Feature Transfer Learning Research Articles

A hybrid deep learning scheme for MRI-based preliminary multiclassification diagnosis of primary brain tumors.

The diagnosis and treatment of brain tumors have greatly benefited from extensive research in traditional radiomics, leading to improved efficiency for clinicians. With the rapid development of cutting-edge technologies, especially deep learning, further improvements in accuracy and automation are expected. In this study, we explored a hybrid deep learning scheme that integrates several advanced techniques to achieve reliable diagnosis of primary brain tumors with enhanced classification performance and interpretability. This study retrospectively included 230 patients with primary brain tumors, including 97 meningiomas, 66 gliomas and 67 pituitary tumors, from the First Affiliated Hospital of Yangtze University. The effectiveness of the proposed scheme was validated by the included data and a commonly used data. Based on super-resolution reconstruction and dynamic learning rate annealing strategies, we compared the classification results of several deep learning models. The multi-classification performance was further improved by combining feature transfer and machine learning. Classification performance metrics included accuracy (ACC), area under the curve (AUC), sensitivity (SEN), and specificity (SPE). In the deep learning tests conducted on two datasets, the DenseNet121 model achieved the highest classification performance, with five-test accuracies of 0.989 ± 0.006 and 0.967 ± 0.013, and AUCs of 0.999 ± 0.001 and 0.994 ± 0.005, respectively. In the hybrid deep learning tests, LightGBM, a promising classifier, achieved accuracies of 0.989 and 0.984, which were improved from the original deep learning scheme of 0.987 and 0.965. Sensitivities for both datasets were 0.985, specificities were 0.988 and 0.984, respectively, and relatively desirable receiver operating characteristic (ROC) curves were obtained. In addition, model visualization studies further verified the reliability and interpretability of the results. These results illustrated that deep learning models combining several advanced technologies can reliably improve the performance, automation, and interpretability of primary brain tumor diagnosis, which is crucial for further brain tumor diagnostic research and individualized treatment.

Brain Tumor Recognition Using Artificial Intelligence Neural-Networks (BRAIN): A Cost-Effective Clean-Energy Platform

Brain tumors necessitate swift detection and classification for optimal patient outcomes. Deep learning has been extensively utilized to recognize complex tumor patterns in magnetic resonance imaging (MRI) images, aiding in tumor diagnosis, treatment, and prognostication. However, model complexity and limited generalizability with unfamiliar data hinder appropriate clinical integration. The objective of this study is to develop a clean-energy cloud-based deep learning platform to classify brain tumors. Three datasets of a total of 2611 axial MRI images were used to train our multi-layer convolutional neural network (CNN). Our platform automatically optimized every transfer learning and data augmentation feature combination to provide the highest predictive accuracy for our classification task. Our proposed system identified and classified brain tumors successfully and efficiently with an overall precision value of 96.8% [95% CI; 93.8–97.6]. Using clean energy supercomputing resources and cloud platforms cut our workflow to 103 min, $0 in total cost, and a negligible carbon footprint (0.0014 kg eq CO2). By leveraging automated optimized learning, we developed a cost-effective deep learning (DL) platform that accurately classified brain tumors from axial MRI images of different levels. Although studies have identified machine learning tools to overcome these obstacles, only some are cost-effective, generalizable, and usable regardless of experience.

Deep Transfer Learning Using Real-World Image Features for Medical Image Classification, with a Case Study on Pneumonia X-ray Images.

Deep learning has profoundly influenced various domains, particularly medical image analysis. Traditional transfer learning approaches in this field rely on models pretrained on domain-specific medical datasets, which limits their generalizability and accessibility. In this study, we propose a novel framework called real-world feature transfer learning, which utilizes backbone models initially trained on large-scale general-purpose datasets such as ImageNet. We evaluate the effectiveness and robustness of this approach compared to models trained from scratch, focusing on the task of classifying pneumonia in X-ray images. Our experiments, which included converting grayscale images to RGB format, demonstrate that real-world-feature transfer learning consistently outperforms conventional training approaches across various performance metrics. This advancement has the potential to accelerate deep learning applications in medical imaging by leveraging the rich feature representations learned from general-purpose pretrained models. The proposed methodology overcomes the limitations of domain-specific pretrained models, thereby enabling accelerated innovation in medical diagnostics and healthcare. From a mathematical perspective, we formalize the concept of real-world feature transfer learning and provide a rigorous mathematical formulation of the problem. Our experimental results provide empirical evidence supporting the effectiveness of this approach, laying the foundation for further theoretical analysis and exploration. This work contributes to the broader understanding of feature transferability across domains and has significant implications for the development of accurate and efficient models for medical image analysis, even in resource-constrained settings.

