Transient Computational Fluid Dynamics Simulations Research Articles

Transient Performance Analysis of Centrifugal Left Ventricular Assist Devices Coupled With Windkessel Model: Large Eddy Simulations Study on Continuous and Pulsatile Flow Operation.

Computational fluid dynamics (CFD) simulations are widely used to develop and analyze blood-contacting medical devices such as left ventricular assist devices (LVADs). This work presents an analysis of the transient behavior of two centrifugal LVADs with different designs: HeartWare VAD and HeartMate3. A scale-resolving methodology is followed through Large Eddy Simulations, which allows for the visualization of turbulent structures. The three-dimensional (3D) LVAD models are coupled to a zero-dimensional (0D) 2-element Windkessel model, which accounts for the vascular resistance and compliance of the arterial system downstream of the device. Furthermore, both continuous- and pulsatile-flow operation modes are analyzed. For the pulsatile conditions, the artificial pulse of HeartMate3 is imposed, leading to a larger variation of performance variables in HeartWare VAD than in HeartMate3. Moreover, CFD results of pulsatile-flow simulations are compared to those obtained by accessing the quasi-steady maps of the pumps. The quasi-steady approach is a predictive tool used to provide a preliminary approximation of the pulsatile evolution of flow rate, pressure head, and power, by only imposing a speed pulse and vascular parameters. This preliminary quasi-steady solution can be useful for deciding the characteristics of the pulsatile speed law before running a transient CFD simulation, as the former entails a significant reduction in computational cost in comparison to the latter.

Design and analysis of a 20-feet modular cold storage system

Cold storage plays an essential role in the cold supply chain, especially for fishery products. Compact cold storage systems that can be easily moved across various locations are attractive for archipelagic regions. This study aims to design and analyze a 20-ft modular cold storage system. The design stages include the development of a geometrical model, calculation of cooling load, and selection of a refrigeration machine. The analysis of the designed cold storage system was performed using transient computational fluid dynamic simulations using Ansys Fluent. The compact 20-ft cold storage design consists of three main rooms: the anteroom, air blast freezer room, and freezer storage room. The calculation results showed a maximum cooling load of about 6.6 kW occurring in the air blast freezer room at noon. According to the temperature distribution from the transient computational fluid dynamic simulation, each room had different cooling characteristics, with the highest cooling rate of 94.59 W/h in the air blast freezer room, achieving a targeted temperature of −40 °C in 5 h.

Three-dimensional transient CFD simulation of lignite chemical looping gasification in a circulating fluidized bed

In this work, a full-loop 3D computational fluid dynamics (CFD) numerical simulation of the chemical looping gasification (CLG) process of lignite in a circulating fluidized bed (CFB) was performed using a two-fluid Eulerian-Eulerian model. The results showed that the CFD simulation effectively captured the axial and radial velocities of the particles. More radial flow occurred in the bottom part of the riser and inside the cyclone. The exothermic reaction became dominant within 7s, while the heat-absorbing reaction became dominant between 7 and 15s. The aggregation regions of syngas moved up with that of the high-temperature zone, and CO was the main contributor to the syngas. The particle size in the range of 175–225 μm was inversely proportional to the size of the average heat transfer coefficient (HTC) in the riser. Extremely small particle size saturated the bed, suppressing the HTC. The peak of the HTC was 387.7 W/(m2·K), which occurred in the upper-middle region of the riser and reached. The maximum HTC average value was 180.6 W/(m2·K). Finally, experimental data were used to verify the reliability of the model.

