Types Of Conductors Research Articles

Aynı anma gerilimlerine sahip farklı iletkenlerden oluşan yüksek gerilim kabloları üzerine bir araştırma

Aluminum and copper conductors are commonly used in the transport of energy. In this work, high-voltage cables occurring aluminum and copper conductors exposed to the same rated voltage values were analyzed. In order to obtain the same current carrying capacity for copper and aluminum conductors, the relationship between the cross-sections has been determined and then the most appropriate cross-sectional values for each conductor were identified. Three different cross-sectional values have been selected for each conductor type and the calculations for the cables were carried out by using the Cable Ampacity Calculations Program (CYMCAP) within the framework of the International Electrotechnical Commission (IEC) standards. The performance of the cables has been compared in terms of material losses, cable structures and the cable costs. It is seen from the simulation results that aluminum conductor cables have lower cost and higher electrical loses than the copper conductor cables.

(Invited) Electrolytes for Next-Generation Sodium Metal Batteries

Developing reliable and cost-effective electrical energy storage systems (EESs) for portable electronics, electric vehicles, and grid storage applications is vital. Na-ion batteries are the most promising alternative technology owing to their natural abundance and low sodium cost.[1] Solid-state batteries (SSBs) have garnered extensive attention for their ability to suppress the safety hazards of organic liquid electrolytes by replacing them with solid electrolytes.[2] Among the various solid electrolytes being explored, our group mainly focuses on NASICON (Sodium superionic conductor) type silicate and solid polymer electrolytes. Sodium silicates are a class of materials with composition, NaxMxSixOx (M = rare-earth metals, x = integer (1-10)).[3] They have the advantage of low sintering temperature (~1050 °C) and 3D framework structure containing MO6 octahedra and SiO4 tetrahedra providing facile ionic movement.[4] Solid polymer electrolytes (SPE) are known for their flexibility and electrode compatibility. Highly conductive, filler-free composite solid polymer electrolyte films were prepared using poly(vinylidene fluoride), poly(vinyl pyrrolidone) (PVP), and NaPF6.[5] PVP binder played an essential role in improving Na ion conductivity and excellent plating−stripping performance. This talk will present an overview of these solid electrolytes for next-generation sodium metal batteries.

Power loss analysis on the Tantui Atas distribution network using ETAP

The process of distributing electricity from power plants to consumers always experiences loss of energy or power losses. Power losses are unavoidable in the distribution network system and if it exceeds the percentage it will harm the distribution network system manager in terms of power or energy distribution. There are two types of shrinkage in the electric power system, namely technical and non-technical shrinkage. Technical depreciation is depreciation that occurs as a result of impedance on generation equipment and distribution equipment in transmission and distribution so that there is lost power. This research is Survey Research, where no changes are made or there is no special treatment of the variables studied. The types of data needed to analyze this calculation are: SLD data, transformer capacity, transformer load, channel length data, conductor type and capacity. The variable used in analyzing the results of this study is the power losses in the Upper Tantui penyulang. Based on the simulation results and also the analysis of the power losses on the Upper Tantui repeater, it can be concluded that the value of power losses during WBP conditions is still in normal conditions, which is below the SPLN standard of 5%, while in the installed load conditions the value of power losses has exceeded the normal limit according to SPLN standards, which is above 5%, where in the installed load conditions the value of power losses has reached 5.48%.

Preparation and performance evaluation of low temperature SOEC using lithium compounds as electrodes

Previous studies have found that in ceramic fuel cells using Ni0·8Co0·15Al0·05LiO2 (NCAL) as the electrode, lithium compounds such as LiOH generated by reduction of NCAL anode by H2 diffuse into oxide electrolyte membranes such as Gd0.1Ce0·9O2 (GDC), and the “GDC-lithium compounds” composite electrolyte formed online is an excellent proton conductor. In this paper, the low-temperature electrolysis performance of proton conductor type solid oxide electrolysis cell (P-SOEC) with GDC as electrolyte and NCAL as electrode for direct electrochemical conversion of H2O into H2 was investigated. It is found that at operation temperature of 550 °C, the current density of the SOEC prepared in this paper can reach 2.263 A cm−2 at 1.6 V. The composite electrolyte in the electrolysis cell reaches an ionic conductivity of 0.572 S cm−1 in the SOEC mode. The excellent hydrogen production performance proves that this new type of electrolysis cell with lithium compounds as electrodes is a promising and potential proton conductive low-temperature SOEC.

