Tukey's Honest Significant Difference Research Articles

Are children with unilateral hearing loss more tired?

ObjectiveTo determine whether children with unilateral sensorineural hearing loss (USNHL) and unilateral conductive hearing loss (UCHL) have higher levels of fatigue than literature reported normal hearing (LRNH) children. MethodsThis was a cross-sectional survey utilizing the PedsQL™ Multidimensional Fatigue Scale administered to children with unilateral hearing loss (UHL) and their parents at two tertiary care academic medical centers and a nationwide microtia/atresia conference. The PedsQL™ Multidimensional Fatigue Scale was used to compare child and parental proxy reports of fatigue among USNHL, UCHL, and LRNH children. ANOVA and post-hoc Tukey Honest Significant Difference testing were used for statistical analysis. ResultsOf 69 children included in the study, 42 had UCHL (61%) and 27 (39%) had USNHL. Children with USNHL reported more total fatigue (mean 69.1, SD 19.3) than LRNH children (mean 80.5, SD 13.3; difference −11.4; 95% CI: −19.98 to −2.84) and children with UCHL (mean 78.0, SD 14.5; difference −8.95; 95% CI: −17.86 to 0.04). Children with UCHL reported similar levels of fatigue compared to LRNH children (difference −2.5; 95% CI: −9.95 to 5.03).Parents of children with USNHL reported greater levels of fatigue (mean 67.6, SD 22.6) in their children than parents of LRNH children (mean 89.6, SD 11.4; difference −22.0; 95% CI: −29.8 to −14.3) and parents of children with UCHL (mean 76.2, SD 17.3; difference −8.6; 95% CI: −17.5 to 0.21). Parents of children with UCHL also report higher levels of fatigue than parents of LRNH children (difference −13.4; 95% CI: −19.98 to −6.84). ConclusionsChildren with USNHL reported greater levels of fatigue than LRNH children and children with UCHL. Results implicate cognitive load as an important consideration in children with hearing loss. The measurement of fatigue may be a useful indicator to determine the benefit of intervention (e.g., amplification) for these children.

The effect of multiple enamel conditioning on enamel micro-hardness

White spot formation is one of the common side effects in orthodontic treatments and multiple enamel conditioning might happen even during on session of fixed orthodontic treatments. The aim of the present study was to evaluate the impact of multiple enamel conditioning with different methods on enamel micro-hardness (MH). In this In vitro experimental study, the buccal surfaces of 105 extracted premolars were evaluated in seven groups: One control and six experimental groups. The enamel conditioning was performed in three ways: Etching with phosphoric acid 37%, etching with phosphoric acid 37% followed by primer application and conditioning with self-etch primer. The conditioning process in each way was also performed twice consecutively. The specimens were submitted in pH cycling model with demineralization and re-mineralization solutions for 14 days. Afterward Vickers MH test was applied with 0.981N force on the teeth for 10 s indentation time. Data were analyzed using One-Way ANOVA and Tukey HSD (honestly significant difference) test for multiple comparisons. A value of P < 0.05 was considered statistically significant. MH analysis showed statistically significant differences between the control group and the other conditioned groups (P < 0.05). The groups conditioned with acid-etch and primer, particularly twice, showed the lowest amount of MH in comparison to other groups. Self-etch primer had the least effect on MH of the enamel. Single time etching without using primer, made no considerable difference when compared to multiple etching. Etching process and covering the enamel with primer decrease enamel MH. Using self-etch primer is a more conservative method of enamel conditioning.

In Vitro Comparison of the Accuracy of Conventional Impression and Four Intraoral Scanners in Four Different Implant Impression Scenarios.

