Trapping Force Research Articles

Synergistic-potential engineering enables high-efficiency graphene photodetectors for near- to mid-infrared light

High quantum efficiency and wide-band detection capability are the major thrusts of infrared sensing technology. However, bulk materials with high efficiency have consistently encountered challenges in integration and operational complexity. Meanwhile, two-dimensional (2D) semimetal materials with unique zero-bandgap structures are constrained by the bottleneck of intrinsic quantum efficiency. Here, we report a near-mid infrared ultra-miniaturized graphene photodetector with configurable 2D potential well. The 2D potential well constructed by dielectric structures can spatially (laterally and vertically) produce a strong trapping force on the photogenerated carriers in graphene and inhibit their recombination, thereby improving the external quantum efficiency (EQE) and photogain of the device with wavelength-immunity, which enable a high responsivity of 0.2 A/W–38 A/W across a broad infrared detection band from 1.55 to 11 µm. Thereafter, a room-temperature detectivity approaching 1 × 109 cm Hz1/2 W−1 is obtained under blackbody radiation. Furthermore, a synergistic effect of electric and light field in the 2D potential well enables high-efficiency polarization-sensitive detection at tunable wavelengths. Our strategy opens up alternative possibilities for easy fabrication, high-performance and multifunctional infrared photodetectors.

Acoustic trapping in the undergraduate laboratory

Acoustic trapping is used in modern biophysics laboratories to study cell adhesion or aggregation, to sort particles, or to build model tissues. Here, we create an acoustic trapping setup in liquid for an undergraduate instructional laboratory that is low-cost, easy to build, and produces results in a 1-hour laboratory period. In this setup, we use a glass slide, cover slip, and double-sided tape to make the sample chamber. A piezo-electric transducer connected to a function generator serves as the acoustic source. We use this setup to measure the node spacing (millimeters) and the acoustic trap force (picoNewtons). We anticipate that the simplicity of the experimental setup, the tractability of the theoretical equations, and the richness of the research topics on the subject will lead to an undergraduate laboratory with many interesting student projects.

Enhanced trapping properties induced by strong LSPR-exciton coupling in plasmonic tweezers.

Plasmonic tweezers break the diffraction limit and enable trap the deep-subwavelength particles. However, the innate scattering properties and the photothermal effect of metal nanoparticles pose challenges to their effective trapping and the non-damaging trapping of biomolecules. In this study, we investigate the enhanced trapping properties induced by strong coupling between localized surface plasmon resonances (LSPR) and excitons in plasmonic tweezers. The LSPR-exciton strong coupling exhibits an anticrossing behavior in dispersion curves with a markable Rabi splitting of 196 meV. Plasmonic trapping forces on excitons experience a significant increase within this strong coupling system due to higher longitudinal enhancement of electric field enhancement, which enables efficient particle trapping using lower laser power and minimizes ohmic heat generation. Moreover, leveraging strong coupling effects allows the successful trapping of a 50 nm Au particle coated with J-aggregates, overcoming previous limitations associated with scattering characteristics and smaller size that hindered effective metal nanoparticle manipulation. These findings open up new possibilities for the nondestructive trapping of biomolecules and metal nanoparticles across various applications.

Direct dielectrophoretic characterization of particles in the high-density microwell array using optical tweezers

In this work, a quantitative and intuitive measurement of dielectrophoresis (DEP) behavior in a high-density dielectrophoretic microwell array chip was accomplished in assistance with the holographic optical tweezers. A one-dimensional force balance system with high reliability was achieved between the transverse optical trapping (TOT) force and the DEP force. The value of the DEP force was inferred by accurately calculating the TOT force, and the direction of the DEP force was observed with high-magnification microscopy. In order to estimate the availability and operability of the DEP force measurement system, we systematically investigated the influences of various external factors on the DEP behaviors of microspheres and live cells. All the quantitative measurement results, which agree well with the theory, showed that this system could serve as an accurate research tool for DEP behavior characterizations to optimize and improve the DEP-based manipulations of microparticles and live cells for a broad range of applications. The system also provides an approach to quantitatively obtain important parameters such as Clausius-Mossotti factors for cells in mediums, which could potentially be used to understand the dielectric properties of different types of cells for cell differentiation and diagnosis at the single-cell level.

