Types Of Biochar Research Articles

Enhancing the efficacy of biochar derived from crop residues on rice (Oryza sativa L.) dry matter, yield accumulation and soil organic carbon in Central Vietnam

Biochar from crop residues plays an important role in reclamation of degraded rice soil due to imbalance fertilizer application and soil carbon sequestration. The objective of this study aimed to evaluate the best type and rate of biochar application for rice dry matter and soil organic carbon improvement. Therefore, pot experiments were carried out in two seasons of spring and summer 2023 at the University of Agriculture and Forestry, Hue University. Twelve treatments including 2 types of biochar (rice husk and peanut shell) and 6 application rates (0, 1, 2, 3, 4, 5%) were used and arranged in a randomized block design with three replications. Research results showed that the shoot dry matter was higher 9.5 – 27.0% (spring season) and 19.1 – 26.9% (summer season) at a rate of 5% application in both types of biochar than control. Rice husk biochar application had higher shoot dry matter than peanut shell biochar application in the same application rate from 0.30 – 0.46 g/plant in both seasons. Similarly, organic carbon was found the highest content (2.15 - 2.21%) when the application of biochar from crop residues at a rate of 5%. Biochar from crop residues is considered as a good amendment for increasing crop dry matter and soil organic carbon.

Fire behaviour of biochar-based cementitious composites

The study aimed to test the hypothesis that biochar's unique properties, such as its microporous structure, can enhance concrete's resilience to high temperatures. Despite expectations of reduced crack formation and enhanced fire resistance, the experimental results revealed a limited impact on concrete's fire behaviour. The investigation involved the use of two biochar types, fine and coarse biochar as replacements for cement and aggregates, respectively. Fine biochar exhibited higher water absorption and Young's modulus than coarse biochar, but both resisted ignition at 35 kW/m2 radiative heat flux and had peak heat release rates below 40 kW/m2. Incorporating these biochars at varying weight percentages (10, 15, and 20 wt.%) into concrete led to a gradual decline in compressive and tensile strength due to reduced binding ability with increased biochar content. Exposure to 1000 °C compromised mechanical properties across all the samples. However, the biochar concrete maintained compressive strength (compared to the control) with up to 20 wt.% biochar as a fine aggregate substitute after exposure to 600 °C, and as a cement replacement after exposure to 200 °C. This substitution also yielded a significant reduction in CO2 emissions (50 % reduction as the biochar loading amount doubled) from concrete manufacturing, showcasing biochar's potential for sustainable construction practices. Despite not fully supporting the initial hypothesis, the study demonstrated biochar's viability in reducing carbon footprint while maintaining concrete strength under certain fire conditions.

Utilizing ragweed and oyster shell derived biochar as an effective stabilizer for the restoring Cd and Pb- contaminated soil

This study aimed to compare the effects of limestone and biochar amendments on heavy metal availability, soil fertility, and crop yield in cadmium (Cd) and lead (Pb) contaminated soil. A pot experiment with Chinese cabbage was conducted to evaluate two types of biochar derived from invasive plant (ragweed) and oyster shells for their potential in stabilizing Cd and Pb. The results showed that both biochar amendments significantly reduced the availability and uptake of Cd and Pb in soil and cabbage, comparable to the effects of limestone. Moreover, biochar amendment synergistically enhanced soil fertility, cabbage yield and quality. Application of ragweed-derived biochar at a 0.5% dosage consistently and most effectively promoted leaf biomass by 18% and 25% and increased vitamin C levels by 20% and 30% at harvest 1 and 2, respectively. Additionally, it led to a reduction in leaf content of nitrate by 26% and 37%, as well as a decline in Cd content by 41% and 21% and Pb content by 78% and 58%. Notably, despite the increased application cost, ragweed-derived biochar has far greater financial benefits than lime due to increased crop yield. These findings highlight the potential of employing natural and high-performance biochar with multiple functionalities, offering benefits not only in controlling invasive species and managing waste but also as a promising substitute for lime application, thereby contributing significantly to sustainable soil management.

Biochar addition can negatively affect plant community performance when altering soil properties in saline-alkali wetlands.