Optimal Selection of Conductors in Distribution System Designs Using Multi-Criteria Decision

The growth in the demand for electrical energy, which is driven by the constant growth of the metropolises and the expansion of the productive capacities of the industrial sector, entails the inevitable development of the electrical system to satisfy all the required demands in a convenient, efficient, and reliable manner. In this scenario, power distribution companies will continue to need to expand their electrical systems in the short and medium term to obtain the lowest investment and operating prices for the period considered in the analysis horizon. The expansion of the system can be projected statically or dynamically, which depends on the criteria that each distributor, in turn, applies in their expansion projects. Multi-criteria decision making can provide deeper analysis perspectives considering infinite possibilities for optimal network sizing and the technical, operational, quality of service, and even system reliability factors. This research proposes a multi-criteria decision technique based on the CRITIC method to determine the optimal design of an electrical distribution system. For this purpose, several design scenarios are defined with different types of electrical conductors, and the power flows are calculated in each. From these simulations, the results obtained in voltage profiles, namely active and reactive power losses, current levels, and the costs associated with the conductors used, are recorded. With the multi-criteria technique, the winning alternative is the design scenario containing the best joint solutions for the analysis variables. The proposed methodology is validated in an IEEE 34-bar test system. The Matpower tool, available through Matlab, generates power flows for each proposed design case. The results obtained in the analysis variables are generated and stored in a decision matrix of 210 alternatives. The proposed method represents a novel and powerful alternative for design proposals of distribution systems considering quality, efficiency, and cost criteria.

Design Evolution of MADMAX Conductor to a Nb–Ti Cable in Copper Conduit

The MADMAX (MAgnetized Disc and Mirror AXion) project aims at detecting axion dark matter in the mass range around 100 μeV. Prerequisite for success is a very large dipole (1.35 m warm bore) with a high magnetic field up to 10 T. A first conductor design made of Nb-Ti Rutherford Cable On Conduit Conductor with a hole in the copper conduit (RCOCC type) was already presented. The coolant is static bath of superfluid helium at 1.8 K. Unfortunately, no conductor manufacturer with an available production line was found to take in charge the cable insertion/soldering process. Actually, such a production line should be compatible with large conductor section (∼400 mm²) including a solder wave device. The type of conductor was changed to use a line developed for ITER Cable In Conduit Conductor (CICC). Nevertheless, the jacket part was kept in copper. The main evolution of the MADMAX conductor design is presently reviewed. The final outer dimensions of the conductor, the void fraction and the required cold work of the copper induces a reverse engineering challenge on the initial shape of the copper profile. Then, the cable geometry modification involves a lots of differences in terms of self-field, strand diameters, transposition paths, joints technique and conductance between the strands and the stabilizer. The mechanical aspects are subject to evolution for the project due to the magnetic design optimization and conductor type change. A sub-modeling approach is used to detail the stress level in the stabilizer jacket. The possibility of wire motion and wire deformation during the conductor compaction in the production line is also discussed. Concerning the thermal analysis, the major difference is the thermo-hydraulic quench back that induces a much higher pressure drop of the helium in the conduit. So, higher pressure induced higher helium velocity and a fast detection after a quench event in superfluid environment becomes possible.

Li2GeS3: Lithium Ionic Conductor with an Unprecedented Structural Type.

