Two-dimensional Electron Density Research Articles

Parametric Analysis of Indium Gallium Arsenide Wafer-based Thin Body (5 nm) Double-gate MOSFETs for Hybrid RF Applications.

The electrical behavior of a high-performance Indium Gallium Arsenide (In- GaAs) wafer-based n-type Double-Gate (DG) MOSFET with a gate length (LG1= LG2) of 2 nm was analyzed. The relationship of channel length, gate length, top and bottom gate oxide layer thickness, a gate oxide material, and the rectangular wafer with upgraded structural characteristics and the parameters, such as switch current ratio (ION/IOFF) and transconductance (Gm) was analyzed for hybrid RF applications. This work was carried out at 300 K utilizing a Non-Equilibrium Green Function (NEGF) mechanism for the proposed DG MOSFET architecture with La2O3 (EOT=1 nm) as gate dielectric oxide and source-drain device length (LSD) of 45 nm. It resulted in a maximum drain current (IDmax) of 4.52 mA, where the drain-source voltage (VDS) varied between 0 V and 0.5 V at the fixed gate to source voltage (VGS) = 0.5 V. The ON current(ION), leakage current (IOFF), and (ION/IOFF) switching current ratios of 1.56 mA, 8.49Í10-6 μA, and 18.3Í107 μA were obtained when the gate to source voltage (VGS) varied between 0 and 0.5 V at fixed drain-source voltage (VDS)=0.5V. The simulated result showed the values of maximum current density (Jmax), one and twodimensional electron density (N1D and N2D), electron mobility (μn), transconductance (Gm), and Subthreshold Slope (SS) are 52.4 μA/m2, 3.6Í107 cm-1, 11.36Í1012 cm-2, 1417 cm2V-1S-1, 3140 μS/μm, and 178 mV/dec, respectively. The Fermi-Dirac statistics were employed to limit the charge distribution of holes and electrons at a semiconductor-insulator interface. The flat-band voltage (VFB) of - 0.45 V for the fixed threshold voltage greatly impacted the breakdown voltage. The results were obtained by applying carriers to the channels with the (001) axis perpendicular to the gate oxide. The sub-band energy profile and electron density were well implemented and derived using the Non-Equilibrium Green's Function (NEGF) formalism. Further, a few advantages of the proposed heterostructure-based DG MOSFET structure over the other structures were observed. This proposed patent design, with a reduction in the leakage current characteristics, is mainly suitable for advanced Silicon-based solid-state CMOS devices, Microelectronics, Nanotechnologies, and future-generation device applications.

DC and RF analysis of ScAlN/GaN/β-Ga2O3 and ScAlN/InGaN/GaN/β-Ga2O3 HEMTs on SiC substrate

Scandium aluminum nitride (ScxAl1-xN) is a promising material among group III nitrides, offering outstanding polarization properties resulting in very large carrier densities. We report the comparative analysis of Sc0.18Al0.72N/GaN/β-Ga2O3 and Sc0.18Al0.72N/InGaN/GaN/β-Ga2O3 HEMTs on Silicon carbide substrate. LG = 55 nm, Sc0.18Al0.72N/GaN/β-Ga2O3 HEMT demonstrated maximum current density (IDS) of 4.38 A/mm, very large carrier density (ns) of 2.34 × 1013 cm−2, large breakdown voltage (74 V) with low on-resistance (Ron ∼ 0.2 Ω mm), and cut-off frequency (fT)/maximum oscillation frequency (fmax) of 220/242 GHz. Introduction of a very thin 5 nm In0.1Ga0.9N layer in the channel, further improves the 2DEG (two-dimensional electron density), drain current, breakdown voltage. Furthermore, Sc0.18Al0.72N/InGaN/GaN/β-Ga2O3 heterostructure shows stable transconductance (gm) over wide gate bias. A gate voltage swing (GVS) of 7.72, IDS of 6.08 A/mm, and VBR of 105 V with Ron ∼ 0.138 recorded. These findings show the merits of scandium aluminium nitride barrier material, which enables the HEMTs for next generation radar and telecommunications.

