Transmission Electron Microscopy Observations Research Articles

Se (IV)-Doped Monodisperse Spherical TiO <sub>2</sub> Nanoparticles for Adhesively Bonded Joint Reinforcing: Synthesis and Characterization

<div>This study focused on the synthesis and characterization of monodisperse spherical TiO<sub>2</sub> nanoparticles doped on the surface with Se (IV) in order to increase the mechanical properties of the bonded joint reinforcing. Work will begin with the synthesis of monodisperse quasi-spherical TiO<sub>2</sub> nanoparticles with a modal diameter of less than 20 nm, using the sol-gel technique. Se (IV) selenium surface doping changed the specimen’s chemistry and physics. Different initial concentrations of the doping element will be tested. Next, a physicochemical characterization of the different solid systems will be carried out in order to determine the effect of the doping element on the properties of titanium dioxide. Their morphology and size will be studied through transmission electron microscope observations; volume chemical composition by X-ray diffraction analysis, EDX (energy-dispersive X-ray), and XRF (X-ray fluorescence). The careful selection of 4% and 6% concentrations produced the optimum nanoparticle increase and cohesive structure preservation. These findings demonstrate that Se (IV)-doped monodisperse spherical TiO<sub>2</sub> nanoparticles may improve adhesive junction mechanical properties, enabling the development of better adhesive formulations.</div>

Staggered structural dynamic-mediated selective adsorption of H2O/D2O on flexible graphene oxide nanosheets

Graphene oxide (GO) is the one of the most promising family of materials as atomically thin membranes for water-related molecular separation technologies due to its amphipathic nature and layered structure. Here, we show important aspects of GO on water adsorption from molecular dynamics (MD) simulations, in-situ X-ray diffraction (XRD) measurements, and ex-situ nuclear magnetic resonance (NMR) measurements. Although the MD simulations for GO and the reduced GO models revealed that the flexibility of the interlayer spacing could be attributed to the oxygen-functional groups of GO, the ultra-large GO model cannot well explain the observed swelling of GO from XRD experiments. Our MD simulations propose a realistic GO interlayer structure constructed by staggered stacking of flexible GO sheets, which can explain very well the swelling nature upon water adsorption. The transmission electron microscopic (TEM) observation also supports the non-regular staggered stacking structure of GO. Furthermore, we demonstrate the existence of the two distinct types of adsorbed water molecules in the staggered stacking: water bonded with hydrophilic functional groups and “free” mobile water. Finally, we show that the staggered stacking of GO plays a crucial role in H/D isotopic recognition in water adsorption, as well as the high mobility of water molecules.

Systematic study of FIB-induced damage for the high-quality TEM sample preparation

Nowadays, a focused Ga ion beam (FIB) with a scanning electron microscopy (SEM) system has been widely used to prepare the thin-foil sample for transmission electron microscopy (TEM) or scanning TEM (STEM) observation. An establishment of a solid strategy for a reproducible high-quality sample preparation process is essential to carry out high-quality (S)TEM analysis. In this work, the FIB damages introduced by Ga+ beam were investigated both experimentally and stopping and range of ions in matter (SRIM) simulation for silicon (Si), gallium nitride (GaN), indium phosphide (InP), and gallium arsenide (GaAs) semiconductors. It has been revealed that experimental investigations of the FIB-induced damage are in good agreement with SRIM simulation by defining the damage as not only “amorphization” but also “crystal distortion”. The systematic evaluation of FIB damages shown in this paper should be indispensable guidance for reliable (S)TEM sample preparation.

Enhancement of superconductivity and phase diagram of Ta-doped Kagome superconductor CsV3Sb5

Kagome superconductors AV3Sb5 (A = K, Rb, and Cs) have attracted enormous interest due to the coexistence of charge density wave (CDW) order, unconventional superconductivity (SC) and anomalous Hall effect (AHE). In this paper, we reported an intensive investigation on Cs(V1−xTax)3Sb5 single crystals with systematic Ta doping. Ta was confirmed to be doped into V-site in the Kagome layer from both single crystal X-ray diffraction structural refinement and scanning transmission electron microscopy observation. The highest Ta doping level was found to be about 16%, which is more than twice as much as 7% in Nb-doped CsV3Sb5. With the increase of Ta doping, CDW order was gradually suppressed and finally vanished when the doping level reached to more than 8%. Meanwhile, superconductivity was enhanced with a maximum critical temperature (Tc) of 5.3 K, which is the highest Tc in the bulk crystal of this Kagome system at ambient pressure so far. The μ0Hc2(T) behavior demonstrates that the system is still a two-band superconductor after Ta doping. Based on the electrical transport measurement, a phase diagram was set up to exhibit the evolution of CDW and SC in the Cs(V1−xTax)3Sb5 system. These findings pave a new way to search for new superconductors with higher Tc in the AV3Sb5 family and establish a new platform for tuning and controlling the multiple orders and superconducting states.

