Metal Organic Framework UiO-66 Research Articles

Triflate-Functionalized UiO-66 Metal–Organic Framework Nanoparticles for Tandem Synthesis of Xanthones

Triflate-Functionalized UiO-66 Metal–Organic Framework Nanoparticles for Tandem Synthesis of Xanthones

Amino-Functionalizing Ce-Based MOF UiO-66 for Enhanced CO2 Adsorption and Selectivity.

Metal-organic frameworks (MOF) hold great promise for CO2 adsorption due to their high surface areas, tunable pore sizes, and the ability to modify their chemical properties to enhance CO2 affinity. MOFs tagged with functional groups either at linker or metal sites have shown improved CO2 uptake capacity and selectivity. This study focuses on investigating the potential of selective CO2 adsorption using amino functionalization of linker forming Ce-UiO-66. The physicochemical properties and characteristics of MOFs to determine the degree of amino functionalization and structural stability were examined using powder X-ray diffraction (PXRD), Fourier transformer infra-red (FTIR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and N2 porosimetry and specific surface area (BET). This work unveils a novel array of results on CO2, N2 and water vapour adsorption on Ce-UiO-66-NH2. The amino-functionalized Ce-UiO-66-NH2 shows 63 % higher CO2 uptake and 84 % higher CO2/N2 selectivity at 273 K and 1 bar over Ce-UiO-66. Ce-UiO-66-NH2 also shows excellent structural stability after gas and vapour sorption making Ce-UiO-66-NH2 potential adsorbent for CO2 capture.

UiO-66(Zr) as drug delivery system for non-steroidal anti-inflammatory drugs

The toxicity for the human body of non-steroidal anti-inflammatory drugs (NSAIDs) overdoses is a consequence of their low water solubility, high doses, and facile accessibility to the population. New drug delivery systems (DDS) are necessary to overcome the bioavailability and toxicity related to NSAIDs. In this context, UiO-66(Zr) metal-organic framework (MOF) shows high porosity, stability, and load capacity, thus being a promising DDS. However, the adsorption and release capability for different NSAIDs is scarcely described. In this work, the biocompatible UiO-66(Zr) MOF was used to study the adsorption and release conditions of ibuprofen, naproxen, and diclofenac using a theoretical and experimental approximation. DFT results showed that the MOF-drug interaction was due to an intermolecular hydrogen bond between protons of the groups in the defect sites, (μ3 − OH, and − OH2) and a lone pair of oxygen carboxyl functional group of the NSAIDs. Also, the experimental results suggest that the solvent where the drug is dissolved affects the adsorption process. The adsorption kinetics are similar between the drugs, but the maximum load capacity differs for each drug. The release kinetics assay showed a solvent dependence kinetics whose maximum liberation capacity is affected by the interaction between the drug and the material. Finally, the biological assays show that none of the systems studied are cytotoxic for HMVEC. Additionally, the wound healing assay suggests that the UiO-66(Zr) material has potential application on the wound healing process. However, further studies should be done.

Highly dispersed active sites and strong metal-support interaction for boosting CO2 hydrogenation to methanol

As global energy demand continues to increase and global climate change issues caused by greenhouse gas emissions gradually heat up, the effective conversion of carbon dioxide into high value-added methanol has become a key challenge in the energy and environmental fields. However, due to the chemical inertness of CO2 molecules, it is difficult to activate CO2 at low temperatures, resulting in extremely low conversion rates. Although increasing the reaction temperature is beneficial for the conversion of CO2, there is also competition in the reverse water gas reaction, resulting in lower methanol selectivity. Therefore, developing efficient catalysts is the key to improving CO2 conversion rate and methanol selectivity. In this work, we used zirconium-based UIO-66 metal-organic framework as a precursor, replaced the original terephthalic acid ligand with thermally unstable aminoterephthalic acid, and supported Cu on the MOF precursor by equal volume impregnation method. After heat treatment, the Cu/ZrO2-DM catalyst was prepared. The catalyst was compared with Cu/ZrO2 catalyst prepared by co-precipitation method, hydrothermal method and unmodified Cu/ZrO2-D catalyst. The Cu/ZrO2-DM catalyst exhibited the highest CO2 conversion and methanol selectivity in the hydrogenation reaction, reaching 13.95% and 90.78%, respectively. The main reason is attributed to the large specific surface area of the copper-based catalyst derived from MOF materials, the good dispersion of the active center and the strong interaction between Cu and the precursor. This work may provide a new perspective for the design and synthesis of related catalytic materials for efficient CO2 hydrogenation to methanol.

