Transform Fault Zone Research Articles

Contrasting transform and passive margin subsidence history and heat flow evolution: insights from 3D thermo-mechanical modelling

Abstract Transform and passive margins developed during the continental rifting and opening of oceanic basins are fundamental elements of plate tectonics. It has been suggested that inherited structures, plate divergence velocities and surface processes exert a first-order control on the topographic and bathymetric evolution and thermal history of these margins and related sedimentary basins. Their complex spatial-temporal dynamics have remained controversial. Here, we conducted 3D magmatic-thermo-mechanical numerical experiments coupled with surface processes modelling to simulate the dynamics of continental rifting, continental transform fault zone formation as well as persistent oceanic transform faulting and zero-offset oceanic fracture zones development. Numerical modelling results allow to explain the first-order observations from passive and transform margins, such as diachronous rifting, heat flow rise and cooling in individual depocentres as well as contrasting basin tectonics of extensional and transtensional origin. In addition, the models reproduce the rise of both marginal ridges and transform marginal plateaus, and their interaction with erosion and sedimentation. Comparison of model results with observations from natural examples yields new insights into the tectono-sedimentary and thermal evolution of several key passive and transform continental margins worldwide.

A regional scale Cretaceous transform fault zone at the northern Austroalpine margin: Geology of the western Ammergau Alps, Bavaria

Abstract We reinvestigated parts of the northern Austroalpine margin and provided structural and kinematic field data in order to interpret the kinematic relationship between the Cenoman-Randschuppe (CRS) marginal slice, Falkensteinzug (FSZ), Tannheim- and Karwendel thrust sheets occurring in a narrow strip at the northern front of the northwestern Northern Calcareous Alps (NCA). As a consequence, we propose a revised model for the tectonic evolution of the northern Austroalpine margin. As thrusting propagates from SSE to NNW (Cretaceous orogeny), the Karwendel thrust sheet (including its frontal part, the FSZ) was emplaced onto the Tannheim thrust sheet in the Albian, deduced from (i) upper-footwall deposits, the youngest sediments below the Karwendel thrust (Tannheim- and Losenstein Fms.), and (ii) thrust-sheet-top deposits unconformably overlying the deeply eroded northern Karwendel thrust sheet (Branderfleck Fm.). The future CRS marginal slice was, at that time, part of the foreland of this Early Cretaceous Alpine orogenic wedge. Pervasive overprint by sinistral shear within the CRS marginal slice and northern Tannheim thrust sheet suggests sinistral W-E striking transform faults cutting across this foreland, decoupling CRS marginal slice and FSZ from the main body of the NCA and enabling an independent evolution of the CRS marginal slice from the Early Cretaceous onwards. Subsequent Late Cretaceous and younger shortening leads to successive incorporation of Arosa zone, Rhenodanubian Flysch (RDF) and Helvetic units into the Alpine nappe stack; the Tannheim thrust representing the basal thrust of the NCA. Growth strata within thrust-sheet-top deposits (Branderfleck-Fm.) give evidence for refolding of thrust sheet boundaries. In a typical thin-skinned fold-and-thrust belt, deformation should cease towards the thrust front, whereas within the NCA it increases. An Austroalpine thrust front controlled by E-trending transform faults could cause an increase in deformation towards the most external NCA and explain the absence of the Arosa zone between Allgäu and Vienna. Such faults would most probably also cut out Lower Austroalpine units. Therefore, RDF and CRS marginal slice are juxtaposed; the latter found in the tectonic position of the Arosa zone. The presence of transform faults underlines the strong imprint of the opening of the North Atlantic Ocean on the depositional setting and tectonic evolution of the NCA.