Enhancing gradient force over scattering force for nano-trapping through compensating for aberration

One challenge of optical trapping of nanoparticles is the weak trapping force compared to the destabilizing pushing force. Here we enhance the optical gradient force (GF), which is responsible for trapping, to achieve stable nanoparticle trapping through aberration compensation. The optical forces are calculated using multipole expansion theory and the focused fields are determined using Debye focusing theory accounting for interface aberrations between oil, glass, and water. With typical oil immersion objectives, the glass-water interface aberration reduces the GF relative to the scattering force (SF), leading to unstable trapping. By optimizing the refractive index of the immersion oil, the interface aberrations can be compensated. This significantly enhances the GF while moderately improves the SF, enabling stable nanoparticle trapping. The enhancements are particularly notable for large probe depths. Further improvement can be achieved with a thicker oil layer. With optimized conditions, the GF exceeds the SF by over two-fold. And the minimum axial force and axial stiffness increased approximately three-fold. Our study provides theoretical guidance to improve nanoparticle trapping efficiency through aberration compensation and force optimization.

Acoustic Trapping and Manipulation of Hollow Microparticles under Fluid Flow Using a Single-Lens Focused Ultrasound Transducer.

Microparticle manipulation and trapping play pivotal roles in biotechnology. To achieve effective manipulation within fluidic flow conditions and confined spaces, it is necessary to consider the physical properties of microparticles and the types of trapping forces applied. While acoustic waves have shown potential for manipulating microparticles, the existing setups involve complex actuation mechanisms and unstable microbubbles. Consequently, the need persists for an easily deployable acoustic actuation setup with stable microparticles. Here, we propose the use of hollow borosilicate microparticles possessing a rigid thin shell, which can be efficiently trapped and manipulated using a single-lens focused ultrasound (FUS) transducer under physiologically relevant flow conditions. These hollow microparticles offer stability and advantageous acoustic properties. They can be scaled up and mass-produced, making them suitable for systemic delivery. Our research demonstrates the successful trapping dynamics of FUS within circular tubings of varying diameters, validating the effectiveness of the method under realistic flow rates and ultrasound amplitudes. We also showcase the ability to remove hollow microparticles by steering the FUS transducer against the flow. Furthermore, we present potential biomedical applications, such as active cell tagging and navigation in bifurcated channels as well as ultrasound imaging in mouse cadaver liver tissue.

Born approximation of trapping forces by acoustical Bessel and vortex fields.

Acoustic radiation forces have been used to trap various objects for fundamental studies and practical applications. Born approximation method, originally introduced to solve quantum scattering problems, is herein extended to analyze trapping forces exerted by two- and three-dimensional acoustic Bessel and vortex fields on spherical and nonspherical objects of arbitrary size. The results are compared with the conventional models like the partial wave expansion and Gorkov force potential. It is shown that for weakly scattering objects (such as common soft biological particles surrounded by fluids), the Born approximation can make predictions for the trapping forces on objects whose characteristic lengths are even up to multiple wavelengths of the sound beams. With the aid of the approximation, the Gorkov force potential is applied to analyze and gain insights into trapping forces on large objects far beyond the original Rayleigh scattering regime. The effects caused by the beam parameters, object shape, and orientation on the trapping behaviors are revealed. This work is useful for the further study of acoustic radiation forces and will guide the experiment of simplified acoustic tweezers on arbitrary-shaped particles.

Optical fiber probe with a concave cavity for non-contact trapping

We demonstrate a non-contact trapping of a yeast cell by an optical fiber probe with a micron-size concave cavity both theoretically and experimentally. We fabricate the optical fiber tip with a micron-size concave cavity by the improved tube etching method. The size of the concave cavity can be controlled by the etching parameters, such as the etching time, the etching solution, and so on. The output fields from the fiber tips with concave cavities of two geometrical sizes (microns and tens of microns) are computed and analyzed. Then the optical forces on a yeast cell by these concave fiber tips (CFTs) are calculated and discussed. The theoretical results predicate that a micron-size CFT can be used for non-contact trapping of a yeast cell. We observe the non-contact trapping of a yeast cell by a micron-size CFT in the experiments and measure the trapping forces. The optical trapping and manipulation based on these micron-size CFTs may provide versatile applications in bio-science and medical research.

