Transportation Costs Research Articles

How to choose mobile energy storage or fixed energy storage in high proportion renewable energy scenarios: Evidence in China

With the large-scale integration of renewable energy and changes in load characteristics, the power system is facing challenges of volatility and instability. Therefore, enhancing the safe and stable operation capability of the power system is an urgent problem that needs to be solved. Mobile energy storage can improve system flexibility, stability, and regional connectivity, and has the potential to serve as a supplement or even substitute for fixed energy storage in the future. However, there are few studies that comprehensively evaluate the operational performance and economy of fixed and mobile energy storage systems. To comprehensively evaluate the economic benefits of large-scale mobile energy storage systems, this paper constructs an overall horizontal cost model for energy storage systems that considers the power system and train transportation system. This model not only introduces the traditional concept of lifecycle cost of energy storage systems, but also considers the costs of traditional transmission lines and battery transportation. Secondly, to achieve simulation of large-scale mobile energy storage system planning and operation, this paper establishes a multi-region power planning and operation simulation (MPO) model and a battery transportation and logistics (BTL) model to accurately reflect the operation mode of fixed energy storage and mobile energy storage in the power system. Finally, taking the actual power grids and railway networks in Northeast and North China as case studies, this article provides an in-depth analysis of the technical, economic, and environmental performance of large fixed and mobile energy storage systems, and conducts a detailed comparison. The research results indicate that under high grid connection ratios (using 75% and 66% as examples), the overall cost of mobile energy storage systems continues to decrease to 1.42 CNY/kWh and 0.98 CNY/kWh. Compared to fixed energy storage at 5.45 CNY/kWh and 4.79 CNY/kWh, it has an absolute economic advantage and shows significant carbon reduction capabilities, reaching 241,800 to 1,394,600 tons. This discovery fully confirms the enormous potential and application value of mobile energy storage in high proportion renewable energy scenarios, providing strong technical support and economic analysis basis for the sustainable development of the power system.

Effects of Paclobutrazol on Reproductive and Vegetative Traits of Phalaenopsis Join Grace 'TH288-4'.

Phalaenopsis is the most popular potted plant worldwide. However, its typically long stalks often lead to increased shipping costs and risks. This study investigates the effectiveness of varying the concentration, timing, and frequency of paclobutrazol (PP333) applications on shortening the stalk of Phalaenopsis Join Grace 'TH288-4'. Concurrently, it also examines the potential for producing visually appealing and single-flower potted phalaenopsis products by means of truncation. Mature phalaenopsis plants were moved to a cool room in the seventh week to induce flowering. Four experimental groups were established based on different PP333 application schedules: the control (CK) group, with reverse osmosis water application in the second week; the T2 group, with a single application in the second week; the T2T3 group, with applications in both the second and third weeks; and the T7T8 group, with applications in the seventh and eighth weeks. The PP333 concentrations used were 250, 500, 750, and 1000 mg·L-1, applied as foliar sprays. The results showed that the shortest stalks, measured from the base to the first flower, were observed in the T2 group treated with PP333 at 750 mg·L-1 and in the T2T3 group with PP333 at 500, 750, and 1000 mg·L-1. These treatments resulted in stalk lengths of 19.18-22.17 cm, which are 67.2-71.6% shorter than the controls. PP333 application had minimal effect on the stalk diameter, pedicel length, flower width, length, and length/width ratio. However, root diameter was thicker in plants treated with PP333 compared with the control plants. For producing single-flower phalaenopsis, a foliar spray of 750 mg·L-1 PP333 is recommended approximately a month before moving the plants to cooler conditions, followed by truncation, retaining only the first flower. As a result, this study establishes a PP333 treatment protocol for phalaenopsis, offering a strategy to effectively shorten the stalks.

A novel development of hybrid maximum power point tracking controller for solar pv systems with wide voltage gain DC-DC converter

Now, the present power generation and distribution companies are working on renewable energy systems because their features are low-level atmospheric pollution, producing less greenhouse pollutants, more reliability, good static performance, and high robustness. In this work, the sunlight Photovoltaic (PV) system is selected because of its advantages are easily available in the atmosphere, high flexibility, zero carbon footprint, easy to maintain, and less transportation cost. However, solar networks produce nonlinear I-V characteristics. Due to the non-linear nature of the solar system, the extraction of peak voltage from the PV module is a very tough task. So, in this article, a variable modified step grey wolf method is integrated with the adaptive-neuro-fuzzy-inference-system to improve the energy production of solar systems. The features of this proposed maximum power point tracking controller are fast identification of the solar system operating point, generating the less fluctuated oriented converter load power, providing more MPP tracking accuracy, less dependence on the solar system installation, and useful for all environmental bad weather conditions. Another problem of solar systems is less voltage production which is improved by introducing a wide voltage gain-boost converter circuit. The features of this converter circuit are less development cost because it does not require more power electronics switches. Here, the proposed IGWM with an AFLC-fed sunlight system is investigated by using MATLAB/Simulink.

