Types Of Materials Research Articles

Perovskite photovoltaic effect and its application on solar cell

Significant attention has been attracted by perovskite photovoltaic materials due to their excellent monochromatic incident photon-to-electron conversion efficiency. This article will provide an overview of the fundamental principles of perovskite photovoltaic effects, the various types of perovskite photovoltaic materials, their optoelectronic properties, key factors influencing the performance of perovskite photovoltaics, and the current situation as well as future challenges of perovskite solar cells. It emphasizes that the continuous tunability of perovskite structure is pivotal in achieving highly efficient photoelectric materials. Doping and interface design plays a substantial role in enhancing the performance of perovskite solar cells. Finally, the article offers a glimpse into the prospects of commercial applications and potential research directions of perovskite photovoltaic materials. This article serves as a valuable reference for further comprehension and development of efficient and stable perovskite photovoltaic materials, paving the way for advancements in renewable energy technology.

Characterising bioactive components of green‐lipped mussel via two extraction methods: in vitro assessment of antioxidant and immunomodulatory effects

SummaryThis study investigates the benefits of green‐lipped mussels containing bioavailable PUFAs and inflammation‐modulating oil extracts. The goal is to find the best method for extracting lipids from two types of raw materials with strong immunomodulatory, anti‐inflammatory and antioxidant properties using organic solvents and supercritical carbon dioxide (CO2) techniques. The lipid classes are analysed using TLC‐FID and GC–MS to detect FFAs, while DPPH determines antioxidant levels. The cytokine production of IL‐6 and TNF‐α in LPS‐stimulated mouse macrophages is measured using ELISA. The results show that while supercritical CO2 is the most effective method for extracting lipids, the content can vary depending on the source and technique. The major FFAs found include EPA, Palmitic acid, DHA, and Palmitoleic acid, with PUFAs, particularly omega 3, being the most dominant. Samples exhibit potent radical scavenging in 2000 μg mL−1, similar to ascorbic acid at 62.5 μg mL−1 (62.2 ± 15.36%). The cells release more TNF‐α than IL‐6, and solvent extraction was found to regulate the immune response more effectively. In conclusion, the extracts contain significant amounts of EPA/DHA and variable FFAs, suggesting potential anti‐inflammatory effects. However, further validation in alternative in vitro models is necessary.

The current state of transition metal-based electrocatalysts (oxides, alloys, POMs, and MOFs) for oxygen reduction, oxygen evolution, and hydrogen evolution reactions

Climate change is showing its impacts now more than ever. The intense use of fossil fuels and the resulting CO2 emissions are mainly to blame, accentuating the need to develop further the available energy conversion and storage technologies, which are regarded as effective solutions to maximize the use of intermittent renewable energy sources and reduce global CO2 emissions. This work comprehensively overviews the most recent progress and trends in the use of transition metal-based electrocatalysts for three crucial reactions in electrochemical energy conversion and storage, namely, the oxygen evolution (OER), oxygen reduction (ORR), and hydrogen evolution (HER) reactions. By analyzing the state-of-the-art polyoxometalates (POMs) and metal-organic frameworks (MOFs), the performance of these two promising types of materials for OER, ORR, and HER is compared to that of more traditional transition metal oxides and alloy-based electrocatalysts. Both catalytic activity and stability are highly influenced by the adsorption energies of the intermediate species formed in each reaction, which are very sensitive to changes in the microstructure and chemical microenvironment. POMs and MOFs allow these aspects to be easily modified to fine-tune the catalytic performances. Therefore, their chemical tunability and versatility make it possible to tailor such properties to obtain higher electrocatalytic activities, or even to obtain derived materials with more compelling properties towards these reactions.

A New Name for Plants Previously Called Parablechnum christii (Blechnaceae) in Costa Rica and Panama

The name Parablechnum christii (C. Chr.) Gasper & Salino has been applied to a small species with few pairs of short pinnae that is endemic to Costa Rica and Panama. After reviewing type material of this name, we conclude that it has been misapplied and is, in fact, a synonym of P. falciforme (Liebm.) Gasper & Salino, an older name. Because the specimens previously identified as P. christii lack a name, we propose P. talamancanum S. Molino & R. C. Moran for these plants. The species is endemic to the mountains of Costa Rica and Panama, from 1200 to 3350 m.