Brain–machine interface based on deep learning to control asynchronously a lower-limb robotic exoskeleton: a case-of-study

BackgroundThis research focused on the development of a motor imagery (MI) based brain–machine interface (BMI) using deep learning algorithms to control a lower-limb robotic exoskeleton. The study aimed to overcome the limitations of traditional BMI approaches by leveraging the advantages of deep learning, such as automated feature extraction and transfer learning. The experimental protocol to evaluate the BMI was designed as asynchronous, allowing subjects to perform mental tasks at their own will.MethodsA total of five healthy able-bodied subjects were enrolled in this study to participate in a series of experimental sessions. The brain signals from two of these sessions were used to develop a generic deep learning model through transfer learning. Subsequently, this model was fine-tuned during the remaining sessions and subjected to evaluation. Three distinct deep learning approaches were compared: one that did not undergo fine-tuning, another that fine-tuned all layers of the model, and a third one that fine-tuned only the last three layers. The evaluation phase involved the exclusive closed-loop control of the exoskeleton device by the participants’ neural activity using the second deep learning approach for the decoding.ResultsThe three deep learning approaches were assessed in comparison to an approach based on spatial features that was trained for each subject and experimental session, demonstrating their superior performance. Interestingly, the deep learning approach without fine-tuning achieved comparable performance to the features-based approach, indicating that a generic model trained on data from different individuals and previous sessions can yield similar efficacy. Among the three deep learning approaches compared, fine-tuning all layer weights demonstrated the highest performance.ConclusionThis research represents an initial stride toward future calibration-free methods. Despite the efforts to diminish calibration time by leveraging data from other subjects, complete elimination proved unattainable. The study’s discoveries hold notable significance for advancing calibration-free approaches, offering the promise of minimizing the need for training trials. Furthermore, the experimental evaluation protocol employed in this study aimed to replicate real-life scenarios, granting participants a higher degree of autonomy in decision-making regarding actions such as walking or stopping gait.

CT-based intratumoral and peritumoral deep transfer learning features prediction of lymph node metastasis in non-small cell lung cancer.

The main metastatic route for lung cancer is lymph node metastasis, and studies have shown that non-small cell lung cancer (NSCLC) has a high risk of lymph node infiltration. This study aimed to compare the performance of handcrafted radiomics (HR) features and deep transfer learning (DTL) features in Computed Tomography (CT) of intratumoral and peritumoral regions in predicting the metastatic status of NSCLC lymph nodes in different machine learning classifier models. We retrospectively collected data of 199 patients with pathologically confirmed NSCLC. All patients were divided into training (n = 159) and validation (n = 40) cohorts, respectively. The best HR and DTL features in the intratumoral and peritumoral regions were extracted and selected, respectively. Support Vector Machine (SVM), k-Nearest Neighbors (KNN), Light Gradient Boosting Machine (Light GBM), Multilayer Perceptron (MLP), and Logistic Regression (LR) models were constructed, and the performance of the models was evaluated. Among the five models in the training and validation cohorts, the LR classifier model performed best in terms of HR and DTL features. The AUCs of the training cohort were 0.841 (95% CI: 0.776-0.907) and 0.955 (95% CI: 0.926-0.983), and the AUCs of the validation cohort were 0.812 (95% CI: 0.677-0.948) and 0.893 (95% CI: 0.795-0.991), respectively. The DTL signature was superior to the handcrafted radiomics signature. Compared with the radiomics signature, the DTL signature constructed based on intratumoral and peritumoral areas in CT can better predict NSCLC lymph node metastasis.

Using Transfer Learning and Radial Basis Function Deep Neural Network Feature Extraction to Upgrade Existing Product Fault Detection Systems for Industry 4.0: A Case Study of a Spring Factory

In the era of Industry 3.0, product fault detection systems became important auxiliary systems for factories. These systems efficiently monitor product quality, and as such, substantial amounts of capital were invested in their development. However, with the arrival of Industry 4.0, high-volume low-mix production modes are gradually being replaced by low-volume high-mix production modes, reducing the applicability of existing systems. The extent of investment has prompted factories to seek upgrades to tailor existing systems to suit new production modes. In this paper, we propose an approach to upgrading based on the concept of transfer learning. The key elements are (1) using a framework with a basic model and an add-on model rather than fine-tuning parameters and (2) designing a radial basis function deep neural network (RBF-DNN) to extract important features to construct the basic and add-on models. The effectiveness of the proposed approach is verified using real-world data from a spring factory.