The aim of this study was to compare the trueness and precision of four intraoral scanners (IOSs) and splinted open-tray conventional implant impression (SOCI) in partial and total edentulism. Four gypsum models (Model A-implants at mandibular right second molar, right second premolar, and right canine; Model B- implants at mandibular right canine, left central incisor, and left canine; Model C-implants at mandibular right second molar, right second premolar, right canine, left central incisor, and left canine; and Model D-implants at mandibular right second molar, right second premolar, right canine, left central incisor, left canine, left second premolar, and left second molar) were prepared, and four different IOSs (Aadva IOS, CS 3600, Trios 3, and Emerald) and one polyvinyl siloxane (PVS) were used. Reference models were digitized with a high-resolution industrial scanner, and data were superimposed. Root mean square (RMS) values were calculated by software and defined as deviation values after superimposition. The oneway analysis of variance (ANOVA) test and Tukey honest significant difference (HSD) test were performed to analyze the data (P < .05). For Models A and B, the truest impressions were made with Aadva, followed by CS 3600, PVS, Trios 3, and Emerald, respectively, while for Model C, the truest impressions were made with CS 3600, followed by Aadva, PVS, Trios 3, and Emerald, and for Model D, the truest impressions were made with Aadva, followed by CS 3600, PVS, Emerald, and Trios 3 (P < .05). There was no statistical difference between groups for precision in Models A, B, and C (P > .05); however, PVS showed lower precision values than other groups in Model D (P < .05). In partial edentulism, IOSs are true and precise as SOCI except Emerald. However, the trueness of IOSs is not favorable in total edentulism cases. SOCI with PVS in total edentulism treated with implants is less precise than IOSs.

Accuracy of Different Complete-Arch Digital Scanning Techniques with a Combined Healing Abutment-Scan Body System.

Investigate the effects of three different complete-arch digital implant scanning techniques used with a combined healing abutment-scan body (CHA-SB) system on the accuracy (trueness and precision) and scan time. A poly(methyl methacrylate) master model simulating an edentulous maxilla was fabricated with four parallelly inserted dental implants. A CHA-SB system was attached to each implant. The model surface was scanned using a structured blue light industrial extraoral scanner to achieve a reference model standard tessellation language file (MRM-STL). Three different scanning techniques-(1) conventional technique with unmodified master model, (2) scan body splinting technique using orthodontic elastic ligatures and plastic splint materials, and (3) land-marking technique using pyramid-shaped glass-ceramic markers-were performed. Fourteen consecutive digital scans were made by using an intraoral scanner (IOS) for each technique, converted to an STL file, and superimposed on the MRM-STL. Trueness and precision were calculated for each technique. The scan time was also recorded. The data were analyzed with one-way analysis of variance (ANOVA) and Tukey honest significant difference (HSD) tests (α = .05). Effects of different scanning techniques on the trueness (distance and angular deviations; P < .001) and scan time (P = .002) were statistically significant. For precision, different scanning techniques had only a significant effect on the distance deviation (P < .001). Regarding trueness and precision, none of the scanning techniques was superior to others. The scan body splinting technique led to significantly less scan time.

Evaluation of the effect of anodization-colored titanium abutments and zirconia substructure thickness on zirconia substructure color: An In vitro study.

The aim of this study is to evaluate the effect of anodized titanium abutments and zirconia substructure thickness on the color of zirconia substructure. In this study, an electrochemical anodization setup was prepared for titanium coloring. Commercial titanium, anodization-colored yellow and pink titanium, and zirconia were used as different abutment specimens. Thirty zirconia discs in 0.7, 0.9, and 1.1 mm thickness were prepared from zirconia blocks as zirconia substructure specimens (n = 10). Zirconia substructure specimens of different thicknesses were placed on abutment specimens of different colors and L*, a*, b* values were measured with a spectrophotometer device. Color difference (ΔE) was calculated according to the CIELab formula by comparing the L*, a*, and b* values obtained on the zirconia abutment with the L*, a*, and b* values obtained on the other abutments. Statistical analyzes were performed with two-way analysis of variance and Tukey Honestly Significant Difference (HSD)test (p < 0.05). The increase in the thickness of the substructure resulted in a statistically significant difference on ΔE, L*, a*, and b* values (p < 0.001). The effect of abutment color had no significant effect on ΔE values. The highest ΔE value was 18.10 at zirconia substructure with 0.7 mm thickness when paired with pink-anodized titanium abutment specimens. The thickness of zirconia substructure and the color of titanium abutments affect zirconia substructure color.

Effect of surface treatment on shear bond strength of relining material and 3D-printed denture base.

