Types Of Structures Research Articles

Synthesis and characterization of ZnO tetrapod-like nanorods without catalyst by wet thermal evaporation and applied on dye-sensitized solar cells

Dye-sensitized solar cells (DSSCs) continue to attract as one of the most important renewable energy technologies due to their simple production, environmentally friendly, and lower-cost fabrication process compared to the most common types of solar cells. Zinc oxide (ZnO) nanostructures have motivated researchers to fabricate DSSCs as photo-anodes due to their unique properties, such as different types of structures, appropriate optical properties, proper energy bandgap, and high electron transfer characteristics. This article reports the simple preparation of ZnO tetrapod-like nanorods using the wet thermal evaporation method on porous silicon substrate PS/Si and applied as a photoanode on DSSCs. ZnO nanostructures were characterized by using grazing-angle X-ray diffraction (XRD), scanning electron microscopy (SEM), and photoluminescence (PL) measurements. A significant difference in the performance of DSSCs has been investigated by using a standard dye di-tetrabutylammonium cis–bis(isothiocyanate)bis(2,2[Formula: see text]-bipyridyl-4,4[Formula: see text]-dicarboxylato) ruthenium (II) (N719) reloaded on ZnO tetrapod-like nanorods ([Formula: see text], [Formula: see text], [Formula: see text]%, and [Formula: see text]%) being more efficient than the ZnO spherical nanoparticles as a reference solar cell ([Formula: see text], [Formula: see text], [Formula: see text]%, and [Formula: see text]%).

The Electric Properties of the Magnetopause Boundary Layer

The magnetopause plays a pivotal role in the coupling among solar wind, the magnetosheath, and the magnetosphere. By analyzing magnetopause crossing events using MMS, we reveal a local non-neutrality of electric charges in the magnetopause boundary layer and the associated electric field. There are two types of electric structures. In one group, which typically occurs on the dusk side, the electric field directs towards the Earth. In the other, which generally occurs on the day side, the field directs away from the Earth. The spatial extent of this electric non-neutrality spans approximately 600 km, which is at the scale of ion gyrational motion. These findings provide valuable insights into the fine structures of the magnetopause and the coupling between the magnetosheath and the magnetosphere.

РАЗРАБОТКА ЭКОНОМИЧЕСКИ ОПТИМАЛЬНОГО МЕТОДА ОЦЕНКИ ВЛИЯНИЯ ХАРАКТЕРИСТИК И РАСПОЛОЖЕНИЯ ФУРНИТУРЫ ПРОТИВОПОЖАРНЫХ ДВЕРЕЙ НА ИХ ОГНЕСТОЙКОСТЬ

The article presents one of the important problems of developing new types of building structures, in particular fire-resistant doors, related to the need for large-scale studies to assess the impact on the fire resistance of door panels of hardware elements, the variety of which leads to significant costs when conducting a full-fledged analysis. This is also due to the fact that a large number of varieties of such elements are currently being developed and they, in turn, can have different effects on the materials used in the production of door panels, the fire-hazardous characteristics of which are known. As part of the development of a cost-effective approach to the study, a methodology has been developed that allows the analysis of small-sized samples. When testing the method, an analysis of the effect of the thickness of the fabric material and the area of the hardware element on fire resistance was carried out. It is thus fixed that the fittings are a refrigerant - they take on the heat passing through the door leaf material and divert it to the environment. Nevertheless, it has also been recorded that with small thicknesses of the structure and rapid heating of the material layer, it is possible to overheat it and reduce the efficiency of heat dissipation, which leads to a rapid decrease in fire resistance. In the case of placing fittings inside the fire door material, the heat removed is transferred to the outer unheated part of the door, thereby initiating its rapid warming up.fittings are a refrigerant - they take on heat and dissipate it into the environment, nevertheless, with small thicknesses of the structure and rapid heating of the material layer, it may overheat and reduce the efficiency of heat dissipation, and if the fittings are placed inside the fire door material, the heat is transferred to the outer unheated part of the door, thereby initiating its rapid heating. The developed method is a cost-effective option for studying the effect of fittings on the fire resistance of doors when choosing its component parts.