Biochar is a widely proposed solution for improving degraded soil in coastal wetland ecosystems. However, the impacts of biochar addition on the soil and plant communities in the wetland remains largely unknown. In this study, we conducted a greenhouse experiment using soil seed bank from a coastal saline-alkaline wetland. Three types of biochar, including Juglans regia biochar (JBC), Spartina alterniflora biochar (SBC) and Flaveria bidentis biochar (FBC), were added to the saline-alkaline soil at ratios of 1%, 3% and 5% (w/w). Our findings revealed that biochar addition significantly increased soil pH, and increased available potassium (AK) by 3.74% - 170.91%, while reduced soil salinity (expect for 3% SBC and 5%SBC) by 28.08% - 46.93%. Among the different biochar types, the application of 5% FBC was found to be the most effective in increasing nutrients and reducing salinity. Furthermore, biochar addition generally resulted in a decrease of 7.27% - 90.94% in species abundance, 17.26% - 61.21% in community height, 12.28% - 56.42% in stem diameter, 55.34% - 90.11% in total biomass and 29.22% - 78.55% in root tissue density (RTD). In particular, such negative effects was the worst in the SBC samples. However, 3% and 5% SBC increased specific root length (SRL) by 177.89% and 265.65%, and specific root surface area (SRSA) by 477.02% and 286.57%, respectively. The findings suggested that the plant community performance was primarily affected by soil pH, salinity and nutrients levels. Furthermore, biochar addition also influenced species diversity and functional diversity, ultimately affecting ecosystem stability. Therefore, it is important to consider the negative findings indirectly indicate the ecological risks associated with biochar addition in coastal salt-alkaline soils. Furthermore, Spartina alterniflora was needed to desalt before carbonization to prevent soil salinization when using S. alterniflora biochar, as it is a halophyte.

Nitrogen leaching mitigation by tithonia biochar (Tithochar) in urea fertilizer treated sandy soil

Abstract Nitrogenous fertilizer drift from farmlands accelerates nitrogen loads in groundwaters. Biochar potential to mitigate nitrogen leaching in urea treated sandy soil was monitored in a four weeks screenhouse leaching column experiment. The trial was a factorial combination of two biochar types (B1 and B2 applied at 5 t/ha) and two urea treatments (with urea at 120 kg/ha and without urea) laid in completely randomized design with three replications. Control that received neither urea nor biochar was compared. Four weekly leaching events were conducted in each leaching column containing 300 g soil amended with appropriate treatments. Amaranthus hybridus was the test crop. The NH4-N and NO3-N leached were generally highest during the week 2 leaching event such that total NO3-N leached was 427.3 % higher than total NH4-N leached with highest contributions from sole urea treatment. Biochar pretreatment reduced total N leached by 9.5 (B1) and 26.8 % (B2) relative to sole urea. Percentage of N added lost to leaching was highest (34.1 %) in sole urea treatment with B1 and B2 pretreatment reducing the value by 54.5 and 46.9 % respectively. Correlation analysis revealed electrical conductivity of the leachate and soil as dominant indicators for N leached in the soil studied.

Effects of Biochar on Growth and Pollutant Accumulation of Lettuce in Soil Co-contaminated with Tetracycline and Copper

Through lettuce potting experiments, the effects of different types of biochar (apple branch, corn straw, and modified sorghum straw biochar with phosphoric acid modification) on lettuce growth under tetracycline (TC) and copper (Cu) co-pollution were investigated. The results showed that compared with those under CK, the addition of biochar treatment significantly increased the plant height, root length, shoot fresh weight, and root fresh weight of lettuce (P < 0.05). The addition of different biochars significantly increased the nitrate nitrogen, chlorophyll, and soluble protein content in lettuce physiological indicators to varying degrees, while also significantly decreasing the levels of malondialdehyde, proline content, and catalase activity. The effects of biochar on lettuce physiological indicators were consistent during both the seedling and mature stages. Compared with those in CK, the addition of biochar resulted in varying degrees of reduction in the TC and Cu contents of both the aboveground and underground parts of lettuce. The aboveground TC and Cu levels decreased by 2.49%-92.32% and 12.79%-36.47%, respectively. The underground TC and Cu levels decreased by 12.53%-55.64% and 22.41%-42.29%, respectively. Correlation analysis showed that nitrate nitrogen, chlorophyll, and soluble protein content of lettuce were negatively correlated with TC content, whereas malondialdehyde, proline content, and catalase activity were positively correlated with TC content. The resistance genes of lettuce were positively correlated with TC content (P < 0.05). In general, modified biochar was found to be more effective in improving lettuce growth quality and reducing pollutant accumulation compared to unmodified biochar, with modified sorghum straw biochar showing the best remediation effect.

