Types Of Contact Lenses Research Articles

Diurnal Variations in Visual Performance for Disposable Contact Lenses

The purpose of this study is to compare the visual performance provided by different daily disposable contact lenses and to analyze its variation over time. Visual performance was evaluated in terms of visual acuity (VA) and contrast sensitivity (CS) in 15 myopic subjects (-0.50 to -4.00 diopters) who had been previously fitted with each one of the following seven types of soft contact lenses: DAILIES TOTAL1 (Alcon, Forth Worth, TX), DAILIES AquaComfort Plus (Alcon), 1-DAY ACUVUE TruEye (Johnson & Johnson Vision Care, Jacksonville, FL), 1-DAY ACUVUE MOIST (Johnson & Johnson Vision Care), SofLens daily disposable (Bausch & Lomb, Rochester, NY), Proclear 1 Day (CooperVision, Fairport, NY), and Clariti 1-Day (Sauflon, Twickenham, United Kingdom). We measured VA at three contrast levels (10%, 50%, and 100%) and CS for three spatial frequencies (10, 20, and 25 cycles/degree). These measurements were performed at 2-hr intervals during a 12-hr period of continuous wearing. Measurements were also performed with ophthalmic lenses before contact lens fitting. Two-way analysis of variance (ANOVA) results revealed significant differences across the lens types and over time for low-contrast VA only. For high- and medium-contrast VA, ophthalmic lens performed better than the contact lenses after 12 hr of use (without statistical differences among the contact lenses). Contrast sensitivity values also showed differences across lenses for the three spatial frequencies under analysis. For each particular lens type, no CS variations were observed with wearing time. Although some of the differences were not statistically significant, we found that, for many of the VA and CS measures, ophthalmic lens and DAILIES TOTAL1 yielded better values than the 1-DAY ACUVUE TruEye and Clariti 1-Day. Assessing VA at different contrasts and CS measurements allowed us to perform a visual function evaluation. Contact lens characteristics such as material and water content, among others, may be the cause of the differences in visual performance that emerged from this study. Our findings provide useful information for contact lens practitioners.

아이라이너 침착에 의한 소프트 콘택트렌즈 파라미터의 변화 및 세척효과의 비교

목적: 본 연구에서는 눈 화장품인 아이라이너에 노출시킨 소프트 콘택트렌즈의 파라미터가 어떻게 변하는가를 알아보고, 세척방법을 달리하여 세척하였을 때의 세척효과와 렌즈 파라미터의 회복정도를 비교하고자 하였다. 방법: 서로 다른 재질로 제조된 3종류의 소프트 콘택트렌즈에 각각 1시간, 4시간 및 6시간 동안 아이라이너를 침착시킨 후 안경용 초음파 세척 및 손 세척을 시행하였으며, 세척 전후 렌즈의 가시광선 투과도, 직경 및 표면의 변화를 비교하였다. 결과: 소프트 콘택트렌즈의 가시광선 투과도는 아이라이너의 침착시간이 길어질수록 감소하였다. 렌즈의 표면을 관찰한 결과 아이라이너의 침착 양상은 렌즈재질의 물성에 따라 다르게 나타나 narafilcon A 재질 렌즈에서 가장 침착이 큼을 알 수 있었다. 렌즈 직경은 hilafilcon B 및 etafilcon A 재질 렌즈는 감소하였으나, narafilcon A재질 렌즈는 증가하는 것으로 나타났다. 이러한 아이라이너의 침착은 안경용 초음파 세척기를 이용한 세척보다는 다목적 용액을 이용한 손 세척 시 세척효율이 우수한 것으로 나타났으나 렌즈의 직경이나 가시광선 투과도, 렌즈표면 등 렌즈 파라미터가 원래 상태로 회복되는 데에는 한계가 있었다. 결론: 이상의 결과로 소프트렌즈를 착용한 상태에서 눈 화장 하는 것을 최소화하는 것이 옳으며, 반복적으로 눈 화장을 할 때에는 렌즈 파라미터의 변화를 고려한 착용시간의 단축이나 빠른 렌즈의 교체주기가 필요하다고 사료된다. Purpose: This study was conducted to investigate the change of soft contact lens parameters after eyeliner deposition and compare the cleaning efficiency and the recovery rate of lens parameters by different cleaning methods. Methods: The eyeliner was deposited on three types of soft contact lenses made of different materials for 1 hour, 4 hours and 6 hours and those lenses were washed by the eyeglasses ultrasonic cleaning and by hands. The changes in visible light transmittance, diameter and surface of those lenses were compared before and after cleaning of the lens. Results: The visible light transmittance of soft contact lenses decreased along with the deposition time of eyeliner. The patterns of the eyeliner deposition on soft contact lens appeared differently depending on the physical properties of the lens material. Thus, the largest eyeliner deposition was found on narafilcon A lens. The diameters of hilafilcon B and etafilcon A lenses were decreased, however, the diameter of narafilcon A lens was increased. The cleaning efficiency of the eyeliner deposition was greater with the multipurpose solution by hands than with the eyeglasses ultrasonic cleaner. However, the recovery of lens parameters such as the lens diameter, visible light transmittance and lens surface due to the eyeliner deposition to its original state was limited. Conclusions: From these results, it is suggested to minimize eye makeup when wearing soft contact lens. Furthermore, the reduced wearing time and shorter cycle of lens replacement may be needed by considering a change of lens parameter when the repeat eye makeup is applied.

