Transmission Electron Microscopy Observations Research Articles

In-situ heating-and-electron tomography for materials research: from 3D (in-situ 2D) to 4D (in-situ 3D).

In-situ observation has expanded the application of transmission electron microscopy (TEM) and has made a significant contribution to materials research and development for energy, biomedical, quantum, etc. Recent technological developments related to in-situ TEM have empowered the incorporation of three-dimensional observation, which was previously considered incompatible. In this review article, we take up heating as the most commonly used external stimulus for in-situ TEM observation and overview recent in-situ TEM studies. Then, we focus on the electron tomography (ET) and in-situ heating combined observation by introducing the authors' recent research as an example. Assuming that in-situ heating observation is expanded from two dimensions to three dimensions using a conventional TEM apparatus and a commercially available in-situ heating specimen holder, the following in-situ heating-and-ET observation procedure is proposed: (i) use a rapid heating-and-cooling function of a micro-electro-mechanical system holder; (ii) heat and cool the specimen intermittently and (iii) acquire a tilt-series dataset when the specimen heating is stopped. This procedure is not too technically challenging and can have a wide range of applications. Essential technical points for a successful 4D (space and time) observation will be discussed through reviewing the authors' example application.

Microstructure Study on Very High Cycle Fatigue of an Additively Manufactured Aluminium Alloy via Advanced Characterization Methods

The engineering application of additively manufactured (AM) metallic materials is quite limited by their fatigue behaviors, which are very inconsistent with that of conventionally wrought or cast ones. Here, based on advanced material characterization techniques, such as focused ion beam (FIB), scanning electron microscopy (SEM), and transmission electron microscopy (TEM), the microstructures underneath fracture surfaces were thoroughly investigated in an AM aluminum (AlSi10Mg) alloy with horizontal and vertical building orientation enduring very high cycle fatigue (VHCF) loading under the stress ratios R = −1, 0, and 0.5. Two VHCF failure specimens A and B were representatively selected to further examine SEM and TEM sample preparation via FIB milling. Specimen A was horizontally printed and failed at R = −1; specimen B was vertically printed and failed at R = 0. TEM samples A1 and B1 were lifted from locations near the crack initiation sites on the fracture surfaces of specimens A and B; The locations of TEM samples A2 and B2 kept away from the crack origin sites but still within the “fish-eye” region of crack steady growth. TEM observations show that there was no characteristic microstructure induced by VHCF in different oriented specimens and under various R values.

Revealing the Intrinsic Restructuring of Bi2O3 Nanoparticles into Bi Nanosheets during Electrochemical CO2 Reduction.

Bismuth is a catalyst material that selectively produces formate during the electrochemical reduction of CO2. While different synthesis strategies have been employed to create electrocatalysts with better performance, the restructuring of bismuth precatalysts during the reaction has also been previously reported. The mechanism behind the change has, however, remained unclear. Here, we show that Bi2O3 nanoparticles supported on Vulcan carbon intrinsically transform into stellated nanosheet aggregates upon exposure to an electrolyte. Liquid cell transmission electron microscopy observations first revealed the gradual restructuring of the nanoparticles into nanosheets in the presence of 0.1 M KHCO3 without an applied potential. Our experiments also associated the restructuring with solubility of bismuth in the electrolyte. While the consequent agglomerates were stable under moderate negative potentials (-0.3 VRHE), they dissolved over time at larger negative potentials (-0.4 and -0.5 VRHE). Operando Raman spectra collected during the reaction showed that under an applied potential, the oxide particles reduced to metallic bismuth, thereby confirming the metal as the working phase for producing formate. These results inform us about the working morphology of these electrocatalysts and their formation and degradation mechanisms.