PURPOSEThis study aimed to analyze the shear bond strength between the 3D-printed denture base and the chairside relining material, according to the surface treatment.MATERIALS AND METHODSCylindrical specimens were prepared using DENTCA Denture Base II. The experimental groups were divided into 6 (n = 10): no surface treatment (C), Tokuyama Rebase II Normal adhesive (A), sandblasting (P), sandblasting and adhesive (PA), sandblasting and silane (PS), and the Rocatec system (PPS). After bonding the chairside relining material to the center of the specimens in a cylindrical shape, they were stored in distilled water for 24 hours. Shear bond strength was measured using a universal testing machine, and failure mode was analyzed with a scanning electron microscope. Shear bond strength values were analyzed using one-way analysis of variance, and Tukey’s honest significant difference test was used for post-hoc analysis (P < .05).RESULTSGroup PPS exhibited significantly higher shear bond strength than all other groups. Groups P and PA displayed significantly higher bond strengths than the control group. There were no significant differences between groups PS and A compared to the control group. Regarding the failure mode, adhesive failure occurred primarily in groups C and A, and mixed failure mainly in groups P, PA, PS, and PPS.CONCLUSIONThe shear bond strength between the 3D-printed denture base and the chairside relining material exhibited significant differences according to the surface treatment methods. It is believed that excellent adhesive strength will be obtained when the Rocatec system is applied to 3D-printed dentures in clinical practice.

Quantitative Measurement of Dysphonia Severity in Patients With Stroke With Unilateral Vocal Cord Palsy.

Unilateral vocal cord palsy (UVCP) is frequently observed in patients with stroke. This study aimed to evaluate the association between objective dysphonia severity and the classification of UVCP in patients with stroke by objectively and quantitatively measuring their phonetic function. We recruited patients with UVCP diagnosed using laryngoscopy after stroke. Subgroups were divided according to UVCP type, and the dysphonia severity index (DSI) and maximum phonation time (MPT) were measured to objectively evaluate dysphonia. The DSI and MPT were compared between subgroups using analysis of variance with Tukey's honest significant difference post hoc test. In total, 103 patients with stroke and UVCP were recruited. We found that a higher UVCP severity possibly had to do with lower DSI and MPT values. We objectively confirmed that phonetic function was worse in patients with stroke with higher UVCP severity, and the DSI and MPT tests can be helpful in determining the severity and need for additional evaluation.

Comparison of Repair Index in Cigarette and Waterpipe Smokers: A Bio-Monitoring Assessment Using Human Exfoliated Buccal Mucosa Cells.

Background:Repair index (RI) using DNA changes reveals the activity of carcinogenesis. Cigarette and waterpipe smoking are important contributors to oral cavity malignancy. The RI in cigarette and waterpipe smokers has not been compared so far. The aim of this study was to compare the RI in cigarette and waterpipe smokers using the human exfoliated buccal mucosa cells.Methods:The exfoliated buccal mucosa cells of 60 cigarette and waterpipe smokers and 20 nonsmokers were evaluated in a case-control study. The number of micronuclei (MN), broken egg (BE), karyorrhexis (KR), and karyolysis (KL) were counted in 1000 cells from randomly selected fields. The RI = (KL + KR)/(MN + BE) was calculated and compared between subjects and controls. Data were analyzed by one-way analysis of variance (ANOVA), Tukey's Honest Significant Difference (HSD), and Spearman's correlation coefficient test at P < 0.05 probability level.Results:The difference of MN (P < 0.0001), BE (P < 0.0001), KR (P < 0.0001), and KL (P < 0.0001) count was significant between cigarette smokers, waterpipe smokers, and nonsmokers. The RI was significantly different between groups (P = 0.007). The RI was significantly higher in cigarette smokers compared to waterpipe smokers (P = 0.04) and nonsmokers (P = 0.009).Conclusions:The RI was significantly higher in cigarette smokers compared to waterpipe smokers. The finding suggests that due to higher interrupted cellular hemostasis, the risk of carcinoma in waterpipe smokers can be greater than that in cigarette smokers.