Lithium-ion batteries (LIBs) are widely used in electric vehicles, mobile electronic devices, and large-scale stationary energy storage systems. However, their liquid electrolytes present significant safety concerns due to their inherent flammability. To address this, the focus has shifted toward all-solid-state batteries (ASSBs) utilizing inorganic solid electrolytes that promise enhanced safety. In this work, we report the discovery of a new crystal structural type of Li-ion conductor, Li2GeS3, with a unique structure, synthesized by a solid-state reaction from Li2S and GeS2. It was first reported in 2000 with an orthorhombic unit cell, but its detailed crystal structure remains veiled. We have unveiled its structure for the first time, employing an ab initio structure determination technique from powder X-ray and time-of-flight neutron diffraction data. The compound has an unprecedented crystal structural type with a hexagonal P61 symmetry and a unit cell of a = 6.79364(4) Å and c = 17.90724(14) Å. Its structure is comprised of a distorted hexagonal close-packed arrangement of sulfur anions with three asymmetric metal atoms: Li1, Li2, and Ge are in tetrahedral cavities surrounded by sulfur atoms. The ionic conductivity of Li2GeS3 was measured to be 1.63 × 10-8 S cm-1 at 303 K and 2.45 × 10-7 S cm-1 at 383 K. Bond valence energy landscape calculations revealed three-dimensional lithium diffusion pathways within the structure. This novel crystal structure in Li2GeS3 holds the potential for developing high-performance ionic conductors through suitable chemical substitution and offers valuable insights into designing new ionic conductors for ASSBs.

An Enduring Na-Ion Solar Battery Configured with Na2Co0.5Ni0.5Fe(CN)6 Positive and NaTi2(PO4)3 Negative Electrodes in Na2SO4-SiO2 Hydrogel Electrolyte

A successful solar energy storage is accomplished in a 5 V/5 mAh rated Na-ion battery, which is customized by series connection of three 1.8 V unit cells. The unit cell is constructed with open framework structured Na2Co0.5Ni0.5Fe(CN)6 positive and Natrium Super Ionic CONductor (NaSICON) type NaTi2(PO4)3 negative electrodes in 1 M Na2SO4-SiO2 hydrogel electrolyte. Both positive and negative active materials demonstrate Faradaic charge storage mechanism with appreciable diffusion coefficients, such as 5.17 × 10−15 and 1.13 10−15, respectively. The Na2Co0.5Ni0.5Fe(CN)6//NaTi2(PO4)3 full cell depicts a specific capacity of 48 mAh g−1 (@ 100 mA g−1), an energy density of 95.68 Wh kg−1 (@ 259.96 W kg−1) and a power density of 779.75 W kg−1 (@ 54.36 Wh kg−1). The cell also exhibits an excellent durability, i.e., 93% capacity retention with 99% Columbic efficiency at 200 mA g−1 upon 1000 cycles. However, the 5 V battery is performance tested under solar-charging cum constant-load-discharging experiment for one-month, and the device describes 85% capacity retention over the period. The good power capability and cycle life with moderate energy density make this battery chemistry suitable for solar energy storage applications.

Stretchable and Self-Healable Fiber-Shaped Conductors Suitable for Harsh Environments.

Fiber-shaped conductors with high electrical conductivity, stretchability, and durability have attracted increasing attention due to their potential for integration into arbitrary wearable forms. However, these fiber conductors still suffer from low reliability and short life span, particularly in harsh environments. Herein, a conductive, environment-tolerant, stretchable, and healable fiber conductor (CESH), which consists of a self-healable and stretchable organohydrogel fiber core, a conductive and buckled silver nanowire coating, and a self-healable and waterproof protective sheath, is reported. Such a multilayer core-sheath design not only offers high stretchability (≈2400%), high electrical conductivity (1.0 × 106 S m-1 ), outstanding self-healing ability and durability, but also possesses unprecedented tolerance in harsh environments including wide working temperature (-60-20 °C), arid (≈10 % RH (RH: room humidity)), and underwater conditions. As proof-of-concept demonstrations, CESHs are integrated into various wearable formats as interconnectors to steadily perform the electric function under different mechanical deformations and harsh conditions. Such a new type of multifunctional fiber conductors can bridge the gap in stretchable and self-healing fiber technologies by providing ultrastable electrical conductance and excellent environmental tolerance, which can greatly expand the range of applications for fiber conductors.

Design and Validation of Plate Earthing System for Equipment Earthing

Earthing system is an essential part of electrical installation as it helps in eliminating electrical shock hazards and also provide zero voltage reference point for the equipment. Design of an earthing system involves, measurement of soil resistivity of the proposed site for the electrode system installation & determining the conductor type & required number of earth electrodes in order to achieve earth resistance value. This paper describes the methodology followed in design and validation of a plate electrode earthing system for the equipment earthing in a new test laboratory, which had an earth resistance requirement of less than 1 Ohm as mandated by the equipment supplier. This will be helpful for personnel involved in the design of earthing system.