All-fiber rotary micromotor based on laser-induced thermal convection

Micromotors based on fiber optical tweezers (OTs) hold exciting prospects for studying rotary motor proteins, observing the microscopic properties of fluids, and diagnosing diseases. In this paper, we report an all-fiber, OTs-based, rate-controllable, rotary micromotor using laser-induced thermal convection. The optical trapping force can stably trap a microparticle in water. The laser can heat a gold film on the fiber probe of the OTs to form a temperature gradient, leading to a water flow with a velocity gradient that continuously rotates the microparticle. Simulation results prove the feasibility of this method. In addition, experiments show that when the incident laser power is higher, the velocity gradient of water flow near the fiber probe is greater, and the microparticle rotates faster. The rotation rate varies from 12 to 80 rpm. This rotary micromotor has potential applications in microfluidic pumping, biopsy, micromanipulation, etc.

Optical force conversion and conveyor belt effect with coupled graphene plasmon waveguide modes.

We propose a double-layer graphene sheets side coupling to a strip of graphene to obtain the optical pulling or pushing force. Combined with coupled mode theory and finite-difference time-domain simulations, it is found that the conveyor belt effect can be realized in conjunction with the lateral optical equilibrium effect upon the radiation loss κe equal to the intrinsic loss κo. The maximum total optical force acting on the strip in the symmetric mode (S-mode) can be up to ∼5.95 in the unit of 1/c and the anti-symmetric (AS-mode) mode reach ∼2.75 1/c. The optical trapping potential Ux and optical trapping force Fx for the S-mode have a value around -22.5 kBT/W and 240 pN/W, while for the AS-mode can up to ∼-56 kBT/W and 520 pN/W, respectively. Our work opens a new avenue for optical manipulation with potential applications in optoelectronic devices and lab-on-a-chip platforms.

Hypothermal opto-thermophoretic tweezers

Optical tweezers have profound importance across fields ranging from manufacturing to biotechnology. However, the requirement of refractive index contrast and high laser power results in potential photon and thermal damage to the trapped objects, such as nanoparticles and biological cells. Optothermal tweezers have been developed to trap particles and biological cells via opto-thermophoresis with much lower laser powers. However, the intense laser heating and stringent requirement of the solution environment prevent their use for general biological applications. Here, we propose hypothermal opto-thermophoretic tweezers (HOTTs) to achieve low-power trapping of diverse colloids and biological cells in their native fluids. HOTTs exploit an environmental cooling strategy to simultaneously enhance the thermophoretic trapping force at sub-ambient temperatures and suppress the thermal damage to target objects. We further apply HOTTs to demonstrate the three-dimensional manipulation of functional plasmonic vesicles for controlled cargo delivery. With their noninvasiveness and versatile capabilities, HOTTs present a promising tool for fundamental studies and practical applications in materials science and biotechnology.

A new spin on Ashkin's laser trapping forces in the ray optics regime

We repeat the derivation of the forces of a single-beam gradient laser trap on a dielectric sphere in the ray optics regime as first reported by Ashkin; in this case, however, we investigate the impact of partial absorption of light by the sphere on these trapping forces. Our model indicates that the effect of absorption is to reduce the axial and transverse trapping forces as a function of absorption, as well as changing the axial trap position. The trap stiffness is predicted to remain relatively unchanged even for high levels of absorption. The model also predicts that a rotational force is imparted on the sphere as a consequence of absorption. The torque associated with a single ray is first derived, which is shown to increase as a function of both absorption, radius, and the angle of incidence. This enables a derivation of the torque acting on a trapped sphere as it is laterally displaced from the trapping position, which is found to increase linearly with respect to the transverse displacement of the sphere. The torque is derived to be zero for the case of no absorption, and also for the case of axial displacement of the sphere, regardless of absorption. The model reduces exactly to Ashkin's model for the case of zero absorption.

Achiral nanoparticle trapping and chiral nanoparticle separating with quasi-BIC metasurface.

Dielectric metasurfaces based on quasi-bound states in the continuum (quasi-BICs) are a promising approach for manipulating light-matter interactions. In this study, we numerically demonstrate the potential of silicon elliptical tetramer dielectric metasurfaces for achirality nanoparticle trapping and chiral nanoparticle separation. We first analyze a symmetric tetramer metasurface, which exhibits dual resonances (P1 and P2) with high electromagnetic field intensity enhancement and a high-quality factor (Q-factor). This metasurface can trap achiral nanoparticles with a maximum optical trapping force of 35 pN for 20 nm particles at an input intensity of 100 mW. We then investigate an asymmetric tetramer metasurface, which can identify and separate enantiomers under the excitation of left-handed circularly polarized (LCP) light. Results show that the chiral optical force can push one enantiomer towards regions of the quasi-BIC system while removing the other. In addition, the proposed asymmetric tetramer metasurface can provide multiple Fano resonances (ranging from R1 to R5) and high trap potential wells of up to 33 kBT. Our results demonstrate that the proposed all-dielectric metasurface has high performance in nanoparticle detection, with potential applications in biology, life science, and applied physics.

