Trimethylammonium Research Articles

Constructing of ultrahigh pH-responsive polycarboxylic copolymers for enhanced recycling cellulase from enzymatic hydrolyzate of corncob resides

The high cost of the enzymatic hydrolysis of lignocellulose is a major problem for the industrialization of lignocellulose-based sugar platform technology. Cellulase recovery is a vital approach to reduce the enzymatic hydrolysis cost. In this study, ultrahigh pH-responsive copolymers (PAMAs) were obtained from methacrylamide, sodium methacrylate and [2-(methacryloyloxy)ethyl]-trimethylammonium chloride. A PAMA addition method coupled with substrate reabsorption was used to efficiently recover cellulase in a narrow pH range. The enzymatic hydrolysis system of corncob resides (pH = 5.0) was supplemented with 1.0 g/L PAMA-1. After hydrolysis, the PAMAs coprecipitate with cellulase when adjusting the pH value of the hydrolysate to 4.4. When coupled with substrate reabsorption, 50 % of the cellulase was recovered. This method therefore represents a feasible solution to reduce the high enzymatic hydrolysis cost of the industrialization of lignocellulose-based sugar platform technology.

Surfactant Regulated Chemical Modification of Rice Straw Powder for Biomass Composite Polyurethane Synthetic Leather

AbstractFor agricultural countries in Aisa, rice straw is a waste product, but also a valuable bioresource, with its recycling methods often drawing widespread attention. In this study, a novel multicomponent extraction method was proposed to perform comprehensive extraction of holocellulose and lignin from rice straw powder (RSP), resulting in modified rice straw powder (MRSP) with different micro‐morphologyies. The results indicate that the cosolvent tetraethylammonium chloride (TEAC) is more effective for extracting holocellulose and lignin compared to others, and different surfactants have decisive impacts on the extraction of holocellulose and lignin from RSP. Among them, anionic surfactants aid in the extraction of holocellulose, with sodium allylate sulfonate (SAS) being superior due to its greater changes in allyl polarity. Conversely, cationic surfactants facilitate the extraction of lignin, with octadearyl trimethyl ammonium chloride (OTAC) being superior due to the length of its alkyl‐carbon chain. And the quantized contribution of hydrophilic and hydrophobic groups of surfactants to the extraction of holocellulose and lignin, as well as, the different micromorphology of MRSP is obtained. Additionally, compared to the traditional PU (polyurethane) modified by eucalyptus wood powder (EWP/PU), the MRSP was used to prepare a series of biomass composite polyurethane synthetic leather (MRSP/PU), its tensile strength and peel strength of MRSP/PU coatings are greatly enhanced at the feedstock of 18 %.

Phage LysSA163-CBD mediated specific recognition coupled with ATP bioluminescence for the sensitive detection of viable Staphylococcus aureus in food matrices

BackgroundStaphylococcus aureus is a significant foodborne pathogen, commonly detected in milk and meat products. Conventional detection methods have limited sensitivity and specificity, which are time-consuming and susceptible to background interference from complex samples, and cannot effectively distinguish live and dead bacteria. ResultsHerein, we developed a novel adenosine triphosphate (ATP) bioluminescence method coupled with magnetic separation, which is based on phage-encoded endolysin LysSA163-CBD (CBD 163) for rapid and specific detection of viable Staphylococcus aureus. The expressed protein (CBD 163) was derived from the phage LSA2301 and was successfully expressed in Escherichia coli BL21 following an induction period of 4 h at 37 °C, with a molecular weight approximating 40 kDa. The optimal conditions for CBD-magnetic beads (cMBs) to capture S. aureus cells were determined to be 100 μL/mL cMBs at 25 °C for 30 min. The viable S. aureus cells were disrupted by the Cetyl trimethyl ammonium bromide (CTAB) to release intracellular ATP. Then, the ATP reacted with the firefly luciferase and D-Luciferin-based bioluminescence (BL) reagents solution to generate intensive BL signal. The CBD-magnetic separation-ATP bioluminescence (cMS-BL) assay was able to quickly detect viable S. aureus via ATP bioluminescence in 45 min, with a detection range from 5 × 103 to 5 × 107 CFU/mL and limit of detection (LOD) of 190 CFU/mL. Additionally, the cMS-BL method exhibited high specificity and anti-interference ability, which has been successfully applied to quantify S. aureus cells in crayfish-tail, chicken, and skim milk. Significance and noveltyThese results demonstrate the potential of CBD 163 as a versatile and robust biorecognition element for rapid and specific detection of viable S. aureus in food matrices. The proposed phage-derived bacteria-binding proteins-based protocol for BL detection shows various advantages, including high sensitivity, simple operation, and the capability to distinguish live bacteria, providing a strategy for designing high-quality biorecognition element toward foodborne pathogens.