Icariin, astragaloside a and puerarin mixture attenuates cognitive impairment in APP/PS1 mice via inhibition of ferroptosis-lipid peroxidation

Alzheimer's disease (AD) is a neurodegenerative disease that seriously threatens the quality of life of the elderly. Its pathogenesis has not yet been fully elucidated. Ferroptosis, a cell death caused by excessive accumulation of iron-dependent lipid peroxides, has been implicated in the pathogenesis of AD. Uncontrolled lipid peroxidation is the core process of ferroptosis, and inhibiting lipid peroxidation of ferroptosis may be an important therapeutic target for AD. Based on previous studies, we mixed standards of icariin, astragaloside IV, and puerarin, named the standard mixture YHG, and investigated the effect of YHG on ferroptosis -lipid peroxidation in APP/PS1 mice. DFX, a ferroptosis inhibitor, was used as a control drug. In this study, APP/PS1 mice were used as an AD animal model, and behavioral experiments, iron level detection, Transmission electron microscopy (TEM) observation, lipid peroxidation level detection, antioxidant capacity detection, immunofluorescence, Western blot and real-time qPCR were performed. It was found that YHG could reduce body weight, significantly improve abnormal behaviors and the ultrastructure of hippocampal neurons in APP/PS1 mice. The results of biochemical tests showed that YHG reduced the contents of iron, malondialdehyde (MDA) and lipid peroxide (LPO) in brain tissue and serum, and increased the levels of superoxide dismutase (SOD) and reduced glutathione (GSH). Immunofluorescence, WesternBlot and real-time qPCR results showed that YHG could promote the expression of solute carrier family 7 member 11 (SLC7A11), solute carrier family 3 member 2 (SLC3A2) and glutathione peroxidase 4(GPX4). Inhibited the expression of long-chain acyllipid coenzyme a synthetase 4(ACSL4) and lysophosphatidyltransferase 3 (LPCAT3). This study suggests that the mechanism by which YHG improves cognitive dysfunction in APP/PS1 mice may be related to the inhibition of ferroptosis-lipid peroxidation.

Understanding the corrosion protection effect by surface oxide film to underlying Sn solder substrate under thermal exposure condition

Oxide film formed on Sn-based lead-free solder surface plays an important role in protecting the solder joints in electronic devices. However, corrosion resistance of oxide film varied significantly under the effect of waste heat generated by electronic devices. In this work, the physicochemical properties of oxide film on pure Sn and SnAg solders were disclosed through analysing the corresponding electrochemical impedance spectroscopy (EIS) data using measurement and power-law models. The resolved data from EIS were fully corresponded to X-ray photoelectron spectroscopy and transmission electron microscope observations, which highlight the EIS approaches in illustrating the oxide film properties on Sn-based solder.

Caseinophosphopeptides Overcome Calcium Phytate Inhibition on Zinc Bioavailability by Retaining Zinc from Coprecipitation as Zinc/Calcium Phytate Nanocomplexes.

Caseinophosphopeptides have shown great potential to increase zinc bioavailability from phytate-rich diets, but the mechanism of action remains unclear. Here, caseinophosphopeptides from a sodium caseinate hydrolysate dose-dependently retained zinc in solution against calcium phytate coprecipitation under physiologically relevant conditions. The 3 kDa ultrafiltration separation unveiled no added low-molecular-weight chelates of zinc and calcium by caseinophosphopeptides. Tyndall effect, dynamic light scattering measurements, transmission electron microscopy observation, electron diffraction pattern, X-ray diffraction spectrum, and energy-dispersive X-ray analysis demonstrated the caseinophosphopeptides-mediated formation of single-crystal zinc/calcium phytate nanocomplexes (Zn/CaPA-NCs) with a size and ζ-potential of 10-30 nm and -25 mV, respectively. Caseinophosphopeptides-stabilized Zn/CaPA-NCs were found to deliver bioavailable nanoparticulate zinc in mouse jejunal loop ex vivo model and polarized Caco-2 cells, and the treatments with specific inhibitors revealed that intestinal zinc absorption from Zn/CaPA-NCs invoked macropinocytosis, lysosomal release into the cytosol, and transcytosis. Overall, our study proposes a new paradigm for the benefit of caseinophosphopeptides for zinc bioaccessibility and bioavailability in phytate-rich diets.