The Limpopo Magma‐Rich Transform Margin, South Mozambique – 2: Implications for the Gondwana Breakup

AbstractThe rifted continental margins of Mozambique provide excellent examples of continental passive margins with a significant structural variability associated with magmatism and inheritance. Despite accumulated knowledge, the tectonic structure and nature of the crust beneath the South Mozambique Coastal Plain (SMCP) are still poorly known. This study interprets high‐resolution seismic reflection data paired with data from industry‐drilled wells and proposes a structural model of the Limpopo transform margin in a magma‐rich context. Results indicate that the Limpopo transform margin is characterized by an ocean‐continent transition that links the Beira‐High and Natal valley margin segments and represents the western limit of the continental crust, separating continental volcano‐sedimentary infilled grabens from the oceanic crust domain. These basins result from the emplacement of the Karoo Supergroup during a Permo‐Triassic tectonic event, followed by an Early Jurassic tectonic and magmatic event. This latter led to the establishment of steady‐state seafloor spreading at ca.156 Ma along the SMCP. A Late Jurassic to Early Cretaceous event corresponds to formation of the Limpopo transform fault zone. Which accommodated the SSE‐ward displacement of Antarctica with respect to Africa. We define a new type of margin: the magma‐rich transform margin, characterized by the presence of voluminous magmatic extrusion and intrusion coincident with the formation and evolution of the transform margin. The Limpopo transform fault zone consists of several syn‐transfer and ‐transform faults rather than a single transform fault. The intense magmatic activity was associated primarily with mantle dynamics, which controlled the large‐scale differential subsidence along the transform margin.

The Cuban staircase sequences of coral reef and marine terraces: A forgotten masterpiece of the Caribbean geodynamical puzzle

The emerged sequences of coral reef and marine terraces of the Cuban Archipelago have been recognized since the end of the 19th century but with noticeable exceptions, their bio-constructions and/or deposits are not dated. The northern Caribbean islands and associated archipelagos are located in a left-lateral strike-slip tectonic setting, at the boundary between the North America and Caribbean plates. Cuba is the only landmass located on the American Plate directly adjacent to this transform fault zone. Quantifying upper Pleistocene coastal uplift is thus key to elucidate the recent vertical deformation of the Caribbean geodynamic puzzle with regards to the active tectonic segmentation of this area. We compiled bibliographic data and present new measurements concerning the Cuban sequences of coral reef and marine terraces; maximum elevations, minimum number of successive strandlines and elevation of the lowermost terrace. The Cuban Archipelago exhibits five main uplifting coastal stretches separated by subsiding areas, with at least 23 emerged staircase sequences of coastal terraces. At four sites, the lowest coral reef terrace has been previously correlated to the Last Interglacial Maximum (MIS 5e, 122 ± 6 ka). At nine sites, we extended the morpho-stratigraphy to derive Upper Pleistocene apparent and eustasy-corrected uplift rates. Alongshore Cuba, MIS 5e coastal terraces and associated shoreline angles occur at elevations ranging from 7 m to 40 m, yielding eustasy-corrected uplift rates ranging from 0.06 ± 0.01 mm.yr−1 (NW Cuba) to 0.33 ± 0.01 mm.yr−1 (SE Cuba). More than 400 km northward of the transform fault, eustasy-corrected uplift rates (0.13 mm.yr−1) suggest that the whole Cuban Archipelago is affected by the North America/Caribbean plate motion, with a partitioned compressive component resulting in block tectonics with tilting controlled by regional faults.

Shear Zone Development in Serpentinized Mantle: Implications for the Strength of Oceanic Transform Faults

AbstractOceanic transform faults display fewer and smaller‐magnitude earthquakes than expected for their length. Several mechanisms have been inferred to explain this seismic slip deficit, including increased fault zone damage resulting in elevated fluid flow, and the alteration of olivine to serpentine. However, to date, these possible mechanisms are not supported by direct observation. We use micro to kilometer scale observations from an exhumed oceanic transform fault in the Troodos Ophiolite, Cyprus, to determine mineral‐scale deformation mechanisms and infer likely controls on seismic behavior of serpentinized lithospheric mantle in active oceanic transform faults. We document a range of deformation fabrics including massive, scaly and phyllonitic serpentinite, attesting to mixed brittle‐ductile deformation within serpentinite shear zones. The progressive development of a foliation, with cumulative strain, is an efficient weakening mechanism in scaly and phyllonitic serpentinite. Further weakening is promoted by a transition in the serpentine polytype from lizardite‐dominated massive and scaly serpentinites to chrysotile‐dominated phyllonitic serpentinite. The development of a foliation and polytype transition requires dissolution‐precipitation processes. Discrete faults and fractures locally crosscut, but are also deformed by, foliated serpentinites. These brittle structures can be explained by local and transient elevated strain rates, and play a crucial role in strain localization by providing positive feedback for dissolution‐precipitation by increasing permeability. We propose that the evolution in structure and deformation style documented within the serpentinized lithospheric mantle of the Southern Troodos Transform Fault Zone is a viable explanation for the dominantly creeping behavior and long‐term weakness of oceanic transform faults.