Resolving the long-standing discrepancy in Fe3Al ordering mobilities: A synergistic experimental and phase-field study

This study addressed the long-standing challenge of determining the growth kinetic of Antiphase Domains (APDs) with D03-ordered structure in Fe3Al by the combination of phase-field (PF) simulations and transmission electron microscopy (TEM) observation. The “shape coefficient” which correlates the growth rate of APD with 3-dimensional intricate shape and the shrinking rate of 2-dimensional circular antiphase boundaries (APBs) in thin film was assessed through a comparative analysis of PF simulations involving the shrinking of 2D circular APBs and the growth of 3D APDs emerged from a disordered state. Simultaneously, the increase rate in APD size in bulk samples after heat treatment was measured using TEM. By incorporating the calculated shape coefficient and experimental data on APD growth rates, we successfully derived accurate values of mobility for forming D03 type ordered structure. The ordering mobilities evaluated by this approach align more closely with those obtained through traditional X-ray powder diffraction of order-order relaxation rather than those obtained through in-situ TEM observation. This finding lays the foundation for optimizing heat treatment conditions to regulate APD structure and enhance the superelasticity of Fe3Al primarily due to the interaction between dislocation and APBs. This methodology can be extended to estimate the ordering mobility of other intermetallic.

Cyclic Failure of a Cr–Au Bilayer on Polyimide: In Situ Transmission Electron Microscopy Observations of Interfacial Dislocation Mechanisms

This work presents in situ transmission electron microscopy observations of dislocation activities and associated fatigue properties in a cross‐sectional sample of a Cr–Au bilayer on a polyimide substrate under cyclic loading. Dislocation structures in the Au layer are observed to evolve into a geometrically necessary boundary parallel to the Cr–Au interface, which significantly impedes dislocation motion and plays a crucial role in enhancing the fatigue resistance of the studied sample. While a comparison to the damage in a conventional blanket film testing geometry reveals some differences in the accumulation of plastic flow, the findings can provide insights into the underlying mechanisms governing fatigue in nanostructured multilayer materials on polymer substrates.

Replicating human characteristics: A promising animal model of central fatigue

Central fatigue is a common pathological state characterized by psychological loss of drive, lack of appetite, drowsiness, and decreased psychic alertness. The mechanism underlying central fatigue is still unclear, and there is no widely accepted successful animal model that fully represents human characteristics. We aimed to construct a more clinically relevant and comprehensive animal model of central fatigue. In this study, we utilized the Modified Multiple Platform Method (MMPM) combined with alternate-day fasting (ADF) to create the animal model. The model group rats are placed on a stationary water environment platform for sleep deprivation at a fixed time each day, and they were subjected to ADF treatment. On non-fasting days, the rats were allowed unrestricted access to food. This process was sustained over a period of 21 days. We evaluated the model using behavioral assessments such as open field test, elevated plus maze test, tail suspension test, Morris water maze test, grip strength test, and forced swimming test, as well as serum biochemical laboratory indices. Additionally, we conducted pathological observations of the hippocampus and quadriceps muscle tissues, transmission electron microscope observation of mitochondrial ultrastructure, and assessment of mitochondrial energy metabolism and oxidative stress-related markers. The results revealed that the model rats displayed emotional anomalies resembling symptoms of depression and anxiety, decreased exploratory behavior, decline in learning and memory function, and signs of skeletal muscle fatigue, successfully replicating human features of negative emotions, cognitive decline, and physical fatigue. Pathological damage and mitochondrial ultrastructural alterations were observed in the hippocampus and quadriceps muscle tissues, accompanied by abnormal mitochondrial energy metabolism and oxidative stress in the form of decreased ATP and increased ROS levels. In conclusion, our ADF+MMPM model comprehensively replicated the features of human central fatigue and is a promising platform for preclinical research. Furthermore, the pivotal role of mitochondrial energy metabolism and oxidative stress damage in the occurrence of central fatigue in the hippocampus and skeletal muscle tissues was corroborated.