Deep learning-based method for analyzing the optically trapped sperm rotation

Optical tweezers exert a strong trapping force on cells, making it crucial to analyze the movement of trapped cells. The rotation of cells plays a significant role in their swimming patterns, such as in sperm cells. We proposed a fast deep-learning-based method that can automatically determine the projection orientation of ellipsoidal-like cells without additional optical design. This method was utilized for analyzing the planar rotation of trapped sperm cells using an optical tweezer, demonstrating its feasibility in extracting the rotation of the cell head. Furthermore, we employed this method to investigate sperm cell activity by examining variations in sperm rotation rates under different conditions, including temperature and laser output power. Our findings provide evidence for the effectiveness of this method and the rotation analysis method developed may have clinical potential for sperm quality evaluation.

Multi-physics simulations and experimental comparisons for the optical and electrical forces acting on a silica nanoparticle trapped by a double-nanohole plasmonic nanopore sensor

Bimodal optical-electrical data generated when a 20 nm diameter silica (SiO2) nanoparticle was trapped by a plasmonic nanopore sensor were simulated using Multiphysics COMSOL and compared with sensor measurements for closely matching experimental parameters. The nanosensor, employed self-induced back action (SIBA) to optically trap nanoparticles in the center of a double nanohole (DNH) structure on top a solid-state nanopores (ssNP). This SIBA actuated nanopore electrophoresis (SANE) sensor enables simultaneous capture of optical and electrical data generated by several underlying forces acting on the trapped SiO2 nanoparticle: plasmonic optical trapping, electroosmosis, electrophoresis, viscous drag, and heat conduction forces. The Multiphysics simulations enabled dissecting the relative contributions of those forces acting on the nanoparticle as a function of its location above and through the sensor's ssNP. Comparisons between simulations and experiments demonstrated qualitative similarities in the optical and electrical time-series data generated as the nanoparticle entered and exited from the SANE sensor. These experimental parameter-matched simulations indicated that the competition between optical and electrical forces shifted the trapping equilibrium position close to the top opening of the ssNP, relative to the optical trapping force maximum that was located several nm above. The experimentally estimated minimum for the optical force needed to trap a SiO2 nanoparticle was consistent with corresponding simulation predictions of optical-electrical force balance. The comparison of Multiphysics simulations with experiments improves our understanding of the interplay between optical and electrical forces as a function of nanoparticle position across this plasmonic nanopore sensor.

Optical patterning fullerene nanostructures with high purity and high surface quality

Nanoscale patterning of fullerene materials with peculiar intrinsic electronic and optical properties is of crucial importance for their widespread applications. However, it remains a daunting challenge for current methods that suffer from both complicated lithography procedures and additives of photopolymers or photochemicals detrimental to the pristine properties of fullerene. Here, we developed a contamination-free laser printing approach for in situ patterning of fullerene with nanoscale resolution and high purity. The optical trapping force within the tight focus provides a lithography-free means to form densely packed fullerene nanostructures with two-order-of-magnitude enhanced fluorescence emission and a surface roughness of 6 nm. In addition, versatile fullerene nano-patterns from dots to concentric rings can be realized by flexibly shaping the optical trapping force of higher-order Laguerre–Gaussian beams. These results open a new route to programmable and high-quality patterning of fullerene optoelectronic devices with complex nanostructures.

Robust acoustic trapping and perturbation of single-cell microswimmers illuminate three-dimensional swimming and ciliary coordination