Comparative analysis of big five personality traits in obese and normal weight type 2 diabetes mellitus patients

Background and Objectives:Type 2 diabetes has multifactorial causation, with obesity and metabolic dysregulation being two of them. Personality traits are also known to influence many metabolic processes and have been associated with the pathogenesis of diabetes as well as obesity. The objective of the study was to analyze the differences in the big five personality traits of normal-weight type 2 diabetes mellitus, obese type 2 diabetes mellitus patients, and healthy controls.Methods:A total of 70 subjects were included in the study after outpatient-based screening, of which 40 were type 2 diabetes patients (20 obese and 20 normal weight) and 30 were healthy controls. After the anthropometric screening, the personality assessment of the subjects was done using the Neuroticism, Extraversion, Openness, Agreeableness, and Conscientiousness-Five Factor Inventory (NEO-FFI). The differences in the scores of each trait for every group were analyzed by analysis of variance (ANOVA) with Tukey’s honest significant difference (HSD) post hoc corrections. The difference in the scores between controls and diabetes patients was also compared by independent samples t-test.Results:The neuroticism score was significantly higher in both the normal-weight diabetes group (P = 0.01) and obese diabetes group (P = 0.02) as compared to the control group. All diabetes patients when compared with healthy controls had a significantly higher neuroticism score (P = 0.00) while their score of openness was significantly lower (P = 0.035) than healthy controls.Interpretation and Conclusion:This study identifies the association of personality with type 2 diabetes mellitus. The diabetes patients have higher neuroticism and lesser openness to experience as traits of personality. Importantly, this association is present irrespective of the obesity status of the patients.

Trends in physician reimbursements and procedural volumes for radiosurgery versus open surgery in brain tumor care: an analysis of Medicare data from 2009 to 2018.

Given its minimally invasive nature and effectiveness, stereotactic radiosurgery (SRS) has become a mainstay for the multimodal treatment of intracranial neoplasm. However, no studies have evaluated recent trends in the use of SRS versus those of open resection for the management of brain tumor or trends in the involvement of neurosurgeons in SRS (which is primarily delivered by radiation oncologists). Here, the authors used publicly available Medicare data from 2009 to 2018 to elucidate trends in the treatment of intracranial neoplasm and to compare reimbursements between these approaches. By using CPT Professional 2019, the authors identified 10 open resection and 9 SRS codes (4 for neurosurgery and 5 for radiation oncology) for the treatment of intracranial neoplasm. Medicare payments (inflation adjusted) and allowed services (number of reimbursed procedures) for each code were abstracted from the Centers for Medicare and Medicaid Services Part B National Summary Data File (2009-2018). Payments per procedure and procedures per 100,000 Medicare enrollees were analyzed with linear regression and compared with tests for equality of slopes (α = 0.05). The average payment per procedure over the study period was compared by using the 2-tailed Welsh unequal variances t-test, and more granular comparisons were conducted by using ANOVA with post hoc Tukey honestly significant difference (HSD) tests. From 2009 to 2018, the number of SRS treatments per 100,000 Medicare enrollees for intracranial neoplasm increased by 3.97 cases/year (R2 = 0.99, p < 0.001), while comparable open resections decreased by 0.34 cases/year (R2 = 0.85, p < 0.001) (t16 = 7.5, p < 0.001). By 2018, 2.6 times more SRS treatments were performed per 100,000 enrollees than open resections (74.9 vs 28.7 procedures). However, neurosurgeon involvement in SRS treatment declined over the study period, from 23.4% to 11.5% of SRS treatments; simultaneously, the number of lesions treated per session increased from 1.46 to 1.84 (R2 = 0.98, p < 0.001). Overall, physician payments from 2013 to 2018 averaged $1816.08 (95% CI $1788.71-$1843.44) per SRS treatment and $1565.59 (95% CI $1535.83-$1595.34) per open resection (t10 = 15.9, p < 0.001). For neurosurgeons specifically, reimbursements averaged $1566 per open resection, but this decreased to $1031-$1198 per SRS session; comparatively, radiation oncologists were reimbursed even less (average $359-$898) per SRS session (p < 0.05 according to the Tukey HSD test for all comparisons). Over a decade, the number of open resections for intracranial neoplasm in Medicare enrollees declined slightly, while the number of SRS procedures increased greatly. This latter expansion is largely attributable to radiation oncologists; meanwhile, neurosurgeons have shifted their involvement in SRS toward sessions for the management of multiple lesions.