In silico hemodynamical simulations show additional benefits of artery wall softening induced by antihypertensive drugs

Background and objectivesAge-related arterial stiffening increases peripheral resistance and decreases arterial distensibility, thus contributing to hypertension, an important risk factor of atherosclerosis. It causes abnormal blood flow, endothelial dysfunction, higher pulse wave velocity, and consequently elevated pressure wave amplitude. MethodsThis paper presents the influence of these changes via multiscale 3D-0D transient computational fluid dynamics simulations of blood flow in five patient-specific geometries of human carotid bifurcation using archetypal flow waveforms for young and old subjects. ResultsThe proposed model shows a significant decrease in the time-averaged wall shear stress (TAWSS) for the old archetypal flow waveform. This is in good agreement with clinical data on a straight segment of common carotid arteries available for young and old subjects. Moreover, our study showed that the decrease of area-averaged TAWSS related to the old flow waveform is much more pronounced (2.5 ÷ 4.5 times higher) at risk areas (areas showing TAWSS below its threshold value of 0.48 Pa) than in straight segments commonly considered in clinical studies. ConclusionsSince arterial stiffness can be lowered through long-term usage of any of the five basic groups of antihypertensives, possible benefits of such medical therapy could be not only lowering blood pressure and peripheral resistance but also in increasing the TAWSS and thus attenuating an important mechanism of the atherosclerotic process.

Effect of NaX Zeolite Mass and Baffle Presence on Copper Sorption

Sorption is often conducted in stirred batch reactors without assessing the impact of mixing on yield and costs. Operating the mixing in the batch reactor at a state of complete suspension, <i>i.e.</i>, at just suspended impeller speed, <i>N</i><sub>JS</sub>, is a compromise between these conflicting goals. Therefore, copper sorption on NaX zeolite using a pitched blade turbine was conducted in both baffled and unbaffled batch reactors at <i>N</i><sub>JS</sub>. Maintaining constant impeller to reactor diameter ratio (<i>D</i>/<i>d</i><sub>T</sub> = 0.32), and impeller off-bottom clearance (<i>C/H</i> = 0.33), kinetic sorption experiments were performed. Besides kinetic sorption experiments and the kinetic analysis of data obtained, to gain insight into the hydrodynamic behaviour of the system, transient multiphase computational fluid dynamics simulations (CFD) were performed.<br /> The <i>N</i><sub>JS</sub> speed is related to the particle settling speed, wherein a higher zeolite suspension mass concentration requires a greater NJS speed, resulting in increased energy consumption. The differences in <i>N</i><sub>JS</sub> speeds for the investigated zeolite suspension mass concentrations were found to be insubstantial, and therefore, the increase in mixing intensity for the tested systems was not deemed significant. Regardless of the zeolite mass used, the values of <i>N</i><sub>JS</sub> and <i>P</i><sub>JS</sub> (mixing power consumption) were consistently higher in the unbaffled reactor. The hydrodynamic conditions employed were found to have no significant effect on the maximum amount of copper sorbed or process efficiency, but was significantly affected by zeolite mass. The kinetics were affected by both, and, generally, sorption occurred faster in the unbaffled reactor.

Positive Pressure and Negative Pressure Irrigation Dynamics with Different Needle Designs Using Computational Fluid Dynamics

This study aimed to investigate the irrigation dynamics of the positive pressure side-vented (SV) needle, EndoVac (micropores) needle and modified apical negative pressure (mANP) open-ended needle using computational fluid dynamics (CFD). A simulation of a prepared root canal (conical frustum) of 15 mm length with an apical diameter of 0.40 mm following Protaper F4 apical preparation was created using three-dimensional (3D) CAD software. The 3D simulated needle of SV 30G needle, EndoVac with micropores needle and mANP, 30G flat open-ended needle were also created. The irrigation dynamics were evaluated through transient CFD simulations. In addition, the irrigation dynamics of mANP at 0.2 mm, 0.5 mm, and 1.0 mm short from the working length were also assessed. The EndoVac and mANP showed negative apical static pressure and streamline patterns able to reach the apical region, thus indicating negligible extrusion. Meanwhile, SV showed positive apical static pressure and almost nonexistent streamlines beyond the needle tip. The SV showed the highest wall shear stress (WSS) magnitude of 1030Pa whereas Endovac (161 Pa) and mANP1 (258 Pa). However, SV revealed lower average WSS (10 Pa) compared to mANP1 (13 Pa) and mANP2 (11 Pa). This is due to SV developed a localised maximum WSS opposite the open vent area only therefore, uneven distribution of WSS. The EndoVac system developed a localised maximum WSS in the pair of micropores furthest away from the apical. CFD analysis of the EndoVac, mANP and SV showed different technique approach, needle design and needle depths insertion affect the irrigation dynamics pattern and magnitude.