Enhanced microplastics removal from sewage effluents via CTAB-modified magnetic biochar: Efficacy and environmental impact

Sewage treatment plants (STPs) are identified as a significant pathway of microplastics (MPs) re-entry into the environment through effluent discharge, thereby emphasizing the need for reliable and efficient treatment methods. This study investigated MPs removal from sewage effluents using cetyl trimethyl ammonium bromide (CTAB)-modified magnetic biochar (RH-MBC-CTAB) as an adsorbent. Biochars from different biomass were synthesized, surface modified, characterized, and compared for their MPs removal efficacy from aqueous matrices. Batch adsorption studies were initially conducted on synthetic water with 1 μm sized polystyrene (PS) MPs using different MP concentrations (1–10 mg/L) and varying adsorbent dosages (1–10 mg/50 mL) to assess the effect of different process parameters, viz. pH (2–10), humic acid (6–25 mg/L), and competitive ions (0.01–0.2 M). The maximum MPs removal (98%) was achieved at the favorable conditions: initial MPs concentration: 10 mg/L, RH-MBC-CTAB dose: 7 mg/50 mL, pH 4, mixing speed: 180 rpm, and contact time: 3 min. Electrostatic attraction and hydrogen bonding were likely to remove MPs while the MPs adsorption was best fitted by the pseudo-second-order kinetics model (R2 = 0.91) and Langmuir isotherm model (R2 = 0.94) with the maximum adsorption capacity of 247.52 mg/g. Further, the application of RH-MBC-CTAB on the real-time sewage effluents from sequencing batch reactor (SBR) and moving bed biofilm reactor (MBBR)-based STPs spiked with MPs showed up to 96% MPs removal. The reusability results revealed that developed RH-MBC-CTAB could maintain good stability for up to three reusability cycles, therefore offering extensive potential for the removal of MPs from sewage effluents.

Dewatering promoting of carbon-rich coal gasification coarse slag by size reduction with surface modification

ABSTRACT Coal gasification coarse slag (CGCS) has become a bulk coal-based solid waste that threatens the ecological environment. The high moisture content of carbon-rich coal coarse gasification slag (CR-CGCS) seriously limits its utilization. In this study, a pore water releasing method was proposed to promote the dewatering of CR-CGCS through size reduction with surface modification. Hexadecyl trimethyl ammonium bromide (CTAB), sodium dodecyl sulfate (SDS), and kerosene were added during the grinding process, respectively. The results showed that kerosene can significantly improve the dewatering efficiency of CR-CGCS more than CTAB and SDS. The final moisture content of the CR-CGCS could be reduced from 47.50% to 33.01%. The SEM and FTIR results illustrated that kerosene could effectively reduce the content of oxygen-containing functional groups on the surface of CR-CGCS more than CTAB and SDS. Meanwhile, the PVM results showed that CR-CGCS modified by kerosene tended to form hydrophobic agglomerates. The LF-NMR results indicated that only the water in the macropores of CR-CGCS could be released in grinding process, but the water in micropores could be reduced when kerosene, CTAB, or SDS was added in grinding. This study provides new insight into enhancing the dewatering of CR-CGCS and theoretical support for the efficient utilization of CR-CGCS.