Incidental discovery of circle contact lens by MRI: you can’t scan my poker face, circle contact lens as a potential MRI hazard

BackgroundCircle contact lenses, also known as color contact lenses and big eye contact lenses, are a type of cosmetic contact lens. It is not generally known that a circle contact lens usually contains iron oxide and other metals, which means their use during magnetic resonance imaging (MRI) is a potential hazard.Case presentationWe present a rare case of incidental discovery of circle contact lenses by MRI and MRI images of circle lenses in vitro.ConclusionsCircle contact lenses usually contain iron oxide, which is a known source of susceptibility artifact on MRI. Not only radiologists and radiographers but also referring physicians should be familiar with the imaging findings and potential risk of scanning circle contact lenses by MRI.

On‐eye optical quality of daily disposable contact lenses for different wearing times

To quantify the optical quality of various daily disposable contact lenses in vivo and to ascertain its variation in terms of wearing time by means of objective non-invasive determination of wavefront patterns. The crx1 adaptive-optics system was used to measure the wavefront aberrations in 15 myopic eyes before and at 2-h intervals after contact lens fitting, over a 12-h wearing period. Seven types of contact lenses having different material, water content and lens design were evaluated in this study: Dailies Total1, Dailies AquaComfort Plus, Proclear 1 Day, 1-Day Acuvue TruEye, 1-Day Acuvue moist, SofLens daily disposable and Clariti 1-Day. The aberration data were analysed by fitting Zernike polynomials up to the 5th-order for 3 and 5-mm pupils. The optical quality under each condition and at each point in time was described by means of the Root-Mean-Square (RMS) value of wavefront aberration, Modulation Transfer Function (MTF), Point Spread Function and cut-off spatial frequency. A RMS increase was observed after contact lens fitting as well as over time, both for a 3-mm and a 5-mm pupil. Each type of lens induced a different amount of wavefront aberrations, which vary over time also in a different manner. Dailies Total1 showed the lowest RMS values both at baseline and at the end of the day. In addition, Dailies Total1 provided the best MTF out of all the contact lenses that were assessed. These observations were reflected in higher cut-off spatial frequencies and visual resolution both at baseline and after 12h of wearing time. Aberrometry makes it possible to analyse accurately and in vivo the optical quality of contact lenses and to assess how lenses having different characteristics - such as material or water content - behave for different wearing times. These variations across contact lenses may result in differences in visual performance.

Identification and susceptibility to multipurpose disinfectant solutions of bacteria isolated from contact lens storage cases of patients with corneal infiltrative events