An advanced nomogram model using deep learning radiomics and clinical data for predicting occult lymph node metastasis in lung adenocarcinoma

PurposeTo evaluate the effectiveness of deep learning radiomics nomogram in distinguishing the occult lymph node metastasis (OLNM) status in clinical stage IA lung adenocarcinoma. MethodsA cohort of 473 cases of lung adenocarcinomas from two hospitals was included, with 404 cases allocated to the training cohort and 69 cases to the testing cohort. Clinical characteristics and semantic features were collected, and radiomics features were extracted from the computed tomography (CT) images. Additionally, deep transfer learning (DTL) features were generated using RseNet50. Predictive models were developed using the logistic regression (LR) machine learning algorithm. Moreover, gene analysis was conducted on RNA sequencing data from 14 patients to explore the underlying biological basis of deep learning radiomics scores. ResultThe training and testing cohorts achieved AUC values of 0.826 and 0.775 for the clinical model, 0.865 and 0.801 for the radiomics model, 0.927 and 0.885 for the DTL-radiomics model, and 0.928 and 0.898 for the nomogram model. The nomogram model demonstrated superiority over the clinical model. The decision curve analysis (DCA) revealed a net benefit in predicting OLNM for all models. The investigation into the biological basis of deep learning radiomics scores identified an association between high scores and pathways related to tumor proliferation and immune cell infiltration in the microenvironment. ConclusionsThe nomogram model, incorporating clinical-semantic features, radiomics, and DTL features, exhibited promising performance in predicting OLNM. It has the potential to provide valuable information for non-invasive lymph node staging and individualized therapeutic approaches.

Identification of multiclass tympanic membranes by using deep feature transfer learning and hyperparameter optimization

Middle ear health is a process that generally depends on eardrum health. Middle ear disorders are more common during childhood. Permanent damage may occur in bacterial or viral infections in this region if an early diagnosis is not made. Infectious ear disease, especially known as Otitis Media, is one of the diseases. In this study, morphological features of images are obtained by using various feature extraction methods. Deep feature-based transfer learning and hyperparameter optimization methods were used to detect the presence and type of otitis media. While the EfficientNet convolutional neural network (CNN) model was used to extract deep features, KNN, SVM, and Ensemble classifiers were used as classifiers. Bayesian, Grid Search, and Random Search were used for hyperparameter optimization. As a result of the experiments carried out, it was observed that the classification performance was 99.1%.

Comparison of Domain Selection Methods for Multi-Source Manifold Feature Transfer Learning in Electroencephalogram Classification

Transfer learning (TL) utilizes knowledge from the source domain (SD) to enhance the classification rate in the target domain (TD). It has been widely used to address the challenge of sessional and inter-subject variations in electroencephalogram (EEG)-based brain–computer interfaces (BCIs). However, utilizing knowledge from a combination of both related and non-related sources can significantly deteriorate the classification performance across individual target domains, resulting in a negative transfer (NT). Hence, NT becomes one of the most significant challenges for transfer learning algorithms. Notably, domain selection techniques have been developed to address the challenge of NT emerging from the transfer of knowledge from non-related sources. However, existing domain selection approaches iterate through domains and remove a single low-beneficial domain at a time, which can massively affect the classification performance in each iteration since SDs respond differently to other sources. In this paper, we compare domain selection techniques for a multi-source manifold feature transfer learning (MMFT) framework to address the challenge of NT and then evaluate the effect of beneficial and non-beneficial sources on TL performance. To evaluate the effect of low-beneficial and high beneficial sources on TL performance, some commonly used domain selection methods are compared, namely, domain transferability estimation (DTE), rank of domain (ROD), label similarity analysis, and enhanced multi-class MMFT (EMC-MMFT), using the same multi-class cross-session and cross-subject classification problems. The experimental results demonstrate the superiority of the EMC-MMFT algorithm in terms of minimizing the effect of NT. The highest classification accuracy (CA) of 100% is achieved when optimal combinations of high beneficial sources are selected for two-class SSMVEP problems, while the highest CAs of 98% and 87% are achieved for three- and four-class SSMVEP problems, respectively. The highest CA of 98% is achieved for two-class MI classification problems, while the highest CAs of 90% and 71.5% are obtained for three- and four-class MI problems, respectively.