Effects of Modified Distillers' Grains Biochar on Cadmium Forms in Purple Soil and Cadmium Uptake by Rice

Biochar and modified biochar have been widely used as remediation materials in heavy metal-contaminated agricultural soils. In order to explore economical and effective materials for the remediation of cadmium (Cd)-contaminated acidic purple soil, distillers 'grains were converted into distillers' grains biochar (DGBC) and modified using nano-titanium dioxide (Nano-TiO2) to produce two types of modified DGBCs:TiO2/DGBC and Fe-TiO2/DGBC. A rice pot experiment was used to investigate the effects of different biochar types and application rates (1%, 3%, and 5%) on soil properties, nutrient content, Cd bioavailability, Cd forms, rice growth, and Cd accumulation. The results showed that:① DGBC application significantly increased soil pH, cation exchange capacity (CEC), and nutrient content, with TiO2/DGBC and Fe-TiO2/DGBC exhibiting better effects. ② DGBC and modified DGBCs transformed Cd from soluble to insoluble forms, increasing residual Cd by 1.22% to 18.46% compared to that in the control. Cd bioavailability in soil decreased significantly, with available cadmium being reduced by 11.81% to 23.67% for DGBC, 7.64% to 43.85% for TiO2/DGBC, and 19.75% to 55.82% for Fe-TiO2/DGBC. ③ DGBC and modified DGBCs increased rice grain yield, with the highest yields observed at a 3% application rate:30.60 g·pot-1 for DGBC, 37.85 g·pot-1 for TiO2/DGBC, and 39.10 g·pot-1 for Fe-TiO2/DGBC, representing 1.13, 1.40, and 1.44 times the control yield, respectively. Cd content in rice was significantly reduced, with grain Cd content ranging from 0.24 to 0.30 mg·kg-1 for DGBC, 0.16 to 0.26 mg·kg-1 for TiO2/DGBC, and 0.14 to 0.24 mg·kg-1 for Fe-TiO2/DGBC. Notably, Cd content in rice grains fell below the food safety limit of 0.2 mg·kg-1 (GB2762-2022) at 5% for TiO2/DGBC and 3% and 5% for Fe-TiO2/DGBC. In conclusion, Nano-TiO2 modified DGBC effectively reduced the bioavailability of soil Cd through its own adsorption and influence on soil Cd forms distribution, thus reducing the absorption of Cd by rice and simultaneously promoting rice growth and improving rice yield. It is a type of Cd-contaminated soil remediation material with a potential application prospect. The results can provide scientific basis for farmland restoration and agricultural safety production of Cd-contaminated acidic purple soil.

Greenhouse gas mitigation and soil carbon stabilization potential of forest biochar varied with biochar type and characteristics

Biochar is increasingly used in climate-smart agriculture, yet its impact on greenhouse gas (GHG) emissions and soil carbon (C) sequestration remains poorly understood. This study examined biochar-mediated changes in soil properties and their contribution to C stabilization and GHG mitigation by evaluating four types of biochar. Soil carbon dioxide (CO2) and nitrous oxide (N2O) emissions, soil chemical and biological properties, and soil organic carbon (SOC) mineralization kinetics were monitored using greenhouse, laboratory, and modeling experiments. Three pine wood biochars pyrolyzed at 460 °C (PB-460), 500 °C (PB-500), 700 °C (PB-700), and one pine bark biochar from gasification at 760 °C (GB-760) were added into soil at 1 % w/w basis. Soils amended with biochar were used to cultivate sorghum for three months in a greenhouse, followed by three months of laboratory incubation. Data obtained from laboratory incubation was modeled using various statistical approaches. The PB-500 and PB-700 reduced cumulative N2O-N emissions by 68.5 % and 73.9 % and CO2 equivalent C emissions by 66.9 % and 72.4 %, respectively, compared to unamended control. The N2O emissions were positively associated with soil nitrate N, available P, and biochar ash content while negatively associated with SOC. The CO2 emission was negatively related to biochar C:N ratio and volatile matter content. Biochar amended soils had 49.2 % (PB-500) to 87.7 % (PB-700) greater SOC and 22.9 % (PB-700) to 48.1 % (GB-760) greater sorghum yield than the control. While PB-700 had more saprophytes than the control, the GB-760 yielded a greater yield than biochars prepared by pyrolysis. Microbial biomass C was 7.23 to 23.3 % greater in biochar amended soils than in control. The double exponential decay model best explained the dynamics of C mineralization, which was associated with initial soil nitrate N and available P positively and total fungi and protozoa biomass negatively. Biochar amendment could be a climate smart agricultural strategy. Pyrolysis pine wood biochar showed the greatest potential to reduce GHG emissions and enhance SOC storage and stability, and gasification biochar contributed more to SOC storage and increased crop yield.