Screening and bioinformatics analysis of a potential ceRNA network in melatonin-induced cashmere growth in Liaoning cashmere goats

Abstract. The purpose of this study was to investigate the effect of melatonin (MT) on the expression patterns of lncRNA, mRNA and miRNA in Liaoning cashmere goat (LCG) skin fibroblasts. A quantity of 200 ng L−1 MT (MT group) stimulated LCG skin fibroblasts for 48 h, and RNA sequencing was conducted with the control group (Con group) (n=3). The ceRNA network was constructed by bioinformatics analysis of the sequencing data and transmission electron microscopy observation of coated pits and endocytic vesicles. In this study, the results indicated that MT treatment significantly facilitated the proliferation of LCG skin fibroblasts and increased the number of coated pits and vesicles. A total of 775 mRNAs, 57 lncRNAs and 10 miRNAs had differential expression, as indicated by RNA sequencing of skin fibroblasts administrated on the MT group and Con group. The regulatory network of ceRNA was studied, and the results suggested that inositol phosphate metabolism, the cGMP–PKG signaling pathway, endocytosis and other pathways played a certain role in the growth and development of the LCG cashmere. Moreover, the key genes (e.g., CREB1, PIK3C3, AGAP3, MEF2A, ASAP2, IRAG1, PNISR, PIP5K1A, SRSF11, ZRANB2, RBM39 and CBL) were regulated by chi-miR-34c-5p, chi-miR-34c-3p and chi-miR-195-5p. The above mRNAs were competitively bound by 15 lncRNAs (e.g., MSTRG.28630.12, MSTRG.28660.14, MSTRG.28099.7). And through dual luciferase and other experiments, it was further confirmed that PIP5K1A is the target gene of miR-34c-5p. This finding provides new insights into the molecular mechanism by which melatonin promotes villi growth in cashmere.

Investigating the Wound-Healing Potential of a Nanoemulsion-Gel Formulation of Pituranthos tortuosus Essential Oil.

This study explores a nanoemulsion (NE)-based gel incorporating Tunisian Pituranthos tortuosus essential oil, with a focus on its wound-healing potential. The essential oil, extracted via hydrodistillation, underwent GC-MS analysis for compositional verification. The physicochemical characterization included dynamic light scattering (DLS), transmission electron microscopy (TEM), zeta potential measurement, pH, and viscosity. The gelification of the NE facilitated topical application. The results revealed an average extraction yield of 0.45% and identified 38 compounds in the essential oil. The NE exhibited a particle size of 27 ± 0.4 nm, a polydispersity index (PDI) of 0.3, and a zeta potential of -22.8 ± 1.4 mV. The stability of the gelified preparation was confirmed through thermodynamic stability studies, TEM observations, and zeta and size results. In vivo experiments confirmed significant wound-healing effects, highlighting the promising role of the NE-based gel in healthcare advancements. This research underscores the potential of novel phyto-based delivery systems in wound care.

Synthesis and self-assembly behaviors of α-galactosyl ceramide (1,2)-polysaccharide analogue

α-Galactosyl ceramide (GalCer) as a glycolipid has been long used as a standard reference for positive control in natural killer T cell studies. The (1,2)-disaccharide analogue of GalCer attracts a special attention in the study of lysosomal glycolipid processing. This paper describes the synthesis and self-assembly behaviors of GalCer 1,2-polysaccharide analogue (PolyGalCer), having considered the 1,2-disaccharide analogue as a structural motif. The synthesis of PolyGalCer is performed via one-pot glycosidation technique of 1,2-linked oligogalactan exploiting chain polymerization of galactose-based cyclic sulfite as a monomer initiated with ceramide-based alcoholic aglycon. Through the concentration dependence of PolyGalCer solutions in water or in MeOH on the turbidity, it is found that PolyGalCer forms associates in both media. From the intersection points, the critical aggregation concentration (CAC) values of PolyGalCer in water and MeOH were estimated. To know the self-assembly and the thermal transition behaviors, we performed dynamic light scattering (DLS) analysis of the associates comprising PolyGalCer in water. The transmission electron microscopy observations of the aqueous sample solution indicate that the solution of PolyGalCer includes large spherical associates. The results clarify that the 1,2-galactan moiety of PolyGalCer skeleton contributes on the kinetic inhibition of large associate formation and the metamorphosis of associates.