Redescription of Astylus atromaculatus (Blanchard, 1843) a taxonomic contribution to the Neotropical species of the genus Astylus (Coleoptera: Melyridae)

Astylus atromaculatus (Blanchard, 1843), the most widely distributed taxon of the genus, is redescribed. The original description is based mainly on the coloration patterns of the elytra. The study of the external morphological characters and genitalia of the type material and from specimens of collections allows the establishment of a new synonymy between A. atromaculatus and A. atromaculatus var. duodecimmaculatus. Geographic distribution data is provided for the taxon are provided.

Analysis of road construction waste generation in developing economies: A focus on surfacing and sub-base construction projects in Sri Lanka

The motivation for this study was to develop simplified tools to estimate material wastage during road construction projects. In developing countries, there is a lack of information about material wastage factors (MWFs) in road construction projects. The purpose of this study is to reveal the MWFs of materials used in road construction. To investigate MWFs, statistics were collected from a sample of 58 road contracts concluded in the southern province of Sri Lanka, comprising 245 road construction projects. Of the selected sample, 80% of the road projects utilized wearing course (asphalt concrete), aggregate base course (ABC), cationic slow setting emulsion 1 (CSS1) and sand. The mean MWFs were calculated only for ABC, wearing course and CSS1 as 8.69%, 5.21% and 6.8%, respectively, because the authors could only achieve acceptable precision levels for these three types of materials. The coefficient of variation (CV) for all these three types of materials ranged from 25% to 3%. Based on collected data, this study proposes equations to predict waste generation for CSS1 and wearing course. Implementing the derived equations to predict waste generation can aid in efficient planning and help construction companies to move towards more sustainable practices.

Diamond-Like Carbon (DLC) Coatings : Classification, Properties, and Applications

This paper presents the most recent and important research trends on the friction and wear properties of diamond like carbon (DLC) coatings deposited on different types of materials. For this the invention, methods, techniques, and design related to this area are discussed. The different trends of tribological properties of materials under different operating conditions are observed. In this article, an attempt is made to provide an opportunity for the future researchers to identify the recent trend of these areas. It is expected that the applications of these results will contribute to the improvement of different concerned mechanical processes. This review article also includes some patents relevant to the method of producing a DLC film.

Torrefaction and hydrothermal carbonization of waste from the paper industry: Effects of atmosphere choice and pretreatment with natural acidic reagent on fuel properties

The hydrothermal carbonization (HTC) and torrefaction of paper sludges and biological sludges from the paper industry were investigated and the effect of pretreatment of the samples with alcoholic vinegar was evaluated. The HTC was performed at two different reaction times, while the torrefaction took place at two different temperatures and two atmospheres. The gas analysis showed that the optimal torrefaction time for the N2 atmosphere can be determined by observing the CO2 content in the gas phase, which is not possible for the CO2 atmosphere. The TGA analysis showed that the choice of atmosphere influences further combustion, with samples torrefied at lower temperatures being more sensitive to it. The carbon (C) content in the thermally treated samples increases from 39.85 to 48.06 wt% for biological sludge and from 40.02 to 60.21 wt% for paper sludge. The H/C and O/C ratios decrease and approach the values of conventional fuels. The fuel ratio is higher for the torrefied samples. The higher heating value (HHV) increased from 17.4 to 21.4 MJ/kg for biological sludge and from 16.2 to 22.4 MJ/kg for paper sludge. Higher temperature and longer treatment time led to products with a higher HHV and a higher energy density. The highest energy yields were achieved during torrefaction at 250 °C, regardless of the atmosphere, with temperature and type of material having the greatest influence. Acidification of the samples or acidic media in the HTC affects the properties of the products by increasing the C content and HHV and affecting combustion.

