Two-dimensional Magneto-optical Trap Research Articles

High flux strontium atom source

We present a novel cold strontium atom source designed for quantum sensors. We optimized the deceleration process to capture a large velocity class of atoms emitted from an oven and achieved a compact and low-power setup capable of generating a high atomic flux. Our approach involves velocity-dependent transverse capture of atoms using a two-dimensional magneto-optical trap. To enhance the atomic flux, we employ tailored magnetic fields that minimize radial beam expansion and incorporate a cascaded Zeeman-slowing configuration utilizing two optical frequencies. The performance is comparable to that of conventional Zeeman slower sources, and the scheme is applicable to other atomic species. Our results represent a significant advancement towards the deployment of portable and, possibly, space-based cold atom sensors.

Enhanced production of <sup>199</sup>Hg cold atoms based on two-dimensional magneto-optical trap

Efficient preparation of cold atoms plays an important role in realizing precision measurement including optical lattice clocks (OLCs). Fast preparation of cold atoms reduces Dick noise by shortening dead time in a clock interrogation cycle, which improves the stability of OLCs. Here, we increase the loading rate of the three-dimensional magneto-optical trap (3D-MOT) in the ultra-high vacuum environment by utilizing the two-dimensional magneto-optical trap (2D-MOT) with a push beam, reduce the temperature of cold atoms with the compression-MOT technique which is implemented by reducing the detuning of 3D-MOT rapidly at the end of atom preparation, and realize the enhanced production of cold atoms for <sup>199</sup>Hg OLCs. To achieve 3D-MOT and 2D-MOT of mercury atoms, a deep ultraviolet laser (DUVL) system composed of three DUVLs is developed with one working in lower power for frequency locking and the other two in high power for laser cooling. Such a configuration improves the long-term frequency stability and shows greater robustness than our previous system consisting of two DUVLs. To maximize the 3D-MOT loading rate, we orderly optimize the detuning and the magnetic field gradient of 3D-MOT and those of 2D-MOT as well as the detuning and the power of the push beam. After all parameters are optimized, we measure the maximum loading rate of 3D-MOT to be 3.1×10<sup>5</sup> s<sup>–1</sup> and prepare cold atoms of 1.8×10<sup>6</sup> in 9 s. The loading rate is greatly enhanced by a factor of 51 by using 2D-MOT and the push beam. In order to improve the efficiency of transferring cold atoms from 3D-MOT to optical lattice, we use compression-MOT technique to reduce the temperature of cold atoms and produce cold <sup>199</sup>Hg atoms which are about 45 μK, lower than the expected temperature of Doppler cooling theory. By achieving the high gain of the 3D-MOT loading rate under the ultra-high vacuum and reducing the temperature of cold atoms, this enhanced preparation of cold atoms based on 2D-MOT effectively shortens the preparation time of cold atoms and improves the transfer efficiency of optical lattice, which provides a significant scheme for efficiently preparing cold mercury atoms in other experiments.

Design and simulation of a source of cold cadmium for atom interferometry

We present a novel optimised design for a source of cold atomic cadmium, compatible with continuous operation and potentially quantum degenerate gas production. The design is based on spatially segmenting the first and second-stages of cooling with the strong dipole-allowed 1S0-1P1 transition at 229 nm and the 326 nm 1S0-3P1 intercombination transition, respectively. Cooling at 229 nm operates on an effusive atomic beam and takes the form of a compact Zeeman slower (∼5 cm) and two-dimensional magneto-optical trap (MOT), both based on permanent magnets. This design allows for reduced interaction time with the photoionising 229 nm photons and produces a slow beam of atoms that can be directly loaded into a three-dimensional MOT using the intercombination transition. The efficiency of the above process is estimated across a broad range of experimentally feasible parameters via use of a Monte Carlo simulation, with loading rates up to 108 atoms s−1 into the 326 nm MOT possible with the oven at only 100 ∘C. The prospects for further cooling in a far-off-resonance optical-dipole trap and atomic launching in a moving optical lattice are also analysed, especially with reference to the deployment in a proposed dual-species cadmium-strontium atom interferometer.

Two-dimensional magneto-optical trap of dysprosium atoms as a compact source for efficient loading of a narrow-line three-dimensional magneto-optical trap

Two-dimensional magneto-optical trap of dysprosium atoms as a compact source for efficient loading of a narrow-line three-dimensional magneto-optical trap

Sharp Focusing of an Atomic Beam with the Doppler and Sub-Doppler Laser Cooling Mechanisms in a Two-Dimensional Magneto-Optical Trap

The focusing of an atomic beam with the use of a two-dimensional magneto-optical trap in order to increase the number of atoms in the region of their laser cooling and localization near an atom chip is discussed. Two regimes of the interaction of atoms with a focusing laser field are considered: (i) the Doppler interaction regime, which occurs at small detunings of the laser field from the atomic resonance, and (ii) the sub-Doppler interaction regime, which occurs at large detunings of the laser field from the atomic resonance. The efficiency of focusing in the first case is low because of the momentum diffusion. It has been shown that the momentum diffusion in the sub-Doppler cooling mechanism is insignificant and, as a result, the broadening of the transverse velocity distribution of atoms is small. The sharp focusing of the atomic beam is possible in this interaction regime.