Synthesis and characterization of etherified cationic starch flocculant derived from Manihot esculenta peel with varying degrees of substitution

Cationic Manihot esculenta (ME) peel starch was synthesized through etherification method using 3-chloro-2-hydroxypropyl trimethylammonium chloride (CHPTAC) as cationizing monomer. The optimization of the main factors influencing the degree of substitution (DS) was conducted using central composite design (CCD) and response surface methodology (RSM). The factors assessed include CHPTAC concentration, catalyst sodium hydroxide (NaOH) concentration, and reaction time. The DS values of the cationic starches were obtained between 0.39 and 0.99. The maximum DS value was up to 0.99 at 0.615 mol/L of CHPTAC, 30 % (w/v) NaOH, and a reaction time of 5 h. The finding based on the optimization using RSM reflected that CHPTAC and NaOH concentrations are the key variables determining the DS value, while reaction time has a negligible impact on the etherification process. Furthermore, the chemical composition, morphology, and structure of the cationic ME peel starch were characterized by scanning electron microscopy with energy dispersive X-ray spectrometry (SEM-EDX), Fourier transform infrared spectroscopy (FTIR), X-ray diffractometry (XRD) and nuclear magnetic resonance spectroscopy (1H NMR). It was confirmed that the modifying monomers penetrated the surface layer of the starch granules and attached to the starch backbone.

Acidified sucralfate encapsulated chitosan derivative nanoparticles as oral vaccine adjuvant delivery enhancing mucosal and systemic immunity

Oral vaccines are generally perceived to be safe, easy to administer, and have the potential to induce both systemic and mucosal immune responses. However, given the challenges posed by the harsh gastrointestinal environment and mucus barriers, the development of oral vaccines necessitates the employment of a safe and efficient delivery system. In recent years, nanoparticle-based delivery has proven to be an ideal delivery vector for the manufacture of oral vaccines. Hence, considering the above, the sucralfate acidified (SA) encapsulated N-2-Hydroxypropyl trimethyl ammonium chloride chitosan (N-2-HACC)/N,O-carboxymethyl chitosan (CMCS) nanoparticles (SA@N-2-HACC/CMCS NPs) were prepared, and the BSA was used as a model antigen to investigate the immune responses. The SA@N-2-HACC/CMCS NPs had a particle size of 227 ± 7.0 nm and a zeta potential of 8.43 ± 2.62 mV. The NPs displayed slow and sustained release and high stability in simulated gastric juice and intestinal fluid. RAW 264.7 macrophage-like cell line demonstrated enhanced uptake of the SA@N-2-HACC/CMCS/BSA Nps. The vaccine via oral administration markedly enhanced the residence time of BSA in the intestine for more than 12 h and elicited the production of IgG and sIgA. The SA@N-2-HACC/CMCS NPs developed here for oral administration is an excellent technique for delivering antigens and provides a path of mucosal vaccine research.

Study on the epoxy bonding properties of polyphenylene sulfide matrix composites reinforced by montmorillonite and basalt fiber

To improve the epoxy bonding properties of polyphenylene sulfide (PPS) matrix composites, CK-MMT and K-BF were prepared by modifying montmorillonite (MMT) and basalt fiber (BF) with cetyl trimethyl ammonium bromide (CTAB) and 3-Glycidyloxypropyltrimethoxysilane (KH-560) as the modifiers. CK-MMT/BF/TPU/PPS composites were prepared by injection moulding. The surface properties of the composites were tested and characterized by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS), etc. The epoxy bonding and mechanical properties were studied by combining the single-lap-joint tensile shear strength test and notched impact test. The results demonstrated the successful preparation of the modified MMT and BF. With the addition of CK-MMT and K-BF in different ratios, the surface roughness and the contents of polar groups of the composites increased, which could effectively improve the epoxy bonding properties of PPS matrix composites. When the additions of CK-MMT and K-BF were 10 and 25 wt%, respectively, the composites had the best overall properties. It demonstrated a single-lap-joint tensile shear strength was 7.56 MPa, representing a 220.34% increase over that of thermoplastic polyurethane/polyphenylene sulfide (TPU/PPS) and a 477.10% increase over that of pure PPS.