Corneal infiltrative events (CIEs) are being reported with increasing frequency in lens wearers and may be related to specific multipurpose disinfecting solution (MPDS), contact lens type or bacterial bio-burden. Here, the efficacy of MPDS's against bacteria from contact lens storage cases (CLSC) of patients with CIEs was investigated. Eighteen CLSC from patients with CIEs were cultured. All reported using the same MPDS based on PQ-1+Aldox+nonanoyl-EDTA prior to experiencing CIEs. Bacteria were identified and tested for sensitivity to MPDS-1 and three other MPSDs. 16/18 CLSC (89%) contained bacterial counts of ≥10(4)-10(8)/mL. Achromobacter spp. was most frequently identified and was found in 11/18 cases (61%). This was followed by 4/18 (22%) Stenotrophomonas maltophilia, 3/18 (17%) Serratia marcescens, 3/18 (17%) Delftia spp., 2/18 (11%) Elizabethkingia spp., 2/18 (11%) Chryseobacterium indologenes and 1/18 Sphingobacterium spiritivorum. Acanthamoeba was not isolated. All of the Achromobacter strains were resistant to MPDS-1 with <1log10 kill up to 14 days exposure and the solution also showed reduced efficacy against the other isolates at the manufacturer's recommended disinfection time of 6h. Two strains of S. maltophilia and Delftia spp. grew in the solution over 14 days. Factors responsible for causing adverse events such as CIEs in contact lens wearers remain unclear. However, the presence of significant bio-burden in the contact lens storage case and lens may initiate an immunological response resulting in CIEs either directly or through the release of endotoxins (e.g. lipopolysaccharides) from the bacterial outer cell membrane.

CHARACTERIZATION OF NANOMATERIAL-BASED CONTACT LENSES BY ATOMIC FORCE MICROSCOPY

In this paper the comparative studies were conducted of the surface areas of nanophotonic contact lens and contact lens made from base material, measured by Nanoprobe Atomic Force Microscope. Nanoprobe atomic force microscopy (AFM) provides information on the size structure on nano scale level, the form of recorded structures (cavities), their distribution of the surface, and the total roughness of the scanned area. The atomic force microscope used in this study is a SPM-5200 of JEOL, Japan. AFM consists of a cantilever with a sharp tip (probe) at its end that is used to scan the specimen surface. Images of the specimen surface are created by measuring the deflection of the cantilever. The cantilever used in this study is produced by MikroMasch (Estonia) by trade name NCS18/Co-Cr. This AFM probe is silicon etched probe tip that has conical shape. It is coated with Co and Cr layers. Images of surface topography were obtained for each type of contact lenses. The base material of contact lens was made from PMMA and the nanophotonic contact lens was made of fullerene doped PMMA. Fullerenes were used because of their good transitive characteristics in ultraviolet, visible and near infrared light spectrums. Measurements were done at room temperature. Results of topography for both materials are presented and compared.

CHARACTERIZATION OF NANOMATERIAL-BASED CONTACT LENSES BY ATOMIC FORCE MICROSCOPY

In this paper the comparative studies were conducted of the surface areas of nanophotonic contact lens and contact lens made from base material, measured by Nanoprobe Atomic Force Microscope. Nanoprobe atomic force microscopy (AFM) provides information on the size structure on nano scale level, the form of recorded structures (cavities), their distribution of the surface, and the total roughness of the scanned area. The atomic force microscope used in this study is a SPM-5200 of JEOL, Japan. AFM consists of a cantilever with a sharp tip (probe) at its end that is used to scan the specimen surface. Images of the specimen surface are created by measuring the deflection of the cantilever. The cantilever used in this study is produced by MikroMasch (Estonia) by trade name NCS18/Co-Cr. This AFM probe is silicon etched probe tip that has conical shape. It is coated with Co and Cr layers. Images of surface topography were obtained for each type of contact lenses. The base material of contact lens was made from PMMA and the nanophotonic contact lens was made of fullerene doped PMMA. Fullerenes were used because of their good transitive characteristics in ultraviolet, visible and near infrared light spectrums. Measurements were done at room temperature. Results of topography for both materials are presented and compared.

Contact lens prescribing pattern in India—2011

To understand the pattern of prescribing contact lenses (CL) among Indian practitioners. Survey forms were sent to 257 practitioners across the country to collect information about their last 10 CL fits, location and type of practice, years of experience and educational qualification. A logistic regression analysis was performed to determine any association of various factors to the lens fitting pattern and chi-square test was used to compare proportions. The data were analyzed using SPSS v.16. CL fitting details from 227 practitioners were acquired representing a total of 2270 fits. The mean age of patients was 26.8±7.4 years and 67% of them were females. Ninety-eight percent of patients wore soft CL comprising 24% toric lenses. Ninety percent patients preferred disposable modality with 65% of these opting for monthly disposable lenses. Twenty-eight percent of the lenses dispensed were silicone hydrogel (SiH) lenses. Optometry practices located in metropolitan cities dispensed significantly higher numbers of disposable (p<0.001) and SiH lenses (p<0.001). Logistic regression analysis showed Fellowship of International Association of Contact Lens Educators (FIACLE) (OR: 13.79, 95% CI: 2.61-72.70), post graduate degree (OR: 3.87, 95% CI: 0.87-17.12) and years of experience were directly associated with fitting of advanced CL. The CL prescribing patterns in India elicited from this survey suggest the dominance (90%) of prescribing of disposable soft CL. Higher level of education, greater experience and a FIACLE status were significantly associated with advanced fitting.