A novel Biochar-PGPB strategy for simultaneous soil remediation and safe vegetable production

There is currently increasing pressure on agriculture to simultaneously remediate soil and ensure safe agricultural production. In this study, we investigate the potential of a novel combination of biochar and plant growth-promoting bacteria (PGPB) as a promising approach. Two types of biochar, corn stover and rice husk-derived, were used in combination with a PGPB strain, Bacillus sp. PGP5, to remediate Cd and Pb co-contaminated soil and enhance lettuce performance. The contaminated soil was pre-incubated with biochar prior to PGP5 inoculation. The combined application of biochar and PGPB reduced the diethylenetriaminepentaacetic acid (DTPA) -extractable Cd and Pb concentrations in the soil by 46.45%–55.96% and 42.08%–44.83%, respectively. Additionally, this combined application increased lettuce yield by 23.37%–65.39% and decreased Cd and Pb concentrations in the edible parts of the lettuce by 57.39%–68.04% and 13.57%–32.50%. The combined application showed a better promotion on lettuce growth by facilitating chlorophyll synthesis and reducing oxidative stress. These demonstrated a synergistic effect between biochar and PGPB. Furthermore, our study elucidated the specific role of the biochar-PGPB combination in soil microbial communities. Biochar application promoted the survival of PGP5 in the soil. The impact of biochar or PGPB on microbial communities was found to be most significant in the early stage, while the development of plants had a greater influence on rhizosphere microbial communities in later stage. Plants showed a tendency to recruit plant-associated microbes, such as Cyanobacteria, to facilitate growth processes. Notably, the combined application of biochar and PGPB expedited the assembly of microbial communities, enabling them more closely with the rhizosphere microbial communities in late stage of plant development and thus enhancing their effects on promoting plant growth. This study highlights the “accelerating” advantage of the biochar-PGPB combination in the assembly of rhizosphere microbiomes and offers a new strategy for simultaneous soil remediation and safe agricultural production.

The Effect of Bioactivator and Biochar Types on The Organic Waste Composing Process

Background: Combining the right bioactivator and biochar dosage can speed up the process and increase the compost quality. Using compost in agriculture can reduce the excessive use of chemical fertilizers, improve soil health and crop yields, and contribute to overall agricultural sustainability. Methods: The research was conducted in March-August 2021 in Kemantren Village, Tulangan District, Sidoarjo Regency. Analysis activities were conducted at the Land Resources Laboratory, Faculty of Agriculture, UPN "Veteran" East Java. This research uses a factorial experimental design based on CRD (Completely Randomized Design) and consists of two factors. Factor 1 is the type of bioactivator, namely: A0: Control; A1: Cattle Farmer; A2: Tapai; and A3: Banana Beetle. Factor 2 provides biochar: B0: Control; B1: 200 grams; and B2: 300 grams. Observation data were analyzed using Analysis Of Variance (ANOVA). Then, if there is a real difference between treatments, the Honest Significant Difference (BNJ) test is carried out with an error rate of 5%. Results: The research results showed that the best compost was the use of a banana hump cultivator, while the best biochar was 200 g. The best results from the combination of bioactivator and biochar were the application of 200 g of cow manure and banana hump bioactivator. Conclusions: The combination of banana stem bioactivators and cow dung with 0 gr biochar (control) improved the quality of the chemical properties of the compost. In contrast, adding biochar at both 200 g and 300 g concentrations showed improvements in the physical quality of the compost texture.