Studi Rekonfigurasi Jaringan Distribusi 20 kV pada Penyulang DPRD ULP Cianjur Kota Menggunakan ETAP

In the distribution of electricity from electric power sources to consumers who are located far apart, they always experience losses, namely in the form of voltage drops and power losses. However, the voltage loss that occurs in the process of distributing electrical energy is a waste of energy if it is not controlled optimally. Concerning the quality of service, the main factor which becomes the benchmark is the continuity of service and the quality of service voltage. The impact of these losses results in low levels of service quality to customers. Analysis of voltage drop and power loss is needed to determine the size of the voltage drop at the end of the DPRD feeder network. The calculation of voltage drops and power loss uses simulation results of ETAP method. The results of mathematical calculations and simulations are analyzed to determine the factors that cause the voltage quality at the end of the DPRD feeder network to be below the standard service voltage of 20 kV. The results of the analysis and simulation show that the factors that cause the voltage quality at the end of the DPRD feeder to be below the standard of service quality level are the transformer loading system, the type of conductor, and the distance of the substation to the far end of the feeder network. Then the problem was resolved by changing the type of conductor and reconfiguring it by shifting part of the load to the Lampegan feeder so that the voltage profile at the end of the DPRD Feeder was initially 17.527 kV after reconfiguration increased to 18.137 kV.

Bismuth Telluride Nanoplates Hierarchically Confined by Graphene and N-Doped C as Conversion-Alloying Anode Materials for Potassium-Ion Batteries.

Potassium-ion batteries (PIBs) have broad application prospects in the field of electric energy storage systems because of its abundant K reserves, and similar "rocking chair" operating principle as lithium-ion batteries (LIBs). Aiming to the large volume expansion and sluggish dynamic behavior of anode materials for storing large sized K-ion, bismuth telluride (Bi2 Te3 ) nanoplates hierarchically encapsulated by reduced graphene oxide (rGO), and nitrogen-doped carbon (NC) are constructed as anodes for PIBs. The resultant Bi2 Te3 @rGO@NC architecture features robust chemical bond of Bi─O─C, tightly physicochemical confinement effect, typical conductor property, and enhanced K-ion adsorption ability, thereby producing superior electrochemical kinetics and outstanding morphological and structural stability. It is visually elucidated via high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) that conversion-alloying dual-mechanism plays a significant role in K-ion storage, allowing 12 K-ion transport per formular unit employing Bi as redox site. Thus, the high first reversible specific capacity of 322.70mAhg-1 at 50mAg-1 , great rate capability and cyclic stability can be achieved for Bi2 Te3 @rGO@NC. This work lays the foundation for an in-depth understanding of conversion-alloying mechanism in potassium-ion storage.

Effect of sintering and annealing on electrochemical and mechanical characteristics of Na3Zr2Si2PO12 solid electrolyte

AbstractNASICON (Sodium superionic conductor) type Na3Zr2Si2PO12 (NZSP) has received a lot of interest as the solid electrolyte for all‐solid‐state sodium‐ion batteries (ASSIBs). The electrolyte has superior interfacial characteristics, high thermal stability, and good ionic conductivity. Because of their higher energy density, improved mechanical stability, no liquid leakage problem, and higher operating voltages, All solid‐state batteries are expected to replace liquid electrolyte‐based batteries in many applications. The solid electrolyte also acts as a separator, and hence additional separator is not required for cell operations. Because of its 3D open architecture and continuous diffusion channels, NZSP is considered a better solid electrolyte. The NZSP solid electrolyte has been synthesized by spark plasma sintering (SPS) followed by annealing the sintered materials. The SPS method leads the material to have higher density and ionic conductivity. Conventional sintering of the materials requires a temperature as high as 1225°C; however, the temperature required for the SPS is as low as 1050°C. Moreover, conventional sintering yields samples of relative density up to 91%, while SPSed samples have achieved a maximum density of around 98%. The ionic conductivity of solid electrolyte SPSed at 1050°C for 10 min is found to be 3.5 × 10−4 S/cm with an activation energy of 0.27 eV. The annealing of the SPSed samples improves the ionic conductivity of the SPS1050‐20mins sample to roughly double the value obtained from the as‐prepared SPS sample because there are fewer secondary phases and a structural change from a rhombohedral to a monoclinic system. To ascertain the samples' crystal structure, particle shape, and ionic conductivity, materials were characterized using X‐ray diffraction, scanning electron microscopy, and electrochemical impedance spectroscopy. The samples' mechanical characteristics, for example, the hardness and fracture toughness of the samples, were also determined.

