Unactivated Arenes Research Articles

Directionally Aligned Crown Ethers as Superactive Organocatalysts for Transition-metal Ion-free Arylation of Unactivated Arenes.

When one-dimensionally aligned to the same side, multiple non-covalently associated crown ether groups could act as a whole to yield a higher catalytic activity than an individual poorly active crown ether group, delivering the lowest catalyst loading of 1-2 mol % among all hitherto known organocatalysts for catalyzing direct arylation of unactivated arenes with haloarenes.

Photoinduced arylation of chloroarenes in flow: synthesis of unsymmetrical biaryls.

A photoflow method is presented for a radical-based coupling of unactivated arenes and aryl chlorides. The process proceeded smoothly at ambient temperature under metal-free conditions. Of note is that the reaction conditions are fine-tuned for chloroarenes with different electronic properties. While the reactivity profile of aryl chlorides is generally known to be inferior to those of the corresponding iodides and bromides, we demonstrate that the title protocol is efficient in converting readily available and inexpensive chloroarenes into unsymmetrical biaryl products.

Palladium incorporated MIL-101(Cr): a heterogeneous and reusable catalyst for the C–H functionalization of unactivated arenes

Palladium incorporated MIL-101(Cr) as an efficient heterogeneous catalyst has been developed for the C–H functionalization of unactivated arenes.

Organocatalytic synthesis of (Het)biaryl scaffolds via photoinduced intra/intermolecular C(sp2)–H arylation by 2-pyridone derivatives

A unique N,O-bidentate ligand 6-oxo-1,6-dihydro-pyridone-2-carboxylic acid dimethylamide (L1) catalyzed direct C(sp2)-H (intra/intermolecular) arylation of unactivated arenes has been developed to expedite access to (Het)biaryl scaffolds under UV-irradiation at room temperature. The protocol tolerated diverse functional groups and substitution patterns, affording the target products in moderate to excellent yields. Mechanistic investigations were also carried out to better understand the reaction pathway. Furthermore, the synthetic applicability of this unified approach has been showcased via the construction of biologically relevant 4-quinolone, tricyclic lactam and sultam derivatives.

Enolate SNAr of unactivated arenes via [(η6-arene)RuCp]+ intermediates.

A series of complexes of the general formula [(η6-arene)RuCp][PF6] (where arene = aryl halides or nitroarenes) were synthesised and the arene ring was found to be reactive towards an intermolecular nucleophilic aromatic substitution (SNAr) reaction with a series of cyclic 1,3-diones. Competition experiments indicated that leaving group ability of the aryl halides and nitroarenes went in the order of F ≫ NO2 > Cl > Br. Following SNAr, the arene rings were liberated quantitatively via a rapid photolysis reaction (<15 min).

Arene radiofluorination enabled by photoredox-mediated halide interconversion.

Positron emission tomography (PET) is a powerful imaging technology that can visualize and measure metabolic processes in vivo and/or obtain unique information about drug candidates. The identification of new and improved molecular probes plays a critical role in PET, but its progress is somewhat limited due to the lack of efficient and simple labelling methods to modify biologically active small molecules and/or drugs. Current methods to radiofluorinate unactivated arenes are still relatively limited, especially in a simple and site-selective way. Here we disclose a method for constructing C-18F bonds through direct halide/18F conversion in electron-rich halo(hetero)arenes. [18F]F- is introduced into a broad spectrum of readily available aryl halide precursors in a site-selective manner under mild photoredox conditions. Notably, our direct 19F/18F exchange method enables rapid PET probe diversification through the preparation and evaluation of an [18F]-labelled O-methyl tyrosine library. This strategy also results in the high-yielding synthesis of the widely used PET agent L-[18F]FDOPA from a readily available L-FDOPA analogue.

Bromination of phenyl ether and other aromatics with bromoisobutyrate and dimethyl sulfoxide

Bromoisobutyrate has been used for the first time as a general brominating source for the direct bromination of a diverse of simple phenyl ethers. Aromatic ethers bearing various substituents could be compatible in this reaction system delivering brominated arenes in moderate to good yields. The reaction system can also be expanded to bromination of phenols and unactivated arene. This process can be regarded as an alternative for the well-established bromination systems for bromoarene synthesis.

Dearomatization of Unactivated Arenes via Catalytic Hydroalkylation

The dearomative cyclization of linear amides to complex spirocyclic butyrolactams has been enabled by photoredox catalysis through a reductive radical-polar crossover mechanism. This mechanism operates with precision on unactivated aromatic substrates to give a wide range of 1,4-hydroalkylation products. This method utilizes a simple organic catalyst/reductant pair to deliver products in a highly flexible manner with respect to substitution, and the products can be further functionalized under simple conditions to afford a collection of motifs. The mechanistic analysis performed here outlines the salient features of this strategy, which were applied to prepare a collection of complex scaffolds including the anticonvulsive agent gabapentin.

Regiodivergent CDC reactions of aromatic aldehydes with unactivated arenes controlled by transient directing strategy.