A seven-channels microwave interferometer measurement system for measuring electron density distribution in hypervelocity transient plasma flow

When a hypersonic vehicle is flying in the near space region, the strong friction between the vehicle and the air can cause the air to ionize. As a result, the plasma sheath around the vehicle and the wake flow field behind it are formed, significantly affecting the electromagnetic (EM) scattering characteristics of the vehicle and resulting in the communication blackout. Therefore, the investigation of electron density distribution of the plasma sheath and wake flow field is of the great significance in the detection, communication, etc. of the hypersonic target. In order to meet the requirements for on-ground electron density distribution measurement of the transient plasma flow fields, the feasibility of measuring electron density profile with seven-channel microwave interferometer measurement system is demonstrated in this work. The wake plasma is modeled as a non-uniform multilayer medium, and the full-wave simulation software FEKO is used to calculate the phase-shift information of EM wave transmitting through non-uniform single-layered dielectric plate, uniform and non-uniform multi-layered dielectric plates. According to the simulation results, the dielectric constant of the substrate is retrieved and compared with the preset result. The retrieved results show that it is feasible that the dielectric constant distribution of non-uniform multi-layered dielectric plate is measured by utilizing the proposed microwave interferometer system with one transmission port and seven receptions. The amplitude-phase dynamic range analysis of the proposed Ka-band microwave measurement system is also carried out. The key technologies including large instantaneous amplitude-phase dynamic range and ray tracking inversion algorithm for two-dimensional (2-D) electron density distribution are also developed. Finally, the complete scheme of Ka-band seven-channel microwave interferometer measurement system is introduced. The system includes one lens antenna to generate the required plane wave and seven open-ended waveguide receiving antennas which are asymmetrically arranged to improve the lateral spatial resolution of the system. The system exhibits the amplitude dynamic range and the phase dynamic range of over 65 dB and 180° under 1 MHz IF bandwidth respectively. The plasma electron density distributions are measured by utilizing the proposed seven-channel microwave interferometer system in the ballistic range and multi-functional shock tube. The response time of the system is smaller than 1μs, satisfying the requirement for the two-dimensional distribution measurement of the transient plasma flow field generated by the ballistic range and multi-functional shock tube. The differences between experimental and numerical results are less than 0.5 order of magnitude, and the variations in transient plasma generated in both ballistic target and shock tube equipments are well detected. The measurement range of plasma electron density is 10<sup>10</sup>－10<sup>13</sup> cm<sup>–3</sup> and the spatial resolution is better than 15mm. In addition, the proposed ray tracing method is also used to invert the two-dimensional (2D) electron density distributions of both square layered model and cylindrical layered model under identical experimental state. The results are in consistent with each other, indicating that the proposed ray tracing method can be used in the inversion of 2D electron density distribution of plasma with different shapes.

Optical emission spectroscopy of fiber laser sustained Xe plasma

Laser-sustained plasma (LSP), a unique method of obtaining high brightness broadband light sources, has been used for rapid optical inspection of wafer defects and has thus attracted great interest. Then Xe plasma sustained under high pressure by a continuous fiber laser was investigated using optical emission spectroscopy (OES). Emission spectra of spatial integration diagnosis have shown that with the increase of laser power and the decrease of Gaussian beam focusing number F, the electron temperature fitted by Boltzmann plot method increased from 0.45 eV to 0.85 eV, the corresponding electron density was roughly an order of magnitude of 1016-1017 cm-3, and the calculated absorption coefficient of plasma was distributed in 0.9–1.5 cm-1. To further analyze the spatial distribution of plasma parameters, the spatial resolved OES of LSP was acquired, and the two-dimensional electron temperature and electron density were determined. The non-uniform distribution of the plasma parameters was analyzed due to the existence of thermal gravity convection and forced convection. The serious self-reversal of emission lines of 881.94 nm and 823.16 nm was observed and analyzed.

Plasma Excitations in SiGe/Si Quantum Wells

Plasma and magnetoplasma excitations in high-quality undoped two-dimensional electron systems based on SiGe/Si quantum wells are studied in detail. A two-dimensional electron system is formed by applying a vo-ltage to the top gate, which is partially transparent to subterahertz radiation in the frequency range of 20‒160GHz. The results for SiGe/Si quantum wells with a Sb δ-doping layer are also presented for comparison. The transport and quantum scattering times for both structures are directly determined. It has been found that the effective electron mass is almost independent of the two-dimensional electron density in a wide density range.