Mitochondrial damage and activation of NLRP3 induced by Yersinia ruckeri infection play an important role in the occurrence of diffuse acute inflammation of channel catfish (Ictalurus punctatus)

Yersinia ruckeri, as a facultative intracellular pathogen, can cause two different infection phenotypes of fish. An important phenotype is diffuse acute inflammation (DAI), which is mainly characterized by systemic hemorrhage and multiple tissues damage. Another phenotype is enteric redmouth symptom (EM) with predominantly digestive system damage, while slight damage to other tissues and organs. At present, the causes and mechanisms of heterogeneity of Y. ruckeri infection are not clear. According to our previous research and related bioinformatics analysis, it is suggested that the heterogeneity of infection of Y. ruckeri may be related to the activation of intracellular pattern recognition receptor (NLRP3). Furthermore, combined with the transmission electron microscope observation and ultrastructural pathological analysis of DAI and EM phenotypes, it is hypothesized that Y. ruckeri infection may mediate the occurrence of DAI by inducing mitochondrial damage and activation of NLRP3. In this study, we established DAI and EM phenotypes of channel catfish (Ictalurus punctatus) through the artificial infection experiment. Subsequently, we observed the pathological changes and characteristics of different tissues in DAI and EM phenotypes, such as liver, spleen, kidney, intestine and gill. In addition, the mitochondrial damage of head kidney mediated by Y. ruckeri infection was confirmed by transmission electron microscope observation. Furthermore, by detecting the expression of proinflammatory factors and related pattern recognition receptors in various tissues, we preliminarily clarified the molecular characteristics of immune response in DAI and EM phenotype fish. Moreover, the head kidney macrophages isolated from DAI and EM were observed through transmission electron microscope, and the expression levels of NLRP3, Caspase-1 and IL-1β were detected. Finally, the correlation between mitochondrial damage induced by Y. ruckeri infection and NLRP3 signal transduction was preliminary revealed. Taken together, our results showed that the inflammatory DAI phenotype of fish mediated by Y. ruckeri infection is closely related to mitochondrial damage and NLRP3 activation, which will provide theoretical basis for further study on the pathogenic mechanism of Y. ruckeri infection and clinical diagnosis of the disease, and also provide some insights into the role of NLRP3 in the natural immunity of aquatic animals.

Investigation of Nondestructive and Noncontact Electrical Characterization of GaN Thin Film on ScAlMgO4 Substrate Using Terahertz Time‐Domain Spectroscopic Ellipsometry with Characteristic Impedance Analytical Model

Semiconductor evaluation methods frequently require sample processing and carry the risk of defects and property changes. Therefore, nondestructive and noncontact electrical property measurement techniques are necessary. Terahertz time‐domain spectroscopic ellipsometry (THz‐TDSE) can simultaneously estimate the electrical properties and film thickness of a sample. However, whether this method can simultaneously determine electrical properties and film thickness for semiconductor thin films of 1 μm or less remains unclear. This study uses THz‐TDSE to evaluate the electrical properties and film thickness of a GaN thin film (≈0.8 μm thick) on a ScAlMgO4 substrate. Using the conventional analysis based on Fresnel's formula (FR model), which is used in the field of optics, uniquely determining the electrical properties and film thickness is not possible owing to multiple optimal solutions. Therefore, a model combining the characteristic impedance model used in the radio‐wave region with the FR model is employed in the analysis. The obtained values of electrical properties of the GaN thin film evaluated using THz‐TDSE are consistent with those using Hall effect measurement. Moreover, the film thickness is consistent with that measured from the cross‐sectional transmission electron microscopy observation.