A Degradation Prediction Method for PEM Fuel Cell Based on Deep Temporal Feature Extraction and Transfer Learning

The increasing environmental issues such as air pollution and energy scarcity of fossil fuels require the acceleration of the electrification in various fields, especially for the transportation. According to this development trend, fuel cell systems gradually become a potential alternative to traditional power systems for high efficiency, high energy density and zero pollution, while the relatively short life time has tremendously limited its large-scale commercial application. To extend the fuel cell lifespan, degradation predictive methods are proved to have outstanding effect. In this article, a hybrid prediction model based on deep temporal feature extraction and transfer learning is proposed. Firstly, the health index is constructed by extracting the fuel cell degradation features through a temporal convolutional network; on this basis, transfer learning is performed according to the feature extraction, and finally the extracted features are input into the long short-term memory model to complete the fuel cell degradation prediction. The effectiveness of the algorithm is verified with experimentally extracting degradation data under different operating conditions, and the results show that the proposed method can effectively improve the prediction accuracy and decrease the computation by extracting key parameters of fuel cell degradation and is independent of operating conditions.

Coffee disease detection and classification using image processing: A Literature review

Coffee, as one of the world's most consumed beverages, sustains livelihoods for millions across more than 50 nations. The vulnerability of coffee plants to diseases, particularly Coffee Leaf Rust and Coffee Berry Disease, poses a significant threat to global production and quality. Leveraging advancements in image processing and computer vision, researchers have explored diverse classification algorithms, ranging from traditional Support Vector Machines to state-of-the-art Deep Convolutional Neural Networks (DCNNs). This review literature addresses the challenges of coffee disease detection, emphasizing the need for precise and early identification. Notable studies have achieved commendable accuracies, such as SVMs reaching 96% and DCNNs demonstrating precision but with extended training times. Innovations like feature concatenation, transfer learning, and ensemble methods have emerged as strategies to overcome classification limitations. Recent breakthroughs showcase impressive results, including DenseNet models achieving a classification accuracy of 99.57% and MobileNetV2 reaching 99.93%. Additionally, Convolutional Neural Networks and VGG-19 architecture demonstrated a promising F1-Score of 90% in classifying various coffee leaf diseases. This concludes with a vision for ongoing advancements, emphasizing the fusion of image processing and machine learning technologies to safeguard the global coffee industry by enabling early and accurate disease detection.

Monitoring of key Camellia Oleifera phenology features using field cameras and deep learning

A rapid and accurate yield estimation is of great significance to the management and sustainable development of Camellia Oleifera forests. Consequently, the simultaneous and accurate detection of key phenology features of Camellia Oleifera (buds, flowers, fruits) is crucial for precise yield estimation. This not only enables robotic harvesting but also allows for the prediction of peak flowering and fruit ripening periods to determine the optimal harvesting time. However, in recent studies, only Camellia Oleifera fruits have been marked and detected. Therefore, to enable rapid yield estimation, it is necessary to simultaneously detect the key phenology stages (buds, flowers, fruits) of Camellia Oleifera. In this study, we annotated, trained, and predicted Camellia Oleifera buds, flowers, and fruits collected via field cameras to observe their daily quantitative changes. Quantity change curves were generated to estimate crucial phenology stages. Phenology feature detection and transfer learning were performed using the YOLO v5 model, widely used YOLO v3 model, and CenterNet model with center point prediction, all trained on the same dataset. The best model for phenology feature detection was selected based on a comparison of average precision, with the YOLO v5 model achieving a higher mean Average Precision (mAP) value of 91.31 % compared to the CenterNet (85.43 %) and YOLO v3 (81.00 %) models. In YOLO v5, the AP values for bud, flower, and fruit detection were 82.80 %, 98.13 %, and 92.99 %, respectively, surpassing the CenterNet model by 3.97 %, 2.44 %, and 11.23 %, and the YOLO v3 model by 6.39 %, 17.13 %, and 11.67 %. The image size was adapted from 4000 × 3000 pixels to 512 × 512 pixels for model optimization. Additionally, data from the Seedling Center of Liuyang City collected at different years and times were utilized to showcase the generalizability and scalability of the selected models, resulting in mAP values of 86.14 %, 80.17 %, and 69.20 % for the three above-mentioned models respectively. The plotted phenology change curves unveiled that Camellia Oleifera undergoes four stages: fruit enlargement period, bud enlargement period, flowering period, and flower wilting period. The conclusion can be drawn that using field cameras and YOLOv5 can simultaneously achieve real-time detection of key phenology features (buds, flowers, and fruits) of Camellia Oleifera, in order to further record crucial phenology patterns (such as flowering peaks and fruit ripening periods). This study offers theoretical references and scientific evidence for monitoring changes in key phenology features of Camellia Oleifera.