Are Silicone Hydrogel Contact Lenses More Comfortable Than Hydrogel Contact Lenses?

The current literature review was intended to investigate whether the use of silicone hydrogel contact lenses has resulted in improved comfort compared with that of hydrogel contact lenses when both are used for daily wear. The conclusion reached is that silicone hydrogel contact lenses, which were initially developed to eliminate hypoxia during overnight wear, have not significantly improved comfort compared with the comfort achieved with hydrogel contact lenses when worn on a daily wear basis, even though a body of the published literature would suggest to the contrary. A careful review and consideration of the literature demonstrates that the relative comfort achieved with the two types of contact lenses is in fact highly dependent on the study methodology: Although refitting studies have concluded enhanced comfort with silicone hydrogels, the more robust study designs involving concurrent controls and masking were not able to show a difference, and some even concluded an inferior performance. Evidence-based review has however clearly demonstrated that comfort cannot be considered in isolation but is contact lens specific and depends on the material surface and bulk properties, lens design characteristics, and modality of use of the contact lens, and may also be significantly influenced by the replacement frequency and interaction with any lens care system that may be used.

Reverse Geometry Hybrid Contact Lens Fitting in a Case of Donor-Host Misalignment after Keratoplasty

ABSTRACT Purpose To report the successful outcome obtained after fitting a new hybrid contact lens in a cornea with an area of donor-host misalignment and significant levels of irregular astigmatism after penetrating keratoplasty (PKP). Materials and methods A 41-year-old female with bilateral asymmetric keratoconus underwent PKP in her left eye due to the advanced status of the disease. One year after surgery, the patient referred a poor visual acuity and quality in this eye. The fitting of different types of rigid gas permeable contact lenses was performed, but with an unsuccessful outcome due to contact lens stability problems and uncomfortable wear. Scheimpflug imaging evaluation revealed that a donor-host misalignment was present at the nasal area. Contact lens fitting with a reverse geometry hybrid contact lens (Clearkone, SynergEyes Carlsbad) was then fitted. Visual, refractive, and ocular aberrometric outcomes were evaluated during a 1-year period after the fitting. Results Uncorrected distance visual acuity improved from a prefitting value of 20/200 to a best corrected postfitting value of 20/20. Prefitting manifest refraction was +5.00 sphere and .5.50 cylinder at 75°, with a corrected distance visual acuity of 20/30. Higher order root mean square (RMS) for a 5 mm pupil changed from a prefitting value of 6.83 μm to a postfitting value of 1.57 μm (5 mm pupil). The contact lens wearing was referred as comfortable, with no anterior segment alterations. Conclusion The SynergEyes Clearkone contact lens seems to be another potentially useful option for the visual rehabilitation after PKP, especially in cases of donor-host misalignment. How to cite this article Pérez-Cambrodí RJ, Ruiz-Fortes P, Llorens DPP. Reverse Geometry Hybrid Contact Lens Fitting in a Case of Donor-Host Misalignment after Keratoplasty. Int J Kerat Ect Cor Dis 2013;2(2):69-72.

The study of vision correction options in athletes with myopia

Aim. To study the options to correct vision in athletes with myopia. Methods. 100 athletes with myopia, going in for different sports, (male - 49, female - 51, aged 14 to 35 years) were examined and questioned. The questionnaire contained questions regarding following issues: sports type, myopia degree, type of vision correction, type of contacts, wear schedule of contact lenses, adverse effects. Ophthalmic examination included visual acuity testing, eye examination with automated refractor and anterior biomicroscopy. Results. Low myopia was diagnosed in all of the athletes examined. 49% of them did not used any vision correction because of the low degree of myopia - less than 0.75 dpt, the rest 51% used glasses in 18% of cases and contacts in 33% of cases. Athletes participating in injury-prone sports or sports requiring good long distance vision and good peripheral vision such as ice hockey, volleyball, football, used the contact lenses. Hence, the contact lens type did not complied with recommended for use in sports by their replacement schedule. 81% of questioned athletes wore lenses with 4-week replacement period or of longer use instead of daily disposable lenses that are preferable. In 18% of athletes wearing contacts a chronic conjunctivitis was diagnosed. Conclusion. For external eye complications prevention in athletes going in for injury-prone sports not only type of vision correction but the contact lenses replacement schedule matters.