Land valuation in the metaverse: location matters

Abstract In urban economics, transportation costs are a key determinant of land value. However, in virtual worlds, these costs are generally limited by the users’ ability to teleport. Drawing from urban and attention economic literature, we propose a theoretical model microfounded on user behavior. The model suggests that the relative value of land parcels hinges on their potential to attract visitors. Our empirical analysis supports this by demonstrating that location remains crucial in virtual worlds and highlighting the role of the teleportation threshold. We discuss the model’s general applicability, reaffirming the significance of location within most virtual worlds.

Powering hydrogen refueling stations with local renewable curtailment – A Lanzhou case study

To promote a hydrogen economy in the near term, in this work, curtailed power from renewable generation in Northwest China is used as the energy source for electrolytic H2. The feasibility of involving methanol as a liquid energy carrier is also explored considering the relatively high cost and safety risk of H2 storage and transportation. Four technology routes including both centralized and distributed versions of pure hydrogen and methanol-mediated supply chains for local H2 consumption at refueling stations are investigated with real-world scenarios in Lanzhou, China. The capacity of existing solar photovoltaics (PVs) is obtained from remote sensing images and a generic supply chain optimization model is developed to compute the minimum levelized cost of hydrogen (LCOH) for each route. Greenhouse gas (GHG) emissions and safety considerations are also assessed for each route. It was found that the green methanol route is the safest with GHG emissions being higher than expected.

Closed-loop supply chain network of end-of-life wind turbines mathematical model proposal considering environmental, employment, and cost reduction aspects

The worldwide climate issue makes wind energy an attractive renewable energy source. Wind energy reduces carbon emissions, energy prices, creates jobs, improves power access, and ensures energy security. The mass of employed materials in wind turbines indicates a lot of potential raw materials when the whole mass is evaluated. Additionally, a new wind turbine costs $2–$4 million. Remanufacturing or using recycled raw materials from end-of-life wind turbines is practical due to the decreased cost of new wind turbines. To ensure sustainability, CO2 emissions and social advantages like employment must be considered. Given the typical life expectancy of wind turbines at 20–25 years, this issue must be addressed globally in the mid-term. The objective of the conducted study is to provide a multi-objective mathematical framework that encompasses the environmental, social, and economic aspects of wind turbines at the end of their operational lifespan. Hence, this study presents a methodical framework for achieving sustainability in the wind energy sector through the implementation of a closed-loop supply chain. Furthermore, a lexicographic solution approach is offered for each objective of the mathematical model, with the aim of providing decision makers with a comprehensive overview of solutions. The methodology employed in this work involves the utilization of a mixed-integer linear programming (MILP) approach to address the closed-loop supply chain for end-of-life wind turbines. Additionally, a lexicographic solution approach is provided to effectively solve the problem at hand. The novelty of this article lies in its examination of the closed loop supply chain network for end-of-life wind turbines, encompassing the social, environmental, and economic dimensions. This study represents the first of its kind to explore these aspects comprehensively. The proposed mathematical model has three objectives which cover the remanufacturing and recycling and aims to minimize CO2 emissions, unemployment, and transportation cost. In order to evaluate the proposed model, Türkiye is utilized as case with real-life data and Gurobi 9.1.2 is utilized. The locations of wind turbines could not be collected individually, and Euclidian distance was used instead of road distance due to a lack of data. These are the main limitations of the proposed study. The study revealed that the TEC and TCE lexicographic approach has the best recycling and remanufacturing cost-to-manufacturing cost ratio, 52.54 %. The least desired result is 74.50 % from CTE.

Economic impact of COVID-19 on patients with type 2 diabetes in Kenya and Tanzania: a costing analysis

IntroductionCOVID-19 affected healthcare access, utilisation and affordability, especially for patients suffering from chronic diseases, including type 2 diabetes (T2D). This study measured the occurrence and magnitude of changes in healthcare...

