocoumarin compounds with anti-cancer and anti-inflammatory properties. Baseline separation (Rs >1.5) was achieved using five different polysaccharide-based chiral stationary phases (CSPs) that differed in chiral origin, chiral selector chemistry, and preparation technique. To separate all six enantiomers simultaneously, n-hexane and three alcohol modifiers (ethanol, isopropanol, and n-butanol) were used as mobile phases in the normal-phase mode. The chiral separation ability of each column with various mobile phase compositions was compared and discussed. As a result, amylose-based CSPs with linear alcohol modifiers demonstrated superior resolution. Three cases of elution order reversal caused by modifications of CSPs and alcohol modifiers were observed and thoroughly analyzed. To elucidate the chiral recognition mechanism and enantiomeric elution order (EEO) reversal phenomenon, detailed molecular docking simulations were conducted. The R- and S-enantiomers of decursinol, epoxide, and CGK012 exhibited binding energies of –6.6, –6.3, –6.2, –6.3, –7.3, and –7.5 kcal/mol, respectively. The magnitude of the difference in binding energies was consistent with the elution order and enantioselectivity (α) of the analytes. The molecular simulation results demonstrated that hydrogen bonds, π–π interactions, and hydrophobic interactions have a significant impact on chiral recognition mechanisms. Overall, this study presented a novel and logical approach of optimizing chiral separation techniques in the pharmaceutical and clinical industries. Our findings could be further applied for screening and optimizing enantiomeric separation.

Simultaneous quantification of (E) and (Z) isomers of rilpivirine and four degradation products in bulk and tablets by reversed-phase ultra-high-performance liquid chromatography and confirmation of all by molecular weight.

The (E)-isomer of rilpivirine is an approved antiretroviral drug used to treat human immunodeficiency virus. A simple, fast, accurate, and precise analytical method is required to confirm the quality, purity, efficacy, and safety of drug substances and drug products containing rilpivirine. This research article offers a comprehensive ultra-high performance liquid chromatography method for the simultaneous separation and quantification of (E) and (Z) isomers of rilpivirine, including two amide impurities, one nitrile impurity, and one dimer impurity, in both bulk and tablet forms. After complete validation, the proposed reversed-phase ultra-high-performance liquid chromatography method has proven to be simple, fast, linear, accurate, and precise, with a lower limit of quantification and detection of 0.05 and 0.03μg/ml, respectively, for all six analytes. Separation was achieved on a Waters Acquity ethylene bridged hybrid Shield RP18 (150×2.1mm, 1.7μm) column maintained at 35.0°C using a gradient elution of acetonitrile and 0.05% formic acid in 10mM ammonium formate at a flow rate of 0.30ml/min. A systematic forced degradation study on the undissolved rilpivirine revealed the formation of acid-base hydrolyzed amide impurities (Impurity-A and Impurity-B), oxidative nitrile impurities (Impurity-C), and Z-isomer and dimer impurities of rilpivirine (Impurity-D and Impurity-E) due to alkaline hydrolysis and photodegradation. The proposed method is primarily appropriate for applications requiring the precise determination of desired and undesired isomers of rilpivirine and its degradation products, such as those involving the safety, efficacy, and quality roles of rilpivirine in bulk and tablet forms. Additionally, the proposed ultra-high-performance liquid chromatography method in combination with a mass spectrometer and photo-diode array detector is helpful for the confirmation and correct identification of all analytes.

Synthesis of natural polyprenols for the production of biological prenylquinones and tocochromanols.

We elaborate the chemical synthesis of polyprenols by chain lengthening, which is considerably less time-consuming than the other previously described methods. Our method eliminates critical steps requiring low temperature and toxic chemicals, which are difficult to perform in ordinary laboratories. The critical step of acetylene addition in liquid ammonia was replaced by a new approach, namely, the use of sodium acetylide in dimethoxyethane at room temperature, where the reaction is completed within one hour. This method is of general significance as it can also be applied to the synthesis of any other acetylides. Our method provides reasonable yields and can be scaled depending on the requirements. All the reactions were followed by high-performance liquid chromatography, allowing the formation of undesired isomers and other side-products to be controlled. The resulting polyprenols were further used in the synthesis of plastoquinones, although a variety of biological prenylquinones can be synthesized this way. Moreover, we found a new method for the direct formation of tocochromanols (plastochromanols, tocochromanols) from polyprenols and aromatic head groups.

Process for (S)-Ketamine and (S)-Norketamine via Resolution Combined with Racemization.