On the intrinsic recycling potential of carbon-based materials and products; an assessment method and outlook

In this paper we investigate the market size of all materials and products presently produced from (organic) carbon and we present a method to estimate the intrinsic recycling potential of these materials/chemicals as a function of their respective applications. The method is based on the expert assessment of a number of variables that are important within the different application categories and markets of the carbon-based materials/chemicals. Applying the method, the paper presents the recycling potential of all carbon-based products. Following, an estimation of the amount of new products that can be produced each year through recycling of discarded products is presented and the amount of carbon that needs to come from other sustainable sources to fulfil our demand for new products is calculated.We distinguish nine different categories of (organic) carbon-based materials/chemicals: plastics, textile fibres, thermoset resins, rubbers, surfactants, solvents, fine chemicals, paper/board and wood products. Within these nine categories the most important materials/chemicals types were taken into account. Fossil-based and bio-based materials/chemicals were assessed separately. For each of the materials/chemicals types, the market size in terms of mass (Mt) was calculated for the main applications in which they are applied. Next, for all materials/chemicals types in these applications, the maximum recycling potential, in case mechanical or physical recycling methods are applied, was assessed, using an expert panel. Also, inevitable leakage of materials/chemicals in the different applications was assessed. Finally, the amount of feedstock coming from recycling streams that may be made available for chemical recycling or carbon capture and utilisation technologies was derived. From this, the magnitude of carbon-based materials/chemicals that need to be replaced each year by other renewable feedstock than recycled content in terms of Mton carbon was calculated.The analysis is relevant in view of implementation of a circular economy and reuse and recycling of materials, to combat depletion of raw materials. Next, it is relevant in view of phasing out fossil-feedstock to combat climate change. Our analysis indicates that the recycling potential of carbon-based materials and products through mechanical or physical methods lies around 50%, even in a system that is fully optimised for recycling. Chemical recycling and carbon capture and utilisation may provide another 25% of the renewable-carbon feedstock needed, but they generally require far more energy and other inputs to produce new materials and chemicals than the mechanical and physical recycling methods. The remaining demand for renewable-carbon feedstock thus needs to come from either biomass or CO2 through carbon capture and utilisation technologies. Based on our findings, we argue that the composition of our present carbon-based products pool needs to be redesigned on a fundamental molecular level, towards material types that contain more oxygen. Carbon-based materials that contain more oxygen generally can be recycled more efficiently, and are also easier to produce from the alternative feedstocks biomass and CO2 through CCU.

Preparation of polyethylene elastomers with increased high molecular weight and nearly perfect strain recovery by steric control of asymmetric α-diimine nickel catalyst

The use of α-diimine nickel catalysts to prepare high molecular weight branched polyethylene has matured, but few work reports consider high branch density and ultrahigh molecular weight. Herein, through a combination of asymmetric and steric control strategies, series of catalysts with a gradual increase number of N-aryl ortho-benzhydryl substituent were prepared. Through the analysis of polymerization results, it is believed that large steric hindrance plays a significant role in improving the catalyst thermal stability and reducing the temperature sensitivity of the product branch density and molecular weight. Surprisingly, Ni4, which has three large benzhydryl groups and one small methyl group at the four sites of the N-aryl ortho-position, has high chain growth rate and strong chain walking ability, allows it to prepare highly branched polyethylene with ultra-high molecular weight at higher temperatures with high activity. Moreover, this type of polyethylene material exhibits excellent strain recovery capabilities (98.2 %).

“Confucius Institute” at Novosibirsk State University: Teaching Chinese Today

In 2023, the number of native Chinese language teachers at Novosibirsk State University and its partner universities in the Confucius Institute project returned to pre-pandemic levels, and the scale of educational activities and related projects such as a summer language camp in China were restored. The article discusses issues of staffing and measures in the field of improving the professional level of teachers, features of teaching Chinese language (ways of involving Chinese teachers in vocational, secondary and additional education programs, models of interaction between Chinese and Russian teachers such as joint classes, independent classes with separate presentation of different types of educational material within one course or teaching certain aspects of the Chinese language). The activities of the Confucius Institute in the field of holding competitions in the Chinese language and the results of students’ participation in competitions of various levels are also shown. Stimulating the competitive activity of students, according to the authors, is an important additional condition for the development of their language skills and achievements in competitions which indicate a high level of language training provided by the Confucius Institute centre.