Jet-loaded cold atomic beam source for strontium.

We report on the design and characterization of a cold atom source for strontium (Sr) based on a two-dimensional magneto-optical trap (MOT) that is directly loaded from the atom jet of a dispenser. We characterize the atom flux of the source by measuring the loading rate of a three-dimensional MOT. We find loading rates of up to 108 atoms per second. The setup is compact, easy to construct, and has low power consumption. It addresses the longstanding challenge of reducing the complexity of cold beam sources for Sr, which is relevant for optical atomic clocks, quantum simulation, and computing devices based on ultracold Sr.

A cold cesium beam source based on a two-dimensional magneto-optical trap

A beam source is proposed for the production of an intense cold cesium atomic beam that can be used in cesium beam atomic clocks. The source is based on a two-dimensional magneto-optical trap (2D-MOT), but introduces hollow cooling and pushing lights in the axial direction to create a 2D+-MOT, which separates the cooling and pushing functions while the low-power pushing light pushes atoms out to form a cold atomic beam. This cold cesium atomic beam source reduces the light shift due to leakage light and retains longitudinal cooling to increase the flux of the cold atomic beam compared with that of the conventional 2D+-MOT scheme. The specifics of the design are investigated, the atomic velocity and beam flux are calculated, and the results are experimentally verified. The results demonstrate that when the power of the pushing light is 180 µW and when its frequency resonates with the 4 → 5′ transition of the Cs D2 line, the most probable longitudinal velocity of the outgoing cold atomic beam, the width of velocity distribution, and the atomic beam flux are 19.38 m/s, 8.1 m/s, and 1.7 × 1010 atoms/s, respectively.

Enhanced cold mercury atom production with two-dimensional magneto-optical trap

A cold atom source is important for quantum metrology and precision measurement. To reduce the quantum projection noise limit in optical lattice clock, one can increase the number of cold atoms and reduce the dead time by enhancing the loading rate. In this work, we realize an enhanced cold mercury atom source based on a two-dimensional (2D) magneto-optical trap (MOT). The vacuum system is composed of two titanium chambers connected with a differential pumping tube. Two stable cooling laser systems are adopted for the 2D-MOT and the three-dimensional (3D)-MOT, respectively. Using an optimized 2D-MOT and push beam, about 1.3×106 atoms, which are almost an order of magnitude higher than using a pure 3D-MOT, are loaded into the 3D-MOT for 202Hg atoms. This enhanced cold mercury atom source is helpful in increasing the frequency stability of a neutral mercury lattice clock.

Integrated Design and Realization of Two-Dimensional Magneto-Optical Trap for Ultra-Cold Atomic Physics Rack in Space

Integrated Design and Realization of Two-Dimensional Magneto-Optical Trap for Ultra-Cold Atomic Physics Rack in Space

Lithium-cesium slow beam from a two-dimensional magneto-optical trap

We present the creation of a lithium-cesium slow beam using a two-dimensional magneto-optical trap. The two-species atomic beam is directed to load a three-dimensional magneto-optical trap in ultrahigh vacuum. We achieve a loading rate of 1.3$\times$10$^{7}$ lithium atoms/s with the lithium oven temperature at 370~$^{\circ}$C and 2.2$\times$10$^{7}$ cesium atoms/s with the Cs oven temperature at 20~$^{\circ}$C. The maximum numbers of lithium and cesium atoms in the trap are 1.0$\times$10$^{9}$ and 1.4$\times$10$^{8}$, respectively. Our results show that the simple and compact two-dimensional magneto-optical trap is suitable for producing an atomic beam of two species that have a large mass ratio and very different volatilities.

Hollow Bessel beams for guiding atoms between vacuum chambers: a proposal and efficiency study

We explore a scheme for guiding cold atoms through a hollow Bessel beam generated by a single axicon and a lens from a two-dimensional magneto-optical trap toward a science chamber. We compare the Bessel beam profiles measured along the optical axis to a numerical propagation of the beam’s wavefront, and we show how it is affected by diffraction during the passage through a long narrow funnel serving as a differential pumping tube between the chambers. We derive an approximate analytic expression for the intensity distribution of the Bessel beam and the dipolar optical force acting on the atoms. By a Monte-Carlo simulation based on a stochastic Runge–Kutta algorithm of the motion of atoms initially prepared at a given temperature, we show that a considerable enhancement of the transfer efficiency can be expected in the presence of a sufficiently intense Bessel beam.