Severe Limbal Stem Cell Deficiency From Contact Lens Wear: Patient Clinical Features

To describe characteristics of patients with severe limbal stem cell deficiency associated with contact lens (CL) wear. Retrospective case series. Database search of patients with severe limbal stem cell deficiency related to CL wear was conducted. The charts of 12 patients (18 eyes) were reviewed. Outcome measures included patient demographics, CL type, duration of wear, indications for wear, symptoms, location and laterality of limbal stem cell deficiency, coexisting ocular disease, and treatment. Mean patient age at presentation was 42 years (range, 19 to 58 years), and 8 patients (67%) were female. Mean duration of CL wear was 14.1 years (range, 1 to 20 years), 6 patients (50%) had bilateral disease, and all wore soft CLs for refractive error correction. Vision was decreased to a mean of 20/78 (range, 20/30 to 20/250) in all eyes. Fifteen eyes (83%) had photophobia, pain, or both. Findings leading to the diagnosis included whorl-like epitheliopathy, corneal conjunctivalization, and late fluorescein staining of the involved epithelium for at least 6 clock hours. On average, 10 clock hours (range, 6 to 12 clock hours) were involved, and 11 eyes (61%) had total ocular involvement. Conservative treatments failed in all eyes. Fourteen eyes (78%) underwent limbal stem cell transplantation with systemic immunosuppression. Severe limbal stem cell deficiency related to CL wear is a clinical diagnosis that an ophthalmologist should recognize. Female patients, soft CLs, and extended duration of wear time are associated with this condition. Conservative measures may not reverse the disease, and limbal stem cell transplantation with systemic immunosuppression is a surgical option for these young and healthy patients.

Overnight orthokeratology with two brands of reverse-geometry contact lenses

To evaluate the refractive and corneal topographical changes of overnight orthokeratology in myopia with two brands of contact lenses. Fourty-four eyes of 22 myopic patients with manifest refraction spherical equivalent (MRSE) of -1.00 to -5.00 D (cylinder≤-1.0) were fitted with either DreamLens (Hanita Lenses Investments, Hanita, Israel) (group A) or Rinehart-Reeves (R&R; Danker Laboratories, Sarasota, FL) (group B) reverse-geometry lenses. Each subject eye was evaluated in regards to the uncorrected and corrected distance visual acuities, manifest refraction, slit lamp biomicroscopy, and corneal topography at each follow-up examination. The follow-up was 1 year. For groups A and B, the mean uncorrected distance visual acuity was -0.02±0.10 logMAR (20/20) and -0.08±0.12 logMAR (20/20) respectively at year-1 examination. The mean MRSE decreased from -2.70±0.9D to -0.50±0.08D in group A and -3.1±1.1 to -0.62±0.18D in group B at week-1; and remained stable thereafter in each group. For both groups, starting with week-1, the mean anterior best-fit sphere (ABFS) was statistically significantly flatter from baseline. A high correlation was found between the change in apical corneal power (ACP) and MRSE (r1=0.79, r2=0.71), and there was a good correlation between the change in ABFS and MRSE (r1=0.67, r2=0.64) in both groups. No significant ocular adverse events were observed during study. Both types of contact lenses safely and effectively decreased the myopic refractive error at 1 year follow-up. The refractive effect was mainly induced by the changes in the anterior corneal shape and the ACP.