Anti-Bacterial effect, fluoride release, and compressive strength of a glass ionomer containing silver and titanium nanoparticles.

Many attempts have been made to enhance the anti-cariogenic properties of the conventional glass ionomer through incorporation of variable materials. However, most importantly, the incorporation of such materials should not jeopardise the physical or mechanical properties of the final restoration. To investigate the effect of adding silver nanoparticles (Ag-NPs) and titanium dioxide nanoparticles (TiO2-NPs) to conventional glass ionomer cement (GIC) on its anti-bacterial effect against Streptococcus mutans (S. mutans), fluoride ion release, and compressive strength (CS). This study was an in vitro investigation where 30-disc specimens were prepared in each of the three studied groups. The specimens were categorized into the control group (Group C), in which conventional GIC was used, and Group Ag and Group Ti, in which 5 wt% of Ag-NP and TiO2-NP were added, respectively, to GIC powder. In each group, the anti-bacterial effect against S. mutans, fluoride ion release at 24 hours and 14 and 28 days, and CS were assessed. Data were analysed using one-way analysis of variance, followed by Tukey honest significant difference post-hoc test. Both Ag and Ti groups showed a significantly higher anti-bacterial effect than the control group. Ag-NP increased fluoride ion release, whereas TiO2-NP decreased fluoride release; however, cumulative ion release of both experimental groups did not differ significantly compared to the control group. Adding Ag-NP and TiO2-NP increased CS, yet only the Ti group showed the highest CS mean value that was statistically significant compared to other groups. Adding 5 wt% TiO2-NP or Ag-NP to conventional GIC significantly increased its anti-bacterial effect and its CS without affecting fluoride release.

Apoptotic and mitotic indices in oral epithelial dysplasia and squamous cell carcinoma: A comparative study.

Assessment of apoptotic cells and mitotic figures using light microscopy is an easy and viable alternative to assess tumour behaviour. To evaluate apoptotic index (AI), mitotic index (MI) and apoptotic to mitotic index ratio (AI: MI) in different grades of oral epithelial dysplasia (OED) and oral squamous cell carcinoma (OSCC) in haematoxylin and eosin-stained (H&E) sections. The study included 45 cases each of OED and OSCC cases which were further subgrouped into groups of 15 each based on their grades. AI, MI and AI/MI were assessed and compared with 15 cases of normal mucosa. Apoptotic cells and mitotic figures were counted using a binocular light microscope equipped with an oculometer grid (20 × 20 squares) on the eyepiece. Cells were counted in 15 grid fields under oil immersion lenses (×100) in a stepladder fashion. AI/MI ratio was calculated. The results obtained were statistically analysed using Analysis of variance and Tukey Honestly Significant Difference tests with SPSS 20 software at a 0.05 significance level. AI increased with increasing grades of dysplasia and decreased with increasing grades of OSCC. MI increased with increasing grades of OED and OSCC. AI/MI increased with increasing grades of OED but decreased with increasing grades of OSCC. In the light of the current observations, AI, MI and AI: MI can be considered as valuable parameters to assess the biological behaviour of OED and OSCC.

Insecticidal and growth regulatory effect of Jatropha curcas and Linum usitatissimum extracts along with new chemistry pesticide spinetoram against Sargodha strain of Rhyzopertha Dominica

Store grain insect pests such as Lesser grain borer (Rhyzopertha dominica) is a key feeder and cause substantial weight loss of wheat during storage. Present study was planned to evaluate insecticidal, repellent and growth regulator potential of botanical extracts of two plants Jatropha curcas and Linum usitatissimum along with Spinetoram against Rhyzopertha Dominica. This study was conducted at the Department of Entomology, University of Agriculture, Faisalabad (UAF) Grain Research, Training, and Storage Management Cell. Each treatment with three replication of 5%, 10%, and 15% concentrations of plant extracts and 100ppm, 200ppm, and 300ppm concentrations of insecticide were used against the adults of R. dominica by using Complete Randomized Design. Insect mortality was taken after 24, 48, and 72 hours after treatment. Data of growth regulation data was observed after 30 and 60 days. Data was analyzed by statistic 8.1 software for analysis of variance at 5% level of significance and treatment means was compared with the help of Tukey's Honestly Significant Difference (THSD) test. After 72 hours, Spinetoram showed maximum percent mortality (84%) followed by J. curcas (19.17%) and L. usitatissimum (12.28%) at their higher concentrations rate. Among treatments, after 60 days of exposure, Spinetoram was proved to be more effective against the R. dominica with maximum growth inhibition (70%) as compared to J. curcas (44%) and Linseed (28%). Overall the results indicated that these plant extracts and Spinetoram can be used as efficient alternatives of synthetic chemicals for management of stored grains insect pests.