Integration of gravity, magnetic, and seismic data for subsalt modeling in the Northern Red Sea

Rifts and rifted passive margins are often associated with thick evaporite layers, which challenge seismic reflection imaging in the subsalt domain. This makes understanding the basin evolution and crustal architecture difficult. An integrative, multidisciplinary workflow has been developed using the exploration well, gravity and magnetics data, together with seismic reflection and refraction data sets to build a comprehensive 3D subsurface model of the Egyptian Red Sea. Using a 2D iterative workflow first, we have constructed cross sections using the available well penetrations and seismic refraction data as preliminary constraints. The 2D forward model uses regional gravity and magnetic data to investigate the regional crustal structure. The final models are refined using enhanced gravity and magnetic data and geologic interpretations. This process reduces uncertainties in basement interpretation and magmatic body identification. Euler depth estimates are used to point out the edges of high-susceptibility bodies. We achieved further refinement by initiating a 3D gravity inversion. The resultant 3D gravity model increases precision in crustal geometries and lateral density variations within the crust and the presalt sediments. Along the Egyptian margin, where data inputs are more robust, basement lows are observed and interpreted as basins. Basement lows correspond with thin crust ([Formula: see text]), indicating that the evolution of these basins is closely related to the thinning or necking process. In fact, the Egyptian Northern Red Sea is typified by dramatic crustal thinning or necking that is occurring over very short distances of approximately 30 km, very proximal to the present-day coastline. The integrated 2D and 3D modeling reveals the presence of high-density magnetic bodies that are located along the margin. The location of the present-day Zabargad transform fault zone is very well delineated in the computed crustal thickness maps, suggesting that it is associated with thin crust and shallow mantle.

Ιdentification of spatiotemporal seismicity clusters in central Ionian Islands (Greece)

The spatiotemporal evolution of seismicity of an accurately relocated earthquake catalog in the central Ionian Islands, Greece, is explored, by the systematic identification of the earthquake clusters over the period September 2016–December 2019. Manual waveform phase picking was the input for the relocation leading to 13,632 earthquakes that compose a data set with a completeness magnitude as low as Mc = 1.5. The clustering procedure engages a temporal stochastic point process, the Markovian Arrival Process (MAP), for an initial separation of the background seismicity from potential seismic excitations, using the changes in the seismicity rate and a density-based clustering algorithm, DBSCAN, for the detection of elevated spatial density areas. A high concentration of temporally persistent clusters is identified along the western coastline of Lefkada Island, in the parallel step-over faults between the two major fault branches of the Kefalonia Transform Fault Zone and in the Myrtos Gulf area in Kefalonia, which are spatially correlated to the positive static stress changes induced by the coseismic slip of the Mw6.5 November 17, 2015 Lefkada main shock. The method presented remarkable potential in the identification of clusters in 3-D space along with the seismicity migration during the temporal evolution of seismic sequences. Multiple secondary faults of the Kefalonia segment can be revealed and the dominant triggering mechanisms can be illuminated contributing towards the understanding of the regional faulting properties and mechanics, an outcome that cannot be achieved solely by studying the large earthquakes, due to their rarity. The temporal and spatial clustering properties of microseismicity shed light on the preparation phase of the large earthquakes as being part of this process, thus contributing to the seismic hazard assessment.

Age and mantle sources of Quaternary basalts associated with “leaky” transform faults of the migrating Anatolia-Arabia-Africa triple junction