A concise, recyclable, and efficient process is presented for the preparation of (S)-ketamine (esketamine, (S)-1a) via classic resolution combined with the recycling of the undesired isomer. With commercially available ketone 2 as the starting material, this procedure features three steps including (1) an unique hydroxylation-ring expansion rearrangement, (2) mild amination via methanesulfonate, and (3) chiral separation using L-(+)-tartaric acid. The three simple steps are all performed in mild conditions and (S)-1a tartrate is obtained in 99.5% ee without recrystallization. Subsequently, racemization of the unwanted (R)-1a remained in resolution mother liquor was performed in the presence of a Lewis acid in quantitative yield with >99.0% chemical purity. This original and economical process afforded esketamine in 67.4% (28.9% without racemization) overall yield with two times recycling of the mother liquor without column purification. In addition, this procedure can also be applied to the preparation of (S)-norketamine, which is a safer potential antidepressant.

Rapid and efficient chiral method development for lamivudine and tenofovir disoproxil fumarate fixed dose combination using ultra-high performance supercritical fluid chromatography: A design of experiment approach

Fixed dose combination (FDC) of tenofovir disoproxil fumarate (TDF) and lamivudine (3TC) is one of the most preferred FDC for the treatment of acquired immunodeficiency syndrome (AIDS)/human immunodeficiency virus (HIV) infection. To the best of authors’ knowledge there are no reported methods for chiral purity estimation of both drugs simultaneously from a FDC. The current study was focused on the development of a single chiral method uisng supercritical fluid chromatography (SFC) for separation of stereoisomers of TDF and 3TC combination employing design of experiment (DoE) approach. Method development was planned in three steps by using different experimental designs for each step. I-optimal, Taguchi orthogonal array and face-centred central composite designs (CCD) were employed for primary parameter selection, secondary parameter screening and final method optimization, respectively. All six stereoisomers were separated in a 10 minute run on Chiralpak IA column with carbon di-oxide /methanol (containing 0.5 % v/v n-butylamine) as mobile phase at 1.5 mL/min in gradient mode. The optimized method was verified for performance through establishing specificity, precision, linearity, accuracy, limit of quantification, and solution stability. Resolution between each isomeric pair was more than 1.5. The method was found to be linear from 1.5 µg/mL to 7.5 µg/mL for 3TC and 7.5 µg/mL to 37.5 µg/mL for TDF stereoisomers. The R2 values for all the linearity curves for undesired isomers were greater than 0.995. The method proved to be rapid, reproducible and efficient to quantify stereoisomers of both drugs in a single run.

The role of cations in regulating reaction pathways driven by Bacillus circulans β-galactosidase

A β-galactosidase (EC 3.2.1.23) from Bacillus circulans (Biolacta FN5) can catalyse transgalactosylation reactions with lactose as a donor. In addition to their function as cofactors and structural stabilisers in biocatalytic reactions, cations can play a role in salt-bridge interactions and electrostatic charge screening of proteins. In this work, we investigated the impact of calcium, magnesium, sodium and potassium, commonly found in dairy whey systems, on the transgalactosylation kinetics of the β-galactosidase from Bacillus circulans. Both molecular modeling and quantitative experimental methods were used to assess enzyme aggregation and resulting loss in enzyme activity that is initiated by high concentrations of these cations. The effect of this loss in activity with time was studied during the transgalactosylation of N-acetylglucosamine (GlcNAc) to N-acetyllactosamine (LacNAc) using lactose as the donor. No significant change in hydrolysis or transgalactosylation reaction kinetics was observed at low concentrations of divalent cations (Ca2+ or Mg2+) or up to 100 mM of monovalent cations (Na+ or K+). The enzymatic yield and selectivity, however, were significantly affected at concentrations of 100 mM of Ca2+ or Mg2+. These changes were the result of both the loss in enzyme activity and a reduction in the reaction rate constant for hydrolysis and formation of the undesired isomer, Allo-LacNAc. In particular, addition of magnesium enhanced the selectivity for LacNAc over Allo-LacNAc, with no significant reduction in the LacNAc yield. These findings suggest that cations can be employed to regulate the action of β-galactosidase during transgalactosylation through the formation of protein aggregates.

Process Research and Impurity Control Strategy of Esketamine

An improved synthesis of (S)-ketamine (esketamine) has been developed, which was cost-effective, and the undesired isomer could be recovered by racemization. Critical process parameters of each step were identified as well as the process-related impurities. The formation mechanisms and control strategies of most impurities were first discussed. Moreover, the (S)-ketamine tartrate is a dihydrate, which was disclosed for the first time. The practicable racemization catalyzed by aluminum chloride was carried out in quantitative yield with 99% purity. The ICH-grade quality (S)-ketamine hydrochloride was obtained in 51.1% overall yield (14.0% without racemization) by chiral resolution with three times recycling of the mother liquors. The robust process of esketamine could be industrially scalable.