Removal of Humic Acid by UiO-66(Zr) and MIL-100(Fe) Metal-Organic Frameworks (MOFs) Adsorption

The escalating presence of humic acid (HA) in aquatic systems poses significant ecological and potable water treatment challenges, altering the color, taste, and odor of water and fueling algal blooms that deplete oxygen levels to the detriment of aquatic life. Traditional techniques like coagulation-flocculation, membrane filtration, oxidation fall short in efficiency due to its small fraction of HA. This study confronts the pervasive issue of HA contamination by leveraging the advanced properties of metal-organic frameworks (MOFs). In this work, two representative MOFs are synthesized and well characterized. Then, their capability for removal HA by adsorption process in water for HA treatment are detailed evaluated. The findings from this research extend beyond academic curiosity, offering actionable insights for water treatment facilities and environmental management agencies. The synthesis of MOFs which are UiO-66(Zr), MIL-100(Fe). Each MOFs have been applied to remove HA by adsorption under different condition. The effect of contacting time, initial pH, adsorbent dosage has been evaluated. After adsorption experiment, MOF samples prepared to dry and went through characterization. Removal of HA by MOF adsorption showed UiO-66(Zr) and MIL-100(Fe) examined rapid reaching equilibrium state with 10-15 min. Among various pH conditions, UiO-66(Zr) and MIL-100(Fe) showed the highest adsorption capacity under acidic conditions. MIL-100(Fe) achieves a higher maximum adsorption capacity than MIL-100(Fe). MOF after adsorption samples went through characterizations and their remained characteristics indicating the adsorption not affected the structure of the MOFs.

A facile and efficient voltammetric sensor for marbofloxacin detection based on zirconium-based metal-organic framework UiO-66/nitrogen-doped graphene nanocomposite

Improper and persistent use of marbofloxacin (MAR) is prone to produce residues that deteriorate the surrounding environment and endanger our health. Hence, it is urgent to stablish a facile and efficient detection technique for the detection of MAR. Herein, a highly efficient electrochemical platform was constructed for sensitive determination of MAR using zirconium-based metal–organic framework (UiO-66)/nitrogen-doped graphene (NG) nanocomposites (UiO-66/NG). The surface morphology, crystalline phase, elemental composition, and electrochemical behavior of UiO-66/NG were characterized by various spectroscopic and electrochemical techniques. Owing to the synergistic interaction of UiO-66 MOFs and NG nanosheets, the UiO-66/NG exhibited remarkable catalytic activity for MAR oxidation. As consequently, the UiO-66/NG demonstrated a wide linear response range (0.01 − 10 μM), high sensitivity (1.80 μM μA−1 cm−2) and low detection limit (0.002 μM). The proposed UiO-66/NG/GCE demonstrated robust voltammetric responses even in the presence of excess potential interfering species and retained stable response signals for at least two weeks. More importantly, the proposed UiO-66/NG/GCE displayed highly consistent sensitivity toward MAR detection in both aquaculture water and milk matrices and PBS buffer, and achieved accurate and sensitive detection of MAR with good recovery. Together with its low cost and facile operation, the UiO-66/NG/GCE shows great prospects for trace detection of MAR from complex matrices.