Abstract The Anatolia (Eurasia), Arabia, and Africa tectonic plates intersect in southeast Turkey, near the Gulf of İskenderun, forming a tectonically active and unstable triple junction (the A3 triple junction). The plate boundaries are marked by broad zones of major, dominantly left-lateral transform faults including the East Anatolian fault zone (the Anatolia-Arabia boundary) and the Dead Sea fault zone (the Arabia-Africa boundary). Quaternary basalts occur locally within these “leaky” transform fault zones (similar to those observed within oceanic transform faults), providing evidence that mantle melting, basalt genesis, and eruption are linked to crustal deformation and faulting that extends into the upper mantle. We investigated samples of alkaline basalt (including basanite) from the Toprakkale and Karasu volcanic fields within a broad zone of transtension associated with these plate-boundary faults near the İskenderun and Amik Basins, respectively. Toprakkale basalts and basanites have 40Ar/39Ar plateau ages ranging from 810 ± 60 ka to 46 ± 13 ka, and Karasu volcanic field basalts have 40Ar/39Ar plateau ages ranging from 2.63 ± 0.17 Ma to 52 ± 16 ka. Two basanite samples within the Toprakkale volcanic field have isotopic characteristics of a depleted mantle source, with 87Sr/86Sr of 0.703070 and 0.703136, 143Nd/144Nd of 0.512931 and 0.512893, 176Hf/177Hf of 0.283019 and 0.282995, 206Pb/204Pb of 19.087 and 19.155, and 208Pb/204Pb of 38.861 and 38.915. The 176Hf/177Hf ratios of Toprakkale basalts (0.282966–0.283019) are more radiogenic than Karasu basalts (0.282837–0.282965), with some overlap in 143Nd/144Nd ratios (0.512781–0.512866 vs. 0.512648–0.512806). Toprakkale 206Pb/204Pb ratios (19.025 ± 0.001) exhibit less variation than that observed for Karasu basalts (18.800–19.324), and 208Pb/204Pb values for Toprakkale basalts (38.978–39.103) are slightly lower than values for Karasu basalts (39.100–39.219). Melting depths estimated for the basalts from both volcanic fields generally cluster between 60 and 70 km, whereas the basanites record melting depths of ∼90 km. Depth estimates for the basalts largely correspond to the base of a thin lithosphere (∼60 km) observed by seismic imaging. We interpret the combined radiogenic isotope data (Sr, Nd, Hf, Pb) from all alkaline basalts to reflect partial melting at the base of the lithospheric mantle. In contrast, seismic imaging indicates a much thicker (>100 km) lithosphere beneath southern Anatolia, a substantial part of which is likely subducted African lithosphere. This thicker lithosphere is adjacent to the surface locations of the basanites. Thus, the greater melting depths inferred for the basanites may include partial melt contributions either from the lithospheric mantle of the attached and subducting African (Cyprean) slab, or from partial melting of detached blocks that foundered due to convective removal of the Anatolian lithosphere and that subsequently melted at ∼90 km depth within the asthenosphere. The Quaternary basalts studied here are restricted to a broad zone of transtension formed in response to the development of the A3 triple junction, with an earliest erupted age of 2.63 Ma. This indicates that the triple junction was well established by this time. While the current position of the A3 triple junction is near the Amik Basin, faults and topographic expressions indicate that inception of the triple junction began as early as 5 Ma in a position farther to the northeast of the erupted basalts. Therefore, the position of the A3 triple junction appears to have migrated to the southwest since the beginning of the Pliocene as the Anatolia-Africa plate boundary has adjusted to extrusion (tectonic escape) of the Anatolia plate. Establishment of the triple junction over the past 5 m.y. was synchronous with rollback of the African slab beneath Anatolia and associated trench retreat, consistent with Pliocene uplift in Cyprus and with the current positions of plate boundaries. The A3 triple junction is considered to be unstable and likely to continue migrating to the southwest for the foreseeable geologic future.

Fault-based probabilistic seismic hazard assessment of the eastern Makran subduction and the Chaman transform fault, Pakistan: Emphasis on the source characterization of megathrust