The First Asymmetric Pilot-Scale Synthesis of TV-45070

TV-45070 is a small-molecule lactam containing a chiral spiro-ether that has been reported as a potential topical therapy for pain associated with the Nav1.7 sodium ion channel encoded by the gene SCN9A. A pilot-scale synthesis is presented that is highlighted by an asymmetric aldol coupling at ambient temperature, used to create a quaternary chiral center. Although only a moderate ee is obtained, the removal of the undesired isomer is achieved through preferential precipitation of a near racemic mixture from the reaction, leaving the enantiopure isomer in solution. Cyclization to form the final API uses an uncommon diphenylphosphine-based leaving group which proved successful on the neopentyl system when other traditional leaving groups failed.

Analysis of dye degradation products and assessment of the dye purity in dye-sensitized solar cells

For commercialization of dye-sensitized solar cells (DSSCs), improvement of their long-term stability and efficiency is important. A key component in solar cells is the dye, its high purity and high stability. Here, methods for dye extraction and purification, and for determination of dye purity and dye degradation in DSSCs, were developed. A method was developed for extraction of the dye Z907 from intact solar cells using a water/ethanol mixture containing tetrabutylammonium hydroxide. The N719 dye synthesized in our laboratory was purified by gel filtration on Sephadex LH20. These dyes, along with the dyes N3 and RuL2 (NC)2, were analyzed using nuclear magnetic resonance (NMR) spectroscopy and liquid chromatography coupled to an electrospray ionization quadrupole-time-of-flight mass analyzer (LC/MS) operating in negative ionization mode. Purification of the synthesized N719 removed several impurities, including its undesired isomer with the thiocyanate ligand attached to ruthenium through sulfur instead of nitrogen. The dyes N719 and Z907 were successfully extracted from solar cells and together with N3 and RuL2 (NC)2 analyzed by LC/MS, although N719 isomerized almost immediately in basic aqueous solution. The [M-H](-1) ions were observed and the measured mass was within a ±6 ppm range from the exact mass. LC/MS in combination with NMR spectroscopy was shown to provide useful information on dye structure, purity, and on the efficiency of the purification methods. These methods allow for further studies of solar cell dyes, which may provide the detailed information needed for the improvement and eventual commercialization of the solar cell technology.

A Stereoselective Synthesis of a 3,4,5-Substituted Piperidine of Interest as a Selective Muscarinic (M1) Receptor Agonist

Syntheses of (1RS,2SR,6SR)-2-alkoxymethyl-, 2-hetaryl-, and 2-(hetarylmethyl)-7-arylmethyl-4,7-diaza-9-oxabicyclo[4.3.0]nonan-8-ones, of interest as potential muscarinic M1 receptor agonists, are described. A key step in the synthesis of (1RS,2SR,6SR)-7-benzyl-6-cyclobutyl-2-methoxymethyl-4,7-diaza-9-oxabicyclo[4.3.0]nonan-8-one, was the addition of isopropenylmagnesium bromide to 2-benzyloxycarbonylamino-3-tert-butyldimethylsilyloxy-2-cyclobutylpropanal. This gave the 4-tert-butyldimethylsilyloxymethyl-4-cyclobutyl-5-isopropenyloxazolidinone with the 5-isopropenyl and 4-tert-butyldimethylsilyloxymethyl groups cis-disposed about the five-membered ring by chelation controlled addition and in situ cyclisation. This reaction was useful for a range of organometallic reagents. The hydroboration–oxidation of (4SR,5RS)-3-benzyl-4-(tert-butyldimethylsilyloxymethyl)-4-cyclobutyl-5-(1-methoxyprop-2-en-2-yl)-1,3-oxazolidin-2-one gave (4SR,5RS)-3-benzyl-4-(tert-butyldimethylsilyloxymethyl)-4-cyclobutyl-5-[(SR)-1-hydroxy-3-methoxyprop-2-yl]-1,3-oxazolidin-2-one stereoselectively. 4,7-Diaza-9-oxabicyclo[4.3.0]nonan-8-ones with substituents at C2 that could facilitate C2 deprotonation were unstable with respect to oxazolidinone ring-opening and this restricted both the synthetic approach and choice of 2-heteroaryl substituent. The bicyclic system with a 2-furyl substituent at C2 was therefore identified as an important target. The addition of 1-lithio-1-(2-furyl)ethene to 2-benzyloxycarbonylamino-3-tert-butyldimethylsilyloxy-2-cyclobutylpropanal gave (4SR,5RS)-4-tert-butyldimethylsilyloxymethyl-4-cyclobutyl-5-[1-(2-furyl)ethenyl]-1,3-oxazolidinone after chelation controlled addition and in situ cyclisation. Following oxazolidinone N-benzylation, hydroboration at 35 °C, since hydroboration at 0 °C was unexpectedly selective for the undesired isomer, followed by oxidation gave a mixture of side-chain epimeric alcohols that were separated after SEM-protection and selective desilylation. Conversion of the neopentylic alcohols into the corresponding primary amines by reductive amination, was followed by N-nosylation, removal of the SEM-groups and cyclisation using a Mitsunobu reaction. Denosylation then gave the 2-furyloxazolidinonyl-fused piperidines, the (1RS,2SR,6SR)-epimer showing an allosteric agonistic effect on M1 receptors. Further studies resulted in the synthesis of other 2-substituted 4,7-diaza-9-oxabicyclo[4.3.0]nonan-8-ones and an analogous tetrahydropyran