Theoretical design of quantum memory unit for under water quantum communication using electromagnetically induced transparency protocol in ultracold 87Rb atoms

In this paper, we present a theoretical proposal to realize Quantum Memory (QM) for storage of blue light pulses (420 nm) using Electromagnetically Induced Transparency (EIT). Three-level lambda-type EIT configuration system is solved in a fully quantum mechanical approach. Storing blue light has the potential application in the field of underwater quantum communication as it experiences less attenuation inside the sea water. Our model works by exciting the relevant transitions of [Formula: see text]Rb atoms using a three-level lambda-type configuration in a Two-Dimensional Magneto-Optical Trap (2D MOT) with an optical cavity inside it. We have estimated Optical Depth inside the cavity (ODc) of [Formula: see text], group velocity ([Formula: see text]) [Formula: see text][Formula: see text]ms[Formula: see text], Delay Bandwidth Product(DBP) of 23 and maximum storage efficiency as [Formula: see text] in our system.

Three-Dimensional Cooling of an Atom-Beam Source for High-Contrast Atom Interferometry

We present a compact, two-stage atomic beam source that produces a continuous, narrow, collimated and high-flux beam of rubidium atoms with sub-Doppler temperatures in three dimensions, which features very low emission of near-resonance fluorescence along the atomic trajectory. The atom beam source originates in a pushed two-dimensional magneto-optical trap (2D$^+$ MOT) feeding a slightly off-axis three-dimensional moving optical molasses stage that continuously cools and redirects the atom beam. The capture velocity of the moving optical molasses is deliberately chosen to be low, $\sim 3$ m/s, to reduce fluorescence, and the cooling light is detuned by several atomic linewidths from resonance to reduce the absorption cross-section of cooling-induced fluorescence. Near-resonance light from the 2D$^+$ MOT and the push beam does not propagate to the output atomic trajectory due to a 10 degree bend in the atomic trajectory. The atomic beam emitted from the two-stage source has a flux up to $1.6(3)\times 10^9\;\textrm{atoms/s}$, with an optimized temperature of $15.0(2)\;\mu$K. We employ continuous Raman-Ramsey interference measurements at the atom beam output to study the sources of decoherence in the presence of continuous cooling, and demonstrate that the atom beam source effectively preserves high fringe contrast even during cooling. This cold-atom beam source is appropriate for use in atom interferometers and clocks, where continuous operation eliminates dead time, the slow atom beam velocity (6 - 16 m/s) improves sensitivity, the narrow 3D velocity distribution improves fringe contrast, and the low reabsorption of scattered light mitigates decoherence caused by the continuous cooling process.

Sideband-Enhanced Cold Atomic Source for Optical Clocks

We demonstrate the enhancement and optimization of a cold strontium atomic beam from a two-dimensional magneto-optical trap (2D-MOT) transversely loaded from a collimated atomic beam by adding a sideband frequency to the cooling laser. The parameters of the cooling and sideband beams were scanned to achieve the maximum atomic beam flux and compared with Monte Carlo simulations. We obtained a 2.3 times larger, and 4 times brighter, atomic flux than a conventional, single-frequency 2D-MOT, for a given total power of 200 mW. We show that the sideband-enhanced 2D-MOT can reach the loading rate performances of space demanding Zeeman slower-based systems, while it can overcome systematic effects due to thermal beam collisions and hot black-body radiation shift, making it suitable for both transportable and accurate optical lattice clocks. Finally we numerically studied the possible extensions of the sideband-enhanced 2D-MOT to other alkaline-earth species.

Design and research of two-dimensional magneto-optical trap of sodium atom using permanent magnets

It is helpful to make full use of the laboratory space by simplifying the cold atom experimental system, especially in the area of aerospace and precision measurement. We present a two-dimensional magneto-optical trap (2DMOT) for sodium atoms, whose magnetic field is produced by four sets of permanent magnets, and the residual field in the vertical direction is used for a Zeeman slower. The atoms are cooled and trapped in a 2DMOT which provides a highly efficient atomic flux for three-dimensional magneto-optical trap (3DMOT) in a high-vacuum chamber. The maximum 3DMOT loading rate is measured to be 2.3 × 10<sup>9</sup>/s by optimizing the parameters of the Zeeman slower and the 2DMOT. The atom number trapped in 3DMOT is 6.2 × 10<sup>9</sup>. The 2DMOT designed by using permanent magnets has the property of compact structure and simple size, which can be used to cool and trap other neutral atoms.