Plasma Excitations in SiGe/Si Quantum Wells

Plasma and magnetoplasma excitations in high-quality undoped two-dimensional electron systems based on SiGe/Si quantum wells are studied in detail. A two-dimensional electron system is formed by applying a vo-ltage to the top gate, which is partially transparent to subterahertz radiation in the frequency range of 20‒160 GHz. The results for SiGe/Si quantum wells with a Sb δ-doping layer are also presented for comparison. The transport and quantum scattering times for both structures are directly determined. It has been found that the effective electron mass is almost independent of the two-dimensional electron density in a wide density range.

Present status of micro-spectroscopy at BL37XU

X-ray micro-spectroscopy is a combination of X-ray absorption fine structure (XAFS) and various X-ray microscopy methods. This method is used in many scientific fields because it provides more sophisticated information, including valence information and local structure information obtained from XAFS, in addition to two-dimensional electron density or elemental distribution. This paper introduces the current status and recent developments of BL37XU, which provides micro-spectroscopy used as an analytical technique in a wide range of fields. Currently, scanning micro-spectroscopy using X-ray focusing optics and full-field micro-spectroscopy using a two-dimensional detector are the two main methods used. Here, we present recent developments of these two methods and the development of a micro-spectroscopy method using coherent diffraction imaging (CDI), which is seen to offer a higher resolution micro-spectroscopy in the next-generation synchrotron radiation.

Spin–Orbit Interaction in ZnO/MgxZn1 –xO Heterojunctions Probed by Electron Spin Resonance Spectroscopy

The spin–orbit interaction in a series of ZnO/MgxZn1 – xO heterojunctions containing a two-dimensional electron system with a wurtzite structure has been studied in detail. The spin–orbit coupling constants have been determined from the analysis of the modification of the single-particle g-factor caused by the spin–orbit interaction in the quantum Hall effect regime. The g-factor has been measured with high accuracy by the electron paramagnetic resonance technique in wide ranges of magnetic fields and electromagnetic frequencies. The spin–orbit coupling constants have been determined for a series of samples with different Mg concentrations, which has allowed us to obtain the dependence of the spin–orbit coupling constant on the two-dimensional electron density n. The measured spin–orbit coupling constant is in the range of 0.5–0.8 meV Å and quite weakly depends on n. The coefficients specifying the linear and cubic contributions to the spin–orbit interaction determined from the approximation of the experimental data are α0 = 0.48 meV Å and γ = 0.12 eV Å3, respectively. These values are correlated with results obtained by other research groups.

Integrated data analysis on the electron density profile of HL-2A with the Bayesian probability inference method

In fusion research, the diagnostic data are obtained from different diagnostic systems, which are relatively independent (in terms of the response function, noise, calibration, etc…). The consequence is that many measurements providing the same physical quantity could provide different results. In this work, the Bayesian probability inference has been applied to the frequency modulated continuous wave reflectometry and the Far-infrared laser interferometer diagnostic systems on HL-2A tokamak, offering the integrated data analysis (IDA) for electron density profile reconstruction. With the implementation, it is demonstrated that more comprehensive inference could be delivered from IDA compared to the traditional individual data analysis technique. The data analysis program based on the Bayesian inference model has been developed to reconstruct the two-dimensional electron density profile, which permits to be further implementation of the HL-2A/2M IDA framework in the near future.

Two-dimensional electron temperature and density profiles of Hall thruster plume plasmas using tomographically reconstructed optical emission spectroscopy

Two-dimensional electron temperature and density profiles in the plume region of 300 W-class Hall thruster Ar plasmas were obtained using tomographically reconstructed optical emission intensity profiles combined with a collisional-radiative (CR) model. A total of 1242 lines of sight were used by rotating the thruster to apply inverse Radon transform-based tomographic reconstructions and Abel inversion. The reconstruction accuracy of the developed diagnostic system was evaluated using a priori images derived from plasma pictures, and the reconstruction error was less than 1% in the region of interest, exhibiting higher accuracy than the Abel inversion. From the Ar Hall thruster plasma, more than 12 different two-dimensional profiles of Ar I emission intensity within a spectral range of 600–1000 nm were obtained 6 mm from the exit plane of the thruster. A CR model using 31 allowed transitions at 15 different states from the ground state to the 2p i states was incorporated with the tomographically reconstructed emission intensity sets. Consequently, two-dimensional electron temperature and density profiles in the range of 5–18 eV and 2.0 × 1016–4.7 × 1017 m−3 were obtained, respectively, exhibiting reasonable agreement with the double Langmuir probe measurements.