The importance of unsteady phenomena of ammonia/methane combustion in an experimental swirl burner: Comparison of steady-state and transient simulation results

Ammonia is a potential advanced green fuel. Combustion simulations play a crucial role in facilitating the usage of ammonia in existing combustion systems as a drop-in fuel. Choosing between the unsteady and steady simulation methods should be done carefully depending on the investigated phenomena. In this study, steady-state and transient Computational Fluid Dynamics simulations were performed using detailed chemistry of the Okafor mechanism for a wide range of ammonia/methane blend combustion under lean conditions. The results revealed that the steady-state simulations could provide close values to the unsteady mean results at the outlet in magnitude, while outlet temperature and intermediate species concentration slightly differ with ammonia concentration-dependent extents. The unsteady simulations provided valuable insights into the temporal evolution of the combustion and flow field characteristics, and the Root Mean Square and mean properties were evaluated comprehensively, indicating that the oscillations highly depend on the fuel composition. The model was validated using measurement data from the literature, including Particle Image Velocimetry, OH* chemiluminescence, and pollutant emission. The velocity and OH* distribution matched acceptably, while the CO, NO, and NO2 emissions were underpredicted, which implies necessary reaction model improvements.

Construction of a feedback control system based on CFD simulations for the 64-element Canadian SCWR

The knowledge of the dynamic behaviors of the supercritical water in the fuel bundle of the nuclear reactor is necessary for the design of the control system. For this purpose, the transient full-scale computational fluid dynamics (CFD) simulations are used to obtain the dynamic input and output data sets of the 64-element Canadian supercritical water-cooled reactor (SCWR) in this study. Subsequently, the linear dynamic models of the reactor are obtained by the system identification technique and validated by the comparison with the results from CFD simulations. Based on the linear dynamic models, a feedback control system consists of three PI/PID controllers is constructed. The objective is to regulate the system back to the design point when the reactor is subjected to disturbances. Therefore, the performance of the designed feedback control system is also evaluated in this work. It shows that the designed control system can timely minimize the deviations and return the reactor back to the desired operating condition.

Towards smart blades for vertical axis wind turbines: different airfoil shapes and tip speed ratios

Abstract. Future wind turbines will benefit from state-of-the-art technologies that allow them to not only operate efficiently in any environmental condition but also maximise the power output and cut the cost of energy production. Smart technology, based on morphing blades, is one of the promising tools that could make this possible. The present study serves as a first step towards designing morphing blades as functions of azimuthal angle and tip speed ratio for vertical axis wind turbines. The focus of this work is on individual and combined quasi-static analysis of three airfoil shape-defining parameters, namely the maximum thickness t/c and its chordwise position xt/c as well as the leading-edge radius index I. A total of 126 airfoils are generated for a single-blade H-type Darrieus turbine with a fixed blade and spoke connection point at c/2. The analysis is based on 630 high-fidelity transient 2D computational fluid dynamics (CFD) simulations previously validated with experiments. The results show that with increasing tip speed ratio the optimal maximum thickness decreases from 24 %c (percent of the airfoil chord length in metres) to 10 %c, its chordwise position shifts from 35 %c to 22.5 %c, while the corresponding leading-edge radius index remains at 4.5. The results show an average relative improvement of 0.46 and an average increase of nearly 0.06 in CP for all the values of tip speed ratio.