Recoil-ion momentum spectroscopy for cold rubidium in a strong femtosecond laser field

In this study, a new magneto-optical trap (MOT) recoil ion momentum spectrometer is built for investigating the interactions between cold rubidium (Rb) atoms and strong laser fields. This compact device can provide cold Rb in three different modes: 2D MOT mode, in which the beam generated by a two-dimensional MOT is pushed directly to the interaction regime; molasses mode, in which cooling lasers are applied at the interaction regime; and 3D MOT mode, in which a quadrupole magnetic field is applied to form a three-dimensional MOT. The typical densities of the three target modes are estimated to be 107, 108, and 109 atoms/cm3, respectively. Switching between the target modes is expected to provide a broad range of laser intensities with reasonable count rates while avoiding space charge effects. A single photoionization experiment serves as a benchmark test of the recoil ion momentum resolution. The best resolution is estimated as an unprecedented 0.12 a.u. in the time-of-flight direction, demonstrating significant potential for strong field ionization dynamics using this technique.

Compact portable laser system for mobile cold atom gravimeters.

We have designed and realized a compact portable laser system for high-sensitivity mobile cold atom interferometers. The laser system is mounted on a single module with dimensions of 45 cm×45 cm×16 cm and emits lights directly on up to 13 fiber ports for a two-dimensional magneto-optical trap, atom fountain, Raman transition, and normalized detection. A double-sided optical structure and mounts without kinematic adjustment are designed to achieve high-level integration and stability. The laser system is applied to a mobile atom gravimeter and achieves a sensitivity of 28 μGal/Hz1/2. Experiencing 1200-km-long truck transportation, the laser system could be restored to good operating status without internal realignment.

Erratum: Two-dimensional magneto-optical trap as a source for cold strontium atoms [Phys. Rev. A 96 , 053415 (2017)

We report on the realization of a transversely loaded two-dimensional magneto-optical trap serving as a source for cold strontium atoms. We analyze the dependence of the source's properties on various parameters, in particular the intensity of a pushing beam accelerating the atoms out of the source. An atomic flux exceeding $10^9\,\mathrm{atoms/s}$ at a rather moderate oven temperature of $500\,^\circ\mathrm{C}$ is achieved. The longitudinal velocity of the atomic beam can be tuned over several tens of m/s by adjusting the power of the pushing laser beam. The beam divergence is around $60$ mrad, determined by the transverse velocity distribution of the cold atoms. The slow atom source is used to load a three-dimensional magneto-optical trap realizing loading rates up to $10^9\,\mathrm{atoms/s}$ without indication of saturation of the loading rate for increasing oven temperature. The compact setup avoids undesired effects found in alternative sources like, e.g., Zeeman slowers, such as vacuum contamination and black-body radiation due to the hot strontium oven.

Enhanced Loading of 40K from Natural Abundance Potassium Source with a High Performance 2D+ MOT**Supported by the National Key Research and Development Program of China under Grant Nos 2016YFA0300600 and 2016YFA0301500, and the National Natural Science Foundation of China under Grant Nos 11474347, 61227902 and 61775232.

40K is one of the most important atomic species for ultra-cold atomic physics. Due to the extremely low concentration (0.012%) of 40K in natural abundance of potassium, most experiments use 4–10% enriched potassium source, which have greatly suffered from the extremely low annual production and significant price hikes in recent years. Using naturally abundant potassium source, we capture 5.4×106 cold 40K atoms with the help of a high performance of two-dimensional magneto-optical trap (2D+ MOT), which is almost three orders of magnitude greater than previous results without the 2D+ MOT. The number of the 40K atoms is sufficient for most ultra-cold 40K experiments, and our approach provides an ideal alternative for the field.

Two-dimensional magneto-optical trap as a source for cold strontium atoms

We report on the realization of a transversely loaded two-dimensional magneto-optical trap serving as a source for cold strontium atoms. We analyze the dependence of the source's properties on various parameters, in particular the intensity of a pushing beam accelerating the atoms out of the source. An atomic flux exceeding ${10}^{9}\phantom{\rule{0.28em}{0ex}}\mathrm{atoms}/\mathrm{s}$ at a rather moderate oven temperature of $500{\phantom{\rule{0.16em}{0ex}}}^{\ensuremath{\circ}}\mathrm{C}$ is achieved. The longitudinal velocity of the atomic beam can be tuned over several tens of m/s by adjusting the power of the pushing laser beam. The beam divergence is around 60 mrad, determined by the transverse velocity distribution of the cold atoms. The slow atom source is used to load a three-dimensional magneto-optical trap realizing loading rates up to ${10}^{9}\phantom{\rule{0.16em}{0ex}}\mathrm{atoms}/\mathrm{s}$ without indication of saturation of the loading rate for increasing oven temperature. The compact setup avoids undesired effects found in alternative sources like, e.g., Zeeman slowers, such as vacuum contamination and black-body radiation due to the hot strontium oven.