The effectiveness of various biochar types in enhancing the phytoremediation of soils polluted with petroleum hydrocarbon

AbstractBackgroundBiochar can enhance phytoremediation in petroleum hydrocarbon polluted soils, making it an intriguing soil amendment option for remediating polluted soil. Biochar can improve the fertility of depleted soils through a range of mechanisms. This study can contribute valuable insights into the origin of biochar and enhance our understanding of the efficacy of different biochar types in remediating petroleum hydrocarbon polluted soils.AimsTo assess the efficacy of different biochar types and plant growth in remediating petroleum hydrocarbon polluted soils.MethodsA field experiment was conducted at the automobile workshop (commonly called mechanic village) from July to October 2021, using a randomized complete block design. The land was sectioned into designated plots with three replicates. Maize stalk biochar (MSB) and nipa palm biochar (NPB) were treated differently in each plot at a rate of 20 t ha−1. Plots containing no biochar were used as controls. Initial and final soil analyses were conducted.ResultsPreliminary soil assessments revealed higher values of soil bulk density (1.51 g cm−3), moisture content (35.02%), organic carbon (41.01 g kg−1), cation exchange capacity (13.27 cmol kg−1), total petroleum hydrocarbon content (PHCt) (775.83 mg kg−1), cadmium (Cd) (5.41 mg kg−1), chromium (Cr) (25 mg kg−1), lead (Pb) (33.51 mg kg−1), and zinc (Zn) (0.91 mg kg−1) in the polluted soil than in the unpolluted counterpart. The polluted soil displayed lower hydraulic conductivity (Ks) (1.17 cm h−1), available phosphorus (69.46 mg kg−1), manganese (Mn) (6.38 mg kg−1) and iron (Fe) (4.18 mg kg−1) contents than the unpolluted soil. The PHCt, Cd, and Cr were significantly decreased following the application of biochar. NPB recorded the lowest petroleum hydrocarbon (19%), lead (37%), manganese (57%), and zinc (69%) contents, whereas MSB had the lowest cadmium (50%) and chromium (27%) contents when compared with the control. Between heavy metal accumulations in the leaves and fruits, a greater accumulation of Cd, Cr, and Pb was found in the leaves, whereas Ni accumulation was found in the fruits. The highest Cd (47.0 mg kg−1) and Ni (8.3 mg kg−1) accumulations in the leaves were recorded in NPB treated plots. Similarly, Cd (5.3 mg kg−1), Cr (3.7 mg kg−1), Pb (21.6 mg kg−1), and Ni (23.4 mg kg−1) accumulation in the fruits recorded the highest values in the NPB treated plots. The NPB plants were the tallest compared with the other treatments. In addition, NPB plants had the widest leaf area compared with other treatments.ConclusionThe results indicated that the amendment of NPB may be suitable for the phytoremediation of soils polluted with petroleum hydrocarbons.

Exploring the influence of invasive weed biochar on the sorption and dissipation dynamics of imazethapyr in sandy loam soil.

The management of invasive weeds on both arable and non-arable land is a vast challenge. Converting these invasive weeds into biochar and using them to control the fate of herbicides in soil could be an effective strategy within the concept of turning waste into a wealth product. In this study, the fate of imazethapyr (IMZ), a commonly used herbicide in various crops, was investigated by introducing such weeds as biochar, i.e., Parthenium hysterophorus (PB) and Lantana camara (LB) in sandy loam soil. In terms of kinetics, the pseudo-second order (PSO) model provided the best fit for both biochar-mixed soils. More IMZ was sorbed onto LB-mixed soil compared to PB-mixed soil. When compared to the control (no biochar), both PB and LB biochars (at concentrations of 0.2% and 0.5%) increased IMZ adsorption, although the extent of this effect varied depending on the dosage and type of biochar. The Freundlich adsorption isotherm provided a satisfactory explanation for IMZ adsorption in soil/soil mixed with biochar, with the adsorption process exhibiting high nonlinearity. The values of Gibb's free energy change (ΔG) were negative for both adsorption and desorption in soil/soil mixed with biochar, indicating that sorption was exothermic and spontaneous. Both types of biochar significantly affect IMZ dissipation, with higher degradation observed in LB-amended soil compared to PB-amended soil. Hence, the findings suggest that the preparation of biochar from invasive weeds and its utilization for managing the fate of herbicides can effectively reduce the residual toxicity of IMZ in treated agroecosystems in tropical and subtropical regions.