Investigating the impact of multi-rotor structure shadowing on tidal stream turbine performance

As the tidal stream energy sector develops, reducing the Levelised Cost of Energy (LCOE) is essential to sustain commercialisation. Modular multi-rotor foundations, with bi-directional turbines, reduce offshore operational complexity through smaller turbine diameters and lift weight, in turn reducing the device Operational Expenditure (OpEx). With the introduction of modular, multi-rotor foundations, the wake-induced impacts that these structures have on turbine performance must be investigated to better estimate energy yield, loading, and fatigue life. This study sets the scene for investigating the relationship between the turbulent wake generated by a modular ballast weighted foundation and 2-bladed Horizontal Axis Tidal Turbine (HATT) motivated by the HydroWing multi-rotor device concept. The presented work aims to determine the broader magnitude and severity of the loads and establish a robust methodology to be followed with further high-fidelity modelling. Initially, a transient RANS Computational Fluid Dynamics (CFD) simulations environment with a sliding mesh is configured and validated against experimental data. A turbine in free-stream isolation is simulated as a benchmark case with the modular foundation sequentially introduced to analyse the impact of the structure. Key findings suggest that operating turbines downstream of the multi-rotor foundation could cause a 20% fluctuation in thrust loading at a 1.82 Hz frequency resulting in a mean Cp reduction of 8% over a revolution.

Noninvasive, patient-specific computational fluid dynamics simulations of dural venous sinus pressures in idiopathic intracranial hypertension

BackgroundThe pathophysiology of Idiopathic Intracranial Hypertension (IIH) is poorly understood, making the disease difficult to properly diagnose and treat. Endovascular venous stenting has emerged as an effective non-invasive treatment option for a select cohort of IIH patients with venous sinus stenosis and elevated venous sinus pressure gradient. Unfortunately, current methods of determining patient eligibility for stenting treatment depend on highly invasive and insufficient measurement methods such as venous manometry, which can only measure pressure gradients and not other components of the complex 3D hemodynamic environment. Thus, there is a need for a non-invasive methodology for determining the 3D flow environment of the dural venous sinuses. ObjectiveTo develop a novel method of non-invasive, patient-specific computational fluid dynamic (CFD) simulation of venous sinus hemodynamics for evaluating stenting eligibility. MethodA patient with IIH and elevated sinus pressure gradient underwent MR venography, phase-contrast MR venography, and venous manometry. Patient-specific dural venous anatomy was segmented from the MR venography to construct 3D models of the venous sinuses. 3D transient patient-specific computational fluid dynamic simulations were conducted using flow velocities measured with phase-contrast MR venography as boundary conditions. ResultsSuccessful computational simulations were completed, allowing for the calculation of the spatio-temporal evolution of blood flow through the dural venous sinuses, and the quantitative examination of pressure gradients. Calculated pressure gradients from CFD were validated against venous manometry with an error of only ∼5%. ConclusionsWe have successfully developed time-resolved, patient-specific 3D computational simulations of the dural venous sinuses without assumptions at the boundary conditions for the first time. The methodology can accurately and non-invasively measure venous pressure gradients. This preliminary study serves as a proof of concept for our method to be used as a diagnostic tool for determining venous stenting eligibility, as well as a tool for advancing the general understanding of IIH pathophysiology. Statement of SignificanceThe pathophysiology of Idiopathic Intracranial Hypertension (IIH) is poorly understood making the disease difficult to properly diagnose and treat. Endovascular venous stenting has emerged as an effective non-invasive treatment option for a select cohort of IIH patients with venous sinus stenosis and elevated venous sinus pressure gradient. Our work provides a method for noninvasively determining eligibility for venous sinus stenting, avoiding costly and invasive venous manometry.

Hostile Hemodynamics in Distal Stent Graft-Induced New Entry Prior to Aortic Rupture: A Comparison of Transient versus Steady-State CFD Simulations.