Benign and malignant classification of breast tumor ultrasound images using conventional radiomics and transfer learning features: A multicenter retrospective study

This study aims to establish an effective benign and malignant classification model for breast tumor ultrasound images by using conventional radiomics and transfer learning features. We collaborated with a local hospital and collected a base dataset (Dataset A) consisting of 1050 cases of single lesion 2D ultrasound images from patients, with a total of 593 benign and 357 malignant tumor cases. The experimental approach comprises three main parts: conventional radiomics, transfer learning, and feature fusion. Furthermore, we assessed the model's generalizability by utilizing multicenter data obtained from Datasets B and C. The results from conventional radiomics indicated that the SVM classifier achieved the highest balanced accuracy of 0.791, while XGBoost obtained the highest AUC of 0.854. For transfer learning, we extracted deep features from ResNet50, Inception-v3, DenseNet121, MNASNet, and MobileNet. Among these models, MNASNet, with 640-dimensional deep features, yielded the optimal performance, with a balanced accuracy of 0.866, AUC of 0.937, sensitivity of 0.819, and specificity of 0.913. In the feature fusion phase, we trained SVM, ExtraTrees, XGBoost, and LightGBM with early fusion features and evaluated them with weighted voting. This approach achieved the highest balanced accuracy of 0.964 and AUC of 0.981. Combining conventional radiomics and transfer learning features demonstrated clear advantages over using individual features for breast tumor ultrasound image classification. This automated diagnostic model can ease patient burden and provide additional diagnostic support to radiologists. The performance of this model encourages future prospective research in this domain.

Deep learning algorithm-based multimodal MRI radiomics and pathomics data improve prediction of bone metastases in primary prostate cancer

PurposeBone metastasis is a significant contributor to morbidity and mortality in advanced prostate cancer, and early diagnosis is challenging due to its insidious onset. The use of machine learning to obtain prognostic information from pathological images has been highlighted. However, there is a limited understanding of the potential of early prediction of bone metastasis through the feature combination method from various sources. This study presents a method of integrating multimodal data to enhance the feasibility of early diagnosis of bone metastasis in prostate cancer.Methods and materialsOverall, 211 patients diagnosed with prostate cancer (PCa) at Gansu Provincial Hospital between January 2017 and February 2023 were included in this study. The patients were randomized (8:2) into a training group (n = 169) and a validation group (n = 42). The region of interest (ROI) were segmented from the three magnetic resonance imaging (MRI) sequences (T2WI, DWI, and ADC), and pathological features were extracted from tissue sections (hematoxylin and eosin [H&E] staining, 10 × 20). A deep learning (DL) model using ResNet 50 was employed to extract deep transfer learning (DTL) features. The least absolute shrinkage and selection operator (LASSO) regression method was utilized for feature selection, feature construction, and reducing feature dimensions. Different machine learning classifiers were used to build predictive models. The performance of the models was evaluated using receiver operating characteristic curves. The net clinical benefit was assessed using decision curve analysis (DCA). The goodness of fit was evaluated using calibration curves. A joint model nomogram was eventually developed by combining clinically independent risk factors.ResultsThe best prediction models based on DTL and pathomics features showed area under the curve (AUC) values of 0.89 (95% confidence interval [CI], 0.799–0.989) and 0.85 (95% CI, 0.714–0.989), respectively. The AUC for the best prediction model based on radiomics features and combining radiomics features, DTL features, and pathomics features were 0.86 (95% CI, 0.735–0.979) and 0.93 (95% CI, 0.854–1.000), respectively. Based on DCA and calibration curves, the model demonstrated good net clinical benefit and fit.ConclusionMultimodal radiomics and pathomics serve as valuable predictors of the risk of bone metastases in patients with primary PCa.