Morphological characteristics of activated sludge recovered from biological reactors impact on the energy requirement for centrifugal dewatering

The effect of sludge dewatering on handling and transport costs as well as the impact of various parameters like sludge characteristics, the used dewatering equipment and the adopted specific operating conditions, on the efficiency of this step, were considered in the present study. The influence of a laboratory-scale centrifugation for dewatering activated sludge (AS) was also investigated. Additionally, models to describe the relationships between independent variables like centrifugation speed, AS volume and fixed time and dependent variables like the percentage of solid cake (% GS). The used approach was based on the response surface methodology (RSM) along with a central composite design experiment, considering three distinct types of AS: healthy (BS), partially bulking (BF), and deflocculated (BD) sludges. The morphological characteristics of the sludge do have an effect on the operating conditions for the centrifugation, hence the energy consumption for a desired dewatering level. For the case of BS sludge, a centrifugation at 2600 rpm for 10 min, using a 10.3 mL plug, led to a solid cake of 12.65 %, whereas for BD sludge, with a higher centrifugation at 3000 rpm for 17.30 min and a smaller plug volume (8 mL) led to 6.82 %, roughly half of the previous percentage.

Analysis of Regulation of Costs for Operating Buses in a Transport Company

The problem of increasing passenger traffic remains acute for municipal public transport. The value of this indicator is determined by the interest of citizens in this way of making their trips and determines the feasibility of the carrier’s operation. The authors conducted a study of the problems of public transport services in large- and medium-sized cities, which found that the population’s interest in public urban passenger transport has generally been significantly lost. More than 40% of the city population refuses to travel on public transport, half of the population has questions about the reliability of tariff formation, and the same number of people are not satisfied with the regular route network and schedule. City residents increasingly prefer personal vehicles or taxis for their trips, which negatively affects the revenue side of carriers, as well as the level of social comfort and the quality of life of citizens. Efforts to reduce the operating costs of the carrier are aimed at correcting the current situation with urban transport so that tariffs for transportation are more acceptable for passengers. The formation of tariffs for passenger transportation for transport companies is an urgent and complex task. It is necessary to formulate the tariff in such a way as to cover your own transportation costs in the near future and, at the same time, not exceed the psychological threshold for passengers so as not to cause their negative reaction. In addition, since the transportation of passengers by urban public transport is regulated by the authorities, it is also necessary to provide an economic justification for transportation tariffs. This is difficult in the absence of substantiated indicators of consumption rates of material resources in the transport process. To solve this problem, it is necessary to carefully analyze the current costs of operating the bus fleet, as well as forecast costs for future periods. At different periods, researchers have proposed various approaches for planning the cost of operating a bus fleet. The approach we propose is to use standardization of the consumption of material resources, considering the individual operating conditions of the bus fleet and the influence of various factors.

Joint optimization of truck-drone routing for last-mile deliveries in urban areas

This paper presents a joint routing optimization model to satisfy the on-demand customer requirements by minimising the transportation and time penalty costs of trucks and drones, considering the constraints on paths and delivery time of trucks and drones, the drone battery capacity limit, and the customer demands. The improved genetic algorithm is proposed to solve the optimization model followed by the computational experiments demonstrating the superiority of the improved genetic algorithm over the original genetic algorithm in computational efficiency, economy, and punctuality. Further, the comparative analysis demonstrates that the multi-drone joint delivery mode considering the customer demands performs better than the other delivery modes and that the delivery routes can be re-optimised promptly to satisfy the real-time customer demands. The sensitivity analysis on the drone design parameters provides theoretical insights into deploying the size and speed of drone platoons when promoting truck-drone joint delivery in applications.

A two-stage optimization model for relief distribution to disaster survivors under two-fold uncertainty

Disasters are unforeseen occurrences requiring extensive transport deployment to support and relieve victims. Sometimes, this transportation is not feasible directly from some supply points to some destination points. Due to this tragedy, it is unclear precisely what is available at supply points, what is needed at destinations, how much transportation capacity there is, and what the routes are like. In this study, we investigate a two-stage multi-item fixed charge four-dimensional transportation problem using the concept of big data theory under the two-fold uncertainties. Here, the model’s parameters such as unit transportation costs, availabilities of items at the suppliers, fixed charges, capacities of conveyances, and demands of the items at the retailers are considered type-2 zigzag uncertain variables. Using big data theory and based on uncertain programming theory, two novel uncertain models are developed such as chance-constrained programming and expected value programming model. These two uncertain models transformed into the deterministic form via uncertainty inverse distribution theory. A critical value based reduction method with three categories (i.e., expected value, pessimistic value, and optimistic value) is applied to reduce the type-2 zigzag uncertain variable to the type-1 zigzag uncertain variable. The genetic algorithm and particle swarm optimization techniques have been proposed to find the optimal solution for the two deterministic models. The efficiency of our proposed approach is demonstrated with a real-life numerical example.