Forecasting Limits of Feasible Organization Growth by Using Key Predictors of Organizational Transformation

The article studies methodological approach, advanced by the author, to using key predictors of organizational transformation necessary to forecast limits of feasible organization growth within the frames of the present production structure. The principle distinguishing feature of this methodological approach is the use of indicators defined by the author as key predictors of organizational transformation. This set of indicators was identified by the author through results of earlier statistical research of transformation laws of organization production structure in different sectors of economy. With the help of such indicators it is possible not only to describe the predominant type of organization production structure but also, on the basis of their quantitative values, to identify limits of corresponding level of its development. Methodological approach advanced by the author is based on statistical methods of research and gives an opportunity to forecast limits of feasible organization growth based on the earlier developed method of their production structure. Within the frames of the given methodological approach the method of statistical forecasting limits of feasible organization growth was elaborated. The use of this methodology could allow organization management to forecast in advance the moments of coming organizational transformation, which is connected with changes in production structure type and to make necessary managerial decisions.

Comparative Study of RCC Structure of different types by using Shear Wall, Damper & Bracing System

In seismically active places, earthquake restrictions would provide a difficulty to the majority of multistory buildings. The fundamental issue in the design of the multi-story building is lateral stability, which is required to control lateral drift and displacement, withstand lateral pressures, and avoid buckling. Reinforced concrete (RCC) structures usually utilise a damper, bracing, and shear wall system to mitigate the impacts of seismic activity. Both systems have significant structural performance. Despite the fact that both technologies are used for the same purposes, their effects and behaviour in response to seismic load differ. The G+12 storey building, shear wall and bracings will all be considered in this project's analysis. The following criteria will be used to evaluate the building's performance: base shear, storey displacement, and storey drift. This research includes dampers, shear walls, and bracings at various places, and the Etabs 2018 programme will be utilised for the entire analysis.

Classical limits of Hilbert bimodules as symplectic dual pairs

Hilbert bimodules are morphisms between C*-algebraic models of quantum systems, while symplectic dual pairs are morphisms between Poisson geometric models of classical systems. Both of these morphisms preserve representation-theoretic structures of the relevant types of models. Previously, it has been shown that one can functorially associate certain symplectic dual pairs to Hilbert bimodules through strict deformation quantization. We show that, in the inverse direction, strict deformation quantization also allows one to functorially take the classical limit of a Hilbert bimodule to reconstruct a symplectic dual pair.

Text-to-Microstructure Generation Using Generative Deep Learning.

Designing novel materials is greatly dependent on understanding the design principles, physical mechanisms, and modeling methods of material microstructures, requiring experienced designers with expertise and several rounds of trial and error. Although recent advances in deep generative networks have enabled the inverse design of material microstructures, most studies involve property-conditional generation and focus on a specific type of structure, resulting in limited generation diversity and poor human-computer interaction. In this study, a pioneering text-to-microstructure deep generative network (Txt2Microstruct-Net) is proposed that enables the generation of 3D material microstructures directly from text prompts without additional optimization procedures. The Txt2Microstruct-Net model is trained on a large microstructure-caption paired dataset that is extensible using the algorithms provided. Moreover, the model is sufficiently flexible to generate different geometric representations, such as voxels and point clouds. The model's performance is also demonstrated in the inverse design of material microstructures and metamaterials. It has promising potential for interactive microstructure design when associated with large language models and could be a user-friendly tool for material design anddiscovery.

Exploring the Limits of Fe-Rich Chemistries in Na-Based CaFe2O4-Type Postspinel Oxides.

Structural trends, physical properties, and electrochemical performances of the NaFexRu2-xO4 system have been investigated. Synthesis attempts using both conventional solid-state routes and high-pressure methods were explored for the compositional range 1.0 ≤ x ≤ 1.67. Based on Rietveld refinements against powder X-ray diffraction data, analyses of 57Fe Mössbauer spectroscopy data, and elemental analysis by electron microprobe, the existence of a confined compositional solid solution (1 ≤ x ≤ 1.3) adopting the CaFe2O4-type postspinel structure is demonstrated. This is contrasted with the NaFexTi2-xO4 system, for which no evidence of a solid solution is observed. However, for all explored synthetic routes of NaFexRu2-xO4 compositions, a trivalent iron oxidation state is maintained. Structural analysis and qualitative bond valence energy landscape models reveal that the progressive integration of iron into the postspinel framework results in narrowed sodium ion diffusion channels, restricting electrochemical deintercalation of sodium. Consequently, the CaFe2O4-type iron-rich compounds explored in this study demonstrate limited potential as positive electrode materials for sodium batteries. It is expected that this fundamental insight will help guide the exploration of alternative NaM2O4-based positive electrode materials with similar structure types.