Engineering a nanoantibiotic system displaying dual mechanism of action

In recent decades, peptide amphiphiles (PAs) have established themselves as promising self-assembling bioinspired materials in a wide range of medical fields. Herein, we report a dual-therapeutic system constituted by an antimicrobial PA and a cylindrical protease inhibitor (LJC) to achieve broad antimicrobial spectrum and to enhance therapeutic efficacy. We studied two strategies: PA-LJC nanostructures (Encapsulation) and PA nanostructures + free LJC (Combination). Computational modeling using a molecular theory for amphiphile self-assembly captures and explains the morphology of PA-LJC nanostructures and the location of encapsulated LJC in agreement with transmission electron microscopy and two-dimensional (2D) NMR observations. The morphology and release profile of PA-LJC assemblies are strongly correlated to the PA:LJC ratio: high LJC loading induces an initial burst release. We then evaluated the antimicrobial activity of our nanosystems toward gram-positive and gram-negative bacteria. We found that the Combination broadens the spectrum of LJC, reduces the therapeutic concentrations of both agents, and is not impacted by the inoculum effect. Further, the Encapsulation provides additional benefits including bypassing water solubility limitations of LJC and modulating the release of this molecule. The different properties of PA-LJC nanostructures results in different killing profiles, and reduced cytotoxicity and hemolytic activity. Meanwhile, details in membrane alterations caused by each strategy were revealed by various microscopy and fluorescent techniques. Last, in vivo studies in larvae treated by the Encapsulation strategy showed better antimicrobial efficacy than polymyxin B. Collectively, this study established a multifunctional platform using a versatile PA to act as an antibiotic, membrane-penetrating assistant, and slow-release delivery vehicle.

Optimizing myocardial cell protection with xanthine derivative KMUP-3 potentiates autophagy through the PI3K/Akt/eNOS axis.

Autophagy can have either beneficial or detrimental effects on various heart diseases. Pharmacological interventions improve cardiac function, which is correlated with enhanced autophagy. To assess whether a xanthine derivative (KMUP-3) treatment coincides with enhanced autophagy while also providing cardio-protection, we investigated the hypothesis that KMUP-3 treatment activation of autophagy through PI3K/Akt/eNOS signalling offered cardioprotective properties. The pro-autophagic effect of KMUP-3 was performed in a neonatal rat model targeting cardiac fibroblasts and cardiomyocytes, and by assessing the impact of KMUP-3 treatment on cardiotoxicity, we used antimycin A-induced cardiomyocytes. As determined by transmission electron microscopy observation, KMUP-3 enhanced autophagosome formation in cardiac fibroblasts. Furthermore, KMUP-3 significantly increased the expressions of autophagy-related proteins, LC3 and Beclin-1, both in a time- and dose-dependent manner; moreover, the pro-autophagy and nitric oxide enhancement effects of KMUP-3 were abolished by inhibitors targeting eNOS and PI3K in cardiac fibroblasts and cardiomyocytes. Notably, KMUP-3 ameliorated cytotoxic effects induced by antimycin A, demonstrating its protective autophagic response. These findings enable the core pathway of PI3K/Akt/eNOS axis in KMUP-3-enhanced autophagy activation and suggest its principal role in safeguarding against cardiotoxicity.

Thermal Stability and Crystallization Processes of Pd78Au4Si18 Thin Films Visualized via In Situ TEM.

Amorphous alloys or metallic glasses (MGs) thin films have attracted extensive attention in various fields due to their unique functional properties. Here, we use in situ heating transmission electron microscopy (TEM) to investigate the thermal stability and crystallization behavior of Pd-Au-Si thin films prepared by a pulsed laser deposition (PLD) method. Upon heating treatment inside a TEM, we trace the structural changes in the Pd-Au-Si thin films through directly recording high-resolution images and diffraction patterns at different temperatures. TEM observations reveal that the Pd-Au-Si thin films started to nucleate with small crystalline embryos uniformly distributed in the glassy matrix upon approaching the glass transition temperature Tg=625K, and subsequently, the growth of crystalline nuclei into sub-10 nm Pd-Si nanocrystals commenced. Upon further increasing the temperature to 673K, the thin films transformed to micro-sized patches of stacking-faulty lamellae that further crystallized into Pd9Si2 and Pd3Si intermetallic compounds. Interestingly, with prolonged thermal heating at elevated temperatures, the Pd9Si2 transformed to Pd3Si. Simultaneously, the solute Au atoms initially dissolved in glassy alloys and eventually precipitated out of the Pd9Si2 and Pd3Si intermetallics, forming nearly spherical Au nanocrystals. Our TEM results reveal the unique thermal stability and crystallization processes of the PLD-prepared Pd-Au-Si thin films as well as demonstrate a possibility of producing a large quantity of pure nanocrystals out of amorphous solids for various applications.