Computational fluid dynamics (CFD) simulations model blood flow in aortic pathologies. The aim of our study was to understand the local hemodynamic environment at the site of rupture in distal stent graft-induced new entry (dSINE) after frozen elephant trunk with a clinically time efficient steady-flow simulation versus transient simulations. Steady-state simulations were performed for dSINE, prior and after its development and prior to aortic rupture. To account for potential turbulences due geometric changes at the dSINE location, Reynolds-averaged Navier-Stokes equations with the realizable k-ε model for turbulences were applied. Transient simulations were performed for comparison. Hemodynamic parameters were assessed at various locations of the aorta. Post-dSINE, jet-like flow due to luminal narrowing was observed which increased prior to rupture and resulted in focal neighbored regions of high and low wall shear stress (WSS). Prior to rupture, aortic diameter at the rupture site increased lowering WSS at the entire aortic circumference. Concurrently, WSS and turbulence increased locally above the entry tear at the inner aortic curvature. Turbulent kinetic energy and WSS elevation in the downstream aorta demonstrated enhanced stress on the native aorta. Results of steady-state simulations were in good qualitative agreement with transient simulations. Steady-flow CFD simulations feasible at clinical time scales prior to aortic rupture reveal a hostile hemodynamic environment at the dSINE rupture site in agreement with lengthy transient simulations. Consequently, our developed approach may be of value in treatment planning where a fast assessment of the local hemodynamic environment is essential.

Performance Optimization of Nozzle-Diffuser Piezoelectric Micropump with Multiple Vibrating Membranes by Design of Experiment (DOE) Method

During recent years, microfluidics based microelectromechanical systems (MEMSs) have found multiple applications in biomedical engineering. One of their most important implementations is fluid transfer in microliter and nanoliter scales. Nowadays, micropumps are extensively used in various medical applications such as drug delivery. In this study, the performance of a piezoelectric micropump is investigated and optimized. This micropump consists of a pump chamber and three deformable walls in a nozzle-diffuser shape, which are used to create pressure gradient between the inlet and outlet. The performance of the micropump is evaluated by transient Computational Fluid Dynamics (CFD) simulation using dynamic mesh. Then its performance is optimized using the Design of Experiment (DOE) method based on mean net outlet mass flow rate and flow reversibility at the pump outlet. The results indicate an improvement of 34.5% in mean net outlet mass flow rate and a significant decrease in reversibility. The maximum mean net outlet mass flow rate and the minimum reversibility corresponding to the optimum geometries are 95.82 mL/min and 0.05%, respectively.

Negative Pressure Irrigation Dynamics between Two Needle Designs using Computational Fluid Dynamics

Objective: This study aimed to investigate the irrigation dynamics of the EndoVac and modified apical negative pressure (mANP) using Computational Fluid Dynamics (CFD) for application in endodontic irrigation. Methodology: A simulation of a prepared root canal (conical frustum) of 12 mm length with an apical diameter of 0.40 mm following Protaper F4 apical preparation was created using three-dimensional (3D) CAD software. 3D simulated aspiration needles (EndoVac, micropores needle) and (mANP, 30G flat open-ended needle) were also created. The irrigation dynamics were evaluated through transient CFD simulations. In addition, the irrigation dynamics of mANP were also assessed at three different needle depths of insertion. Results: The EndoVac and mANP streamlines pattern showed irrigants able to reach the apical end. Both needle designs demonstrated negative static apical pressure. The mANP using an open-ended needle design revealed a higher average WSS magnitude in all three different needle depths of insertion compared to the EndoVac. Conclusion: CFD analysis of the EndoVac and mANP revealed that different needle designs and needle depth insertion affect the irrigation dynamics pattern and magnitude in a simulated root canal. The open-ended needle design of mANP1 contributed to the higher WSS magnitude, discharge coefficient, and apical static pressure compared to the EndoVac.