Removal of Pb(II) ions from aqueous solutions using natural and HDTMA-modified bentonite and kaolin clays

This work focused on the removal of Pb(II) from aqueous solution using kaolin and bentonite clays modified with hexadecyl trimethyl ammonium bromide (HDTMA). The clays were characterized using a zetasizer, scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), Brunauer-Emmet-Teller (BET), Fourier-transform infrared (FTIR) spectroscopy and thermal gravimetric analysis (TGA). Factors that influence the adsorption of Pb(II) from aqueous solution, namely pH, contact time, adsorbent mass, ionic strength, temperature and initial Pb(II) concentration were investigated. The results show that HDTMA was successfully incorporated into the kaolin and bentonite clay structures. The most favorable parameters for the adsorption of Pb(II) ions onto all adsorbents was pH of 6.0, temperature of 25 °C and adsorbent mass of 200 mg. Adsorption isotherms and kinetic studies showed that the adsorption of Pb(II) onto kaolin, bentonite and organobentonite clays followed the Langmuir isotherm and pseudo-first order kinetic model, while the adsorption onto organobentonite was better explained by the Freundlich isotherm and pseudo-second order kinetic model. Maximum monolayer adsorption capacity of organobentonite, calculated from the Langmuir model was 18.75 mg/g, which is higher than that obtained for the unmodified bentonite (14.71 mg/g); while for organokaolin it was 2.26 mg/g, which is less than that of the unmodified kaolin (4.19 mg/g). Thermodynamic studies showed that the reactions were exothermic and unfavoured at high temperatures. The adsorbents also showed good removal efficiency for up to four regeneration cycles.

Quantitative evaluation of the difference in residual collectors in sulfide and non-sulfide flotation processes

In this study, three separate flotation systems were studied to define the residual collectors found in different recycled water for sulfide (xanthate-chalcopyrite), non-sulfide with anionic (NaOL-dolomite) and cationic (DTAB-quartz) collector processes. The adsorption/desorption of collectors and the adsorption morphology were studied by the zeta potential and atomic force microscopy (AFM) measurements, the adsorption energy and configurations were simulated by the density functional theory-based first principal calculations. It was found that butyl xanthate (BX) was adsorbed on chalcopyrite surface with pronounced protrusions by chemisorption, and the residual BX in slurry was 5.79 %. While sodium oleate (NaOL) formed scattered protrusions on dolomite surface by weak adsorption, the residual NaOL in slurry was 30.74 % that reacted with the Ca2+ or Mg2+ cations. The dodecyl trimethyl ammonium bromide (DTAB) adsorbed on quartz surface through hydrophobic aggregations and the residual DTAB in slurry was 16.57 %. This work might provide a guidance for understanding reagent consumption and flotation performance in typical mineral flotation systems.

Probing of New Polymer-Based Microcapsules for Islet Cell Immunoisolation.