Versatile biochar for wood‐plastic composites: Improving mechanical properties, dimensional and thermal stability

AbstractIn this study, three types of biochar including wood biochar (WB), rice husk biochar (RHB), and bamboo biochar (BB) were used as fillers to mix with wood flour (WF), polypropylene (PP), and maleic anhydride polypropylene (MAPP) to prepare wood polymer biochar composites (WPBC). The influences of biochar types and addition amounts (10 wt%, 20 wt%, 30 wt%, and 40 wt%) on the mechanical properties, dimension stability, and thermal stability of WPBC were investigated. The results showed that the water absorption rate and thickness swelling rate of WPBC were lower than control group due to the hydrophobic nature of the biochar. Additionally, the presence of biochar was beneficial to the interfacial bonding and stress transmission in composites, resulting in better mechanical properties. Composites containing 20 wt% RHB showed the highest flexural modulus among all, which increased by 11.27% compared to control group. Adding WB also enhanced the tensile and impact strength of composites at a loading level of 10 wt%, with the value of 39.10 MPa and 15.55 KJ/m2, respectively. The thermal stability and flame retardancy of WPBC was improved due to the presence of SiO2 in biochar, which could hinder heat transmission and thermal degradation during combustion process. Concurrently, the rate of heat release and smoke generation in WPBC also decreased significantly. The oxygen limiting index (LOI) of composites with 20 wt% RHB was as high as 26.64%, increasing by 30.14% compared to control group. The results suggested that biochar was a promising alternative to commercial additives for the cost‐effective production of composites.Highlights Effects of biochar loading level and type were compared. Enhanced the mechanical properties by optimizing interfacial bonding. Biochar improved the dimensional and thermal stability. Biochar is a versatile and cost‐effective additive.

Added Biochars Promoted Nitrogen and Phosphorus Removal from Ecological Ditches at Low Temperature

The global issue of ecological ditches being poor in removing nitrogen and phosphorus under cold winter temperatures has been identified. This study introduced three types of biochar (reed, rice, and corn) into ecological ditch sediments via two application methods: rhizosphere and mixed addition. The purpose was to explore how these methods affect the removal of nitrogen and phosphorus, as well as their influences on microbial communities in sediments. The results indicated that the addition of biochar to ecological ditches significantly enhanced the removal of nitrogen and phosphorus. Among the three types of biochar, the mixed addition of corn biochar yielded the greatest results, achieving removal rates of 77.1% for total nitrogen (TN), 93.3% for NH4+-N, and 90.3% for total phosphorus (TP). The growth of Vallisneria natans was greatly improved by the mixed addition method, resulting in an average increase of 154%. This improvement was superior to the rhizosphere addition group, which led to a growth increase of 125%. In comparison, the control group (CK) showed a decrease of 4.8% in growth. Different methods of biochar addition resulted in changes in the physicochemical properties and stoichiometry of the plants. Microbial analyses showed that the addition of biochar reduced the diversity and abundance of the substrate microbial community.

The effect of biochar types on carbon cycles in farmland soils: A meta analysis

Application of biochar has been demonstrated to be a successful strategy for boosting soil carbon sequestration and altering the agricultural soil carbon cycle. However, in the studies involving biochar worldwide, the effects of different types of biochar on the soil carbon component response direction and increase are not consistent. Therefore, to assess the effects of applying four types of biochar during the soil carbon cycle on carbon components on a farmland, we performed a meta-analysis of 1150 comparisons from 86 peer-reviewed publications. Generally speaking, the types of biochar raw materials have a significant impact on soil carbon cycle. The application of chaff biochar significantly inhibited (10.0 %) soil respiration, while the application of manure biochar (47.0 %), straw biochar (11.2 %) and wood biochar (8.7 %) showed a strong promotion effect on CO2 emission. In addition, although the soil organic C, microbial biomass C and dissolved organic C all had positive responses to the application of the four biochar types, the degree and increase in their response varied greatly due to the differences in biomass raw materials. Moreover, by increasing the biochar rates applied to coarse-textured soils with low average annual rainfall and an average temperature under controlled circumstances, the relative increase in SOC was encouraged. Meanwhile, applying low temperature pyrolytic biochar (≤400 °C) at a lower rate (<25 t/ha) in the long-term experiment (>3 years) is more beneficial to soil C sequestration and emission reduction. Hence, climatic conditions, agricultural management practices, and initial soil properties jointly constrained and influenced the ability of biochar to alter the soil C cycle. Based on this, our research offers a fresh viewpoint for making a profound study biochar-enhanced soil C cycle.