UiO-67 metal-organic frameworks with dual amino/iodo functionalization, and mixed Zr/Ce clusters: Highly selective and efficient photocatalyst for CO2 transformation to methanol

Metal-organic frameworks (MOFs) are promising tools for photocatalytic CO2 reduction (PCR) to produce valuable added-value products. However, existing MOFs demonstrate significantly weaker potential for PCR to MeOH compared to fuels like CO, CHOOH, and CH4. This study address this challenge by exploring a series of bifunctional UiO-67 MOFs containing NH2 and I groups with varying Ce to Zr metal node ratios (0, 10, 20, 29, and 40 % Ce). These MOFs, denoted as Zr/CeX%-UiO-67(NH2, I), were probed for their ability to convert CO2 to MeOH under solar irradiation without the need for a photosensitizer. The results demonstrate a remarkable increase in both selectivity and efficiency for MeOH production with increasing Ce content. Notably, Zr/Ce29%-UiO-67(NH2, I) achieves 100 % selectivity for MeOH production, along with MeOH productivity of 44.7 µmolh−1g−1, significantly surpassing previously reported UiO-based MOFs for PCR-to-MeOH conversion. Furthermore, this MOF exhibits exceptional CO2 uptake capacity compared to pristine UiO-67 and many established MOFs, further highlighting its catalytic efficacy. The outstanding photocatalytic performance of Zr/Ce40%-UiO-67(NH2, I) can be attributed to a synergistic combination factors: (i) the optimal incorporation of redox-active Ce metal sites, (ii) enhanced CO2 capture facilitated by the cooperative interaction of NH2 and I groups, and (iii) the introduction of amino functions that broaden the light absorption range of the MOF. This work demonstrates a successful strategy for incorporating various functionalities into MOFs, paving the way for the design of highly selective and efficient PCR catalysts for MeOH production.

A Bioinspired Copper-Pair Catalyst in Metal-Organic Frameworks for Molecular Dioxygen Activation and Aerobic Oxidative C-N Coupling.

Open Cu sites were loaded to the UiO-67 metal-organic framework (MOF) skeleton by introduction of flexible Cu-binding pyridylmethylamine (pyma) side chains to the biphenyldicarboxylate linkers. Distance between Cu centers in the MOF pores was tuned by controlling the density of metal-binding side chains. "Interacted" Cu-pair or "isolated" monomeric Cu sites were achieved with high and low (pyma)Cu side chain loading, respectively. Spectroscopic and theoretical studies indicate that "interacted" Cu pairs can effectively bind and activate molecular dioxygen to form Cu2O2 clusters, which showed high catalytic activity for aerobic oxidative C-N coupling. On the contrary, MOF catalyst bearing isolated monomeric Cu sites only showed modest catalytic activity. Enhancement in catalytic performance for the Cu-pair catalyst is attributed to the remote synergistic effect of the paired Cu site, which binds molecular dioxygen and cleaves the O═O bond in a collaborative manner. This work demonstrates that noncovalently interacted metal-pair sites can effectively activate inert small molecules and promote heterogeneous catalytic processes.

Acetone Gas Sensing with Quartz Crystal Microbalance and Adsorption Characteristics for UiO-66 Metal–Organic Frameworks

Acetone Gas Sensing with Quartz Crystal Microbalance and Adsorption Characteristics for UiO-66 Metal–Organic Frameworks

Enhancing antimicrobial efficacy: 8-Hydroxyquinoline incorporation into metal-organic frameworks with iron ion coupling

The antimicrobial properties of 8-Hydroxyquinoline (8-Hq), a small organic compound known for its metal-chelating capabilities, hold significant promise. However, its limited solubility in water poses a challenge for practical applications. In this study, we address this limitation by augmenting the antimicrobial efficacy of 8-Hq through its integration into the metal-organic framework UiO-66 (named 8-Hq@UiO-66) and coupling it with iron ions (designated as Fe/8-Hq@UiO-66) via an adsorption process. The sorption isotherm and adsorption kinetics were meticulously examined using Langmuir's adsorption model and the pseudo-second-order kinetic model. Material characterization techniques including powder X-ray powder diffraction, Fourier transform infrared spectroscopy, thermogravimetric analysis, nitrogen adsorption isotherms, ultraviolet–visible spectroscopy, and photoluminescence spectroscopy revealed the coordination of zirconium clusters and iron with the nitrogen and hydroxyl groups of 8-Hq, respectively. Furthermore, our investigation into metal ion adsorption demonstrated that the 8-Hq@UiO-66 composite displayed a notable selectivity for iron ions over other metal ions in aqueous media. Under optimized conditions, the adsorption capacity for iron ions ranged from approximately 34–46 mg g−1. Importantly, the Fe/8-Hq@UiO-66 composite exhibited potent antimicrobial activity against Bacillus subtilis, Staphylococcus aureus, and Escherichia coli. These findings underscore the potential of incorporating 8-Hq into porous metal-organic frameworks and coupling it with iron ions to enhance its antimicrobial efficacy.