Mechanical properties and deformation mechanisms of single crystal Mg micropillars subjected to high-strain-rate C-axis compression

The mechanical properties and deformation mechanisms of single crystal magnesium under c-axis quasi-static and high-strain rate compressions are investigated through in situ scanning electron microscope (SEM) experiments and post-mortem transmission electron microscope (TEM) characterization. The findings revealed that ductility and high rates of hardening are preserved for pillars as large as 15 μm. Furthermore, rate effects result in a mild increase in flow stress with plastic deformations controlled primarily by the slip of <a+c> type dislocations. Importantly and in contrast to other literature reports, plastic deformation occurs in the absence of twining. As the strain increases and plastic deformation exceeds about 4%, crystal rotation activates basal slip, <a> type dislocations, resulting in a more rate independent flow stress. TEM observation on micropillars compressed at a strain rate of 250/s, revealed the activation of {112‾2‾}<1‾1‾23> slip systems and high mobility of screw dislocations as major contributors to plastic strains in excess of 10% without fracture. These findings are relevant to the design of lightweight materials used in transportation systems, e.g., selection of material grain size. Moreover, the experimental data here reported provides the materials science community with a unique opportunity to validate discrete dislocation dynamics (DDD) formulations employed in multiscale design of materials.

Microstructure and structural modulation of lutetium dihydride LuH2 as seen via transmission electron microscopy

Structural investigations conducted using transmission electron microscopy (TEM) on LuH2 synthesized under atmospheric pressure (AP-LuH2) and nitrogen-doped LuH2 synthesized under high pressure (HP-LuH2) have revealed numerous microstructural phenomena. Both materials show a clear superstructure modulation with wave vector, q*=14(22¯0), and this modulation can be interpreted by the displacements of Lu atoms. Further investigations on the nitrogen-doped HP-LuH2 materials reveal the appearance of high-density antiphase boundaries, in particular, domain walls of a few atomic layer thickness without structural modulation can be observed, suggesting possible interface properties could be detected in this system. In-situ TEM observations of AP-LuH2 suggest that no evident structural phase transition occurs between 94 K and 673 K.

Effects of Aging Treatments on the Age Hardening Behavior and Microstructures in an Al-Mg-Si-Cu Alloy

In this study, we investigated the effects of modified aging treatments on the microstructures and hardness in a commercial 6016 Al alloy through hardness tests and transmission electron microscopy (TEM) observations. The results demonstrate that many fine needle-like β″ phases contribute to the high hardness of peak-aged (T6) alloys. Over-aging treatments lead to the precipitation of lath-like β′, β″/disordered, or B′/disordered composite phases. Moderate over-aging treatment results in the coarsening of grain boundary precipitates (GBPs) and widening of the precipitate-free zone (PFZ), while heavy over-aging treatment triggers the re-precipitation of Cu-containing GBPs and increases the number density of GBPs. A retrogression and re-aging (RRA) treatment precipitates β″, lath-like β′, and disordered phases, while a two-step aging (T78) treatment precipitates β″, B′, and disordered phases. Both the T78 and the RRA treatments lead to the coarsening of GBPs and the widening of PFZs. The decreased hardness during over-aging treatments is attributed to a combination of coarsening intragranular precipitates and/or wider PFZs. The T78 and RRA tempers achieve 95.5% and 94% of the hardness values of the T6 treatment, respectively. The hardness values of the RRA and T78 treated alloys are related to the finer nano-sized precipitates formed during the high temperature process. These precipitates can compensate for the loss of hardness caused by the increase in the widths of the PFZs and the coarsening of the matrix precipitates. The relationship between the hardness and microstructures such as PFZs and precipitates in the matrix during various heat treatments is elucidated.

