Ultra-high Frequency Research Articles

Gravitational wave sourced by decay of massive particle from primordial black hole evaporation

In this article, we investigate the stochastic gravitational waves (GWs) spectrum, resulting from the emission of gravitons through bremsstrahlung, in the decay of particles produced by Hawking radiation. Although particle decays inevitably entail the emission of graviton due to bremsstrahlung, the associated decay width is notably suppressed due to the Planck scale suppression in the coupling of matter fields to gravitons. Consequently, the relic abundance of such GWs constituted of these gravitons undergoes a corresponding reduction. However, we demonstrate that super-heavy particles, reaching masses as high as Planck scale, can emerge naturally in the Hawking radiation of evaporating primordial black holes (PBHs) and can compensate for this suppression. In addition, we also discuss the stochastic gravitational waves constituted out of the gravitons directly radiated from such evaporating PBHs. When the super-heavy particle decays promptly after its production, then the corresponding GW spectrum remains subdominant to the one arising from direct PBH evaporation. However, if this particle is long-lived and decays after PBH evaporation, then the resulting GWs produced in these two processes have two distinct spectra with their peaks at extremely high frequencies, providing avenues for proposed ultra-high frequency gravitational wave detectors. We also show that such gravitational waves contribute significantly to substantial dark radiation, which can be probed with the enhanced sensitivity of future experiments.

Design of a Frequency Controller System for UHF Radio Wave Receiver Device

Frequency is fundamental in data communication for transmitter and receiver stations. The most common problem found in the data communication is the signal quality measurement. A LoRa module, as one of the wireless devices with UHF (Ultra High Radio) frequencies, has extended range frequencies and signal strength parameters (RSSI, Received Signal Strength Indicator). RSSI parameter on signal bandwidth and the distance between stations. However, there is no supporting research in terms of the RSSI quality and short-distance variations. In line with this, this study aims to design a frequency control system of a LoRa module and to investigate the effect of short-distance and frequency differences on RSSI. The system consists of a transmitter, a LoRa SX1278 module, and push buttons as frequency control buttons. The system's performance was tested by receiving data over various distances from 0 to 1.25 m. The results show that the system works efficiently in controlling the frequency (ranging from 433 – 525 MHz) with good flexibility and accuracy. The system maintained an RSSI level > -120 dBm using a constant power supply and varied distances. The highest RSSI level is found at the shortest distance (0.2 m) with a higher frequency (525 MHz). There is a significant correlation between distance, frequency variations, and RSSI levels (R2 > 0.75). It can be concluded that the LoRa SX1278 module can be used as a short-distance-based data communication with moderate quality (average RSSI levels are about 80 - 120 dBm). Higher frequencies provide better RSSI levels due to increased transmission energy.

Battery-free flexible wireless temperature sensing for food storage

The method of monitoring food temperature during food storage needs to be improved to continuously and accurately perceive the temperature of the food in the package to ensure the quality and safety of the food during storage. This paper proposes and develops a battery-free flexible wireless temperature sensing system (BFTS) for food storage. The BFTS consists of a battery-free flexible wireless temperature sensing tag (BFTT), a wireless reader, and a personal computer (PC). The BFTT developed in this paper has good flexibility and can be placed inside the food package to realize the continuous monitoring of temperature changes. The flexible circuits of the BFTT were fabricated by laser engraving laser-induced graphene (LIG) −copper (Cu) plating film made with Cu plating on LIG. The LIG-Cu plating film has good thickness uniformity, electrical conductivity, and laser engraving processability. The antenna of BFTT has good performance. The wireless reader is connected to the PC using a data line, and the BFTT communicates wirelessly with the wireless reader using ultra-high frequency (UHF) radio frequency identification (RFID). The BFTT was realized by the wireless radio frequency (RF) as the supply power from the wireless reader. The BFTS could realize the temperature monitoring of food stored at 0℃ and −18℃, and it has the advantages of low cost, simple manufacturing process, and low energy consumption, which could be used to continuously and accurately monitor the inside temperature of the food packages. Overall, the LIG-Cu plating film developed in this paper could be used in the fabrication of flexible circuits, and the temperature monitoring inside food packages realized by the BFTS has potential applications in actual food storage.