Abstract Seismic source characterization (SSC) for probabilistic seismic hazard assessment (PSHA) in regions characterized by subduction megathrust involves a considerable ambiguity. Lack of detailed geologic, seismic, and geodetic data increases the uncertainties. The enigma is enhanced in regions where thin-skinned accretionary prism faults are part of active deformation. In this study, a planar SSC model for seismically active eastern Makran subduction zone, its associated accretionary prism faults and Chaman transform fault zone is proposed based on a kinematic block model accounting strain partitioning. Sensitivity tests for various parameters of the SSC model are performed by computing peak ground acceleration (PGA) maps for 475-year return period. Among alternative magnitude distribution models, the truncated exponential model gives ~10% higher PGA values than the composite recurrence model, which is favored by the observed subduction seismicity. Especially in gently dipping subduction zones such as Makran, estimated PGA values and their spatial distribution are highly sensitive (changing up to 0.3 g) to the megathrust interface geometry near the surface, dip amount, and defined depth limits. Gentler and deeper extending subduction interface maximizes the rupture width and results in higher PGA values towards inland, while the inclusion of shallow aseismic portion produces larger PGA values near the trench. Through eastward transition from subduction to transform motion, thrust faults within the Makran accretionary prism bend northward, forming oblique fault systems with higher slip rates and accommodate part of the compression in accordance with the lateral slip rate variations identified on the Chaman transform fault zone. Using the selected SSC model, the PGA values for short return period (475-year) are estimated to be between 0.5 g and 0.7 g within the accretionary prism down to the trench across the Makran subduction and along southern section of Chaman transform fault zone where slip rates are higher relative to the north.

Relocation of the 2018 Zakynthos, Greece, aftershock sequence: spatiotemporal analysis deciphering mechanism diversity and aftershock statistics

An Mw 6.8 earthquake occurred on October 25, 2018, 35 km offshore from the southwest coastlines of Zakynthos Island. The aftershock sequence appeared remarkably productive with six aftershocks of M ≥ 5.0 in the first month and tens of aftershocks with M ≥ 4.0 during the study period. The GCMT solution for the main shock suggests a very low angle plane (dip = 24°) for a dextral strike–slip faulting (rake = 165°). A similar solution is suggested for the largest aftershock (Mw 5.9) that occurred 5 days afterward. The proximity of the main shock location with the dextral active boundary of Kefalonia Transform Fault Zone (KTFZ) along with the Hellenic Subduction front supports this oblique faulting. The aftershock activity is comprised mostly in depths 5–12 km and forms eight distinctive clusters that accommodate regional strain and evidence strain partitioning. The role of stress transfer and statistical analysis are combined for detailing the highly productive aftershock sequence. Earthquake networks analysis reveals their random structure soon after the main shock, which became small-world structure after the first 200 days. Time series analysis constructed from the aftershock frequency and seismic moment release and manifested significant correlation among the eight seismicity clusters.

Seismicity along the Magallanes-Fagnano fault system

The Magallanes-Fagnano fault (at ~51-56°S) is a continental NW-SE transform fault zone that marks the boundary between the South American Plate (north) and the Scotia Plate (South). In 1949, two crustal seismic events of estimated magnitude M > 7 were located in this area using teleseismic records. Although, this region is scarcely populated, such shallow seismicity could represent a considerable threat to the remote urban centers in this sector. The characterization of the local seismicity always lacked good quality records and permanent instrumentation. In the recent past years, permanent seismic stations (CSN and INPRES-CTBTO) were deployed in the Tierra del Fuego Island and Southern Patagonia, providing with continuous time, broadband records of waveform data. In order to obtain better insights about the local seismicity associated with the Magallanes-Fagnano fault, we jointly inverted teleseismic receiver functions with Rayleigh-wave dispersion data to build a calibrated velocity model for the study region. In parallel, we analyzed the continuous waveforms to automatically detect local earthquakes and locate them using our regional velocity model. Our results show: 1) Shallow seismic events distributed along the Magallanes-Fagnano fault. 2) Diffuse seismicity characterizing the South American crust, north of 53°S. Our observations suggest two mechanisms of crustal deformation. In the Tierra del Fuego Island the seismicity is mostly associated with the Magallanes-Fagnano fault system. In the Southern Patagonia, along the Patagonian Andes the seismicity would be mostly due to isostatic rebound following the retreat of the Patagonian Ice sheet.

Τhe February-March 2019 Seismic Swarm Offshore North Lefkada Island, Greece: Microseismicity Analysis and Geodynamic Implications

A quite energetic seismic excitation consisting of one main and three additional distinctive earthquake clusters that occurred in the transition area between the Kefalonia Transform Fault Zone (KTFZ) and the continental collision between the Adriatic and Aegean microplates is thoroughly studied after the high-precision aftershocks’ relocation. The activated fault segments are in an area where historical and instrumental data have never claimed the occurrence of a catastrophic (M ≥ 6.0) earthquake. The relocated seismicity initially defines an activated structure extending from the northern segment of the Lefkada branch of KTFZ with the same NNE–SSW orientation and dextral strike slip faulting, and then keeping the same sense of motion, its strike becomes NE–SW and its dip direction NW. This provides unprecedented information on the link between the KTFZ and the collision front and sheds more light on the regional geodynamics. The earthquake catalog, which was especially compiled for this study, starts one year before the occurrence of the Mw5.4 main shock, and adequately provides the proper data source for investigating the temporal variation in the b value, which might be used for discriminating foreshock and aftershock behavior.