Understanding Spatial Agglomeration: Increasing Returns, Land, and Transportation Costs

Economic activities are concentrated on a small share of inhabitable land. In our view, this agglomeration is the outcome of a trade-off between increasing returns and transportation costs, which capitalizes into land rents. Our second baseline idea is that Tiebout-like sorting provides a general framework to handle a large array of problems in spatial economics. Cities have high housing prices because they are productive and offer high levels of amenities and public goods. Both production and amenity effects capitalize in the land rent at a particular location. Through the process of bidding for land, spatial sorting is the involuntary consequence of a myriad of individual decisions made by agents who pursue their own interests.

Optimization of sustainable supply chain for bio-based isopropanol production from sugar beet using techno-economic and life cycle analysis

This study examines the techno-economic and life cycle analysis of bio-based isopropanol (IPA) production from sugar beet, utilizing a Geographical Information System (GIS)-enabled framework. By focusing on the innovative IPA production technology, the research demonstrates the economic and environmental feasibility of converting first-generation biomass into sustainable chemicals through the optimization of the Sugar Beet-to-Isopropanol supply chain. Findings highlight a cost-optimal production capacity of 55,800 mt/year with significant potential for reducing emissions and operational costs. The production cost of bio-IPA is potentially 70 % less than the fossil-derived IPA price. Additionally, the potential profits from bio-based IPA are estimated to be nearly double the market price of its primary raw material, sugar, demonstrating the economic feasibility of converting the first-generation biomass for sustainable IPA production. The study also explores the impact of facility clustering on transportation emissions and costs, revealing strategic approaches to expanding plant capacities in response to increasing demand. This research provides insights for designing sustainable industrial practices using first-generation biomass in the chemical industry.

Empirical optimal transport under estimated costs: Distributional limits and statistical applications

Optimal transport (OT) based data analysis is often faced with the issue that the underlying cost function is (partially) unknown. This is addressed in this paper with the derivation of distributional limits for the empirical OT value when the cost function and the measures are estimated from data. For statistical inference purposes, but also from the viewpoint of a stability analysis, understanding the fluctuation of such quantities is paramount. Our results find direct application in the problem of goodness-of-fit testing for group families, in machine learning applications where invariant transport costs arise, in the problem of estimating the distance between mixtures of distributions, and for the analysis of empirical sliced OT quantities.The established distributional limits assume either weak convergence of the cost process in uniform norm or that the cost is determined by an optimization problem of the OT value over a fixed parameter space. For the first setting we rely on careful lower and upper bounds for the OT value in terms of the measures and the cost in conjunction with a Skorokhod representation. The second setting is based on a functional delta method for the OT value process over the parameter space. The proof techniques might be of independent interest.

Revolutionizing RPAS logistics and reducing CO2 emissions with advanced RPAS technology for delivery systems

To manage remotely piloted aircraft system (RPAS) networks effectively, this research presents a multi-objective location-routing optimization model. This model integrates time window constraints, concurrent pick-up and delivery demands, and rechargeable battery functionality, and also introduces a standardized framework to clarify the RPAS CO2 emission model. These integrations significantly decrease battery consumption in Remotely Piloted Aircraft Systems (RPAS) and lower transportation costs, while also optimizing delivery times, reducing operational risks, and minimizing CO2 emissions. The model’s enhancement for optimizing delivery schedules takes into account uncertain traffic conditions, thus improving accuracy in dynamic environments and further contributing to environmental sustainability. Risk assessment employs the Specific Operations Risk Assessment (SORA) standard, adding a third objective function. This combination of the model, further enhance the efficiency and sustainability of RPAS operations, by optimizing delivery schedules, reducing CO2 emissions and battery consumption, and improving accuracy under dynamic conditions. Also, it make RPAS logistics more practical and effective in real-world applications. As result, the NSGA-II algorithm achieves significant reductions across all objectives: 33.3 % in cost, 6.48 % in time, 33.3 % in risk, and 35.7 % in battery usage within 250 generations. The use of the NSGA-II meta-heuristic method for validation enhances the credibility and practicality of the model. The optimization model’s performance over 250 generations shows rapid initial improvements in cost, time, risk, and battery usage, followed by stabilization, indicating efficient convergence and effective evolutionary computation. Also the findings show that with a CO2 emission rate of 3.773 × 104 kg of CO2 per Wh, highlighting the model’s efficiency and effectiveness.