The Influence of Precipitated Particles on the Grain Size in Cold-Rolled Al-Mn Alloy Foils upon Annealing at 100-550 °C.

The Al-Mn alloy heat exchanger fin production process includes a brazing treatment at s high temperature of 600 °C, in which coarse grains are preferred for their high resistance to deformation at elevated temperatures by decreasing the grain boundary sliding. In this study, Al-1.57Mn-1.57Zn-0.58Si-0.17Fe alloy foils cold rolled by 81.7% (1.1 mm in thickness) and 96.5% (0.21 mm in thickness) were annealed at 100-550 °C for 1 h to investigate their recrystallization behavior, grain sizes, and precipitates by increasing the annealing temperature, using micro-hardness measurement, electron back-scattered diffraction (EBSD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) techniques. The micro-hardness results showed that the recrystallization finishing temperatures for the two samples were almost the same, 323 ± 2 °C. The EBSD results showed that when the annealing temperature decreased from 550 to 400 °C, the recrystallized grain sizes of the two samples were nearly identical-both increased slightly. Further decreasing the annealing temperature from 400 to 330 °C caused the grain sizes to increase more, with the thinner foil sample having a more significant increase. The SEM and TEM observations showed that the micron-sized primary-phase remained unchanged during the annealing process. The nano-sized secondary phase precipitates formed during the hot-rolling process experienced a coarsening and dissolving process upon annealing. The particle size of the secondary phase increased from 32 nm to 44 nm and the area fraction decreased from 4.2% to 3.8%. The nucleation analysis confirmed that the large primary-phase could act as a nucleation site through particle stimulated nucleation (PSN) mode. The relatively dense secondary phase precipitates with small sizes at lower temperatures could provide higher Zener drag to the grain boundaries, leading to fewer nuclei and thereafter coarser grains. The coarsening of the recrystallized grains in the foils could be implemented through thickness reduction and/or precipitation processes to form densely distributed nano-sized precipitates.

Aptly chosen, effectively emphasizing the action and mechanism of antimycin A1.

Rhizoctonia solani Kühn, a plant pathogenic fungus that can cause diseases in multiple plant species is considered one of the common and destructive pathogens in many crops. This study investigated the action of antimycin A1, which was isolated from Streptomyces AHF-20 found in the rhizosphere soil of an ancient banyan tree, on Rhizoctonia solani and its mechanism. The inhibitory effect of antimycin A1 on R. solani was assessed using the comparative growth rate method. The results revealed that antimycin A1 exhibited a 92.55% inhibition rate against R. solani at a concentration of 26.66 μg/mL, with an EC50 value of 1.25 μg/mL. To observe the impact of antimycin A1 on mycelial morphology and ultrastructure, the fungal mycelium was treated with 6.66 μg/mL antimycin A1, and scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were employed. SEM analysis demonstrated that antimycin A1 caused mycelial morphology to become stripped, rough, and folded. The mycelium experienced severe distortion and breakage, with incomplete or locally enlarged ends, shortened branches, and reduced numbers. TEM observation revealed thickened cell walls, indistinct organelle boundaries, swollen mitochondria, exosmotic substances in vesicles, slow vesicle fusion, and cavitation. Real-time quantitative PCR and enzyme activity assays were conducted to further investigate the impact of antimycin A1 on mitochondria. The physiological and biochemical results indicated that antimycin A1 inhibited complexes III and IV of the mitochondrial electron transport chain. RT-PCR analysis demonstrated that antimycin A1 controlled the synthesis of relevant enzymes by suppressing the transcription levels of ATP6, ATP8, COX3, QCR6, CytB, ND1, and ND3 genes in mitochondria. Additionally, a metabolomic analysis revealed that antimycin A1 significantly impacted 12 metabolic pathways. These pathways likely experienced alterations in their metabolite profiles due to the inhibitory effects of antimycin A1. Consequently, the findings of this research contribute to the potential development of novel fungicides.