Simultaneous elimination of antibiotic-resistant bacteria and antibiotic resistance genes by different Fe-N co-doped biochars activating peroxymonosulfate: The key role of pyridine-N and Fe-N sites

The coexistence of antibiotic resistance genes (ARGs) and antibiotic-resistant bacteria (ARB) in the environment poses a potential threat to public health. In our study, we have developed a novel advanced oxidation process for simultaneously removing ARGs and ARB by two types of iron and nitrogen-doped biochar derived from rice straw (FeN-RBC) and sludge (FeN-SBC). All viable ARB (approximately 108 CFU mL−1) was inactivated in the FeN-RBC/ peroxymonosulfate (PMS) system within 40 min and did not regrow after 48 h even in real water samples. Flow cytometry identified 96.7 % of dead cells in the FeN-RBC/PMS system, which verified the complete inactivation of ARB. Thorough disinfection of ARB was associated with the disruption of cell membranes and intracellular enzymes related to the antioxidant system. Whereas live bacteria (approximately 200 CFU mL−1) remained after FeN-SBC/PMS treatment. Intracellular and extracellular ARGs (tetA and tetB) were efficiently degraded in the FeN-RBC/PMS system. The production of active species, primarily •OH, SO4•- and Fe (IV), as well as electron transfer, were essential to the effective disinfection of FeN-RBC/PMS. In comparison with FeN-SBC, the better catalytic performance of FeN-RBC was mainly ascribed to its higher amount of pyridine-N and Fe0, and more reactive active sites (such as CO group and Fe-N sites). Density functional theory calculations indicated the greater adsorption energy and Bader charge, more stable Fe-O bond, more easily broken OO bond in FeN-RBC/PMS, which demonstrated the stronger electron transfer capacity between FeN-RBC and PMS. To encapsulate, our study provided an efficient and dependable method for the simultaneous elimination of ARGs and ARB in water.

Urine-enriched biochar: Coupling sustainability in sanitation and agriculture

Linear models of fertilizer production and application are environmentally harmful. Predominant approaches to waste management treat human excreta as a pollutant rather than a source of nutrients for agriculture. Container-based sanitation (CBS) systems safely contain and transport excreta for treatment and reuse, though urine is often contained but not treated. A major challenge of urine-nutrient recovery is the shift in nitrogenous species in urine during storage, from urea to ammonia (NH3) and ammonium (NH4+), due to urease activity. This can lead to gaseous NH3 losses from urine that depletes its fertilizer potential. Urine-enriched biochar (UEBC) may act as a slow-release fertilizer of urine nutrients. We quantified the adsorption of nitrogen in fresh, stored, and CBS-style urine to wood waste, sewage sludge, and walnut shell biochars. These UEBCs were compared to urine-only treatments and fertilized and unfertilized controls in a greenhouse growth experiment. We found that the &amp;lt;500-µm biochar size fraction retained significantly more nitrogen than larger particles across biochars. Urine-nitrogen adsorption to biochar and uptake into plant tissue varied across biochar type and urine condition. The quantity of urine applied in urine-only treatments, regardless of type, was positively correlated with plant nitrogen uptake. Plant biomass did not differ significantly across treatments. These findings emphasize the need to optimize UEBC application for different urine and biochar conditions, particularly for CBS and other urine-diverting operations.