Unsupervised domain adaptation via feature transfer learning based on elastic embedding

Unsupervised domain adaptation via feature transfer learning based on elastic embedding

Breast Tumor Classification with Enhanced Transfer Learning Features and Selection Using Chaotic Map-Based Optimization

Among women, breast cancer remains one of the most dominant cancer types. In the year 2022, around 2,87,800 new cases were diagnosed, and 43,200 women faced mortality due to this disease. Analysis and processing of mammogram images is vital for its earlier identification and thus helps in reducing mortality rates and facilitating effective treatment for women. Accordingly, several deep-learning techniques have emerged for mammogram classification. However, it is still challenging and requires promising solutions. This study proposed a newer automated computer-aided implementation for breast cancer classification. The work starts with enhancing the mammogram contrast using a haze-reduced adaptive technique followed by augmentation. Afterward, EfficientNet-B4 pre-trained architecture is trained for both original and enhanced sets of mammograms individually using static hyperparameters’ initialization. This provides an output of 1792 feature vectors for each set and then fused using a serial mid-value-based approach. The final feature vectors are then optimized using a chaotic-crow-search optimization algorithm. Finally, the obtained significant feature vectors were classified with the aid of machine learning algorithms. The evaluation is made using INbreast and CBIS-DDSM databases. The proposed framework attained a balanced computation time with a maximum classification performance of 98.459 and 96.175% accuracies on INbreast and CBIS-DDSM databases, respectively.

SyntDiaNet: Integrating feature extraction, transfer learning and classifier-embedded generative adversarial network for advanced pneumonia diagnosis

SyntDiaNet: Integrating feature extraction, transfer learning and classifier-embedded generative adversarial network for advanced pneumonia diagnosis

Physics‐informed deep learning study for MHD particle‐fluid suspension flow with heat transfer in porous annular‐sector duct

AbstractThermal enhancement remains a critical requirement in different engineering applications. Many factors can affect the efficiency of the techniques used for this aim. The purpose of this study is to investigate the impact of particle‐fluid suspensions with heat transfer through porous annular‐sector duct on enhancement techniques and address the potential application of deep learning to suspension problems. The analysis is focused on the fully developed region of the forced convection flow. Thermal and rheological properties of particle‐fluid suspensions were studied using physics‐informed neural networks exploiting transfer learning capabilities for making parameter analysis. Another finite element solution was introduced as a measure of accuracy and to support our findings. Results were prepared in a comparative manner for both solvers including contour plots, tabular, and two dimensional figures. The average Nusselt number and friction factors were calculated for different cases to investigate the value of the thermal performance factor. Our results indicate the downside of suspensions on thermal enhancement and their negative impact on other techniques.

Enhancing source domain availability through data and feature transfer learning for building power load forecasting

Enhancing source domain availability through data and feature transfer learning for building power load forecasting

Enhanced corn seed disease classification: leveraging MobileNetV2 with feature augmentation and transfer learning

In the era of advancing artificial intelligence (AI), its application in agriculture has become increasingly pivotal. This study explores the integration of AI for the discriminative classification of corn diseases, addressing the need for efficient agricultural practices. Leveraging a comprehensive dataset, the study encompasses 21,662 images categorized into four classes: Broken, Discolored, Silk cut, and Pure. The proposed model, an enhanced iteration of MobileNetV2, strategically incorporates additional layers—Average Pooling, Flatten, Dense, Dropout, and softmax—augmenting its feature extraction capabilities. Model tuning techniques, including data augmentation, adaptive learning rate, model checkpointing, dropout, and transfer learning, fortify the model's efficiency. Results showcase the proposed model's exceptional performance, achieving an accuracy of ~96% across the four classes. Precision, recall, and F1-score metrics underscore the model's proficiency, with precision values ranging from 0.949 to 0.975 and recall values from 0.957 to 0.963. In a comparative analysis with state-of-the-art (SOTA) models, the proposed model outshines counterparts in terms of precision, recall, F1-score, and accuracy. Notably, MobileNetV2, the base model for the proposed architecture, achieves the highest values, affirming its superiority in accurately classifying instances within the corn disease dataset. This study not only contributes to the growing body of AI applications in agriculture but also presents a novel and effective model for corn disease classification. The proposed model's robust performance, combined with its competitive edge against SOTA models, positions it as a promising solution for advancing precision agriculture and crop management.