The Kefalonia Transform Fault: A STEP fault in the making

Vertical edges along subducted slabs have been recognized in the majority of subduction zones. Surprisingly, slab edges evolved into Subduction-Transform-Edge-Propagator (STEP) faults in only a few regions; the conditions under which STEPs form are special. It is relevant to constrain the conditions that facilitate STEP fault initiation because they leave a clear geological footprint in the overriding plate, whereas vertical tears generally do not. We therefore study a candidate region for STEP fault initiation in the western Hellenic Subduction Zone.We investigate the structure and seismicity of the shallow western Hellenic Subduction Zone using a recent full-waveform inversion model which both captures details of crustal and upper-mantle structure, yielding constraints in the depth interval from 10 to 200 km where lithosphere-mantle interactions have tectonic expressions. The western end of the Hellenic Subduction Zone is fragmented near the Kefalonia Transform Fault. We identify a separate Epirus lithospheric fragment that is roughly vertical below the southern Albanides. We also identify a new and major contrast within the lithospheric mantle of the Ionian ocean basin, which aligns with a gradient in free-air anomalies.In the overriding plate, the Kefalonia Transform Fault zone accommodates right lateral strike-slip deformation. We interpret this fault zone as a proto-STEP fault that formed simultaneously with Pliocene fragmentation of the Epirus fragment.Comparing the recent evolution of the NW Hellenic slab edge with currently active STEPs indicates that along-trench variations in convergence velocity are a prerequisite for STEP fault initiation. Such velocity variations may result from subduction of continental crust along part of the trench. Resistance to sea ward tear propagation by a mechanically strong subducting plate may prevent variations in convergence velocity to occur, and thus STEP fault initiation. The amount of time over which a velocity contrast persists will also be relevant for STEP fault initiation. Mechanical coupling between upper- and lower-plate, and the deformability of the upper-plate appear to also play a role in the initiation of the STEP fault once a slab is fragmented.

Seismicity characterization of oceanic earthquakes in the Mexican territory

Abstract. We analyzed the seismicity of oceanic earthquakes in the Pacific oceanic regime of Mexico. We used data from the earthquake catalogues of the Mexican National Service (SSN) and the International Seismological Centre (ISC) from 1967 to 2017. Events were classified into two different categories: intraplate oceanic (INT) and transform fault zone and mid-ocean ridges (TF-MOR) events, respectively. For each category, we determined statistical characteristics such as magnitude frequency distributions, the aftershocks decay rate, the nonextensivity parameters, and the regional stress field. We obtained b values of 1.17 and 0.82 for the INT and TF-MOR events, respectively. TF-MOR events also exhibit local b-value variations in the range of 0.72–1.30. TF-MOR events follow a tapered Gutenberg–Richter distribution. We also obtained a p value of 0.67 for the 1 May 1997 (Mw=6.9) earthquake. By analyzing the nonextensivity parameters, we obtained similar q values in the range of 1.39–1.60 for both types of earthquakes. On the other hand, the parameter a showed a clear differentiation, being higher for TF-MOR events than for INT events. An important implication is that more energy is released for TF-MOR events than for INT events. Stress orientations are in agreement with geodynamical models for transform fault zone and mid-ocean ridge zones. In the case of intraplate seismicity, stresses are mostly related to a normal fault regime.

Multidisciplinary Investigation of the Transform Fault Zones Doldrums and Vema during Cruise 45 of the R/V “Akademik Nikolaj Strakhov”

Herein we provide information on the integrated geological, geophysical, sedimentological, paleoceanographic, hydrophysical and biological investigations in the Central Atlantic during the cruise 45 of the R/V “Akademik Nikolaj Strakhov” in October-November 2019. The preliminary scientific results are discussed.