Synthesis of Cr(OH)3/ZrO2@Co-based metal-organic framework from waste poly(ethylene terephthalate) for hydrogen production via formic acid dehydrogenation at low temperature

Recycling waste polyethylene terephthalate (PET) bottles into value-added ligand materials for synthesizing metal-organic frameworks (MOFs) derived catalysts is an eco-friendly and economically viable process. The waste PET bottles were readily broken down into 1,4-benzenedicarboxylic acid (BDC) ligands in a highly alkaline environment. Herein, we fabricated a Co@Cr(OH)3/ZrO2 catalyst via the carbonization of PET-derived UiO-66 metal-organic frameworks for the catalytic dehydrogenation of formic acid at low temperatures. The as-prepared Co@Cr(OH)3/ZrO2 catalyst provides a turnover frequency of 7685 h−1 for hydrogen generation (120 mL in 1.5 min) at ambient temperature. This is due to the uniform dispersion of the fine metal nanoparticle (NPs) (Co NPs, ∼3.75 nm) and the synergistic effect of the Co NPs and Cr(OH)3/ZrO2 supports. In addition, the characterization results indicate that porous Zr-MOFs may effectively enclose tiny particles, which is favorable for enhanced dehydrogenation performance. In addition, the Co@Cr(OH)3/ZrO2 catalysts demonstrated excellent stability against aggregation and were recyclable over seven cycles without any significant catalytic loss. Thus, this study provides a sustainable methodology for the development of MOF-derived, effective, and stable catalysts for formic acid dehydrogenation towards hydrogen production.

Fabrication of phosphorylated UiO-66 for efficient selective removal of Pb2+ from acidic wastewater

Metal-organic framework (MOF) materials have emerged as promising candidates for treating heavy metal wastewater because of their controllable pore size, high specific surface area, and abundant active sites. Nevertheless, the currently reported MOFs usually require near-neutral environments (pH = 5–6) to achieve efficient removal of Pb2+ and cannot be applied to acidic environments (pH = 2–3). In this work, the structurally stabilized zirconium-based MOF UiO-66 was chosen as the object of study. Three phosphate ester-based MOFs (UiO-66-(OPO3)X) containing different amounts and spatial positions were designed and prepared by simple chemical modification and used to remove Pb2+. Adsorption experiments showed that they could reach adsorption equilibrium in 30 min with excellent adsorption rate. Owing to the unique ionization ability of the phosphate ester group, UiO-66-(OPO3)X maintains a high removal efficiency of Pb2+ even at pH = 2 and pH = 3. In addition, selectivity and competition experiments demonstrated that UiO-66-(OPO3)X possessed excellent selectivity and anticompetitive ability towards Pb2+.The excellent regeneration performance demonstrates their value for practical application. Moreover, the adsorption mechanism was investigated in detail by experiment combined with density functional theory (DFT).

Phosphine-incorporated Metal-Organic Framework for Palladium Catalyzed Heck Coupling Reaction.

As an emerging material with the potential to combine the high efficiency of homogeneous catalysts and high stability and recyclability of heterogeneous catalysts, metal-organic frameworks (MOFs) have been viewed as one of the candidates to produce catalysts of the next generation. Herein, we heterogenized the highly active mono(phosphine)-Pd complex on surface of UiO-66 MOF, as a catalyst for Suzuki and Heck cross coupling reactions. The successful immobilization of these Pd-monophosphine complexes on MOF surface to form UiO-66-PPh2-Pd was characterized and confirmed via comprehensive set of analytical methods. UiO-66-PPh2-Pd showed high activity and selectivity for both Suzuki and Heck Cross Coupling Reactions. This strategy enabled facile access to mono(phosphine) complexes which are challenging to design and require multistep synthesis in homogeneous systems, paving the way for future MOF catalysts applications by similar systems.