Assessing the Potential of Sentinel-2 Derived Vegetation Indices to Retrieve Phenological Stages of Mango in Ghana

In 2020, mango (Mangifera indica) exports contributed over 40 million tons, worth around US$20 billion, to the global economy. Only 10% of this contribution was made from African countries including Ghana, largely due to lower investment in the sector and general paucity of research into the mango value chain, especially production, quality and volume. Considering the global economic importance of mango coupled with the gap in the use of the remote sensing technology in the sector, this study tested the hypothesis that phenological stages of mango can be retrieved from Sentinel-2 (S2) derived time series vegetation indices (VIs) data. The study was conducted on four mango farms in the Yilo Krobo Municipal Area of Ghana. Seasonal (temporal) growth curves using four VIs (NDVI, GNDVI, EVI and SAVI) for the period from 2017 to 2020 were derived for each of the selected orchards and then aligned with five known phenology stages: Flowering/Fruitset (F/FS), Fruit Development (FRD), Maturity/Harvesting (M/H), Flushing (FLU) and Dormancy (D). The significance of the variation “within” and “between” farms obtained from the VI metrics of the S2 data were tested using single-factor and two-factor analysis of variance (ANOVA). Furthermore, to identify which specific variable pairs (phenology stages) were significantly different, a Tukey honest significant difference (HSD) post-hoc test was conducted, following the results of the ANOVA. Whilst it was possible to differentiate the phenological stages using all the four VIs, EVI was found to be the best related with p &lt; 0.05 for most of the studied farms. A distinct annual trend was identified with a peak in June/July and troughs in December/January. The derivation of remote sensing based ‘time series’ growth profiles for commercial mango orchards supports the ‘benchmarking’ of annual and seasonal orchard performance and therefore offers a near ‘real time’ technology for identifying significant variations resulting from pest and disease incursions and the potential impacts of seasonal weather variations.

Penetration and Tensile Strength of Various Impression Materials of Vinylsiloxanether, Polyether, and Polyvinylsiloxane Impression Materials.

Objectives The aim of this study was to evaluate and compare penetration ability and tensile strength among vinylsiloxanether (VSE), polyether (PE), and polyvinylsiloxane (PVS) elastomeric dental impression materials. Materials and Methods The models were constructed for penetration ability test by simulated gingival sulcus width and moist environment. The 0.05, 0.1, and 0.2 mm of simulated gingival sulcus widths were used. Each simulated gingival sulcus width was impressed 10 repeats per one elastomeric impression material. All extension of elastomeric dental impression materials was scaled by Measuring Microscope (MM-11; Nikon, Tokyo, Japan). On the issue of the tensile strength study, the models were constructed following type 1 of the ISO 37:2017 specifications and/or type C of ASTM.D412 specifications. The two-way analysis of variance (ANOVA) and Tukey's honest significant difference test were performed in the penetration ability test. The one-way ANOVA and Dunnett's T3 test were performed in the tensile strength test. The significance level was set at 0.05. Results PE showed the best extension into all widths of simulated sulcus followed by VSE and PVS, respectively. PVS was significantly higher in tensile strength than VSE and PE, while VSE was significantly higher than PE. Conclusion Penetration ability of elastomeric dental impression materials was depended on gingival sulcus width. The wider the sulcular width, the better the penetration ability of elastomeric dental impression materials. PE presented the best penetration ability, while the novel PVS showed highest tensile strength.