Islet allotransplantation offers a promising cell therapy for type 1 diabetes, but challenges such as limited donor availability and immunosuppression persist. Microencapsulation of islets in polymer-coated alginate microcapsules is a favored strategy for immune protection and maintaining islet viability. This study introduces Poly [2-(methacryloyloxy)ethyl]trimethylammonium chloride (PMETAC) as an innovative coating material for microcapsules. PMETAC enhances biocompatibility and durability, marking a significant advancement in islet encapsulation. Our approach combines alginate with PMETAC to create Langerhans islet microcapsules, simplifying material composition and preparation and ultimately lowering costs and increasing clinical applicability. Our comprehensive evaluation of the stability (including osmotic stability, thermal stability, and culture condition stability) and cytotoxicity of a novel microencapsulation system based on alginate-PMETAC-alginate offers insights into its potential application in islet immunoisolation strategies. Microcapsules with PMETAC content ranging from 0.01 to 1% are explored in the current work. The results indicate that the coatings made with 0.4% PMETAC show the most promising outcomes, remaining stable in the mentioned tests and exhibiting the required permeability. It was shown that the islets encapsulated in this manner retain viability and functional activity. Thus, alginate microcapsules coated with 0.4% PMETAC are suitable for further animal trials. While our findings are promising, further studies, including animal testing, will be necessary to evaluate the clinical applicability of our encapsulation method.

Antibacterial Activity of Novel Agent N-2-Hydroxypropyl Trimethyl Ammonium Chloride Chitosan against Streptococcus mutans.

Dental caries (DC) is one of the most common oral diseases and is mainly caused by Streptococcus mutans (S. mutans). The use of antibiotics against S. mutans usually has side effects, including developing resistance. N-2-Hydroxypropyl trimethyl ammonium chloride chitosan (N-2-HACC), a natural product, has great potential utility in antibacterial agents owing to its low toxicity and good biocompatibility. Thus, the purpose of the present study was to explore the antimicrobial activity of N-2-HACC against S. mutans through the permeability of the cell wall, integrity of cell membrane, protein and nucleic acid synthesis, respiratory metabolism, and biofilm formation. Our results confirmed that the MIC of N-2-HACC against S. mutans was 0.625 mg/mL with a 90.01 ± 1.54% inhibition rate. SEM observed the formation of cavities on the surface of S. mutans after 12 h N-2-HACC treatment. The level of alkaline phosphatase (AKP) activity was higher in the N-2-HACC treatment group than in the control group, indicating that N-2-HACC can improve the permeability of the cell wall. Also, N-2-HACC treatment can destroy the cell membrane of S. mutans by increasing conductivity and absorbance at 260 nm, decreasing cell metabolic activity, and enhancing the fluorescence at 488 nm. Respiratory metabolism revealed that the activities of the Na+-K+-ATP enzyme, pyruvate kinase (PK), succinate dehydrogenase (SDH), and malate dehydrogenase (MDH) were decreased after N-2-HACC treatment, revealing that N-2-HACC can inhibit glycolysis and the tricarboxylic acid cycle (TCA cycle) of S. mutans. Moreover, N-2-HACC can also decrease the contents of the nucleic acid and solution protein of S. mutans, interfere with biofilm formation, and decrease the mRNA expression level of biofilm formation-related genes. Therefore, these results verify that N-2-HACC has strong antibacterial activity against S. mutans, acting via cell membrane integrity damage, increasing the permeability of cell walls, interfering with bacterial protein and nucleic acid synthesis, perturbing glycolysis and the TCA cycle, and inhibiting biofilm formation. It is suggested that N-2-HACC may represent a new potential synthetically modified antibacterial material against S. mutans.

Novel insights into the photochemical transformation of neonicotinoid insecticides: Potential involvement of adjuvants