Bibliometric Analysis of Nitrogen Removal in Constructed Wetlands: Current Trends and Future Research Directions

Nitrogen pollution in water environments has reached critical levels globally, primarily stemming from agricultural runoff, industrial discharges, and untreated sewage. The excessive presence of nitrogen compounds poses a significant threat to water quality, leading to adverse impacts on ecosystems and human health. Reaching a breakthrough in the technology of constructed wetlands (CWs) for mitigating nitrogen pollution is hindered by existing knowledge gaps regarding the mechanisms involved in the removal process. Reaching this understanding, we offer a comprehensive summary of current advancements and theories in this research field. Initially, bibliometric techniques were employed to identify yearly patterns in publications and areas of research focus. Subsequently, the chosen documents underwent statistical analysis using VOSviewer_1.6.20 to determine countries’ annual productivity, significant publication years, influential authors, keyword clustering analysis, and more. Finally, a comprehensive overview is provided on the elimination of nitrogen through CWs, encompassing insights into microbial communities and structure types. This analysis aims to uncover potential strategies for optimizing the rate of nitrogen removal. Furthermore, this study elucidates the current research trend concerning the nitrogen removal performance of CWs and identifies challenges and future research directions in this field.

Detection method for structural defects of U-shaped hanging ring for power fittings based on magnetic leakage principle

The U-shaped hanging ring of electric power fittings is usually installed outdoors and operates in harsh environments. Under the combined effect of the weight of the conductor and wind load, the bending part at the bottom of the U-shaped hanging ring often experiences wear and cracks due to friction contact, which can easily lead to accidents such as the detachment of transmission lines. Traditional methods for detecting structural defects in ferromagnetic materials, such as ultrasonic testing, eddy current testing, and manual testing, are affected by environmental factors, have a shallow measurement depth, and are difficult to quantify. In order to solve the above problems, this paper proposes a measurement method for detecting structural defects in the U-shaped hanging ring of electric power fittings based on the principle of magnetic leakage. The magnetic leakage signal characteristics of U-shaped hanging ring defects under different excitation structural parameters and different defect types are analyzed. The method of arranging magnetic leakage signal measurement points is studied. The detection of defect parameters is achieved based on the characteristic quantity of the magnetic leakage signal under different defect conditions. Finally, the method is analyzed and verified through examples. The results show that this method can achieve quantitative detection of defect parameters in the U-shaped hanging ring under uniform structural defect and crack structural defect, and has the advantages of high measurement accuracy and small error. The research results of this paper can provide a scientific theoretical basis for the inspection and replacement of transmission line fittings in engineering, which is of great engineering significance for ensuring the safe and stable operation of the power grid.