Preparation and properties of gel-type low-temperature phase change materials

In the context of the dual‑carbon target, there is a high emphasis on the energy efficiency of traditional mechanical cold storage systems with significant power consumption. Additionally, the implementation of time-of-use electricity pricing has played a crucial role in driving the rapid advancement of energy storage technology. The application of energy storage technology in cold storage can significantly reduce the energy consumption of the refrigeration system, save operating costs by shifting peak demand to valleys, and reduce start and stop frequencies. Therefore, studying phase-change materials with high latent heat, low cost, and good performance for cold storage is of great practical application in cold storage. The paper developed four types of gel-type phase-change cold storage materials with high latent heat, low cost, and good cycle stability. These materials mainly consist of NH4Cl, KCl, and deionized water. The phase transition temperature ranges from −18 to −21 °C, the latent heat of phase change is approximately 260 to 289 J/g, and the thermal conductivity ranges from 0.58 to 0.60 W/(m·K), which can meet the cooling demand of cold storage facilities. Furthermore, by comparing the phase transition temperature, latent heat value of phase change, and cyclic stability, a gel-type PCM with good comprehensive properties was selected for corrosion and corrosion inhibition studies with five common metal samples in welded and non-welded forms. The results showed that material B2 had slight corrosion on 1060 aluminum, 6061 aluminum, and 304 stainless steels, but no obvious corrosion phenomenon was found on 316 stainless steels. The corrosion rate of the material on red copper was the highest, and the corrosion was too strong. In addition, the corrosion of welded parts is more serious than that of non-welded parts, and the welding points are more susceptible to corrosion. Adding the corrosion inhibitor BTA to material B2 can reduce the corrosion rate of red copper by more than 94 %.

Preparation of high‐barrier performance paper‐based materials from biomass‐based silicone‐modified acrylic polymer emulsion

Preparation of high‐barrier performance paper‐based materials from biomass‐based silicone‐modified acrylic polymer emulsion

A Biomimetic Multifunctional Scaffold for Infectious Vertical Bone Augmentation.

The regenerative treatment of infectious vertical bone defects remains difficult and challenging today. Current clinical treatments are limited in their ability to control bacteria and infection, which is unfavorable for new bone formation and calls for a new type of material with excellent osteogenic and antibacterial properties. Here a multifunctional scaffold is synthesized that mimics natural bone nanostructures by incorporating silver nanowiresinto a hierarchical, intrafibrillar mineralized collagen matrix (IMC/AgNWs), to achieve the therapeutic goals of inhibiting bacterial activity and promoting infectious alveolar bone augmentation in rats and beagle dogs. An appropriate concentration of 0.5mgmL-1 AgNWs is selected to balance biocompatibility and antibacterial properties. The achieved IMC/AgNWs exhibit a broad spectrum of antimicrobial properties against Gram-negative Porphyromonas gingivalis and Gram-positive Streptococcus mutans. When the IMC/AgNWs are cocultured with periodontal ligament stem cells, it possesses excellent osteoinductive activities under both non-inflammatory and inflammatory conditions. By constructing a rat mandibular infected periodontal defect model, the IMC/AgNWs achieve a near-complete healing through the canonical BMP/Smad signaling. Moreover, the IMC/AgNWs enhance vertical bone height and osseointegration in peri-implantitis in beagle dogs, indicating the clinical translational potential of IMC/AgNWs for infectious vertical bone augmentation.

Effects of water temperature on soil aggregate stability between soils developed from different parent materials in the subtropical hilly area of China

Water temperature has an important effect on soil aggregate stability. In this study, six soils derived from different parent materials in the hilly region of southern China were selected, and the mean weight diameter (MWD), geometric mean diameter (GMD), and soil erodibility (K value) were measured under different water temperature conditions. The aim of this study was to investigate the influence of water temperature on soil aggregate stability and erodibility. As the water temperature increased from 5 °C to 40 °C, the average content of >5 mm water-stable aggregates decreased by 57.13 %, while the average content of <0.25 mm water-stable aggregates increased by 214.41 %. The MWD and GMD of the six different parent soil types exhibited a decreasing trend with increasing water temperature. The trend of the K value was opposite to that of these values. The influence of water temperature on soil aggregate stability is mainly attributed to the thermal effect on the viscosity of soil water and the expansion of clay minerals. As the water temperature increases, the water viscosity coefficient, water density and water surface tension gradually decrease. Moreover, the response of soil aggregate stability and erosion resistance to water temperature varies with soil depth and parent material type. The topsoil exhibits greater sensitivity to water temperature than does the subsoil. Shale (SH) soils and quartz sandstone (QS) soils exhibited higher sensitivities, and Quaternary red clay (QRC) soils exhibited the lowest sensitivity to water temperature among the six soils. This difference is mainly attributed to differences in the contents of expansive clay minerals and organic matter. These results indicate that soil aggregate stability and erosion resistance decrease with increasing water temperature, which may be one reason for severe soil erosion under extremely high temperature and rainfall conditions in the southern red soil hilly region during summer.