Flow instability control of an ultra-highly loaded transonic compressor rotor using self-excited casing bleed

Flow instability is a common issue encountered by high-speed compressors when they operate outside of their optimal range, especially in highly loaded compressors. This study investigates the potential of an unsteady passive flow control technique, self-excited bleed (SEB), which involves casing modification, to improve the base flow and stability characteristics of an ultra-highly loaded low reaction transonic compressor rotor. Through transient computational fluid dynamics simulations, we demonstrate that SEB can extend the rotor's operating range by up to 14.07%. The physical mechanism underlying this stability enhancement is the suppression of the shock-induced breakdown of the tip leakage vortex (TLV) near the blade leading edge and the attenuation of the double leakage flow by SEB. The unsteady excitation of the bleed effect dominates the tip flow and eliminates the spontaneous closed-loop feedback process based on the dynamic interaction between the TLV breakdown, the tip secondary vortex, and the blade loading. Time-resolved tip-region flow patterns elucidate the self-organization and reconstruction of this feedback mechanism. Frequency spectral analysis further reveals that the self-induced oscillation frequency of the tip leakage flow formed during the feedback process disappears, and the bleed excitation frequency replaces it as the main frequency of the tip flow field. However, increasing the bleed flow rate causes the boundary layer on the suction surface to migrate radially outward, resulting in increased flow blockage at the rear of the tip passage. These two influences of SEB are quantified by a blockage factor, and determining the optimal bleed flow rate requires a trade-off between beneficial and detrimental impacts.

Study of transient behaviors of wavefront error caused by natural convection for improving mirror seeing.

Astronomical seeing parameters calculated based on the Kolmogorov turbulence model cannot fully evaluate the effect of the natural convection (NC) above a solar telescope mirror on the image quality, as the convective air motions and temperature variations of the NC are significantly different from the Kolmogorov turbulence. In this work, a new method based on the transient behaviors and frequency characteristics of NC-related wavefront error (WFE) are investigated in detail and used to evaluate the image quality degradation caused by a heated telescope mirror, aiming to make up for the deficiency of astronomical seeing parameters with the conventional method in evaluating the image quality degradation. Transient computational fluid dynamics (CFD) simulations and WFE calculations based on discrete sampling and ray segmentation are performed to quantitatively evaluate the transient behaviors of the NC-related WFE. It clearly exhibits apparent oscillatory characteristics, which are coupled by main oscillation with low frequencies and minor oscillation with high frequencies. Moreover, the generation mechanisms of two types of oscillations are studied. The conspicuous oscillation frequencies of the main oscillation caused by heated telescope mirrors with varying dimensions are primarily lower than 1 Hz, suggesting that active optics may be adopted to correct the main oscillation of NC-related WFE while the adaptive optics may correct the minor oscillation. Furthermore, a mathematical relationship between WFE, temperature rise, and mirror diameter is derived, revealing a significant correlation between WFE and mirror diameter. Our work suggests the transient NC-related WFE should be considered as one of the critical supplements to the mirror seeing evaluation.

Steady and Time Dependent Study of Laminar Separation Bubble (LSB) behavior along UAV Airfoil RG-15

The flow around the Unmanned Arial Vehicle (UAV) operating at a low Reynolds number regime of the O() is predominantly laminar and it leads to the formation of Laminar Separation Bubble (LSB). The pressure, shear stress, and heat flux distribution are considerably affected by LSB, which affects lift, drag, and pitching moment values. Most existing RANS (Reynolds-Averaged Navier-Stokes) turbulence models are built on the assumption of fully turbulent flow. Therefore, these models require additional transport equations or reformulations or specific transition information to predict the LSB observed in low Reynolds number transition flows. Steady and transient computational fluid dynamics simulations were done using the RANS based transition turbulence model to study the behavior of LSB on UAV airfoil RG-15. The transition turbulence model can predict the LSB with considerable accuracy. The steady state and time averaged simulation results are matching in the pre stall region but deviates after stalling. High amplitude velocity fluctuations were observed near regions of transition and separation.