The Science of Vegetation with Reference to India

Pt. I Vegetation is the sum total of plant population covering a region and its descrete units circumscribed by characteristic environment, are communities. The species content is the flora. The physical and the biological surroundings characterise the environmental complex. Both plants and their environment are dynamic systems interacting within and with each other. The amplitude of variations in the environment is generally met with synchronised adaptive responses of the plants in time and space. Differentiation of ecads and ecotypes within the plastic species is the result. However, many forms and invaders may get eliminated also if the situation goes beyond their range of tolerance set by the genetic organisation as the factors may become critical at different stages of the life-cycle. The species around provide the genetic material for recruitment and ecesis within the community.pt. II Migration of species involving mobility of disseminules, their germination, aggregation, competition and final ecesis-ever continuing processes lead to colonisation and invasions. All these plant phenomena react upon the environment introducing changes therein. Thus newer community-environment-complex equilibria are set up in the dynamic system. The whole process is called, succession in relation to time and the series of succeeding communities for a given area, a sere. When it happens ‘de novo’ with no trace of plant present originally in the area, it is prisere as a result of primary succession and subsere with disturbed communities in which secondary succession is the rule. The mechanism of succession is driven by the reacting and changing environment consequential largely either to the plant processes themselves or to extraneous forces succession is autogenic in the former and allogenic in the latter case. In every case succession terminates into a more stable climax community generally dependant upon the climate and soil. The taxa used for classifying communities differ widely among ecologists but association is the basic unit accepted by all, though with varying concepts. The concept of ecosystem in relation to energy and matter within the community is the most acceptable basis for comprehending;vegetation types in India.Pt. III Since vegetation evolves out of the flora floristic regions of India should form the basis of its main divisions. For this purpose three main latitudinal belts viz. (1) Eastern and Western Himalayas, (2) Assam, Gangetic Plains and Rajasthan, and (3) Deccan and Malabar are recognised. The seven provinces with their distinct climate including photoperiod can be individually considered for the description of vegetation types along gradients of altitude, humidity-aridity, history and proximity of human settlements and soil fertility. Along these gradients closed, open and desert types of structure within forests, scrub and grass can be described with their combinations wherever necessary. Physiognomy, structure, function, composition, dynamics, habitat relations and history are the important diagnostic criteria of vegetation types. Size, texture and seasonal behaviour of leaves of dominant species may also be given. The hydrophytes can be described in each place as floating, suspended, submerged anchored, floating-leaved anchored and emergent anchored.

Encapsulation structure and in-situ embedding test and model study of a new type of road piezoelectric energy collector

In recent years, research on road piezoelectric energy harvesters (RPEH) has made great progress in the field of road vibration energy harvesting. However, the research on the packaging structure and embedding method of RPEH is not comprehensive. In this paper, a new type of transducer unit structure is developed, which can improve the electrical energy output compared with the drum piezoelectric transducer, and its waterproof performance of the transducer unit is tested under different water depth and duration. Then, a new RPEH package structure is made, and the output performance is compared with the three commonly used package structures in the current research, and the field construction of RPEH with different embedding methods is carried out on the actual road to evaluate the electrical energy output capacity of RPEH under different embedding methods, and the best construction method of RPEH is summarized through durability test. Finally, the three-dimensional simulation model of RPEH with different construction methods is established, and the stress and voltage are analyzed by finite element method to verify the best embedding method. The test results show that the piezoelectric output efficiency of the new transducer unit is increased by 38.9 %, and it still has good electrical energy output after 24 h immersion at a depth of 1.5 m, and its waterproof level reaches IPX8. Under larger excitation frequency and load, the indoor output of RPEH in the new package structure has better output performance in indoor test. The bolt-spring package is used to apply pre-pressure to RPEH, and the output efficiency of RPEH is improved. When the excitation conditions are 10 kN, 10 Hz, the output power is increased by 11.1 %, 127.3 % and 247.4 % compared with the other three package structures. The maximum power of RPEH is 3.41 W by placing concrete on the bottom surface of RPEH sponge washer and using asphalt as the pavement layer to ensure the durability of piezoelectric pavement. The finite element analysis illustrates the strain and voltage variation of piezoelectric pavement with different embedment modes, and the simulation results are consistent with the test results. The research results provide an important basis for the design of RPEH packaging structure and embedding method in road piezoelectric engineering.

Kinetic Relationships of the Adsorption of Lysozyme and Bovine Serum Albumin onto Zeolites of BEA and MFI Structural Types

Kinetic Relationships of the Adsorption of Lysozyme and Bovine Serum Albumin onto Zeolites of BEA and MFI Structural Types

Researching on the Effect of Input Parameters on the Quality and Manufacturability of 3D-Printed Cellular Samples from Nylon 12 CF in Synergy with Testing Their Behavior in Bending.

The study of cellular structures and their properties represents big potential for their future applications in real practice. The article aims to study the effect of input parameters on the quality and manufacturability of cellular samples 3D-printed from Nylon 12 CF in synergy with testing their bending behavior. Three types of structures (Schwarz Diamond, Shoen Gyroid, and Schwarz Primitive) were selected for investigation that were made via the fused deposition modeling technique. As part of the research focused on the settings of input parameters in terms of the quality and manufacturability of the samples, input parameters such as volume fraction, temperature of the working space, filament feeding method and positioning of the sample on the printing pad were specified for the combination of the used material and 3D printer. During the experimental investigation of the bending properties of the samples, a three-point bending test was performed. The dependences of force on deflection were mathematically described and the amount of absorbed energy and ductility were evaluated. The results show that among the investigated structures, the Schwarz Diamond structure appears to be the most suitable for bending stress applications.