Commercial pesticide formulations often contain both the active ingredient and different adjuvants, the potential impacts of adjuvants on pesticides’ transformation have been barely considered. In this study, effects of typical adjuvants (i.e. hexadecyl trimethyl ammonium bromide (CTAB), hexadecyl trimethyl ammonium chloride (CTAC) and p-Octyl polyethylene glycol phenyl ether (TX-100)) on the photodegradation of four selected neonicotinoid insecticides (NIs), including thiamethoxam (TMX), dinotefuran (DIN), imidacloprid (IMP) and acetamiprid (ACP) were systematically investigated. Specifically, CTAB and CTAC exhibited minimal or no impact on the photolysis of four NIs, while TX-100 significantly inhibited their decay. Such inhibitory effect could mainly be attributed weakening the formation of key transient intermediates, such as the corresponding radical cation (NI•+), radical anion (NI•-) as well as hydrated electron (eaq-). Photoproducts identification revealed a novel transformation pathway of NIs in the presence of TX-100, characterized by de-chain reactions, resulting in the formation of photostable dimeric photoproducts. These dimers exhibited varying toxicity: for TMX, DIN and IMP, their corresponding dimers showed increased toxicity compared to their parent compounds, whereas for ACP, they displayed decreased toxicity. These provide important information for the evaluation the environmental fates and toxicology of formulaic NIs.

A simple and efficient approach for preparing cationic coating with tunable electroosmotic flow for capillary zone electrophoresis-mass spectrometry-based top-down proteomics

BackgroundCapillary zone electrophoresis-tandem mass spectrometry (CZE-MS/MS) has become a valuable analytical technique in top-down proteomics (TDP). CZE-MS/MS-based TDP typically employs separation capillaries with neutral coatings (i.e., linear polyacrylamide, LPA). However, issues related to separation resolution and reproducibility remain with the LPA-coated capillaries due to the unavoidable non-specific protein adsorption onto the capillary wall. Cationic coatings can be critical alternatives to LPA coating for CZE-MS/MS-based TDP due to the electrostatic repulsion between the positively charged capillary inner wall and proteoform molecules in the acidic separation buffer. Unfortunately, there are only very few studies using cationic coating-based CZE-MS/MS for TDP studies. ResultsIn this work, we aimed to develop a simple and efficient approach for preparing separation capillaries with a cationic coating, i.e., poly (acrylamide-co-(3-acrylamidopropyl) trimethylammonium chloride [PAMAPTAC]) for CZE-MS/MS-based TDP. The PAMAPTAC coating-based CZE-MS produced significantly better separation resolution of proteoforms compared to the traditionally used LPA-coated approach. It achieved reproducible separation and measurement of a simple proteoform mixture and a complex proteome sample (i.e., a yeast cell lysate) regarding migration time, proteoform intensity, and the number of proteoform identifications. The PAMAPTAC coating-based CZE-MS enabled the detection of large proteoforms (≥30 kDa) from the yeast cell lysate reproducibly without any size-based prefractionation. Interestingly, the mobility of proteoforms using the PAMAPTAC coating can be predicted accurately using a simple semi-empirical model. SignificanceThe results render the PAMAPTAC coating as a valuable alternative to the LPA coating to advance CZE-MS-based TDP towards high-resolution separation and highly reproducible measurement of proteoforms in complex samples.

Reinforced facilitated transport PEBA membrane by 2D Fe-doped TiO2 macroporous nanosheets for CO2 separation: Utilizing cationic and non-ionic surfactants

In this study, macroporous nanosheets of 2D Fe-Doped TiO2 were synthesized, and subsequently, membranes composed of polyether block amide (PEBA) were prepared. These membranes were incorporated with the nanosheets mentioned above, as well as two distinct types of surfactant. The structure and gas separation properties of the membranes were studied using different methods, including atomic force microscopy (AFM), differential scanning calorimetry (DSC), Fourier transform infrared (FTIR), scanning electron microscopy (SEM), X-ray diffraction (XRD), as well as gas permeation analyses and tensile test. The findings indicated that the nanosheets underwent a porous transformation following the doping process. This occurrence improved the bonding between the nanosheets and PEBA chains, consequently boosting the mechanical strength of the membranes embedded with these nanosheets. Incorporating these nanosheets into the membrane (4 wt%) established a more efficient facilitated transport mechanism via Lewis acid centers, resulting in a 12.5 % increase in CO2 permeability and a 136 % rise in the selectivity of CO2/N2 compared to the pure PEBA membrane. Two different surfactants were introduced to the PEBA/FeTiO2 matrix, resulting in varying impacts on membrane structure and performance. The Cetyl trimethyl ammonium bromide (CTAB) as a cationic surfactant led to membrane stiffening and a significant 241 % enhancement in CO2/N2 selectivity at 1 wt%. On the other hand, the Polysorbat (Tween) as a non-ionic surfactant softened the membrane and boosted CO2 permeability by 53 % at 6 wt% compared to the pure membrane.