We report a label-free acoustic microfluidic method to confine single, cilia-driven swimming cells in space without limiting their rotational degrees of freedom. Our platform integrates a surface acoustic wave (SAW) actuator and bulk acoustic wave (BAW) trapping array to enable multiplexed analysis with high spatial resolution and trapping forces that are strong enough to hold individual microswimmers. The hybrid BAW/SAW acoustic tweezers employ high-efficiency mode conversion to achieve submicron image resolution while compensating for parasitic system losses to immersion oil in contact with the microfluidic chip. We use the platform to quantify cilia and cell body motion for wildtype biciliate cells, investigating effects of environmental variables like temperature and viscosity on ciliary beating, synchronization, and three-dimensional helical swimming. We confirm and expand upon the existing understanding of these phenomena, for example determining that increasing viscosity promotes asynchronous beating. Motile cilia are subcellular organelles that propel microorganisms or direct fluid and particulate flow. Thus, cilia are critical to cell survival and human health. The unicellular alga Chlamydomonas reinhardtii is widely used to investigate the mechanisms underlying ciliary beating and coordination. However, freely swimming cells are difficult to image with sufficient resolution to capture cilia motion, necessitating that the cell body be held during experiments. Acoustic confinement is a compelling alternative to use of a micropipette, or to magnetic, electrical, and optical trapping that may modify the cells and affect their behavior. Beyond establishing our approach to studying microswimmers, we demonstrate a unique ability to mechanically perturb cells via rapid acoustic positioning.

Tunable plasmonic tweezers based on graphene nano-taper for nano-bio-particles manipulation: numerical study.

We take advantage of graphene nano-taper plasmons to design tunable plasmonic tweezers for neuroblastoma extracellular vesicles manipulation. It consists of Si/SiO2/Graphene stack topped by a microfluidic chamber. Using plasmons of isosceles-triangle-shaped graphene nano-taper with a resonance frequency of 6.25 THz, the proposed device can efficiently trap the nanoparticles. The plasmons of graphene nano-taper generate a large field intensity in the deep sub-wavelength area around the vertices of the triangle. We show that by engineering the dimensions of the graphene nano-taper and an appropriate choice of its Fermi energy, the desired near-field gradient force for trapping can be generated under relatively low-intensity illumination of the THz source when the nanoparticles are placed near the front vertex of the nano-taper. Our results show that the designed system with graphene nano-taper of L = 1200 nm length and W = 600 nm base size and THz source intensity of I = 2 mW/µm2, can trap polystyrene nanoparticles with diameters of D = 140, 73, and 54 nm, and with trap stiffnesses of ky = 9.9 fN/nm, ky = 23.77 fN/nm, and ky = 35.51 fN/nm at Fermi energies of Ef = 0.4, 0.5, and 0.6 eV, respectively. It is well known that the plasmonic tweezer as a high-precision and non-contact means of control has potential applications in biology. Our investigations demonstrate that the proposed tweezing device with L = 1200 nm, W = 600 nm, and Ef = 0.6 eV can be utilized to manipulate the nano-bio-specimens. So that, at the given source intensity, it can trap the neuroblastoma extracellular vesicles, which are released by neuroblastoma cells and play an important role in modulating the function of neuroblastoma cells and other cell populations, as small as 88 nm at the front tip of isosceles-triangle-shaped graphene nano-taper. The trap stiffness for the given neuroblastoma extracellular vesicle is obtained as ky = 17.92 fN/nm.

Microparticle optical trapping of silica gel by Au-NP Q-switched fiber laser pulses

This study demonstrates a method for microparticle optical trapping of silica gel using a stable Q-switched fiber laser (QFL) pulse. Gold nanoparticle (Au-NP) were fabricated as saturable absorbers on a side-polished optical fiber (SPF) to achieve stable QFL pulses of frequencies 25.81 kHz. Silica gel microparticles with a radius of 300–400 µm produced a dissimilar attractive trapping force based on the viscous drag exerted on the light field of the QFL. Shifts were observed at wavelengths of 1533.8–1541.0 nm and frequencies of 25.81–28.87 kHz. The validity of the numerical model is proven and the proposed model can be applied to examine the behavior of surface plasmon polaritons (SPP) modes in microparticle optical trapping. These findings confirm that the proposed system facilitates absorption microparticle trapping at the 1540 nm wavelength region.

Blue-Detuned Magneto-optical Trap of Molecules.

Direct laser cooling of molecules has reached a phase-space density exceeding 10^{-6} in optical traps but with rather small molecular numbers. To progress toward quantum degeneracy, a mechanism that combines sub-Doppler cooling and magneto-optical trapping would facilitate near unity transfer of ultracold molecules from the magneto-optical trap (MOT) to a conservative optical trap. Using the unique energy level structure of YO molecules, we demonstrate the first blue-detuned MOT for molecules that is optimized for both gray-molasses sub-Doppler cooling and relatively strong trapping forces. This first sub-Doppler molecular MOT provides an increase of phase-space density by 2 orders of magnitude over any previously reported molecular MOT.