Phytochemical Analysis and Antibacterial Activity of Purple Leaf Extract [Graptophyllum pictum (L.) Griff] Against Streptococcus mutans

Background. Streptococcus mutans is the leading cause of dental caries. One of many medicinal plants, purple leaf [Graptophyllum pictum (L.) Griff], which contains flavonoids, alkaloids, tannins, steroids, and saponins, is a potential antibacterial agent.&#x0D; Objective. This study aimed to determine the antibacterial activity of purple leaf extract (Graptophyllum pictum L. Griff) against Streptococcus mutans.&#x0D; Methods. Streptococcus mutans were suspended in several Graptophyllum pictum (L.) Griff extract concentrations in a BHIB medium using the dilution method so that the concentration of 100%, 50%, 25%, 12.5%, 6.25%, 3.12%, 1.56%, 0.78% were obtained. Each tube was incubated for 24 hours, then subcultured in a Tryptone Yeast Extract Cystine medium in a petri dish using a spreader. Each petri dish was set for 24 hours; the growth of the colony, using CFU/mL unit, was manually calculated. The samples were then subjected to microbiological analysis. The Tukey's Honest Significant Difference test was performed to determine if the relationship between the sets of data in the treatment group is statistically significant (p&lt;0.05).&#x0D; Results. Purple leaf extract contains bioactive compounds such as flavonoid, alkaloid, tannin, triterpenoid/ steroid, and saponin. The Minimum Inhibitory Concentration (MIC) of Graptophyllum pictum (L.) Griff against Streptococcus mutans was in concentration 3.125%, and the Minimum Bactericidal Concentration (MBC) was in concentration 6.25%.&#x0D; Conclusion. Purple Leaf Extract [Graptophyllum pictum (L.) Griff] has antibacterial activity against Streptococcus mutans.

Body Composition and On-Ice Skate Times for National Collegiate Athletic Association Division I Collegiate Male and Female Ice Hockey Athletes.

Czeck, MA, Roelofs, EJ, Dietz, C, Bosch, TA, and Dengel, DR. Body composition and on-ice skate times for NCAA Division I collegiate male and female ice hockey athletes. J Strength Cond Res 36(1): 187-192, 2022-This study's purpose was to explore positional differences for an on-ice timed skate test and its relationship to body composition. Male (n = 15) and female (n = 18) collegiate hockey players participated in this study (total n = 33). Each player was categorized by position of forward or defensemen. Dual x-ray absorptiometry assessed total body composition variables of lean, fat, and bone mass as well as regional measures of lean mass, fat mass, and visceral adipose tissue. Total time and section times were determined for the on-ice skating test through a gated automatic timing system at 9, 18, 24, 42, 48, 66, 82, 132, and 148 m. Analysis of variance and Tukey's honest significance difference assessed on-ice skate time differences between positions (p ≤ 0.05). Correlations between body composition variables and skate times were determined for change of direction, skating time, linear skate time, and total skate time. There were no significant differences between positions for skate times (p > 0.05). Body fat percent (p = 0.007; r = 0.55), total fat mass (p = 0.027; r = 0.46), and leg fat mass (p = 0.019; 0.49) were significantly correlated with total skate time in men, whereas only body fat percent was significantly correlated with change of direction (p = 0.022; r = 0.54) and total skate times (p = 0.016; r = 0.56) in women. The total upper-body mass to leg lean mass ratio was significantly correlated with change of direction (p = 0.036; r = 0.50) in women. In conclusion, the results from this study suggest no differences between on-ice skating times between forwards and defensemen. However, body fat percentage was correlated with on-ice skate times in male and female collegiate hockey players.

Study on Optimum IUPAC Adsorption Isotherm Models Employing Sensitivity of Parameters for Rigorous Adsorption System Performance Evaluation