Fabrication of 3D printed mutable drug delivery devices: a comparative study of volumetric and digital light processing printing.

Mutable devices and dosage forms have the capacity to dynamically transform dimensionally, morphologically and mechanically upon exposure to non-mechanical external triggers. By leveraging these controllable transformations, these systems can be used as minimally invasive alternatives to implants and residence devices, foregoing the need for complex surgeries or endoscopies. 4D printing, the fabrication of 3D-printed structures that evolve their shape, properties, or functionality in response to stimuli over time, allows the production of such devices. This study explores the potential of volumetric printing, a novel vat photopolymerisation technology capable of ultra-rapid printing speeds, by comparing its performance against established digital light processing (DLP) printing in fabricating hydrogel-based drug-eluting devices. Six hydrogel formulations consisting of 2-(acryloyloxy)ethyl]trimethylammonium chloride solution, lithium phenyl-2,4,6-trimethylbenzoylphosphinate, varying molecular weights of the crosslinking monomer, poly(ethylene glycol) diacrylate, and paracetamol as a model drug were prepared for both vat photopolymerisation technologies. Comprehensive studies were conducted to investigate the swelling and water sorption profiles, drug release kinetics, and physicochemical properties of each formulation. Expandable drug-eluting 4D devices were successfully fabricated within 7.5s using volumetric printing and were shown to display equivalent drug release kinetics to prints created using DLP printing, demonstrating drug release, swelling, and water sorption properties equivalent to or better than those of DLP-printed devices. The reported findings shed light on the advantages and limitations of each technology for creating these dynamic drug delivery systems and provides a direct comparison between the two technologies, while highlighting the promising potential of volumetric printing and further expanding the growing repertoire of pharmaceutical printing.

Investigation on the flotation of a mixed collector and its mechanism for enhancing low-rank coal flotation: Effect of micro adsorption and its interaction with gangue particle

The flotation effect of the association formed by dodecyl trimethyl ammonium bromide (DTAB) and dodecyl alcohol polyoxyethylene ether sodium sulfate (AES), and nonpolar kerosene mixed collectors on low-rank coal (LRC) was investigated. The results show that the combustible matter recovery was significantly improved compared with a single kerosene from 49.88% to 74.97% when the the mixed collector was used, while concentrate ash content decreased from 9.76% to 8.57% simultaneously. The utilization of the mixed collector not only enhanced the surface hydrophobicity of organic particles but also facilitated the intercoalescence among them, thereby reducing the ash content of concentrate during flotation. The molecular dynamics simulation (MDS) results show that the effect of the mixed collector on the surface of LRC is mainly the electrostatic interaction and hydrogen bonding between the collector molecules and the surface molecules of LRC, which makes the polar molecules in the collector closely adsorbed on the surface of LRC.

Electrochemical Determination of Dopamine with a Carbon Paste-Lanthanum (III) Oxide Micro-Composite Electrode: Effect of Cetyl Trimethyl Ammonium Bromide Surfactanton Selectivity.