Anionic oxyl radical formed on CrVI-oxo anchored on the defect site of the UiO-66 node facilitates methane to methanol conversion.

The direct conversion of methane to methanol has attracted increasing interest due to abundant and low-cost natural gas resources. Herein, by anchoring Cr-oxo/-oxyhydroxides on UiO-66 metal-organic frameworks, we demonstrate that reactive anionic oxyl radicals can be formed by controlling the coordination environment based on the results of density functional theory calculations. The anionic oxyl radicals produced at the completely oxidized CrVI site acted as the active species for facile methane activation. The thermodynamically stable CrVI-oxo/-oxyhydroxides with the anionic oxyl radicals catalyze the activation of the methane C-H bond through a homolytic mechanism. An analysis of the results showed that the catalytic performance of the active oxyl species correlates with the reaction energy of methane activation and H adsorption energies. Following methanol formation, N2O can regenerate the active sites on the most stable CrVI oxyhydroxides, i.e., the Cr(O)4Hf species. The present study demonstrated that the anionic oxyl radicals formed on the anchored CrVI oxyhydroxides by tuning the coordination environment enabled facile methane activation and facilitated methanol production.

UiO-66 metal-organic frameworks as aldol condensation catalyst: Impact of defects, solvent, functionality on the catalytic activity and selectivity

Defected and amine-loaded zirconium-based metal–organic frameworks (MOF) UiO-66(Zr) have been characterized and chemically assessed in a condensation reaction of acetone and 4-nitrobenzaldehyde. The present work focuses primarily on the production of the aldol adduct as the main product while minimizing the formation of the enone adduct as a side product. Four analogues with varying numbers of missing linkers in the hexanuclear secondary building units, from one to four out of a total of 12, were synthesized. Thorough characterization showed that an increased number of defects results in an enhanced acidity, a higher internal surface area, and an increased accessibility of coordinatively unsaturated Zr-sites. The catalytic performance assessment revealed that defects, to a certain extent, positively affect the selectivity towards the aldol adduct, i,e. the catalyst, which is missing 3 of the 12 linkers, exhibits the highest activity in a solvent-free environment with a turnover frequency (TOF) amounting to 8.03 10-3 s−1. This TOF value is approximately double of the catalyst with 1.4 defects, which exhibited a TOF of only 4.41 10-3 s−1. Excluding more than three linkers more likely leads to 'missing cluster defects' and causes a decrease in the reaction rate towards the aldol adduct. A reduction in overall catalytic activity was observed upon functionalization with amine groups (UiO-66-NH2). Functionalization with L-proline (UiO-66Lpr) resulted in a shift from an acid to a basic reaction mechanism which was reflected by an improved selectivity towards the aldol adduct while maintaining a reasonable overall activity level. The best performances were obtained working solvent-free or with hexane as a solvent, while polar/semi-polar solvents hindered the catalyst performance. An 18-hour stability test demonstrated the robustness of defected and functionalized UiO-66.

Facile Recycling Strategy of Dyed Polyester Waste by Template-Based Synthesis of UiO-66 for Value-Added Transformation into Self-detoxifying Fabrics.

Polyethylene terephthalate (PET) accounts for a significant portion of textile waste, and recycling strategies for this material have attracted much attention. This study proposes a facile and innovative PET recycling method applicable to environmental remediation that involves the conversion of dyed PET fabric waste into a value-added fabric. Herein, a template-based synthesis approach capable of growing a UiO-66 metal-organic framework (MOF) directly on a dyed PET fabric is reported. The advantage of this process lies in its simplicity, where the partial hydrolysis of PET followed by a zirconium chloride treatment results in the successful growth of UiO-66 on a dyed PET fabric with the concurrent removal of the dye without additional steps. The catalytic performance of the UiO-66-grown fabric was evaluated through the degradation of dimethyl 4-nitrophenyl phosphate (DMNP), a nerve agent simulant. The fabric produced by the simple metal treatment (Zr@PEThyd) exhibited excellent DMNP degradation performance with t1/2 = 43.3 min and maintained functional stability after a harsh washing procedure, an outcome attributed to the surface-assisted UiO-66 growth that ensured good bonding stability. The developed process is innovative in that it uses dyed PET waste as a template for the direct growth of UiO-66, simplifying the process without compromising the catalytic functionality. This research provides an informative option for a sustainable textile recycling strategy by transforming dyed PET waste into an advanced self-detoxifying material.