Integrated transmission electron microscopy and proteomic analyses reveal the cytoarchitectural response to cucumber mosaic virus infection in tobacco

Cucumber mosaic virus (CMV) causes huge economic losses to agriculture every year; thus, understanding the mechanism of plant resistance to CMV is imperative. In this study, an integrated analysis of transmission electron microscopy (TEM) observations and proteomic results was used to identify cytoarchitectural differences in Nicotiana tabacum cv. NC82 (susceptible) and cv. Taiyan 8 (T.T.8; resistant) following infection with CMV. The TEM observations showed that the structure of the chloroplasts and mitochondria was severely damaged at the late stage of infection in NC82. Moreover, the chloroplast stroma and mitochondrial cristae were reduced and disaggregated. However, in T.T.8, organelle structure remained largely intact Selective autophagy predominated in T.T.8, whereas non-selective autophagy dominated in NC82, resembling cellular disorder. Proteomic analysis of T.T.8 revealed differentially expressed proteins (DEPs) mostly associated with photosynthesis, respiration, reactive oxygen species (ROS) scavenging, and cellular autophagy. Biochemical analyses revealed that ROS-related catalase, autophagy-related disulfide isomerase, and jasmonic acid and antioxidant secondary metabolite synthesis-related 4-coumarate:CoA ligase (Nt4CL) exhibited different trends and significant differences in expression in the two cultivars after CMV inoculation. Furthermore, mutant phenotyping verified that reduced Nt4CL expression impaired resistance in T.T.8. The identified DEPs are crucial for maintaining intracellular homeostatic balance and likely contribute to the mechanism of CMV resistance in tobacco. These findings increase our understanding of plant cytological mechanisms conferring resistance to CMV infection.

Evaluation of the antidermatophytic activity of potassium salts of N-acylhydrazinecarbodithioates and their aminotriazole-thione derivatives

Nowadays, dermatophyte infections are relatively easy to cure, especially since the introduction of orally administered antifungals such as terbinafine and itraconazole. However, these drugs may cause side effects due to liver damage or their interactions with other therapeutics. Hence, the search for new effective chemotherapeutics showing antidermatophyte activity seems to be the urge of the moment. Potassium salts of N-acylhydrazinecarbodithioates are used commonly as precursors for the synthesis of biologically active compounds. Keeping that in mind, the activity of a series of five potassium N-acylhydrazinecarbodithioates (1a–e) and their aminotriazole-thione derivatives (2a–e) was evaluated against a set of pathogenic, keratinolytic fungi, such as Trichophyton ssp., Microsporum ssp. and Chrysosporium keratinophilum, but also against some Gram-positive and Gram-negative bacteria. All tested compounds were found non-toxic for L-929 and HeLa cells, with the IC30 and IC50 values assessed in the MTT assay above 128 mg/L. The compound 5-amino-3-(naphtalene-1-yl)-4,5-dihydro-1H-1,2,4-triazole-5-thione (2d) was found active against all fungal strains tested. Scanning Electron Microscopy (SEM) revealed inhibition of mycelium development of Trichophyton rubrum cultivated on nail fragments and treated with 2d 24 h after infection with fungal spores. Transmission Electron Microscopy (TEM) observation of mycelium treated with 2d showed ultrastructural changes in the morphology of germinated spores. Finally, the RNA-seq analysis indicated that a broad spectrum of genes responded to stress induced by the 2d compound. In conclusion, the results confirm the potential of N-acylhydrazinecarbodithioate derivatives for future use as promising leads for new antidermatophyte agents development.

A missense mutation in the Hspa8 gene encoding heat shock cognate protein 70 causes neuroaxonal dystrophy in rats.