Evolution of domain structure with electron doping in ferroelectric thin films

To minimize their electrostatic energy, insulating ferroelectric films tend to break up into nanoscale ``Kittel'' domains of opposite polarization that are separated by uncharged 180$^\circ$ domain walls. Here, I report on self-consistent solutions of coupled Landau-Ginzburg-Devonshire and Schr\"odinger equations for an electron-doped ferroelectric thin film. The model is based on LaAlO$_3$/SrTiO$_3$ interfaces in which the SrTiO$_3$ substrate is made ferroelectric by cation substitution or strain. I find that electron doping destabilizes the Kittel domains. As the two-dimensional electron density $n_\mathrm{2D}$ increases, there is a smooth crossover to a zigzag domain wall configuration. The domain wall is positively charged, but is compensated by the electron gas, which attaches itself to the domain wall and screens depolarizing fields. The domain wall approaches a flat head-to-head configuration in the limit of perfect screening. The polarization profile may be manipulated by an external bias voltage and the electron gas may be switched between surfaces of the ferroelectric film.

Robustness in half-metallicity, thermophysical and structural properties of Co2YAl (Y = Pd, Ag) Heuslers: a first-principles perspective

Heusler materials validates an extensive range of properties characteristically for the prospective high-tech interests. The extensive tunability of these materials through chemical substitutions as well as structural designs sorts the family explicitly fascinating. Self-consistent density functional theory, based on the full-potential linearized augmented plane wave is employed within the WIEN2k simulation code to investigate the structural, magneto-electronic and thermophysical properties of Co2PdAl and Co2AgAl Heusler compounds. The steadiness in P–V plot designates the absence of any structural phase transition from a cubic symmetry structure towards other structural phase. The GGA allows calculating the exchange-correlation energy. The proposed compounds are found stable in a Cu2MnAl prototype phase state. The cohesive and formation energy calculations approve the thermodynamic stability of compounds. The optimized lattice parameters in the stable Fm-3m phase are 5.90 Å for Co2PdAl and 5.97 Å for Co2AgAl respectively. At Fermi level, these alloys exhibit 100% spin polarization and display half-metallicity. The charge shearing among the constituents’ atoms is presented through the two-dimensional (2D) electron density plot with unique color contrast. The low anharmonicity possessed by the material is favored by the thermal parameters and compounds is predicted stable at a wider range of pressure and temperatures.

An Improved Method for the Inversion of Backscatter Ionograms by Using Neighborhood-Aided and Multistep Fitting

To solve the problem that a parameter search easily falls into a local optimum and the two-dimensional electron density profile construction error is large in the process of backscatter ionogram inversion, an improved method using neighborhood-aided and multistep fitting is proposed. The ionospheric parameter inversion results in the adjacent space are combined and reconstructed by using the neighborhood-aided correction method. The introduction of auxiliary information sources addresses the defects of the conventional genetic algorithm. The local region multistep fitting method is used to describe the local uniformity and global inhomogeneity of the two-dimensional electron density profile by dividing the fitting region. The experimental results show that the proposed method can improve the accuracy of backscatter ionogram inversion and provide reliable support for tracking radio ray trajectories.

Investigation of Electron Effective Mass in AlGaN/GaN Heterostructures by THz Spectroscopy of Drude Conductivity

Terahertz time domain spectroscopy (TDS) of the two-dimensional (2-D) electrons in various commercial AlGaN/GaN heterostructures was performed in the frequency range of 0.1–2.0 THz at selected temperatures of 80 and 300 K. Experimental transmission spectra were analyzed using analytical model derived for the thin conductive layer on dielectric substrate assuming a high-frequency Drude response of electrons. Two-dimensional electron mobility and density values found from the best fit parameters were compared with the results of independent Hall experiment demonstrating good agreement within uncertainty range of 10%. Thermal renormalization of the electron effective mass was revealed in all investigated samples manifesting as the increase of up to 1.45 ± 0.13 fold of nominal value obtained at cryogenic temperatures. Fast method based on measurement of the ratio of transmission spectra at two temperatures (80 and 300 K) was proposed to monitor the renormalization phenomenon in the samples with thin Drude conductivity layer where carrier density is relatively independent on temperature.