Biaxial flexural strength of hydrothermally aged resin-based materials

PurposeThe strength of temporary restorations plays a vital role in full-mouth reconstruction, and it can be impacted by the aging process. The aim of this in vitro study was to evaluate the biaxial flexural strength and fractographic features of different resin-based materials submitted to thermal aging. Material and methodsOne hundred and ninety-two resin disc-shaped specimens (6.5 mm in diameter and 0.5 mm in thickness) were fabricated and divided into six experimental groups according to the resin-based materials (Filtek Bulk-Fill flowable resin; J-Temp temporary resin; and Fuji Lining glass ionomer cement) and aging process (before and after thermal cycling). Biaxial flexural strength test was performed using a universal testing machine at a crosshead speed of 0.5 mm/min before and after thermal cycling (5 °C and 55 °C, 5760 cycles, 30 s). The mechanical properties were assessed using Weibull parameters (characteristic strength and Weibull modulus) (n = 30). Fractured specimens were examined under a polarized light stereomicroscope to identify crack origin and propagation direction. The surface microstructure of the resin-based materials was assessed by scanning electron microscopy (n = 2). The Weibull modulus (m), characteristic strength, and reliability properties were calculated, and a contour plot was used to detect differences among groups (95% confidence interval). ResultsThe Weibull modulus (m), characteristic strength, and reliability of the resin-based compounds were influenced by material type and thermal aging (p < 0.05). Weibull modulus (m) revealed no differences when comparing the materials and aging process (p > 0.05), except for the preceding aging period where Filtek Bulk-Fill exhibited higher values compared to J-Temp (p < 0.05). Filtek Bulk-Fill demonstrated superior characteristic strength and reliability compared to J-Temp and Fuji Lining before and after thermal cycling (p < 0.05). Fractography of the resin-based materials showed fractures originating from surface defects exposed to tensile side and their propagation toward the compressive side. Generally, no differences in surface microstructure were observed on micrographs before and after thermal aging for Filtek Bulk-Fill and Fuji Lining. However, the aging process developed flaws in J-Temp. ConclusionResin-based material composition resulted in different flexural strength performance, impacting the Weibull modulus (m), characteristic strength, and reliability of the resin-based restorations.

Coordination cages integrated into swelling poly(ionic liquid)s for guest encapsulation and separation

Coordination cages have been widely reported to bind a variety of guests, which are useful for chemical separation. Although the use of cages in the solid state benefits the recycling, the flexibility, dynamicity, and metal-ligand bond reversibility of solid-state cages are poor, preventing efficient guest encapsulation. Here we report a type of coordination cage-integrated solid materials that can be swelled into gel in water. The material is prepared through incorporation of an anionic FeII4L6 cage as the counterion of a cationic poly(ionic liquid) (MOC@PIL). The immobilized cages within MOC@PILs have been found to greatly affect the swelling ability of MOC@PILs and thus the mechanical properties. Importantly, upon swelling, the uptake of water provides an ideal microenvironment within the gels for the immobilized cages to dynamically move and flex that leads to excellent solution-level guest binding performances. This concept has enabled the use of MOC@PILs as efficient adsorbents for the removal of pollutants from water and for the purification of toluene and cyclohexane. Importantly, MOC@PILs can be regenerated through a deswelling strategy along with the recycling of the extracted guests.