Neuroaxonal dystrophy (NAD) is a neurodegenerative disease characterized by spheroid (swollen axon) formation in the nervous system. In the present study, we focused on a newly established autosomal recessive mutant strain of F344-kk/kk rats with hind limb gait abnormalities and ataxia from a young age. Histopathologically, a number of axonal spheroids were observed throughout the central nervous system, including the spinal cord (mainly in the dorsal cord), brain stem, and cerebellum in F344-kk/kk rats. Transmission electron microscopic observation of the spinal cord revealed accumulation of electron-dense bodies, degenerated abnormal mitochondria, as well as membranous or tubular structures in the axonal spheroids. Based on these neuropathological findings, F344-kk/kk rats were diagnosed with NAD. By a positional cloning approach, we identified a missense mutation (V95E) in the Hspa8 (heat shock protein family A (Hsp70) member 8) gene located on chromosome 8 of the F344-kk/kk rat genome. Furthermore, we developed the Hspa8 knock-in (KI) rats with the V95E mutation using the CRISPR-Cas system. Homozygous Hspa8-KI rats exhibited ataxia and axonal spheroids similar to those of F344-kk/kk rats. The V95E mutant HSC70 protein exhibited the significant but modest decrease in the maximum hydrolysis rate of ATPase when stimulated by co-chaperons DnaJB4 and BAG1 in vitro, which suggests the functional deficit in the V95E HSC70. Together, our findings provide the first evidence that the genetic alteration of the Hspa8 gene caused NAD in mammals.

Interfacial structure changes between amorphous silicon anode/liquid electrolyte using a highly dense and flat model electrode

AbstractChanges in the interfacial structures of the amorphous silicon (a-Si) anode/organic electrolyte interfaces in lithium-ion batteries were investigated using highly dense a-Si films fabricated by cathodic arc plasma deposition as a model electrode. Raman spectroscopy, transmission electron microscopy (TEM), and X-ray reflectivity revealed that the Si films were grown in an amorphous state with an atomically flat surface. The a-Si films exhibited lithium alloying and de-alloying reactions, with a large irreversible capacity during the first cycle. The irreversible capacity was derived from the formation of a solid electrolyte interphase (SEI) along with an incompletely de-alloyed Li-Si phase, as confirmed by ex situ TEM and X-ray photoelectron spectroscopy observations. The discharge and charge capacities of the Si films gradually decreased in the subsequent cycles, despite the fact that no further SEI formation or cracking of the Si layer occurred. Scanning electron microscopy observations combined with energy-dispersive X-ray spectroscopy revealed the miniaturization of the a-Si film in the surface region to generate domains measuring less than a few hundred nanometers. These results suggest that delamination and miniaturization of the a-Si nanodomains from the electrode surface are partly responsible for degradation of the a-Si anode.

Microfabricated double-tilt apparatus for transmission electron microscope imaging of atomic force microscope probe.

Atomic force microscopy (AFM) uses a scanning stylus to directly measure the surface characteristics of a sample. Since AFM relies on nanoscale interaction between the probe and the sample, the resolution of AFM-based measurement is critically dependent on the geometry of the scanning probe tip. This geometry, therefore, can limit the development of related applications. However, AFM itself cannot be effectively used to characterize AFM probe geometry, leading researchers to rely on indirect estimates based on force measurement results. Previous reports have described sample jigs that enable the observation of AFM probe tips using Transmission Electron Microscopy (TEM). However, such setups are too tall to allow sample tilting within more modern high-resolution TEM systems, which can only tilt samples less than a few millimeters in thickness. This makes it impossible to observe atomic-scale crystallographic lattice fringes by aligning the imaging angle perfectly or to view a flat probe tip profile exactly from the side. We have developed an apparatus that can hold an AFM tip for TEM observation while remaining thin enough for tilting, thereby enabling atomic-scale tip characterization. Using this technique, we demonstrated consistent observation of AFM tip crystal structures using tilting in TEM and found that the radii of curvature of nominally identical probes taken from a single box varied widely from 1.4nm for the sharpest to 50nm for the most blunt.