Design and test of a sub-45 nm non-aligned double gate inverter in TCAD environment: static and dynamic analysis

ABSTRACT This work presents a sub-45 nm application-specific nanoscale single-device non-aligned double gate inverter (NADGI) with minimised gate and drain contacts. NADGI uses two devices of 25 nm channel length, i.e. NADGPFET and NADGNFET, giving maximum ON-current of 1.16 mA and 1.36 mA, respectively. The dynamic performance of the proposed structure was evaluated by applying ultra-high frequency, super-high frequency, and varying supply voltage/load capacitor. This work uses graphical method to determine the optimal supply voltage of the NADGI, the estimated values at 1 GHz and 10 GHz input frequency were 0.6 V and 0.7 V, respectively. When compared with the past works, the proposed inverter shows 82.4% improvement in propagation delay and 40% reduction in the supply voltage. Therefore, with improved design structure and response, the proposed inverter can be suitably used for high-frequency and low-power circuit design.

Design of a novel split-recessed-gate β-Ga2O3 MOSFET-based maximum-gain microwave amplifier

In this study, a split-recessed-gate Ga2O3 MOSFET has been proposed for high-frequency applications. Extensive simulations have been carried out using TCAD Silvaco to examine the analog characteristics as well as the critical high-frequency metrics of the proposed device. A comparison has been drawn with conventional recessed-gate β-Ga2O3 MOSFET, and it is demonstrated that the proposed device outperforms the conventional device in terms of the high-frequency metrics due to its significantly lower parasitic capacitances and higher intrinsic gain. In addition, it was also demonstrated that the proposed device exhibits a substantial increase of 127.7% in the Johnson’s figure of merit, significantly higher, i.e. 134.7% higher, than Baliga’s high-frequency figure of merit, as well as a 3.25% increase in Baliga’s figure of merit as compared to the conventional device. Furthermore, a two-port network analysis has been carried out for both the devices and it has been shown that the proposed device offers higher gain with a slight trade-off in the reflections at the input/output ports. The scattering parameters have also been extracted and used to perform the stability analysis. It was observed that the proposed device exhibits higher stability for the entire frequency range. Furthermore, a maximum gain amplifier was designed using the proposed device. An impressive gain of 11.04 dB was demonstrated at an ultra-high frequency of 3 GHz.

Performance of a UHF RFID Detection System to Assess Activity Levels and Lying Behaviour in Fattening Bulls

Animal welfare strongly influences the health and performance of cattle and is an important factor for consumer acceptance. One parameter for the quantification of health status is the lying duration, which can be deployed for the early detection of possible production-related illnesses. Usually, 3D-accelerometers are the tool to detect lying duration in cattle, but the handling of bulls sometimes has special requirements because frequent manipulation in daily farming routines is often not possible. An ultrahigh-frequency (UHF) radio-frequency identification (RFID) system was installed in a beef cattle barn in Germany to measure the activity and lying time of bulls. Such UHF RFID systems are typically used for estrus detection in dairy cows via activity level, but can also be considered, for instance, as an early detection for lameness or other diseases. The aim of the study was to determine whether the estimations of activity level and lying duration can also be traced in husbandry systems for fattening bulls. Two groups of bulls (Uckermärker cattle, n = 10 and n = 13) of the same age were equipped with passive UHF RFID ear transponders. Three cameras were installed to proof the system and to observe the behaviour of the animals (standing, lying, and moving). Furthermore, accelerometers were attached to the hind legs of the bulls to validate their activity and lying durations measured by the RFID system in the recorded area. Over a period of 20 days, position (UHF RFID) and accelerometer data were recorded. Videos were recorded over a period of five days. The UHF RFID system showed an overall specificity of 95.9%, a sensitivity of 97.05%, and an accuracy of 98.45%. However, the comparison of the RFID and accelerometer data revealed residuals (ԑ) of median lying time (in minutes per day) for each group of ԑGroup1 = 51.78 min/d (p < 0.001), ԑGroup2 = −120.63 min/d (p < 0.001), and ԑGroup1+2 = −34.43 min/d (p < 0.001). In conclusion, UHF RFID systems can provide reliable activity and lying durations in 60 min intervals, but accelerometer data are more accurate.