The use of contact lenses during water-polo play: A 20-year study of Japanese college players

This study investigated the extent of contact-lens use in Japanese college water-polo male players over 20 years (1991–2011, once every five years). Information about the use of contact lenses during play and the types of contact lens was obtained through a self-report questionnaire. The proportion of contact lens use among the players while playing water polo differed from 1991 to 2011 (χ2(4) = 25.28, P < 0.001, Cohen’s d = 0.63). Fifty-four per cent of the players used contact lenses while playing in 1991 (P < 0.001); more than 74% in 1996; 89% in 2001; 84% in 2006; and 86% in 2011. While 96% of the contact lenses used by the players in 1991 were the soft type, 74%, 92%, 86%, and 88% of the contact lenses used in 1996, 2001, 2006, and 2011, respectively, were the disposable type. These findings indicated a high percentage of players were using contact lenses while playing water polo between 1996 and 2011. This could be because the majority of players used disposable lenses. The results suggest that increasing use of contact lenses by water-polo players is beneficial.

Daily disposable lenses: The better alternative

As the literature has described the increasing penetration of DDSL into the contact lens market worldwide, this review aimed to describe the development of this modality as a solution to the problems experienced with other types of contact lenses. The advantages of DDSL in comparison to reusable lenses are discussed. The important role of the practitioner in prescribing for and managing patients using this lens type are also examined, in particular with respect to non-compliance. Problems with the use of this lens type and possible solutions are explored and new applications and future development in this field are described.

The Role of Type III Secretion System and Lens Material on Adhesion ofPseudomonas aeruginosato Contact Lenses

To determine the distribution of invasive and cytotoxic genotypes among ocular isolates of P. aeruginosa and investigate the influence of the type III secretion system (T3SS) on adhesion to conventional, cosmetic, and silicone hydrogel contact lenses (CL). Clinical isolates from 2001 to 2010 were analyzed by multiplex PCR for exoS, exoU, and exoT genes. Bacterial adhesion to etafilcon, nelfilcon (gray colored), balafilcon, and galyfilcon CL with or without artificial tear fluid (ATF) incubation were compared. Surface characteristics were determined with scanning electron microscopy (SEM). Among 87 total isolates, 64 strains were from microbial keratitis cases. CL-related microbial keratitis (CLMK) isolates were mostly of the cytotoxic genotype (expressing exoU) (P = 0.002). No significant differences were found in bacterial adhesion to all types of CL between the genotypes under T3SS-inducing conditions. A trend for least bacterial adhesion of galyfilcon compared to the other CL was noted for both genotypes. Needle complex pscC mutants adhered less to all materials than the wild type (P < 0.05), indicating a role of the T3SS in contact lens adhesion. ATF-incubated CL had significantly more bacterial adhesion (P < 0.05). SEM showed most of the bacteria adhering on CL surfaces. CLMK isolates were mostly of cytotoxic genotype. Different genotypes did not significantly differ in its adhesion to various CL. T3SS and other adhesins are involved in bacteria-contact lens adhesion through complex interactions. Contact lens materials may also play an important role in the adherence of both genotypes of P. aeruginosa.

Corneal thickness after overnight wear of an intraocular pressure fluctuation contact lens sensor

To assess the effect of overnight wear of a contact lens-based sensor (CLS) for monitoring of 24-hr intraocular pressure (IOP) fluctuations on central corneal thickness (CCT). Changes in the CCT, mid-peripheral corneal thickness and central corneal radius (CCR) during overnight CLS wear in 20 eligible patients with ocular hypertension or established glaucoma were prospectively studied using ultrasound pachymetry and topography. Corneal thickness and CCR changes were evaluated from pre-to-postsleep, with the fellow eye as control. Paired t-test or Wilcoxon signed-rank test was used as appropriate and with α = 0.05. Relationship between the IOP profile recorded by the CLS and the pre-to-postsleep corneal thickness differences was assessed using the Spearman correlation coefficient. After CLS wear, mean CCT had changed from 523 to 537 μm (p = 0.015) in the study eye and from 518 to 522 (p = 0.206) in the fellow eye (n = 15). There was no difference in CCT change between eyes (p = 0.075). There were no statistically significant changes in horizontal or vertical CCR in either eye (p > 0.05 for all). No correlation was found between the pre-to-postsleep differences in the CLS signal and the pre-to-postsleep differences in ultrasound CCT measurements (p = 0.974). The continuous IOP monitoring does not appear to be affected by differences in corneal thickness that occur during overnight CLS wear, although the CLS did induce some corneal swelling. This effect was not statistically significantly different from the control eye and does not seem to influence the CLS IOP profile.