Histopathological effects of the fruit extract of Citrullus colocynthis on the ovary of the tick Hyalomma dromedarii

Hyalomma dromedarii is the predominant tick species parasitizing camels in Egypt which leads to mortalities in young animals that result in economic losses. It can transmit a lot of pathogens to animals and humans, such as the Crimean-Congo hemorrhagic fever virus, the Dhori virus, Kadam virus, Theileria annulata and spotted fever rickettsia. The continuous use of chemical acaricides has negative impact on the environment and almost led to acaricidal resistance, and hence the plant extracts represent alternative methods for controlling ticks. The present study was carried out to assess the histopathological effects on the ovary of fed female Hyalomma dromedarii following immersion in the ethanolic extract of fruits of Citrullus colocynthis (100 mg/mL). Light, scanning and transmission electron microscopy observations provided evidence that Citrullus colocynthis caused extensive damage to oocytes. Destruction of the internal organelles of oocytes, along with delay and/or inhibition of vitellogenesis were demonstrated. This is the first histological study that points to damage in H. dromedarii ovaries following treatment with the ethanolic extract of fruits of C. colocynthis. The data presented suggest that the plant extract affects the ovary either directly by entering the oocytes and/or indirectly by damaging the gut cells and digestion of blood that interfere with the development of oocytes, so it can be used as a promising agent for tick control.

Multi-Technique Characterization of 3.45 Ga Microfossils on Earth: A Key Approach to Detect Possible Traces of Life in Returned Samples from Mars.

The NASA Mars 2020 Perseverance rover is actively exploring Jezero crater to conduct analyses on igneous and sedimentary rock targets from outcrops located on the crater floor (Máaz and Séítah formations) and from the delta deposits, respectively. The rock samples collected during this mission will be recovered during the Mars Sample Return mission, which plans to bring samples back to Earth in the 2030s to conduct in-depth studies using sophisticated laboratory instrumentation. Some of these samples may contain traces of ancient martian life that may be particularly difficult to detect and characterize because of their morphological simplicity and subtle biogeochemical expressions. Using the volcanic sediments of the 3.45 Ga Kitty's Gap Chert (Pilbara, Australia), containing putative early life forms (chemolithotrophs) and considered as astrobiological analogues for potential early Mars organisms, we document the steps required to demonstrate the syngenicity and biogenicity of such biosignatures using multiple complementary analytical techniques to provide information at different scales of observation. These include sedimentological, petrological, mineralogical, and geochemical analyses to demonstrate macro- to microscale habitability. New approaches, some unavailable at the time of the original description of these features, are used to verify the syngenicity and biogenicity of the purported fossil chemolithotrophs. The combination of elemental (proton-induced X-ray emission spectrometry) and molecular (deep-ultraviolet and Fourier transform infrared) analyses of rock slabs, thin sections, and focused ion beam sections reveals that the carbonaceous matter present in the samples is enriched in trace metals (e.g., V, Cr, Fe, Co) and is associated with aromatic and aliphatic molecules, which strongly support its biological origin. Transmission electron microscopy observations of the carbonaceous matter documented an amorphous nanostructure interpreted to correspond to the degraded remains of microorganisms and their by-products (extracellular polymeric substances, filaments…). Nevertheless, a small fraction of carbonaceous particles has signatures that are more metamorphosed. They probably represent either reworked detrital biological or abiotic fragments of mantle origin. This study serves as an example of the analytical protocol that would be needed to optimize the detection of fossil traces of life in martian rocks.

Dislocation avalanches in nanostructured molybdenum nanopillars

We investigate intermittent plasticity in nanopillars of nanocrystalline molybdenum based on in situ transmission electron microscopy observations. By correlating electron imaging results with the measured nanopillar mechanical response, we demonstrate that the intermittent plasticity in nanocrystalline molybdenum is largely caused by dislocation avalanches. Electron imaging further reveals three types of dislocation avalanches, from intragranular to transgranular to cross-granular avalanches. The measured strain bursts resulted from avalanches have similar magnitudes to those reported for the molybdenum single-crystal pillars, while the corresponding flow stress in nanocrystalline molybdenum is greatly enhanced by the small grain size. Statistical analysis also shows that the avalanches behavior has similar characteristic as single crystals in the mean field theory model. Together, our findings here provide critical insights into the deformation mechanisms in a nanostructured body-centered-cubic metal.