Classification of Partial Discharge Sources in Ultra-High Frequency Using Signal Conditioning Circuit Phase-Resolved Partial Discharges and Machine Learning

This work presents a methodology for the generation and classification of phase-resolved partial discharge (PRPD) patterns based on the use of a printed UHF monopole antenna and signal conditioning circuit to reduce hardware requirements. For this purpose, the envelope detection technique was applied. In addition, test objects such as a hydrogenerator bar, dielectric discs with internal cavities in an oil cell, a potential transformer and tip–tip electrodes immersed in oil were used to generate partial discharge (PD) signals. To detect and classify partial discharges, the standard IEC 60270 (2000) method was used as a reference. After the acquisition of conditioned UHF signals, a digital signal filtering threshold technique was used, and peaks of partial discharge envelope pulses were extracted. Feature selection techniques were used to classify the discharges and choose the best features to train machine learning algorithms, such as multilayer perceptron, support vector machine and decision tree algorithms. Accuracies greater than 84% were met, revealing the classification potential of the methodology proposed in this work.

Enhanced breakdown strength of epoxy composites by constructing dual-interface charge barriers at the micron filler/epoxy matrix interface

For the advanced energy systems with ultra-high voltage and frequency, in order to improve the thermal conductivity, arc resistance and mechanical strength of epoxy-based dielectric materials, the addition of micron inorganic fillers is necessary. However, this will inevitably degrade their breakdown strength. In this work, the example of constructing dual-interface charge barriers by optimizing molecular structure at micron filler/epoxy matrix interface to capture charge and then enhance the breakdown strength of epoxy composites is reported. Results show that the Al2O3@PVDF-6/BPA system with optimized interfacial structure exhibits the breakdown strength of AC and DC voltages of 37.5 and 67.8 kV/mm, respectively, far outperforming current epoxy composites containing micron fillers. The charge trapping effects in the dual-interface charge barriers are comprehensively investigated, which is confirmed to be the reason for the improved breakdown strength. In particular, the construction of dual-interface charge barriers hardly sacrifices the thermal and mechanical properties of epoxy composites. This work unveils a scalable approach to exploring satisfied dielectric epoxy composites by dual-interface charge barriers construction at the micron filler/epoxy matrix interface.

Femtosecond laser ablation responses of kerogen-rich, argillaceous, and bituminous shale rocks

Shale rocks have become one of the major sources of natural gas and oil. Laser drilling has emerged as a promising technique that can be incorporated into horizontal drilling and hydraulic fracturing processes. In this study, we selected three types of shales (kerogen-rich, argillaceous, and bituminous) with distinct compositions and microstructures and performed femtosecond laser irradiation with different power and energy to investigate their ablation characteristics. Evidence of melting and solidification was observed in all samples, despite the ultra-high pulse frequency of the femtosecond laser. Among the three types of shale rocks, the kerogen-rich shale exhibited the highest ablation rate, while argillaceous and bituminous shale showed lower and comparable rates. The above observations highlight the significance of shale chemistry in influencing laser ablation characteristics under femtosecond laser irradiation. Furthermore, no ablation rate anisotropy was observed when irradiating the samples parallel with and perpendicular to the bedding direction, although shale rocks are microstructurally and mechanically anisotropic.

Gravitational waves from particle decays during reheating

Gravitational waves have become an irreplaceable tool for exploring the post-inflationary universe. Their cosmological and astrophysical origins have been attracting numerous attention. In this Letter, we point out a novel source of ultra-high frequency gravitational waves: the decay of particles produced during the reheating era. We highlight the decays of the inflaton and the Higgs bosons in the Standard Model and in the gauged B-L model as representative cases, showing how they yield a testable gravitational wave spectrum by future observations. We find that the peak frequency and the strain in the Higgs boson decay in the gauged B-L model, when the symmetry breaking scale is higher than the inflationary scale, can be greater than those in the inflaton decay scenario. Typically, the predicted spectrum lies beyond MHz in frequency and thus calls for non-interferometric experiments. Regardless of the shape of the spectrum, on the other hand, the total energy density of the produced gravitational waves can be reached by future Big Bang nucleosynthesis limits.