P–T–tevolution of the Cycladic Blueschist Unit in Western Anatolia/Turkey: Geodynamic implications for the Aegean region

AbstractEclogite and blueschist facies rocks occurring as a tectonic unit between the underlying Menderes Massif (MM) and the overlying Afyon Zone/Lycian Nappes and the Bornova Flysch Zone in western Anatolia represent the eastward continuation of the Cycladic Blueschist Unit (CBU) in Turkey. This high‐Punit is attributed to the closure of the Pindos Ocean and consists of (a) a Triassic to Upper Cretaceous coherent series derived from passive continental margin sediments and (b) the tectonically overlying Upper Cretaceous Selçuk mélange with eclogite blocks embedded in a pelitic epidote‐blueschist matrix. The coherent series has experienced epidote‐blueschist facies metamorphism (490 ± 25°C/11.5 ± 1.5 kbar; 38 km depth).40Ar/39Ar white mica and206Pb/238U monazite dating of quartz metaconglomerate from coherent series yielded middle Eocene ages of 44 ± 0.3 and 40.1 ± 3.1 Ma for epidote‐blueschist facies metamorphism, respectively. The epidote‐blueschist facies metamorphism of the matrix of the Selçuk mélange culminates at 520 ± 15°C/13 ± 1.5 kbar, 43 km depth, and is dated at 57.5 ± 0.3–54.5 ± 0.1 Ma (40Ar/39Ar phengite). Eclogite facies metamorphism of the blocks (570 ± 30°C/18 ± 2 kbar, 60 km depth) is early Eocene and dated at 56.2 ± 1.5 Ma by206Pb/238U zircon. Eclogites experienced a nearly isothermal retrogression (490 ± 40°C/~6 to 7 kbar) during their incorporation into the Selçuk mélange. The retrograde overprints of the coherent series (410 ± 15°C/7 ± 1.5 kbar from Dilek Peninsula and 485 ± 33°C/~6 to 7 kbar from Selçuk–Tire area) and the Selçuk mélange (510 ± 15°C/6 ± 1 kbar) are dated at 35.8 ± 0.5–34.3 ± 0.1 Ma by40Ar/39Ar white mica and 31.6 ± 6.6 Ma by206Pb/238U allanite dating methods, respectively. Regional geological constrains reveal that the contact between the MM and the CBU originally formed a lithosphere‐scale transform fault zone.40Ar/39Ar white mica age from the contact indicates that the CBU and the MM were tectonically juxtaposed under greenschist facies conditions during late Eocene, 35.1 ± 0.3 Ma.

An updated parametric catalog of historical earthquakes around the Dead Sea Transform Fault Zone

In this study, we present the work done to review the existing historical earthquake information of the Dead Sea Transform Fault Zone (DSTFZ). Several studies from various sources have been collected and reassessed, with the ultimate goal of creating of new homogenized parametric earthquake catalog for the region. We analyze 244 earthquakes between 31 BC and 1900, which are associated with the geographical buffer extending from 27 N to 36 N and from 31 E to 39 E. Of these, 93 were considered real seismic events with moment magnitude (Mw) greater than 5 that indeed occurred within this zone. While we relied on past parametric data and did not assign new macroseismic intensities, magnitude values, or epicenters for several controversial events, we did however resort to the primary sources to obtain a more critical perspective for the various assigned macroseismic intensities. In order to validate the derived parametric information, we tried to associate the events present in the historical records, with any evidence coming from past field investigations, i.e., geological or archaeological studies. Acknowledging the uneven quality and quantity of data reporting each event, we provided each entry with an uncertainty range estimate. Our catalog lists 33 events of Mw ≥ 6 absent from the latest published compilation with compatible time span and areal coverage. The whole catalog is considered complete down to Mw 7 and in certain areas down to Mw 6 after the year 1000, with majority of the larger earthquakes located in the part of DSTFZ, which extends from the southeast part of Dead Sea lake till Antioch.