Adsorption cooling technologies driven by low-grade thermal or solar power are used as an energy-efficient alternative to conventional refrigeration and air conditioning systems. Explicit understanding of the adsorption cycles requires precise determination of the performance parameters, replication of the experimental data, and the rigorous study of the adsorption heat transformation method. Hence, the optimum adsorption isotherms model must be identified. Scientists often face difficulties in selecting the suitable isotherm model as there are many models for a particular form of adsorption isotherm. The present study introduces a novel approach for choosing the optimal models for each type of International Union of Pure and Applied Chemistry (IUPAC) classified adsorption isotherm using robust statistical methods. First, the box-and-whisker plots of error identification are employed. Tóth for Type-I(a) and Type-I(b), modified BET for Type-II, GAB for Type-III, Universal for Type-IV(a), and Type-IV(b), Sun Chakrabarty for Type-V, and Yahia et al. for Type-VI were found lower than the other candidate models in box-and-whisker plot. The optimality of our selected models was further verified using analysis of variance (ANOVA), pairwise Tukey honest significant difference (HSD) test, Kruskal–Wallis rank-sum test, and pairwise Wilcoxon rank-sum test. In short, rigorous statistical analysis was performed to identify the best model for each type of isotherm by minimizing error. Moreover, specific cooling effect (SCE) of Maxsorb III/ethanol and silica gel/water pairs were determined. Results showed that Tóth is the optimal isotherm model for the studied pairs, and the SCE values obtained from the model agree well with experimental data. The optimum isotherm model is indispensable for the precise designing of the next generation adsorption cooling cycles.

An Analysis of Playoff Performance Declines in Major League Baseball.

Conforti, CM, HBA, Crotin, RL, RSCC, C, and Oseguera, J. An analysis of playoff performance declines in Major League Baseball. J Strength Cond Res 35(12S): S36-S41, 2021-At present, it is unknown how athletes of varying talent in Major League Baseball (MLB) perform in the postseason as compared with the regular season. Anecdotal evidence from the authors' previous work experience in MLB established the hypothesis that players of higher caliber were expected to perform worse in the playoffs compared with lesser talented cohorts. Publicly available data on 1477 MLB players from 1994 to 2019 were used to separate athletes into excellent, above average, average, and below average pitching, hitting, and defensive groups with respect to Fielding Independent Pitching (FIP), Weighted Runs Created Plus (wRC+), and Errors per Inning Out (EpIO), respectively. Mixed-model analyses of variance with Tukey's Honest Significant Difference post hoc testing was used to determine whether the change in performance was significant within groups at an a priori alpha level of p < 0.05. Within-subject effects' tests were statistically significant within regular season talent groups for FIP, wRC+, and EpIO in comparison with their playoff performance (p < 0.001). Excellent performers suffered most with more than half depreciating in playoff hitting (58%) and pitching performance (52%), yet nearly 80% of 908 fielders retained defensive ability, which was unexpected. Results indicate that teams should consider providing greater mental performance support, implement periodization strategies to taper or lower training workloads, offer team support networks, and anxiety desensitization for excellent MLB performers in approach of the playoffs, as certain aspects of pitching and hitting significantly suffer.

A Clinical Comparative Evaluation Of The Wear Of Enamel Antagonist To Monolithic Zirconia And Metal-Ceramic Crowns.

To evaluate and compare the wear of natural enamel against a metal-ceramic and a monolithic zirconia crown, with the null hypothesis that there is no difference in the wear of enamel between antagonist metal-ceramic and monolithic zirconia crowns. In 30 subjects (irrespective of sex and within the age range of 18 to 40 years), two bilaterally opposing molars (maxillary/mandibular) were prepared to receive monolithic zirconia or metal-ceramic crowns with feldspathic porcelain veneer. A polyvinyl siloxane impression of the opposing arch was taken at the time of cementation and 1 year after cementation. Casts were poured in type III gypsum and scanned, and the images were superimposed on each other. AutoCAD was used to calculate the difference between two images, which corresponded to the linear wear of the antagonist teeth. Statistical analysis of the data was done using one-way analysis of variance (ANOVA) and post hoc Tukey honest significant difference test for intergroup comparison. The P value obtained by one-way ANOVA was 1.1102e-16 (< .05), and by post hoc Tukey test was .001 (< .01). The mean wear of enamel against enamel was 14.8 ± 1.3 μm, enamel against metal-ceramic was 87.1 ± 18.3 μm, and enamel against monolithic zirconia was 59.4 ± 13.6 μm. The P values obtained; ie, 1.1102e-16 (one-way ANOVA) and 0.001 (post hoc Tukey), indicated that the difference in wear of the antagonist tooth between monolithic zirconia and feldspathic porcelain was significant. It can be concluded that monolithic zirconia causes less wear of the antagonist tooth than feldspathic porcelain.