Exploring the correlation between drug formulation and radio frequency performance in RFID-enabled pharmaceutical products

Radio Frequency Identification (RFID) is a burgeoning technology pivotal for optimizing intricate supply chains. Although its potential benefits in healthcare and pharmaceuticals are substantial, RFID implementation in these sectors has been slow-moving. Surprisingly, limited research has probed RFID performance on pharmaceutical products and their packaging. This study aims to explore the influence of diverse liquid drug formulations on RFID performance, utilizing a pre-optimized Ultra High Frequency (UHF) RFID tag. Five distinct drug formulations, encompassing water, saline, and lipids, were studied, alongside deionized (DI) water and empty vials as control subjects. The products were transferred to separate vials, each affixed with a pre-optimized UHF RFID tag. Performance evaluations, including Threshold Sweep, Orientation Sweep, and Population Analysis, were conducted to assess tag readability, focusing on sensitivity, backscatter, and theoretical read range. The results underscore how the composition of different pharmaceutical drug formulations significantly impact RFID tag readability in a controlled, reflection-free environment. These findings provide valuable insights for designing intelligent packaging to enhance the readability of RFID-tagged pharmaceutical products.

Life cycle assessment of plastic and paper-based ultra high frequency RFID tags

The aim of the work is to assess the environmental impacts of Ultra High Frequency RFID tags. Through a Life Cycle Assessment approach, two case studies have been investigated, namely a standard plastic and a paper-based tags. Primary data on tags’ components, manufacturing and transportation were collected, while secondary data for the raw materials processing and tags’ end of life were retrieved. The Recipe Midpoint method was used to evaluate the impacts. Results show that, for both tags, the greatest contributions to global warming, terrestrial acidification, mineral and fossil resource scarcity are due to raw material extraction (more than 50%) and manufacturing phase (30–50%), which resulted impactful also on the ionizing radiation (70%). Interestingly, the paper tag allows to save up to 23% of the greenhouse gas emissions and decreases the impact on the above-mentioned categories, resulting the eco-friendly option. The conclusion of the work contributes to update the scientific literature, still poor in RFID environmental evaluations, and are useful for researchers interested in comparing the traditional handling systems’ impacts to the RFID scenario. Furthermore, the outcomes will be used as input for subsequent research, aimed at developing a tool to measure the return on the environment of RFID deployments.

Ultrasound in Microsurgery: Current Applications and New Frontiers.

Ultrasound has revolutionized reconstructive microsurgery, offering real-time imaging and enhanced precision allowing for preoperative flap planning, recipient vessel identification and selection, postoperative flap monitoring, and lymphatic surgery. This narrative review of the literature provides an updated evidence-based overlook on the current applications and emerging frontiers of ultrasound in microsurgery, focusing on free tissue transfer and lymphatic surgery. Color duplex ultrasound (CDU) plays a pivotal role in preoperative flap planning and design, providing real-time imaging that enables detailed perforator mapping, perforator suitability assessment, blood flow velocity measurement, and, ultimately, flap design optimization. Ultrasound also aids in recipient vessel selection by providing assessment of caliber, patency, location, and flow velocity of recipient vessels. Postoperatively, ultrasound enables real-time monitoring of flap perfusion, providing early detection of potential flap compromise and improved flap survival rates. In lymphatic surgery, ultra-high frequency ultrasound (UHFUS) offers precise mapping and evaluation of lymphatic vessels, improving efficacy and efficiency by targeting larger dilated vessels. Integrating ultrasound into reconstructive microsurgery represents a significant advancement in the utilization of imaging in the field. With growing accessibility of devices, improved training, and technological advancements, using ultrasound as a key imaging tool offers substantial potential for the evolution of reconstructive microsurgery.

Atomic-Level Engineered Cobalt Catalysts for Fenton-Like Reactions: Synergy of Single Atom Metal Sites and Nonmetal-Bonded Functionalities.