The 2018 Mw 6.8 Zakynthos (Ionian Sea, Greece) earthquake: seismic source and local tsunami characterization

SUMMARYWe investigated the kinematic rupture model of the 2018 Mw 6.8 Zakynthos, Ionian Sea (Greece), earthquake by using a non-linear joint inversion of strong motion data, high-rate GPS time-series and static coseismic GPS displacements. We also tested inversion results against tide-gauge recordings of the small tsunami generated in the Ionian Sea. In order to constrain the fault geometry, we performed several preliminary kinematic inversions by assuming the parameter values resulting from different published moment tensor solutions. The lowest cost function values were obtained by using the geometry derived from the United States Geological Survey (USGS) focal solution. Between the two conjugate USGS planes, the rupture model which better fits the data is the one with the N9°E-striking 39°ESE-dipping plane. The rupture history of this model is characterized by a bilateral propagation, featuring two asperities; a main slip patch extending between 14 and 28 km in depth, 9 km northeast from the nucleation and a slightly shallower small patch located 27 km southwest from the nucleation. The maximum energy release occurs between 8 and 12 s, when both patches are breaking simultaneously. The maximum slip is 1.8 m and the total seismic moment is 2.4 × 1019 Nm, corresponding to a Mw value of 6.8. The slip angle shows a dominant right-lateral strike-slip mechanism, with a minor reverse component that increases on the deeper region of the fault. This result, in addition to the observed possibility of similar mechanisms for previous earthquakes occurred in 1959 and 1997, suggests that the tectonic deformation between the Cephalonia Transform Fault Zone and the northern tip of the Hellenic Arc Subduction zone may be accommodated by prevailing right lateral low-dipping faults, occurring on re-activated structures previously experiencing (until Pliocene) compressional regime. Comparison of predicted and observed tsunami data suggests the need of a better characterization of local harbour response for this type of relatively short-wavelength events, which is important in the context of tsunami early warning. However, the suggested dominantly strike-slip character would in turn imply a reduced tsunami hazard as compared to a dominant thrust faulting regime from this source region.

Genesis and evolution of the South Atlantic volcanic islands offshore Brazil

The Brazilian continental margin includes several volcanic islands, submerged volcanic seamounts, and a unique non-volcanic archipelago located in a transform segment of the Equatorial South Atlantic. The mechanism of formation of these islands is related to post-breakup magmatic episodes dated as Late Cretaceous to Pleistocene. Diverse Late Cretaceous to Paleogene alkaline magmatic episodes are registered in southeast Brazil, resulting in igneous plugs onshore and volcanic structures offshore. The Abrolhos Volcanic Complex in eastern Brazil is characterized by several volcanic features on the continental shelf, including small islands that expose Paleogene sedimentary layers interbedded with volcanic sequences. The adjacent Vitoria-Trindade Chain extends to oceanic crust forming basaltic to alkaline seamounts that outcrop at the Trindade Archipelago, the easternmost islands in Brazil with the youngest volcanic eruptions. The Fernando de Noronha lineament in northeast Brazil is characterized by Neogene alkaline igneous plugs. The small islets in the Sao Pedro—Sao Paulo archipelago, located near the mid-Atlantic ridge, are formed by exhumed mantle rocks related to compressional episodes a transform fault zone. The Rio Grande Rise in southern Brazil is characterized by shallow Paleogene seamounts and a large oceanic plateau probably related to subaerial spreading centers formed in the Late Cretaceous. Multiple mechanisms are responsible for the origin and evolution of the volcanic islands offshore Brazil in continental, transitional, and oceanic crust settings, including volcanic build-ups, leaking fracture zones, and hotspots. Some of the islands might be related to mantle plume activity, as indicated by comparisons with modern mantle plume analogues in the South Atlantic.

Evolution of migrating transform faults in anisotropic oceanic crust: examples from Iceland

Major transform fault zones link extensional segments of the North American – Eurasian plate boundary as it transects the Iceland Hotspot. Changes in plate boundary geometry, involving ridge jumps, rift propagation, and related transform fault zone migration, have occurred as the boundary has moved relative to the hotspot. Reconfiguration of transform fault zones occurred at about 6 Ma in northern Iceland and began about 3 Ma in southern Iceland. These systems show a range of different types of transform fault zones, ranging from diffuse, oblique rift zones to narrower, well-defined, transform faults oriented parallel to current plate motions. Crustal deformation structures correlate with the inferred duration and magnitude of strike-slip displacements. Collectively, the different expressions of transform zones may represent different stages of development in an evolutionary sequence that may be relevant for understanding the tectonic history of plate boundaries in Iceland as well as the structure of transform fault zones on more typical parts of the mid-ocean ridge system.