This paper presents a new application of a lanthanum oxide (III)-modified carbon paste electrode (LaOX/CPE) for dopamine (DP) detection in the presence of ascorbic acid (AA). The presence of cetyl trimethyl ammonium bromide (CTAB) facilitated the LaOX/CPE electrode's ability to detect DP amidst AA interference, resulting in a substantial 70.0% increase in the anodic peak current for DP when compared to the unmodified carbon paste electrode (CPE). CTAB enabled clear separation of the anodic peaks for DP and AA by nearly 0.2 V, despite their initially overlapping potential values, through the ion-dipole interaction of AA and CTAB. The electrode was characterized using cyclic voltammetry (CV) and energy-dispersive spectroscopy (EDS). The method demonstrated a detection limit of 0.06 µmol/L with a relative standard deviation (RSD) of 6.0% (n = 15). Accuracy was assessed through the relative error and recovery percent, using urine samples spiked with known quantities of DP.

Synthesis of base-acid pair based poly(isatin arylene) membranes for HT-PEMFC applications

Phosphoric acid (PA) doped polymer electrolyte membranes are promising high temperature proton exchange membranes (HT-PEMs) for fuel cells. While PA doped polybenzimidazole (PBI) has been considered as a successful HT-PEM, several issues remain, such as the use of carcinogenic monomer, poor solubility in organic solvents and easy PA loss. To develop more cost-effective, readily synthesized and high-performance HT-PEMs, this study focuses on synthesizing high-performance HT-PEMs based on poly(isatin arylene)s (i.e., PIT and PIB) containing a lactam structure and devoid of ether bonds. These polymers are synthesized from isatin and p-terphenyl (or biphenyl) under superacid catalysis. Subsequently, glycidyl trimethyl ammonium chloride (GTA) is employed as a grafting reagent for PIT and PIB. This ring-opening reaction is accomplished through an efficient and environmentally friendly procedure without any alkaline catalysts. The introduced GTA side chains with quaternary ammonium and hydroxyl groups not only produce microphase separation structures that facilitate proton conduction, but also reduce PA loss. Comparing with PIT-GTA with terphenyl units, the PIB-GTA membrane with short biphenyl units exhibits superior properties. For instance, the PIB-GTA/218.5%PA membrane achieves a high conductivity of 0.103 S cm−1 at 180 °C and a tensile strength of 6.6 MPa at room temperature. Without humidification and backpressure, the PIB-GTA/218.5%PA based H2–O2 single cell displays a peak power density of 632 mW cm−2 at 160 °C. This work presents a straightforward approach to synthesizing GTA grafted poly(isatin arylene) membranes for HT-PEM fuel cells.

Multifunctional Ti3C2Tx-based epoxy composite coating towards intelligent response and corrosion/wear resistance

Questions remain about the unreasonable collocation of Ti3C2Tx and nanocontainers resulting in the performance degradation of multi-function Ti3C2Tx-based epoxy composite coating. Here, mesoporous SiO2 nanocontainers (SNT) containing both potassium thiocyanate and hexadecyl trimethyl ammonium bromide (CTAB) were loaded on MXene-based platform (SNT-on-MP) to achieve a novel epoxy coating (SNT-on-MP@EP) with the integrated functions of self-warning, self-healing, anti-corrosion and anti-wear. In the damaged area, the thiocyanate groups combined with Fe3+ ions to form a blood-red color display, and the formed coordination compound and CTAB as corrosion inhibitors were deposited on the metal substrate, thus showing intelligent response function. Besides, because of passive and active synergistic protection functions, the lowest-frequency impedance value of SNT-on-MP@EP maintained 5.74 × 107 Ω·cm2 after 4 weeks of exposure in salt water environment, which was increased by two orders of magnitude compared with pure epoxy coating. Under the reciprocating sliding friction, the wear rate of SNT-on-MP@EP reached 5.32 × 10−5 mm3/N·m, and was reduced by 58.29 %, owing to the formation of lubricant film at the friction interface and the enhancement of the deformation resistance of the coating. The reasonable collocation of SNT and Ti3C2Tx-based platform eliminated the problem of weak interaction between traditional inorganic nanocontainer and water-based epoxy coating, thus giving full play to the advantages of both.