Single atom catalysts (SACs) are atomic-level-engineered materials with high intrinsic activity. Catalytic centers of SACs are typically the transition metal (TM)-nonmetal coordination sites, while the functions of coexisting non-TM-bonded functionalities are usually overlooked in catalysis. Herein, the scalable preparation of carbon-supported cobalt-anchored SACs (CoCN) with controlled Co─N sites and free functional N species is reported. The role of metal- and nonmetal-bonded functionalities in the SACs for peroxymonosulfate (PMS)-driven Fenton-like reactions is first systematically studied, revealing their contribution to performance improvement and pathway steering. Experiments and computations demonstrate that the Co─N3C coordination plays a vital role in the formation of a surface-confined PMS* complex to trigger the electron transfer pathway and promote kinetics because of the optimized electronic state of Co centers, while the nonmetal-coordinated graphitic N sites act as preferable pollutant adsorption sites and additional PMS activation sites to accelerate electron transfer. Synergistically, CoCN exhibits ultrahigh activity in PMS activation for p-hydroxybenzoic acid oxidation, achieving complete degradation within 10min with an ultrahigh turnover frequency of 0.38min-1, surpassing most reported materials. These findings offer new insights into the versatile functions of N species in SACs and inspire rational design of high-performance catalysts in complicated heterogeneous systems.

Estimation of errors of the spectral method for measuring the concentration of water vapor and moisture reserves in the surface layer of the Earth’s atmosphere

A method for passive measurements of water vapor concentration in the atmosphere in the presence of solar radiation has been proposed and tested. The location of the measurements is the northeast of the Moscow region. When processing the results of measurements carried out on a single water absorption line, a coincidence of experimental data and data obtained from direct meteorological measurements with an error of no more than ~7.5 % was revealed. It was also found that on the water absorption line in the region of 1653 nm, the interfering factor is the nearby methane absorption line, which introduces a systematic error in the measurement results, and the results turn out to be underestimated. A possible reason is that the absorption cross section of methane molecules is ~4 orders of magnitude larger than that of water vapor molecules and light radiation is absorbed to a greater extent by methane, reducing the fraction of absorption of water vapor at a wavelength close to the methane absorption line. Compensatory corrections have been introduced to determine the concentration and moisture content in the atmospheric column with an accuracy of several percent at this wavelength. The proposed technique allows both long-term monitoring of concentration and moisture content in the atmosphere and obtaining operational information in real time. The results of the measurements performed are, on average, consistent with the results of measurements obtained using radiometers operating in the ultrahigh frequency range.

Folded Narrow-Band and Wide-Band Monopole Antennas with In-Plane and Vertical Grounds for Wireless Sensor Nodes in Smart Home IoT Applications

This article presents two monopole antennas with an endfire radiation pattern in the UHF band that can be installed on dry walls or metallic cabinets as a part of wireless sensor nodes, making them a suitable choice for smart home applications, such as the wireless remote control of house appliances. Two different antennas are proposed to cover the RFID bands of North America (902–928 MHz) and worldwide (860–960 MHz). The antennas have wide horizontal radiation patterns that provide great reading coverage in their communication with a base station placed at a certain distance from the antennas. The structures have two ground planes, one in-plane and the other vertical. The vertical ground helps the antenna to have a directive radiation and also makes it easily installed on walls. The antenna feeding line lies over the vertical ground substrate. The maximum dimensions of the narrow-band antenna are L × W = 0.3λ × 0.14λ, and those for the wide-band antenna are L × W = 0.39λ × 0.14λ. The measured results show that the bandwidth of the proposed antennas for the North America and worldwide RFID bands are from 902 MHz to 939 MHz and 822 MHz to 961 MHz, with maximum gains of 4.2 dBi and 4.9 dBi, respectively.