Comparative analysis and prediction of cation exchange capacity via summation: influence of biochar type and nutrient ratios

IntroductionEnhancing soil cation exchange capacity (CEC) is of paramount importance for sustainable agriculture and ecosystem health. This study investigated the pivotal role of biochar in altering soil CEC and challenges conventional assumptions about universal effects of biochar application.MethodsContrasting biochar types, one with a low ash content of 4.4% (switchgrass-derived biochar, SGB) and the other with a high ash content of 45.9% (poultry litter-derived biochar, PLB) were used. Two experiments treated with increasing biochar application rates were conducted: one without plants and the other grown with ryegrass. Effective CEC (summation method) was determined by two extraction methods: Mehlich-3 (M3) and ammonium acetate (AA).Results and discussionThe SGB decreased CEC by 27% on average (from both experiments) from the lowest to the highest rate of biochar application, while the PLB significantly increased CEC by 91%. This highlights the critical role of biochar properties in influencing CEC dynamics. In the second experiment, ryegrass cultivation revealed the greater importance of the calcium and magnesium/potassium ratio ([Ca+Mg]/K) in the soil CEC than CEC only for plant growth in biochar-amended soils. The ratios for optimum ryegrass production ranged from 82‒86 (M3) and 69‒74 (AA), which was translated to 88:11:1 Ca:Mg:K percent base saturation ratios. Moreover, predictive models for estimation of soil CEC after biochar application were successfully developed based on initial soil and biochar CEC. However, M3 was more reliable than AA for such predictions mainly because it was more successful in predicting nutrient availability from biochar. These models offer a promising tool for informed soil management decisions.ConclusionThis research emphasizes the importance of biochar feedstock, elucidates nutrient ratio effects on plant growth, and provides a practical means to anticipate soil CEC changes post-biochar application.

Effect of Biochar Types and Rates on SOC and Its Active Fractions in Tropical Farmlands of China

To date, most studies have shown that biochar has great potential in carbon sequestration and reduction, as well as soil quality improvement. However, there is limited knowledge of its effect on soil organic carbon (SOC) fractions in tropical farmland. This study aimed to determine the impact of different types and rates of biochar applied in tropical farmlands on so SOC and its active fractions. The SOC, microbial biomass carbon (MBC), dissolved organic carbon (DOC), and soil mineralizable carbon (SMC) in the 0–30 cm soil layers under rice hull (R) and peanut shell (P) biochar treatments were measured. The results showed that the application of R and P biochar increased the contents, stocks, and cumulative stocks of SOC, MBC, and DOC in the 0–10 cm, 10–20 cm, and 20–30 cm soil layers. The contents, stocks, and cumulative stocks increased with increasing biochar application rates. Compared with CK, the ranges of the increased SOC, MBC, and DOC cumulative stocks were 10.76–46.36%, 30.04–195.65%, and 0.02–17.03%, respectively. However, the R60 and P60 had the lowest cumulative stocks of SMC, decreasing by 14.69% and 8.05%, respectively. The biochar treatment of more than 20 t ha−1 reduced the ratio of SMC:SOC and active fractions:SOC. Therefore, it can be inferred that the application of biochar improved the levels of SOC, MBC, and DOC, and the application of more than 20 t ha−1 biochar could decrease soil carbon mineralization, thus improving the stability of SOC in tropical farmlands.

Adsorption of tetracycline by nitrogen-enriched biochar prepared at different pyrolysis temperatures: Considering the crucial role of nitrogen configuration

Nitrogen atom doping is widely employed to prepare efficient adsorbents to handle target pollutants thanks to its similarity in radius to carbon atoms and excellent functionality. In this study, three types of nitrogen-enriched biochars (NBCs) were prepared to use the corn straw as the raw material and melamine as the nitrogen source by pyrolyzing at 700, 800, and 900 °C (named 700NBC, 800NBC and 900NBC), which were used to remove tetracycline (TC) from water. Results showed that the 900NBC exhibited the highest specific surface area (324.29 m2/g) as well as the maximum adsorption capacity (194.42 mg/g) for TC, compared to 800NBC (176.44 mg/g) and 700NBC (163.32 mg/g). What’s more, the adsorption kinetics and adsorption isotherms were well-fitted by the pseudo-second-order and Langmuir models, indicating that for the adsorption of TC by NBCs, monolayer adsorption and chemisorption were dominant. Specifically, the excellent adsorption performance of NBCs for TC was mostly attributed to the pore filling, hydrogen bonding, π-π interactions, Lewis acid-base interactions, and electrostatic interactions. Importantly, the graphitic N serves as the primary TC adsorption site, followed by pyridinic N. This study would provide new insight into the impact of nitrogen configuration on the adsorption mechanism of NBCs for TC.