Highly efficient peanut shell activated carbon via hydrothermal carbonization and chemical activation for energy storage applications

In this study, the activated carbon samples from peanut shells (PS) are synthesized through hydrothermal carbonization (HTC) with and without activating agents, and their electrochemical properties are studied for supercapacitor applications. The raw precursor (PS) powder is loaded with an activating agent (ZnCl2 or H3PO4 or KOH) during the hydrothermal treatment at 200 °C for 7 h. The treatment with the activating agent facilitates the generation of oxygen-containing functional groups on the precursor surface, enhancing the porosity and electrochemical performance of the sample. Further, the samples are subjected to carbonization at 400 °C for 3 h. The powder XRD patterns show peaks at around 24–26° and 43°, corresponding to the amorphous and graphitic carbon, respectively. The morphological examination reveals more meso and macro pores when treated with the activating agent. Raman spectra manifest the amorphous carbon nature of the samples exhibiting ID and IG bands. The porous carbon treated with H3PO4 shows a specific surface area of 17.8 m2/g and a pore volume of 0.037 cm3g−1. The H3PO4 treated sample shows a high specific capacity (Cs) of 240 F/g at 1 A/g current density, an energy density (E) of 4.08 W h kg−1, and a power density (P) of 101.3 W kg−1. The Retention rate of the sample is approximately 90 % up to 1200 cycles. These types of hybrid supercapacitor materials are suitable for battery-type applications.

Unveiling potential of thiophene-functionalized C3N3 nanosheet as an anode for Li-ion batteries: A DFT-D3 study

Covalent triazine frameworks (CTFs) are a fascinating type of porous organic materials that exhibit numerous distinct features, such as significant specific surface area, outstanding chemical/thermal stability, and structural modifiability at the molecular level. These features make CTFs highly appealing for utilization in Li-ion batteries (LIBs). However, their low electronic conductivity limits their practical applications. In the present study, the potential anode application of thiophene-functionalized C3N3 nanosheet for LIBs was conducted by dispersion-corrected density functional theory (DFT-D3) calculations. It was found that functionalization of the C3N3 nanosheet with six thiophene groups ((THP)6@C3N3) led to the highest reduction (0.19 eV) in the energy gap of the pristine C3N3 nanosheet. A single Li-ion preferably adsorbs between two nitrogen atoms of the triazine ring with an adsorption energy of about 4.59 eV. The absorption of Li-ion resulted in a reduction of the band gap from 1.37 eV to 0.43 eV, indicating enhanced electrical conductivity and superior cycle stability. The fully loaded functionalized nanosheet with nineteen Li-ions at various adsorption sites exhibited a remarkable theoretical specific capacity of 526.55 mAh/g. This configuration also displayed a low open-circuit voltage (0.09 V) and diffusion energy barrier (0.35 eV), ideal as an anode with a rapid charging/discharging rate. Therefore, thiophene-functionalized C3N3 nanosheet demonstrates superior anode performance for LIBs due to its high theoretical specific capacity, small diffusion barrier, and low working voltage. This work can provide insights for the refere development of CTF-based anode materials.

Development of ions adsorption onto nanoparticles from water/wastewater sources via novel nanocomposite materials: A machine learning-based approach

In current decades, adsorption process of prevalent pollutants from water/wastewater source has been of paramount attention. To improve the efficiency of pollutants adsorption, various types of nanocomposite materials have been employed. The use of machine learning-based models is a highly effective and promising approach for analysing data obtained from experimental investigations. This study involves the use of three distinct regression models, namely K-nearest neighbours (KNN), Boosted multilayer perceptron (MLP), and Boosted K-nearest neighbours for the purpose of regression analysis on a limited dataset consisting of two inputs and two outputs. The input features are C0 (Initial concentration) and the type of ion, while the output parameters are Ce (equilibrium concentration) and Qe (adsorption amount). By utilizing these regression models, the study aims to extract useful insights from the available data. By tuning their hyper-parameters, the final models have been carried out, then, evaluated through various metrics. Boosted MLP and Boosted KNN both have R2-score values greater than 0.998. Also, when it comes to MAE (Mean absolute error), Boosted MLP shows 0.0755 for Ce which is more accurate than the other previously implemented methods. As a result, the Boosted MLP model illustrates the same optimized value with the dataset: (Ion = Nickel, C0 = 250, Ce = 206.0). Moreover, it is varied for Qe and equals (Ion = Mercury, C0 = 238.11, Ce = 528.52). The results indicated that machine learning models are promising in adsorption science for prediction and correlation of solute concentration data to optimize the process.