“Come thou the spirits of village and locality, come thou the spirits of sons and daughters!”

Abstract This paper discusses the ritual language of Thadou-Kuki, a Tibeto-Burman language of the Kuki-Chin subgroup spoken in Northeastern India and the Chin State of Myanmar. The paper examines 13 ritual texts to determine the nature of language use and the types of structure that ritual language provides. The paper discusses the general belief surrounding the traditional religion as background information to the types of ritual language discussed in the paper. This is followed by a discussion on the structure of ritual language in terms of composition, grammatical constructions, and the choices of words used in the ritual language of Thadou-Kuki, including archaic expressions that are characteristic of ritual language. From the analysis of the ritual texts, the paper discusses the types of repetition at the level of syllables and paragraphs/stanzas. Each stanza is further divided into couplets of repetitive phrases (differing mostly in the initial words of a phrase or sentence). The paper divides the ritual language of Thadou-Kuki into two, namely invocation and direct address to the spirits. The former makes use of imperatives, namely the request –ô, the invitational –în, and the hortative –hèen. Direct address to the spirits, on the other hand, makes use of the declarative mood, namely, a clause or sentence-final marker –e.

ПРОЄКТУВАННЯ ТЕАТРАЛЬНО-ВИДОВИЩНИХ ЦЕНТРІВ ДЛЯ ДІТЕЙ ТА МОЛОДІ (на прикладі досвіду кафедри дизайну архітектурного середовища)

The article explores the influence of educational, research, and competitive design of theatrical and spectacle buildings developed by professors and students of the Department of Architectural Environment Design at the Institute of Architecture and Design National University "Lviv Polytechnic". Within the framework of the contemporary cultural and educational environment, where active youth participation is a vital component of cultural development, there is a necessity for the creation of adaptive, innovative spaces for creativity and communication. The persistence of outdated architectural forms, characteristic of the Soviet period, particularly in segments like theaters for young audiences and puppet theaters, is emphasized. The absence of innovation in these types of structures at the beginning of the 21st century is noted, especially concerning theatrical and spectacle institutions such as theaters for young audiences and puppet theaters, which continue to exist but do not meet the modern needs for quality cultural education of Ukrainian youth. An analysis of over ten projects at all levels shows that a significant portion not only reproduces the concepts of architects from the second half of the 20th century but also incorporates elements inherited from theatrical and spectacle buildings of the former USSR. However, in recent years, the Lviv architectural school, particularly following the establishment of the Department of Architectural Environment Design, has shown a tendency towards experimentation and the search for innovative solutions for the architecture of the future. This is evidenced by the results of educational and competitive design projects, as well as the introduction of special courses that revive the ideas of futuristic architecture from the last century. Achievements in this field reflect the architectural visions of renowned masters such as F. Kiesler and I. Leonidov, as well as contemporary researchers like A. Quarmby, K. Tange, B. Fuller, G. Golmin and G. Kreiger, who explore the possibilities of future architecture. The article provides a classification of theatrical and spectacle centers for children and youth. The author discusses factors that continue to negatively impact the development of theatrical and spectacle centers in Ukraine in the future. The experience of designing research, educational, and competitive projects, exemplified by the activities of the Department of Architectural Environment Design, demonstrates that it can find application in the applied architectural and construction industry of the country as a whole.