Model evaluation of accuracy of obtaining total electron content by the method of spaced reception of low Earth orbit satellite signals

A model-based technique to estimate the accuracy of the ionospheric total electron content (TEC) based on the data from spaced receivers of low Earth orbit satellite signals has been suggested. That allows us to estimate the total electron content errors for both quiet ionosphere conditions and under the presence of a plasma ring. To estimate the error, the dynamic model of the electron concentration of the Earth's ionosphere has been used. For the selected input parameters (day of the year, time of day, etc.), a model two-dimensional electron density distribution has been calculated using this model. When calculating this two-dimensional distribution of the electron density, changes have been made that transformed it into a distribution that most closely matches the real ionosphere, for example, the presence of a plasma ring, a trough, etc. Using the obtained distribution, some model quantities (differential phase and total electron content) have been calculated. Then they are used for model estimation of errors in the calculation of the TEC by the spaced reception method. For quite conditions in the ionosphere, the relative error of determining the initial phase constant does not exceed 3 %, and in the case of the plasma ring - 13 %. For the vertical total electron content, the relative error in quite conditions does not exceed 7 %, and in the case of a plasma ring - 60 %. Large values of the relative error are in areas of sharp change of the vertical total electron content.

Ionospheric Sounding Based on Spaceborne PolSAR in P-Band

The signal of spaceborne low-frequency full-polarization synthetic aperture radar (full-pol SAR) contains abundant ionospheric information. Phased Array L-band Synthetic Aperture Radar (PALSAR) working in the L-band has been verified as an emerging ionospheric sounding technology. Aiming for a future P-band SAR system, this paper investigates the ability of the P-band SAR system in ionospheric one-dimensional and two-dimensional detection. First, considering different systematic error levels, the total electron content (TEC) retrieval in L/P-band is studied by using three typical full-pol SAR data sets based on a circular polarization algorithm. Second, the TEC data retrieved by SAR are fused with the ionosonde, and the joint retrieval of ionospheric electron density is performed. Results show that the P-band TEC retrieval is approximately twice as accurate as the L-band retrieval under the same conditions, and possesses excellent robustness. In addition, the TEC obtained by L/P-band SAR can be used to correct the electron density of the topside on the ionosonde. Results also show that compared with the topside correction accuracy of L-band SAR, that of the P-band SAR is improved by more than 20%. SAR has natural high-resolution characteristics and the P-band signal contains more obvious ionospheric information than the L-band signal. Therefore, future spaceborne P-band SAR has many advantages in two-dimensional fine ionospheric observation and one-dimensional electron density retrieval.

Optical design of a laser wavefront sensor applicable under strong diffraction effects by irreproducible microscale high-density plasma

Accurate measurements of electron density in irreproducible microscale high-density plasmas are indispensable for improving laser processing and plasma processing technology because the dynamics of these plasmas are strongly influenced by their electron density. Because single-path laser wavefront sensors are capable of acquiring the two-dimensional electron density distribution with a single shot, the electron density of irreproducible millimeter-scale low-density plasmas has been measured by using such sensors. However, the strong diffraction effects caused by the irreproducible microscale high-density plasmas pose challenges for the measurement. In this study, we numerically and experimentally demonstrate a suitable optical configuration of single-path laser wavefront sensors for accurate measurements of irreproducible microscale high-density plasmas with minimal measurement errors. Our Fresnel diffraction-based numerical simulation indicates that the serious measurement errors caused by the strong diffraction effects can be significantly reduced through the use of relay lenses with high magnification and a short-wavelength laser source. In addition, we propose an alignment procedure for the optical setup to minimize the measurement errors and experimentally validated the procedure by measuring a laser wavefront shaped by a spatial light modulator. Finally, we applied the verified laser wavefront sensor to the measurement of a laser-induced plasma with a two-dimensional line-integrated electron density higher than 1 × 1021 m−2 in an approximately 40 × 50 μm region. This study provides a new strategy to rigorously analyze the dynamics of irreproducible microscale high-density plasmas using a laser wavefront sensor.