The regiodivergent catalytic dehydrogenative cross-coupling reactions at both sp2 and sp3 hybridized carbons of aromatic compounds are particularly challenging. Herein, we report the finding of transient directing group controlled regiodivergent C(sp3)-C(sp2) and C(sp2)-C(sp2) cross-coupling in the o-methyl benzaldehyde frameworks. Catalyzed by palladium, using K2S2O8 or [F+] reagents as by-standing oxidants and unactivated arenes as substrates/solvents, various benzyl benzaldehydes or phenyl benzaldehydes were prepared. A mechanism study indicated that the regiospecificity is dominated by the [5,6]-fused palladacycle or [6,5]-fused palladacycle intermediates, which are generated from Pd-chelation with specified transient directing groups and further C-H activations.

Selective cleavage of unactivated arene ring C-C bonds by iridium: key roles of benzylic C-H activation and metal-metal cooperativity.

The cleavage of aromatic C–C bonds is central for conversion of fossil fuels into industrial chemicals and designing novel arene functionalisations through ring opening, expansion and contraction. However, the current progress is hampered by both the lack of experimental examples of selective oxidative addition of aromatic C–C bonds and limited understanding of the factors that favour insertion into the C–C rather than the C–H bonds. Here, we describe the comprehensive mechanism of the only reported chemo- and regioselective insertion of a transition metal into a range of substituted arene rings in simple iridium(i) complexes. The experimental and computational data reveal that this ring cleavage requires both reversible scission of a benzylic C–H bond and cooperativity of two Ir centres sandwiching the arene in the product-determining intermediate. The mechanism explains the chemoselectivity and scope of this unique C–C activation in industrially important methylarenes and provides a general insight into the role of metal–metal cooperativity in the cleavage of unsaturated C–C bonds.

Direct C(sp2)\u2013H alkylation of unactivated arenes enabled by photoinduced Pd catalysis

Despite the fundamental importance of efficient and selective synthesis of widely useful alkylarenes, the direct catalytic C(sp2)–H alkylation of unactivated arenes with a readily available alkyl halide remains elusive. Here, we report the catalytic C(sp2)–H alkylation reactions of unactivated arenes with alkyl bromides via visible-light induced Pd catalysis. The reaction proceeds smoothly under mild conditions without any skeletal rearrangement of the alkyl groups. The direct syntheses of structurally diverse linear and branched alkylarenes, including the late-stage phenylation of biologically active molecules and an orthogonal one-pot sequential Pd-catalyzed C–C bond-forming reaction, are achieved with exclusive chemoselectivity and exceptional functional group tolerance. Comprehensive mechanistic investigations through a combination of experimental and computational methods reveal a distinguishable Pd(0)/Pd(I) redox catalytic cycle and the origin of the counter-intuitive reactivity differences among alkyl halides.

Palladium‐Catalyzed Direct C−H Arylation of Arenes Promoted by Quaternary Ammonium Salt

AbstractA new Pd‐based catalytic system for the direct C−H arylation of arenes was developed. The use of a substoichiometric amount of quaternary ammonium salt as an additive with a Pd source achieved the direct arylation of unactivated arenes under milder reaction conditions in moderate to high yields. The ammonium salt generates the anionic palladium complex, thereby facilitating arylation by a concerted metalation‐deprotonation process.

Rhodium-Catalyzed Arene Alkenylation Using Only Dioxygen as the Oxidant

We report the oxidative conversion of unactivated arenes and alkenes to alkenyl arenes using unpurified air or purified dioxygen as the only oxidant. This method uses RhCl3 salt as the catalyst pre...

Experiments and Direct Dynamics Simulations That Probe η2-Arene/Aryl Hydride Equilibria of Tungsten Benzene Complexes.

Key steps in the functionalization of an unactivated arene often involve its dihaptocoordination by a transition metal followed by insertion into the C-H bond. However, rarely are the η2-arene and aryl hydride species in measurable equilibrium. In this study, the benzene/phenyl hydride equilibrium is explored for the {WTp(NO)(PBu3)} (Bu = n-butyl; Tp = trispyrazoylborate) system as a function of temperature, solvent, ancillary ligand, and arene substituent. Both face-flip and ring-walk isomerizations are identified through spin-saturation exchange measurements, which both appear to operate through scission of a C-H bond. The effect of either an electron-donating or electron-withdrawing substituent is to increase the stability of both arene and aryl hydride isomers. Crystal structures, electrochemical measurements, and extensive NMR data further support these findings. Static density functional theory calculations of the benzene-to-phenyl hydride landscape suggest a single linear sequence for this transformation involving a sigma complex and oxidative cleavage transition state. Static DFT calculations also identified an η2-coordinated benzene complex in which the arene is held more loosely than in the ground state, primarily through dispersion forces. Although a single reaction pathway was identified by static calculations, quasiclassical direct dynamics simulations identified a network of several reaction pathways connecting the η2-benzene and phenyl hydride isomers, due to the relatively flat energy landscape.