Phosphomolybdic acid regulated the defective metal-organic framework UiO-66 for electrochemical nitrogen reduction reaction

In recent years, electrochemical ammonia synthesis has been considered a green process with excellent application prospects. The nitrogen reduction process (NRR) needs more activation energy when NN bonds are broken, which decreases the ammonia yield rate and Faraday efficiency (FE) for ammonia synthesis. Herein, UiO-66-xHPMo electrocatalysts are effectively synthesized by regulating the defects of the metal-organic framework (UiO-66) using phosphomolybdic acid (HPMo) as a defect regulator. XRD, FT-IR, TEM, XPS, TPD, etc., characterized the catalysts. As a result, the reasons for the increase in NH3 yield rate (RNH3) are catalysts losing the ligand of terephthalic acid, exposing more Zr6 nodes as active sites, and providing numerous active sites for NN cleavage. However, introducing HPMo makes catalysts more alkaline and have lower charge transfer resistance, which are more inclined to adsorb H+ and enhance hydrogen evolution reaction (HER), reducing FEs. Thus, with a voltage of −0.3 V (vs. RHE) and a neutral electrolyte (0.1 mol L−1 Na2SO4), UiO-66–2HPMo has excellent NRR performance (RNH3: 36.61 μg h−1 mg−1, FE: 31.09%).

Locally controlled MOF growth on functionalized carbon nanotubes

Metal-organic frameworks (MOFs) are highly versatile materials because of their tunable properties. However, the typically poor electrical conductivity of MOFs presents challenges for their integration into electrical devices. By adding carbon nanotubes to MOF synthesis, a highly intergrown material with increased conductivity and chemiresistive sensing properties can be obtained. Here, we present a patterning technique to control MOF growth on predefined areas of one particular carbon nanotube. We found that electron beam pretreatment of -COOH functionalized multi-walled carbon nanotubes inhibits the growth of UiO-66 MOF on these multi-walled carbon nanotubes. By irradiating individual multi-walled carbon nanotubes, we show that MOF growth can be inhibited in predefined tube areas, creating MOF-free spaces on the nanotube. In this way, our method shows a possibility to pattern MOF growth on individual nanotubes.

UiO-66 metal–organic framework nanoparticles as electrocatalysis for direct sodium borohydride fuel cells

UiO-66 metal–organic framework nanoparticles as electrocatalysis for direct sodium borohydride fuel cells

Nitrogen oxide remediation through metal–organic frameworks with bi-functional absorption and photocatalytic characteristics

In the population increase and growing industrialization framework, NOx (NO and NO2) arises among the most important air pollutants responsible for various health and environmental conditions. Metal-organic frameworks, MOFs, are promising materials for NOx remediation.This study investigates the removal of nitrogen oxides (NOx) using metal–organic frameworks (MOFs). MOFs UiO-66, UiO-66-NH2, MIL-125, and MIL-125-NH2 were synthesized and characterized. The surface area of the MOFs was quantified, showing values like 1118 m2/g for UiO-66-NH2 and 1424 m2/g for MIL-125-NH2. The NOx removal efficiency using the NH2 functionalized MOFs reached 100 % efficiency under UV light. Moreover, the immobilization of MIL-125-NH2 in carrageenan/alginate matrices was investigated, maintaining significant NOx reduction capabilities ∼ 80 %. This work also emphasizes the potential of MOFs by combining adsorptive and photocatalytic properties, providing insights into NOx capture and transformation mechanisms, and proposing a viable approach for sustainable air remediation technologies. This work paves the way for the successful applications of MOFs and MOF-modified membranes for air pollution mitigation.