Inversion method of two-dimensional distribution of electron density in hypersonic model wake

The ballistic target uses a two-stage light gas gun to launch the model into a hypersonic state, and the model forms a plasma wake when flying at a hypersonic speed in the target chamber. In order to obtain the radial two-dimensional distribution of transient plasma electron density in the wake of hypervelocity model, a seven-channel Ka-band microwave interferometer measuring system is developed. In the transceiver system, a transmitting antenna achieves the plane wave irradiation plasma, and a seven-port array antenna is used to receive plane waves which are passing through the plasma: the antenna beam can completely cover the radial range of the wake. The shortest response time of measuring system is 1 s, and electron density measurement range of the interferometer measuring system is 10<sup>11</sup>–10<sup>13</sup>/cm<sup>3</sup> . The plasma is often treated as layered medium in data processing of multichannel microwave interferometer. Taking into consideration the effect of refraction on the stratified interface in this work, the ray tracing (RT) method is used to establish the electromagnetic propagation model. Combined with the measurement data to construct the objective function, the genetic algorithm (GA) is used to invert the radial two-dimensional distribution of the electron density under different test conditions. The result shows good agreement with the numerical simulation under the same test state, which proves the the data processing method reliable. Then, the influence of the layered model on the calculation result is analyzed, which shows that the seven-layer model is suitable for the wake modeling under given experimental conditions, and thus maximizing the number of receiving channels and ensuring the accuracy. The RT method is used for the first time to achieve the two-dimensional distribution of electron density in the wake of hypervelocity projectile, and some rules of two-dimensional electron density distribution of the hypersonic model under given experimental conditions are realized.

Study on Retrieval Method of Two-dimensional Distribution of Hypersonic Model Wake Electron Density

The ballistic range uses a two-stage light gas gun to launch the model into a hypersonic state, and the model form a plasma wake when flying at hypersonic speed in the target chamber. In order to obtain the radial two-dimensional distribution of transient plasma electron density in the wake of hypervelocity model, a seven channels Ka-band microwave interferometer measuring system was developed. In the transceiver system, one transmitting antenna to achieve plane wave irradiation plasma, and a seven-port array antenna is used to receive plane waves which passing through the plasma, the antenna beam can completely cover the radial range of the wake. Measuring system shortest response time and electron density measurement range of the interferometer measuring system are 1<teshuzifu>ms and 10<sup>11</sup>-10<sup>13</sup>/cm<sup>3</sup> respectively. Plasma is often treated as layered medium in data processing of multichannel microwave interferometer, consider the effect of refraction on the stratified interface, in this work, the ray tracing(RT) method is used to establish the electromagnetic propagation model, combined with the measurement data to construct the objective function, and the genetic algorithm(GA) is used to invert the radial two-dimensional distribution of the electron density under different test conditions. The result shows that it is in good agreement with the numerical simulation under the same test state, which proves the reliability of the validity of the data processing method. Then, the influence of the layered model on the calculation result is analyzed, which shows that the seven-layers model is suitable for the wake modeling under given experimental conditions, maximizing the number of receiving channels and ensuring the accuracy. RT method is used for the first time to achieve the two-dimensional distribution of electron density in the wake of hypervelocity projectile, and some rules of two-dimensional electron density distribution of the hypersonic model under given experimental conditions are realized.

A quantitative analysis of electronic transport in n- and p-type modulation-doped GaAsBi/AlGaAs quantum well structures

Electronic transport properties of as-grown and thermally annealed n- and p-type modulation-doped GaAsBi/AlGaAs quantum well (QW) structures were investigated. Hall mobility of as-grown, n- and p-type modulation doped QW structures are found from raw experimental data as ∼1414 and 95 cm2 Vs−1 at room temperature. A comparison between reported two-dimensional (2D) electron density determined from the analyses of Shubnikov de Haas oscillations and the 2D Hall electron density indicates a presence of parallel conduction in barrier layer (AlGaAs) and QW layer (GaAsBi) in n-type samples, therefore a parallel channel conduction theory is used to separate the electron mobility in the QW and the barrier layers in n-type modulation doped GaAsBi/AlGaAs QW structure. The extracted electron mobility of the as-grown n-type GaAsBi/AlGaAs QW sample is determined as ∼5975 cm2 Vs−1 at 4.2 K, which is closer to the electron mobility in GaAs. It is found that thermal annealing at lower temperature than growth temperature increases electron mobility of 2D electron gas, while annealing at higher temperature than growth temperature decreases electron mobility. The temperature dependence of the extracted electron mobility using parallel conduction approximation is analytically calculated by considering possible scattering mechanisms. Analysis of temperature-dependent electron mobility shows that the dominant scattering mechanisms are interface roughness (IFR), acoustic, and alloy-potential scatterings at low and intermediate temperature range, and IFR and optical phonon scattering at the high-temperature range in n-type modulation doped GaAsBi/AlGaAs QW structures.