Estimating Tear Film Spread and Stability Through Tear Hydrodynamics

The stability and ease of spread of the tear-film over the contact lens surface may be an indicator of contact lens surface dewetting. The present in vivo methods of determining lens dewetting are complex. This study introduces a novel and objective way of determining the upward spread and stability of the tear-film through measurement of tear-film particle dynamics. Ten adapted contact lens wearers wore the same type of contact lens. Using a video camera mounted to a slit-lamp, the tear-film spread over the lens surface was recorded after a blink, at 8× magnification and capture rate of 30 frames per second, at morning after lens insertion, and after 8 h of lens wear. Images from 20 videos, without blinks and without an observable change in fixation were analyzed without any further postprocessing of the images. Using a customized calibrated ImageJ macro for particle tracking, the velocity of naturally occurring reflective particles was determined. The results were analyzed using the R program and ProFit. The results established that the upward particle velocity was highest immediately after a blink and declined with time. The spread of the tear film measured through upward particle velocity was different on lens insertion than after 8 h of lens wear (p = 0.001). The exponential time constants ± SE were 346.02 ± 29.0 for lens insertion at morning and 1413.13 ± 419.6 after 8 h of lens wear. A novel and non-invasive way to measure in vivo spread and stability of the prelens tear-film has been developed. Additional studies are needed to understand whether this simple measure is able to differentiate the performance of different soft contact lenses and how this method may help in the understanding other aspects of lens performance such as non-invasive tear breakup time, surface deposition, and lens comfort.

Quantification of protein deposits on silicone hydrogel materials using stable-isotopic labeling and multiple reaction monitoring

This study was designed to use multiple reaction monitoring (MRM) for accurate quantification of contact lens protein deposits. Worn lenses used with a multipurpose disinfecting solution were collected after wear. Individual contact lenses were extracted and then digested with trypsin. MRM in conjunction with stable-isotope-labeled peptide standards was used for protein quantification. The results show that lysozyme was the major protein detected from both lens types. The amount of protein extracted from contact lenses was affected by the lens material. Except for keratin-1 (0.83 ± 0.61 vs 0.77 ± 0.20, p = 0.81) or proline rich protein-4 (0.11 ± 0.04 vs 0.15 ± 0.12, p = 0.97), the amounts of lysozyme, lactoferrin, or lipocalin-1 extracted from balafilcon A lenses (12.9 ± 9.01, 0.84 ± 0.50 or 2.06 ± 1.6, respectively) were significantly higher than that extracted from senofilcon A lenses (0.88 ± 0.13, 0.50 ± 0.10 or 0.27 ± 0.23, respectively) (p < 0.05). The amount of protein extracted from contact lenses was dependent on both the individual wearer and the contact lens material. This may have implications for the development of clinical responses during lens wear for different people and with different types of contact lenses. The use of MRM-MS is a powerful analytical tool for the quantification of specific proteins from single contact lenses after wear.

Tear Film Surface Quality With Rigid and Soft Contact Lenses

The aim of this study was to measure tear film surface quality (TFSQ) using dynamic high-speed videokeratoscopy during short-term (8 hrs) use of rigid and soft contact lenses. A group of 14 subjects wore 3 different types of contact lenses on 3 different nonconsecutive days (order randomized) in 1 eye only. The subjects were screened to exclude those with dry eye. The lenses included a polymethyl methacrylate (PMMA) hard, a rigid gas permeable (RGP; Boston XO), and a soft silicone hydrogel lens. Three 30-second long high-speed videokeratoscopy recordings were taken with contact lenses in situ, in the morning and again after 8 hrs of contact lens wear, both in normal and suppressed blinking conditions. Recordings were also made on a baseline day with no contact lens wear. The presence of a contact lens in the eye had a significant effect on the mean TFSQ in both natural and suppressed blinking conditions (P=0.001 and P=0.01, respectively, repeated-measures analysis of variance). The TFSQ was worse with all the lenses compared with no lens in the eye in the afternoon during both normal and suppressed blinking conditions (all P<0.05). In natural blinking conditions, the mean TFSQ for the PMMA and RGP lenses was significantly worse than the baseline day (no lens) for both morning and afternoon measures (P<0.05). This study shows that both rigid and soft contact lenses adversely affect the TFSQ in both natural and suppressed blinking conditions. No significant differences were found between the lens types and materials.