Transcriptional and ultrastructural changes of macrophages after african swine fever virus infection

African swine fever (ASF) is a highly impactful infectious disease in the swine industry, leading to substantial economic losses globally. The causative agent, African swine fever virus (ASFV), possesses intricate pathogenesis, warranting further exploration. In this study, we investigated the impact of ASFV infection on host gene transcription and organelle changes through macrophage transcriptome sequencing and ultrastructural transmission electron microscopy observation. According to the results of the transcriptome sequencing, ASFV infection led to significant alterations in the gene expression pattern of porcine bone marrow derived macrophages (BMDMs), with 2404 genes showing upregulation and 1579 genes downregulation. Cytokines, and chemokines were significant changes in the expression of BMDMs; there was significant activation of pattern recognition receptors such as Toll-like receptors and Nod-like receptors. According to the observation of the ultrastructure, mitochondrial damage and mitochondrial autophagy were widely present in ASFV-infected cells. The reduced number of macrophage pseudopodia suggested that virus-induced structural changes may compromise pathogen recognition, phagocytosis, and signal communication in macrophages. Additionally, the decreased size and inhibited acidification of secondary lysosomes in macrophages implied suppressed phagocytosis. Overall, ASFV infection resulted in significant changes in the expression of cytokines and chemokines, accompanied by the activation of NLR and TLR signaling pathways. We reported for the first time that ASFV infection led to a reduction in pseudopodia numbers and a decrease in the size and acidification of secondary lysosomes.

Extraction of Nano Hydroxyapatite from Eggshell and Characterization for Biomedical Applications

Because of the exceptional qualities, nano-hydroxyapatites, or n-HA, are excellent materials for diverse applications. It is simple and convenient to synthesize from various natural ingredients. The synthesis of n-HA from eggshells, a typical domestic waste product in the neighborhood, was the primary goal of this study project. This synthesis of n-HA was performed using ammonia and orthophosphoric acid as chemical reagents. The synthesized n-HA have been characterized by UV (Ultraviolet), FTIR (Fourier Transformed Infrared Spectroscopy), SEM (Scanning Electron Microscopy), TEM (Transmission Electron Microscopy), and XRD (X-ray diffraction) analysis. The peak formed by the UV analysis verified the successful formation of n-HA in the solution. The bandgap has been determined through additional research on the UV data. The SEM and TEM images show the size and form of the synthesized n-HA. Based on TEM observations, the synthesized n-HA has a size in the range of 10 to 40 nm. The peak ensures the n-HA’s crystallinity that the XRD analysis produced. The obtained crystallinity was 74%.

Isolation and characteristic of Bacillus cereus phage Z3 and its application in rice and milk

Bacillus cereus is a foodborne pathogen that widely exists in various food products. In this study, a new B. cereus phage, named Z3, was isolated from the soil and characterized. Transmission electron microscopy (TEM) observations revealed that Z3 had an icosahedral head and a retractable tail, belonging to myxovirus. The double-stranded linear DNA of Z3 was 159,116 bp in length with a CG% content of 39.96%. Genomic analysis indicated that Z3 represented a new species belonging to the Caeruleovirus genus. Z3 showed broad lytic spectrum, as it could lyse 10 out of 13 tested strains of B. cereus. The in vitro phage killing assay and the one-step growth curve showed that Z3 could effectively inhibit the bacteria growth within 10 h and it had a short latent period and fast multiplication speed. Besides, stability tests showed that Z3 was tolerant to a wide range of temperature (4 °C–55 °C) and pH levels (4–10), and was UV-resistant for 100 min. Furthermore, the applications of Z3 in rice and milk demonstrated its effective antimicrobial properties against B. cereus in food matrix. These findings suggested that Z3 may be a promising biocontrol agent against B. cereus in food industry.

Real-Time TEM Observation of the Role of Defects on Nickel Silicide Propagation in Silicon Nanowires.

Metal silicides have received significant attention due to their high process compatibility, low resistivity, and structural stability. In nanowire (NW) form, they have been widely prepared using metal diffusion into preformed Si NWs, enabling compositionally controlled high-quality metal silicide nanostructures. However, unlocking the full potential of metal silicide NWs for next-generation nanodevices requires an increased level of mechanistic understanding of this diffusion-driven transformation. Herein, using in situ transmission electron microscopy (TEM), we investigated the defect-controlled silicide formation dynamics in one-dimensional NWs. A solution-based synthetic route was developed to form Si NWs anchored to Ni NW stems as an optimal platform for in situ TEM studies of metal silicide formation. Multiple in situ annealing experiments led to Ni diffusion from the Ni NW stem into the Si NW, forming a nickel silicide. We observed the dynamics of Ni propagation in straight and kinked Si NWs, with some regions of the NWs acting as Ni sinks. In NWs with high defect distribution, we obtained direct evidence of nonuniform Ni diffusion and silicide retardation. The findings of this study provide insights into metal diffusion and silicide formation in complex NW structures, which are crucial from fundamental and application perspectives.