Boron/nitrogen-trapping and regulative electronic states around Ru nanoparticles towards bifunctional hydrogen production

Developing a straightforward and general strategy to regulate the surface microenvironment of a carbon matrix enriched with N/B motifs for efficient atomic utilization and electronic state of metal sites in bifunctional hydrogen production via ammonia-borane hydrolysis (ABH) and water electrolysis is a persistent challenge. Herein, we present a simple, green, and universal approach to fabricate B/N co-doped porous carbons using ammonia-borane (AB) as a triple functional agent, eliminating the need for hazardous and explosive functional agents and complicated procedures. The pyrolysis of AB induces the regulation of the surface microenvironment of the carbon matrix, leading to the formation of abundant surface functional groups, defects, and pore structures. This regulation enhances the efficiency of atom utilization and the electronic state of the active component, resulting in improved bifunctional hydrogen evolution. Among the catalysts, B/N co-doped vulcan carbon (Ru/BNC) with 2.1 wt% Ru loading demonstrates the highest performance in catalytic hydrogen production from ABH, achieving an ultrahigh turnover frequency of 1854 min−1 (depending on the dispersion of Ru). Furthermore, this catalyst shows remarkable electrochemical activity for hydrogen evolution in alkaline water electrolysis with a low overpotential of 31 mV at 10 mA cm−2. The present study provides a simple, green, and universal method to regulate the surface microenvironment of various carbons with B/N modulators, thereby adjusting the atomic utilization and electronic state of active metals for enhanced bifunctional hydrogen evolution.

High Performance Indium-Tin-Oxide Schottky Diodes for Terahertz Band Operation.

Schottky diode, capable of ultrahigh frequency operation, plays a critical role in modern communication systems. To develop cost-effective and widely applicable high-speed diodes, researchers have delved into thin-film semiconductors. However, a performance gap persists between thin-film diodes and conventional bulk semiconductor-based ones. Featuring high mobility and low permittivity, indium-tin-oxide has emerged to bridge this gap. Nevertheless, due to its high carrier concentration, indium-tin-oxide has predominantly been utilized as electrode rather than semiconductor. In this study, a remarkable quantum confinement induced dedoping phenomenon was discovered during the aggressive indium-tin-oxide thickness downscaling. By leveraging such a feature to change indium-tin-oxide from metal-like into semiconductor-like, in conjunction with a novel heterogeneous lateral design facilitated by an innovative digital etch, we demonstrated an indium-tin-oxide Schottky diode with a cutoff frequency reaching terahertz band. By pushing the boundaries of thin-film Schottky diodes, our research offers a potential enabler for future fifth-generation/sixth-generation networks, empowering diverse applications.

Empowering the Blind: Contactless Activity Recognition with Commodity Software-Defined Radio and Ultra-High-Frequency Radio Frequency Identification.

This study presents a novel computational radio frequency identification (RFID) system designed specifically for assisting blind individuals, utilising software-defined radio (SDR) with coherent detection. The system employs battery-less ultra-high-frequency (UHF) tag arrays in Gen2 RFID systems, enhancing the transmission of sensed information beyond standard identification bits. Our method uses an SDR reader to efficiently manage multiple tags with Gen2 preambles implemented on a single transceiver card. The results highlight the system's real-time capability to detect movements and direction of walking within a four-meter range, indicating significant advances in contactless activity monitoring. This system not only handles the complexities of multiple tag scenarios but also delineates the influence of system parameters on RFID operational efficiency. This study contributes to assistive technology, provides a platform for future advancements aimed at addressing contemporary limitations in pseudo-localisation, and offers a practical, affordable assistance system for blind individuals.

Modeling and radiation performance analysis of acoustically actuated magnetoelectric antennas

Bulk acoustic wave-mediated magnetoelectric (ME) antenna is the most promising acoustically actuated ultra-compact antenna scheme at ultrahigh frequency (0.3–3 GHz). However, the relevant research is still exploratory, and the antenna’s multi-field coupling modeling and performance analysis are imperfect. This work presents a cellular model based on finite element simulation to analyze the radiation characteristics of the ME antenna integrated on a thin-film bulk wave resonator (FBAR). Compared with the finite difference time domain (FDTD) method, the cellular model has the advantages of simplicity and high universality. The effects of mechanical and dielectric losses of piezoelectric (PE) material and mechanical and eddy current losses of magnetostrictive (MS) material on radiation efficiency are analyzed through the intensive research of unit cells of four different material combinations. Results show that the mechanical quality factors and piezomagnetic stress constant are the key parameters to determine the radiation efficiency. Besides conductivity and permeability, eddy current loss is also closely related to the thickness of the MS layer. This study provides a theoretical foundation for enhancing the radiation performance of ME FBAR antennas and identifying areas for further development.