Influence of Sustainable Grout Material on the Moisture Damage of Semi-flexible Pavement

Semi-flexible pavement (SFP), also known as grouted pavement, is a type of pavement structure consisting of a porous asphalt skeleton with air voids between 25 and 35% injected with cementitious grout materials. The special skeleton of SFP provided enhanced durability and resilience, making it a promising option for the construction of road surfaces in high-traffic areas and severe conditions. The main aim of the current research is to investigate the rutting behavior and moisture resilience of SFP-containing sustainable grout using ceramic waste powder (CWP). This research introduced the use of CWP as a replacement for conventional grout (cement) in SFP for the first time. CWP partially replaced cement at ratios of 15, 20, 30, 40, and 50% of the cement weight. Indirect Tensile Strength (ITS) and Hamburg Wheel Tracking Tests (HWTT) were used to evaluate the performance of SFP to reduce the detrimental effect of moisture. The grout modified with CWP shows excellent results in the ITS and Tensile Strength Ratio (TSR), and all modified SFP mixtures give higher values in these tests compared with Control Mix (CM). In the HWTT, the minimum rut depth of the modified SFP was 2.8 mm and 3.10 mm. Compared to CM, rutting decreased by 73%–76% for CWP mixes with 20% and 30% replacement. This indicates the high fluidity of CWP, which enabled it to penetrate all voids in the porous pavement (PA) and form a dense microstructure due to its excellent pozzolanic interaction, making it a strong structure capable of bearing rutting.

Detecting the Core of a Network by the Centrality of the Nodes

Abstract Many networks exhibit the core/periphery structure. Core/periphery structure is a type of meso-scale structure that consists of densely connected core nodes and sparsely connected peripheral nodes. Core nodes tend to be well-connected both among themselves and to peripheral nodes which tend not to be well-connected to other nodes. In this brief report, we propose a new method to detect the core of a network by the centrality of each node. It is discovered that such nodes with the non-negative centrality often consist of the core of the networks. The simulation is carried out on the different real networks. And the results could be checked by the objective function. The checked results may show the effectiveness of the simulation results by the centralities of the nodes on the real networks. Furthermore, we discuss the characters of networks with the single core/periphery structure and point out the scope of the application of our method at the end of this report.

Low-temperature properties of magnetically frustrated rare-earth zirconates A 2Zr2O7

Rare-earth A 2Zr2O7 zirconates have attracted considerable attention of the scientific community for their complex magnetic, electronic and material properties applicable in modern technologies. The light rare-earth members of the series, crystallising in the pyrochlore variant of cubic crystal structure, have been studied in detail. The heavier A 2Zr2O7 compounds have been investigated mainly from the material properties viewpoint, focussing on their thermal properties and stability at high temperature and pressure. Low-temperature studies were mostly missing until recently. We present the low-temperature magnetic and thermodynamic properties of A 2Zr2O7 with A = Y, La, Nd, Eu, Gd, Tb, Dy, Ho, Tm, Yb, and Lu, well covering the whole series, newly synthesised by high-temperature sintering and melting methods. X-ray diffraction reveals and confirms the ordered pyrochlore structure in the light members, the disordered cubic structure of the defect-fluorite type in A 2Zr2O7 with A = Y, Gd–Yb, and finally the lower symmetry rhombohedral structure in the end-member Lu2Zr2O7. The specific heat of the investigated compounds is dominated by a low-temperature anomaly associated with magnetic ordering: long-range in light rare-earth zirconates; and short-range in heavier members. The effective magnetic moment in the studied compounds, determined by fitting the magnetisation data to the Curie–Weiss formula, is in good agreement with the expected value of the A 3+ free ion. The magnetic properties have been revealed to be strongly influenced by the geometric frustration of the magnetic moments of both the pyrochlore structure, as well as the face centred cubic lattice created by the cations of the defect-fluorite structure, but connected also to intrinsic atomic disorder. The experimental results are discussed in the framework of previous studies on A 2Zr2O7 zirconates, as well as other A 2 B 2O7 compounds.

Investigation of design methodology for doubly-fed bearingless flux reversal motor

This article integrates the technology of bearingless motors with the basic theory of magnetic flux reverse motors, proposes a doubly fed bearingless magnetic flux reverse motor, and conducts research on its structural design, operating mechanism, electromagnetic performance analysis, mathematical model, control method, digital control system, and other aspects. The basic structure of a new type of doubly fed bearingless magnetic flux reverse motor is designed, and the principle of radial suspension force generation is studied. The performance related to torque and radial suspension force is analyzed. A mathematical model of torque and radial suspension force is established, including magnetic field distribution, no-load permanent magnet flux, and no-load back electromotive force. A doubly fed bearingless magnetic flux reverse motor system is designed and constructed, and inductance experiments are conducted.