Polyfunctional Conjugated Microporous Polymers for Applications in Direct C-H Arylation of Unactivated Arenes and Aqueous Adsorption of Aromatic Amines

Salen-porphyrin-based conjugated microporous polymers(CMPs) have been demonstrated to be an attractive material platform for predesigned structures and promising applications. Herein, a new salen-porphyrin-based conjugated microporous polymer(SP-CMP-L) was solvothermally prepared by porphyrin-forming condensation reaction of pyrrole and salen-dialdehyde derivative. The SP-CMP-L was characterized by spectroscopy technologies, and also exhibited excellent thermal and chemical stability. The porosity of SP-CMP-L was examined by N2 adsorption/desorption isotherms. The BET specific surface area of the CMP material was calculated to be 290.4 m2/g with the pore volume of 0.19 cm3/g. The microstructure property of the resulting material was further evaculated by scanning electron microscopy(SEM) and transmission electron microscopy(TEM). The SP-CMP-L with salen and porphyrin multidentate coordination sites was proposed to serve as an initiator to promote the cross-coupling between aryl halides with unactivated arenes under base-mediated conditions. The transition-metal-free catalytic protocol provided high catalytic activity for direct C-H arylation reaction of unactivated arenes, and thus offered a convenient and efficient alternative for the construction biaryl scaffolds. In addition, the salen-porphyrin-based CMP material possessed remarkable adsorption capability for the removal of organic amines from water.

C-F Activation for C(sp2)-C(sp3) Cross-Coupling by a Secondary Phosphine Oxide (SPO)-Nickel Complex.

A secondary phosphine oxide (SPO)-nickel catalyst allowed the activation of otherwise inert C-F bonds of unactivated arenes in terms of challenging couplings with primary and secondary alkyl Grignard reagents. The C-F activation is characterized by mild reaction conditions and high levels of branched selectivity. Electron-rich and electron-deficient arenes were suitable electrophiles for this transformation. In addition, this strategy also proved suitable to heterocycles and for the activation of C-O bonds under slightly modified conditions.

Organocatalyzed Birch Reduction Driven by Visible Light.

The Birch reduction is a powerful synthetic methodology that uses solvated electrons to convert inert arenes to 1,4-cyclohexadienes-valuable intermediates for building molecular complexity. Birch reductions traditionally employ alkali metals dissolved in ammonia to produce a solvated electron for the reduction of unactivated arenes such as benzene (Ered < -3.42 V vs SCE). Photoredox catalysts have been gaining popularity in highly reducing applications, but none have been reported to demonstrate reduction potentials powerful enough to reduce benzene. Here, we introduce benzo[ghi]perylene imides as new organic photoredox catalysts for Birch reductions performed at ambient temperature and driven by visible light from commercially available LEDs. Using low catalyst loadings (<1 mol percent), benzene and other functionalized arenes were selectively transformed to 1,4-cyclohexadienes in moderate to good yields in a completely metal-free reaction. Mechanistic studies support that this unprecedented visible-light-induced reactivity is enabled by the ability of the organic photoredox catalyst to harness the energy from two visible-light photons to affect a single, high-energy chemical transformation.

Organocatalyst in Direct C(sp2)-H Arylation of Unactivated Arenes: [1-(2-Hydroxyethyl)-piperazine]-Catalyzed Inter-/Intra-molecular C-H Bond Activation.

This article describes the identification of 1-(2-hydroxyethyl)-piperazine as a new, cost-effective, highly efficient organocatalyst, which promotes both inter- and intra-molecular direct C(sp2)-H arylations of unactivated arenes in the presence of potassium tert-butoxide. While the inter-molecular C-H arylation of unactivated benzenes with aryl halides (Ar-X; X = I, Br, Cl) toward biaryl syntheses underwent smoothly in the presence of only 10 mol % organocatalyst, the intra-molecular C-H arylation catalytic system composed of 40 mol % each of the catalyst and the additive (4-dimethylaminopyridine (DMAP)). The novel catalyst was also able to perform both inter- and intra-molecular direct arylations simultaneously in a single pot. The mechanistic studies confirmed the involvement of aryl radical anions and proceeded via a single-electron-transfer (SET) mechanism. The large substrate scope, high functional group tolerance, competition experiments, gram-scale synthesis, and kinetic studies further highlight the importance and versatile nature of the methodology as well as the compatibility of the new catalyst. To the best of our knowledge, this is the first report on any organocatalyst that reported detailed investigations of both inter- and intra-molecular direct C(sp2)-H arylations of unactivated arenes in a single representation.

Formal C-H Carboxylation of Unactivated Arenes.

A formal C−H carboxylation of unactivated arenes using CO2 in green solvents is described. The present strategy combines a sterically controlled Ir‐catalyzed C−H borylation followed by a Cu‐catalyzed carboxylation of the in situ generated organoboronates. The reaction is highly regioselective for the C−H carboxylation of 1,3‐disubstituted and 1,2,3‐trisubstituted benzenes, 1,2‐ or 1,4‐symmetrically substituted benzenes, fluorinated benzenes and different heterocycles. The developed methodology was applied to the late‐stage C−H carboxylation of commercial drugs and ligands.

Synthesis of Biaryl Ketones via Oxidative Coupling of Unactivated Arenes and Carbon Monoxide

Synthesis of Biaryl Ketones via Oxidative Coupling of Unactivated Arenes and Carbon Monoxide