Ultrathin Polymer Layers Research Articles

In vitro assessment of charcoal and resin hemoadsorbents.

An in vitro assessment has been made of the blood compatibility and efficiency of different charcoal and resin hemoadsorbents. The charcoals vary in source, shape, size, nature and amount of polymer coating. The resins are the macroreticular adsorbents XAD-4 and Y56 and a carbonized resin. The effect on Y56 of albumin coating has been studied. The assessment has demonstrated that a reduction in platelet drop is accompanied by a decrease in the adsorption of fibrinogen. The results confirm the potential advantages of spherical charcoal and that coating with an ultrathin layer of polymer or with albumin does not seriously reduce efficiency. For Y56 resin, treatment with an albumin solution of 1-2 g/100 ml appears to be a suitable procedure if clinical use is considered.

Relation between the strength of polyethylene-steel adhesion bonds and the thickness of the ultrathin layer of polymer remaining on the surface of the metal

On the basis of the principle of ellipsometry and, moreover, the method of pyrolitic decomposition of the polymer with subsequent chromatographic analysis of the products of pyrolysis, a procedure has been developed for experimentally determining the thickness of the ultrathin layer of polymer that remains on the metal after failure of a polyethylene-steel adhesion bond. The nature of the relationship between the thickness of the residual polymer layer (200–800 A) and the strength of the adhesion bond is established. It is concluded that the cohesion strength and the deformation at failure of the layer of adhesive next to the more rigid and stronger boundary layer have a decisive influence on the strength of the adhesion bond.