Asymmetric synthesis of Ampelomin A and ent-Epiampelomin A.

We synthesized the naturally occurring carbasugar ampelomin A and its epimer from a common starting material. The enantiomerically pure starting material was obtained by base-catalyzed asymmetric Diels-Alder reaction of 3-hydroxy-2-pyrone and chiral acrylate. The total yield of ampelomin A was 14% in seven synthetic steps. The key step of the synthesis of ampelomin A was inversion of the stereochemistry at the C-6 position, which was achieved by stereoselective catalytic hydrogenation of the corresponding methylidene group. Further synthesis of the epimer was straightforward, because all stereogenic centers had already been introduced on the starting material; the total yield was 44% in four synthetic steps. Both the final products were obtained in pure form without contamination with undesired isomers. The reported (1)H NMR chemical shift of the C-7 methyl protons and the H-5axial coupling pattern of natural ampelomin A were inconsistent with those of our synthetic product. After careful comparison of the spectra and examination of the stable conformation obtained through MM2 calculations, we present revised NMR data for ampelomin A.

Application of PAT Tools for the Safe and Reliable Production of a Dihydro-1H-imidazole

The application of two Process Analytical Technology (PAT) tools was studied and implemented for the safe and reliable synthesis of an advanced intermediate (4S,5R-7) of a member of the dihydro-1H-imidazole (1) class of compounds. Real time data were generated using ReactIR to track the complete breakdown of phosgene precursors (2) to phosgene (3) and confirm the absence of these hazardous materials prior to batch transfer operations. In addition, the chiral resolution by crystallization of rac7 was monitored by a Lasentec FBRM probe-based system. Implementation of the latter helped to track the crystallization process to minimize the risk of cocrystallization of undesired isomer 4R,5S-7.

Efficient Synthesis and Practical Resolution of 1-(Naphthalen-1-yl)ethanamine, a Key Intermediate for Cinacalcet

An efficient synthesis of 1-(naphthalen-1-yl)ethanamine ( RS -2) and its practical resolution to optically pure (1R)-(naphthalen-1-yl)ethanamine ( R -(+)-2), a key intermediate in the synthesis of cinacalcet hydrochloride (1), is described. The resolution of RS -2 using R-(−)-mandelic acid as a resolving agent in ethanol was established on an industrial scale to give pure R -(+)-2 with >99.8% ee after liberation of the amine from its mandelate salt. An efficient process for the racemization of undesired isomer S -(−)-2 is also provided to maximize the yield of desired enantiomer.

ChemInform Abstract: Synthesis of New Penem Dithiocarbamates.

Abstract Penem dithiocarbamates, 10 were synthesized from the alcohol 6 , in high yields and favourable ratio between the penem and the undesired penam isomers. In vitro antibacterial activity showed a dependence on polarity and steric hindrance of the side chain at C-2. Best results were obtained with the piperazino derivatives 10 l–n , while catechol 10 p did not show the expected improvements in anti-pseudomonal activity.

Highly enantioselective copper-catalyzed allylic alkylation with atropos phosphoramidites bearing a D2-symmetric biphenyl backbone

A novel class of atropos dibridged biphenyl phosphoramidites bearing a D 2-symmetric biphenyl backbone was prepared and applied as chiral ligands in the copper-catalyzed allylic alkylation with Grignard reagent. The alkylation products were obtained in quantitative yields with high regioselectivities up to 94:6 of S N2′/S N2 ratio and enantiomeric excesses up to 91.1% for S N2′ products. The unique D 2-symmetric backbone ligands have the advantages of easy preparation and sufficient reusability of their key intermediates from the undesired isomers.

Recycling of undesired isomers of key intermediate for aprepitant

A protocol for regeneration of key intermediate of aprepitant from its undesired diastereomers is described. This work features the recycling of at least one-third of the undesired isomers (ent-6, 7 and ent-7) to desired isomer 4 as the key early intermediate for the synthesis of aprepitant 1. The key step in our strategy involves diastereomeric salt preparation.