High thermoelectric properties of Cu2Te[sbnd]Ag2Te composite with Fe addition and non-stoichiometric Te

Cu2Te-based materials are a type of superionic conductor belonging to the class of phonon-liquid electron-crystal materials and have achieved high ZT values by doping and nanostructuring. However, it is easy to form copper vacancies in Cu2Te which leads to an excessive carrier concentration and then results in a low Seebeck coefficient. Hence, controlling copper ion migration and optimizing carrier concentration is essential to improve the thermoelectric performance of Cu2Te. This paper reports high-performance Cu2TeAg2Te composite with high application value in the low-middle temperature region, which is achieved by fine tuning the carrier concentration using Fe addition and non-stoichiometric Te, as well as controlling the thermal conductivity of composite. A high ZT of ∼1.2 is obtained in AgCu0.97Fe0.03Te0.96 at a low temperature of 573 K. Meanwhile, the phase transition mechanism of Cu2TeAg2Te and its effect on the thermoelectric transport performance are revealed that go beyond nanostructuring and single-doping, which provides a strong theoretical basis for research and performance improvement of thermoelectric materials in this system.

Development of the “Conductor Type Human Resources Development” program for Disaster Medicine and Health Care by Tohoku University and Fukushima Medical University

Introduction:On March 11, 2011, the Great East Japan Earthquake with a 9.0 magnitude struck the northeastern coast of Japan. The death toll reached 15,892 and 2,576 people were reported missing. Tohoku University and Fukushima Medical University, both of which are located in the affected prefectures, responded massively to the disaster.Method:To deal with the next disaster, both universities established the “Conductor type Human Resources Development” (CHRD) program for Disaster Medicine and Health Care in 2019, not only for doctors, but also other medical professionals (such as dentists, nurses, pharmacists, etc.) supported by the Japanese government. The main course of CHRD program, “Disaster Management course,” which is also a certification program at Tohoku University, comprises 14 practical educational contents (seven practical trainings and seven lectures) based on the work experience of both universities in collaboration with various organizations.Results:To date, 59 students have enrolled in the Disaster Management course, two students are enrolled in the board-certified physician in public health and social medicine acquisition course, three students are enrolled in the master's course, a Tohoku University Graduate School of Medicine course, and two students are enrolled in the doctoral course. Until October 2022, a total of 17 people were certified to have completed the "Disaster Management course," and one person completed the board-certified physician in public health and social medicine acquisition course. A total of 68 practical trainings and lectures were held until 2021, the total number of times this program was attended by students until 2021 was 916. Average comprehension rate and satisfaction rate with practical trainings and lectures by students are 97.2% and 98.3%, respectively.Conclusion:All the students who complete the CHRD program are believed to acquire comprehensive skills related to disaster health and medical care and will be able to respond effectively in all phases.

Compositing effects for high thermoelectric performance of Cu2Se-based materials

Thermoelectric materials can realize direct conversion between heat and electricity, showing excellent potential for waste heat recovery. Cu2Se is a typical superionic conductor thermoelectric material having extraordinary ZT values, but its superionic feature causes poor service stability and low mobility. Here, we reported a fast preparation method of self-propagating high-temperature synthesis to realize in situ compositing of BiCuSeO and Cu2Se to optimize the service stability. Additionally, using the interface design by introducing graphene in these composites, the carrier mobility could be obviously enhanced, and the strong phonon scatterings could lead to lower lattice thermal conductivity. Ultimately, the Cu2Se-BiCuSeO-graphene composites presented excellent thermoelectric properties with a ZTmax value of ~2.82 at 1000 K and a ZTave value of ~1.73 from 473 K to 1000 K. This work provides a facile and effective strategy to largely improve the performance of Cu2Se-based thermoelectric materials, which could be further adopted in other thermoelectric systems.