Numerical Evaluation of Thermal Performance of Two-Phased Closed Thermosyphon for Solar Applications

A heat pipe is an effective passive heat transfer device with a highly efficient heat transfer rate and thermal conductivity through evaporating and condensing a working fluid circulating in a vacuum-sealed container. For solar applications, heat pipes are usually used in evacuated tube collectors (ETCs). However, the use of heat pipes in solar photovoltaic/thermal (PVT) collector is limited. Generally, a heat pipe composes of three sections: the evaporator section, the condenser section, and the adiabatic section. A wickless heat pipe, also known as a closed thermosyphon or gravitationally assisted heat pipe, relies on gravity to return the working fluid to the evaporator. Various parameters could greatly influence the thermal performance of wickless heat pipes such as initial volume filling ratio (VFR), inclination angle, inner diameter of the heat pipes, ratio of evaporator/diameter and type of working fluid used. In this study, 2D transient computational fluid dynamics (CFD) simulations were performed using ANSYS Fluent to simulate the two-phase flow (water/steam) and to study the effect of different parameters on the heat transfer processes of a two-phase closed thermosyphon (TPCT) to increase its thermal performance. The 2D CFD simulations using multiphase volume of fluid (VOF) with two Eulerian phases could replicate the mass and heat transfer processes in comparison with published experimental data. A good agreement can be observed between the present CFD study with the published data in comparing the temperature profiles and thermal performance of the heat pipe. The numerical simulation of the evaporation and condensation process indicated that the thermal performance and characteristics of the TPCT are influenced by certain key parameters. In the future, full-scale 3D CFD simulations are planned to be performed to evaluate the thermal performance of heat pipes for solar photovoltaic/thermal (PVT) applications.

Inflow from a Cardiopulmonary Assist System to the Pulmonary Artery and Its Implications for Local Hemodynamics—a Computational Fluid Dynamics Study

When returning blood to the pulmonary artery (PA), the inflow jet interferes with local hemodynamics. We investigated the consequences for several connection scenarios using transient computational fluid dynamics simulations. The PA was derived from CT data. Three aspects were varied: graft flow rate, anastomosis location, and inflow jet path length from anastomosis site to impingement on the PA wall. Lateral anastomosis locations caused abnormal flow distribution between the left and right PA. The central location provided near-physiological distribution but induced higher wall shear stress (WSS). All effects were most pronounced at high graft flows. A central location is beneficial regarding flow distribution, but the resulting high WSS might promote detachment of local thromboembolisms or influence the autonomic nervous innervation. Lateral locations, depending on jet path length, result in lower WSS at the cost of an unfavorable flow distribution that could promote pulmonary vasculature changes. Case-specific decisions and further research are necessary.Graphical

Quantitative evaluation of precautions against the COVID-19 indoor transmission through human coughing

In this work, we focus on the dispersion of COVID-19-laden droplets using the transient computational fluid dynamics (CFD) modeling and simulation of the coughing process of virus carriers in an enclosure room, aiming to set up the basic prototype of popular precautionary strategies, i.e., face mask, upward ventilation, protective screen, or any combination thereof, against the indoor transmission of COVID-19 and other highly contagious diseases in the future. A multi-component Eulerian–Lagrangian CFD particle-tracking model with user-defined functions is utilized under 8 cases to examine the characteristics of droplet dispersion concerning the mass and heat transfer, droplet evaporation, air buoyancy, air convection, air-droplet friction, and turbulent dispersion. The result shows that implementing upward ventilation is the most effective measure, followed by wearing face masks. Protective screens can restrict the movement of the coughing droplets (though it will not reduce viral load). However, applying protective screens arranged with lean can be counterproductive in preventing the spread of COVID-19 when it is inappropriately placed with ventilation. The soundest solution is the combination of the face mask and upward ventilation, which can reduce the indoor infectious concentration by nearly 99.95% compared with the baseline without any precautionary strategies. With the resumption of school and work in the post-epidemic era, this study would provide intelligence-enhancing advice for the masses and rule-makers to curb the pandemic.