Double Z-scheme Ag2CrO4/Bi2O3–KBi6O9Br nanophotocatalysts designed via microwave-assisted combustion-precipitation method for degrading toxic organic dyes

This study introduces novel double Z-scheme Ag2CrO4/Bi2O3–KBi6O9Br nanophotocatalysts for effectively degrading organic dyes, namely Crystal Violet, Acid Orange 7, Rhodamine B, and Eosin Y, from contaminated wastewater. The photocatalysts were thoroughly characterized using advanced techniques, including X-ray Diffraction (XRD), Field Emission Scanning Electron Microscopy (FESEM), Transmission Electron Microscopy (TEM), Energy Dispersive X-ray Spectroscopy (EDX-Dot Mapping), Brunauer-Emmett-Teller (BET), Barrett-Joyner-Halenda (BJH), Diffuse Reflectance Spectroscopy (DRS), and Photoluminescence (PL). XRD confirmed the formation of desired crystalline phases without impurities. FESEM and TEM observations revealed the unique morphology of Bi2O3–KBi6O9Br, with distributed Ag2CrO4 nanoparticles on the surface, as confirmed by EDX-dot mapping. BET-BJH analyses indicated a specific surface area of 7.33 m2/g, including meso and macro pores with an average diameter of 10 nm and a total pore volume of 0.018 cm3/g for Ag2CrO4(25%)/Bi2O3–KBi6O9Br sample. DRS revealed notable shifts in absorption edges, suggesting the formation of a heterojunction, and PL analysis indicated a reduced charge carrier recombination rate, further enhancing the photocatalyst's efficacy. In a series of photocatalytic experiments lasting 240 min, using 1 g/L of Ag2CrO4(25%)/Bi2O3–KBi6O9Br, remarkable degradation efficiencies of 95.1%, 94.2%, 98.0%, and 89.6% were achieved for Crystal Violet, Acid Orange 7, Rhodamine B, and Eosin Y, respectively, at an initial concentration of 10 mg/L. The nanophotocatalyst also showed favourable stability after five consecutive reuses. Overall, the double Z-scheme heterostructure in the composite significantly improved the sample's properties and photocatalytic performance, making it highly effective in removing various organic dyes from wastewater.

Protective Effects of Hesperetin on Cardiomyocyte Integrity and Cytoskeletal Stability in a Murine Model of Epirubicin-Induced Cardiotoxicity: A Histopathological Study

Anthracyclines, including epirubicin (Epi), are effective chemotherapeutics but are known for their cardiotoxic side effects, primarily inducing cardiomyocyte apoptosis. This study investigates the protective role of hesperetin (HSP) against cardiomyopathy triggered by Epi in a murine model. Male CD1 mice were divided into four groups, with the Epi group receiving a cumulative dose of 12 mg/kg intraperitoneally, reflecting a clinically relevant dosage. The co-treatment group received 100 mg/kg of HSP daily for 13 days. After the treatment period, mice were euthanized, and heart tissues were collected for histopathological, immunofluorescence/immunohistochemistry, and transmission electron microscopy (TEM) analyses. Histologically, Epi treatment led to cytoplasmic vacuolization, myofibril loss, and fiber disarray, while co-treatment with HSP preserved cardiac structure. Immunofluorescent analysis of Bcl-2 family proteins revealed Epi-induced upregulation of the pro-apoptotic protein Bax and a decrease in anti-apoptotic Bcl-2, which HSP treatment reversed. TEM observations confirmed the preservation of mitochondrial ultrastructure with HSP treatment. Moreover, in situ detection of DNA fragmentation highlighted a decrease in apoptotic nuclei with HSP treatment. In conclusion, HSP demonstrates a protective effect against Epi-induced cardiac injury and apoptosis, suggesting its potential as an adjunctive therapy in anthracycline-induced cardiomyopathy. Further studies, including chronic cardiotoxicity models and clinical trials, are warranted to optimize its therapeutic application in Epi-related cardiac dysfunction.