Energy Saving Transmission Line Evaluation Based on Mechanical and Electrical Characteristics Analysis

In order to improve the safety and reliability of transmission lines in certain areas, an energy-saving line selection scheme based on mechanical and electrical characteristics analysis is proposed. We determine the structural technical parameters and system conditions of the new energy-saving conductor through specific cases. In the mechanical characteristics, the dynamic stress, safety factor and the maximum sag of four different types of conductors during galloping are compared; In electrical characteristics, the current carrying capacity and resistance loss are mainly calculated. Finally, the economic and social benefits of energy-saving conductor are analyzed in combination with the specific project situation, and the specific precautions in the conductor selection process are analyzed, which provides a technical reference for the design, selection and application of energy-saving conductor.

New Approach for Ampacity Calculation of Overhead Lines With Steel-Cored Conductors

Due to increasing energy demand and penetration of renewable energy sources into the grid, the transmission system has often been operated closer to its operating limit. This scenario requires the accurate calculation of the lines' ampacity in order to ensure their safe operation and the full use of their capacity. This paper proposes a new approach for calculating the ampacity of overhead lines with steel-cored conductors, using an accurate resistance calculation model in a straightforward way. The alternating current (AC) resistance of this type of conductors can be affected by the core magnetization depending on factors such as the number of aluminum layers and the core magnetic properties, which are properly considered using the proposed model. Results for the conductor AC resistance variation with the carried current value and the ampacity for different scenarios are presented and compared with those obtained using the resistance calculation models proposed in ampacity calculation methods by IEEE and CIGRE´ . Results show that the lines' ampacity tends to be underestimated using the existing models. However, for conductors with one aluminum layer, the IEEE method may overestimate the line's ampacity by considering a constant conductor resistance value, bringing risks of accidents due to conductor overheating.

Corona current and audible noise characteristics of HVDC transmission lines and their relationship at high‐altitude

AbstractThe audible noise (AN) of HVDC transmission lines, as an external manifestation of the corona discharge, intensifies with the increase of altitude. In high‐altitude area, the AN has been a key factor in determining the type of conductors for transmission lines. In order to study the characteristics of corona current and AN of HVDC transmission lines at high‐altitude, we erected a HVDC test line at an altitude of 4300 m, and carried out AN and corona current tests under different voltages. Through the test, the basic data of AN and corona current of HVDC test line at high‐altitude were obtained. Based on the corona current curve, the corona inception electric field strength of the conductor was proposed. The relationship between the equivalent A‐weight sound level and the high‐frequency noise component was clarified. The relational expression of the AN and corona current for the HVDC test line were suggested. The research results show that, there is a relatively fixed difference of about 7–8.3 dB between the equivalent A‐weight sound level and the 8 kHz sound pressure level at altitude 4300 m, and a clear logarithmic relationship between the equivalent A‐weight sound level and the average value of the corona current.

Evaluating the Rate-determining Steps of Oxygen Permeation in Ba<sub>0.5</sub>La<sub>0.5</sub>FeO<sub>3−</sub><i><sub>δ</sub></i> Perovskite

Perovskite oxides obtained from Ba1−xLaxFeO3−δ (BLF) are considered beneficial materials for electrodes of solid oxide fuel cells and oxygen permeation membranes because of their high oxygen permeability, which is a criterion of oxide ion (O2−)-electronic mixed conductivity. In this paper, the prime focus was to understand the oxygen permeation mechanism through surface exchange and bulk diffusion of the Ba0.5La0.5FeO3−δ (BLF55) sample. The permeated oxygen flux displayed higher than that of the typical mixed conductor La0.6Sr0.4Co0.2Fe0.8O3−δ (LSCF), which was explored simultaneously with corresponding oxygen chemical potentials employing an especial experimental setup. This study found that the surface exchange reaction on the oxygen-lean side was the rate-determining step (RDS) of the oxygen permeation below 800 °C, resulting from lower hole concentration on the oxygen-lean side surface. Enhancing the charge transfer from the surface oxygen by increasing hole concentration is a prime important strategy to improve the surface exchange reaction.