Solving low-carbon last mile delivery problem using discrete marine predators algorithm

With the increasing concentration of greenhouse gases, carbon peaking and carbon neutrality have gradually become a global issue. As the last link of e-commerce logistics, the last mile delivery should not only focus on customer satisfaction and enterprise cost, but also reduce carbon emission and promote green development. In order to solve the last mile delivery problem, this paper builds the last mile delivery model for two common delivery vehicles, considering the impact of transportation cost, carbon emission and customer satisfaction on the last mile delivery path planning. The last mile delivery is an NP-hard problem, a novel Discrete Marine Predators Algorithm(DMPA) is proposed to solve the problem, which combines neighborhood search strategy and RS hybrid operator. Six different test examples are generated based on Solomon for simulation experiments, and the experimental results verify that the proposed algorithm is obviously superior to the marine predators algorithm, simulated annealing algorithm and genetic algorithm. DMPA obtains significantly higher customer satisfaction than other algorithms. The customer satisfaction of C101 and C201 is as high as 0.99, which is close to the optimal value of 1. DMPA can achieve lower transportation costs and less carbon emissions compared with other algorithms. DMPA reduces the transportation cost by at least 61.12$ and the carbon emission by at least 1033.64 kg for C101 by minivan delivery. DMPA reduces the transportation cost by at least 28.89$ and the carbon emission by at least 210.9 kg for C101 by electric tricycle delivery. It can effectively reduce carbon emission, lower transportation cost, improve service level, and promote the integration of the dual carbon target with the internal requirements of national development.

School provision, workforce distribution, housing, and the staffing of schools: The case of Sydney, Australia

Pursuing Sustainable Development Goal 4 has led to more children and youth accessing schooling than at any point in history. However, this expansion of provision has not been without workforce challenges. UNESCO modelling indicates a global shortfall of 44 million teachers by 2030. The challenge of having a sufficiently qualified school education workforce where it is needed is amplified in locations where affordable quality stock of housing is limited. With most of the world’s population urbanising, cities represent a new frontier in understanding the complexity of current and forthcoming teacher shortages, with significant public policy implications. Interventions aimed at individual workers, schools, or administrative boundaries have failed to arrest staff shortages as they are frequently applied too late or based on potential rather than realised data. This paper develops a novel measure, the Workforce Catchment Area (WFCA), and tests its applicability in the Australian city of Sydney. Analysis demonstrates that when integrated with housing and transportation costs it is possible to identify workforce distribution as a contributor to teacher shortages, and generate the data and evidence required by policy makers to set explicit policy goals and markers of success.

A GRASP algorithm for the concrete delivery problem

This paper addresses a novel variant of the Concrete Delivery Problem (CDP), which involves the efficient scheduling of ready-mixed concrete deliveries to construction sites while balancing the conflicting goals of minimizing transportation costs and maximizing customer satisfaction. In this study, we propose an exact formulation and a heuristic approach based on the Greedy Randomized Adaptive Search Procedure (GRASP) to tackle this challenging CDP variant. This variant introduces realistic side constraints, including driver working shifts, a minimum driver working time, and overtime penalties. Additionally, it considers the case where customers may request multiple types of concrete delivered within the same time window. We assess the performance of our heuristic using new instances generated for this problem and provide a comparative analysis with another CDP variant from the literature to demonstrate its effectiveness.

Research on Location Optimization of Logistics Center Based on Center of Gravity Method: A Case Study of Jilin Province

With the rapid development of the global economy, logistics plays an increasingly important role in modern society. As the core node of the logistics system, logistics center is responsible for the distribution, transfer and distribution of goods. The scientific and rational location of the logistics center will directly affect the efficiency and cost of logistics transportation. In this paper, Jilin Province, a key agricultural producing area in China, is selected as the research object. By collecting certain historical data information, regression analysis method and moving average method are used to predict the grain output of each city, and the average value of the predicted values obtained by the two methods is used as the final forecast value. The initial site selection of grain logistics center in Jilin Province is calculated by using the center of gravity, and the new site selection after iteration is obtained by using the center of gravity. Finally, the location of the final grain logistics center is determined by considering the factors such as geographical location, traffic accessibility and usable area around. This study can provide some reference value for the optimization of logistics center location.

Optimisation of Urban Logistics Distribution Routing with Time Window

Reasonable optimization of the path can not only reduce unnecessary logistics cost expenditure; efficient circulation speed can also enhance the economic development of the city. In the process of the transformation of the model, it will be directly affected by the change of the importance of logistics enterprises to logistics distribution work. Based on the background of urban logistics, the optimization process of multi-logistics distribution path with time window is comprehensively studied. The relevant theoretical knowledge involved in the distribution link is reviewed, and through the analysis of the existing problems of urban logistics and the vehicle path optimization problem, the heuristic algorithm is used to establish the path optimization model of urban logistics center with time window, which reduces the vehicle transportation cost, thus reducing the total cost of logistics, and at the same time, improves the efficiency of the internal circulation of urban logistics and accelerates the economic development.